ZH
RU
ES
Calorific value of combustion of plastic
Calorific value of combustion of plastic, Total:499 items.
In the international standard classification, Calorific value of combustion of plastic involves: Fuels, Protection against fire, Construction materials, Plastics, Rubber and plastics products, Analytical chemistry, Cellular materials, Elements of buildings, Petroleum products in general, Reinforced plastics, Thermodynamics and temperature measurements, Heat recovery. Thermal insulation, Products of the chemical industry, Domestic, commercial and industrial heating appliances, Industrial furnaces, Burners. Boilers, Electrical accessories, Nuclear energy engineering, Fluid storage devices, Materials for aerospace construction, Crude petroleum, Products of the textile industry, Electrical wires and cables, Pipeline components and pipelines, Installations in buildings, Natural gas, Rubber, Internal combustion engines for road vehicles, Electrical engineering in general, Wastes, GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION, Vocabularies, Non-textile floor coverings.
Professional Standard - Commodity Inspection, Calorific value of combustion of plastic
- SN/T 4112-2015 Determination of combustion calorific value of polypropylene plastic - Oxygen bomb calorimetry
- SN/T 3101-2012 Estimation of net and gross heat of combustion of burner and diesel fuels
- SN/T 3125-2012 Determination of heat of combustion of liquid hydrocarbon fuels.Bomb calorimeter
Professional Standard - Railway, Calorific value of combustion of plastic
- TB/T 2981-2000 Determination of the highest calorific value of material combustion
- TB/T 2701-1996 Determination of Combustion Oxygen Index of Plastics
国家质量监督检验检疫总局, Calorific value of combustion of plastic
- SN/T 4942-2017 Determination of the combustion heat value of biofuels Oxygen bomb calorimetry
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Calorific value of combustion of plastic
- GB/T 14402-2007 Reaction to fire tests for building materials and products.Determination of the heat of combustion
- GB/T 14402-1993 Test method of heat of combustion for building materials
- GB/T 2407-1980 Plastics--Combustion performance test--Blazing rod method
- GB/T 2407-2008 Plastics.Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
- GB/T 9638-1988 Gravimetric determination of smoke particulates from combustion of plastic materials
- GB/T 6011-1985 Test method for flammability characteristics of fiber-reinforced plastics--Incandescent rod method
- GB/T 6011-2005 Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method
- GB 6011-1985 Test method for flammability characteristics of fiber-reinforced plastics－Incandescent rod method
- GB/T 9343-1988 Test method for flammability of plastics--Flash-ignition temperature and self-ignition temperature test
- GB/T 9343-2008 Test method for flammability of plastics.Determination of flash-ignition temperature and self-ignition temperature
- GB/T 22472-2008 Tests for flammability of plastic materials for parts in devices and appliances
- GB/T 2408-2008 Plastics.Determination of burning characteristics.Horizontal and vertical test
- GB/T 4610-1984 Test for flammability of plastics--Ignition temperature test
- GB/T 11785-2005 Reaction to fire tests for floorings.Determination of the burning behaviour using a radiant heat source
- GB/T 16173-1996 Test method for smoke generation from burning or pyrolysis of building materials(dual-chamber test)
- GB/T 41879-2022 Plastics—Burning behaviour—Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
International Organization for Standardization (ISO), Calorific value of combustion of plastic
- ISO/CD TS 23947-2.2 Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics
- ISO/TR 10840:1993 Plastics; burning behaviour; guidance for development and use of fire tests
- ISO/R 1326:1970 Plastics; Determination of flammability and burning rate of plastics in the form of film
- ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
- ISO 1716:2018 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
- ISO 10840:2003 Plastics - Guidance for the use of standard fire tests
- ISO 10840:2008 Plastics - Guidance for the use of standard fire tests
- ISO 10093:1994 Plastics - Fire tests - Standard ignition sources
- ISO 21654:2021 Solid recovered fuels - Determination of calorific value
- ISO 18125:2017 Solid biofuels - Determination of calorific value
- ISO/TR 10840:1993/Cor 1:1995 Plastics - Burning behaviour - Guidance for development and use of fire tests; Technical Corrigendum 1
- ISO 25762:2009 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
- ISO 12992:1995 Plastics - Vertical flame spread determination for film and sheet
- ISO 1172:1975 Textile glass reinforced plastics; Determination of loss on ignition
- ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance
- ISO 10351:1992 Plastics; determination of the combustibility of specimens using a 125 mm flame source
- ISO 15791-1:2002 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance
- ISO 9772:2001 Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
- ISO 9772:2012 Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
- ISO 9772:2020 Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
- ISO 10093:1994/Cor 1:1995 Plastics - Fire tests - Standard ignition sources; Technical Corrigendum 1
- ISO 10774:1992 Solid fuelled heaters; test method for determining allowable clearances from combustible surfaces
- ISO 181:1981 Plastics; Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
- ISO 9773:1990 Plastics; determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source
- ISO 13229:2010 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value
- ISO 9772:1994 Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
- ISO 30021:2013 Plastics.Burning behaviour.Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
- ISO 1210:1992 Plastics; determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
- ISO 27547-1:2010 Plastics - Preparation of test specimens of thermoplastic materials using mouldless technologies - Part 1: General principles, and laser sintering of test specimens
- ISO/CD 9773 Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
- ISO/TS 18226:2006 Plastics pipes and fittings - Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
HU-MSZT, Calorific value of combustion of plastic
American Society for Testing and Materials (ASTM), Calorific value of combustion of plastic
- ASTM D4868-00(2010) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
- ASTM D4529-01(2011) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338/D3338M-09(2014)e2 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D4529-01(2006) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D4529-95 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D4529-01 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338/D3338M-09 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D6446-01(2006) Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
