ZH
RU
ES
Elastic Modulus
Elastic Modulus, Total:387 items.
In the international standard classification, Elastic Modulus involves: Continuous handling equipment, Construction materials, Wood, sawlogs and sawn timber, Plastics, Testing of metals, Ceramics, Conducting materials, Glass, Iron and steel products, Wood technology processes, Earthworks. Excavations. Foundation construction. Underground works, Insulating fluids, Rubber, Analytical chemistry, Cellular materials, Mechanical testing, Mining and quarrying, Wood-based panels, Powder metallurgy, Non-destructive testing, Non-ferrous metals, Textile fibres, Road engineering, Fuels, Road vehicles in general, Paper and board, Reinforced plastics, Technical drawings, Materials for the reinforcement of composites, Waxes, bituminous materials and other petroleum products, Refractories, Inorganic chemicals, Hydraulic fluids, Paints and varnishes, Structures of buildings, Insulating materials, Raw materials for rubber and plastics, Soil quality. Pedology.
FI-SFS, Elastic Modulus
ES-AENOR, Elastic Modulus
AASHTO - American Association of State Highway and Transportation Officials, Elastic Modulus
- DIVISION I 8.7-1996 Modulus of Elasticity and Poisson?s Ratio
- T 307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
- TP46-1994 Standard Test Method for Determining the Resilient Modulus of Soils and Aggregate Materials
- TP31-1996 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension
- TP31-1994 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension (Edition 1B)
- T292-1991 Standard Method of Test for Resilient Modulus of Subgrade Soils and Untreated Base/Subbase Materials (Eighteenth Edition)
- T 292-1997 Standard Method of Test for Resilient Modulus of Subgrade Soils and Untreated Base/Subbase Materials (No Superseded)
- T294-1994 Standard Method of Test for Resilient Modulus of Unbound Granular Base/ Subbase Materials and Subgrade Soils - SHRP Protocol P46
SE-SIS, Elastic Modulus
- SIS 20 03 11
- SIS SS 13 72 32-1983 Concrete testing - Hardened concrete - Modulus of elasticity in ompression
- SIS SS 13 73 09-1982 Autoclaved aerated concrete - Determination of modulus of elasticity at compression
- SIS SS 11 21 39-1987 Aliuminium and steel - Stranded con- uctors for overhead lines - Tensile esting for the determination of the odulus of elasticity
International Organization for Standardization (ISO), Elastic Modulus
- ISO 9856:1989 Conveyor belts; determination of elastic modulus
- ISO 3349:1975 Wood; Determination of modulus of elasticity in static bending
- ISO 6784:1982 Concrete; Determination of static modulus of elasticity in compression
- ISO 21181:2005 Light conveyor belts - Determination of the relaxed elastic modulus
- ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
- ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
- ISO 6073:1980 Hydraulic fluid power; Petroleum fluids; Prediction of bulk moduli
- ISO 16978:2003 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- ISO 3312:1987 Sintered metal materials and hardmetals; Determination of Young modulus
- ISO 9856:2003 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- ISO 11093-7:2011 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method
- ISO 21713:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
- ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 20343:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
- ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of thick ceramic coatings
Korean Agency for Technology and Standards (KATS), Elastic Modulus
- KS F 2437-2013 Standard test method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
- KS F 2437-2008 Testing method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
- KS F 2437-1982 Testing method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
- KS D ISO 12076-2006(2011) Steel wire ropes－Determination of the actual modulus of elasticity
- KS L 1598-2009 Testing method for elastic modulus of high performance ceramics at elevated temperature
- KS L 1598-1994 Testing methods for elastic modulus of high performance ceramics at elevated temperature
