ZH
RU
ES

Cone calorimeter

Cone calorimeter, Total:243 items.

In the international standard classification, Cone calorimeter involves: Protection against fire, Analytical chemistry, Housings, enclosures, other machine parts, Thermodynamics and temperature measurements, Plastics, Electricity. Magnetism. Electrical and magnetic measurements, Cans. Tins. Tubes, Insulating materials, Fibre optic communications, Ergonomics, On-board equipment and instruments, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Quality, Air quality, Electrical accessories, Vocabularies, Linear and angular measurements, Gears, Mechanical testing, Iron and steel products, Protection of and in buildings, Barrels. Drums. Canisters, Electrical wires and cables, Burners. Boilers, Heat pumps, Spools. Bobbins, Resistors, Metrology and measurement in general, Installations in buildings, Graphical symbols, Elements of buildings, Industrial automation systems, Electrical engineering in general, Measurement of volume, mass, density, viscosity, Energy and heat transfer engineering in general, Surface treatment and coating, Non-ferrous metals, Optical equipment, Fuels.

British Standards Institution (BSI), Cone calorimeter

PD ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
BS ISO 5660-1:2015+A1:2019 Reaction-to-fire tests. Heat release, smoke production and mass loss rate - Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
DD 246-1999 Recommendations for the use of the cone calorimeter
PD ISO/TS 5660-5:2020 Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
BS EN ISO 13927:2001 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector
BS EN ISO 13927:2015 Plastics. Simple heat release test using a conical radiant heater and a thermopile detector
BS PD ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
BS EN ISO 13927:2023 Plastics. Simple heat release test using a conical radiant heater and a thermopile detector
23/30430975 DC BS EN ISO 13927 Plastics. Simple heat release test using a conical radiant heater and a thermopile detector
BS EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
BS ISO 5660-1:2015 Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
BS ISO 11944:1995 Round general use light gauge metal containers - Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity
23/30427576 DC BS ISO 23948. Plastics. Intumescence properties of PVC materials and products. Test method for the measurement of expansion with the cone calorimeter
PD ISO/TR 18476:2017 Ophthalmic optics and instruments. Free form technology. Spectacle lenses and measurement
BS EN 60264-3-5:1999 Packaging of winding wires. Taper barrelled delivery spools. Specification for spool containers made from thermoplastic material
23/30450169 DC BS EN ISO 7726. Ergonomics of the thermal environment. Instruments for measuring and monitoring physical quantities
BS EN 60264-4-2:1992 Packaging of winding wires. Methods of test. Containers made from thermoplastic material for taper barrelled delivery spools
BS IEC 61322:2020 Radiation protection instrumentation. Installed ambient dose equivalent rate meters, warning and monitoring assemblies for neutrons with energies from thermal to 20 MeV
BS 1646-3:1984 Symbolic representation for process measurement control functions and instrumentation - Specification for detailed symbols for instrument interconnection diagrams
BS EN 60264-4-2:1995 Packaging of winding wires. Methods of test. Containers made from thermoplastic material for taper barrelled delivery spools
BS EN 12373-12:2001 Aluminium and aluminium alloys - Anodizing - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments

海关总署, Cone calorimeter

SN/T 5240-2020 Cone calorimeter method for determination of heat release rate of imported and exported textiles

Danish Standards Foundation, Cone calorimeter

DS/ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
DS/EN ISO 13927:2003 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector
DS/EN 27726:1994 Thermal environments-Instruments and methods for measuring physical quantities
DS/EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
DS/ISO 5660-1:2003 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method)
DS/EN 60264-3-5:2000 Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material
DS/EN 13026:2001 Packaging - Light gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml
DS/EN 13025-1:2006 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml
DS 5009.08:1984 Graphical symbols for diagrams. Part 8: Measuring instruments, lamps and signalling devices
DS/EN 60264-4-2+A1/Corr.:2008 Packaging of winding wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools
DS/EN 60264-4-2+A1:2004 Packaging of winding wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools

German Institute for Standardization, Cone calorimeter

DIN 12664-1:1983 Laboratory glassware; one-mark volumetric flasks; volumetric flasks with flanged edge, conical socket and conical joint
DIN EN ISO 13927:2003 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2001); German version EN ISO 13927:2003
DIN 12555:1977 Laboratory glassware; double bore stopcocks with tail
DIN EN ISO 13927:2015-08 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015); German version EN ISO 13927:2015 / Note: To be replaced by DIN EN ISO 13927 (2023-02).
DIN EN ISO 13927:2023-02 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO/DIS 13927:2022); German and English version prEN ISO 13927:2022 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN ISO 13927 (2015-08).
DIN EN ISO 7726:2021-03 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN 12560:1977 Laboratory glassware; offset oblique bore burette stopcocks with tail
DIN 47637:1986 Separable accessories for power cable for bushing with inside cone; U<(Index)m>= 36 kV, inside cone and fastening for the separable connector
DIN 1026-1:2009 Hot rolled steel channels - Part 1: Taper flange steel channels - Dimensions, masses and sectional properties
DIN 1026-1:2009-09 Hot rolled steel channels - Part 1: Taper flange steel channels - Dimensions, masses and sectional properties
DIN EN ISO 13927:2015 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015); German version EN ISO 13927:2015
DIN EN 13025-1:2006-01 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml; German version EN 13025-1:2005
DIN EN 13026:2001 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml; German version EN 13026:2001
DIN EN 13026:2001-04 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml; German version EN 13026:2001
DIN EN 13025-1:2006 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml; English version of DIN EN 13025-1:2006
DIN 47636-3:1986 Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing without mounting flange and eyelet-fastening for the separable connector
DIN EN 60264-3-5:2000 Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material (IEC 60264-3-5:1999); German version EN 60264-3-5:1999
DIN EN ISO 7726:2023-08 Ergonomics of the thermal environment - Instruments for measuring and monitoring physical quantities (ISO/DIS 7726:2023); German and English version prEN ISO 7726:2023 / Note: Date of issue 2023-06-30*Intended as replacement for DIN EN ISO 7726 (2021-03).
DIN EN 60264-4-2:2004-10 Packaging of winding wires - Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools (IEC 60264-4-2:1992 + A1:2003); German version EN 60264-4-2:1994 + A1:2004 / Note: DIN EN 60264-4-2 (1995-11) remai...
DIN 12353:1981 Laboratory ware made from fused quartz and fused silica; boiling flasks made from fused quartz; round bottom flasks, flat bottom flasks and conical flasks
DIN EN 60264-4-2:2004 Packaging of winding wires - Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools (IEC 60264-4-2:1992 + A1:2003); German version EN 60264-4-2:1994 + A1:2004
DIN 1026-1 Corrigendum 1:2002 Hot-rolled steel channels with taper flanges-Dimensions,mass and static parameters Corrigendum 1 to English version of DIN 1026-1:2000-03
DIN EN ISO 7726:2021 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN EN 60264-3-5:2000-05 Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material (IEC 60264-3-5:1999); German version EN 60264-3-5:1999
DIN EN 60617-8:1997 Graphical symbols for diagrams - Part 8: Measuring instruments, lamps and signalling devices (IEC 60617-8:1996); German version EN 60617-8:1996
DIN EN 60617-8:1997-08 Graphical symbols for diagrams - Part 8: Measuring instruments, lamps and signalling devices (IEC 60617-8:1996); German version EN 60617-8:1996
DIN 51900-1:2000 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Cone calorimeter

