ZH

RU

ES

analysis test english

analysis test english, Total:500 items.

In the international standard classification, analysis test english involves: Medical equipment, Equipment for petroleum and natural gas industries, Sensory analysis, Paint ingredients, Transport, Space systems and operations, Electrical engineering in general, Nuclear energy engineering, Electrical wires and cables, Sterilization and disinfection, Electricity. Magnetism. Electrical and magnetic measurements, Construction materials, Analytical chemistry, Fibre optic communications, Quality, Aircraft and space vehicles in general, Air quality, Test conditions and procedures in general, Galvanic cells and batteries, Milk and milk products, Bearings, Fuels, Coals, Products of the chemical industry, Electrical accessories, Acoustics and acoustic measurements, Hydraulic energy engineering, Components for aerospace construction, Aerospace electric equipment and systems, Microbiology, Measurement of volume, mass, density, viscosity, Paints and varnishes, Construction of airports, Inorganic chemicals, Organic chemicals, Sugar. Sugar products. Starch, Information sciences. Publishing, Technical product documentation, Pulps, Laboratory medicine, Accident and disaster control, Telecommunication systems, Road vehicle systems, Ergonomics, IT terminal and other peripheral equipment, Electromechanical components for electronic and telecommunications equipment, Piezoelectric and dielectric devices, Shipbuilding and marine structures in general, Fluid storage devices, Components and accessories for telecommunications equipment, Earthworks. Excavations. Foundation construction. Underground works, Materials for aerospace construction, Pipeline components and pipelines, Raw materials for rubber and plastics, Wind turbine systems and other alternative sources of energy, Water quality, Optoelectronics. Laser equipment, Animal feeding stuffs, Coatings and related processes used in aerospace industry, Graphical symbols, Solar energy engineering, Metrology and measurement in general, Environmental protection, Petroleum products in general, Non-metalliferous minerals, Crude petroleum, Aerospace engines and propulsion systems, Extraction and processing of petroleum and natural gas, Software development and system documentation, Testing of metals, Non-ferrous metals, Semiconductor devices, On-board equipment and instruments, General methods of tests and analysis for food products, Wastes, Environmental testing, Natural gas, Linear and angular measurements, Plastics, Vocabularies, Textile fibres, Metalliferous minerals, Hand-held tools, Railway rolling stock, Mining and quarrying, Edible oils and fats. Oilseeds, Meat, meat products and other animal produce, Applications of information technology, Lifting equipment.


GM Europe, analysis test english

  • GME L0004-2008 Pr黤鰈 Test Oil English/German
  • GME GMI 60288-2001 Abrasion Test for Textile Fabrics (English/German)
  • GME OPEL 298-1987 Compatibility Test for Underbody Protective Wax (English/German)
  • GME GMI R-7B03-7-1999 High Speed and Oil Spillage Test of Vehicles with Automatic Transmission (English/German)
  • GME OPEL 107-1979 Microscopic Test of Cast Iron by Means of Structure Rating Charts (English/German)
  • GME GMI L-7B01D-14-1998 FWD Output Gear Toothing Fatigue Test (English/German; Includes Appendix 1; ITDC Release, Draft for Harmonization)
  • GME 14032-2007 Modal Analysis, Test and Evaluation
  • GME14441-2009 Fuse Protection Analysis English; This specification may be applied only for current projects incl. Global Epsilon e (37
  • GME GMI L-7B01D-9-1997 Fatigue Test of External Shift Mechanism FWD and RWD Manual Transmission (English/German; ITDC Release, Draft for Harmonization)
  • GME14032-2007 Modalanalyse, Pr眉fung und Auswertung Modal Analysis, Test and Evaluation English/German; Note: This specification may be applied only for current projects incl. Global Epsilon e (37
  • GME GMI 60336-2000 W盲rmealterung von Polsterbez眉gen Test Method for Determining the Heat Ageing Resistance of Upholstery Trim Materials English/German [Replaced: GME GME 60336]

