ZH
RU
ES

Blade Thickness Gauge

Blade Thickness Gauge, Total:278 items.

In the international standard classification, Blade Thickness Gauge involves: Insulating fluids, Semiconducting materials, Elements of buildings, Non-ferrous metals, Equipment for the paper industry, Plastics, Medical equipment, Paints and varnishes, Testing of metals, Pharmaceutics, Iron and steel products, Road vehicle systems, Linear and angular measurements, Non-metalliferous minerals, Tobacco, tobacco products and related equipment, Photography, Rubber and plastics products, Measurement of fluid flow, Analytical chemistry, Surface treatment and coating, Optical equipment, Solar energy engineering, Rotating machinery, Construction materials, Earthworks. Excavations. Foundation construction. Underground works, Products of the textile industry, Materials for the reinforcement of composites, Flexible drives and transmissions, Cinematography, Textile fibres, Cellular materials, Radiation measurements, Vocabularies, Soil quality. Pedology, Special purpose vehicles, Document imaging applications, Materials for aerospace construction, Non-destructive testing, Cork and cork products, Applications of information technology.

Professional Standard - Light Industry, Blade Thickness Gauge

QB 1055-1991 Thickness Meter
QB/T 5837-2023 Micrometer for tissue paper
QB/T 1055-2004 Paper and board-Tester of thickness
QB/T 1055-1998 Paper and board thickness tester
QB/T 1268-1991 Determination of thickness and width of finished fur test pieces

Professional Standard - Aviation, Blade Thickness Gauge

HB 20115-2012 Eddy current measurement method for thermal barrier coating thickness of aero-engine blades
HB 5647-1998 Labeling, Tolerance and Surface Roughness of Blade Airfoil
HB 5647-1981 Labeling, tolerance and smoothness of blade profile (Trial)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Blade Thickness Gauge

GB/T 6618-1995 Test method for thickness and total thickness variation of silicon slices
GB/T 6618-2009 Test method for thickness and total thickness variation of silicon slices
GB/T 30857-2014 Standard test method for thickness and thickness variation on sapphire substrates
GB/T 30867-2014 Test method for measuring thickness and total thickness variation of monocrystalline silicon carbide wafers
GB/T 30869-2014 Test method for thickness and total thickness variation of silicon wafers for solar cell
GB/T 29507-2013 Test method for measuring flatness,thickness and total thickness variation on silicon wafers.Automated non-contact scanning
GB/T 20220-2006 Plastic.Film and sheeting.Determination of average thickness of a sample,and average thickness and yield of a roll,by gravimetric techniques (gravimetric thickness)
GB/T 11378-2005 Metallic coatings.Measurement of coating thickness.Profilometric method
GB/T 6672-2001 Plastics film and sheeting Determination of thickness by mechanical scanning
GB/T 31294-2014 The core to wind turbine blade.Test method for facing cleavage of sandwich panels
GB/T 31225-2014 Test method for the thickness of silicon oxide on Si substrate by ellipsometer
GB/T 3389.5-1995 Test methods for the properties of piezoelectric ceramics--Thickness extension vibration mode for disk
GB/T 3389.6-1997 Test methods for properties of piezoelectric ceramics. Thickness-shear vibration mode for rectangular plate
GB/T 22789.2-2023 Rigid polyvinyl chloride sheets (sheets) for plastic products Part 2: Classification, size and properties of sheets with thickness less than 1mm
GB/T 25188-2010 Thickness measurements for ultrathin silicon oxide layers on silicon wafers X-ray photoelectron spectroscopy

PT-IPQ, Blade Thickness Gauge

NP EN 951-2000 Door leaves Methods for measurement of height,width,thickness and squareness
NP 2214-1986
NP 770-1988 Paper and board Determination of the thickness of single sheets and method of calculation of the apparent density of board
NP 2211-1986
NP 2212-1986

