ZH
RU
ES

area of the contact plate

area of the contact plate, Total:235 items.

In the international standard classification, area of the contact plate involves: Linear and angular measurements, Materials and articles in contact with foodstuffs, Kitchen equipment, Metrology and measurement in general, Gears, Machine tool systems, Electrical accessories, Equipment for entertainment, Road vehicle systems, Heat treatment, Agricultural machines, implements and equipment, Paper and board, Ergonomics, Electrical engineering in general, Electronic display devices, Tobacco, tobacco products and related equipment, Textile fibres, Cutting tools, Electromechanical components for electronic and telecommunications equipment, Medical equipment, Corrosion of metals, Ground service and maintenance equipment, Vocabularies, Adhesives, Electronic components in general, Freight distribution of goods, Fasteners for aerospace construction, Components and accessories for telecommunications equipment, Domestic, commercial and industrial heating appliances, Safety of machinery, Bearings, Earth-moving machinery, Petroleum products in general, IT terminal and other peripheral equipment, Protective equipment, Sterilization and disinfection, Products of the chemical industry, Lubrication systems, Air quality.

AASHTO - American Association of State Highway and Transportation Officials, area of the contact plate

DIVISION I 3.30-1996 Tire Contact Area (Interim 1999;)

International Organization for Standardization (ISO), area of the contact plate

ISO/DIS 25178-601:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Design and characteristics of contact (stylus) instruments
ISO 25178-607:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments
ISO/DIS 25178-603:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Design and characteristics of non-contact (phase shifting interferometry) instruments
ISO/DIS 25178-602:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments
ISO/DIS 25178-604:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments
ISO/FDIS 24118-1:1964 Paper and board — Stylus contact method — Part 1: Determination of surface roughness
ISO 24118-1:2023 Paper and board — Stylus contact method — Part 1: Determination of surface roughness
ISO/TS 13732-2:2001 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 2: Human contact with surfaces at moderate temperature
ISO 10649-5:2012 Cutter arbors with parallel key and tenon drive - Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
ISO/FDIS 12164-5 Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES
ISO/FDIS 12164-3 Hollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and U
ISO/DIS 5686-1 Tapered polygonal interface with flat contact surface — Part 1: Shanks of type F, H, A
ISO 1726-3:2023 Road vehicles — Mechanical couplings between tractors and semi-trailers — Part 3: Requirements for semi-trailer contact area to fifth wheel
ISO 9341:1996 Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses
ISO/FDIS 12164-1 Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB
ISO 12179:2021 Geometrical product specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments
ISO 12164-1:2001 Hollow taper interface with flange contact surface - Part 1: Shanks; Dimensions
ISO 12164-2:2001 Hollow taper interface with flange contact surface - Part 2: Receivers; Dimensions
ISO 1726-3:2010 Road vehicles - Mechanical couplings between tractors and semi-trailers - Part 3: Requirements for semi-trailer contact area to fifth wheel
ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
ISO/CD 25178-601 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments
ISO/FDIS 12164-6 Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES
ISO/FDIS 12164-4 Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U
ISO/DIS 5686-2 Tapered polygonal interface with flat contact surface — Part 2: Receivers of type F, H, A and X for shanks of type F, H and A
ISO/DIS 5686-3 Tapered polygonal interface with flat contact surface — Part 3: Coupling for driven tool holders with shanks of type F and A
ISO 3274:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments

German Institute for Standardization, area of the contact plate

DIN EN ISO 8442-8:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000
DIN EN ISO 25178-601:2023-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO/DIS 25178-601:2023); German and English version prEN ISO 25178-601:2023 / Note: Date of issue 2023-10-06*Inten...
DIN EN ISO 25178-606:2016-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015); German version EN ISO 25178-606:2015
DIN EN ISO 25178-607:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments (ISO 25178-607:2019); German version EN ISO 25178-607:2019
DIN EN ISO 25178-601:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010); German version EN ISO 25178-601:2010
DIN EN ISO 25178-603:2014-02 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013); German version EN ISO 25178-603:2013
DIN EN ISO 8442-6:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000
DIN EN ISO 25178-604:2013-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013); German version EN ISO 25178-604:2013
DIN EN ISO 25178-701:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010); German version EN ISO 25178-701:2010
DIN EN ISO 25178-602:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010); German version EN ISO 25178-602:2010
DIN 46008:1987-01 Flat contact surfaces for earthing screws; rated voltage not exceeds 52 kV
DIN EN ISO 25178-602:2023-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments (ISO/DIS 25178-602:2023); German and English version prEN ISO 25178-602:2023 / Note: Date of ...
DIN 41543:1974 Side contacts for picture tubes and cathode ray tubes
DIN 46008:1987 Flat contact surfaces for earthing screws; rated voltage not exceeds 52 kV
DIN EN ISO 12179:2023-04 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021); German version EN ISO 12179:2022
DIN 41622-1:1965-01 Multipole Connectors with Blade Contacts 3 × 1 mm; Dimensions
DIN EN ISO 8442-7:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000
DIN 41618-1:1966-10 Multipole connectors with blade contacts 2,5 mm × 1 mm; dimensions
DIN EN ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000); German version EN ISO 12179:2000
DIN EN ISO 12179:2023 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
DIN 628-3:2008 Rolling bearings - Angular contact radial ball bearings - Part 3: Double row
DIN ISO 12164-4:2018-12 Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools (ISO 12164-4:2014)
DIN EN ISO 3274:1998-04 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996); German version EN ISO 3274:1997
DIN EN 828:2013-04 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface; German version EN 828:2013

American Gear Manufacturers Association, area of the contact plate

AGMA 91FTM16-1991 Contact Analysis of Gears Using a Combined Finite Element and Surface Integral Method

AGMA - American Gear Manufacturers Association, area of the contact plate

91FTM16-1991 Contact Analysis of Gears Using a Combined Finite Element and Surface Integral Method
05FTM05-2005 Computerized Design of Face Hobbed Hypoid Gears: Tooth Surfaces Generation@ Contact Analysis and Stress Calculation

Group Standards of the People's Republic of China, area of the contact plate

T/SLIA 001-2019 Food contact materials and articles, adornment—Determination of surface area— Three-dimensional model reconstruction method

British Standards Institution (BSI), area of the contact plate

BS EN ISO 25178-607:2019 Geometrical product specifications (GPS). Surface texture: Areal - Nominal characteristics of non-contact (confocal microscopy) instruments
BS ISO 12164-2:2001 Hollow taper interface with flange contact surface. Receivers. Dimensions
BS ISO 12164-2:2002 Hollow taper interface with flange contact surface - Receivers - Dimensions
BS ISO 12164-1:2001 Hollow taper interface with flange contact surface. Shanks. Dimensions
BS ISO 12164-1:2002 Hollow taper interface with flange contact surface - Shanks - Dimensions
BS ISO 1726-3:2023 Road vehicles. Mechanical couplings between tractors and semi-trailers - Requirements for semi-trailer contact area to fifth wheel
BS EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Nominal characteristics of contact (stylus) instruments
PD ISO/TS 13732-2:2001 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Human contact with surfaces at moderate temperature
BS ISO 26623-2:2008 Polygonal taper interface with flange contact surface - Dimensions and designation of receivers
BS ISO 26623-2:2014 Polygonal taper interface with flange contact surface. Dimensions and designation of receivers
BS ISO 1726-3:2010 Road vehicles. Mechanical couplings between tractors and semi-trailers. Requirements for semi-trailer contact area to fifth wheel
BS 9522 N0001:1982 Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling with front release, rear removable crimp contacts - Full assessment level
BS EN ISO 12179:2022 Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
21/30434709 DC BS ISO 24118-1. Paper and board. Stylus contact method - Part 1. Determination of surface roughness
22/30458026 DC BS ISO 24118-1. Paper and board. Stylus contact method. Part 1. Determination of surface roughness
BS EN 828:1998 Adhesives. Wettability. Determination by measurement of contact angle and critical surface tension of solid surface
22/30404803 DC BS ISO 1726-3. Road vehicles. Mechanical couplings between tractors and semi-trailers - Part 3. Requirements for semi-trailer contact area to fifth wheel
BS EN ISO 13732-1:2006 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Hot surfaces
BS EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Cold surfaces
BS EN ISO 12179:2001 Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
BS EN 3202:1995 Holes and traps for T-head bolts - Design standard
BS 9210 N001-1:1975 Detail specification for radio frequency connectors (type BNC) - Sealed, soldered, captive contact, 50 ohms - Full assessment level
BS EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
20/30397768 DC BS EN ISO 12179. Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
BS ISO/IEC 22121-2:2023 Information technology. Virtual keyboards user interfaces - On-screen keyboards with direct touch interface
BS EN ISO 25178-606:2015 Geometrical product specification (GPS). Surface texture: Areal. Nominal characteristics of non-contact (focus variation) instruments
BS ISO 12044:1995 Rolling bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side
BS ISO 12044:2014 Rolling bearings. Single-row angular contact ball bearings. Chamfer dimensions for outer ring non-thrust side