- ASTM D4868-00 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
- ASTM D4868-90(1995)e1 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
- ASTM D4868-00(2005) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
- ASTM D5025-11 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D5025-12 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D5025-05 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D5025-20 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D5025-20a Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D5025-99 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D5025-12e1 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM D4868-17 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
- ASTM D1405/D1405M-08(2013) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D7309-07a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-11 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-07 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D1405/D1405M-08 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D635-06 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D635-14 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D635-98 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D635-03 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D7309-13 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-21b Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D1405-01 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D1405-95a Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM E1509-04 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM D3338-92 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338/D3338M-20 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338/D3338M-20a Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D4529-17 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338/D3338M-09(2014)e1 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338-08 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM E1509-12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM D7309-21a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-21 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-20 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-19 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-19a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D240-02(2007) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-92(1997)e2 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-00 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-02 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D3338-05 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338-00 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D3338-95 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM E1602-01 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
- ASTM E1602-94 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
- ASTM E1602-03(2010)e1 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
- ASTM D3338-04 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM E1509-12(2017) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM D3338/D3338M-09(2014) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- ASTM D635-22 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D240-14 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-17 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D6446-99 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
- ASTM D6446-01 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
- ASTM D240-87(1991)e1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-76 Standard Test Method for Heat Of Combustion Of Liquid Hydrocarbon Fuels By Bomb Calorimeter
- ASTM D240-87e1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-19 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D568-77 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Flexible Plastics in a Vertical Position
- ASTM E1602-03 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
- ASTM D2843-10 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
- ASTM D635-10 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D6890-21 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM D2843-19 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
- ASTM D4809-18 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D3588-98 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
- ASTM D3588-98(2003) Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
- ASTM D2382-83 Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)
- ASTM D2382-76 Standard Test Method for Heat Of Combustion Of Hydrocarbon Fuels By Bomb Calorimeter (High-Precision Method)
- ASTM D4809-09ae1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D2382-88 Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)
- ASTM D4809-13 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D2843-22 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
- ASTM D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
- ASTM D7170-09 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oilsx2014;Fixed Range Injection Period, Constant Volume Combustion Chamber Method
- ASTM D7170-12 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oilsmdash;Fixed Range Injection Period, Constant Volume Combustion Chamber Method
- ASTM D4891-89(2006) Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
- ASTM D4891-89(2001) Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
- ASTM D6890-04 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM D2843-99(2004)e1 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
- ASTM D2843-99 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
- ASTM D2843-99(2004) Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
- ASTM D5048-20 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D5048-03 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-18 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D5048-19 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D2843-16 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
- ASTM D4809-06 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D4809-00 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D4809-95 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D4809-09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D4809-00(2005) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- ASTM D6890-11b Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM E162-09 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
- ASTM D5048-97 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-09 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-14 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D4891-89(1994)e1 Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
- ASTM D5207-98 Standard Practice for Calibration of 20 and 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials
- ASTM D7170-06a Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils-Fixed Range Injection Period, Constant Volume Combustion Chamber Method