German Institute for Standardization, analysis test english

  • DIN 58220-3:2021 Visual acuity testing - Part 3: Test for use in expertise; Text in German and English
  • DIN 58220-3:2013 Visual acuity testing - Part 3: Test for use in expertise; Text in German and English
  • DIN EN ISO 10418 Berichtigung 1:2009 Petroleum and natural gas industries - Offshore production installations - Analysis, desgin, installation and testing of basic surface process safety systems (ISO 10418:2003); English version EN ISO 10418:2003, Corrigendum to DIN EN ISO 10418:2005-07; Eng
  • DIN ISO 16779:2017 Sensory analysis - Assessment (determination and verification) of the shelf life of foodstuffs (ISO 16779:2015); Text in German and English
  • DIN 58220-5:2013 Visual acuity testing - Part 5: Vision screening test for general use; Text in German and English
  • DIN 58220-5:2021 Visual acuity testing - Part 5: Vision screening test for general use; Text in German and English
  • DIN 58220-6:2021 Visual acuity testing - Part 6: Road traffic related vision screening test; Text in German and English
  • DIN 58220-6:2013 Visual acuity testing - Part 6: Road traffic related vision screening test; Text in German and English
  • DIN EN ISO 18314-1:2017 Analytical colorimetry - Part 1: Practical colour measurement (ISO 18314-1:2015); German and English version prEN ISO 18314-1:2017
  • DIN 81208-22:2010 Manoeuvring of ships - Part 22: Wind tunnel test; Text in German and English
  • DIN EN 16602-40-02:2014 Space product assurance - Hazard analysis; English version EN 16602-40-02:2014
  • DIN EN 16603-31-04:2019 Space engineering - Exchange of thermal analysis data; English version EN 16603-31-04:2019
  • DIN 70080:2020 Electric road vehicles - Test procedures for determination of charging performance; Text in English
  • DIN 81208-20:2010 Manoeuvring of ships - Part 20: Rotating arm test; Text in German and English
  • DIN EN 16603-10-03:2022 Space engineering - Testing; English version EN 16603-10-03:2022
  • DIN EN 16603-10-03:2021 Space engineering - Testing; English version prEN 16603-10-03:2021
  • DIN EN IEC 61744:2021 Calibration of fibre optic chromatic dispersion test sets (IEC 86/569/CD:2020); Text in English
  • DIN EN 16602-30-09:2014 Space product assurance - Availability analysis; English version EN 16602-30-09:2014
  • DIN 81208-21:2010 Manoeuvring of ships - Part 21: Oblique towing test; Text in German and English
  • DIN ISO 15472:2020 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales (ISO 15472:2010); Text in English
  • DIN EN ISO 18314-3:2017 Analytical colorimetry - Part 3: Special indices (ISO 18314-3:2015); German and English version prEN ISO 18314-3:2017
  • DIN 58950-3:2011 Sterilization - Steam sterilizers for pharmaceutical products - Part 3: Tests; Text in German and English
  • DIN SPEC 91373-2:2021 Magnetocalorics - Part 2: Measurement of magnetocaloric properties; Text in English
  • DIN 58220-7:2013 Visual acuity testing - Part 7: Mesopic contrast vision, without and with glare, for road traffic related vision testing; Text in German and English
  • DIN 58220-7:2021 Visual acuity testing - Part 7: Mesopic contrast vision, without and with glare, for road traffic related vision testing; Text in German and English
  • DIN 50989-2:2021 Ellipsometry - Part 2: Bulk material model; Text in German and English
  • DIN EN ISO 12460-3:2023 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO/FDIS 12460-3:2023); German and English version prEN ISO 12460-3:2023
  • DIN EN ISO 15027-3:2023 Immersion suits - Part 3: Test methods (ISO/DIS 15027-3:2023); German and English version prEN ISO 15027-3:2023
  • DIN ISO 16242:2020 Surface chemical analysis - Recording and reporting data in Auger electron spectroscopy (AES) (ISO 16242:2011); Text in English
  • DIN EN 12350-3:2017 Testing fresh concrete - Part 3: Vebe test; German and English version prEN 12350-3:2017
  • DIN EN ISO 7965-1:2023 Packaging - Drop test - Part 1: Paper sacks (ISO/DIS 7965-1:2023); German and English version prEN ISO 7965-1:2023
  • DIN ISO 18516:2020 Surface chemical analysis - Determination of lateral resolution and sharpness in beam based methods with a range from nanometers to micrometers (ISO 18516:2019); Text in English
  • DIN 58141-4:2014 Measurement of fiber optic elements - Part 4: Determination of diameters and thicknesses of optical fibers; Text in German and English
  • DIN EN ISO 23913:2009 Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006); English version of DIN EN ISO 23913:2009-09
  • DIN 58141-3:2021 Measurement of fiber optic elements - Part 3: Determination of acceptance angle of light guides; Text in German and English
  • DIN EN 9136:2018 Aerospace series - Root cause analysis and problem solving (9S Methodology); German and English version EN 9136:2018
  • DIN EN 1948-4:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version EN 1948-4:2010+A1:2013
  • DIN 58141-1:2015 Measurement of fiber optic elements - Part 1: Determination of attenuation of optical fibres; Text in German and English
  • DIN 58141-1:2011 Measurement of fiber optic elements - Part 1: Determination of attenuation of optical fibres; Text in German and English
  • DIN EN 12350-6:2017 Testing fresh concrete - Part 6: Density; German and English version prEN 12350-6:2017
  • DIN 58141-2:2012 Measurement of fiber optic elements - Part 2: Determination of spectral transmittance of light guides; Text in German and English
  • DIN 58141-11:2013 Measurement of fiber optic elements - Part 11: Determination of photometric characteristics of side emitting light guides; Text in German and English
  • DIN EN 12350-4:2017 Testing fresh concrete - Part 4: Degree of compactability; German and English version prEN 12350-4:2017
  • DIN EN ISO 17678:2017 Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) (ISO/DIS 17678:2017); German and English version prEN ISO 17678:2017
  • DIN ISO 15242-1:2017 Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals (ISO 15242-1:2015); Text in German and English
  • DIN 58141-7:2013 Measurement of fiber optic elements - Part 7: Determination of tensile load of fiber optic cables; Text in German and English
  • DIN EN 12390-3:2017 Testing hardened concrete - Part 3: Compressive strength of test specimens; German and English version prEN 12390-3:2017
  • DIN EN 12390-5:2017 Testing hardened concrete - Part 5: Flexural strength of test specimens; German and English version prEN 12390-5:2017
  • DIN 58912-1:2021 Haemostaseology - Determination of the antithrombin activity - Part 1: Reference measurement procedure using a synthetic peptide substrate; Text in German and English
  • DIN 45689-1:2020 Acoustics - Determination of aircraft noise immission at airports - Part 1: Calculation method; Text in German and English
  • DIN EN ISO 105-B04:2023 Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (ISO/DIS 105-B04:2023); German and English version prEN ISO 105-B04:2023
  • DIN EN 4662:2010 Aerospace series - Test specification for vibration control components; German and English version EN 4662:2010
  • DIN EN 16602-40-12:2014 Space product assurance - Fault tree analysis - Adoption notice ECSS/IEC 61025; English version EN 16602-40-12:2014
  • DIN EN 3745-501:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test; German and English version EN 3745-501:2005
  • DIN 58943-3:2011 Medical microbiology - Diagnosis of tuberculosis - Part 3: Detection of mycobacteria by culture methods; Text in German and English
  • DIN 58141-5:2011 Measurement of fiber optic elements - Part 5: Determination of visual defects of light and image guides; Text in German and English
  • DIN SPEC 91143-2:2012-09 Modern rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
  • DIN 45684-1:2013 Acoustics - Determination of aircraft noise exposure at airfields - Part 1: Calculation method; Text in German and English
  • DIN 10972:2003-08 Sensory analysis - A - not A test
  • DIN EN 4862:2021 Rotorcraft - Constant Wear Lifejackets - Requirements, testing and marking; English version prEN 4862:2021
  • DIN EN ISO 19105:2020 Geographic information - Conformance and testing (ISO/DIS 19105:2020); English version prEN ISO 19105:2020
  • DIN 13200-1:2015 Voice prostheses - Part 1: Test methods for the evaluation of physical characteristics; Text in German and English
  • DIN EN 13975:2003 Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects; German version EN 13975:2003, German and English texts
  • DIN ISO 16269-8:2009 Statistical interpretation of data - Part 8: Determination of prediction intervals (ISO 16269-8:2004); Text in German and English
  • DIN 58141-10:2011 Measurement of fiber optic elements - Part 10: Determination of illuminance and effective aperture angle of cold light sources; Text in German and English