KR-KS, area of the contact plate

KS B 1417-2018(2023) Tooth contact marking of gears
KS A ISO TS 13732-2-2021 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces —Part 2: Human contact with surfaces at moderate temperature
KS A ISO 3274-2019 Geometrical product specifications(GPS)－Surface texture：Profile method－Nominal characteristics of contact(stylus) instruments

ES-UNE, area of the contact plate

UNE-EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) (Endorsed by AENOR in September of 2015.)
UNE-EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 25178-603:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 12179:2023 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
ISO 12164-5:2023 Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES
ISO 12164-3:2023 Hollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and U

CEN - European Committee for Standardization, area of the contact plate

EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss

Association Francaise de Normalisation, area of the contact plate

NF ISO 23223:2021 Chaussures de ski pour skis alpins dotées de semelles de marche améliorées - Zone de contact avec les fixations de ski alpin - Exigences et méthodes d'essai
NF E05-056*NF EN ISO 12179:2022 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
NF EN ISO 25178-605:2014 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 605 : caractéristiques nominales des instruments sans contact (capteur autofocus à point)
NF E62-507-2*NF ISO 12164-2:2002 Hollows taper interface with flange contact surface - Part 2 : receivers - Dimensions
NF E62-514-5*NF ISO 10649-5:2012 Cutter arbors with parallel key and tenon drive - Part 5 : dimensions and designation of tool holders with polygonal interface with flange contact surface
NF D32-320:1991 HEATING IN CONTACT WITH THE FRONT OF THE DOMESTIC COOKING APPLIANCES BURNING GAS.
NF E62-507-1*NF ISO 12164-1:2002 Hollow taper interface with flange contact surface - Part 1 : shanks - Dimensions
NF A05-600*NF EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
NF E05-056:2000 Geometrical Product Specifications (GPS) - Surface texture : profil method - Calibration of contact (stylus) instruments.
NF H90-030:1991 SERIES 1 FREIGHT CONTAINERS. INTERFACE CONNECTIONS FOR TANK CONTAINERS.
NF E62-509-1:2021 Polygonal taper interface with flange contact surface - Part 1 : dimensions and designation of shanks
NF EN 60191-6-13:2017 Normalisation mécanique des dispositifs à semiconducteurs - Partie 6-13 : guide de conception pour les supports sans couvercle pour les boîtiers matriciels à billes et à pas fins (FBGA) et les boîtiers matriciels à zone de contact plate et à pa...
NF ISO 26623-2:2014 Interfaces à cône polygonal avec face d'appui - Partie 2 : dimensions et désignation des nez de broche
NF EN 828:2013 Adhésifs - Mouillabilité - Détermination par mesurage de l'angle de contact et de l'énergie superficielle libre de la surface solide

