ZH
RU
ES
Plastic jar size
Plastic jar size, Total:500 items.
In the international standard classification, Plastic jar size involves: Sports equipment and facilities, Plastics, Electronic components in general, Pipeline components and pipelines, Cans. Tins. Tubes, Bottles. Pots. Jars, Rubber and plastics products, Elements of buildings, Aerosol containers, Valves, Commercial vehicles, Equipment for the rubber and plastics industries, Headgear. Clothing accessories. Fastening of clothing, Analytical chemistry, Cases. Boxes. Crates, Chipless working equipment, Equipment for petroleum and natural gas industries, Bearings, Cellular materials, Wastes, Cutting tools, Installations in buildings, Furniture, Pharmaceutics, Powder metallurgy, Woodworking equipment, Equipment for the metallurgical industry, Office machines, Linear and angular measurements, Miscellaneous domestic and commercial equipment, Electrical accessories, Radiation measurements, Fluid storage devices, Agricultural machines, implements and equipment, Protection against dangerous goods, Galvanic cells and batteries, Barrels. Drums. Canisters, Materials for the reinforcement of composites, Construction materials, Special purpose vehicles, Aircraft and space vehicles in general, Packaging and distribution of goods in general, Aerospace fluid systems and components, Technical drawings, Freight distribution of goods, Insulating fluids, Road vehicle systems, Reinforced plastics, Fasteners, Electrical engineering in general, Equipment for the chemical industry, Photography, Petroleum, petroleum products and natural gas handling equipment, Textile machinery.
RO-ASRO, Plastic jar size
- STAS 11962-1985 Plastic packings TANKS "WITH CIRCULAR SECTION Dimensions
- STAS 2430/2-1980 COPPER-ZINC ALLOY PLATES Dimensions
- STAS 8019-1980 Liquid fuel tanks CYLINDRICAL TANK WITH HORIZONTAL AXIS Main dimensions
- STAS 10709-1982 PLASTIC FLEXIBLE CORRUGATED TUBES Shapes and dimensions
- SR 3880-2-1995 Petroleum equipment. Tanks. Shapes and dimensions
- STAS 11260-1980 Shipbuilding details AIR CASINGS FOR WATER, FUEL AND OIL TANKS Dimensions
- STAS 9664-1974 PLASTICS Determination of change in linear dimensions of non-rigid thermoplaslics films
- STAS 9895-1976 Self locking nuts HEXAGONAL NUT WITH PLASTICS RING Uimensions
- STAS 9895-1980 Self locking nuts HEXAGONAL NUT WITH PLASTICS RING Dimensions
- STAS 9851-1980 Self-locking nuts HEXAGONAL NUT WITH PLASTIC RING Dimensions
- STAS 5520-1982 Equipments for chcmical industry PEDESTALS FOR TANKS Shapes and dimcnsions
- STAS 7244-1988 Mining cquipment DRAWING CAGES FOR MINING CARS WITH CAPACITY UP TO 1 iu3 jMain dimcnsions
- STAS 12498-1986 class packings JARS FOR STERILIZED PRESERVES shapes and dimensions
- STAS 5455-1982 Equipments for chemical industry SIDE SUPPORTS FOR TANKS Shapes and dimensions
- STAS 1687/3-1982 META1XIC LIDS FOR CYLINDRI- CAL CANS FOR TINS Dimensions
- STAS 1687/4-1982 Mctallic Packages GHEKING GAUGES FOH CYLINDRICAL TINS Dimensions
- STAS 7958-1981 Equipment for chemical industry HOOPERED BOTTOMS AT 90° FOR TANKS Dimensions
- STAS 7957-1981 Equipment for chemical industry HOOPERED BOTTOMS AT 60° FOR TANKS Dimensions
- STAS 8941-1987 METALLIC TANKS AT ATMOSPHERIC PRESSURE FOR INSTALLATIONS Shapes and dimensions
- STAS 9051/1-1974 FABRICS COATED WITH RUBBER OR PLASTICS Determination of dimensions and mass
- SR 7110-1994 Undercarriages or railway-cars with standard gauge.Mounted axles.Dimensions
CZ-CSN, Plastic jar size
Indonesia Standards, Plastic jar size
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Plastic jar size
- GB/T 14486-2008 Dimensional tolerances for moulded plastic parts
- GB/T 14486-1993 Dimensional tolerances for plastic engineering moulded plastic pats
- GB/T 12003-1989 Allowable tolerances for basic dimensions of plastic windows
- GB/T 8806-2008 Plastics piping systems.Plastics components.Determination of dimensions
- GB/T 8806-1988 Method for dimension measuring of plastic pipes
- GB/T 12027-1989 Test method for dimensional stability of plastic films
- GB/T 6342-1996 Cellular plastics and rubbers--Determination of linear dimensions
- GB/T 12003-2008 Unplasticized polyvinyl chloride(PVC-U) windows.Determination of dimensions
- GB/T 8811-2008 Rigid cellular plastics.Test method for dimensionsl stability
- GB/T 8811-1988 Test method for dimensional stability of rigid cellular plastics
- GB/T 12811-1991 Test method for average cell size of rigid cellular plastics
- GB/T 41709-2022 Carbon-fibre-reinforced plastics—Determination of the size and aspect ratio of crushed objects