  • DIN 58141-6:2011 Measuring of fiber optic elements - Part 6: Determination of the mechanical bending radius for short-term applications of optical fibers; Text in German and English
  • DIN EN 3745-404:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock; German and English version EN 3745-404:2005
  • DIN EN ISO 105-C12:2023 Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering (ISO/DIS 105-C12:2023); German and English version prEN ISO 105-C12:2023
  • DIN EN 3745-406:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test; German and English version EN 3745-406:2005
  • DIN 10976:2016 Sensory analysis - Difference from Control-Test (DfC-Test)
  • DIN 10976:2016-08 Sensory analysis - Difference from Control-Test (DfC-Test)
  • DIN 58940-7:2009 Medical microbiology - Susceptibility testing of microbial pathogens to antimicrobial agents - Part 7: Determination of the minimum bactericidal concentration (MBC) with the method of microbouillondilution; Text in German and English
  • DIN 58932-3:2017 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrozytes; Text in German and English
  • DIN SPEC 91461:2021 Stress-testing resilience of critical infrastructures exposed to cyber-physical threats; Text in English
  • DIN EN ISO 4120:2021-06 Sensory analysis - Methodology - Triangle test (ISO 4120:2021); German version EN ISO 4120:2021
  • DIN 10970:2002-09 Sensory analysis - Time intensity test
  • DIN 10973:2013-06 Sensory analysis - In/out test
  • DIN EN 12390-2:2017 Testing hardened concrete - Part 2: Making and curing specimens for strength tests; German and English version prEN 12390-2:2017
  • DIN EN ISO 9241-307:2009 Ergonomics of human-system interaction - Part 307: Analysis and compliance test methods for electronic visual displays (ISO 9241-307:2008); English version of DIN EN ISO 9241-307:2009-06
  • DIN EN 3475-812:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 812: Return loss (VSWR); German and English version EN 3475-812:2009
  • DIN EN 3475-809:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance; German and English version EN 3475-809:2009
  • DIN EN 3745-412:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance; German and English version EN 3745-412:2005
  • DIN EN 3475-811:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation; German and English version EN 3475-811:2009
  • DIN EN 3475-802:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance; German and English version EN 3475-802:2009
  • DIN EN 12350-1:2017 Testing fresh concrete - Part 1: Sampling and common apparatus; German and English version prEN 12350-1:2017
  • DIN EN 12350-7:2017 Testing fresh concrete - Part 7: Air content - Pressure methods; German and English version prEN 12350-7:2017
  • DIN 58141-9:2013 Measurement of fiber optic elements - Part 9: Determination of deviation of the roundness and the concentricity of optical fibres; Text in German and English
  • DIN EN 12350-3:2009 Testing fresh concrete - Part 3: Vebe test; English version of DIN EN 12350-3:2009-08
  • DIN ISO 13643-6:2018 Ships and marine technology - Manoeuvring of ships - Part 6: Model test specials (ISO 13643-6:2017); Text in German and English
  • DIN EN 13445-5 Corrigendum 1:2003 Unfired pressure vessels - Part 5: Inspection and testing Corrigendum 1 to English version of DIN EN 13445-5:2002-08
  • DIN EN ISO 3262-14:2023-10 Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2023); German version EN ISO 3262-14:2023
  • DIN EN ISO 22476-12:2009 Geotechnical investigation and testing - Field testing - Part 12: Mechanical cone penetration test (CPTM) (ISO 22476-12:2009); English version of DIN EN ISO 22476-12:2009-10
  • DIN EN 3094:2018-01 Aerospace series - Sealants - Test method - determination of the application time; German and English version EN 3094:2017
  • DIN EN 4875:2020-03 Aerospace series - Surface treatments - Test method for measurement of electrical contact resistance; German and English version EN 4875:2020
  • DIN EN ISO 13585:2023 Brazing - Qualification testing of brazers and brazing operators (ISO 13585:2021); German and English version prEN ISO 13585:2023
  • DIN EN 16602-70-45:2015 Space product assurance - Mechanical testing of metallic materials; English version EN 16602-70-45:2014
  • DIN EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015); German and English version EN ISO 6259-1:2015
  • DIN EN 3475-810:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 810: Structural return loss; German and English version EN 3475-810:2009
  • DIN EN ISO 3262-12:2023 Extenders - Specifications and methods of test - Part 12: Muscovite-type mica (ISO/DIS 3262-12:2023); German and English version prEN ISO 3262-12:2023
  • DIN EN 2591-415:2002 Aerospace series - Elements of electrical and optical connections; Test methods - Part 415: Test probe damage (female contacts); German and English version EN 2591-415:2001
  • DIN 45684-2:2015 Acoustics - Determination of aircraft noise exposure at airfields - Part 2: Determination of acoustic and flight operation parameters; Text in German and English
  • DIN EN 12390-7:2017 Testing hardened concrete - Part 7: Density of hardened concrete; German and English version prEN 12390-7:2017
  • DIN EN 1948-4:2014-03 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version EN 1948-4:2010+A1:2013
  • DIN EN ISO 10399:2018-04 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017); German version EN ISO 10399:2018
  • DIN EN 12350-5:2009 Testing fresh concrete - Part 5: Flow table test; English version of DIN EN 12350-5:2009-08
  • DIN EN 12350-2:2009 Testing fresh concrete - Part 2: Slump-test; English version of DIN EN 12350-2:2009-08
  • DIN EN 3475-412:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance; German and English version EN 3475-412:2002
  • DIN 58175-1:2013 Lasers and laser-related equipment - Determination of the properties of ultra-short laser pulses - Part 1: Principles; Text in German and English
  • DIN EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility; German and English version EN 3102:2013
  • DIN EN 4195:2012 Aerospace series - Paints and varnishes - Test method for determination of chromate leaching; German and English version EN 4195:2011
  • DIN EN ISO 9862:2023 Geosynthetics - Sampling and preparation of test specimens (ISO/DIS 9862:2022); German and English version prEN ISO 9862:2022
  • DIN EN 3475-806:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation; English version prEN 3475-806:2023
  • DIN 85005-4:2012 Ships and marine technology - Graphical symbols for technical documentation - Part 4: Sounding pipes, air pipes and filling pipes; Text in German and English
  • DIN EN ISO 3262-22:2023 Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO/DIS 3262-22:2023); German and English version prEN ISO 3262-22:2023
  • DIN 58175-2:2013 Lasers and laser-related equipment - Determination of the properties of ultra-short laser pulses - Part 2: Autocorrelation measurement method; Text in German and English
  • DIN 58175-2:2021 Lasers and laser-related equipment - Determination of the properties of ultra-short laser pulses - Part 2: Autocorrelation measurement method; Text in German and English
  • DIN EN ISO 23739:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of zirconium oxide powders (ISO 23739:2021); German and English version prEN ISO 23739:2023
  • DIN EN 16602-30-02:2014 Space product assurance - Failure modes, effects (and criticality) analysis (FMEA/FMECA); English version EN 16602-30-02:2014
  • DIN EN 3475-606:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 606: Wicking Test on Textile Braid Insulation; English version prEN 3475-606:2023
  • DIN EN 12350-1:2009 Testing fresh concrete - Part 1: Sampling; English version of DIN EN 12350-1:2009-08
  • DIN ISO 11843-5:2010 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases (ISO 11843-5:2008); Text in German and English
  • DIN CEN/TR 15522-2:2012 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses; English version CEN/TR 15522-2:2012
  • DIN EN 4171:2012 Aerospace series - Paints and varnishes - Test method for determination of phosphoric acid index; German and English version EN 4171:2011
  • DIN EN 4592:2007-09 Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance; German and English version EN 4592:2006
  • DIN EN 61850-10:2014 Communication networks and systems for power utility automation - Part 10: Conformance testing (IEC 61850-10:2012); English version EN 61850-10:2013
  • DIN EN 3475-408:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance; English version prEN 3475-408:2023
  • DIN ISO 16129:2020 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
  • DIN EN 16215:2020 Animal feeding stuffs: Methods of sampling and analysis - Determination of dioxins and dioxin-like PCBs by GC/HRMS and of indicator PCBs by GC/HRMS
  • DIN EN 16215:2020-05 Animal feeding stuffs: Methods of sampling and analysis - Determination of dioxins and dioxin-like PCBs by GC/HRMS and of indicator PCBs by GC/HRMS; German version EN 16215:2020
