ZH
RU
ES

Beam three-point bending test

Beam three-point bending test, Total:255 items.

In the international standard classification, Beam three-point bending test involves: Materials for aerospace construction, Glass, Farming and forestry, Construction materials, Plastics, Inorganic chemicals, Refractories, Products of the textile industry, Elements of buildings, Waxes, bituminous materials and other petroleum products, Road vehicle systems, Earthworks. Excavations. Foundation construction. Underground works, Solar energy engineering, Medical equipment, Road engineering, Valves, Paper and board, Pipeline components and pipelines, Welding, brazing and soldering, Reinforced plastics, Ceramics, Rubber and plastics products, Insulating materials, Structures of buildings, Materials for the reinforcement of composites, Wood-based panels, Products of the chemical industry, Adhesives, Raw materials for rubber and plastics, Aerospace fluid systems and components, Paper products, Corrosion of metals, Fruits. Vegetables, Electronic display devices, Aerospace electric equipment and systems, Electronic components in general, Electronic component assemblies.

British Standards Institution (BSI), Beam three-point bending test

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS EN 846-11:2000 Methods of test for ancillary components for masonry - Determination of dimensions and bow of lintels
BS ISO 11093-6:2007 Paper and board - Testing of cores - Determination of bending strength by the three-point method
BS EN ISO 7539-2:1990 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of bent-beam specimens
BS IEC 61747-40-2:2015 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Uniaxial flexural strength (4-point bend)
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS 1881-119:1983 Testing concrete - Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)
BS 1881-119:2011 Testing concrete. Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)

German Institute for Standardization, Beam three-point bending test

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN SPEC 1026:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010
DIN 16841:2012 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
DIN EN 846-11:2000 Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels; German version EN 846-11:2000
DIN 51944 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigendum to DIN 51944:1999-01
DIN EN 846-9:2000 Methods of tests for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels; German version EN 846-9:2000
DIN EN 658-5:2003-03 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Beam three-point bending test

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass—Three-point bending method
GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites

American National Standards Institute （ANSI), Beam three-point bending test

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones

American Society for Testing and Materials (ASTM), Beam three-point bending test

ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C1609/C1609M-19 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-10 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C947-03 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C947-99 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C598-93(2003) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2008) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2013) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E529-94(1998)e1 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM E529-04(2018) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78/C78M-18 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-21 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C947-03(2016) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C78/C78M-15a Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15b Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
ASTM C947-03(2023) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D1635/D1635M-19 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C393/C393M-06 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393/C393M-20 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78-00 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78-94 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D5418-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
ASTM E529-04 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM E529-04(2011) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM D747-02 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D747-08 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D7249/D7249M-12 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM D7249/D7249M-12e1 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM C293/C293M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C393/C393M-11 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393/C393M-11e1 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM D3929-03(2023) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM C393/C393M-16 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D3929-03 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM C293-00 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D7249/D7249M-18 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM D7249/D7249M-20 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM C293-07 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C78-07 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D3929-96e1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D3929-03(2010)e1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D3929-03(2015) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM C293/C293M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C293-08 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C293/C293M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D1635-00(2006) Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D1635-00 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D1635/D1635M-12 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D1634-00(2006) Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM D1634-00 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM D1634-17 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)

European Committee for Standardization (CEN), Beam three-point bending test

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 7539-2:1995 Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 2: Preparation and Use of Bent-Beam Specimen (ISO 7539-2: 1989)
DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)
EN 2591-416:2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength

Danish Standards Foundation, Beam three-point bending test

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
DS/EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test
DS/ENV 658-5:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)