GB/T 15724.2-1995 Laboratory glassware--Conical beaker
GB/T 21297-2007 Laboratory glassware-Interchangeable conical ground joint
GB/T 11465-1989 Temperature profile for electronic measuring instruments
GB 11465-1989 Thermal Profiles for Electronic Measuring Instruments
GB/T 32707-2016 Safety requirements for laboratory instruments and equipments.Oxygen bomb calorimeter
GB/T 4728.8-2000 Graphical symbols for diagrams--Part 8: Measuring instruments,lamps and signalling devices
GB/T 4728.8-2008 Graphical symbols for diagrams.Part 8:Measuring instruments,lamps and signaling devices
GB/T 4728.8-2022 Graphical symbols for electrical diagrams—Part 8：Measuring instruments, lamps and signalling devices

RU-GOST R, Cone calorimeter

GOST 13376-1978 Conical heads and connections of vessels and apparatus. Series of angles at the vertex
GOST 4.136-1985 Product-quality index system. Thermophysical apparatus. Nomenclature of indices
GOST 25513-1982 Gear testers. Conventional designations. Terms and definitions
GOST 4.179-1985 System of product-quality indices. Machines and instruments for measuring forces and strains. Nomenclature of indices
GOST R 8.778-2011 State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Cone calorimeter

GB/T 34749-2017 Fire-resistance tests for wood and wood composite material—Cone calorimeter method

Japanese Industrial Standards Committee (JISC), Cone calorimeter

JIS A 1316:2022 Test method using cone calorimeter measuring heat release rate and smoke production rate for building materials
JIS B 1757-2:2010 Evaluation of instruments for the measurement of individual gears -- Part 2: Tooth form measurement using sphere or cylinder artifacts
JIS B 1757-1:2012 Evaluation of instruments for the measurement of individual gears -- Part 1: Method by gear shape artifacts
JIS B 1757-4:2013 Evaluation of instruments for the measurement of individual gears.Part 4: Pitch measurement using sphere artifacts

HU-MSZT, Cone calorimeter

Professional Standard - Light Industry, Cone calorimeter

QB 1504-1992 Interchangeable conical frosted joints for laboratory glass instruments

American Society for Testing and Materials (ASTM), Cone calorimeter

ASTM E3367-23 Standard Test Method for Determining the Combustion Behavior of Layered Assemblies using a Cone Calorimeter
ASTM E2102-08 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-11a Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-21 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-00 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-15 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-13 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-14 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-17 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-11 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E511-07(2020) Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
ASTM E2102-04a Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-04 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-09 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E1740-07 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E1740-07a Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E1740-02 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E1740-01 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E1740-00 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM C1667-09 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM C1667-07 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM D6616-20 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
ASTM D6616-20a Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
ASTM D4683-04 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator
ASTM D6616-21 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 ��C
ASTM D6616-17 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100&x2009;&xb0;C

未注明发布机构, Cone calorimeter

BS ISO 5660-1:2015+A1:2019(2021) Reaction - to - fire tests — Heat release, smoke production and mass loss rate Part 1 : Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
BS 4484-1:1969(2010) Specification for Measuring instruments for constructional works — Part 1 : Metric graduation and figuring of instruments for linear measurement
BS EN ISO 7726:2001(2002) Ergonomics of the thermal environment — Instruments for measuring physical quantities
BS EN 60617-8:1996(1998)*IEC 617-8:1996 Graphical symbols for diagrams — Part 8 : Measuring instruments, lamps and signalling devices

International Organization for Standardization (ISO), Cone calorimeter

ISO/FDIS 23948:2011 Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
ISO 23948:2011 Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
ISO/DIS 23948 Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
ISO 13927:2001 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector
ISO 13927:2015 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector
ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
ISO/PRF 13927:2023 Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
ISO 13927:2023 Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
ISO 5660-1:2002 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method)
ISO 5660-1:2015 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
ISO 5660-1:1993 Fire tests; reaction to fire; part 1: rate of heat release from building products (cone calorimeter method)
ISO/DIS 7726 Ergonomics of the thermal environment — Instruments for measuring and monitoring physical quantities
ISO 10193:2000 General use light gauge metal containers - Nominal filling volumes of round cylindrical and tapered containers of up to 40000 ml
ISO 5660-1:1993/Cor 1:1993 Fire tests; reaction to fire; part 1: rate of heat release from building products (cone calorimeter method); technical corrigendum 1
ISO 23948:2023 Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
ISO 5660-1:2015/Amd 1:2019 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) — Amendment 1
ISO 3150:1975 Radiators, convectors and similar appliances; Calculation of thermal output and presentation of results
ISO/TS 5660-5:2020 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 5: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen at
ISO 11944:1993 Round general use light gauge metal containers — Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity

CZ-CSN, Cone calorimeter

CSN 01 3135-1983 Technical drawings. Dimensioning and tolerancing cones
CSN ISO 7726:1993 Thermal environments. Instruments and methods for measuring physical quantities
CSN 30 3722-1989 5° tapered rims for commercial ve-hicles. Nominal diameter code 15, 20 and 24. Mandrels, valve slots and check gages. Dimensions

Taiwan Provincial Standard of the People's Republic of China, Cone calorimeter

CNS 14705-2007 Method of test for heat release rate for building materials - Cone calorimeter method
CNS 14705-2002 Method of test for heat release rate for building materials

Korean Agency for Technology and Standards (KATS), Cone calorimeter

KS L 2320-2006 Interchangeable conical glass ground joints
KS M ISO 13927:2004 Plastics-Simple heat release test using a conicalradiant heater and a thermopile detector
KS M ISO 13927-2016(2021) Plastics－Simple heat release test using a conicalradiant heater and a thermopile detector
KS M ISO 13927:2016 Plastics－Simple heat release test using a conicalradiant heater and a thermopile detector
KS D ISO 10193:2004 General use light gauge metal containers－Nominal filling volumes of round cylindrical and tapered containers of up to 40 000 mL
KS F ISO 5660-1:2008 Reaction-to-fire tests－Heat release, smoke production and mass loss rate－Part 1：Heat release rate(cone calorimeter method)
KS F ISO 5660-1:2018 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate(cone calorimeter method) and smoke production rate(dynamic measurement)
KS F ISO 5660-1:2021 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate(cone calorimeter method) and smoke production rate(dynamic measurement)
KS C IEC 60264-3-5-2004(2009) Packaging of winding wires－Part 3－5：Taper barrelled delivery spools－Specification for spool containers made from thermoplastic material
KS X IEC 60617-8:2003 Graphical symbols for diagrams-Part 8:Measuring instruments, lamps and signalling devices
KS X IEC 60617-8:2013 Graphical symbols for diagrams－Part 8：Measuring instruments, lamps and signalling devices
KS C IEC 60264-4-2:2004 Packaging of winding wires-Part 4:Methods of test-Section 2:Containers made from thermoplastic material for taper barrelled delivery spools
KS C IEC 60264-4-2-2004(2009) Packaging of winding wires－Part 4：Methods of test－Section 2：Containers made from thermoplastic material for taper barrelled delivery spools

BE-NBN, Cone calorimeter

NBN-EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)

PL-PKN, Cone calorimeter

PN E01213-1969 Elec?rical measuring instruments Graphical symbols
PN M53406-1974 Measuring instrumen?s Gauges ?or me?ric and trapezoidal screw- -thread cutting tools
PN E01200-08-1992 Graphical symbols for diagrams Measuring instruments lamps and signalling devices

Association Francaise de Normalisation, Cone calorimeter

NF T51-831*NF EN ISO 13927:2015 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector
NF P92-190-1*NF ISO 5660-1:2015 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
NF T51-831:2003 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector.
NF ISO 5660-1/A1:2020 Essais de réaction au feu - Débit calorifique, taux de dégagement de fumée et taux de perte de masse - Partie 1 : débit calorifique (méthode au calorimètre à cône) et taux de dégagement de fumée (mesurage dynamique) - Amendement 1
NF C42-123:1997 Electrical measuring instruments - Identification of thermocouples
NF P92-190-1/A1*NF ISO 5660-1/A1:2020 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1 : heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) - Amendment 1
NF X35-202*NF EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities
NF ISO 5660-1:2015 Essais de réaction au feu - Débit calorifique, taux de dégagement de fumée et taux de perte de masse - Partie 1 : débit calorifique (méthode au calorimètre à cône) et taux de dégagement de fumée (mesure dynamique)
NF E38-200:1987 Heat pumps and heat exchangers. Devices for the recovery in the form of hot water of the energy coming from refrigerating equipment (so called "heat recuperators").
NF H31-401*NF EN 13026:2001 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml
NF H31-400-1*NF EN 13025-1:2006 Packaging - Light gauge metal containers - Part 1 : nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml
XP P92-190-5*XP ISO/TS 5660-5:2020 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 5 : heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
NF C03-208:1997 Graphical symbols for diagrams. Part 8 : measuring instruments, lamps and signalling devices.
NF C31-093-5:1997 PACKAGING OF WINDING WIRES. PART 3 : TAPER BARRELLED DELIVERY SPOOLS. SECTION 5 : SPECIFICATION FOR SPOOL CONTAINERS MADE FROM THERMOPLASTIC MATERIAL. (EUROPEAN STANDARD EN 60 264-3-5).
NF EN 16313:2013 Raccords pour appareils de chauffage et de refroidissement - Raccords démontables à filetage extérieur cylindrique G 3/4 A et cône intérieur
XP ISO/TS 5660-5:2020 Essais de réaction au feu - Débit calorifique, taux de dégagement de fumée et taux de perte de masse - Partie 5 : débit calorifique (méthode au calorimètre à cône) et taux de dégagement de fumée (mesurage dynamique) dans des atmosphères pau...
NF C31-094-2/A1*NF EN 60264-4-2/A1:2004 Packaging of winding wires - Part 4-2 : methods of test - Containers made from thermoplastic material for taper barrelled delivery spools
NF EN 60264-3-5:2001 Conditionnement des fils de bobinage - Partie 3-5 : bobines de livraison à fût de forme conique - Spécification pour les conteneurs de bobine faits de matériau thermoplastique
NF EN 60264-4-2/A1:2004 Conditionnement des fils de bobinage - Partie 4-2 : méthodes d'essai - Conteneurs faits de matériau thermoplastique pour bobines de livraison à fût de forme conique
NF EN 60264-4-2:1995 Conditionnement des fils de bobinage - Partie 4 : méthodes d'essai section 2 : conteneurs faits de matériau thermoplastique pour bobines de livraison à fût de forme conique.
NF E04-202-4:1996 Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 4 : heat equipment.

ANSI - American National Standards Institute, Cone calorimeter

N15.54-1988 Instrumentation - Radiometric Calorimeters Measurement Control Program (INMM)

CEN - European Committee for Standardization, Cone calorimeter

EN ISO 13927:2003 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector

KR-KS, Cone calorimeter

KS M ISO 13927-2016 Plastics－Simple heat release test using a conicalradiant heater and a thermopile detector
KS F ISO 5660-1-2021 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate(cone calorimeter method) and smoke production rate(dynamic measurement)
KS F ISO 5660-1-2018 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate(cone calorimeter method) and smoke production rate(dynamic measurement)
KS B ISO 9358-2023 Optics and optical instruments — Veiling glare of image forming systems — Definitions and methods of measurement

ES-UNE, Cone calorimeter

UNE-EN ISO 13927:2016 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015)

American National Standards Institute （ANSI), Cone calorimeter

ANSI/ASTM D6113:2009 Test Method for Using a Cone Calorimeter to Determine Fire-test-response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ANSI/ASTM D6113:2010 Test Method for Using a Cone Calorimeter to Determine Fire-test-response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ANSI/ASTM E2102:2013 Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ANSI/ASTM E1740:2010 Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter

GOSTR, Cone calorimeter

GOST 34233.2-2017 Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindric and conic shells, convex and flat bottoms and covers
GOST R ISO 5660-1-2020 Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Part 1. Determination of heat release rate by using cone calorimeter method and of smoke production rate by dynamic measurements

Lithuanian Standards Office , Cone calorimeter

LST EN ISO 13927:2004 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2001)
LST EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)
LST EN 13026-2002 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml
LST EN 13025-1-2005 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml
LST EN 60264-3-5-2000 Packaging of winding wires. Part 3-5: Taper barrelled delivery spools. Specification for spool containers made from thermoplastic material (IEC 60264-3-5:1999)

RO-ASRO, Cone calorimeter

STAS 819-1988 Tapes for tool shanks TAPER GAUGES FOR METERIC AND MORSE TAPERS CHECKING UP Shapes and dimensions
STAS 11071/21-1990 Hierarchy of measuring instruments. Block diagram of hierarchy of measuring instrument for thermal neutrons flux density
STAS SR EN 27726-1996 Thermal environments - Instruments and methods for measuring physical quantities
STAS SR ISO 1880:1994 Instruments for the measurement of surface roughness by the profile method - Contact (stylus) instruments of progressive profile transformation - Profile recording instruments.
STAS 7601-1966

European Committee for Standardization (CEN), Cone calorimeter

EN ISO 13927:2015 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector
prEN ISO 13927 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO/DIS 13927:2022)
EN ISO 13927:2023 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2023)
EN 13026:2001 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml
EN 13025-1:2005 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
EN ISO 7726:2001 Ergonomics of the Thermal Environment - Instruments for Measuring Physical Quantities ISO 7726:1998; Supersedes EN 27726:1993
EN 27726:1993 Thermal Environments - Instruments and Methods for Measuring Physical Quantities (ISO 7726 : 1985) Superseded by EN ISO 7726:2001

YU-JUS, Cone calorimeter

JUS M.A1.034-1980 Instruments for the measurement of surface roughness by tne profil method-contact (stylus) instrument* of profile transformation - Profile reoording instruments
JUS N.A3.008-1987 Graphical symbols in electrotechnical diagrams. Measuring jnstruments, lamps and signalling devices

Society of Automotive Engineers (SAE), Cone calorimeter

SAE AIR1168/5-1990 Aerothermodynamic Test Instrumentation and Measurement
SAE AIR1168/5A-2011 Aerothermodynamic Test Instrumentation and Measurement
SAE AIR1168/5-2006 Aerothermodynamic Test Instrumentation and Measurement

AT-ON, Cone calorimeter

ONORM EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)
OENORM EN ISO 7726:2021 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)
ONORM E 1008-1987 Graphical symbols jor diagrams; symbols for measuring Instruments, lamps and signalling devices

国家市场监督管理总局、中国国家标准化管理委员会, Cone calorimeter

GB/T 40233-2021 Ergonomics of the thermal environment—Instruments for measuring physical quantities

Association of German Mechanical Engineers, Cone calorimeter

VDI/VDE 2615-2006 Surface roughness measurement of cylindrical gears and bevel gears by means on stylus-type instruments
VDI/VDE 2612 Blatt 5-2015 Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments

AIA/NAS - Aerospace Industries Association of America Inc., Cone calorimeter

NASM33750-1998 Recess - Dovetail Slot and Conical Dovetail Slot@ Dimensions of Recess@ Gage and Driver for
NASM33750-2016 RECESS@ DOVETAIL SLOT AND CONICAL DOVETAIL SLOT@ DIMENSIONS OF RECESS@ GAGE AND DRIVER FOR (Rev 2)
NASM33750-2011 RECESS@ DOVETAIL SLOT AND CONICAL DOVETAIL SLOT@ DIMENSIONS OF RECESS@ GAGE AND DRIVER FOR (Rev 1)

AENOR, Cone calorimeter

UNE-EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities. (ISO 7726:1998)
UNE-EN 13025-1:2006 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml
UNE-EN 60264-3-5:2000 PACKAGING OF WINDING WIRES -- PART 3-5: TAPER BARRELLED DELIVERY SPOOLS - SPECIFICATION FOR SPOOL CONTAINERS MADE FROM THERMOPLASTIC MATERIAL

Professional Standard - Machinery, Cone calorimeter

JB/T 8135.35-2013 Packaging of winding wires.Part 35:Taper barrelled delivery spools.Specification for spool containers made from thermoplastic material
JB/T 8135.42-2013 Packaging of winding wires.Part 42:Methods of test.containers made from thermoplastic materials for taper barrelled delivery spools

Aerospace Industries Association/ANSI Aerospace Standards, Cone calorimeter

AIA/NAS NASM33750-2011 RECESS, DOVETAIL SLOT AND CONICAL DOVETAIL SLOT, DIMENSIONS OF RECESS, GAGE AND DRIVER FOR (Rev 1)

IN-BIS, Cone calorimeter

IS 2032 Pt.10-1969

机械工业部, Cone calorimeter

JB/T 8135.9-1995 Packaging of Winding Wire Part 3: Conical Delivery Coils Section 5: Coil Containers of Thermoplastic Materials
JB/T 8135.11-1995 Packaging of winding wires Part 4: Test methods Section 2: Containers of thermoplastic materials for conical delivery reels

TR-TSE, Cone calorimeter

TS 633-EK 1-1980 GRAPHICAL SYMBOLS - PART 4 . MEASURING INSTRUMENTS AND ELECTRIC CLOCKS - SUPPLEMENT 1

International Electrotechnical Commission (IEC), Cone calorimeter

IEC 60617-8:1983 Graphical symbols for diagrams. Part 8: Measuring instruments, lamps and signalling devices
IEC 60617 database Graphical symbols for diagrams--Part 8:Measuring instruments,lamps and signaling devices

CENELEC - European Committee for Electrotechnical Standardization, Cone calorimeter

EN 60617-8:1996 Graphical Symbols for Diagrams Part 8: Measuring Instruments@ Lamps and Signalling Devices

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Cone calorimeter

ASHRAE 4301-1999 Measurement of Frost Characteristics on Heat Exchanger Fins Part 1: Test Facility and Instrumentation (RP-824)

IT-UNI, Cone calorimeter

UNI 2325-1943

BELST, Cone calorimeter

STB GOST R 8.619-2009 State system for ensuring the uniformity of measurements. Thermographic instruments. Verification procedure

The American Road & Transportation Builders Association, Cone calorimeter

AASHTO T 246-2010 Standard Method of Test for Resistance to Deformation and Cohesion of Hot Mix Asphalt (HMA) by Means of Hveem Apparatus

AASHTO - American Association of State Highway and Transportation Officials, Cone calorimeter

T 246-2010 Standard Method of Test for Resistance to Deformation and Cohesion of Hot Mix Asphalt (HMA) by Means of Hveem Apparatus

NZ-SNZ, Cone calorimeter

AS/NZS 1102.108:1997 Graphical Symbols for Electrotechnical Documentation Part 108: Measuring Instruments, Lamps and Signalling Devices

Standard Association of Australia （SAA）, Cone calorimeter

AS 3580.9.8:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 continuous direct mass method using a tapered element oscillating microbalance analyser

NL-NEN, Cone calorimeter

NEN 2809-1990 Terms for Standard measures, gauges and measuring instruments for lineair measures, angles, form, location and surface roughness

SE-SIS, Cone calorimeter

SIS SS 2532-1985 Road vehicles - Coupling balls with 60 mm diameter with tapered connection for towed vehicles with a total weight up to 6 tons - Dimensions and strength requirements