  • DIN 10960:2000-06 Apparatus for sensory analysis - Wine testing glasses
  • DIN 10964:2014-11 Sensory analysis - Simple descriptive test
  • DIN EN ISO 5495:2016-10 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 + Cor 1:2006 + Amd 1:2016); German version EN ISO 5495:2007 + A1:2016
  • DIN 58943-32:2011 Medical microbiology - Diagnosis of tuberculosis - Part 32: Detection of mycobacteria by microscopic methods; Text in German and English
  • DIN 58943-32:2015 Medical microbiology - Diagnosis of tuberculosis - Part 32: Detection of mycobacteria by microscopic methods; Text in German and English
  • DIN ISO 3402:2023 Tobacco and tobacco products - Atmosphere for conditioning and testing (ISO 3402:2023); Text in German and English
  • DIN ISO 9462:2023 Alpine ski-bindings - Requirements and test methods (ISO 9462:2023); Text in German and English
  • DIN EN ISO 16407-1:2018 Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-1 - Part 1: Test suite structure and test purposes (ISO 16407-1:2017); English version EN ISO 16407-1:2017
  • DIN EN ISO 16410-1:2018 Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 1: Test suite structure and test purposes (ISO 16410-1:2017); English version EN ISO 16410-1:2017
  • DIN 58908:2015 Haemostaseology - Determination of activated partial thromboplastin time (APTT) - Reference measurement procedure; Text in German and English
  • DIN 58141-8:2011 Measurement of fiber optic elements - Part 8: Determination of the mechanical bendig radius for short-term applications of light guide cables; Text in German and English
  • DIN EN 3745-510:2017 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test; German and English version EN 3745-510:2017
  • DIN EN 3745-510:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test; German and English version EN 3745-510:2012
  • DIN EN 3475-413:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test; German and English version EN 3475-413:2002
  • DIN EN ISO 21570 Corrigendum 1:2007 Foodstuffs-Methods of analysis for the detection of genetically modified organisms and derived products-Quantitative nucleic acid based methods(ISO 21570:2005) Corrigendum 1 to English version of DIN EN ISO 21570:2006-02
  • DIN EN 6037:2016-02 Aerospace series - Fibre reinforced plastics - Test method - Determination of bearing strength; German and English version EN 6037:2015
  • DIN EN ISO 14880-2:2023 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO/DIS 14880-2:2023); German and English version prEN ISO 14880-2:2023
  • DIN EN ISO 14880-4:2023 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO/DIS 14880-4:2023); German and English version prEN ISO 14880-4:2023
  • DIN EN 12350-4:2009 Testing fresh concrete - Part 4: Degree of compactability; English version of DIN EN 12350-4:2009-08
  • DIN EN 12390-3:2009 Testing hardened concrete - Part 3: Compressive strength of test specimens; English version of DIN EN 12390-3:2009-07
  • DIN EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens; English version of DIN EN 12390-5:2009-07
  • DIN EN 3475-805:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 805: Characteristic impedance; English version prEN 3475-805:2023
  • DIN EN ISO 3262-13:2023-09 Extenders - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:2023); German version EN ISO 3262-13:2023
  • DIN ISO 15242-2:2017 Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface (ISO 15242-2:2015); Text in German and English
  • DIN EN 3475-806:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 806: Attenuation; German and English version EN 3475-806:2002
  • DIN EN 3475-808:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 808: Cross-talk; German and English version EN 3475-808:2002
  • DIN EN ISO 4120:2021 Sensory analysis - Methodology - Triangle test (ISO 4120:2021); German version EN ISO 4120:2021
  • DIN EN 63154:2018 Maritime navigation and radiocommunication equipment and systems - Cybersecurity - General requirements, methods of testing and required test results (IEC 80/883/CD:2018); Text in English
  • DIN 10809:1988-08 Analysis of tea; preparation of liquor for use in sensory tests
  • DIN 8076:2013 Pressure pipelines made from thermoplastics materials - Metal and plastics compression fittings for polyethylene (PE) pipes - General quality requirements and testing; Text in German and English
  • DIN EN ISO 11890-1:2023-09 Paints and varnishes - Determination of volatile organic compounds (VOC) and/or semi-volatile organic compounds (SVOC) content - Part 1: Gravimetric method for VOC determination (ISO/DIS 11890-1:2023); German and English version prEN ISO 11890-1:2023 /...
  • DIN EN 60444-8:2017-11 Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units (IEC 60444-8:2016); German version EN 60444-8:2017 / Note: DIN EN 60444-8 (2004-03) remains valid alongside this standard until 2020-01-19.
  • DIN EN 15876-1:2022 Electronic fee collection - Conformity evaluation of on-board and roadside equipment to EN 15509 - Part 1: Test suite structure and test purposes; English version prEN 15876-1:2022
  • DIN EN 15882-3:2009 Extended applications of results from fire resistance tests for service installations - Part 3: Penetration seals; English version of DIN EN 15882-3:2009-07
  • DIN EN 2591-402:2012 Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock; German and English version EN 2591-402:2012
  • DIN EN 4828:2021 Aerospace series - Thermal drift of LED luminaires - Classification and measuring methods; English version prEN 4828:2021
  • DIN EN 2591-307:2012 Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist; German and English version EN 2591-307:2012
  • DIN EN 3475-407:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability; German and English version EN 3475-407:2009
  • DIN EN 3475-509:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability; German and English version EN 3475-509:2002
  • DIN EN 3475-512:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance; German and English version EN 3475-512:2002
  • DIN EN 12350-11:2010-12 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test; German version EN 12350-11:2010
  • DIN EN 933-11:2009 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate; English version of DIN EN 933-11:2009-07
  • DIN EN ISO 3262-14:2022-10 Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO/DIS 3262-14:2022); German and English version prEN ISO 3262-14:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-14 (2000-08).
  • DIN EN 16602-70-15:2018 Space product assurance - Non-destructive testing or non-destructive inspection; English version prEN 16602-70-15:2018
  • DIN EN 13755 Corrigendum 1:2004 Natural stone test methods - Determination of water absorption at atmospheric pressure Corrigendum 1 to English version of DIN EN 13755:2002-03
  • DIN EN 6059-501:2011 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test; German and English version EN 6059-501:2010
  • DIN EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/high temperature bend test; German and English version EN 3745-405:2012
  • DIN EN 3475-605:2011 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605: Wet short circuit test; German and English version EN 3475-605:2010
  • DIN EN 60444-8:2004 Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units (IEC 60444-8:2003); German version EN 60444-8:2003
  • DIN 10967-4:2002 Sensory analysis - Investigation of profiles - Part 4: Testing plans
  • DIN EN ISO 11073-10420:2013 Health informatics - Personal health device communication - Part 10420: Device specialization - Body composition analyzer (ISO 11073-10420:2012); English version EN ISO 11073-10420:2012
  • DIN EN ISO 10993-1:2009 Biological evaluation of medical devices - Part 1: Evaluation and testing (ISO 10993-1:2003); German version EN ISO 10993-1:2009
  • DIN EN 12644-1:2009 Cranes - Information for use and testing - Part 1: Instructions (includes Amendment A1:2008); English version of DIN EN 12644-1:2009-06
  • DIN EN 3745-301:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation; German and English version EN 3745-301:2012
  • DIN EN 3745-701:2002 Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 701: Strippability; German and English version EN 3745-701:2002
  • DIN EN 3475-515:2010 Aerospace series - Cable, electrical, aircraft use - Test methods - Part 515: Crush resistance; German and English version EN 3475-515:2009
  • DIN EN 3475-807:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance; German and English version EN 3475-807:2002
  • DIN EN 3475-805:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance; German and English version EN 3475-805:2002
  • DIN EN 3475-804:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 804: Velocity of propagation; German and English version EN 3475-804:2002