- GB/T 25197-2010 Welded static non-pressurized thermoplastic tanks
- GB/T 9573-2003 Rubber and plastics hose and hose assemblies-Methods of measurement of dimensions
- GB/T 12027-2004 Plastics-Film and sheeting-Determination of dimensional change on heating
- GB/T 38533-2020 Injection moulding machines for rubber and plastics—Mould fixing and connection dimensions
- GB/T 14664-1993 Dimensional tolerances stipulation of plastic packaging mould
PL-PKN, Plastic jar size
- PN M68009-1974 Injection moulding machines for plastics Dimensions of tool holders
- PN B75704-02-1990 Toilet seats of thermoplastics Toilet seats for standard water closet Dimensions
- PN B75704-03-1988 Toilet seats of thermoplastics Toilet seats for compact water closet Dimensions
- PN B75704-04-1988 Toilet seats of thermoplastics Toilet seats for children's water closet Dimensions
- PN M68009-1991 Machines for processing of plastic materials. Interchangeability dimensions
- PN C89083-1992 Cellular plastics, rigid. Test for dimensional stability
- PN C89427-1992 Cellular plastics and rubbers. Determination of linear dimensions
- PN P63508-1987 Textile machinery Sliver cans Division, designation and dimension
- PN-EN 15007-2017-05 P Aerosol containers -- Tinplate containers -- Dimensions of two and three-piece cans
German Institute for Standardization, Plastic jar size
- DIN 16986:1987 Thermoplastics flat bars; dimensions
- DIN EN ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005); German version EN ISO 3126:2005
- DIN 3543-3:1978 PVC tapping valves for plastic pipes; dimensions
- DIN 75013:2015 Tank trucks - Grounding plate - Dimensions
- DIN 75013:1979 Tank trucks; grounding plate, dimensions
- DIN 75013:2015-12 Tank trucks - Grounding plate - Dimensions
- DIN EN ISO 3126:2005-05 Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005); German version EN ISO 3126:2005
- DIN 3418:1998 Plastic slide fasteners - Design types, dimensions, materials
- DIN 28459:1987-11 Flanges for tank trucks; mounting dimensions
- DIN 75012:1986 Road tankers; dipstick assembly; mating dimensions
- DIN 75012:2015 Road tankers - Dipstick assembly - Mating dimensions
- DIN 75012:2015-10 Road tankers - Dipstick assembly - Mating dimensions
- DIN 53733:2021-04 Testing of plastics - Size reduction of plastic products for test purposes
- DIN EN ISO 16012:2016-02 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015); German version EN ISO 16012:2015
- DIN EN ISO 11963:2019-12 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2019); German version EN ISO 11963:2019
- DIN 75014:1991 Dome cover for tank trucks, cylindrical; dimensions
- DIN 28459:1987 Flanges for tank trucks; mounting dimensions
- DIN 47628-1:1983 Thermoplastic-clamping sleeves for telecommunication cables; dimensions
- DIN 53377:2021 Testing of plastic films - Determination of dimensional stability
- DIN 53377:2007 Testing of plastic films - Determination of dimensional stability
- DIN 53377:2015 Testing of plastic films - Determination of dimensional stability
- DIN 53377:1969 Testing of Plastic Films; Determination of Dimensional Stability
- DIN EN 13045:2022 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- DIN 53377:2021-11 Testing of plastic films - Determination of dimensional stability
- DIN EN 13045:2022-10 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; German version EN 13045:2022
- DIN 6103:2002 Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube; Dimensions, materials
- DIN EN 15007:2017-06 Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans; German version EN 15007:2017
- DIN EN ISO 11501:2004 Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995); German version EN ISO 11501:2004
- DIN EN ISO 11501:2004-10 Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995); German version EN ISO 11501:2004
- DIN 7868-3:1986-06 Rubber and plastics covered rollers; dimensional and geometrical tolerances
- DIN 16941:2012-11 Thermoplastics extruded profiles - General tolerances of size, form and orientation
- DIN 70014-1:1977 Vehicles for Transportation of Swop Bodies; Connecting Dimensions
- DIN 16901:1982 Plastics mouldings; Tolerances and acceptance conditions for linear dimensions
- DIN EN ISO 11963:2019 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2019)
- DIN EN ISO 1923:1995-06 Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981); German version EN ISO 1923:1995
- DIN EN 13974:2003-01 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume; German version EN 13974:2002