Korean Agency for Technology and Standards (KATS), Blade Thickness Gauge

KS D 0259-2012(2017) Methods of measurement of thickness,thickness variation and bow for silicon wafer
KS D 0259-2012(2022) Methods of measurement of thickness,thickness variation and bow for silicon wafer
KS D 0259-2012 Methods of measurement of thickness,thickness variation and bow for silicon wafer
KS B ISO 9339-1:2004 Optics and optical instruments-Contact lenses-Determination of the thickness-Part 1:Rigid contact lenses
KS B ISO 9339-1:2014 Optics and optical instruments — Contact lenses — Determination of the thickness — Part 1: Rigid contact lenses
KS B ISO 9339-2:2004 Optics and optical instruments-Contact lenses-Determination of thickness-Part 2:Hydrogel contact lenses
KS B ISO 9339-2:2014 Optics and optical instruments — Contact lenses — Determination of thickness — Part 2: Hydrogel contact lenses
KS M 3089-2009 Testing method for thickness of plastic film and sheeting
KS M 3089-1994 Testing method for thickness of plastic film and sheeting
KS M 3089-2013 Testing method for thickness of plastic film and sheeting
KS D ISO 4518-2012(2017) Metallic coatings－Measurement of coating thickness－Profilometric method
KS M ISO 4591:2007 Plastics-Film and sheeting-Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
KS D ISO 4519:2009 Electrodeposited metallic coatings and related finishes－Sampling procedures for inspection by attributes
KS D ISO 3497-2002(2017) Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
KS M ISO 11833-2-2012(2017) Plastics－Unplasticized poly(vinyl chloride) sheets－Types, dimensions and characteristics－Part 2：Sheets of thickness less than 1 mm
KS M 3501-2004(2009) Plastics－Unsaturated poly(vinyl chloride) sheets－Types, dimensions and characteristics－Part 1：Sheets of thickness not less than 1 mm
KS B ISO 9339-1-2014(2019) Optics and optical instruments — Contact lenses — Determination of the thickness — Part 1: Rigid contact lenses
KS B ISO 9339-2-2014(2019) Optics and optical instruments — Contact lenses — Determination of thickness — Part 2: Hydrogel contact lenses
KS D ISO 3868:2002 Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
KS D ISO 16413:2021 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
KS M ISO 11833-1:2018 Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm

CZ-CSN, Blade Thickness Gauge

CSN 64 0181-1986 Plastics. Methods of thickness determination of films and sheets
CSN ISO 4518:1994 Metallic coatings. Measurement of coating thickness. Profilometric method
CSN ISO 1879:1993 Instruments for the measurement of surface roughness by the profile method. Terminology
CSN ST SEV 1379-1978
CSN 72 1026-1992 Laboratory determination of the Shear Strength of soils by vane test
CSN ISO 1880:1993 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of progressive profile transformation. Profile recording instruments
CSN 42 0405-1978 Reverse bend test for sheets and strips of thickness to 3 mm
CSN ISO 3274:1994 Instruments for the measurement of surface roughness by the profile method.Contact(stylus)instruments of consecutive profile transformation.Contact profile meters,system M