ISUZU - Isuzu Motors Ltd., analysis test english

  • ISC-C74-203A-1996 Test Diesel Fuel (ADR) (Japanese/English Version)
  • ISC-F20-026A-2011 Acid Rain Resistance Test Procedure (Japanese/English Version)
  • INDEX VOLUME 1-2003 Material and Test Methods - Metals (Japanese/English Version)
  • INDEX VOLUME 3-2007 MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
  • ISC-E00-007-1979 Physical Testing Methods for Vulcanized Rubber (Japanese/English Version)
  • ISC-F22-020A-2017 Test procedures for basic performance of plastic parts (Japanese/English Version)
  • INDEX-2000 Total Index of Material Specifications and Test Methods (Japanese/English Version)
  • INDEX VOLUME 1-2000 Material Specifications and Test Methods - Volume 1 Metals (Japanese/English Version)
  • INDEX VOLUME 1-2001 Material Specifications and Test Methods - Volume 1 Metals (Japanese/English Version)
  • INDEX VOLUME 6-2003 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
  • INDEX VOLUME 2-2000 Material Specifications and Test Methods - Volume 2 Adhesives@ Sealers (Japanese/English Version)
  • INDEX VOLUME 6-2002 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
  • INDEX VOLUME 3-2002 Material Specifications and Test Methods - Volume 3 Coatings (Japanese/English Version)
  • INDEX VOLUME 5-2001 Material Specifications and Test Methods - Plastics and Rubbers (Japanese/English Version)
  • INDEX VOLUME 2-2002 Material Specifications and Test Methods - Volume 2 Adhesives@ Sealers (Japanese/English Version)
  • INDEX VOLUME 1-2002 Material Specifications and Test Methods - Volume 1 Metals (Japanese/English Version)
  • INDEX VOLUME 6-2004 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
  • INDEX VOLUME 6-2000 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
  • INDEX VOLUME 2-2005 Material Specifications and Test Methods - Volume 2 Adhesive@ Sealer (Japanese/English Version)
  • INDEX VOLUME 1-2008 Material Specifications and Test Methods - Volume 1 Metals (Japanese/English Version)
  • INDEX VOLUME 3-2000 Material Specifications and Test Methods - Volume 3 Coatings (Japanese/English Version)
  • INDEX VOLUME 2-2001 Material Specifications and Test Methods - Volume 2 Adhesives@ Sealers (Japanese/English Version)
  • INDEX VOLUME 6-2001 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
  • INDEX VOLUME 3-2001 Material Specifications and Test Methods - Volume 3 Coatings (Japanese/English Version)
  • INDEX VOLUME 2-2003 Material Specifications and Test Methods - Volume 2 Adhesives@ Sealers (Japanese/English Version)
  • INDEX VOLUME 5-2000 Material Specifications and Test Methods - Volume 5 Plastics@ Rubber (Japanese/English Version)
  • ISC-F20-021A-2011 Tack-free Time of Adhesive and Sealing Material Test Procedure (Japanese/English Version)
  • INDEX VOLUME 5-2003 Material Specifications and Test Methods - Volume 5 Plastics and Rubber (Japanese/English Version)
  • INDEX VOLUME 5-2004 Material Specifications and Test Methods - Volume 5 Plastics and Rubbers (Japanese/English Version)
  • INDEX VOLUME 5-2002 Material Specifications and Test Methods - Volume 5 Plastics and Rubber (Japanese/English Version)
  • INDEX VOLUME 6-2005 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 6-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 6-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 6-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 6-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 6-2014 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 6-2007 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 6-2011 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 6-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 3-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 3-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 3-2012 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 3-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 3-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 3-2004 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 3-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 3-2003 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 3-2005 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 3-2014 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 4-2004 Material Specifications and Test Methods - Volume 4 Fuels@ Lubes@ and Coolants (Japenese/English Version)
  • INDEX VOLUME 4-2003 Material Specifications and Test Methods - Volume 4 Fuels@ Lubes@ and Coolants (Japenese/English Version)
  • INDEX VOLUME 5-2011 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 5-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 5-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 5-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 5-2005 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 5-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 5-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 2-2004 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 2-2011 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 2-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 2-2007 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 2-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 2-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 4-2007 ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japenese/English Version)
  • INDEX VOLUME 4-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS-Fuels/Lubricants & Coolant BILINGUL (Japanese/English Version)
  • INDEX VOLUME 4-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 4-2011 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 4-2014 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 4-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)
  • INDEX VOLUME 4-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS-Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)