Lithuanian Standards Office , Beam three-point bending test

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

Korean Agency for Technology and Standards (KATS), Beam three-point bending test

KS L 2401-1995 Testing method for annealing point and strain point of glass by beam bending
KS F 2378-2013(2019) Standard test method for flexural beam fatigue of asphalt mixtures
KS F 2325-2002(2017) Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2491-2017 Standard test method of the flexural beam test for porous asphalt binder
KS F 2491-2017(2022) Standard test method of the flexural beam test for porous asphalt binder
KS F 2325-2002 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2325-1982 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS F 2325-2002(2022) Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2413-1995 Testing method for compressive strength of concrete using portions of beams broken in flexure
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS F 2326-2002(2017) Testing method for compressive strength of soil－cement using portions of beam broken in flexure
KS F 2408-1995 Method of test for flexural strength of concrete(Using simple beam with third-point loading)
KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method
KS D ISO 7539-2:2001 Corrosion of metals and alloys-Stress corrosion testing-Part 2:Preparation and use of bent-beam specimens
KS D ISO 7539-2:2021 Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens
KS D ISO 7539-2:2016 Corrosion of metals and alloys－Stress corrosion testing－Part 2：Preparation and use of bent-beam specimens

国家市场监督管理总局、中国国家标准化管理委员会, Beam three-point bending test

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 38686-2020 Test method for flexibility of ultrathin glass—Two point bending method

AENOR, Beam three-point bending test

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

国家铁路局, Beam three-point bending test

TB/T 2092-2018 Test methods for simply supported beams Static load bending test of prestressed concrete beams

The American Road & Transportation Builders Association, Beam three-point bending test

AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
AASHTO T 97-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
AASHTO T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
AASHTO TP19-1993 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) 2000 Edition

AASHTO - American Association of State Highway and Transportation Officials, Beam three-point bending test

T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
TP1-1998 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1997 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 97-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
T 97-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 177-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
TP19-1993 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (Edition 1A)
T177-1997 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading) (Twentieth Edition; ASTM C293-94)
T 97-1997 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (HM-22; Part IIA; ASTM Designation C 78-94)

Society of Automotive Engineers (SAE), Beam three-point bending test

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
SAE AIR1529A-1989 Flexure Testing of Hydraulic Tubing Joints and Fittings by Planar Resonant Vibration (Free-Free Beam)

International Organization for Standardization (ISO), Beam three-point bending test

ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
ISO 22389-1:2010 Timber structures - Bending strength of I-beams - Part 1: Testing, evaluation and characterization
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

Group Standards of the People's Republic of China, Beam three-point bending test

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural

Professional Standard - Medicine, Beam three-point bending test

YY/T 0858-2011 Standard guide for three-piont bending of balloon expandable vascular stents and stent systems

Malaysia Standards, Beam three-point bending test

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

Association Francaise de Normalisation, Beam three-point bending test

NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF EN 1288-3:2000 Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 3 : essais avec éprouvettes supportées en deux points (flexion quatre points)
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
NF P12-611*NF EN 846-11:2000 Methods of test for ancillary components for masonry - Part 11 : determination of dimensions and bow of lintels
XP P98-092-1:2000 Road bridge roadway expansion joints related tests - Verification of the flexion of road bridge roadway expansion joints - Part 1 : test method independent of temperature
NF A05-501-2*NF EN ISO 7539-2:1995 Corrosion of metals and alloys. Stress corrosion testing. Part 2 : preparation and use of bent-beam specimen.
NF EN 658-5:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à température ambiante - Partie 5 : détermination de la résistance au cisaillement interlaminaire par essai de flexion sur appuis rapprochés (trois points)
XP P98-092-2:2000 Tests relating to the determination of expansion joints capacity - Verification of the flexion of road bridge roadway expansion joints - Part 2 : test method independent of temperature
NF C93-704-1-4*NF EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4 : cyclic bending test.
NF L54-002-059*NF EN 2591-416:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 416 : contact bending strength

Indonesia Standards, Beam three-point bending test

SNI 4154-2014 Standard test method for flexural strength of concrete (using simple beam with center-point loading)