- KS L 1598-2009(2019) Testing method for elastic modulus of high performance ceramics at elevated temperature
- KS F 2438-2002 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS F 2438-1982 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS F 2376-2014 Standard test method for determining the resilient modulus of asphalt mixtures using indirect tensile mode
- KS M ISO 6073:2003 Petroleum products-Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
- KS F 2438-2017 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS F 2438-2017(2022) Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS M ISO 6073:2013 Petroleum products－Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
- KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
- KS F 2437-2019 Standard test method for dynamic modulus of elasticity, dynamic modulus of rigidity and dynamic Poisson’s ratio of concrete specimens by forced resonance apparatus
CZ-CSN, Elastic Modulus
- CSN 73 1360-1976 Determination of modulus of elasticity of cellular concrete
- CSN 49 0116-1976 Sawn timbor Testing ní' iikkIuIus of elasticity in bending
- CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
- CSN 49 0131-1982 Sawn timber. Determination of modulus of elasticity in static bending
- CSN 73 6174-1994
- CSN 34 6311-1984 Testing of ceramic elektrolochtiic mulo rials. Methods of determination of tin; elasticity modulus
- CSN 79 3819-1977 ting of leatliers. Apparent modulus iíiision elasticity, tensilc stiffncss I agreement modulus of leathers
- CSN 72 5021-1973 Testing of fired ceramic materials. Determination of the modullus of elasticity in tension
- CSN 64 0614-1981 Testing of plnstios. Determination f modulus of elasticity from tensile, ompresion and flexural tests
TR-TSE, Elastic Modulus
- TS 2478-1976 WOOD - DETERMINATION OF MODULUS OF ELASTICITY IN STATIC BENDING
- TS 3502-1981 TEST METHOD FOR STATIC MODULUS OF ELASTICITY AND POISSON'S RATIC OF CONCRETE IN COMPRESSION
Association Francaise de Normalisation, Elastic Modulus
- NF B10-511:1975 LIMESTONE - TEST FOR DYNAMIC MODULUS OF ELASTICITY.
- NF ISO 12076:2008 Câbles en acier - Détermination du module effectif d'élasticité
- NF A47-207*NF ISO 12076:2008 Steel wire ropes - Determination of the actual modulus of elasticity
- NF T47-154*NF EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
- NF EN ISO 21181:2013 Courroies transporteuses légères - Détermination du module d'élasticité relaxé
- NF B10-638*NF EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
- NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
- NF EN 14580:2005 Méthodes d'essai des pierres naturelles - Détermination du module d'élasticité statique
- NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
- NF T47-111:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus.
- NF T47-111*NF EN ISO 9856:2017 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- NF A95-336*NF EN 23312:1993 Sintered metal materials and hardmetals. Determination of young modulus.
- NF B51-123:1987 Wood based panels. Determination of modulus of elasticity in tension and of tensile strength parallel to faces.
- NF EN ISO 9856:2017 Courroies transporteuses - Détermination de l'allongement élastique et rémanent et calcul du module d'élasticité
- NF T47-111/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus - Amendment 1.
- NF EN 14146:2004 Méthodes d'essai pour pierres naturelles - Détermination du module d'élasticité dynamique (par la mesure de la fréquence de résonance fondamentale)
- NF B41-210-5*NF EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5 : determination of elastic moduli at elevated temperatures
- NF EN 820-5:2009 Céramiques techniques avancées - Propriétés thermomécaniques des céramiques monolithiques - Partie 5 : détermination des modules élastiques à températures élevées
- NF P18-938*NF EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression.
- NF EN 1352:1997 Détermination du module d'élasticité statique en compression du béton cellulaire autoclavé et du béton de granulats légers à structure ouverte
- NF B51-016:1987 Wood. Static bending. Determination of modulus of elasticity in static bending using small clear specimens.