German Institute for Standardization, Blade Thickness Gauge

DIN 96156:2011 Medical instruments - Retractor type Kocher, blade curved
DIN 96156:2017 Medical instruments - Retractor type Kocher, blade curved
DIN 50933:1987 Measurement of coating thickness by differential measurement using a stylus instrument
DIN 50933:2015 Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument
DIN V VDE V 0126-18-2-1:2007 Solar wafers - Part 2-1: Measuring the geometric dimensions of silicon wafers - Wafer thickness
DIN 50933:2015-08 Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument
DIN 50441-1:1996 Testing of materials for semiconductor technology - Determination of the geometric dimensions of semiconductor wafers - Part 1: Thickness and thickness variation
DIN ISO 4593:2019-06 Plastics - Film and sheeting - Determination of thickness by mechanical scanning (ISO 4593:1993)
DIN V VDE V 0126-18-2-2:2007 Solar wafers - Part 2-2: Measuring the geometric dimensions of silicon wafers - Variations in thickness
DIN IEC 61336:1999-05 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN ISO 4593:2019 Plastics - Film and sheeting - Determination of thickness by mechanical scanning (ISO 4593:1993)
DIN 50441-4:1999 Testing of materials for semiconductor technology - Determination of the geometric dimensions of semiconductor wafers - Part 4: Slice diameter, diamter variation, flat diameter, flat length, flat depth
DIN ISO 4347:2018 Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths (ISO 4347:2015)
DIN EN ISO 11833-2:2006-06 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2 : Sheets of thickness less than 1mm (ISO 11833-2:1998); German version EN ISO 11833-2:2006
DIN EN ISO 9342-1:2005-08 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005); German version EN ISO 9342-1:2005 / Note: To be replaced by DIN EN ISO 9342-1 (2022-07).
DIN ISO 4347:2011 Leaf chaines, clevises and sheaves - Dimensions, measuring forces and tensile strengths (ISO 4347:2004)
DIN EN ISO 9342-1:2022-07 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO/DIS 9342-1:2022); German and English version prEN ISO 9342-1:2022 / Note: Date of issue 2022-0...
DIN IEC 61336:1999 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN EN ISO 11833-1:2019-12 Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019); German version EN ISO 11833-1:2019
PAS 1022-2004 Reference procedure for the determination of optical and dielectric material properties and the layer thickness of thin films by ellipsometry
DIN EN ISO 9342-2:2006-02 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005); German version EN ISO 9342-2:2005
DIN EN ISO 9342-1:2023-10 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2023); German version EN ISO 9342-1:2023

Japanese Industrial Standards Committee (JISC), Blade Thickness Gauge

JIS H 0611:1994 Methods of measurement of thickness, thickness variation and bow for silicon wafer
JIS K 7130:1999 Plastics -- Film and sheeting -- Determination of thickness
JIS K 7130:1992 Testing methods for thickness of plastic film and sheeting

PL-PKN, Blade Thickness Gauge

PN D54051-1968 Tools for woodworking Thickness of saw blades

国家市场监督管理总局、中国国家标准化管理委员会, Blade Thickness Gauge

GB/T 37361-2019 Determination of the film thickness—Ultrasonic thickness gauge method
GB/T 40279-2021 Test method for thickness of films on silicon wafer surface—Optical reflection method
GB/T 40128-2021 Surface chemical analysis—Atomic force microscopy—Test method for thickness of the two-dimensional layered molybdenum disulfide nanosheets

American Society for Testing and Materials (ASTM), Blade Thickness Gauge

ASTM F533-96 Standard Test Method for Thickness and Thickness Variation of Silicon Wafers
ASTM F533-02 Standard Test Method for Thickness and Thickness Variation of Silicon Wafers
ASTM F1530-94 Standard Test Method for Measuring Flatness, Thickness, and Thickness Variation on Silicon Wafers by Automated Noncontact Scanning
ASTM D4166-99 Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument
ASTM E802-95(1999) Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness
ASTM E802-95(2010) Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness
ASTM D6132-13(2022) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D4166-99(2004)e1 Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument (Withdrwan 2008)
ASTM E446-14 Standard Reference Radiographs for Steel Castings Up to 2 in. &40;50.8 mm&41; in Thickness
ASTM E446-15 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASTM E252-06(2021)e1 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
ASTM D6132-13(2017) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM E252-06 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
ASTM E252-06(2013) Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
ASTM D6132-13 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM E592-20 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Film Radiography of Steel Plates 14 to 2 in. (6 to 51 mm) Thick with X-Rays and 1
ASTM E446-10 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASTM E1182-01 Standard Test Method for Measurement of Surface Layer Thickness by Radial Sectioning (Withdrawn 2002)
ASTM D8121/D8121M-18 Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device
ASTM D8121/D8121M-19 Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device
ASTM E802-19 Standard Reference Radiographs for Gray Iron Castings Up to 412 in. (114 mm) in Thickness
ASTM D6336-98 Standard Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer
ASTM D6336-98(2004) Standard Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer
ASTM D823-95(2012) Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
ASTM D823-95(2012)e1 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
ASTM D823-95(2007) Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels

HU-MSZT, Blade Thickness Gauge

MNOSZ 22307-1955

National Metrological Technical Specifications of the People's Republic of China, Blade Thickness Gauge

