ZH
RU
ES
Calorific value of combustion plastic
Calorific value of combustion plastic, Total:498 items.
In the international standard classification, Calorific value of combustion plastic involves: Fuels, Protection against fire, Construction materials, Plastics, Reinforced plastics, Analytical chemistry, Rubber and plastics products, Elements of buildings, Pipeline components and pipelines, Cellular materials, Wastes, Petroleum products in general, Thermodynamics and temperature measurements, Electrical engineering in general, Domestic, commercial and industrial heating appliances, Burners. Boilers, Equipment for the chemical industry, Installations in buildings, Heat recovery. Thermal insulation, Materials for aerospace construction, Products of the chemical industry, Crude petroleum, Coals, Electrical accessories, Insulating materials, Industrial furnaces, Nuclear energy engineering, Fluid storage devices, Products of the textile industry, Electrical wires and cables, Road vehicle systems, Rubber, Internal combustion engines for road vehicles, Natural gas, TESTING.
Professional Standard - Commodity Inspection, Calorific value of combustion plastic
- SN/T 4112-2015 Determination of combustion calorific value of polypropylene plastic - Oxygen bomb calorimetry
- SN/T 3101-2012 Estimation of net and gross heat of combustion of burner and diesel fuels
- SN/T 3125-2012 Determination of heat of combustion of liquid hydrocarbon fuels.Bomb calorimeter
Professional Standard - Railway, Calorific value of combustion plastic
- TB/T 2981-2000 Determination of the highest calorific value of material combustion
- TB/T 2701-1996 Determination of Combustion Oxygen Index of Plastics
国家质量监督检验检疫总局, Calorific value of combustion plastic
- SN/T 4942-2017 Determination of the combustion heat value of biofuels Oxygen bomb calorimetry
Association Francaise de Normalisation, Calorific value of combustion plastic
- NF T51-074:1986 Plastics. Fire behaviour. Hot wire test.
- NF P92-521*NF EN ISO 1716:2018 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
- NF P92-521:2013 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
- NF X34-208:2011 Solid recovered fuels - Determination of calorific value.
- NF X34-208*NF EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value
- NF X34-104*NF EN ISO 18125:2017 Solid biofuels - Determination of calorific value
- NF EN ISO 21654:2021 Combustibles solides de récupération - Détermination du pouvoir calorifique
- NF EN ISO 18125:2017 Biocombustibles solides - Détermination du pouvoir calorifique
- NF M07-030:1996 Combustibles liquides pétroliers - Détermination du pouvoir calorifique
- NF T51-086*NF EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
- NF T51-075:1986 Plastics. Fire behaviour. Needle burner test.
- NF M03-005:2011 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value.
- NF D32-307*NF EN 13240:2002 Roomheaters fired by solid fuel - Requirements and test methods
- NF D32-307/A2*NF EN 13240/A2:2005 Roomheaters fired by solid fuel - Requirements and test methods
- NF T54-412*NF EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment
- NF EN 61100:1992 Classification des isolants liquides selon le point de feu et le pouvoir calorifique inférieur
- NF EN 746-2:2010 Équipements thermiques industriels - Partie 2 : prescriptions de sécurité concernant la combustion et la manutention des combustibles
- NF T51-084-1*NF EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1 : general guidance
- NF T51-071-1*NF EN ISO 4589-1:2017 Plastics - Determination of burning behaviour by oxygen index - Part 1 : general requirements
- NF T51-071-3*NF EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3 : Elevated-temperature test
- NF D35-337:2001 Heating - Gas - Liquid fuel, solid fuel - Gas-fired central heating boilers of heat output not exceeding 70 kW designed to be connected to a mechanical installation for the evacuation of the combustion products.
- NF T51-071-2/A1:2006 Plastics - Determination of burning behaviour by oxygen index - Part 2 : ambient-temperature test.
- NF EN ISO 4589-1:2017 Plastiques - Détermination du comportement au feu au moyen de l'indice d'oxygène - Partie 1 : exigences générales
- NF EN ISO 4589-3:2017 Plastiques - Détermination du comportement au feu au moyen de l'indice d'oxygène - Partie 3 : essai à haute température
- NF E32-200-2*NF EN 746-2:2010 Industrial thermoprocessing equipment - Part 2 : safety requirements for combustion and fuel handling systems.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Calorific value of combustion plastic
- GB/T 14402-1993 Test method of heat of combustion for building materials
- GB/T 14402-2007 Reaction to fire tests for building materials and products.Determination of the heat of combustion
- GB/T 2407-1980 Plastics--Combustion performance test--Blazing rod method
- GB/T 8333-2022 Plastic—Test method for flammability of rigid cellular plastic—Virtical burning method
- GB/T 2407-2008 Plastics.Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
- GB/T 8332-1987 Test method for flammability of cellular plastics--Horizontal burning method
- GB/T 8332-2008 Test method for flammability of cellular plastic.Horizonal burning method
- GB/T 8333-1987 Test method for flammability of rigid cellular plastics--Vertical burning method
- GB/T 6011-1985 Test method for flammability characteristics of fiber-reinforced plastics--Incandescent rod method
- GB/T 6011-2005 Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method
- GB 6011-1985 Test method for flammability characteristics of fiber-reinforced plastics－Incandescent rod method
- GB/T 8333-2008 Test method for flammability of rigid cellular plastic.Virtical burning method
- GB/T 15907-1995 Rubber and plastics hoses--Method of test for flammability
- GB/T 9638-1988 Gravimetric determination of smoke particulates from combustion of plastic materials
- GB 2429-1988 Calculation method of net calorific value of aviation fuel
- GB/T 2429-1988 Aviation fuels--Calculation of net heat of combustion
- GB/T 8323-1987 Test method for flammability of plastics--Smoke density test
- GB/T 2406-1993 Plastics Determination of fammability by oxygen index
- GB 8323-1987 Test method for flammability of plastics－Smoke density test
- GB/T 9343-1988 Test method for flammability of plastics--Flash-ignition temperature and self-ignition temperature test
- GB/T 9343-2008 Test method for flammability of plastics.Determination of flash-ignition temperature and self-ignition temperature
- GB/T 14403-2014 Test method for combustion heat release of building materials
- GB/T 14403-1993 Test method of release heat by combustion for building materials
- GB/T 22472-2008 Tests for flammability of plastic materials for parts in devices and appliances
- GB/T 2408-2008 Plastics.Determination of burning characteristics.Horizontal and vertical test
- GB/T 2408-1996 Plastics--Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
- GB/T 4610-1984 Test for flammability of plastics--Ignition temperature test
- GB/T 11785-2005 Reaction to fire tests for floorings.Determination of the burning behaviour using a radiant heat source
- GB/T 8924-2005 Test method for flammability characteristics of fiber reinforced plastics-Oxygen index method
- GB/T 2406.1-2008 Plastics.Determination of burning behaviour by oxygen index.Part 1:Guidance
- GB/T 8924-1988 Test method for flammability characteristics of glass fiber reinforced plastics using the oxygen index method
- GB/T 2406.3-2022 Plastics—Determination of burning behaviour by oxygen index—Part 3: Elevated-temperature test
- GB/T 2406.2-2009 Plastics.Determination of burning behaviour by oxygen index.Part 2:Ambient-temperature test
- GB/T 25353-2010 Test method to determine the flammability and flame propagation characteristics of thermal/acoustic insulation materials
International Organization for Standardization (ISO), Calorific value of combustion plastic
- ISO/CD TS 23947-2.2 Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics
- ISO/TR 10840:1993 Plastics; burning behaviour; guidance for development and use of fire tests
- ISO/TR 10093:2017 Plastics - Fire tests - Standard ignition sources
- ISO 10093:1998 Plastics - Fire tests - Standard ignition sources
- ISO 10093:2020 Plastics - Fire tests - Standard ignition sources
- ISO/TR 10093:2018 Plastics - Fire tests - Standard ignition sources
- ISO/R 1326:1970 Plastics; Determination of flammability and burning rate of plastics in the form of film
- ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
- ISO 1716:2018 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
- ISO 10840:2003 Plastics - Guidance for the use of standard fire tests
- ISO 10840:2008 Plastics - Guidance for the use of standard fire tests
- ISO 10093:1994 Plastics - Fire tests - Standard ignition sources
- ISO/TR 10840:1993/Cor 1:1995 Plastics - Burning behaviour - Guidance for development and use of fire tests; Technical Corrigendum 1
- ISO 8328:1989 Plastics; amorphous thermoplastic moulding materials; determination of maximum reversion
- ISO 21654:2021 Solid recovered fuels - Determination of calorific value
- ISO 18125:2017 Solid biofuels - Determination of calorific value
- ISO 12992:1995 Plastics - Vertical flame spread determination for film and sheet
- ISO 1928:1976 Solid mineral fuels — Determination of gross calorific value by the calorimeter bomb method, and calculation of net calorific value
- ISO 25762:2009 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
- ISO 1928:1995 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value
- ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability
- ISO 8030:1995 Rubber and plastics hoses - Method of test for flammability
- ISO 1172:1975 Textile glass reinforced plastics; Determination of loss on ignition
- ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance
- ISO 10351:1992 Plastics; determination of the combustibility of specimens using a 125 mm flame source
- ISO 15791-1:2002 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance
- ISO 871:1996 Plastics - Determination of ignition temperature using a hot-air furnace
- ISO 4589-1:1996 Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance
- ISO 10093:1994/Cor 1:1995 Plastics - Fire tests - Standard ignition sources; Technical Corrigendum 1
- ISO 9772:2001 Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
- ISO 9772:2012 Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
- ISO 9772:2020 Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
- ISO 13229:2010 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value
- ISO 10774:1992 Solid fuelled heaters; test method for determining allowable clearances from combustible surfaces
- ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
- ISO 4589-2:1996 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
- ISO 4589-3:1996 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
- ISO 9773:1990 Plastics; determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source
- ISO 4589-1:2017 Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements
- ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
- ISO 181:1981 Plastics; Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
HU-MSZT, Calorific value of combustion plastic
AT-ON, Calorific value of combustion plastic
American Society for Testing and Materials (ASTM), Calorific value of combustion plastic
- ASTM D4868-00(2010) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
- ASTM D4529-01(2011) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338/D3338M-09(2014)e2 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D4529-01(2006) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D4529-95 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D4529-01 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338/D3338M-09 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D6446-01(2006) Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
- ASTM D4868-00 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
- ASTM D4868-90(1995)e1 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
- ASTM D4868-00(2005) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
- ASTM D5025-05 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D5025-20 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D5025-20a Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D5025-99 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D5025-11 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D5025-12 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D4868-17 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
- ASTM D5025-12e1 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D1405/D1405M-08(2013) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D7309-07a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-11 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-07 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D635-98 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D635-03 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D7309-13 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-21b Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM E1509-95(2000) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM E1509-22 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM D635-06 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D635-14 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D1405-01 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D1405-95a Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM E1509-04 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM D3338-92 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338/D3338M-20 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338/D3338M-20a Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D4529-17 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338/D3338M-09(2014)e1 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338-08 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D1405/D1405M-08 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM E1509-12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM D240-02(2007) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-92(1997)e2 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-00 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-02 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D7309-21a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-21 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-20 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-19 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-19a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D240-14 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-17 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM E1509-12(2017) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM D3338/D3338M-09(2014) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D240-87(1991)e1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-76 Standard Test Method for Heat Of Combustion Of Liquid Hydrocarbon Fuels By Bomb Calorimeter
- ASTM D240-87e1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-19 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D568-77 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Flexible Plastics in a Vertical Position
- ASTM D635-22 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D3338-05 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338-00 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338-95 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM E1602-01 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
- ASTM E1602-94 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
- ASTM E1602-03(2010)e1 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
- ASTM D6446-99 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
- ASTM D3338-04 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D6446-01 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
- ASTM D4809-09a Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D6890-21 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM E1602-03 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
- ASTM D635-10 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D4809-18 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D2843-10 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
- ASTM D2382-83 Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)
- ASTM D2382-76 Standard Test Method for Heat Of Combustion Of Hydrocarbon Fuels By Bomb Calorimeter (High-Precision Method)
- ASTM D4809-09ae1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D2382-88 Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)
- ASTM D4809-13 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D3588-98 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
- ASTM D3588-98(2003) Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
- ASTM D2843-19 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
- ASTM D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
- ASTM D7170-09 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oilsx2014;Fixed Range Injection Period, Constant Volume Combustion Chamber Method
- ASTM D7170-12 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oilsmdash;Fixed Range Injection Period, Constant Volume Combustion Chamber Method
- ASTM D4809-06 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D4809-00 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D4809-95 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D4809-09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D4809-00(2005) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D4891-89(2006) Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
- ASTM D4891-89(2001) Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
- ASTM D2843-22 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
- ASTM D6890-04 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM D5048-20 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D5048-03 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-18 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D5048-97 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-09 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-19 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-14 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D4891-89(1994)e1 Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
Danish Standards Foundation, Calorific value of combustion plastic
- DS/EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
- DS/EN 15400:2011 Solid recovered fuels - Determination of calorific value
- DS/ISO 21654:2021 Solid recovered fuels – Determination of calorific value
- DS/EN 14918:2010 Solid biofuels - Determination of calorific value
- DS/ISO 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
- DS/ISO 9772:2020 Cellular plastics – Determination of horizontal burning characteristics of small specimens subjected to a small flame
- DS/EN ISO 21654:2021 Solid recovered fuels – Determination of calorific value (ISO 21654:2021)
- DS/EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
- DS/EN 13240/A2:2004 Roomheaters fired by solid fuel - Requirements and test methods
- DS/EN 13240:2003 Roomheaters fired by solid fuel - Requirements and test methods
- DS/EN ISO 4589-1:1999 Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance
- DS/EN 746-2:2010 Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems
- DS/EN ISO 4589-3:1997 Plastics - Determination of burning behavior by oxygen index - Part 3: Elevated-temperature test
- DS/ISO 1928:1980 Solid mineral fuels. Determination of gross calorific value by the calorimeter bomb method, and calculation of net calorific value
- DS/ISO 4589-4:2021 Plastics – Determination of burning behaviour by oxygen index – Part 4: High gas velocity test
PL-PKN, Calorific value of combustion plastic
- PN C04062-1986 Petroleum products Determination of gross heat of combustion by bomb calorimeter and calculation of net heat of combustion, of li?uid fuels
- PN C96002-1986 Gas fuels Messuring of gross and net calorific values with an calorimeter
- PN-EN ISO 18125-2017-07 P Solid biofuels -- Determination of calorific value (ISO 18125:2017)
- PN C04198-1993 Petroleum products. Estimation of net heat of combustion of aviation fuels by calculation method
- PN C04757-1985 Gaseous fuels Calculation of gross and net calorific value, density, relative density and Wobbe index from gas composition
Society of Automotive Engineers (SAE), Calorific value of combustion plastic
SAE - SAE International, Calorific value of combustion plastic
Lithuanian Standards Office , Calorific value of combustion plastic
AENOR, Calorific value of combustion plastic
- UNE-EN ISO 1716:2011 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
- UNE 51112:1985 AVIATION FUELS. ESTIMATION OF NET HEAT OF COMBUSTION
- UNE-EN 14918:2011 Solid biofuels - Determination of calorific value
- UNE-EN 15400:2011 Solid recovered fuels - Determination of calorific value
- UNE 32105:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY THE CALORIMETER BOMB METHOD.
- UNE 32006:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY AUTOMATIC CALORIMETER.
- UNE-EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
- UNE 53087-1:2002 Plastics and rubber. Determination of chlorine content. Part 1: Wickbold-combustion method.
- UNE 51123:1986 STANDARD TEST METHOD FOR HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS BY BOMB CALORIMETER
- UNE-EN 746-2:2011 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
ES-AENOR, Calorific value of combustion plastic
Taiwan Provincial Standard of the People's Republic of China, Calorific value of combustion plastic
- CNS 14535-2001 Method of test for flammability of plastic material
- CNS 13590-1995 Method of Test for Plastic Flammability - Oxygen Index Method
- CNS 6359-1980 Method of Test for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Caloriment
- CNS 10835-1984 Method of Test for Gross Calorific Value of Solid Mineral Fuels by the Calorimeter Bomb Method, and Calculation of Net Calorific Value
- CNS 14705-2007 Method of test for heat release rate for building materials - Cone calorimeter method
- CNS 14705-2002 Method of test for heat release rate for building materials
- CNS 14765-2003 Standard practice for calculating heat value, compressibility factor, and relative density of gaseous fuels
RO-ASRO, Calorific value of combustion plastic
- STAS 7137-1988 PL.ASTICS Determination of rigid plastics flamability by incandoseent rod method
- STAS 12321-1985 PLASTICS. COMBUSTIBILITY DETERMINATION BY OXYGEN INDEX METHOD
- STAS 8887-1971 TURBO-JET-FUEL Determination of combustion heat
- STAS SR ISO 1928:1995 Solid mineral fuels Determination of gross calorific value by the calorimeter bomb method and calculation of net calorific value
- STAS 6226-1987 METAL HEATING STOVES BURING WITH SOLID FUELS General technieal requirements for quality
Japanese Industrial Standards Committee (JISC), Calorific value of combustion plastic
- JIS K 7201-2:2007 Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
- JIS K 7201-3:2008 Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
- JIS K 7342:2007 Plastics -- Fire tests -- Standard ignition sources
- JIS K 7217:1983 Analytical method for determining gases evolved from burning plastics
- JIS K 7340:2006 Plastics -- Vertical flame spread determination for film and sheet
- JIS K 7193:1999 Plastics -- Determination of ignition temperature using a hot-air furnace
- JIS K 7193:2010 Plastics -- Determination of ignition temperature using a hot-air furnace
- JIS K 7201-1:1999 Plastics -- Determination of burning behaviour by oxygen index -- Part 1: Guidance
- JIS K 7241:2005 Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame
- JIS K 7201-2:1999 Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
- JIS K 7201-1:2021 Plastics -- Determination of burning behaviour by oxygen index -- Part 1: General requirements
- JIS K 7201-3:2021 Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
- JIS K 7241:2023 Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame
- JIS C 3666-2:2002 Test on gases evolved during combustion of electric cables -- Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
Military Standard of the People's Republic of China-General Armament Department, Calorific value of combustion plastic
CZ-CSN, Calorific value of combustion plastic
- CSN 65 6169-1986 Liquid fuels. Determination of gross and net heat of combustion
- CSN 44 1352-1980 Solid fuels. Determination of calorific values
- CSN 64 0758-1979 Plastics. Determination of hydrogen cyanide in combustion products of plastics
- CSN 06 4310-1998 Gas fuel burners for Industrlal furnaces. Series of nominal thermal output
RU-GOST R, Calorific value of combustion plastic
- GOST 34240-2017 Aviation fuels. Estimation of net heat of combustion
- GOST 34194-2017 Aviation fuels. Estimation of net heat of combustion
- GOST 33106-2014 Solid biofuel. Determination of calorific value
- GOST 33108-2014 Solid recovered fuel. Determination of calorific value
- GOST 147-2013 Solid mineral fuel. Determination of gross calorific value and calculation of net calorific value
- GOST R 56025-2014 Building materials. Test method of heat of combustion
- GOST 33299-2015 Liquid hydrocarbon fuels. Determination of the heat of combustion by bomb calorimeter (precision method)
- GOST R 50591-1993 Gas-consuming thermal units. Industrial gas-burners. Limiting concentration rates of NOx in combustion products
- GOST R 55851-2013 Gas burners, gas/oil burner and pulverized solid fuel/gas burners of steam and hot-water boilers. Acceptance test. Basis requirements
- GOST 33013-2014 Room heaters, solid-fuel burning. Requirements and test methods
- GOST 11065-1990 Jet propulsion fuel. Method for the calculation of low specific heat of combustion
- GOST R 8.927-2016 State system for ensuring the uniformity of measurements. Solid mineral fuels. Gross and net calorific value. Accuracy parameters
TR-TSE, Calorific value of combustion plastic
- TS 3562-1981 ESTIMATION OF NET HEAT OF COMBUSTION OF AVIATION FUELS
GOSTR, Calorific value of combustion plastic
- GOST 34210-2017 Petroleum fuels. Determination of the heat of combustion in calorimetric bomb
- GOST R 58440-2019 Middle distillate fuels. Determination of derived cetane number using a constant volume combustion chamber with direct fuel injection
British Standards Institution (BSI), Calorific value of combustion plastic
- BS ISO 10093:1995 Plastics. Fire tests. Standard ignition sources
- BS ISO 10093:2020 Plastics. Fire tests. Standard ignition sources
- BS EN ISO 10093:1999 Plastics - Fire tests - Standard ignition sources
- BS EN ISO 1716:2010 Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value)
- BS EN 15400:2011 Solid recovered fuels. Determination of calorific value
- BS EN ISO 21654:2021 Solid recovered fuels. Determination of calorific value
- BS ISO 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
- BS EN ISO 25762:2012 Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
- DD CEN/TS 15400:2006 Solid recovered fuels — Methods for the determination of calorific value
- BS EN ISO 1716:2018 Tracked Changes. Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value)
- BS EN ISO 4589-1:2000 Plastics - Determination of burning behaviour by oxygen index - Guidance
- BS EN ISO 4589-1:1997 Plastics - Determination of burning behaviour by oxygen index - Guidance
- BS DD CEN/TS 14918:2005 Solid Biofuels — Method for the determination of calorific value
- BS DD CEN/TS 15400:2006 Solid recovered fuels - Methods for the determination of calorific value
- BS DD CEN/TS 14918:2006 Solid biofuels - Method for the determination of calorific value
- BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products. General guidance
- BS 3378:1986 Specification for roomheaters burning solid mineral fuels
- BS EN ISO 4589-2:1999 Plastics - Determination of burning behaviour by oxygen index - Ambient-temperature test
- BS EN ISO 4589-2:1996 Plastics. Determination of burning behaviour by oxygen index. Ambient-temperature test
- BS EN ISO 4589-2:2017 Plastics. Determination of burning behaviour by oxygen index. Ambient-temperature test
- 19/30369419 DC BS EN ISO 21654. Solid recovered fuels. Determination of calorific value
- 20/30389844 DC BS ISO 1928. Solid mineral fuels. Determination of gross calorific value
- BS 7420:1991 Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)
- BS 3250-1:1993 Methods for thermal testing of domestic solid mineral fuel burning appliances with convection - Flue loss method
- BS 5946:1980 Method of test for determination of the punking behaviour of phenol-formaldehyde foam
- BS ISO 4589-4:2021 Plastics. Determination of burning behaviour by oxygen index. High gas velocity test
- BS EN 746-2:2010 Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems
- BS EN 50267-2-2:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of
- BS EN 50267-2-3:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity
- BS ISO 13775-1:2000 Thermoplastic tubing and hoses for automotive use - Non-fuel applications
- BS ISO 13775-1:2015 Thermoplastic tubing and hoses for automotive use. Non-fuel applications
- BS ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
- PAS 5420:2023 Liquid fuels. Sustainable bioliquid fuels for use in fixed combustion applications for heating, hot water and cooking. Specification
- BS ISO 13775-2:2000 Thermoplastic tubing and hoses for automotive use - Petroleum-based fuel applications
- BS ISO 13775-2:2016 Thermoplastic tubing and hoses for automotive use. Petroleum-based-fuel applications
- BS EN ISO 4589-3:1996 Plastics. Determination of burning behaviour by oxygen index. Elevated temperature test
- BS EN ISO 4589-3:2017 Tracked Changes. Plastics. Determination of burning behaviour by oxygen index. Elevated-temperature test
- BS EN ISO 4589-1:2017 Tracked Changes. Plastics. Determination of burning behaviour by oxygen index. General requirements
- BS EN 746-2:1997 Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems
European Committee for Standardization (CEN), Calorific value of combustion plastic
- EN ISO 1716:2018 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
- EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
- EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value (ISO 21654:2021)
- EN 15400:2011 Solid recovered fuels - Determination of calorific value
- EN ISO 10093:1998 Plastics - Fire Tests - Standard Ignition Sources ISO 10093:1998
- EN ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)
- prEN 16510-2-1-2021 Residential solid fuel burning appliances - Part 2-1: Roomheaters
- EN 16510-2-1:2022 Residential solid fuel burning appliances - Part 2-1: Roomheaters
- prEN 16510-2-5 Residential solid fuel burning appliances - Part 2-5: Slow heat release appliances
- EN ISO 4589-1:2017 Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements
- EN ISO 4589-1:1999 Plastics - Determination of Burning Behaviour by Oxygen Index - Part 1: Guidance
- EN 746-2:2010 Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems
- EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
- EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
- EN 746-2:1997 Industrial Thermoprocessing Equipment - Part 2: Safety Requirements for Combustion and Fuel Handling Systems Remains Current
- prEN 746-2-1992 Industrial thermoprocessing equipment; part 2: safety requirements for combustion and fuel handling systems
ES-UNE, Calorific value of combustion plastic
- UNE-EN ISO 1716:2021 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018)
- UNE-EN ISO 21654:2022 Solid recovered fuels - Determination of calorific value (ISO 21654:2021)
- UNE-EN ISO 18125:2018 Solid biofuels - Determination of calorific value (ISO 18125:2017)
German Institute for Standardization, Calorific value of combustion plastic
- DIN EN ISO 10093:1999 Plastics - Fire tests - Standard ignition sources (ISO 10093:1998); German version EN ISO 10093:1998
- DIN EN ISO 1716:2018-10 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018); German version EN ISO 1716:2018
- DIN 4702-7:1996 Heating boilers - Part 7: Condensing boiler for liquid fuels
- DIN 51857:1997 Gaseous fuels and other gases - Calculation of calorific value, density, relative density and Wobbe index of pure gases and gas mixtures
- DIN EN ISO 4589-3:1996 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:1996); German version EN ISO 4589-3:1996
- DIN EN ISO 4589-2:2006 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996 + Amd. 1:2005)(includes Amendment A1:2006) English version of DIN EN ISO 4589-2:1999 + A1:2006-06
- DIN 4702-6:1990 Central heating boilers; condensing boilers for gaseous fuels
- DIN EN ISO 21654:2021-12 Solid recovered fuels - Determination of calorific value (ISO 21654:2021); German version EN ISO 21654:2021
- DIN 51900:2022-06 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value / Note: Date of issue 2022-05-06*Intended as replacement for DIN 51900-1 (2000-04), DIN 51900-1 Berichtigung 1 (20...
- DIN EN ISO 18125:2017 Solid biofuels - Determination of calorific value (ISO 18125:2017)
- DIN EN ISO 18125:2017-08 Solid biofuels - Determination of calorific value (ISO 18125:2017); German version EN ISO 18125:2017
- DIN 25463-1:1990 Decay heat power in nuclear fuels of light water reactors; non-recycled nuclear fuels
- DIN EN 2310:1991 Aerospace series; test methods for the flame resistance rating of non-metallic materials; german version EN 2310:1991
- DIN EN 16510-2-1:2023 Residential solid fuel burning appliances - Part 2-1: Roomheaters
- DIN EN 16510-2-1:2023-02 Residential solid fuel burning appliances - Part 2-1: Roomheaters; German version EN 16510-2-1:2022 / Note: DIN EN 13240 (2005-10) and DIN EN 13240 Berichtigung 1 (2008-06) remain valid alongside this standard until 2025-11-30.
- DIN EN 15250 Berichtigung 1:2015-05 Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007, Corrigendum to DIN EN 15250:2007-06
- DIN EN 15250:2007-06 Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007 / Note: DIN 18840 (2005-08) remains valid alongside this standard until 2007-09-01.*To be replaced by DIN EN 15250 (2012-10).
- DIN EN ISO 21654:2020 Solid recovered fuels - Determination of calorific value (ISO/DIS 21654:2019); German and English version prEN ISO 21654:2019
- DIN 18894:2005 Fireplaces fired by solid fuel - Woodpellet-fired independent heaters - Requirements, testing and marking
- DIN EN 16510-2-5:2023-05 Residential solid fuel burning appliances - Part 2-5: Slow heat release appliances; German and English version prEN 16510-2-5:2023 / Note: Date of issue 2023-04-07*Intended as replacement for DIN EN 15250 (2007-06), DIN EN 15250 Berichtigung 1 (2015-05).
- DIN EN ISO 4589-1:1999 Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance (ISO 4589-1:1996); German version EN ISO 4589-1:1999
- DIN 18840:2005 Fireplaces fired by solid fuel - Slow heat release appliances - Requirements, testing and marking
- DIN 18894:2005-02 Fireplaces fired by solid fuel - Woodpellet-fired independent heaters - Requirements, testing and marking
- DIN EN ISO 2578:1998-10 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
- DIN EN 15400:2011 Solid recovered fuels - Determination of calorific value; German version EN 15400:2011
- DIN 25463-1 Bb.1:1990 Decay heat power in nuclear fuels of light water reactors; non-recycled nuclear fuels; documentation and illustration
- DIN 51900-3:2005 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket
- DIN EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
- DIN 18230-2:1999 Structural fire protection in industrial buildings - Part 2: Determination of combustion behaviour of materials in storage arrangement - Combustion factor m
- DIN EN 746-2:2011-02 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems; German version EN 746-2:2010 / Note: To be replaced by DIN EN 746-2 (2020-03), DIN EN ISO 13577-2 (2021-11).
SE-SIS, Calorific value of combustion plastic
- SIS SS 18 71 72-1984 Biofuels - Determination of gross calorific value by calorimeter and calculation of net calorific value
- SIS SS-ISO 4589:1988 Plastics — Determination of flammability by oxygen index
- SIS SS 18 71 82-1990 Solid fuels — Determination of gross calorific value by the calorimeter bomb method, and calculation of net calorific value
Korean Agency for Technology and Standards (KATS), Calorific value of combustion plastic
- KS M 3030-1980(2001) DETERMINATION OF FLAMMABILITY AND BURNING RATE OF PLASTICS IN THE FORM OF FILM
- KS M 3030-1980 DETERMINATION OF FLAMMABILITY AND BURNING RATE OF PLASTICS IN THE FORM OF FILM
- KS I 3305-2014 Fuels made from used plastics by thermal decomposition
- KS I 3305-2016 Fuels made from used plastics by thermal decomposition
- KS M 3047-2008 Methods for the analysis of evolved gases concentration by burning of plastics
- KS M ISO 10840:2013 Plastics — Guidance for the use of standard fire tests
- KS M ISO 10840:2004 Plastics-Guidance for the use of standard fire tests
- KS M 3030-2002 DETERMINATION OF FLAMMABILITY AND BURNING RATE OF PLASTICS IN THE FORM OF FILM
- KS M ISO 18125:2021 Solid biofuels — Determination of calorific value
- KS E ISO 1928-2015(2020) Solid mineral fuels — Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
- KS B 8903-2017 Pellet combustion device for small heating boilers
- KS M ISO 12992:2006 Plastics－Vertical flame spread determination for film and sheet
- KS M ISO 8030:2008 Rubber and plastics hoses-Method of test for flammability
- KS M 2057-2006 Crude petroleum and petroleum products－Determination and estimation of heat of combustion
- KS M ISO 4589-1-2002(2017) Plastics－Determination of burning behaviour by oxygen index－Part 1：Guidance
- KS M ISO 4589-1-2002(2022) Plastics－Determination of burning behaviour by oxygen index－Part 1：Guidance
- KS M ISO 4589-1:2002 Plastics－Determination of burning behaviour by oxygen index－Part 1：Guidance
- KS M ISO 4589-3-2002(2022) Plastics－Determination of burning behaviour by oxygen index－Part 3：Elevated－temperature test
- KS B ISO 10774:2005 Solid fuelled heaters-Test method for determining allowable clearances from combustible surfaces
- KS B ISO 10774:2013 Solid fuelled heaters－Test method for determining allowable clearances from combustible surfaces
- KS M ISO 5659-2:2012 Plastics-Smoke generation-Part 2:Determination of optical density by a single-chamber test
- KS M ISO 4589-3:2002 Plastics－Determination of burning behaviour by oxygen index－Part 3：Elevated－temperature test
- KS M ISO 4589-2:2011 Plastics-Determination of burning behaviour by oxygen index-Part 2:Ambient-temperature test
- KS M ISO 9772:2018 Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
- KS M 3047-2018 Methods for the analysis of evolved gases concentration by burning of plastics
American National Standards Institute （ANSI), Calorific value of combustion plastic
- ANSI/DASMA 107-2012 Room Fire Test Standard for Garage Doors Using Foam Plastic Insulation
- ANSI/ASTM D3814:1999 Guide for Locating Combustion Test Method for Plastics
- ANSI/ASTM D635:1998 Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position (08.01)
- ANSI/ASTM D5025:1999 Specification for a Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials (08.03)
- ANSI/ASHRAE Standard 41.13-2023 Standard Methods for Fuel Higher Heating Value Measurement
- ANSI/ASTM D2843:1999 Test Method for Density of Smoke from the Burning or Decomposition of Plastics (08.02)
- ANSI/UL 2523-2013 Standard for Safety for Solid Fuel-Fired Hydronic Heating Appliances, Water Heaters, and Boilers
- ANSI/ASTM D2863:2000 Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
- ANSI/ASTM D5207:1998 Practice for Calibration of 20 and 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials (08.03)
FI-SFS, Calorific value of combustion plastic
Underwriters Laboratories (UL), Calorific value of combustion plastic
- UL 1975-1990 Fire tests for foamed plastics used for decorative purposes
- UL 1975-1996 Fire tests for foamed plastics used for decorative purposes
- UL 462-1993 UL Standard for Safety Heat Reclaimers for Gas-, Oil-, or Solid Fuel-Fired Appliances Second Edition; Reprint with Revisions Through and Including November 3, 2006
- UL 1370-2011 Unvented alcohol fuel burning decorative heating appliances
- UL 1370 BULLETIN-2012 UL Standard for Safety Unvented Alcohol Fuel Burning Decorative Heating Appliances
- UL 1887-2004 UL Standard for Safety Fire Test of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics Third Edition
海关总署, Calorific value of combustion plastic
- SN/T 3125-2021 Determination of heat of combustion of liquid hydrocarbon fuels by bomb calorimeter method
GM Europe, Calorific value of combustion plastic
- GME 14012-2008 Thermoplastic Tubing for Hot Diesel Fuel Lines (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14587.)
BE-NBN, Calorific value of combustion plastic
Professional Standard - Petrochemical Industry, Calorific value of combustion plastic
- SH/T 0679-1999 Standard test method for estimation of net heat of combustion of aviation fuels
NL-NEN, Calorific value of combustion plastic
- NEN 1884-1980 Liquid fueis - Determination of the gross calorie value with an adiabatic calorimeter and derivation of the net calorific value
- NEN 1974-1986 Solid mineral fuels - Calculation of the hydrogen content and the net calorific value from the volatile matter content and the gross calorific value
TH-TISI, Calorific value of combustion plastic
- TIS 2249-2005 Plastics.guidance for the use of standard fire tests
CEN - European Committee for Standardization, Calorific value of combustion plastic
- EN ISO 18125:2017 Solid biofuels - Determination of calorific value
- PD CEN/TS 15400:2006 Solid recovered fuels - Methods for the determination of calorific value
- PD CEN/TS 14918:2005 Solid Biofuels - Method for the determination of calorific value
- PREN 13240-2011 Room heaters fired by solid fuel - Requirements and test methods
- PREN 16510-2-1-2013 Residential solid fuel burning appliances - Part 2-1: Roomheaters
- EN ISO 15791-1:2004 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance
- EN ISO 4589-2:1999 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (Incorporates Amendment A1: 2006)
- PREN 13341-2018 Static thermoplastic tanks for above ground storage of fuel - Product characteristics and test methods
KR-KS, Calorific value of combustion plastic
- KS M ISO 18125-2021 Solid biofuels — Determination of calorific value
- KS M ISO 9772-2018 Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
Professional Standard - Public Safety Standards, Calorific value of combustion plastic
- GA 179-1998 Technical specifications for burning properties of fire-retardant glass fiber reinforced plastics
ZA-SANS, Calorific value of combustion plastic
- SANS 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorific method, and calculation of net calorific value
- SANS 1928:1995 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value
- SANS 329:2008 Industrial thermoprocessing equipment - Safety requirements for combustion and fuel-handling systems
Association of German Mechanical Engineers, Calorific value of combustion plastic
- DVS 2205-1-1974 Calculation of containers and apparatuses of thermoplastics; characteristic values
- DVS 2205-1-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values
- DVS 2205-1-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values
- DVS 2205-1-2015
- DVS 2205-1-2014
- DVS 2205-1-2002 Design calculations for containers and apparatus made from thermoplastics - Characteristic Values
- DVS 2205-1-1987 Design calculations for containers and apparatus made from thermoplastics - Characteristic values
- DVS 2205-1 Beiblatt 2-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polypropylene material group
- DVS 2205-1 Beiblatt 2-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polypropylene material group
- DVS 2205-1 Beiblatt 6-2008
- DVS 2205-1 Beiblatt 3-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyvinyl chloride material group
- DVS 2205-1 Beiblatt 3-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyvinyl chloride material group
- DVS 2205-1 Beiblatt 1-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyethylene material group
U.S. Military Regulations and Norms, Calorific value of combustion plastic
国家市场监督管理总局、中国国家标准化管理委员会, Calorific value of combustion plastic
- GB/T 2408-2021 Plastics—Determination of burning characteristics—Horizontal and vertical test
Group Standards of the People's Republic of China, Calorific value of combustion plastic
- T/CCAS 018-2021 Determination of calorific value of low thermal value raw fuel for cement
- T/SHPTA 016-2021 Flame retardant thermoplastic elastomer materials for wire & cable
- T/NAIA 0138-2022 Determination method of calorific value of light liquid fuel oil (oxygen bomb calorimetry)
- T/CPCIF 0194-2022 The anti-blooming test of powder flame retardants in thermoplastics
- T/SHPTA 015-2021 Flame retardant thermoplastic polyurethane elastomer materials for wire & cable
CH-SNV, Calorific value of combustion plastic
Professional Standard - Machinery, Calorific value of combustion plastic
- JB/T 10707-2007 Low-smoke halogen-free thermoplastic compounds for flame retardant cables
Professional Standard - Electricity, Calorific value of combustion plastic
- DL/T 568-1995 Fast test methods for ultimate analysis of fuel by infrared absorption & thermal conductivity
PT-IPQ, Calorific value of combustion plastic
- NP 3359-1988 Plastics Evaluation of fire response of rigid cellular plastics using a small comer configuration
Standard Association of Australia （SAA）, Calorific value of combustion plastic
- AS 2122.1:1993 Combustion characteristics of plastics - Determination of flame propagation - Surface ignition of vertically oriented specimens of cellular plastics
NZ-SNZ, Calorific value of combustion plastic
- AS/NZS 4886:2007 Domestic solid fuel burning appliance- Pellet heaters-Determination of flue gas emission
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Calorific value of combustion plastic
- GB/T 34692-2017 Thermoplastic elastomer—Determination of halogen—Oxygen bomb combustion-ion chromatography
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Calorific value of combustion plastic
- ASHRAE 4168-1998 The Knitted Metal Fiber Burner: A New Generation of Surface Combustion Material for Radiant Heat and Low NOx Applications
Professional Standard - Civil Aviation, Calorific value of combustion plastic
- MH/T 6042-2006 Test methhod to determine the flammability and flame propagation characteristics of thermal/acoustic insulation materials