Professional Standard - Agriculture, analysis test english

  • ISPM No.2(2007) Pest Risk Analysis Framework (English)
  • ISPM No.11(2004) Pest Risk Analysis for Quarantine Pests, including Environmental Risk and LMO Analysis (in English)
  • GB/T 462-2023 Determination of moisture content of analytical samples of paper, paperboard and pulp

GM Daewoo, analysis test english

AT-OVE/ON, analysis test english

  • OVE EN IEC 60598-1/AA:2021 Luminaires - Part 1: General requirements and tests (Amendment) (english version)
  • OVE EN IEC 62855:2021 Nuclear power plants - Electrical power systems - Electrical power systems analysis (IEC 45A/1094/FDIS) (english version)
  • OVE EN IEC 60851-1:2020 Winding wires - Test methods - Part 1: General (IEC 55/1875/CDV) (english version)
  • OVE EN 60763-2/A1-2021 Specification for laminated pressboard - Part 2: Methods of test (IEC 15/943/CDV) (Amendment) (english version)
  • OVE EN 50342-1/A2-2021 Lead-acid starter batteries - Part 1: General requirements and methods of test (Amendment) (english version)
  • OVE EN 50642/A1-2021 Cable management systems - Test method for content of halogens (english version) (Amendment)
  • OVE EN IEC 61300-2-5:2021 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion (IEC 86B/4503/CDV) (english version)
  • OVE EN IEC 61169-1-6:2021 Radio frequency connectors - Part 1-6: Electrical test methods- RF power (IEC 46F/563/CDV) (english version)
  • OVE EN IEC 63355:2021 Cable management systems - Test method for content of halogens (IEC 23A/974/CDV) (english version)
  • OVE EN IEC 60512-99-002:2021 Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (IEC 48B/2881/CDV) (english version)
  • OVE EN IEC 60794-1-402:2020 Optical Fibre Cables - Basic optical cable test procedures - Part 402: Electrical test methods - Lightning test (for OPGW, OPPC and OPAC), Method H2 (IEC 86A/2045/CDV) (english version)
  • OVE EN IEC 60794-1-401:2020 Optical fibre cables - Basic optical cable test procedures - Part 401: Electrical test methods - Short-circuit test (for OPGW, OPPC and OPAC), Method H1 (IEC 86A/2044/CDV) (english version)
  • OVE EN IEC 60794-1-404:2021 Optical fibre cables - Part 1-404: Generic specification - Basic optical cable test procedures - Electrical test methods - Current-temperature test, Method H4 (IEC 86A/2100/CDV) (english version)
  • OVE EN IEC 60444-6:2021 Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD) (IEC 49/1354/CDV) (english version)
  • OVE EN IEC 61169-1-5:2021 Radio frequency connectors - Part 1-5: Electrical test methods - Rise time degradation (IEC 46F/562/CDV) (english version)
  • OVE EN IEC 61400-50:2021 Wind energy generation systems - Part 50: Wind measurements (IEC 88/827/CDV) (english version)
  • OVE EN IEC 60794-1-219:2020 Optical fibre cables - Part 1-219: Generic specification - Basic optical cable test procedures - Material compatibility test, Method F19 (IEC 86A/2043/CDV) (english version)
  • OVE EN IEC 62093:2021 Power conversion equipment for photovoltaic systems - Design qualification testing (IEC 82/1845/CDV) (english version)
  • OVE EN IEC 60749-37:2020 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 47/2651/CDV) (english version)
  • OVE EN IEC 61300-1:2021 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance (IEC 86B/4470/CDV) (english version)
  • OVE EN IEC 62150-6:2021 Fibre optic active components and devices - Basic test and measurement procedures - Part 6: Universal mezzanine boards for test and measurement of photonic devices (IEC 86C/1721/CDV) (english version)
  • OVE EN IEC 61300-2-43:2021 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single-mode PC optical fibre connectors (IEC 86B/4495/CDV) (english version)
  • OVE EN IEC 60599:2021 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis (IEC 10/1133/CDV) (english version)
  • OVE EN IEC 61300-3-4:2021 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation (IEC 86B/4496/CDV) (english version)
  • OVE EN 50632-1/A2-2021 Electric motor-operated tools - Dust measurement procedure - Part 1: General requirements (Amendment) (english version)
  • OVE EN 50463-4/A1-2021 Railway applications - Energy measurement on board trains - Part 4: Communication (Amendment) (english version)
  • OVE EN IEC 60749-10:2021 Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - device and subassembly (IEC 47/2692/CDV) (english version)

GM Global, analysis test english

  • GMW 16982-2013 Cold Slam Test Issue 1; English [Replaced: GMNA GM9773P, GMNA GM9773P]
  • GMW 3191-2012 Connector Test and Validation Specification Issue 2; English [Replaced: GME QT 126595, GME QT 126595]
  • GMW 16926-2013 Molding and Emblem Adhesion Test Pluck Resistance Issue 1; English [Replaced: GMNA GM9774P, GMNA GM9774P]
  • GMW 16966-2013 Procedure for Crowbar Testing Structurally Bonded Plastic Assemblies Issue 1; English [Replaced: GMNA GM9647P, GMNA GM9647P]