JJF(纺织) 020-2010 Calibration specification for fabric thickness instruments
JJF(纺织)020-2010 Calibration Specification for Fabric Thickness Instruments
JJF 1965-2022 Calibration Specification for Solder Paste Inspection Instruments
JJF(纺织) 13-1985 Verification method of Y531 fabric thickness meter
JJF(纺织) 101-2021 Calibration Specification for Geosynthetics Lever-Type Thickness Testers
JJF 1224-2009 Calibration Specification for Reinforced Concrete Covermeter and Floorslab Thickness Tester
JJF(纺织)101-2021 Calibration Specification for Geosynthetics Lever-Type Thickness Testers
JJF(纺织) 025-2015 Calibration Specification for Wool Fiber Comb Stapling Sorter
JJF(纺织)025-2015 Calibration Specification for Wool Fiber Comb Stapling Sorter
JJF(纺织) 025-2006 Calibration specification for comb type wool length analyzer

Professional Standard - Machinery, Blade Thickness Gauge

JB/T 20104-2007 Hardness tester
JB/T 8393-1996 Magnetic and eddy current measuring instrument for coating thickness

工业和信息化部, Blade Thickness Gauge

JB/T 20104-2022 Tablet Hardness Tester

Society of Automotive Engineers (SAE), Blade Thickness Gauge

SAE J1058-1999 Standard Sheet Steel Thickness and Tolerances
SAE AMS4254B-2006 Aluminum Alloy, Aramid Fiber Reinforced, Laminated Sheet, 4.4Cu - 1.5Mg - 0.6Mn (2024-T3), 3, 5, 7, or 9 Ply

SAE - SAE International, Blade Thickness Gauge

SAE J1058-1991 Sheet Steel Thickness and Profile@ Recommended Practice
SAE J1058-1976 Sheet Steel Thickness and Profile
SAE J1058-2015 Sheet Steel Thickness and Profile

The Society for Protective Coatings (SSPC), Blade Thickness Gauge

SSPC PA 9-2015 Measurement of Dry Coating Thickness Using Ultrasonic Gages
SSPC PA 9-2008 Measurement of Dry Coating Thickness on Cementitious Substrates Using Ultrasonic Gages

SSPC - The Society for Protective Coatings, Blade Thickness Gauge

PA 9-2015 Measurement of Dry Coating Thickness Using Ultrasonic Gages
PA 9-2008 Measurement of Dry Coating Thickness on Cementitious Substrates Using Ultrasonic Gages
PA GUIDE 9-2008 Measurement of Dry Coating Thickness on Cementitious Substrates Using Ultrasonic Gages

IT-UNI, Blade Thickness Gauge

UNI 5269-1963

British Standards Institution (BSI), Blade Thickness Gauge

BS EN 1529:2021 Tracked Changes. Door leaves. Height, width, thickness and squareness. Tolerance classes
BS 5806:1979 Method of measurement of thickness for mica blocks, thins, films and splittings
BS EN ISO 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method
BS ISO 8255-1:2011 Microscopes. Cover glasses. Dimensional tolerances, thickness and optical properties
BS IEC 61336:1996 Nuclear instrumentation. Thickness measurement systems utilizing ionizing radiation. Definitions and test methods
BS ISO 4347:2015 Leaf chains, clevises and sheaves. Dimensions, measuring forces, tensile strengths and dynamic strengths
BS 2782-6 Method 631A:1993 Methods of testing plastics. Dimensional properties. Determination of gravimetric thickness and yield of flexible sheet
BS 2782-6 Method 630A:1994 Methods of testing plastics. Dimensional properties. Determination of thickness by mechanical scanning of flexible sheet
PD IEC TR 63258:2021 Nanotechnologies. A guideline for ellipsometry application to evaluate the thickness of nanoscale films
BS 4044:1989 Methods for determination of fibre length by comb sorter diagram
BS IEC 61336:1998 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods
BS EN ISO 3868:1995 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method
22/30406184 DC BS EN ISO 9342-1. Optics and optical instruments. Test lenses for calibration of focimeters - Part 1. Reference lenses for focimeters used for measuring spectacle lenses
BS ISO 2385:1994 Corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and corkwaste. Sampling to determine moisture content
BS EN ISO 11833-2:2006 Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics - Sheets of thickness less than 1 mm
BS ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry. Instrumental requirements alignment and positioning, data collection, data analysis and reporting
BS ISO 16413:2020 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry. Instrumental requirements, alignment and positioning, data collection, data analysis and reporting

