ZH
RU
ES

micro cone calorimetry

micro cone calorimetry, Total:144 items.

In the international standard classification, micro cone calorimetry involves: Thermodynamics and temperature measurements, Protection against fire, Iron and steel products, Cans. Tins. Tubes, Internal combustion engines for road vehicles, Optoelectronics. Laser equipment, Ceramics, Analytical chemistry, Barrels. Drums. Canisters, Insulating materials, Fibre optic communications, Air quality, Semiconductor devices, Electromechanical components for electronic and telecommunications equipment.

British Standards Institution (BSI), micro cone calorimetry

DD 246-1999 Recommendations for the use of the cone calorimeter
PD ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
BS PD ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
BS ISO 5660-1:2015+A1:2019 Reaction-to-fire tests. Heat release, smoke production and mass loss rate - Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
BS ISO 6550-3:2013 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M10 glow-plugs
BS ISO 5660-1:2015 Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
PD ISO/TS 5660-5:2020 Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
BS AU 262-1:1995 Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M14 x 1, 25 glow-plugs
BS AU 262-2:1995 Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M12 x 1.25 glow-plugs
23/30427576 DC BS ISO 23948. Plastics. Intumescence properties of PVC materials and products. Test method for the measurement of expansion with the cone calorimeter
BS ISO 17447-1:2022 Tracked Changes. Road Vehicles. Glow plugs with conical seating and their cylinder head housing. Basic characteristics and dimensions for metal-sheath-type glow plugs
BS EN 62047-14:2012 Semiconductor devices. Micro-electromechanical devices. Forming limit measuring method of metallic film materials
BS EN 62047-17:2015 Semiconductor devices. Micro-electromechanical devices. Bulge test method for measuring mechanical properties of thin films
20/30379336 DC BS ISO 17447-1. Road Vehicles. Glow-plugs with conical seating and their cylinder head housing. Part 1. Basic characteristics and dimensions for metal-sheath-type glow-plugs

German Institute for Standardization, micro cone calorimetry

DIN EN 10024:1995-05 Hot-rolled taper flange I sections - Tolerances on shape and dimensions; German version EN 10024:1995
DIN EN 10024:1995 Hot-rolled taper flange I sections - Tolerances on shape and dimensions; German version EN 10024:1995
DIN 1026-1:2009 Hot rolled steel channels - Part 1: Taper flange steel channels - Dimensions, masses and sectional properties
DIN 1026-1:2009-09 Hot rolled steel channels - Part 1: Taper flange steel channels - Dimensions, masses and sectional properties
DIN EN 13026:2001 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml; German version EN 13026:2001
DIN EN 13026:2001-04 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml; German version EN 13026:2001
DIN EN 13025-1:2006-01 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml; German version EN 13025-1:2005
DIN 6885-2:2021 Drive type fastenings without taper action, parallel keys, keyways - Deep pattern for machine tools - Part 2: Dimensions, tolerances, mass
DIN EN 13025-1:2006 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml; English version of DIN EN 13025-1:2006
DIN 1026-1 Corrigendum 1:2002 Hot-rolled steel channels with taper flanges-Dimensions,mass and static parameters Corrigendum 1 to English version of DIN 1026-1:2000-03

HU-MSZT, micro cone calorimetry

MSZ 4348-1981

Danish Standards Foundation, micro cone calorimetry

DS/EN 10024:1996 Hot rolled taper flange I sections - Tolerances on shape and dimensions
DS/ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
DS/ISO 5660-1:2003 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method)
DS/EN 13026:2001 Packaging - Light gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml
DS/EN 13025-1:2006 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml

Lithuanian Standards Office , micro cone calorimetry

LST EN 10024-2000 Hot rolled taper flange I sections - Tolerances on shape and dimensions
LST EN 13026-2002 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml
LST EN 13025-1-2005 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml

海关总署, micro cone calorimetry

SN/T 5240-2020 Cone calorimeter method for determination of heat release rate of imported and exported textiles

International Organization for Standardization (ISO), micro cone calorimetry

ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
ISO 5660-1:2002 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method)
ISO 5660-1:2015 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
ISO 5660-1:1993 Fire tests; reaction to fire; part 1: rate of heat release from building products (cone calorimeter method)
ISO 6550-3:2002 Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 3: M10 glow-plugs
ISO 6550-3:2009 Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 3: M10 glow-plugs
ISO 6550-3:2013 Road vehicles.Sheath-type glow-plugs with conical seating and their cylinder head housing.Part 3: M10 glow-plugs
ISO 6550-3:1996 Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 3: M10 glow plugs
ISO/FDIS 23948:2011 Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
ISO 23948:2011 Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
ISO 5660-1:1993/Cor 1:1993 Fire tests; reaction to fire; part 1: rate of heat release from building products (cone calorimeter method); technical corrigendum 1
ISO/DIS 23948 Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
ISO 23948:2023 Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
ISO 5660-1:2015/Amd 1:2019 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) — Amendment 1
ISO 17447-1:2022 Road Vehicles — Glow plugs with conical seating and their cylinder head housing — Part 1: Basic characteristics and dimensions for metal-sheath-type glow plugs
ISO 17447-1:2015 Road Vehicles - Glow-plugs with conical seating and their cylinder head housing - Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs
ISO 17447-2:2015 Road Vehicles - Glow-plugs with conical seating and their cylinder head housing - Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs
ISO/TS 5660-5:2020 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 5: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen at

Korean Agency for Technology and Standards (KATS), micro cone calorimetry

KS D ISO 10193:2004 General use light gauge metal containers－Nominal filling volumes of round cylindrical and tapered containers of up to 40 000 mL
KS D 3502-2013 Dimensions, mass and permissible variations of hot rolled steel sections
KS D 3502-2015 Dimensions, mass and permissible variations of hot rolled steel sections
KS F ISO 5660-1:2008 Reaction-to-fire tests－Heat release, smoke production and mass loss rate－Part 1：Heat release rate(cone calorimeter method)
KS R ISO 6550-3:2013 Road vehicles-Sheath-type glow-plugs with conical seating and their cylinder head housing-Part 3:M10 glow-plugs
KS R ISO 6550-3:2016 Road vehicles－Sheath-type glow-plugs with conical seating and their cylinder head housing－Part 3：M10 glow-plugs
KS R ISO 6550-1:2002 Road vehicles-Sheath -type glow-plugs with conicalseating and their cylinder head housing-Part 1:M14×1.25 glow-plug
KS R ISO 6550-2:2002 Road vehicles-Sheath-type glow -plugs with conicalseating and their cylinder head housing-Part 2:M12×1.25 glow-plugs
KS F ISO 5660-1:2018 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate(cone calorimeter method) and smoke production rate(dynamic measurement)
KS F ISO 5660-1:2021 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate(cone calorimeter method) and smoke production rate(dynamic measurement)
KS D 3502-2021 Dimensions, mass and permissible variations of hot rolled steel sections
KS R ISO 6550-2:2016 Road vehicles－Sheath-type glow -plugs with conicalseating and their cylinder head housing－Part 2：M12×1.25 glow-plugs
KS R ISO 6550-1:2016 Road vehicles－Sheath -type glow-plugs with conicalseating and their cylinder head housing－Part 1：M14×1.25 glow-plug
KS M ISO 11093-8:2008 Paper and board-Testing of cores-Part 8:Determination of natural frequency and flexural modulus by experimental modal analysis
KS M 1995-2021 Determination of emissions of organic compounds from plastic products by thermal desorption and gas chromatography using mass spectrometry — Micro-scale chamber method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, micro cone calorimetry

GB/T 34749-2017 Fire-resistance tests for wood and wood composite material—Cone calorimeter method

Association Francaise de Normalisation, micro cone calorimetry

NF P92-190-1*NF ISO 5660-1:2015 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
NF EN 10279:2000 Profilés en U en acier laminés à chaud - Tolérances sur la forme, les dimensions et la masse
NF ISO 5660-1:2015 Essais de réaction au feu - Débit calorifique, taux de dégagement de fumée et taux de perte de masse - Partie 1 : débit calorifique (méthode au calorimètre à cône) et taux de dégagement de fumée (mesure dynamique)
NF P92-190-1/A1*NF ISO 5660-1/A1:2020 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1 : heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) - Amendment 1
NF R15-703-2:1996 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 2 : M12 X 1,25 glow-plugs.
NF R15-703-1:1996 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 1 : M14 X 1,25 glow-plugs.
NF H31-400-1*NF EN 13025-1:2006 Packaging - Light gauge metal containers - Part 1 : nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml
XP P92-190-5*XP ISO/TS 5660-5:2020 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 5 : heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
NF ISO 5660-1/A1:2020 Essais de réaction au feu - Débit calorifique, taux de dégagement de fumée et taux de perte de masse - Partie 1 : débit calorifique (méthode au calorimètre à cône) et taux de dégagement de fumée (mesurage dynamique) - Amendement 1
NF U42-003-1:1990 Fertilizers with declared micronutrient(s) content(s) for leaf spraying. Part 1 : micronutrients under mineral chemical combination(s) form, exclusively. Types and specifications.
XP ISO/TS 5660-5:2020 Essais de réaction au feu - Débit calorifique, taux de dégagement de fumée et taux de perte de masse - Partie 5 : débit calorifique (méthode au calorimètre à cône) et taux de dégagement de fumée (mesurage dynamique) dans des atmosphères pau...

Japanese Industrial Standards Committee (JISC), micro cone calorimetry

JIS A 1316:2022 Test method using cone calorimeter measuring heat release rate and smoke production rate for building materials
JIS G 3192:1994 Dimensions, mass and permissible variations of hot rolled steel sections
JIS R 1672:2006 Determination of specific heat of fiber-reinforced ceramics composite by differential scanning calorimetry methods
JIS G 3192:2021 Dimensions, shape, mass and permissible variations of hot rolled steel sections

未注明发布机构, micro cone calorimetry

BS ISO 5660-1:2015+A1:2019(2021) Reaction - to - fire tests — Heat release, smoke production and mass loss rate Part 1 : Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)

American Society for Testing and Materials (ASTM), micro cone calorimetry

ASTM C1130-07 Standard Practice for Calibrating Thin Heat Flux Transducers
ASTM C1130-07(2012) Standard Practice for Calibrating Thin Heat Flux Transducers
ASTM E3367-23 Standard Test Method for Determining the Combustion Behavior of Layered Assemblies using a Cone Calorimeter
ASTM E2102-08 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-11a Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-21 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-00 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-15 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-13 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-14 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-17 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2102-11 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E1740-07 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E1740-07a Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E1740-02 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E1740-01 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E1740-00 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM D6113-03 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D6113-10 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D6113-11 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM E1740-20a Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM E1740-09 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E1740-20 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM E1740-22 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM E1740-15 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM D7309-13 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM E1740-10 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM D6113-02 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D6113-99 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D6113-09 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D6113-16 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D6113-21 Standard Test Method for Using Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

KR-KS, micro cone calorimetry

KS F ISO 5660-1-2021 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate(cone calorimeter method) and smoke production rate(dynamic measurement)
KS F ISO 5660-1-2018 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate(cone calorimeter method) and smoke production rate(dynamic measurement)

RU-GOST R, micro cone calorimetry

GOST 5.2105-1973 Laser ellipsometric microscope LEM-2. Quality requirements of sertified products

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, micro cone calorimetry

GB/T 9946-1988 Dimensions,shape,weight and tolerances for hot-rolled L-sectional steel

Taiwan Provincial Standard of the People's Republic of China, micro cone calorimetry

CNS 1490-2006 Dimensions, mass and permissible variations of hot rolled steel sections
CNS 1490-2000 Dimensions,mass and permissible variations of hot rolled steel sections

GOSTR, micro cone calorimetry

GOST R ISO 5660-1-2020 Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Part 1. Determination of heat release rate by using cone calorimeter method and of smoke production rate by dynamic measurements

European Committee for Standardization (CEN), micro cone calorimetry

EN 13026:2001 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml
EN 13025-1:2005 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml

Group Standards of the People's Republic of China, micro cone calorimetry

T/CCMI 11-2021 Machining Allowance and Tolerance of Large Hot Rolled Ring Forgings

Military Standards (MIL-STD), micro cone calorimetry

DOD A-A-51629 A-1987 CUP, MICRO SAMPLE, AUTOMATED ANALYSIS (CONICAL, POLYSTYRENE, DISPOSABLE) [Use In Lieu Of: DOD A-A-0051629]

American National Standards Institute （ANSI), micro cone calorimetry

ANSI/ASTM E2102:2013 Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ANSI/ASTM E1740:2010 Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ANSI/ASTM D6113:2009 Test Method for Using a Cone Calorimeter to Determine Fire-test-response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ANSI/ASTM D6113:2010 Test Method for Using a Cone Calorimeter to Determine Fire-test-response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ANSI/ASTM D6113:2011 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ANSI/ASTM E1740:2015 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ANSI/ASTM D6113:2003 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ANSI/ASTM D6113:2002 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

国家质量监督检验检疫总局, micro cone calorimetry

SN/T 4879-2017 Test methods for combustion properties of polymers and their composites Microcalorimetry

AENOR, micro cone calorimetry

UNE-EN 13025-1:2006 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml

Standard Association of Australia （SAA）, micro cone calorimetry

AS 3580.9.8:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
AS/NZS 3580.9.13:2013
AS 3580.9.8:2001 Methods for sampling and analysis of ambient air Method 9.8: Determination of suspended particulate matter--PM continuous direct mass method using a tapered element oscillating microbalance analyser
AS/NZS 3580.9.13:2022 Methods for sampling and analysis of ambient air, Method 9.13: Determination of suspended particulate matter — PM2.5 continuous direct mass method using a tapered element oscillating microbalance monitor
AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser

IT-UNI, micro cone calorimetry

UNI 4049-1958

Professional Standard - Aviation, micro cone calorimetry

HB 5353.4-2004 Test method for properties of investment casting ceramic core-Part 4:Determination of thermal deformation value