- NF EN 13412:2006 Produits et systèmes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination du module d'élasticité en compression
- NF EN 13286-43:2003 Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 43 : méthode d'essai pour la détermination du module d'élasticité des mélanges traités aux liants hydrauliques
- NF B51-018:1988 Wood. Tensile parallel to grain. Determination of modulus of elasticity in tensile parallel to grain using small clear specimens.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Elastic Modulus
- GB/T 14694-1993 Plastics. Determination of compressive elastic modulus
- GB/T 5986-2000 Test method for modulus of elasticity of thermostat metals
- GB/T 1936.2-1991 Method for determination of the modulus of elasticity in static bending of wood
- GB/T 10700-1989 Test methods for elastic modulus of high performance ceramics
- GB/T 3074.2-2008 Method for the determination of the elastic modulus of graphite electrodes
- GB/T 1936.2-2009 Method for determination of the modulus of elasticity in static bending of wood
- GB/T 3074.2-1982 Method for determination of the elastic modulus of graphite electrodes
- GB/T 24191-2009 Steel wire ropes.Determination of the actual modulus of elasticity
- GB/T 1943-2009 Method for determination of the modulus of elasticity in compression perpendicular to grain of wood
- GB/T 15777-1995 Method for determination of the modulus of elasticity in compressive parallel to grain of wood
- GB/T 15902-1995 Conveyor belts--Determination of elastic modulus
- GB/T 1943-1991 Method for determination of the modulus of elasticity in compression perpendicular to grain of wood
- GB/T 10700-2006 Test methods for elastic moduli of fine ceramics (advanced ceramics,advanced technical ceramics).Bending method
- GB/T 24210-2009 Test method for the elastis modulus of whole graphite electrodes.Velocity of sound
- GB/T 43112-2023 Rate jump method for measuring elastic modulus of metallic materials
- GB/T 22315-2008 Metallic materials.Determination of modulus of elasticity and Poisson's ratio
- GB/T 5166-1998 Sintered metal materials and hardmetals--Determination of Young's modulus
- GB/T 5166-2023 Determination of elastic modulus of sintered metal materials and cemented carbide
- GB/T 11718.8-1989 Medium density fiberboard--Determination of static bending strength and elastic modulus
- GB/T 14453-1993 Metallic materials. Standard test method for the elastic modulus at high temperature. The method of disc. Vibrator
- GB/T 22906.7-2008 Testing of cores.Part 7:Determination of flexural modulus by the three-point method
- GB/T 43013-2023 Determination of dynamic elastic modulus of chemical fibers by acoustic pulse propagation method
- GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration
- GB/T 15902-2009 Conveyor belts-Determination of elastic and permanent elongation and calculation of elastic modulus
- GB/T 25898-2010 Instrumented nanoindentation test.Indentation hardness and modulus of thin film
- GB/T 28990-2012 Code for non-destructive evaluation of interior decay and modulus of elasticity of historic building wood members by stress wave methods
- GB/T 7897.6-1990 Test methods of mechanical properties of mortar for ferrocement--Test for static modulus of elasticity in compression
- GB/T 22906.8-2008 Testing of cores.Part 8:Determination of natural frequency and flexural modulus by experimental modal analysis
- GB 5594.2-1985 Test method for performance of structural ceramic materials for electronic components Test method for Young's modulus of elasticity and Poisson's ratio
- GB/T 5594.2-1985 Test methods for properties of structure ceramic used in electronic components--Test method for Young's elastic modulus and Poisson ratio
- GB/T 1927.13-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 13:Determination of the modulus of elasticity in compression perpendicular to grain
- GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
(U.S.) Ford Automotive Standards, Elastic Modulus
RO-ASRO, Elastic Modulus
- STAS 7168-1971 PLYWOOD Determination of the strength and moduls of elasticity bending
- STAS 9994-1975 WOOD Determination of modulus of elasticity by the dynamic method
- STAS 10574-1976 WOOD Detorminalion of the modulus of elasticity in shear by the dynamic method
- STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- STAS 5855-1990 CHIPBOARDS AND WOOD FIBREBOARDS Strength and elasticity modulus deter- minatiou at slalic bending
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Elastic Modulus
国家市场监督管理总局、中国国家标准化管理委员会, Elastic Modulus
- GB/T 37788-2019 Test method for elastic moduli of ultra-thin glass
- GB/T 39828-2021 Test method for determining elastic modulus of thick ceramic coating at elevated temperature
- GB/T 39686-2020 Test method for determining elastic modulus and strength of thick ceramic coatings
- GB/T 37780-2019 Test method for elastic modulus，shear modulus and Poisson's ratio of glass
- GB/T 38897-2020 Non-destructive testing—Measurement method for material elastic modulus and Poisson's ratio using ultrasoinc velocity
- GB/T 40406-2021 Standard test method for static modulus of elasticity and poisson's ratio of carbon materials in compression
- GB/T 39682-2020 Fine ceramics—Determination of elastic modulus at high temperature or ultra-high temperature—Split ring relative method
- GB/T 38989-2020 Uniaxial compressive elastic modulus test method of materials stabilazed with inorganic binder（middle segment method）