Korean Agency for Technology and Standards (KATS), area of the contact plate

KS M 4057-2021 Determination of stylus contact method of paper and board — Surface friction
KS M 4058-2021 Determination of stylus contact method of paper and board — Surface roughness
KS B ISO 12164-2-2005(2010) Hollow taper interface with flange contact surface－Part 2：Receivers－Dimensions
KS A ISO TS 13732-2:2021 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces —Part 2: Human contact with surfaces at moderate temperature
KS B ISO 12164-1-2005(2010) Hollow taper interface with flange contact surface－Part 1：Shanks－Dimensions
KS B ISO 12179:2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method-Calibration of contact(stylus) instruments
KS B ISO 12179:2014 Geometrical Product Specifications(GPS) — Surface texture: Profile method — Calibration of contact(stylus) instruments
KS B ISO 12164-2:2005 Hollow taper interface with flange contact surface-Part 2:Receivers-Dimensions
KS B ISO 12164-1:2005 Hollow taper interface with flange contact surface-Part 1:Shanks-Dimensions
KS B ISO 12164-1:2013 Hollow taper interface with flange contact surface－Part 1：Shanks－Dimensions
KS B ISO 12164-2:2013 Hollow taper interface with flange contact surface－Part 2：Receivers－Dimensions
KS A ISO 3274:2019 Geometrical product specifications(GPS)－Surface texture：Profile method－Nominal characteristics of contact(stylus) instruments
KS B ISO 16754-2012(2017) Earth-moving machinery－Determination of average ground contact pressure for crawler machines
KS B ISO 16754-2012(2022) Earth-moving machinery－Determination of average ground contact pressure for crawler machines

International Electrotechnical Commission (IEC), area of the contact plate

IEC 60203:1966 Dimensions of the crimp area of machined crimp type contacts

RO-ASRO, area of the contact plate

STAS 7903-1992 Hexagon nuts with, spherical contact face. Product grade A
STAS SR ISO 3274:1995 Instruments for the measurements of surface roughness by the profile method - Contact (stylus) instruments of consecutive profile transformation - Contact profile meters, system M
STAS 8473-1988 Petroleum equipment JUMPERS OF HOISTING EQUIPMENT Radii of contact surfaces
STAS 12561-1987 Geological investigation equipment JUMPERS FOR HOISTING EQUIPMENT Radii of contact'surfaces

ES-AENOR, area of the contact plate

UNE 82-314-1991 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of consecutive profile transformation. Contact profile meters, system M
UNE 82-304-1991

Danish Standards Foundation, area of the contact plate

DS/EN ISO 12179/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
DS/EN ISO 12179:2000 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
DS/EN ISO 3274/Corr. 1:2007 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
DS/EN ISO 3274:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
DS/ISO/TS 13732-2:2011 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 2: Human contact with surfaces at moderate temperature
DS/EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
DS/EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces
DS/EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces

American Society of Mechanical Engineers (ASME), area of the contact plate

ASME B5.62M-2016 Hollow Taper Tooling With Flange-Face Contact
ASME B5.62M-2016(R2022) Hollow Taper Tooling with Flange-Face Contact

American Society for Testing and Materials (ASTM), area of the contact plate

ASTM F1933-98(2004) Standard Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent
ASTM D724-99 Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method)
ASTM D724-99(2003) Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method)
ASTM C1055-03 Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
ASTM C1055-99 Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
ASTM C1055-20 Standard Guide for Heated System Surface Conditions that Produce Contact Burn Injuries
ASTM C1055-03(2014) Standard Guide for Heated System Surface Conditions that Produce Contact Burn Injuries
ASTM C1055-03(2009) Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
ASTM F1060-05 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact
ASTM E1153-94 Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate Non-Food Contact Surfaces
ASTM E1153-22 Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces
ASTM G204-21 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions

GOSTR, area of the contact plate

GOST R ISO/TU 13732-2-2008 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Part 2. Contact with moderate temperature surface

FI-SFS, area of the contact plate

SFS 3317-1978

BR-ABNT, area of the contact plate

ABNT P-MB-320-1963

ZA-SANS, area of the contact plate

SANS 10217:2008 The heat treatment of ground-engaging parts for farming implements

European Committee for Standardization (CEN), area of the contact plate

EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
FprEN ISO 12179:2021 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO/FDIS 12179:2021)
EN ISO 9341:1998 Optics and Optical Instruments - Contact Lenses - Determination of Inclusions and Surface Imperfections for Rigid Contact Lenses ISO 9341:1996
EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
EN ISO 12179:2022 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
EN ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Calibration of Contact (Stylus) Instruments
EN ISO 3274:1997 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Nominal Characteristics of Contact (Stylus) Instruments