Group Standards of the People's Republic of China, Blade Thickness Gauge

T/CAMS 127-2023 Cable insulation thickness tester

Taiwan Provincial Standard of the People's Republic of China, Blade Thickness Gauge

CNS 6499-1980 Mica Blocks, Thins, Films and Splittings - Measurement of Thickness
CNS 13923-1997 Method of test for thickness of plastic film and sheeting
CNS 13788-1996 Methods of Test for Water Vapor Transmission Rate of Plastic Films and Sheets (Instrument Method)

Professional Standard - Ferrous Metallurgy, Blade Thickness Gauge

YB/T 045-2005 Test method for thickness of flake graphite
YB/T 045-1993 Method for measuring the thickness of flake graphite

GM Daewoo, Blade Thickness Gauge

GMKOREA EDS-T-2108-2011 Measurement of the Thickness of Clutch Linings

UNKNOWN, Blade Thickness Gauge

YB/T 045-93

SE-SIS, Blade Thickness Gauge

SIS SS IEC 577:1981 Nuclear instrumentation - lonizing radiation thickness meters

National Metrological Verification Regulations of the People's Republic of China, Blade Thickness Gauge

JJG(烟草) 23.2-2009 Verification Regulation of Detecting Instrument for Threshed Tobacco-Part 2:Lamina Selection Machine
JJG(烟草)23.2-2009 Verification Regulation of Detecting Instrument for Threshed Tobacco—Part 2:Lamina Selection Machine
JJG 818-2005 Magnetic and Eddy Current Measuring Instrument for Coating Thickness
JJG(轻工) 50-1990 Verification Regulations for Paper and Board Thickness Meter
JJG(民航) 0068-2001 856A1214P03 Generator Variable Stator Vane Transmitter Indicator Test Set
JJG 819-1993 Verification Regulation of Instrument for Measuring Thickness Variation of Bearing Ring
JJG 818-2018 Verification regulations for magnetic and eddy current coating thickness measuring instruments

Professional Standard - Chemical Industry, Blade Thickness Gauge

HG/T 3009-1999 Photographic film and film base-determination of thickness by mechanical scanning

Military Standard of the People's Republic of China-General Armament Department, Blade Thickness Gauge

GJB 3766-1999 Method for measuring the thickness of hard-based explosive foil of impact disk detonators - Surface profilometer method
GJB 3766-1999(XG1-2015) Method for measuring the thickness of hard-based explosive foils in impact disk detonators—Surface profilometer method modification sheet 1-2015
GJB 8687-2015 Calibration procedures for optical film refractive index and thickness testers

BR-ABNT, Blade Thickness Gauge

ABNT P-PB-52-1964

ES-UNE, Blade Thickness Gauge

UNE-ISO 3034:2016 Corrugated fibreboard. Determination of single sheet thickness
UNE-EN ISO 11833-1:2020 Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019)

International Organization for Standardization (ISO), Blade Thickness Gauge

ISO 4518:1980 Metallic coatings; Measurement of coating thickness; Profilometric method
ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO 8255-1:1986 Optics and optical instruments; Microscopes; Cover glasses; Part 1 : Dimensional tolerances, thickness and optical properties
ISO 5972:1978 Mica blocks, thins, films and splittings - Measurement of thickness
ISO 4347:2015 Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths
IEC TR 63258:2021 Nanotechnologies — A guideline for ellipsometry application to evaluate the thickness of nanoscale films
IEC/TR 63258:2021 Nanotechnologies — A guideline for ellipsometry application to evaluate the thickness of nanoscale films
ISO 8255-1:2011 Microscopes - Cover glasses - Part 1: Dimensional tolerances, thickness and optical properties
ISO 8255-1:2017 Microscopes - Cover glasses - Part 1: Dimensional tolerances, thickness and optical properties
ISO 11833-1:2019 Plastics — Unplasticized poly(vinyl chloride) sheets — Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm
ISO/FDIS 9342-1 Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Reference lenses for focimeters used for measuring spectacle lenses
ISO 9339-1:1996 Optics and optical instruments - Contact lenses - Determination of the thickness - Part 1: Rigid contact lenses
ISO 9342-1:2023 Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Reference lenses for focimeters used for measuring spectacle lenses
ISO 9339-2:1998 Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses
ISO 3868:1976 Metallic and other non-organic coatings; Measurement of coating thicknesses; Fizeau multiple-beam interferometry method
ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry - Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
ISO 16413:2020 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
ISO 9339-2:1998/Cor 1:2000 Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses; Technical Corrigendum 1