- DIN 44807:1979 Dimensions of test tubes made of glass and plastics for radioactivity measurements
- DIN 16941:1986 Thermoplastics extruded profiles; general tolerances of size, form and orientation
- DIN 13014:1977 Polyether foam hospital mattresses; dimensions, requirements, testing
- DIN 6103:2009 Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube, dimensions, materials
- DIN 16941:2012 Thermoplastics extruded profiles - General tolerances of size, form and orientation
- DIN 16456-2:2017-10 Plastic sheet piling - Extruded sheet piling of plasticizerfree polyvinylchloride (PVC-U) - Part 2: Dimensions
HU-MSZT, Plastic jar size
YU-JUS, Plastic jar size
- JUS G.S3.502-1979 Plastics pipes - Measurement of dimensions
- JUS G.C6.601-1985 Plastics. Polyethylene pipes. Dimensions and tolerances
- JUS G.C6.601-1982 Plastics. Polyethylene pipes. Dimensions and tolerances
- JUS G.C6.701-1984 Plastics. Polypropylene pipes. Dimensions and tolerances
- JUS G.C6.501-1984 Plastics. Unplasticized polyvinyl chloride pipes. Dimensions and tolerances
- JUS G.C6.601/1-1992 Plastics - Polyethylene pipes - Dimensions and tolerances - Amendments
- JUS G.S2.810-1990 Cellular plastics and rubbers. Determination of linear dimensions
- JUS M.Z2.027-1978 Hermetically sealed metal foo? cans. Round cansfor general use. Nominal diameters
- JUS M.Z2.045-1984 Round cyllndrical hermetically sealed metal food cant. Can ends and flanges. Shape and dlmensions
- JUS G.S3.101-1991 Rubber and plastics hoses and hose assemblies. Methods of measurement of dimensions
FI-SFS, Plastic jar size
Professional Standard - Electron, Plastic jar size
ZA-SANS, Plastic jar size
- SANS 3126:1974 Plastics pipes - Measurement of dimensions
- SANS 3126:2008 Plastics piping systems - Plastics components - Determination of dimensions
Korean Agency for Technology and Standards (KATS), Plastic jar size
- KS M ISO 3126:2003 Plastics piping system-Plastics piping components-Measurement and determination of dimensions
- KS M ISO 3126:2016 Plastics piping system－Plastics piping components－Measurement and determination of dimensions
- KS B 4077-1972(2011) Dimensions relating to Molds for Plastics Injection Molding Machines
- KS B 4077-1972 Dimensions relating to Molds for Plastics Injection Molding Machines
- KS M 3042-2014 General rules for method for determination of dimension of plastics parts
- KS M ISO 16012:2014 Plastics — Determination of linear dimensions of test specimens
- KS B 4077-1999 Dimensions relating to Molds for Plastics Injection Molding Machines
- KS M 3042-1982 General rules for method for determination of dimension of plastics parts
- KS B 4077-1981 Dimensions relating to Molds for Plastics Injection Molding Machines
- KS M 3042-2002 General rules for method for determination of dimension of plastics parts
- KS I 3242-2014 Recycled plastics cushion tank
- KS I 3242-2016 Recycled plastics cushion tank
- KS M ISO 3126-2016(2021) Plastics piping system－Plastics piping components－Measurement and determination of dimensions
- KS M ISO 2796:2010 Cellular plastics, rigid－Test for dimensional stability
- KS M ISO 16012-2014(2019) Plastics — Determination of linear dimensions of test specimens
- KS M ISO 2796-2010(2020) Cellular plastics, rigid－Test for dimensional stability
- KS M 3042-2002(2012) General rules for method for determination of dimension of plastics parts
- KS B 4078-1972 Dimensions related to molds for plastics compression molding machines and plastics transfer molding machines
- KS B 4078-1986 Dimensions related to molds for plastics compression molding machines and plastics transfer molding machines
- KS M ISO 1923:2010 Cellular plastics and rubbers-Determination of linear dimensions
- KS M ISO 1923-2010(2020) Cellular plastics and rubbers－Determination of linear dimensions
- KS G 2013-2009 Plastic rulers
- KS G 2013-1994 Plastic rulers
- KS G 2013-1984 Plastic rulers
- KS B 4077-2013 Dimensions relating to Molds for Plastics Injection Molding Machines
- KS M ISO 11963:2019 Plastics — Polycarbonate sheets — Type, dimensions and characteristics
- KS B 4078-2013 Dimensions related to molds for plastics compression molding machines and plastics transfer molding machines
- KS B 7928-2013 Dimensions of drainage plugs for pesticide tanks of speed sprayers
- KS B 7928-2006(2011) Dimensions of drainage plugs for pesticide tanks of speed sprayers
- KS M ISO 11501:2014 Plastics — Film and sheeting — Determination of dimensional change on heating
- KS W ISO 9634-2008(2018) Aerospace－Fluid systems－Dimensions of plastic protective caps and plugs
- KS M ISO 11501-2014(2019) Plastics — Film and sheeting — Determination of dimensional change on heating
- KS D ISO TR 11761:2004 Light－gauge metal containers－Round open－top cans－Classification of can sizes by construction type
- KS C 6316-1991 Pot-cores made of ferromagnetic oxide
- KS M ISO 4671:2013 Rubber and plastics hoses and hose assemblies－Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- KS M ISO 4671:2008 Rubber and plastics hoses and hose assemblies-Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- KS M ISO 6123-3:2018 Rubber-or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
- KS M ISO 6123-3:2008 Rubber- or plastics-covered rollers－Specifications－Part 3：Dimensional tolerances
- KS M ISO 11922-1:2022 Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
- KS W ISO 9634:2008 Aerospace－Fluid systems－Dimensions of plastic protective caps and plugs
RU-GOST R, Plastic jar size
- GOST 29325-1992 Plastics pipes. Measurement of dimensions
- GOST 33694-2015 Plastics. Determination of linear dimensions of test specimens
- GOST 26384-1984 Cylindric round tins for canned food. Sizes of constructive elements
- GOST 13479-1982 Board and combined cans. General specifications
- GOST R ISO 3126-2007 Plastics piping systems. Plastics components of piping systems. Determination of dimensions
- GOST 20325-1974 Disk type milling cutters for cutting thermoplasts sheets. Construction and dimensions
- GOST 20989-1975 Rigid cellular plastics. Method for determining dimension stability
- GOST R 55433-2013 Turnblades for machining wood materials and plastics. Tapes and dimensions
- GOST 20329-1974 Cutting off saws for cutting thermosetting plastics and thermoplasts. Specifications
- GOST 8200-1987 Hydraulic presses for plastic.Parameters and dimensions. Norms of accuracy
- GOST 20989-2017 Rigid cellular plastics. Method for determining of demension stability
- GOST 17387-1972 Guide bushings of plastics moulds and die casting dies. Construction and dimensions
- GOST 22559-1977 Shanks of press-moulds for pressure moulding of thermoset articles. Construction and dimensions
- GOST 13118-1983 Guide posts smooth for cold plastic working dies. Construction and dimensions
- GOST 17385-1972 Guide pins of plastic moulds and die casting dies. Construction and dimensions
- GOST 22752-1984 Industrial packing made of plastic. Types
- GOST 22065-1976 Plate-blanks of injection moulds. Design and dimensions
- GOST 25015-1981 Plastics celluar and foam rubber. Method for measuring linear dimensions
- GOST 23820-1979 Fluoroplastic sealing devices with corrugated springs for pistons. Fluoroplastic rings. Construction and dimensions
- GOST 5717.2-2003 Glass jars canned food. Basic parameters and dimensions
- GOST 10619-1980 Self-tapping countersunk screws for metals and plastics. Design and dimensions
- GOST 17386-1972 Step-shaped guide pins of plastics moulds and die casting dies. Construction and dimensions
- GOST 17389-1972 Step-shaped guide bushings of plastics moulds and die casting dies. Construction and dimensions
- GOST 22081-1976 Flange-blanks of injection moulds. Design and dimensions
- GOST ISO 11922-1-2006 Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Part 1. Metric series
- GOST 10621-1980 Self-tapping round-head screws for metals and plastics. Design and dimensions
- GOST 13119-1981 Die posta with flute for cold plastic working dies. Construction and dimensions
- GOST 13121-1983 Guide bushes with shoulders for cold plastic working dies. Construction and dimensions
- GOST 15947-1970 Smooth forming pieces for moulding plastic articles. Method of size calculation
- GOST 15948-1976 Thread-forming pieces for moulding metric thread in plastic articles. Size calculation
- GOST 20317-1974 Disk type milling cutters for cutting plastics textolite type. Construction and dimensions
- GOST 20318-1974 Disk type milling cutters for cutting plastics micarta type. Construction and dimensions
- GOST 22066-1976 Clamping plate-blanks of injection moulds. Design and dimensions
- GOST 22561-1977 Tips of composite shanks for press-moulds for pressure moulding of thermoset articles. Construction and dimensions
- GOST 23817-1979 Fluoroplastic sealing devices with corrugated springs for pistons. Construction and dimensions
- GOST 28294-1989 Plastic travellers for rings of spinning and twisting machines. Types and main dimensions
SE-SIS, Plastic jar size
International Organization for Standardization (ISO), Plastic jar size
- ISO 3126:1974 Plastics pipes; Measurement of dimensions
- ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions
- ISO 2796:1980 Cellular plastics — Test for dimensional stability of rigid materials
- ISO 2796:1974 Title missing - Legacy paper document
- ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens
- ISO 16012:2004 Plastics - Determination of linear dimensions of test specimens
- ISO 2796:1986 Cellular plastics, rigid; Test for dimensional stability
- ISO 1923:1972 Title missing - Legacy paper document
- ISO 1923:1981 Cellular plastics and rubbers; Determination of linear dimensions
- ISO 11963:2019 Plastics — Polycarbonate sheets — Types, dimensions and characteristics
- ISO 11963:1995 Plastics - Polycarbonate sheets - Types, dimensions and characteristics
- ISO 11501:1995 Plastics - Film and sheeting - Determination of dimensional change on heating
- ISO 11963:2012 Plastics - Polycarbonate sheets - Types, dimensions and characteristics
- ISO/TR 11761:1992 Light-gauge metal containers; round open-top cans; classification of can sizes by construction type
- ISO 4671:1999 Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions
- ISO 16012:2004/cor 1:2005 Plastics - Determination of linear dimensions of test specimens; Technical Corrigendum 1
- ISO 4671:1984 Rubber and plastics hose and hose assemblies; Methods of measurement of dimensions
- ISO 9634:1994 Aerospace - Fluid systems - Dimensions of plastic protective caps and plugs
- ISO 6123-3:1985 Rubber- or plastics-covered rollers; Specifications; Part 3 : Dimensional tolerances
American Gear Manufacturers Association, Plastic jar size
Association Francaise de Normalisation, Plastic jar size
- NF T54-002:1981 Plastics. Thermoplastics parts of piping. Definitions. Dimensions.
- NF T54-088*NF EN ISO 3126:2005 Plastics piping systems - Plastics components - Measurement of dimensions
- NF EN ISO 3126:2005 Systèmes de canalisations en plastiques - Composants en plastiques - Détermination des dimensions
- NF H44-044*NF EN 15007:2017 Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
- NF EN ISO 16012:2016 Plastiques - Détermination des dimensions linéaires des éprouvettes
- NF H44-044:2006 Metal aerosol containers - Tinplate containers - Dimensions of to and three-piece cans.
- NF T58-009*NF EN ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens
- NF H44-006*NF EN 15010:2007 Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch
- NF T54-040:1977 Matières plastiques - Raccords moulés en polychlorure de vinyle non plastifié - Caractéristiques dimensionnelles
- NF T54-101:1974 Plastic sheet. Presentation and dimensions. Methods of control.
- NF H35-037:1987 Industries de l'embouteillage - Bague à vis plastique type "pharmacie" - Dimensions.
- NF EN ISO 11963:2019 Plastiques - Plaques en polycarbonate - Types, dimensions et caractéristiques
- NF EN ISO 1923:1995 Plastiques et caoutchoucs alvéolaires - Détermination des dimensions linéaires.
- NF T54-105:1973 Plastics sheets. Determination of dimensional variations after heating. Kaolin bed method.
- NF R81-101:1980 Rigid cellular plastics. Determination of dimensional variations on immersion in fluids.
- NF H35-036:1984 Bottling industry. Plastic screw finish. Parfumery type. Dimensions.
- NF EN ISO 294-3:2020 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 3 : plaques de petites dimensions
- NF H33-006:1989 Metal containers. Hermetically metal cans for carbonated drinks. Designation and dimensional characteristics.
- NF M88-300:1981 Road tankers in reinforced plastic. Definition of materials suitable for the construction of vessel walls.
- NF T56-119*NF EN ISO 1923:1995 Cellular plastics and rubbers. Determination of linear dimensions.
- NF H34-051*NF EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- NF T54-402:1995 Plastics. Polycarbonate sheets. Types, dimensions and characteristics.
- NF T47-201:1993 Rubber and plastics hose assemblies. Methods of measurement of dimensions.
- NF EN 13045:2022 Emballage - Tubes cylindriques souples en matériau plastique - Dimensions et tolérances
- NF T54-028:1984 Plastics. Non plasticized PVC pipeline fittings. Glued connections. Dimensional characteristics.
- NF T54-105*NF EN ISO 11501:2004 Plastics - Film and sheeting - Determination of dimensional change on heating
- NF E55-092:1970 Office machines. Dimensions of a core for paper or plastic printing ribbons.
- NF T54-115:1973 Plastic sheets. Determination of dimensional variations after heating. Immersion method.
- NF EN 13974:2003 Conteneurs en plastique rigide - Spécifications des tolérances sur les dimensions, le poids et le volume
- NF M88-550:1979 Storage tanks in reinforced plastic. Underground tanks for liquid petroleum products.
- NF H35-204*NF EN 13974:2003 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume.
- NF T54-402:2013 Plastics - Polycarbonate sheets - Types, dimensions and characteristics
- NF T54-115:2020 Plastiques - Feuilles - Détermination des variations dimensionnelles après action de la chaleur - Méthode par immersion
- NF G40-002:1977 TEXTILE MACHINERY. SPINNING CANS AND ACCESSORIES. DIMENSIONAL SPECIFICATIONS.
European Committee for Standardization (CEN), Plastic jar size
- EN ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions ISO 3126:2005
- EN 15008:2006 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
- EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
- EN ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
- EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- EN 13045:2000 Packaging - Flexible Cylindrical Plastic Tubes - Dimensions and Tolerances
- EN 15008:2017 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25@4 mm aperture
- prEN 13045-2021 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- EN 13974:2002 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume
- EN 24671:1993 Rubber and Plastic Hose and Hose Assemblies - Methods of Measurement of Dimensions
- EN ISO 1923:1995 Cellular Plastics and Rubbers - Determination of Linear Dimensions (ISO 1923:1981)
- EN 1432:1997 Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions
- prEN 495-1-1991 Thermoplastic and elastomeric roofing and sealing sheets; determination of high temperature dimensional stability
- EN ISO 11963:2019 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2019)
- EN ISO 11501:2004 Plastics Film and sheeting Determination of dimensional change on heating
British Standards Institution (BSI), Plastic jar size
- BS EN ISO 3126:2006 Plastics piping systems - Plastics components - Determination of dimensions
- BS EN ISO 3126:2005 Plastics piping systems. Plastics components. Determination of dimensions
- BS EN 15008:2007 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
- BS EN ISO 16012:2015 Plastics. Determination of linear dimensions of test specimens
- BS EN 15008:2006 Aerosol containers - Aluminium containers - Dimensions of
one-piece cans with 25,4 mm aperture
- BS EN 15007:2007 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
- BS EN 15006:2007 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
- BS EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of
the 25,4 mm aperture
- BS EN 15007:2006 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
- BS EN ISO 11963:2019 Plastics. Polycarbonate sheets. Types, dimensions and characteristics
- BS EN ISO 1923:1995 Cellular plastics and rubbers - Determination of linear dimensions
- BS EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- BS 7010:1988 Code of practice for a system of tolerances for the dimensions of plastics mouldings
- BS 7289:1990 Specification for dimensions of three-piece tinplate aerosol cans
- BS 5542:1978 Specification for dimensions of test tubes made of glass or plastics for radioactivity measurements
- BS EN ISO 11963:2012 Plastics. Polycarbonate sheets. Types, dimensions and characteristics
- BS EN 15007:2017 Tracked Changes. Aerosol containers. Tinplate containers. Dimensions of two and three-piece cans
- BS 7442-4.3:1993 Rubber or plastics covered rollers. Requirements. Specification for dimensional tolerances
- 21/30439608 DC BS EN 13045. Packaging. Flexible cylindrical plastic tubes. Dimensions and tolerances
- BS EN 13974:2002 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume
- BS 2782-11 Method 1101A:1981 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Measurement of dimensions of pipes
- BS ISO TR 11761:1992 Light-gauge metal containers. Round open-top cans. Classification of can sizes by construction type
ES-UNE, Plastic jar size
Standard Association of Australia （SAA）, Plastic jar size
American National Standards Institute （ANSI), Plastic jar size
Professional Standard - Chemical Industry, Plastic jar size
Danish Standards Foundation, Plastic jar size
- DS/EN ISO 3126:2005 Plastics piping systems – Plastics components – Determination of dimensions
- DS 812:1995 Plastic mouldings-Tolerances and acceptance conditions of dimensions
- DS 2125:1989 Plastics pipes. Measurement of dimensions. Visual inspection of surfaces
- DS/ISO 2796:2011 Cellular plastics, rigid - Test for dimensional stability
- DS/EN ISO 1923:1995 Cellular plastics and rubbers - Determination of linear dimensions
- DS/EN ISO 11963:2012 Plastics - Polycarbonate sheets - Types, dimensions and characteristics
- DS/EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- DS/EN 13974:2002 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume
- DS/EN ISO 11501:2004 Plastics - Film and sheeting - Determination of dimensional change on heating
- DS/EN 15007:2007 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
- DS/EN 12712:2000 Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm
- DS/ISO 4671:1987 Rubber and plastics hose assemblies. Methods of measurement of dimensions
- DS/EN 12573-2:2001 Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks
- DS/ISO 11922-1:1998 Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series
未注明发布机构, Plastic jar size
PT-IPQ, Plastic jar size
Professional Standard - Forestry, Plastic jar size
- LY/T 1403-1999 Laminated wood plastics.Compreg Size of test specimens
- LY/T 1404-1999 Laminated wood plastice.Compreg Measurement of test specimens
American Society for Testing and Materials (ASTM), Plastic jar size
- ASTM D2749-92(1999)e1 Standard Symbols for Dimensions of Plastic Pipe Fittings
- ASTM D2749-22 Standard Symbols for Dimensions of Plastic Pipe Fittings
- ASTM D2122-98e1 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D2122-22 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D2749-02 Standard Symbols for Dimensions of Plastic Pipe Fittings
- ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2749-02(2008) Standard Symbols for Dimensions of Plastic Pipe Fittings
- ASTM D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2122-98 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D2122-98(2004) Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D955-21 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D2911-10 Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM D2749-13 Standard Symbols for Dimensions of Plastic Pipe Fittings
- ASTM D6289-13 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
- ASTM D2122-98(2010) Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D955-89(1996) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D955-00 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D955-08 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D955-08(2014) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D5947-02 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D5947-06 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D5947-03 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D5947-96 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D5947-01e1 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D3576-20 Standard Test Method for Cell Size of Rigid Cellular Plastics
- ASTM D5947-18 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D3576-15 Standard Test Method for Cell Size of Rigid Cellular Plastics
- ASTM D6289-13(2019) Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
- ASTM D5947-11 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D1042-93 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
- ASTM D1042-01a Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
- ASTM D1042-01 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
- ASTM D3576-04 Standard Test Method for Cell Size of Rigid Cellular Plastics
- ASTM D3576-04(2010) Standard Test Method for Cell Size of Rigid Cellular Plastics
ANSI - American National Standards Institute, Plastic jar size
- IT12.2-1995 Photography (Imaging Materials) - 135-Size Film Canister Lids - Composition
- B151.11-1982 Plastics Machinery - Granulators@ Pelletizers@ and Dicers Used for Size Reduction of Plastics - Construction@ Care@ and Use (SPI)
AENOR, Plastic jar size
- UNE 53246:1981 PLASTICS. DETERMINATION OF DIMENSION STABILITY OF THERMOPLASTIC MOULDED ARTICLES
- UNE-EN ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
- UNE 53319:2001 Cellular plastics, rigid. Test for dimensional stability.
- UNE-EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- UNE-EN 15007:2017 Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
- UNE-EN 13974:2003 Rigid plastic containers. Specification of tolerance for dimensions, weight and volume.
- UNE-EN ISO 1923:1996 CELLULAR PLASTICS AND RUBBERS. DETERMINATION OF LINEAR DIMENSIONS. (IS0 1923:1981)
- UNE-EN ISO 11963:2013 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
- UNE-EN 12712:2001 Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm
- UNE 125200:1992 LIGHT GAUGE METAL CONTAINERS. OPEN TOP-CANS FOR FISH CONSERVES AND SEMICONSERVES. DIMENSIONS AND CAPACITIES FOR NOT ROUND CONTAINERS.
- UNE-EN 12573-2:2001 WELDED STATIC NON-PRESSURISED THERMOPLASTICS TANKS. PART 2: CALCULATION OF VERTICAL CYLINDRICAL TANKS.
- UNE 49359:1988 AEROSOL CONTAINERS. DIMENSIONS OF 20 MM FINISH FOR 1 PIECE CANS
VN-TCVN, Plastic jar size
Taiwan Provincial Standard of the People's Republic of China, Plastic jar size
Lithuanian Standards Office , Plastic jar size
- LST EN ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
- LST EN 13045-2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- LST EN 13974-2003 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume
- LST EN ISO 11963:2013 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
- LST EN ISO 1923:2002 Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981)
- LST EN 15007-2007 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
- LST EN 12712-2002 Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm
- LST EN 12573-2-2000 Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks
- LST EN ISO 11501:2005 Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995)
Association of German Mechanical Engineers, Plastic jar size
AR-IRAM, Plastic jar size
BE-NBN, Plastic jar size
TR-TSE, Plastic jar size
- TS 1856-1975 RIGID CELLULAR PLASTICS — DETERMINATION OF LINEAR DIMENSIONS
Japanese Industrial Standards Committee (JISC), Plastic jar size
- JIS B 6701:1992 Dimensions relating to molds for plastics injection molding machines
- JIS K 7249:2006 Rigid cellular plastics -- Determination of dimensional stability
- JIS K 7153:2008 Plastics -- Determination of linear dimensions of test specimens
- JIS K 7109:1986 General tolerancing rules for plastics dimensions
- JIS K 7248:2005 Cellular plastics and rubbers -- Determination of linear dimensions
- JIS S 6032:1993 Plastics rulers
- JIS S 6032:2004 Plastics rulers
- JIS K 6735:1999 Plastics -- Polycarbonate sheets -- Types, dimensions and characteristics
- JIS K 6735:2006 Plastics -- Polycarbonate sheets -- Types, dimensions and characteristics
- JIS K 7133:1999 Plastics -- Film and sheeting -- Determination of dimensional change on heating
- JIS K 6735:2014 Plastics.Polycarbonate sheets.Types, dimensions and characteristics
- JIS B 6702:1992 Dimensions relating to molds for plastics compression molding machines and plastics transfer molding machines
Professional Standard - Railway, Plastic jar size
- TB/T 1626-1985 Dimensional tolerances of communication signal plastic parts
Professional Standard - Military and Civilian Products, Plastic jar size
- WJ 1266-1981 Dimensional tolerance of plastic parts (limited standard)
国家市场监督管理总局、中国国家标准化管理委员会, Plastic jar size
- GB/T 39743-2021 Plain bearings—Thermoplastic bushes—Dimensions and tolerance
Professional Standard - Machinery, Plastic jar size
- JB/T 12648-2016 Two-component injection moulds for plastics.Structural types and dimensions
- JB/T 12643-2016 Stack injection moulds for plastics.Structural types and dimensions
- JB/T 5819-1991 Type and size of wire and cable plastic extrusion equipment
- JB/T 2450-1999 The type and basic data and the size for slag pot car
- JB/T 2450-2010 The type and basic data and the size for slag pot car
- JB/T 6766-1993 Dimensional tolerance for rubber and plastic parts intended to be used in lead-acid batteries
AT-ON, Plastic jar size
GM Daewoo, Plastic jar size
Group Standards of the People's Republic of China, Plastic jar size
KR-KS, Plastic jar size
- KS M ISO 3126-2016 Plastics piping system－Plastics piping components－Measurement and determination of dimensions
- KS M ISO 11963-2019 Plastics — Polycarbonate sheets — Type, dimensions and characteristics
- KS M ISO 6123-3-2018 Rubber-or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
- KS M ISO 11922-1-2022 Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
Professional Standard - Construction Industry, Plastic jar size
- JG/T 176-2005 Function structure measurement of plastic window/door and profile
- JG/T 176-2015 Functional structural dimensions of plastic doors, windows and profiles
(U.S.) Ford Automotive Standards, Plastic jar size
- FORD WM960-1993 DIMENSIONS, MATERIAL AND PERFORMANCE OF A PLASTIC MULTI-PURPOSE CONNECTION FEATURE
ES-AENOR, Plastic jar size
- UNE 53-498-1991 Cellular plastics and rubbers. Determination of linear dimensions
IT-UNI, Plastic jar size
TH-TISI, Plastic jar size
United States Navy, Plastic jar size
CY-CYS, Plastic jar size
CH-SNV, Plastic jar size
International Electrotechnical Commission (IEC), Plastic jar size
- IEC 60583:1977 Dimensions of test tubes made of glass or plastics for radioactivity measurements
Professional Standard - Building Materials, Plastic jar size
- JC/T 587-1995 Filament wound reinforced plastics tanks
- JC/T 490-2010 Dimensional tolerance of thermosetting glass fibre reinforced plastics pultruded shapes
Military Standards (MIL-STD), Plastic jar size
NO-SN, Plastic jar size
- NS 6125-1986 Plastic pipes - Pipes of glass fibre reinforced polyester (GRP) - Dimensions - For marine use
GOSTR, Plastic jar size
- GOST 25015-2017 Celluar plasticsand and foam rubber. Method for measuring linear dimensions
- GOST ISO 11922-1-2019 Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Part 1. Metric series
IN-BIS, Plastic jar size
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Plastic jar size
- ASHRAE 4217-1998 Thermal Performance of a Full-Scale Stratified Chilled-Water Thermal Storage Tank
U.S. Military Regulations and Norms, Plastic jar size
API - American Petroleum Institute, Plastic jar size
工业和信息化部, Plastic jar size
CEN - European Committee for Standardization, Plastic jar size
- EN ISO 11963:2012 Plastics - Polycarbonate sheets - Types@ dimensions and characteristics
Society of Automotive Engineers (SAE), Plastic jar size
- SAE RS-403-1-1950 RS403 Dimensions for Mounting Rings and for Circular Flanges of Tank Mounted Accessories
Defense Logistics Agency, Plastic jar size
Professional Standard - Petroleum, Plastic jar size
Malaysia Standards, Plastic jar size
- MS 1501-2000 Method of test for measuring shrinkage from mould dimensions of moulded plastics