- GB/T 1927.10-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending
Professional Standard - Aviation, Elastic Modulus
- HB 5212-1982 Test method for high temperature modulus of elasticity of metals
- HB 5367.11-1986 Test method for modulus of elasticity of carbon graphite sealing materials
Professional Standard - Water Conservancy, Elastic Modulus
- SL 237-029-1999 Code for test of soil - elastic modulus test
- SL 135-2017 Calibration method of concrete dynamic elastic modulus tester
German Institute for Standardization, Elastic Modulus
- DIN 68364:2003 Properties of wood species - Density, modulus of elasticity and strength
- DIN EN ISO 21181:2007 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2005); German version EN ISO 21181:2006
- DIN EN ISO 21181:2013-09 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013); German version EN ISO 21181:2013
- DIN 68364:2003-05 Properties of wood species - Density, modulus of elasticity and strength
- DIN EN 14580:2005 Natural stone test methods - Determination of static elastic modulus; German version EN 14580:2005
- DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
- DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
- DIN EN 14580:2005-07 Natural stone test methods - Determination of static elastic modulus; German version EN 14580:2005
- DIN 52377:2016-07 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
- DIN EN ISO 9856:2017-03 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016); German version EN ISO 9856:2016
- DIN EN 12390-13:2019 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German and English version prEN 12390-13:2019
- DIN EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013); German version EN ISO 21181:2013
- DIN 51942:2002 Testing of carbonaceous materials - Determination of dynamic modulus of elasticity by pulse excitation - Solid materials
- DIN EN 14146:2004-06 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); German version EN 14146:2004
- DIN EN 1352:1997-02 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1352:1996
- DIN EN 820-5:2009-10 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures; German version EN 820-5:2009
- DIN EN ISO 9856:2017 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016); German version EN ISO 9856:2016
- DIN EN 13412:2006-11 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression; German version EN 13412:2006
- DIN 51942 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of dynamic moduls of elasticity by pulse excitation - Solid materials, Corrigenda to DIN 51942:2002-03
- DIN EN 13286-43:2003-07 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures; German version EN 13286-43:2003
- DIN EN ISO 9856:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003 + Amd 1:2012); German version EN ISO 9856:2003 + A1:2012
TH-TISI, Elastic Modulus
- TIS 1744-1999 Concrete.determination of static modulus of elasticity in compression
RU-GOST R, Elastic Modulus
- GOST 210-1975 Rubber. Method for the determination of elasticity modulus at extension
- GOST ISO 21181-2018 Light conveyor belts. Determination of the relaxed elastic modulus
- GOST 18336-1973 Rigid cellular plastics. Method of test for modulus of elasticity
- GOST R 50236-1992 Modified wood. Method for determination of modulus of elasticity in compression
- GOST 18336-2017 Rigid cellular plastics. Method of test for compressive modulus of elasticity
- GOST 16483.26-1973 Wood. Determination method of modulus of elasticity in tension along fibres
- GOST 16483.27-1973 Wood. Determination method of modulus of elasticity in tension along fibres
- GOST R 57603-2017 Reinforcing filler. Method for determination of tensile strength and modulus of elasticity
- GOST 9622-2016 Glued laminated wood. Methods for determination of ultimate strength and modulus of elasticity in tension
- GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
- GOST 18299-1972 Paintwork materials. Method for determination of tensile strength, relative elongation at tear and modulus of elasticity
- GOST 9900-2013 Glass and glass products. Methods for determination of mechanical properties. Determination of elasticity modulus at cross static bending
Professional Standard - Chemical Industry, Elastic Modulus
Japanese Industrial Standards Committee (JISC), Elastic Modulus
- JIS R 1602:1995 Testing methods for elastic modulus of fine ceramics
- JIS A 1149:2001 Method of test for static modulus of elasticity of concrete
- JIS A 1149:2010 Method of test for static modulus of elasticity of concrete
- JIS A 1149:2017 Method of test for static modulus of elasticity of concrete
- JIS A 1149 AMD 1:2022 Method of test for static modulus of elasticity of concrete (Amendment 1)
- JIS R 1605:1995 Testing methods for elastic modulus of fine ceramics at elevated temperature
- JIS R 1644:2002 Testing methods for elastic modulus of continuous fiber-reinforced ceramic matrix composites
- JIS A 1127:2001 Methods of test for dynamic modulus of elasticity, rigidity and Poisson's ratio of concrete by resonance vibration
- JIS A 1127:2010 Methods of test for dynamic modulus of elasticity, rigidity and Poisson's ratio of concrete by resonance vibration
Shandong Provincial Standard of the People's Republic of China, Elastic Modulus
- DB37/T 2263-2012 Determination of modulus of elasticity in tension of vulcanized rubber
YU-JUS, Elastic Modulus
- JUS U.M1.025-1982 Concrete. Determination of static modulus of elasticity in compression
- JUS B.F8.159-1987 Noncombustible mineral boards. Determination of.modulus ofelasticity in bending
- JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
- JUS D.A1.035-1979 Testingofwood. Determination ofmodulus ofelasticitv in static ben?ing
- JUS U.J6.226-1982 Teso'ng of cellular plastics; determination of the dynamic modulus ofelasticity and the loss factor
- JUS U.J6.236-1983 Testing of plastics and damped laminated systems.Bending vibration test;determination of complex modulus of elasticity
CEN - European Committee for Standardization, Elastic Modulus
- EN ISO 21181:2006 Light conveyor belts - Determination of the relaxed elastic modulus
European Committee for Standardization (CEN), Elastic Modulus
- EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
- EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
- EN ISO 9856:1995 Conveyor Belts - Determination of Elastic Modulus (ISO 9856 : 1989)
- EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
- prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
- EN 1723:1999 Light Conveyor Belts - Method of Test for the Determination of the Relaxed Elastic Modulus
- EN ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- EN 23312:1993 Sintered metal and hardmetals; determination of Young moduls (ISO 3312:1987)
- EN 12390-13:2013 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- EN 12390-13:2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- EN ISO 9856:2003 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus ISO 9856:2003
- EN ISO 9856:2003/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd 1:2012)
- EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
- DD ENV 843-2-1995 Advanced Technical Ceramics - Monolithic Ceramics - Mechanical Properties at Room Temperature - Part 2: Determination of Elastic Moduli
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Elastic Modulus
- GB/T 15777-2017 Method for determination of the modulus of elasticity in compression parallel to grain of wood
- GB/T 34367-2017 Light conveyor belts—Determination of the relaxed elastic modulus
- GB/T 15902-2017 Conveyor belts—Determination of elastic and permanent elongation and calculation of elastic modulus
Danish Standards Foundation, Elastic Modulus
- DS/EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
- DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- DS/ISO 6073:1989 Hydraulic fluid power. Petroleum fluids. Prediction of bulk moduli
- DS/EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
- DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
- DS/EN ISO 9856:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- DS/EN ISO 9856/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- DS/EN 12390-13:2021 Testing hardened concrete – Part 13: Determination of secant modulus of elasticity in compression
- DS/EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- DS/EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
- DS/EN 1352:2004 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- DS/EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
- DS/EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
British Standards Institution (BSI), Elastic Modulus
- BS EN ISO 21181:2013 Light conveyor belts. Determination of the relaxed elastic modulus
- BS EN 12390-13:2013 Testing hardened concrete. Determination of secant modulus of elasticity in compressio
- BS EN 12390-13:2021 Testing hardened concrete. Determination of secant modulus of elasticity in compression
- BS EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
- BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- BS EN ISO 9856:2003+A1:2012 Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
- BS EN ISO 9856:2016 Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
- BS 1881-209:1990 Testing concrete - Recommendations for the measurement of dynamic modulus of elasticity
- BS 1881-121:1983 Testing concrete - Method for determination of static modulus of elasticity in compression
- BS EN 14146:2004 Natural stone test methods - Determination of the dynamic elastic modulus of elasticity (by measuring the fundamental resonance frequency)
- BS 6319-3:1990 Testing of resin and polymer/cement compositions for use in construction - Methods for measurement of modulus of elasticity in flexure and flexural strength
- BS EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5:Determination of elastic moduli at elevated temperatures
- BS EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
- BS EN 13412:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
- BS EN 13286-43:2003(2017) Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
- BS EN 13286-43:2003 Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
- BS ISO 21713:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
- BS 2782-3 Methods 320A to 320F:1976 Methods of testing plastics - Mechanical properties - Tensile strength, elongation and elastic modulus
- BS EN 1352:1997 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- BS ISO 20343:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
- 19/30349557 DC BS ISO 21713. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
- BS ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of thick ceramic coatings
ES-UNE, Elastic Modulus
- UNE-EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013) (Endorsed by AENOR in April of 2013.)
- UNE-EN ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016) (Endorsed by AENOR in December of 2016.)
- UNE-EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures (Endorsed by AENOR in September of 2009.)