RU-GOST R, area of the contact plate

GOST R ISO/TS 13732-2-2008 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Part 2. Contact with moderate temperature surface
GOST R 57178-2016 Electric-contact method of surface hardening of details. Typical process
GOST R 51547-2000 Hollow taper shank with flat contact surface type HSK of tools. Basic dimensions
GOST R 8.651-2009 State system for ensuring the uniformity of measurements. Contact (stylus) instruments for the measurement of surface roughness. Procedure of calibration

TR-TSE, area of the contact plate

TS 2495-1977 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD - CONTACT (STYLUS) INSTRUMENTS OF CONSECUTIVE PROF?LE TRANSFORMATION - CONTACT PROF?LE METERS. SYSTEM M

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, area of the contact plate

GB/T 34662-2017 Electrotechnical equipment—Temperatures of touchable hot surfaces

CZ-CSN, area of the contact plate

CSN 63 1554-1983 Tyre testing. Retermination of t.yre / ground contact pressure
CSN ISO 3274:1994 Instruments for the measurement of surface roughness by the profile method.Contact(stylus)instruments of consecutive profile transformation.Contact profile meters,system M
CSN 26 9631-1988 Unit load and rack cell. Dimensional continuity of contact surfaces

ECIA - Electronic Components Industry Association, area of the contact plate

EIA/IS-47-1987 Contact Termination Finish Standard for Surface Mount Devices
498BAAA-1988 Detail Specification for Capability Approval of Metal Dome Contact Touch Stroke Switch Panels
EIA-364-60A-2008 TP-60A General Methods for Testing of Contact Finishes for Electrical Connectors and Sockets
EIA/ECA-364-60A-2008 TP-60A GENERAL METHODS FOR TESTING OF CONTACT FINISHES FOR ELECTRICAL CONNECTORS AND SOCKETS

American National Standards Institute （ANSI), area of the contact plate

ISO/DIS 5686-2:2023 Tapered polygonal interface with flat contact surface - Part 2: Receivers of type F, H, A and X for shanks of type F, H and A
ISO/DIS 5686-1:2023 Tapered polygonal interface with flat contact surface - Part 1: Shanks of type F, H, A
ISO/DIS 5686-3:2023 Tapered polygonal interface with flat contact surface - Part 3: Coupling for driven tool holders with shanks of type F and A
ANSI/EIA 364-1005:2011 Environmental Test Methodology for Determining the Susceptability of Contacts to Fretting Corrosion

Lithuanian Standards Office , area of the contact plate

LST EN ISO 3274:2001 Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996)
LST EN ISO 12179:2001/AC:2008 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000/Cor 1:2003)

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), area of the contact plate

MSS SP-6-2007 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., area of the contact plate

SP-6-1980 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-2007 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-1996 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-2012 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-2001 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-2017 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings

Professional Standard - Tobacco, area of the contact plate

YC/T 424-2011 Determination of surface wettability of paper for cigarette.Contact angle method

Guangdong Provincial Standard of the People's Republic of China, area of the contact plate

DB44/T 1872-2016 Determination of wettability of textile surfaces by contact angle method

工业和信息化部, area of the contact plate

JB/T 13925-2020 Detection method of polygonal pyramid shank with flange contact surface

未注明发布机构, area of the contact plate

BS ISO 12164-2:2001(2002) Hollow taper interface with flange contact surface — Part 2 : Receivers — Dimensions
BS EN ISO 3274:1998(1999) Geometric Product Specifications (GPS) — Surface texture : Profile method — Nominal characteristics of contact (stylus) instruments —

PL-PKN, area of the contact plate

PN H74374-08-1986 Valves and pipelines Flanged connections Diaphragm-weld steel packings for flanges with piane contact surfaces
PN H74374-05-1986 Valves and pipelines Flanged connections Corrugated sealings for flanges withpiane contact surfaces
PN H74374-10-1986 Valves and pipelines Flanged connections Multiredge steel sealings for flanges with piane contact surfaces
PN H74374-02-1986 Valves and pipelines Flanged connections Asbestos-rubber sealings for flanges with piane contact surfaces

Japanese Industrial Standards Committee (JISC), area of the contact plate

JIS B 6064-1:2007 Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions
JIS B 6064-2:2007 Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions
JIS B 0651 AMD 1:2022 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments (Amendment 1)

IT-UNI, area of the contact plate

IPC - Association Connecting Electronics Industries, area of the contact plate

IPC TM-650 2.2.17-1990 Surface Roughness and Profile of Metallic Foils (Contacting Stylus Technique)
IPC TM-650 2.2.17A-2001 Surface Roughness and Profile of Metallic Foils (Contacting Stylus Technique)

Society of Automotive Engineers (SAE), area of the contact plate

SAE AS1852D-2012 Nozzles and Ports - Gravity Fueling Interface Standard for Civil Aircraft

Defense Logistics Agency, area of the contact plate

DLA A-A-55531 A-2008 CONNECTORS, TELECOMMUNICATION, POLARIZED SHELL, RECEPTACLE, FEMALE RACK AND PANEL, SOLDER CONTACT, SIDE ENTRY COVER, SCREWLOCK
DLA DSCC-DWG-02007 REV A-2004 CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 396 CONTACT POSITIONS
DLA DSCC-DWG-03023 REV A-2004 CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 396 CONTACT POSITIONS

Electronic Components, Assemblies and Materials Association, area of the contact plate

ECA 498B000-1988 Sectional Specification for Touch Stroke Switch Panels of Certified Quality

HU-MSZT, area of the contact plate

MSZ MI 4730/6-1980

Electronic Components, Assemblies and Materials Association, area of the contact plate

ECA EIA-364-60A-2008 TP-60A General Methods for Testing of Contact Finishes for Electrical Connectors and Sockets
ECA 448-20-1989 Method 20 Test Method for Electromechanical Components Test Method for Lens Face Touch Temperature

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, area of the contact plate

GB/T 19449.1-2004 Hollow taper interface with flange contact surface--Part 1:Shanks--Dimensions
GB/T 19600-2004 Geometrical Product Specifications(GPS)Surface texture:Profile method-Calibration of contact(stylus)instruments
GB/T 19449.2-2004 Hollow taper interface with flange contact surface--Part 2:Receivers--Dimensions
GB/T 6062-2009 Geometrical Product Specifications(GPS).Surface texture:Profile method.Nominal characteristic of contact(stylus) instruments
GB/T 32557.1-2016 Polygonal taper interface with flange contact surface.Part 1:Dimensions and designation of shanks
GB/T 6062-2002 Geometrical product specifications (GPS)--Surface texture:Profile method--Nominal characteristics of contact(stylus)instruments
GB/T 18153-2000 Safety of machinery-Temperatures of touchable surfaces-Ergonomics data to establish temperature limit values for hot surfaces

Professional Standard - Electron, area of the contact plate

SJ/T 10481-1994 Test method for resistivity of silicon epitaxial layers by area contacts three-probe techniques

Underwriters Laboratories (UL), area of the contact plate

UL 6944 BULLETIN-2015 UL Standard for safety Technical Panel for Contactors and Motor-Starters
UL 6944 BULLETIN-2012 UL Standard for safety Technical Panel for Contactors and Motor-Starters

Professional Standard - Energy, area of the contact plate

NB/SH/T 0567-2016 Determination of flammability of liquids in contact with hot surfaces - Manifold ignition method

国家能源局, area of the contact plate

SH/T 0567-2016 Determination of flammability of liquids in contact with hot surfaces - Manifold ignition method

ESDU - Engineering Sciences Data Unit, area of the contact plate

ESDU 94011 C-2010 Contact stress in disc cams with domed or flat faced followers
ESDU 94011 B-2004 Contact stress in disc cams with domed or flat faced followers.
ESDU 94011-1994 CONTACT STRESS IN DISC CAMS WITH DOMED OR FLAT FACED FOLLOWERS
ESDU 94011 A-2001 Contact stress in disc cams with domed or flat faced followers

SE-SIS, area of the contact plate

SIS SS 85 91 20-1983 Cross-country ski boots with three pin holes -Dimensions, interface and design

Standard Association of Australia （SAA）, area of the contact plate

AS ISO 16754:2021 Earth-moving machinery — Determination of average ground contact pressure for crawler machines