VE-FONDONORMA, Beam three-point bending test

NORVEN 76-46-1966

KR-KS, Beam three-point bending test

KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS F 2326-2022 Test method for compressive strength of soil cement using portions of beam broken in flexure
KS D ISO 7539-2-2016 Corrosion of metals and alloys－Stress corrosion testing－Part 2：Preparation and use of bent-beam specimens
KS D ISO 7539-2-2021 Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens

Professional Standard - Railway, Beam three-point bending test

TB/T 2326-1992 Bending Fatigue Test Method for Prestressed Concrete Simply Supported Beams
TB/T 2092-2003 Post-tensioned pre-cast concrete simple-supported girder for railway bridge pro-stress

Professional Standard - Machinery, Beam three-point bending test

JB/T 7716-1995 Four-point bending fatigue test method for welded joints

Japanese Industrial Standards Committee (JISC), Beam three-point bending test

JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)
JIS A 1114:1993 Method of test for compressive strength of concrete using portions of beams broken in flexure
JIS A 1183:1995 Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure

TR-TSE, Beam three-point bending test

TS 1004-1971 PLASTICS DETERMINATlON OF THE CHARPY IMPACT RESISTANCE OF RIGID PLASTICS (CHARPY IMPACT FLEXURAL TEST)
TS 3285-1979 Flexural Strength Of Concrete (Using Simple Beam With Center Point Loading)
TS 3287-1979 STANDARD METHOD OF TEST FOR COMPRESSIVE STRENGTH OF CONCRETE USING PORTIONS OF BEAMS BROKEN IN FLEXURE
TS 3284-1979 Flexnral Strength Of Concrete (Using Simple Beam With Third-Point Loading)

RU-GOST R, Beam three-point bending test

GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)

未注明发布机构, Beam three-point bending test

BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Beam three-point bending test

PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

Professional Standard - Aerospace, Beam three-point bending test

QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials

Taiwan Provincial Standard of the People's Republic of China, Beam three-point bending test

CNS 13177-1993 Method of Test for Compressive Strength of Polyester Resin Concrete Using Portions of Beams Broken in Flexure
CNS 1233-1984 Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-point Loading)

Professional Standard - Textile, Beam three-point bending test

FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites

European Association of Aerospace Industries, Beam three-point bending test

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1
AECMA PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending Edition P1
AECMA PREN 2591-D16-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D16 - Contact Bending Strength Issue P 1

AT-ON, Beam three-point bending test

ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)

PL-PKN, Beam three-point bending test

PN C82055-02-1991 Test methods of pressed carbon products Determination of flexural strength by three-point method

IN-BIS, Beam three-point bending test

IS 4332 Pt.6-1972

US-FCR, Beam three-point bending test

FCR COE CRD-C 16-94-1997 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR FLEXURAL STRENGTH OF CONCRETE (USING SIMPLE BEAM WITH THIRD-POINT LOADING)

WRC - Welding Research Council, Beam three-point bending test

BULLETIN 299-1984 ENGINEERING ASPECTS OF CTOD FRACTURE TOUGHNESS TESTING ; THREE-DIMENSIONAL ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS OF THREE-POINT BEND SPECIMEN ; FAILURE PREDICTION OF NOTCHED PRESSURE VESSELS USING T

CENELEC - European Committee for Electrotechnical Standardization, Beam three-point bending test

EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test

Aerospace, Security and Defence Industries Association of Europe (ASD), Beam three-point bending test

ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

SG-SPRING SG, Beam three-point bending test

SS 78 Pt.A19-1987 Testing Concrete Part A19 : Method For Determination Of Compressive Strength Using Portions Of Beams Broken In Flexure (Equivalent Cube Method)

ES-UNE, Beam three-point bending test

UNE-EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) (Endorsed by AENOR in February of 2003.)

International Electrotechnical Commission (IEC), Beam three-point bending test

IEC 61747-40-2:2015 Liquid crystal display devices - Part 40-2: Mechanical testing of display cover glass for mobile devices - Uni-axial flexural strength (4-point bend)