RU-GOST R, Blade Thickness Gauge

GOST 8.502-1984 State system for ensuring the uniformity of measurments. Coating thickness gauges. Verification methods and means
GOST 24680-1981 Rotating electrical machinery. Insulating collector plates. Row of thichnesses
GOST 8.495-1983 State system for ensuring the uniformity of measurements. Ultrasonic contact-type instruments for measurement of thickness. Verification methods and means
GOST 8910-1975 Measuring instruments of film length. Assumed perforation. Gear ratios
GOST 8.171-1975 State system of ensuring the uniformity of measurements. Actual measures of the surface density for radiation thickness gauges. General specifications

Guangdong Provincial Standard of the People's Republic of China, Blade Thickness Gauge

DB44/T 1207-2013 Magnetic and Eddy Current Coating Thickness Gauge

Association Francaise de Normalisation, Blade Thickness Gauge

NF EN ISO 12625-3:2014 Papier en tissue et produits tissue - Partie 3 : détermination de l'épaisseur, de l'épaisseur moyenne d'une feuille en liasse et de la masse volumique moyenne et de la main
NF A91-114:1995 Metallic coatings. Measurement of coating thickness. Profilometric method.
NF EN ISO 1463:2021 Revêtements métalliques et couches d'oxyde - Mesurage de l'épaisseur de revêtement - Méthode par coupe micrographique
NF EN ISO 18452:2016 Céramiques techniques - Détermination de l'épaisseur des films céramiques avec un profilomètre à contact
NF S12-024-1:1988 OPTICS AND OPTICAL INSTRUMENTS. MICROSCOPES. COVER GLASSES. PART 1 : DIMENSIONAL TOLERANCES,THICKNESS AND OPTICAL PROPERTIES.
NF EN ISO 11833-1:2019 Plastiques - Feuilles en poly(chlorure de vinyle) non plastifié - Partie 1 : types, dimensions et caractéristiques pour des plaques d'épaisseur non inférieure à 1 mm
NF EN ISO 11833-2:2006 Plastiques - Feuilles en poly(chlorure de vinyle) non plastifié - Types, dimensions et caractéristiques - Partie 2 : feuilles et films d'épaisseur inférieure à 1 mm
NF A91-117*NF EN ISO 3868:1995 Metallic and other non-organic coatings. Measurement of coating thicknesses. Fizeau multiple-beam interferometry method.
NF EN ISO 9342-2:2006 Optique et instruments d'optique - Verres étalons pour l'étalonnage des frontofocomètres - Partie 2 : verres étalons pour frontofocomètres utilisés pour le mesurage des lentilles de contact
NF EN ISO 2128:2010 Anodisation de l'aluminium et de ses alliages - Détermination de l'épaisseur des couches anodiques - Méthode non destructive par microscope à coupe optique
NF A92-810*NF EN ISO 18452:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer

CEN - European Committee for Standardization, Blade Thickness Gauge

PREN 16720-2-2014 Characterization of sludges - Physical consistency - Part 2: Determination of solidity - Method by pocket vane shear apparatus

RO-ASRO, Blade Thickness Gauge

STAS 7200-1973 PLASTICS Dotermination of thicknc;,s of films and sheets
STAS SR ISO 8255-1:1995 Optics and optical instruments Microscopes — Cover glasses Part 1: Dimensional tolerances, thickness and optical properties

