ZH
RU
ES

contact plate area

contact plate area, Total:145 items.

In the international standard classification, contact plate area involves: Linear and angular measurements, Materials and articles in contact with foodstuffs, Kitchen equipment, Lifting equipment, Metrology and measurement in general, Equipment for entertainment, Gears, Machine tool systems, Electromechanical components for electronic and telecommunications equipment, Electrical accessories, Road vehicle systems, Bearings, Paper and board, Electrical engineering in general, Heat treatment, Agricultural machines, implements and equipment, Electronic display devices, Ergonomics, Medical equipment, Adhesives, Pharmaceutics, Tobacco, tobacco products and related equipment, Textile fibres, Cutting tools.

AASHTO - American Association of State Highway and Transportation Officials, contact plate area

DIVISION I 3.30-1996 Tire Contact Area (Interim 1999;)

International Organization for Standardization (ISO), contact plate area

ISO/DIS 25178-601:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Design and characteristics of contact (stylus) instruments
ISO 25178-607:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments
ISO/DIS 25178-603:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Design and characteristics of non-contact (phase shifting interferometry) instruments
ISO/DIS 25178-602:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments
ISO/DIS 25178-604:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments
ISO 10649-5:2012 Cutter arbors with parallel key and tenon drive - Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
ISO/FDIS 24118-1:1964 Paper and board — Stylus contact method — Part 1: Determination of surface roughness
ISO 24118-1:2023 Paper and board — Stylus contact method — Part 1: Determination of surface roughness
ISO/FDIS 12164-5 Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES
ISO/FDIS 12164-3 Hollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and U
ISO/DIS 5686-1 Tapered polygonal interface with flat contact surface — Part 1: Shanks of type F, H, A
ISO 1726-3:2010 Road vehicles - Mechanical couplings between tractors and semi-trailers - Part 3: Requirements for semi-trailer contact area to fifth wheel
ISO/TS 13732-2:2001 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 2: Human contact with surfaces at moderate temperature
ISO 9341:1996 Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses
ISO/FDIS 12164-1 Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB
ISO 1726-3:2023 Road vehicles — Mechanical couplings between tractors and semi-trailers — Part 3: Requirements for semi-trailer contact area to fifth wheel

AGMA - American Gear Manufacturers Association, contact plate area

91FTM16-1991 Contact Analysis of Gears Using a Combined Finite Element and Surface Integral Method

German Institute for Standardization, contact plate area

DIN EN ISO 8442-8:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000
DIN EN ISO 25178-601:2023-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO/DIS 25178-601:2023); German and English version prEN ISO 25178-601:2023 / Note: Date of issue 2023-10-06*Inten...
DIN EN ISO 25178-606:2016-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015); German version EN ISO 25178-606:2015
DIN EN ISO 25178-607:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments (ISO 25178-607:2019); German version EN ISO 25178-607:2019
DIN EN ISO 25178-601:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010); German version EN ISO 25178-601:2010
DIN EN ISO 25178-603:2014-02 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013); German version EN ISO 25178-603:2013
DIN 41618-1:1966 Multipole connectors with blade contacts 2,5 mm 1 mm; dimensions
DIN EN ISO 8442-6:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000
DIN EN ISO 25178-604:2013-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013); German version EN ISO 25178-604:2013
DIN EN ISO 25178-701:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010); German version EN ISO 25178-701:2010
DIN EN ISO 25178-602:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010); German version EN ISO 25178-602:2010
DIN EN ISO 25178-602:2023-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments (ISO/DIS 25178-602:2023); German and English version prEN ISO 25178-602:2023 / Note: Date of ...
DIN 46008:1987-01 Flat contact surfaces for earthing screws; rated voltage not exceeds 52 kV
DIN 46008:1987 Flat contact surfaces for earthing screws; rated voltage not exceeds 52 kV
DIN ISO 12240-2:1999 Spherical plain bearing - Part 2: Angular contact spherical plain radial bearings (ISO 12240-2:1998)
DIN 41543:1974 Side contacts for picture tubes and cathode ray tubes
DIN EN ISO 12179:2023-04 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021); German version EN ISO 12179:2022
DIN 41622-1:1965-01 Multipole Connectors with Blade Contacts 3 × 1 mm; Dimensions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, contact plate area