ACI - American Concrete Institute, Elastic Modulus
- ACI 364.5T-2010 Importance of Modulus of Elasticity in Surface Repair Materials
American Society for Testing and Materials (ASTM), Elastic Modulus
- ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C1591-04 Standard Test Method for Determination of the Modulus of Elasticity of AAC
- ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM E111-04 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
- ASTM E111-97 Standard Test Method for Young''s Modulus, Tangent Modulus, and Chord Modulus
- ASTM B223-97 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- ASTM B223-03 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- ASTM B223-08(2018) Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- ASTM B223-08(2013) Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- ASTM B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- ASTM D6793-02 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
- ASTM D3148-02 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
- ASTM D3148-96 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
- ASTM C469/C469M-14e1 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
- ASTM D6793-02(2012) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
- ASTM D6793-02(2007) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
- ASTM C469/C469M-22 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
- ASTM C469/C469M-10 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
- ASTM C120-05e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
- ASTM C469/C469M-14 Standard Test Method for Static Modulus of Elasticity and Poissonrsquo;s Ratio of Concrete in Compression
- ASTM C469-94 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
- ASTM C469-94e1 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
- ASTM C469-02 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
- ASTM C469-02e1 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
- ASTM D5858-96(2003) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
- ASTM D5858-96(2015) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
- ASTM D5858-96(2008) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
- ASTM C885-87(2002) Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
- ASTM C885-87(2007) Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
- ASTM D7369-09 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
- ASTM C885-87(2007)e1 Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
- ASTM D7369-20 Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
- ASTM C747-93(2005) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM C120/C120M-15 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
- ASTM C747-93(1998) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM C747-16 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM C747-23 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM C747-93(2010)e1 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM D5407-95(2000) Standard Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement
- ASTM D7012-07 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
- ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM D7291/D7291M-15 Standard Test Method for Through-Thickness &x201c;Flatwise&x201d; Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
- ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
- ASTM D5858-96e1 Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
- ASTM D5858-96(2020) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
- ASTM D7012-04 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
- ASTM D7012-07e1 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
- ASTM D7012-14e1 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
- ASTM D7012-23 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
- ASTM D7291/D7291M-22 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
- ASTM D7012-13 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
- ASTM C580-18(2023) Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
Professional Standard - Machinery, Elastic Modulus
- JB/T 6544-1993 Drawing and bending elastic modulus of plastics - Test method
水利部, Elastic Modulus
- SL/T 135-2017 Calibration method of concrete dynamic elastic modulus measuring instrument
Indonesia Standards, Elastic Modulus
- SNI 07-6733-2002 Test methods for elasticity of modulus, tangen of modulus, and chord of modulus
- SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength
- SNI 03-6836-2002 Test method of resilient modulus for asphalt mixture by indirect tensile
AENOR, Elastic Modulus
- UNE 53630:2010 Rubber. Determination of elasticity modulus shears. Quadruple-shear method.
- UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
- UNE 36745:2004 Test method for the determination of the modulus of elasticity of steel for reinforced concrete.
- UNE-EN 12390-13:2014 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- UNE-EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- UNE 22950-3:1990 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 3: MODULES OF ELASTICITY (YOUNG) AND POISSON'S RATIO DETERMINATION.