IN-BIS, Blade Thickness Gauge

ZA-SANS, Blade Thickness Gauge

SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
SANS 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method
SANS 4593:2003 Plastics - Film and sheeting - Determination of thickness by mechanical scanning
SANS 10834:2003 Textile floor coverings - Non-destructive measurement of pile thickness above the backing - WRONZ gauge method
SANS 4044:2007 Methods for determination of fibre length by comb sorter diagram

National Electrical Manufacturers Association（NEMA), Blade Thickness Gauge

NEMA MS 5-2003 Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging

NEMA - National Electrical Manufacturers Association, Blade Thickness Gauge

NEMA MS 5-2010 Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging
NEMA MS 5-1991 Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging
NEMA MS 5-2018 Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging

AENOR, Blade Thickness Gauge

UNE-ISO 4591:2010 Plastics -- Film and sheeting -- Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
UNE-EN ISO 9342-1:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005)

YU-JUS, Blade Thickness Gauge

JUS C.A6.037-1991 Metali1c coatings. heasurement of coatlng tbickness. Profilometrlc metbo?

European Committee for Standardization (CEN), Blade Thickness Gauge

EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
EN ISO 4518:1995 Metallic Coatings - Measurement of Coating Thickness - Profilometric Method (ISO 4518:1990)
EN 20534:1993 Paper and Board - Determination of Thickness and Apparent Bulk Density or Apparent Sheet Density (ISO 534 : 1988)
EN ISO 9339-1:1998 Optics and Optical Instruments - Contact Lenses - Determination of the Thickness - Part 1: Rigid Contact Lenses ISO 9339-1:1996
EN ISO 9339-2:1998 Optics and Optical Instruments - Contact Lenses - Determination of Thickness - Part 2: Hydrogel Contact Lenses ISO 9339-2:1998
FprEN ISO 9342-1 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO/FDIS 9342-1:2023)
EN ISO 9342-1:2023 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2023)
EN ISO 3868:1994 Metallic and Other Non- Organic Coatings - Measurement of Coating Thicknesses - Fizeau Multiple-Beam Interferometry Method (ISO 3868 : 1976)
EN 2589:2017 Aerospace series - Steel - Sheet and strip@ cold rolled - Thickness 0@1 mm less than or equal to a less than or equal to 3 mm - Dimensions

工业和信息化部/国家能源局, Blade Thickness Gauge

JB/T 12962.3-2016 Energy dispersive X-ray fluorescence spectrometer Part 3: Coating thickness analyzer

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Blade Thickness Gauge

GJB/J 5463-2005 Verification regulation for measurement equipment of optical film refractive index and thickness

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Blade Thickness Gauge

ASHRAE 3901-1995 Experimental Study of Temperature@ Pressure@ Humidity@ and/or Density Effects on Vane Anemometers
ASHRAE 87.1-1992 Method of Testing Fan Vibration - Blade Vibrations and Critical Speeds
ASHRAE CI-01-4-2-2001 Effect of Successively Variable Louver Angle on the Air-Side Performance of Fin-and-Tube Heat Exchangers
ASHRAE 4435-2001 Experimental Determination of the Effects of Turbulence Intensity on the Performance of Rotating Vane Anemometers (RP-986)

Danish Standards Foundation, Blade Thickness Gauge

DS/EN ISO 4518:1995 Metallic coatings - Measurement of coating thickness - Profiliometric method
DS/EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses
DS/EN ISO 11833-2:2006 Plastics – Unplasticized poly(vinyl chloride) sheets – Types, dimensions and characteristics – Part 2: Sheets of thickness less than 1 mm
DS/EN ISO 11833-1:2012 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm
DS/ENV 1071-1:1993 Advanced technical ceramics. Methods of test for ceramic coatings. Part 1: Determination of coating thickness by contact probe profilometer

未注明发布机构, Blade Thickness Gauge

BS IEC 61336:1996(1999) Nuclear instrumentation — Thickness measurement systems utilizing ionizing radiation — Definitions and test methods
BS EN ISO 9342-1:2023 Optics and optical instruments — Test lenses for calibration of focimeters Part 1 : Reference lenses for focimeters used for measuring spectacle lenses
BS EN ISO 9339-1:1998 Optics and optical instruments — Contact lenses — Determination ofthe thickness — Part 1 : Rigid contact lenses