PL-PKN, analysis test english

Group Standards of the People's Republic of China, analysis test english

British Standards Institution (BSI), analysis test english

  • BS 6376-1:1983 Reagents for chemical analysis. Methods of test
  • BS 1016-104.1:1999 Methods for analysis and testing of coal and coke - Proximate analysis - Determination of moisture content of the general analysis test sample - Determination of ash
  • BS 1000[52]:1977 Universal Decimal Classification - English full edition - Astronomy - Astrophysics - Space research - Geodesy
  • BS ISO 17858:2007 Water quality - Determination of dioxin-like polychlorinated Biphenyls - Method using gas-chromatography/mass spectrometry
  • BS EN ISO 5495:2005+A1:2016 Sensory analysis. Methodology. Paired comparison test
  • 18/30374725 DC BS EN 16215. Animal feeding stuffs: Methods of sampling and analysis. Determination of dioxins and dioxin-like PCBs by GC/HRMS and of indicator PCBs by GC/HRMS
  • BS EN 1744-1:1998 Tests for chemical properties of aggregates - Chemical analysis
  • BS 1000[620]:1990 Universal Decimal Classification - English full edition - Materials testing - Commercial materials - Power stations - Economics of energy

CZ-CSN, analysis test english

国家市场监督管理总局、中国国家标准化管理委员会, analysis test english

  • GB/T 5832.4-2020 Gas analysis—Determination of moisture—Part 4: The method of quartz crystal oscillation
  • GB/T 38634.3-2020 Systems and software engineering—Software testing—Part 3: Test documentation

Professional Standard - Water Conservancy, analysis test english

  • SL/Z 572-2014 Technical guidelines on hydrological monitoring and evaluation in urban areas

水利部, analysis test english

  • SL/T 572-2014 Technical Guidelines for Urban Hydrological Monitoring, Analysis and Evaluation

RO-ASRO, analysis test english

American Society for Testing and Materials (ASTM), analysis test english

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, analysis test english

  • GB/T 11462-1989 Test methods of spectrum analyzers
  • GB/T 741-2003 Pulps--Determination of moisture content
  • GB/T 25494-2010 Test methods for composition analysis of getters
  • GB/T 462-2008 Paper,board and pulp.Determination of moisture content of analytical sample
  • GB/T 6730.3-1986 Methods for chemical analysis of iron ores--The gravimetric method for the determination of hygroscopic moisture content in analytical samples

U.S. Air Force, analysis test english

RU-GOST R, analysis test english

  • GOST R 51148-1998 Medical devices. Requirements for samples and documentation presented for toxicological tests, sanitary and chemical analyses, tests for sterility and pyrogenicity
  • GOST R ISO 8588-2008 Sensory analysis. Methodology. "A" "not A" test
  • GOST R ISO 8589-2005 Sensory analysis. Guidance for the design of test rooms
  • GOST 9516-1992 Coal. Determination of moisture in the analysis sample. Direct gravimetric method
  • GOST R 56922-2016 Software and systems engineering.Software testing. Part 3. Test documentation

未注明发布机构, analysis test english

  • DIN/TS 10068:2022 Food - Determination of microplastics - Analytical methods; Text in English
  • BS 1016-6:1977(1999) Methods for Analysis and testing of coal and coke — Part 6 : Ultimate analysis of coal
  • BS 1016-14:1963(1999) Methods for The analysis and testing of coal and coke — Part 14 : Analysis of coal ash and coke ash
  • BS EN ISO 5495:2007+A1:2016 Sensory analysis — Methodology — Paired comparison test
  • DIN EN ISO 11136:2017 Sensory analysis – Methodology – General guidance for conducting hedonic tests (consumer tests) in a controlled environment (ISO 11136:2014); German version EN ISO 11136:2017
  • BS EN ISO 3262-14:2023 Extenders — Specifications and methods of test Part 14 : Cristobalite
  • DIN EN 62056-53 Berichtigung 1:2003 Electrical energy measurement – Meter reading transmission, tariff and load control – Part 53: COSEM application layer (IEC 62056-53:2002); German version EN 62056-53:2002, text in English
  • DIN EN 196-2:1995 Methods of testing cement — Part 2: Chemical analysis of cement

Standard Association of Australia (SAA), analysis test english

NZ-SNZ, analysis test english

  • NZS 4402.3.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 3: Soil Chemical Tests Test 3.4: Detection of Presence of Allophane in Soils

Association Francaise de Normalisation, analysis test english

  • NF EN 16215:2020 Aliments des animaux : méthodes d'échantillonnage et d'analyse - Dosage des dioxines, des PCB de type dioxine et des PCB indicateurs par GC/HRMS
  • NF X43-324-4*NF EN 1948-4+A1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
  • NF EN 1948-4+A1:2014 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 4 : prélèvement et analyse des PCB de type dioxine
  • NF EN 1948-4/IN1:2014 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 4 : prélèvement et analyse des PCB de type dioxine
  • NF V09-013*NF EN ISO 4120:2021 Sensory analysis - Methodology - Triangle test
  • NF EN ISO 4120:2021 Analyse sensorielle - Méthodologie - Essai triangulaire
  • NF ISO 8588:2017 Analyse sensorielle - Méthodologie - Essai "A" - "non A"
  • NF V09-020*NF EN ISO 10399:2018 Sensory analysis - Methodology - Duo-trio test
  • NF EN ISO 10399:2018 Analyse sensorielle - Méthodologie - Essai duo-trio
  • NF EN 60444-8:2017 Mesure des paramètres des résonateurs à quartz - Partie 8 : dispositif d'essai pour les résonateurs à quartz montés en surface
  • NF EN ISO 5495/A1:2016 Analyse sensorielle - Méthodologie - Essai de comparaison par paires
  • NF EN ISO 5495:2007 Analyse sensorielle - Méthodologie - Essai de comparaison par paires
  • NF P85-701:2022 Produits pour joints - Essais d'identification - Analyse thermogravimétrique
  • NF C93-621-8*NF EN 60444-8:2017 Measurement of quartz crystal unit parameters - Part 8 : Test fixture for surface mounted quartz crystal units
  • NF A20-405:1985 Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric and Karl Fischer methods.