- UNE-EN 1352:1997 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- UNE-EN 13412:2008 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
- UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
- UNE-EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
NO-SN, Elastic Modulus
- NS 3676-1987 Concrete testing - Hardened concrete - Modules of elasticity in compression
Professional Standard - China Metal Association, Elastic Modulus
- CSM 01 01 02 03-2006 Uncertainty Evaluation of Measurement Result of Elastic Modulus of Steel Strand
Professional Standard - Forestry, Elastic Modulus
- LY/T 2382-2014 Standard test method for nondestructive evaluation of lumber using stress wave
NL-NEN, Elastic Modulus
- NEN-EN 310-1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
Lithuanian Standards Office , Elastic Modulus
- LST EN 14580-2005 Natural stone test methods - Determination of static elastic modulus
- LST EN ISO 21181:2007 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2005)
- LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- LST EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- LST EN ISO 9856:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003)
- LST EN 14146-2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- LST EN ISO 9856:2004/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd.1:2012)
- LST EN 820-5-2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
- LST EN 1352-2000 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- LST EN 13412-2007 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
- LST EN 13286-43-2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
未注明发布机构, Elastic Modulus
- BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
- BS EN 1723:2000 Light conveyor belts - Method of test for the determination of the relaxed elastic modulus
- BS 1881-209:1990(1998) Testing concrete — Part 209 : Recommendations for the measurement of dynamic modulus of elasticity
- DIN EN ISO 9856:2004 Conveyor belts – determination of elastic and permanent elongation and calculation of elastic modulus
- BS 1881-121:1983(1998) Testing concrete — Part 121 : Method for determination of static modulus of elasticity in compression
- BS 6319-6:1984(2011) Testing of resin compositions for use in construction — Part 6 : Method for determination of modulus of elasticity in compression
HU-MSZT, Elastic Modulus
Professional Standard - Building Materials, Elastic Modulus
- JC/T 678-1997 Test method for Young's modulus,shear modulus and Poisson's ratio of glass material
- JC/T 2172-2013 Aluminium titanate ceramic pipe for aluminium-melt feeding
Professional Standard - Ferrous Metallurgy, Elastic Modulus
- YB/T 5350-2006 Method for Measuring High Temperature Elastic Modulus of Metallic Materials by Disc Oscillator Method
Standard Association of Australia （SAA）, Elastic Modulus
SG-SPRING SG, Elastic Modulus
- SS 78 Pt.B9-1992 Testing Concrete Part B9 : Recommendations For The Measurement Of Dynamic Modulus Of Elasticity
- SS 78 Pt.A21-1987 Testing Concrete Part A21 : Method For Determination Of Static Modulus Of Elasticity In Compression
AT-ON, Elastic Modulus
- ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- OENORM EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- ONORM B 3124 Teil.9-1986 Testing of natural stone; mechanical properties of rock; modulus of elasticity, stress-strain curve and poisson's ratio under uniaxial compressive loading
The American Road & Transportation Builders Association, Elastic Modulus
- AASHTO T 307-1999(R2007) Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
- AASHTO DIVISION I 8.7 Modulus of Elasticity and Poisson's Ratio(Standard Specifications for Highway Bridges, Div. 1 - Design)
- AASHTO T 307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
- AASHTO T307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials Twentieth Edition
- AASHTO T 292-1997 Standard Method of Test for Resilient Modulus of Subgrade Soils and Untreated Base/Subbase Materials HM-22; Part IIA R(2000)
- AASHTO TP31-1996 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension 2000 Edition; Interim Edition 4/2001
Professional Standard - Electron, Elastic Modulus
- SJ 2317-1983 Test methods for elasticity modulus and loss factor of paper stock for loudspeakers
BE-NBN, Elastic Modulus
IN-BIS, Elastic Modulus
IX-SA, Elastic Modulus
Professional Standard - Non-ferrous Metal, Elastic Modulus
- YS/T 63.13-2016 Test methods for carbon materials for aluminum - Part 13: Determination of elastic modulus
工业和信息化部, Elastic Modulus
- JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method
IT-UNI, Elastic Modulus
- UNI EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
VN-TCVN, Elastic Modulus
- TCVN 5726-1993 Heavy weight concrete.Method for determination of prismatic compressive strength and static modulus of elasticity
- TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength
GM Daewoo, Elastic Modulus
- GMKOREA EDS-T-7510-2006 TESTING OF PLASTICS DETERMINATION OF THE MODULUS OF ELASTICITY BY TENSILE, COMPRESSION AND FLEXURAL TEST (VERSION: 4)
American National Standards Institute （ANSI), Elastic Modulus
- ANSI/ASTM C747:2005 Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending
US-FCR, Elastic Modulus
- FCR COE CRD-C 166-92-1992 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR STATIC MODULUS OF ELASTICITY OF CONCRETE IN TENSION
ZA-SANS, Elastic Modulus
- SANS 6083:2004 Modulus of elasticity and modulus of rupture in static bending of solid timber and glued laminated timber in structural sizes
BELST, Elastic Modulus
- STB 1501-2013 Highways. Мethod of determination elastic modulus and uniformity consolidation of materials of layers of road designs
GOSTR, Elastic Modulus
- GOST R 57864-2017 Polymer composites. Test method for determination of through-thickness flatwise tensile strength and elastic modulus
NZ-SNZ, Elastic Modulus
- AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)