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Blade Thickness Gauge

GB/T 33826-2017 Measurement of nanofilm thickness on glass substrate—Profilometric method
GB/T 36053-2018 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry—Instrumental requirements, alignment and positioning, data collection, data analysis and reporting

U.S. Military Regulations and Norms, Blade Thickness Gauge

ARMY MIL-I-49466/1 VALID NOTICE 5-2006 DETAIL SPECIFICATION Insulator; Disks, Plates, and Washers Polyimide .002 or .005 Inch Thick

European Association of Aerospace Industries, Blade Thickness Gauge

AECMA PREN 2071-1989 Sheets in Aluminium and Aluminium Alloys - Thickness A Less Than or Equal to 6 mm - Dimensions (C6/A01)
AECMA PREN 2366-1983 Sheets and Strips Heat Resisting Alloys Cold Rolled Thickness a Less Than or Equal to 3 mm Dimensions Aerospace Series Edition 1
AECMA PREN 2589-1994 Aerospace Series Steel Sheet and Strip, Cold Rolled Thickness 0,1 mm Less Than or Equal to a Less Than or Equal to 3 mm Dimensions Edition P 1
AECMA PREN 4411-1998 Aerospace Series Sheets, Cold Rolled in Steel Thickness 0,5 mm Less Than or Equal to a Less Than or Equal to 3,0 mm Dimensions Edition P 1
AECMA PREN 4411-1997 Aerospace Series Sheets, Cold Rolled in Steel Thickness 0,5 mm Less Than or Equal to a Less Than or Equal to 3,0 mm Dimensions Edition 1

ES-AENOR, Blade Thickness Gauge

Defense Logistics Agency, Blade Thickness Gauge

DLA A-A-59606 VALID NOTICE 1-2007 ARM, WINDSHIELD WIPER: BLADE, WINDSHIELD WIPER: AND BLADE REFILL, WINDSHIELD WIPER

Liaoning Provincial Standard of the People's Republic of China, Blade Thickness Gauge

DB21/T 2838-2017 On-site test method for core material thickness of polymer waterproof material composite sheet (FS2)

Standard Association of Australia （SAA）, Blade Thickness Gauge

AS ISO 9342.1:2017 Optics and optical instruments — Test lenses for calibration of focimeters, Part 1: Test lenses for focimeters used for measuring spectacle lenses
AS 2282.4:1999 Methods for testing flexible cellular polyurethane - Determination of apparent density of flexible cellular polyurethane sheeting up to 13 mm thick

BE-NBN, Blade Thickness Gauge

NBN EN ISO 3868:1995 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam nterferometry method (ISO 3868:1976)

Indonesia Standards, Blade Thickness Gauge

SNI ISO 11833-2:2011 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm
SNI ISO 11833-1:2011 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm

Lithuanian Standards Office , Blade Thickness Gauge

LST EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005)

Association for Information and Image Management (AIIM), Blade Thickness Gauge

AIIM MS9-1987 Method for Measuring Thickness of Buildup Area on Unitized Microfilm Carriers (Aperture, Camera, Copy, and Image Cards) Addenda - 1996
AIIM MS9-1987(R1996) Method for Measuring Thickness of Buildup Area on Unitized Microfilm Carriers (Aperture, Camera, Copy, and Image Cards) Addenda - 1996

GM Europe, Blade Thickness Gauge

GME GMI L-7B01B-2-1998 Measurement of the Thickness of Clutch Linings (English/German; Includes Appendix 1; ITDC Release, Draft for Harmonization)

SG-SPRING SG, Blade Thickness Gauge

SS 373 Pt.5-1994 Specification for optics and optical instruments - contact lenses Part 5: Determination of thickness of rigid contact lenses

KR-KS, Blade Thickness Gauge

KS D ISO 16413-2021 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
KS M ISO 11833-1-2018 Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm

American Society of Mechanical Engineers (ASME), Blade Thickness Gauge

ASME SEC V B SE-446-2001 Standard Reference Radiographs for Steel Castings up to 2 in. (51 mm) in Thickness ASTM E446-93; DELETED