Indonesia Standards, analysis test english

  • SNI 15-1320-1989 Gypsum, Chemical analysis test method
  • SNI 06-3605-1994 Water analysis, Test methods of mercury by mercury analyzers
  • SNI 01-3475-1994 Coal, Preparation of sample for analysis and testing in laboratories and determination of free moisture content

VE-FONDONORMA, analysis test english

SE-SIS, analysis test english

Society of Automotive Engineers (SAE), analysis test english

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., analysis test english

ES-UNE, analysis test english

  • UNE-EN ISO 4120:2022 Sensory analysis - Methodology - Triangle test (ISO 4120:2021)
  • UNE-EN 16215:2020 Animal feeding stuffs: Methods of sampling and analysis - Determination of dioxins and dioxin-like PCBs and of indicator PCBs by GC/HRMS
  • UNE-EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 and ISO 5495:2005/Cor 1:2006) (Endorsed by Asociación Española de Normalización in February of 2018.)
  • UNE-EN ISO 10399:2018 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
  • UNE-EN ISO 5495:2007/A1:2016 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005/Amd 1:2016) (Endorsed by Asociación Española de Normalización in September of 2017.)
  • UNE-EN 60444-8:2017 Measurement of quartz crystal unit parameters - Part 8 : Test fixture for surface mounted quartz crystal units (Endorsed by Asociación Española de Normalización in May of 2017.)

Danish Standards Foundation, analysis test english

  • DS/EN 1948-4:2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
  • DS/EN ISO 4120:2007 Sensory analysis - Methodology - Triangle test
  • DS/EN ISO 10399:2010 Sensory analysis - Methodology - Duo-trio test
  • DS/EN 60444-8:2003 Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units
  • DS/ISO/IEC/IEEE 29119-3:2013 Software and systems engineering - Software testing - Part 3: Test documentation

Lithuanian Standards Office , analysis test english

  • LST EN 1948-4-2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs

AENOR, analysis test english

  • UNE-EN 1948-4:2011+A1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
  • UNE 87016:1986 SENSORY ANALYSIS. METHODOLOGY "A" "NOT A" TEST
  • UNE 32203:2012 Coke. Determination of moisture in the general analysis test sample
  • UNE 80220:2012 Cement test methods. Chemical analysis. Moisture determination.
  • UNE 30004:1957 CHEMICAL PRODUCTS. ANALYSIS REAGENTS. DETERMINATION OF ARSENIC.
  • UNE 30003:1956 CHEMICAL PRODUCTS. ANALYSIS REAGENTS. SPECIMENS FOR COMPARISON TESTS.

Korean Agency for Technology and Standards (KATS), analysis test english

AGMA - American Gear Manufacturers Association, analysis test english

  • 93FTM8-1993 Single Flank Testing and Structure-Born Noise Analysis

IT-UNI, analysis test english

IN-BIS, analysis test english

European Committee for Standardization (CEN), analysis test english

  • EN 16215:2020 Animal feeding stuffs: Methods of sampling and analysis - Determination of dioxins and dioxin-like PCBs and of indicator PCBs by GC/HRMS

International Organization for Standardization (ISO), analysis test english

  • ISO 687:1974 Coke; Determination of moisture in the analysis sample
  • ISO 3262-14:2023 Extenders — Specifications and methods of test — Part 14: Cristobalite
  • ISO 331:1983 Coal; determination of moisture in the analysis sample; direct gravimetric method
  • ISO/DIS 687:2023 Coke — Determination of moisture in the general analysis test sample
  • ISO/IEC/IEEE 29119-3:2013 Software and systems engineering.Software testing.Part 3: Test documentation
  • ISO/IEC/IEEE 29119-3:2021 Software and systems engineering — Software testing — Part 3: Test documentation

YU-JUS, analysis test english

  • JUS B.G8.132-1977 Metho?s of chemical analysis of iron ores. Determination ofhygroskopic moisture in analytical samples
  • JUS B.H8.339-1987 Methods of analysis of coal and coke. Coke-determination of moisture in the analysis sample
  • JUS B.H8.310-1984 Methods of ana/ysis of coal and coke. Determination of moisture in the analysis sample of coal by the direct volumetric method

American National Standards Institute (ANSI), analysis test english

  • BS EN ISO 18134-3:2023 Solid biofuels. Determination of moisture content Moisture in general analysis sample (British Standard)
  • ANSI/IEEE 101:1995 Guide for the Statistical Analysis of Thermal Life Test Data

Professional Standard - Commodity Inspection, analysis test english

  • SN/T 1083.1-2002 Methods of quick determination of moisture in the analysis sample and ash in coke

CN-STDBOOK, analysis test english

  • 图书 3-9090 Review of Analytical Testing Instruments--Viewing the Progress of Analytical Technology from BCEIA2017 Instrument Exhibition

Japanese Industrial Standards Committee (JISC), analysis test english

  • JIS P 8002:1996 Pulpwood -- Determination of moisture content for analysis
  • JIS M 8810:1994 Coal and coke -- General rules for sampling, analysis and testing
  • JIS M 8511:2014 Methods for industrial analysis and testing of natural graphite
  • JIS K 7120:1987 Testing methods of plastics by thermogravimetry
  • JIS L 1030-2:1998 Testing methods for quantitative analysis of fibre mixtures of textiles -- Part 2: Testing methods for quantitative analysis of fibre mixtures

ES-AENOR, analysis test english

WRC - Welding Research Council, analysis test english

US-FCR, analysis test english

Shaanxi Provincial Standard of the People's Republic of China, analysis test english

ZA-SANS, analysis test english

  • SANS 6292:2006 Lime tests - Chemical analysis - Sample preparation and reagents

Professional Standard - Electricity, analysis test english

Professional Standard - Electron, analysis test english

The American Road & Transportation Builders Association, analysis test english

AASHTO - American Association of State Highway and Transportation Officials, analysis test english

  • T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
  • T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
  • T 88-2000 Standard Method of Test Particle Size Analysis of Soils
  • T88-1993 Standard Method of Test for Particle Size Analysis of Soils

Hunan Provincial Standard of the People's Republic of China, analysis test english

KR-KS, analysis test english

European Committee for Electrotechnical Standardization(CENELEC), analysis test english

  • EN 60444-8:2017 Measurement of quartz crystal unit parameters - Part 8 : Test fixture for surface mounted quartz crystal units

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., analysis test english

  • IEEE 29119-3-2013 Software and systems engineering - Software testing - Part 3: Test documentation




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved