ZH
RU
ES

Three point bending flex test

Three point bending flex test, Total:174 items.

In the international standard classification, Three point bending flex test involves: Materials for aerospace construction, Glass, Plastics, Cellular materials, Farming and forestry, Construction materials, Products of the textile industry, Inorganic chemicals, Refractories, Solar energy engineering, Adhesives, Earthworks. Excavations. Foundation construction. Underground works, Electronic display devices, Leather technology, Road vehicle systems, Medical equipment, Welding, brazing and soldering, Valves, Paper and board, Pipeline components and pipelines, Insulating materials, Ceramics, Reinforced plastics, Paper products, Materials for the reinforcement of composites, Waxes, bituminous materials and other petroleum products, Wood-based panels, Products of the chemical industry, Electronic component assemblies, Raw materials for rubber and plastics.

FI-SFS, Three point bending flex test

SFS-ISO 6602 E:1986 This standard is approved in English

British Standards Institution (BSI), Three point bending flex test

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS IEC 61747-40-2:2015 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Uniaxial flexural strength (4-point bend)
BS EN 14617-2:2004 Agglomerated stone-Test methods-Part 2:Determination of flexural strength(bending)
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at high and low temperatures
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS EN ISO 10619-1:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at ambient temperature
BS EN ISO 10619-2:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Cyclic bending test

German Institute for Standardization, Three point bending flex test

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2009 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN ISO 11093-7:2012 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 16841:2012 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three point bending flex test

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass—Three-point bending method
GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites

American Society for Testing and Materials (ASTM), Three point bending flex test

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D4338-97(2004) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97(2011)e1 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78/C78M-15a Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15b Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D3111-99(2004)e1 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D3111-10 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C1609/C1609M-19 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-10 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C947-03 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C947-99 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM C598-93(2003) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2008) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2013) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D7249/D7249M-18 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM D7249/D7249M-20 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM C293/C293M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM D7972-14 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading

NO-SN, Three point bending flex test

NS 3543-1987 Flexible sheets - Cold crack test by bending

Japanese Industrial Standards Committee (JISC), Three point bending flex test

JIS K 7221-1:1999 Cellular plastics, rigid -- Flexural tests -- Part 1: Bending test
JIS K 6856:1994 Testing methods for flexural strength of adhesive bonds
JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)

American National Standards Institute （ANSI), Three point bending flex test

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones

European Committee for Standardization (CEN), Three point bending flex test

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
EN ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011)
EN ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011)

Danish Standards Foundation, Three point bending flex test

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

Lithuanian Standards Office , Three point bending flex test

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

AENOR, Three point bending flex test

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

International Organization for Standardization (ISO), Three point bending flex test

ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 5402:2002 Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
ISO 10619-1:2017 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness- Part 1:Bending tests at ambient temperature
ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
ISO 10619-2:2017 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

国家市场监督管理总局、中国国家标准化管理委员会, Three point bending flex test

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 38686-2020 Test method for flexibility of ultrathin glass—Two point bending method

Group Standards of the People's Republic of China, Three point bending flex test

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural

Korean Agency for Technology and Standards (KATS), Three point bending flex test

KS F 2325-2002 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2325-1982 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS M ISO 5402:2008 Leather-Physical and mechanical tests-Determination of flex resistance by flexometer method
KS M ISO 5402:2013 Leather－Physical and mechanical tests－Determination of flex resistance by flexometer method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method

Association Francaise de Normalisation, Three point bending flex test

NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF EN 1288-3:2000 Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 3 : essais avec éprouvettes supportées en deux points (flexion quatre points)
NF B10-602-2:2008 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending).
NF T47-203-1:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1 : bending tests at ambient temperature.
NF T47-203-3*NF EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3 : bending tests at high and low temperatures.
NF T47-203-2*NF EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2 : bending tests at sub-ambient temperatures
NF T47-203-2:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2 : bending tests at sub-ambient temperatures.
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

Society of Automotive Engineers (SAE), Three point bending flex test

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

Professional Standard - Medicine, Three point bending flex test

YY/T 0858-2011 Standard guide for three-piont bending of balloon expandable vascular stents and stent systems

Malaysia Standards, Three point bending flex test

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

Professional Standard - Machinery, Three point bending flex test

JB/T 7716-1995 Four-point bending fatigue test method for welded joints

KR-KS, Three point bending flex test

KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method

International Electrotechnical Commission (IEC), Three point bending flex test

IEC 61747-40-2:2015 Liquid crystal display devices - Part 40-2: Mechanical testing of display cover glass for mobile devices - Uni-axial flexural strength (4-point bend)

Aerospace, Security and Defence Industries Association of Europe (ASD), Three point bending flex test

ASD-STAN PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Three point bending flex test

PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

CEN - European Committee for Standardization, Three point bending flex test

EN 14617-2:2004 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN ISO 10619-2:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at subambient temperatures

European Association of Aerospace Industries, Three point bending flex test

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1
AECMA PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending Edition P1

Professional Standard - Aerospace, Three point bending flex test

QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials

RU-GOST R, Three point bending flex test

GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)

Professional Standard - Textile, Three point bending flex test

FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites

未注明发布机构, Three point bending flex test

BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

IT-UNI, Three point bending flex test

UNI 4818-P13-1974

AT-ON, Three point bending flex test

ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)

The American Road & Transportation Builders Association, Three point bending flex test

AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

AASHTO - American Association of State Highway and Transportation Officials, Three point bending flex test

T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)