GB/T 16269-1996 Facial contacted wire ropes

Professional Standard - Ferrous Metallurgy, contact plate area

YB/T 5359-2006 surface contact wire rope

American Gear Manufacturers Association, contact plate area

AGMA 91FTM16-1991 Contact Analysis of Gears Using a Combined Finite Element and Surface Integral Method

Group Standards of the People's Republic of China, contact plate area

T/SLIA 001-2019 Food contact materials and articles, adornment—Determination of surface area— Three-dimensional model reconstruction method
T/CSTM 00919-2023 Thermal contact resistance of thermal interface materials - Photothermal radiation technique

British Standards Institution (BSI), contact plate area

BS EN ISO 25178-607:2019 Geometrical product specifications (GPS). Surface texture: Areal - Nominal characteristics of non-contact (confocal microscopy) instruments
BS ISO 12164-2:2001 Hollow taper interface with flange contact surface. Receivers. Dimensions
BS ISO 12164-2:2002 Hollow taper interface with flange contact surface - Receivers - Dimensions
BS ISO 12164-1:2001 Hollow taper interface with flange contact surface. Shanks. Dimensions
BS ISO 1726-3:2010 Road vehicles. Mechanical couplings between tractors and semi-trailers. Requirements for semi-trailer contact area to fifth wheel
BS ISO 12164-1:2002 Hollow taper interface with flange contact surface - Shanks - Dimensions
BS ISO 1726-3:2023 Road vehicles. Mechanical couplings between tractors and semi-trailers - Requirements for semi-trailer contact area to fifth wheel
BS EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Nominal characteristics of contact (stylus) instruments
PD ISO/TS 13732-2:2001 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Human contact with surfaces at moderate temperature
BS 9522 N0001:1982 Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling with front release, rear removable crimp contacts - Full assessment level
BS 9526 N0001:1978 Detail specification for multi-contact edge socket electrical connectors - Single or double sided, closed ended, replaceable contacts, through-board solder or wire wrap terminations - Full assessment level
BS EN 828:2013 Adhesives. Wettability. Determination by measurement of contact angle and surface free energy of solid surface
BS 9526 N0003:1979 Detail specification for multi-contact edge socket electrical connectors - Single or double sided, open ended, guide key location, replaceable contacts, through-board solder or wire wrap terminations - Full assessment level
BS EN ISO 12179:2022 Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments

Professional Standard - Machinery, contact plate area

JB/T 11271-2012 Contact(stylus)surface contour tester

Military Standards (MIL-STD), contact plate area

DOD A-A-53992-1989 LENS, CONTACT, THREE-MIRROR, GOLDMANN

American National Standards Institute （ANSI), contact plate area

ANSI/ASTM F1933:1998 Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent
ISO/DIS 5686-1:2023 Tapered polygonal interface with flat contact surface - Part 1: Shanks of type F, H, A
ISO/DIS 5686-2:2023 Tapered polygonal interface with flat contact surface - Part 2: Receivers of type F, H, A and X for shanks of type F, H and A

ES-UNE, contact plate area

UNE-EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) (Endorsed by AENOR in September of 2015.)
UNE-EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 25178-603:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 12179:2023 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)

KR-KS, contact plate area

KS B 1417-2018(2023) Tooth contact marking of gears

AT-ON, contact plate area

ONORM M 1114-1982 Measurement of surface roughness with contact (Stylus) Instruments

CEN - European Committee for Standardization, contact plate area

EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss

Association Francaise de Normalisation, contact plate area

NF ISO 23223:2021 Chaussures de ski pour skis alpins dotées de semelles de marche améliorées - Zone de contact avec les fixations de ski alpin - Exigences et méthodes d'essai
NF E05-056*NF EN ISO 12179:2022 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
NF EN ISO 25178-605:2014 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 605 : caractéristiques nominales des instruments sans contact (capteur autofocus à point)
NF E62-507-2*NF ISO 12164-2:2002 Hollows taper interface with flange contact surface - Part 2 : receivers - Dimensions
NF E62-514-5*NF ISO 10649-5:2012 Cutter arbors with parallel key and tenon drive - Part 5 : dimensions and designation of tool holders with polygonal interface with flange contact surface
NF E62-507-1*NF ISO 12164-1:2002 Hollow taper interface with flange contact surface - Part 1 : shanks - Dimensions
NF D32-320:1991 HEATING IN CONTACT WITH THE FRONT OF THE DOMESTIC COOKING APPLIANCES BURNING GAS.

Korean Agency for Technology and Standards (KATS), contact plate area

KS M 4058-2021 Determination of stylus contact method of paper and board — Surface roughness
KS M 4057-2021 Determination of stylus contact method of paper and board — Surface friction
KS B ISO 12164-2-2005(2010) Hollow taper interface with flange contact surface－Part 2：Receivers－Dimensions

GM Daewoo, contact plate area

GMKOREA EDS-T-4530-2011 Test Procedure Headrest Head Contacting Surface

RO-ASRO, contact plate area

STAS 7903-1992 Hexagon nuts with, spherical contact face. Product grade A
STAS SR ISO 3274:1995 Instruments for the measurements of surface roughness by the profile method - Contact (stylus) instruments of consecutive profile transformation - Contact profile meters, system M
STAS 8473-1988 Petroleum equipment JUMPERS OF HOISTING EQUIPMENT Radii of contact surfaces

NL-NEN, contact plate area

NEN 2716-1992 Heating in contact with the front of the domestic cooking appliances burning gas

Danish Standards Foundation, contact plate area

DS/EN ISO 12179/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
DS/EN ISO 12179:2000 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
DS/EN ISO 3274/Corr. 1:2007 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
DS/EN ISO 3274:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
DS/ISO/TS 13732-2:2011 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 2: Human contact with surfaces at moderate temperature

International Electrotechnical Commission (IEC), contact plate area

IEC 60203:1966 Dimensions of the crimp area of machined crimp type contacts

FI-SFS, contact plate area

SFS 8453-1987 LAIVANRAKENNUS. LAIPPATIIVISTEET.RENGASTIIVISTEET
SFS 3317-1978

European Committee for Electrotechnical Standardization（CENELEC）, contact plate area

HD 1003-1990 Heating in Contact with the Front of the Domestic Cooking Appliances Burning Gas

Japanese Industrial Standards Committee (JISC), contact plate area

JIS B 1522:1993 Rolling bearings -- Angular contact ball bearings
JIS B 1522:2012 Rolling bearings -- Angular contact ball bearings
JIS B 0651 AMD 1:2022 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments (Amendment 1)
JIS B 6064-1:2007 Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions
JIS B 6064-2:2007 Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions

ES-AENOR, contact plate area

UNE 82-314-1991 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of consecutive profile transformation. Contact profile meters, system M

American Society for Testing and Materials (ASTM), contact plate area

ASTM F1933-98(2004) Standard Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent
ASTM D724-99 Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method)
ASTM D724-99(2003) Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method)

American Society of Mechanical Engineers (ASME), contact plate area

ASME B5.62M-2016 Hollow Taper Tooling With Flange-Face Contact
ASME B5.62M-2016(R2022) Hollow Taper Tooling with Flange-Face Contact

CZ-CSN, contact plate area

CSN 91 0278-1987 Furniture. Methods of determining the surfaee contact heat resistanee
CSN 63 1554-1983 Tyre testing. Retermination of t.yre / ground contact pressure
CSN ISO 3274:1994 Instruments for the measurement of surface roughness by the profile method.Contact(stylus)instruments of consecutive profile transformation.Contact profile meters,system M

IT-UNI, contact plate area

UNI 4823-1961

GOSTR, contact plate area

GOST R ISO/TU 13732-2-2008 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Part 2. Contact with moderate temperature surface

European Committee for Standardization (CEN), contact plate area

EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
FprEN ISO 12179:2021 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO/FDIS 12179:2021)
EN ISO 9341:1998 Optics and Optical Instruments - Contact Lenses - Determination of Inclusions and Surface Imperfections for Rigid Contact Lenses ISO 9341:1996

BR-ABNT, contact plate area

ABNT P-MB-320-1963

ZA-SANS, contact plate area

SANS 10217:2008 The heat treatment of ground-engaging parts for farming implements
SANS 12240-2:2006 Spherical plain bearings Part 2: Angular contact radial spherical plain bearings

Taiwan Provincial Standard of the People's Republic of China, contact plate area

CNS 6410-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears-Pinion Single Tooth Contact Factor ZB Wheel Single Tooth Contact Factor ZD and Transverse Contact Ratio εα

Lithuanian Standards Office , contact plate area

LST EN ISO 3274:2001 Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996)
LST EN ISO 12179:2001/AC:2008 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000/Cor 1:2003)

TR-TSE, contact plate area

TS 2495-1977 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD - CONTACT (STYLUS) INSTRUMENTS OF CONSECUTIVE PROF?LE TRANSFORMATION - CONTACT PROF?LE METERS. SYSTEM M

HU-MSZT, contact plate area

MSZ 15906-1958

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), contact plate area

MSS SP-6-2007 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., contact plate area

SP-6-1980 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-2007 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-1996 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-2012 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-2001 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-2017 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, contact plate area

GB/T 34662-2017 Electrotechnical equipment—Temperatures of touchable hot surfaces

ECIA - Electronic Components Industry Association, contact plate area

EIA/IS-47-1987 Contact Termination Finish Standard for Surface Mount Devices
498BAAA-1988 Detail Specification for Capability Approval of Metal Dome Contact Touch Stroke Switch Panels

Professional Standard - Aviation, contact plate area

HB/Z 89.2-1985 Calculation of Contact Fatigue Strength of Aeronautical Bevel Gear Tooth Surface

RU-GOST R, contact plate area

GOST R ISO/TS 13732-2-2008 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Part 2. Contact with moderate temperature surface
GOST R 57178-2016 Electric-contact method of surface hardening of details. Typical process

未注明发布机构, contact plate area

BS ISO 12164-2:2001(2002) Hollow taper interface with flange contact surface — Part 2 : Receivers — Dimensions

American Welding Society (AWS), contact plate area

WRC 335:1988 A Review of Area Replacement Rules for Pipe Connections in Pressure Vessels and Piping

ABMA - American Bearing Manufacturers Association, contact plate area

12240-2-1998 Spherical Plain Bearings - Part 2: Angular Contact Radial Spherical Plain Bearings

Professional Standard - Medicine, contact plate area

YY/T 1293.1-2016 Contacting wound dressing.Part 1: Paraffin gauze
YY/T 1293.4-2016 Contacting wound dressing.Part 4:Hydrocolloid dressing
YY 1293.5-2017 Contacting wound dressing—Part 5:Alginate dressing
YY/T 1293.4--2016
YY/T 1293.1--2016
YY/T 1293.5-2017 Contact Wound Dressings Part 5: Alginate Dressings

Professional Standard - Tobacco, contact plate area

YC/T 424-2011 Determination of surface wettability of paper for cigarette.Contact angle method

Guangdong Provincial Standard of the People's Republic of China, contact plate area

DB44/T 1872-2016 Determination of wettability of textile surfaces by contact angle method

工业和信息化部, contact plate area

JB/T 13925-2020 Detection method of polygonal pyramid shank with flange contact surface