- ASTM D7170-06 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils-Fixed Range Injection Period, Constant Volume Combustion Chamber Method
- ASTM E711-23e1 Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
- ASTM D6890-06 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM D2863-10 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
- ASTM D3801-19 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3801-19a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3801-00 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3801-20 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3014-19 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
- ASTM D3014-99 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
- ASTM D3014-18 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
- ASTM D3014-19a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
- ASTM D7314-21 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
- ASTM D7314-10(2015) Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
- ASTM D7314-08 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
- ASTM D2863-12 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
- ASTM D2863-12e1 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
- ASTM D2863-13 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics lpar;Oxygen Indexrpar;
- ASTM D4891-13 Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
- ASTM D6890-08 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM D6890-09 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM D6890-10 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM D6890-11 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM D8183-22 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
- ASTM D8183-18 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
- ASTM D6890-22 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM E162-13 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
- ASTM D6890-13b Standard Test Method for Determination of Ignition Delay and Derived Cetane Number lpar;DCNrpar; of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM D6890-15 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM D6890-15b Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM D4891-13(2018) Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
- ASTM D5207-20 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials
- ASTM D3801-10 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3014-04a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
- ASTM D3014-04 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
- ASTM E711-87(1996) Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
- ASTM E711-87(2004) Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
- ASTM D7164-21 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
- ASTM D3588-98(2017) Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
- ASTM D7314-10 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
- ASTM D2863-95 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index)
- ASTM D2863-06 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
- ASTM D2863-08 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
- ASTM D2863-09 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
- ASTM D2863-17a Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
- ASTM D2863-19 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
PL-PKN, Calorific value of combustion of plastic
- PN C04062-1986 Petroleum products Determination of gross heat of combustion by bomb calorimeter and calculation of net heat of combustion, of li?uid fuels
- PN C96002-1986 Gas fuels Messuring of gross and net calorific values with an calorimeter
- PN-EN ISO 18125-2017-07 P Solid biofuels -- Determination of calorific value (ISO 18125:2017)
- PN C04198-1993 Petroleum products. Estimation of net heat of combustion of aviation fuels by calculation method
- PN C04757-1985 Gaseous fuels Calculation of gross and net calorific value, density, relative density and Wobbe index from gas composition
Danish Standards Foundation, Calorific value of combustion of plastic
- DS/EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
- DS/EN 15400:2011 Solid recovered fuels - Determination of calorific value
- DS/ISO 21654:2021 Solid recovered fuels – Determination of calorific value
- DS/EN 14918:2010 Solid biofuels - Determination of calorific value
- DS/ISO 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
- DS/ISO 9772:2020 Cellular plastics – Determination of horizontal burning characteristics of small specimens subjected to a small flame
- DS/EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
- DS/EN ISO 21654:2021 Solid recovered fuels – Determination of calorific value (ISO 21654:2021)
- DS/EN 13240/A2:2004 Roomheaters fired by solid fuel - Requirements and test methods
- DS/EN 13240:2003 Roomheaters fired by solid fuel - Requirements and test methods
- DS/EN 746-2:2010 Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems
- DS/EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value
- DS/EN ISO 9773:1998 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
- DS/EN 12809:2001 Residental independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
- DS/EN 12809/A1/AC:2007 Residental independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
- DS/EN 12809/AC:2006 Residental independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
- DS/EN 12809/A1:2004 Residental independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
Association Francaise de Normalisation, Calorific value of combustion of plastic
- NF P92-521*NF EN ISO 1716:2018 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
- NF T51-074:1986 Plastics. Fire behaviour. Hot wire test.
- NF P92-521:2013 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
- NF X34-208:2011 Solid recovered fuels - Determination of calorific value.
- NF X34-208*NF EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value
- NF X34-104*NF EN ISO 18125:2017 Solid biofuels - Determination of calorific value
- NF EN ISO 21654:2021 Combustibles solides de récupération - Détermination du pouvoir calorifique
- NF EN ISO 18125:2017 Biocombustibles solides - Détermination du pouvoir calorifique
- NF M07-030:1996 Combustibles liquides pétroliers - Détermination du pouvoir calorifique
- NF T51-086*NF EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
- NF D32-307*NF EN 13240:2002 Roomheaters fired by solid fuel - Requirements and test methods
- NF D32-307/A2*NF EN 13240/A2:2005 Roomheaters fired by solid fuel - Requirements and test methods
- NF T54-412*NF EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment
- NF EN 746-2:2010 Équipements thermiques industriels - Partie 2 : prescriptions de sécurité concernant la combustion et la manutention des combustibles
- NF T51-084-1*NF EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1 : general guidance
- NF D35-337:2001 Heating - Gas - Liquid fuel, solid fuel - Gas-fired central heating boilers of heat output not exceeding 70 kW designed to be connected to a mechanical installation for the evacuation of the combustion products.
- NF M07-168*NF EN 17155:2018 Liquid petroleum products - Determination of indicated cetane number (ICN) of middle distillate fuels - Primary reference fuels calibration method using a constant volume combustion chamber
- NF EN 1266/A1:2005 Appareils de chauffage indépendants à convection utilisant les combustibles gazeux et intégrant un ventilateur pour faciliter l'alimentation en air comburant et/ou l'évacuation des produits de combustion
- NF EN 1266:2003 Appareils de chauffage indépendants à convection utilisant les combustibles gazeux et intégrant un ventilateur pour faciliter l'alimentation en air comburant et/ou l'évacuation des produits de combustion
- NF M07-161*NF EN 16715:2017 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
- NF EN 1778:2000 Valeurs caractéristiques des constructions thermoplastiques soudées - Détermination des contraintes admissibles et des modules pour la conception du matériel thermoplastique
- NF E32-200-2*NF EN 746-2:2010 Industrial thermoprocessing equipment - Part 2 : safety requirements for combustion and fuel handling systems.
- NF D35-323:1991 Heating. Gas. Liquid fuel, solid fuel. Gas hurning appliances for instantaneous production of hot water for domestic use, intended to be connected to a mechanical installation for the evacuation of combustion products.
- NF T51-225*NF EN ISO 2578:1998 Plastics. Determination of time-temperature limits after prolonged exposure to heat.
- NF T51-120-6:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 6 : essai de flexion par flambement.
- NF T51-072:1993 Plastics. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source.
- NF M88-561/A1:2021 Secondary containments of thermoplastics static tanks for above ground storage of domestic heating oils, liquid fuels for movable heating appliance and diesel fuels - Blow moulded or rotationally moulded polyethylene (PE) or metallic secondary containment
- NF D35-334:1985 Equipment for the conversion to gas of central heating boilers built for solid and liquid fuels. Atmospheric burners.
- NF T51-076*NF EN ISO 9773:1998 Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source.
- NF M07-118:2007 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber.
- NF EN 303-3:1999 Chaudières de chauffage - Partie 3 : chaudières de chauffage central utilisant les combustibles gazeux. Assemblage d'un corps de chaudière et d'un brûleur à air soufflé
- NF EN ISO 4589-2:2017 Plastiques - Détermination du comportement au feu au moyen de l'indice d'oxygène - Partie 2 : essai à la température ambiante
AT-ON, Calorific value of combustion of plastic
- ONORM C 1138-1966
- ONORM EN 28030-1993 Rubber and plastics hoses for Underground mining -Methods of test for flammability (ISO 8030:1987)
- OENORM H 7510-3-2021 Checking of heating systems - Part 3: Comprehensive verification of firing systems for liquid and gaseous fuels
- OENORM H 7510-2-2021 Checking of heating systems - Part 2: Basic check of firing systems for liquid and gaseous fuels
- ONORM M 7530-1981 Room-heating appliances for liquid fuels with vaporizing burners and flue joining; requirements and terms
- ONORM M 7510-2-1996 Checking of heating Systems - Type of fuel: fuel oils or fuel gases - Part 2: Guiding values and working sheets for fireplaces up to 2 MW nominal thermal Output
ES-AENOR, Calorific value of combustion of plastic
Lithuanian Standards Office , Calorific value of combustion of plastic
- LST EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
- LST EN 15400-2011 Solid recovered fuels - Determination of calorific value
- LST EN 14918-2010 Solid biofuels - Determination of calorific value
- LST EN 1778-2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
- LST EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value (ISO 21654:2021)
- LST EN 13240-2002 Roomheaters fired by solid fuel - Requirements and test methods
- LST EN 13240-2002/A2-2004 Roomheaters fired by solid fuel - Requirements and test methods
- LST EN 13240-2002/AC-2006 Roomheaters fired by solid fuel - Requirements and test methods
- LST EN 13240-2002/A2-2004/AC-2007 Roomheaters fired by solid fuel - Requirements and test methods
- LST EN 746-2-2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
- LST EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
- LST EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
- LST EN 12809-2002 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
- LST EN 12809-2002/A1-2004 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
- LST EN 12809-2002/AC-2006 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
- LST EN 12809-2002/A1-2004/AC-2007 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
AENOR, Calorific value of combustion of plastic
- UNE-EN ISO 1716:2011 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
- UNE 51112:1985 AVIATION FUELS. ESTIMATION OF NET HEAT OF COMBUSTION
- UNE-EN 14918:2011 Solid biofuels - Determination of calorific value
- UNE-EN 15400:2011 Solid recovered fuels - Determination of calorific value
- UNE-EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
- UNE 53087-1:2002 Plastics and rubber. Determination of chlorine content. Part 1: Wickbold-combustion method.
- UNE 51123:1986 STANDARD TEST METHOD FOR HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS BY BOMB CALORIMETER
- UNE-EN 746-2:2011 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
- UNE 53127:2002 Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame.
- UNE 53993:2009 IN Plastics. Thermoplastic tanks above ground or pit installation for liquid fuels including biodiesel with flashpoint higher than 55 oC.
- UNE-EN ISO 13229:2012 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
- UNE-EN 12809:2002/A1:2005 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
Society of Automotive Engineers (SAE), Calorific value of combustion of plastic
RO-ASRO, Calorific value of combustion of plastic
- STAS 7137-1988 PL.ASTICS Determination of rigid plastics flamability by incandoseent rod method
- STAS 8887-1971 TURBO-JET-FUEL Determination of combustion heat
- STAS SR ISO 1928:1995 Solid mineral fuels Determination of gross calorific value by the calorimeter bomb method and calculation of net calorific value
- STAS 6226-1987 METAL HEATING STOVES BURING WITH SOLID FUELS General technieal requirements for quality
CZ-CSN, Calorific value of combustion of plastic
- CSN 65 6169-1986 Liquid fuels. Determination of gross and net heat of combustion
- CSN 34 7021-2-1995 Test on gases evolved during the combustion of electric cables Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
- CSN 64 5464-1978 Cellulav plastics and cellular rubber atcrials. Laboratory method of test to ssess the horizontál burning haracleristics
- CSN 06 1980 Z1-1999
GOSTR, Calorific value of combustion of plastic
- GOST 34210-2017 Petroleum fuels. Determination of the heat of combustion in calorimetric bomb
- GOST R 58440-2019 Middle distillate fuels. Determination of derived cetane number using a constant volume combustion chamber with direct fuel injection
RU-GOST R, Calorific value of combustion of plastic
- GOST 34194-2017 Aviation fuels. Estimation of net heat of combustion
- GOST 147-2013 Solid mineral fuel. Determination of gross calorific value and calculation of net calorific value
- GOST 33106-2014 Solid biofuel. Determination of calorific value
- GOST 33108-2014 Solid recovered fuel. Determination of calorific value
- GOST R 56025-2014 Building materials. Test method of heat of combustion
- GOST R 55851-2013 Gas burners, gas/oil burner and pulverized solid fuel/gas burners of steam and hot-water boilers. Acceptance test. Basis requirements
- GOST R 8.927-2016 State system for ensuring the uniformity of measurements. Solid mineral fuels. Gross and net calorific value. Accuracy parameters
- GOST R ISO 9239-1-2014 Reaction to fire tests for floorings. Method for determination of the burning behavior using a radiant heat source
Japanese Industrial Standards Committee (JISC), Calorific value of combustion of plastic
- JIS K 7201-2:2007 Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
- JIS K 7201-3:2008 Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
- JIS K 7340:2006 Plastics -- Vertical flame spread determination for film and sheet
- JIS K 7241:2005 Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame
- JIS K 7241:2023 Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame
- JIS C 3666-2:2002 Test on gases evolved during combustion of electric cables -- Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
- JIS Z 7302-2:1999 Densified refuse derived fuel -- Part 2: Test method for gross calorific value
- JIS K 7341:2006 Plastics -- Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
- JIS K 6269:1998 Testing method of flammability using the oxygen index method for rubber, vulcanized or thermoplastic
ES-UNE, Calorific value of combustion of plastic
- UNE-EN ISO 1716:2021 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018)
- UNE-EN ISO 18125:2018 Solid biofuels - Determination of calorific value (ISO 18125:2017)
- UNE-EN 17155:2019 Liquid petroleum products - Determination of indicated cetane number (ICN) of middle distillate fuels - Primary reference fuels calibration method using a constant volume combustion chamber
- UNE-EN 16715:2016 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
German Institute for Standardization, Calorific value of combustion of plastic
- DIN EN ISO 1716:2018-10 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018); German version EN ISO 1716:2018
- DIN 51857:1997 Gaseous fuels and other gases - Calculation of calorific value, density, relative density and Wobbe index of pure gases and gas mixtures
- DIN EN ISO 18125:2017 Solid biofuels - Determination of calorific value (ISO 18125:2017)
- DIN EN ISO 18125:2017-08 Solid biofuels - Determination of calorific value (ISO 18125:2017); German version EN ISO 18125:2017
- DIN 25463-1:1990 Decay heat power in nuclear fuels of light water reactors; non-recycled nuclear fuels
- DIN 51900:2022-06 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value / Note: Date of issue 2022-05-06*Intended as replacement for DIN 51900-1 (2000-04), DIN 51900-1 Berichtigung 1 (20...
- DIN EN 2310:1991 Aerospace series; test methods for the flame resistance rating of non-metallic materials; german version EN 2310:1991
- DIN EN ISO 21654:2020 Solid recovered fuels - Determination of calorific value (ISO/DIS 21654:2019); German and English version prEN ISO 21654:2019
- DIN EN 15250 Berichtigung 1:2015-05 Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007, Corrigendum to DIN EN 15250:2007-06
- DIN EN 15250:2007-06 Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007 / Note: DIN 18840 (2005-08) remains valid alongside this standard until 2007-09-01.*To be replaced by DIN EN 15250 (2012-10).
- DIN 18894:2005 Fireplaces fired by solid fuel - Woodpellet-fired independent heaters - Requirements, testing and marking
- DIN EN ISO 2578:1998-10 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
- DIN 25463-1 Bb.1:1990 Decay heat power in nuclear fuels of light water reactors; non-recycled nuclear fuels; documentation and illustration
- DIN EN 15400:2011 Solid recovered fuels - Determination of calorific value; German version EN 15400:2011
- DIN EN 17155:2018 Liquid petroleum products - Determination of indicated cetane number (ICN) of middle distillate fuels - Primary reference fuels calibration method using a constant volume combustion chamber
- DIN EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
- DIN EN 16715:2015 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
- DIN EN 17155:2018-09 Liquid petroleum products - Determination of indicated cetane number (ICN) of middle distillate fuels - Primary reference fuels calibration method using a constant volume combustion chamber; German version EN 17155:2018
- DIN 51900-3:2005 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket
- DIN 18230-2:1999 Structural fire protection in industrial buildings - Part 2: Determination of combustion behaviour of materials in storage arrangement - Combustion factor m
- DIN EN 746-2:2011-02 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems; German version EN 746-2:2010 / Note: To be replaced by DIN EN 746-2 (2020-03), DIN EN ISO 13577-2 (2021-11).
- DIN EN ISO 9773:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003
- DIN EN 16715:2015-10 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection; German ver...
- DIN 51900-3:2005-01 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket / Note: To be replaced by DIN 51900 (2022-06).
- DIN 51900-1:2000-04 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods / Note: To be replaced by DIN 51900 (2022-06).
- DIN EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value (ISO 21654:2021); German version EN ISO 21654:2021
- DIN EN 12809:2005 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods; German version EN 12809:2001 + A1:2004
- DIN 4102-14:1990 Fire behaviour of building materials and elements; determination of the burning behaviour of floor covering systems using a radiant heat source
- DIN EN 15195:2007 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber; English version of DIN EN 15195:2007-08
- DIN 51900-2:2003-05 Testing of solid and liquid fuels - Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value - Part 2: Method using isoperibol ot static, jacket calorimeter / Note: To be replaced by DIN 51900 (2022-...
- DIN EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014); German version EN ISO 15791-1:2013
- DIN 51900-1:2000 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods
Underwriters Laboratories (UL), Calorific value of combustion of plastic
- UL 1975-1990 Fire tests for foamed plastics used for decorative purposes
- UL 1975-1996 Fire tests for foamed plastics used for decorative purposes
- UL 462-1993 UL Standard for Safety Heat Reclaimers for Gas-, Oil-, or Solid Fuel-Fired Appliances Second Edition; Reprint with Revisions Through and Including November 3, 2006
- UL 1370-2011 Unvented alcohol fuel burning decorative heating appliances
- UL 1887-2004 UL Standard for Safety Fire Test of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics Third Edition
- UL 307A BULLETIN-2011 UL Standard for Safety Liquid Fuel-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles
- UL 307A BULLETIN-2012 UL Standard for Safety Liquid Fuel-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles
- UL 307A BULLETIN-2009 UL Standard for Safety Liquid Fuel-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles
BE-NBN, Calorific value of combustion of plastic
British Standards Institution (BSI), Calorific value of combustion of plastic
- BS EN ISO 1716:2010 Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value)
- BS EN ISO 21654:2021 Solid recovered fuels. Determination of calorific value
- BS EN ISO 25762:2012 Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
- BS EN ISO 1716:2018 Tracked Changes. Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value)
- BS DD CEN/TS 14918:2005 Solid Biofuels — Method for the determination of calorific value
- BS DD CEN/TS 15400:2006 Solid recovered fuels - Methods for the determination of calorific value
- BS DD CEN/TS 14918:2006 Solid biofuels - Method for the determination of calorific value
- BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products. General guidance
- BS 3378:1986 Specification for roomheaters burning solid mineral fuels
- 19/30369419 DC BS EN ISO 21654. Solid recovered fuels. Determination of calorific value
- 20/30389844 DC BS ISO 1928. Solid mineral fuels. Determination of gross calorific value
- BS ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
- BS EN 50267-2-2:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of
- BS EN 50267-2-3:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity
- BS 7420:1991 Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)
- BS 5946:1980 Method of test for determination of the punking behaviour of phenol-formaldehyde foam
- BS EN 746-2:2010 Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems
- PAS 5420:2023 Liquid fuels. Sustainable bioliquid fuels for use in fixed combustion applications for heating, hot water and cooking. Specification
- BS ISO 9772:2012 Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flam
- BS ISO 9772:2020 Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame
- BS ISO 27547-1:2010 Plastics. Preparation of test specimens of thermoplastic materials using mouldless technologies. General principles, and laser sintering of test specimens
- BS EN 17155:2018 Liquid petroleum products. Determination of indicated cetane number (ICN) of middle distillate fuels. Primary reference fuels calibration method using a constant volume combustion chamber
- BS 476-15:1993 Fire tests on building materials and structures - Method for measuring the rate of heat release of products
- BS 2782-1 Method 140A:1992 Methods of testing plastics. Thermal properties. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
- BS EN 746-2:1997 Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems
- BS ISO 30021:2013 Plastics. Burning behavior. Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
- BS EN ISO 9773:1999 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
- 20/30388665 DC BS ISO 9772. Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame
- BS 476-11:1982 Fire tests on building materials and structures - Method for assessing the heat emission from building materials
- BS EN 16715:2015 Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
- BS EN 15195:2007 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
- BS EN ISO 2578:1993 Plastics - Determination of the time-temperature limits after prolonged exposure to heat
- BS 1846-2:1968 Glossary of terms relating to solid fuel burning equipment - Industrial water heating and steam raising installations
- 20/30403636 DC BS EN 746-2. Industrial thermoprocessing equipment. Part 2. Safety requirements for combustion and fuel handling systems
American National Standards Institute （ANSI), Calorific value of combustion of plastic
- ANSI/DASMA 107-2012 Room Fire Test Standard for Garage Doors Using Foam Plastic Insulation
- ANSI/ASTM D5025:1999 Specification for a Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials (08.03)
- ANSI/ASTM D635:1998 Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position (08.01)
- ANSI/ASHRAE Standard 41.13-2023 Standard Methods for Fuel Higher Heating Value Measurement
- ANSI/UL 2523-2013 Standard for Safety for Solid Fuel-Fired Hydronic Heating Appliances, Water Heaters, and Boilers
- ANSI/ASTM D5207:1998 Practice for Calibration of 20 and 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials (08.03)
- ASTM D2863-23 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
- ANSI/UL 307A-1997 Standard for Safety for Liquid Fuel-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles
海关总署, Calorific value of combustion of plastic
- SN/T 3125-2021 Determination of heat of combustion of liquid hydrocarbon fuels by bomb calorimeter method
GM Europe, Calorific value of combustion of plastic
- GME 14012-2008 Thermoplastic Tubing for Hot Diesel Fuel Lines (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14587.)
Korean Agency for Technology and Standards (KATS), Calorific value of combustion of plastic
- KS M 3030-2002 DETERMINATION OF FLAMMABILITY AND BURNING RATE OF PLASTICS IN THE FORM OF FILM
- KS M ISO 10840:2013 Plastics — Guidance for the use of standard fire tests
- KS M ISO 10840:2004 Plastics-Guidance for the use of standard fire tests
- KS M ISO 18125:2021 Solid biofuels — Determination of calorific value
- KS M ISO 12992:2006 Plastics－Vertical flame spread determination for film and sheet
- KS M ISO 4589-1-2002(2017) Plastics－Determination of burning behaviour by oxygen index－Part 1：Guidance
- KS M 3047-2018 Methods for the analysis of evolved gases concentration by burning of plastics
- KS M ISO 9772:2018 Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
- KS B ISO 10774:2005 Solid fuelled heaters-Test method for determining allowable clearances from combustible surfaces
- KS B ISO 10774:2013 Solid fuelled heaters－Test method for determining allowable clearances from combustible surfaces
- KS M ISO 4589-3-2002(2017) Plastics－Determination of burning behaviour by oxygen index－Part 3：Elevated－temperature test
- KS M ISO 9773:2011 Plastics-Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
- KS M ISO 4589-2:2016 Plastics－Determination of burning behaviour by oxygen index－Part 2：Ambient-temperature test
- KS M ISO 4589-2-2016(2021) Plastics－Determination of burning behaviour by oxygen index－Part 2：Ambient-temperature test
- KS M ISO 9773:2016 Plastics－Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
- KS C IEC 60754-2:2003 Test on gases evolved during combustion of electric cables-Part 2:Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
- KS M ISO 9773-2016(2021) Plastics－Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
- KS M ISO 9772:2011 Cellular plastics-Determination of horizontal burning characteristics of small specimens subjected to a small flame
- KS M ISO 9772:2013 Cellular plastics ㅡ Determination of horizontal burning characteristics of small specimens subjected to a small flame
- KS M ISO 2578:2007 Plastics－Determination of time－temperature limits after prolonged exposure to heat
TH-TISI, Calorific value of combustion of plastic
- TIS 2249-2005 Plastics.guidance for the use of standard fire tests
CEN - European Committee for Standardization, Calorific value of combustion of plastic
European Committee for Standardization (CEN), Calorific value of combustion of plastic
- EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value (ISO 21654:2021)
- EN 15400:2011 Solid recovered fuels - Determination of calorific value
- EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
- EN 17155:2018 Liquid petroleum products - Determination of indicated cetane number (ICN) of middle distillate fuels - Primary reference fuels calibration method using a constant volume combustion chamber
- EN 16715:2015 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
- EN 746-2:1997 Industrial Thermoprocessing Equipment - Part 2: Safety Requirements for Combustion and Fuel Handling Systems Remains Current
- prEN 746-2-1992 Industrial thermoprocessing equipment; part 2: safety requirements for combustion and fuel handling systems
- EN ISO 15791-1:2013 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance
- EN ISO 4589-3:1996 Plastics - Determination of Burning Behaviour by Oxygen Index - Part 3: Elevated-Temperature Test ISO 4589-3: 1996
KR-KS, Calorific value of combustion of plastic
- KS M ISO 18125-2021 Solid biofuels — Determination of calorific value
- KS M ISO 9772-2018 Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
- KS M ISO 4589-2-2016 Plastics－Determination of burning behaviour by oxygen index－Part 2：Ambient-temperature test
- KS M ISO 9773-2016 Plastics－Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
Association of German Mechanical Engineers, Calorific value of combustion of plastic
- DVS 2205-1-1974 Calculation of containers and apparatuses of thermoplastics; characteristic values
- DVS 2205-1-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values
- DVS 2205-1-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values
- DVS 2205-1-2015
- DVS 2205-1-2014
- DVS 2205-1 Beiblatt 2-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polypropylene material group
- DVS 2205-1 Beiblatt 2-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polypropylene material group
- DVS 2205-1-2002 Design calculations for containers and apparatus made from thermoplastics - Characteristic Values
- DVS 2205-1-1987 Design calculations for containers and apparatus made from thermoplastics - Characteristic values
- DVS 2205-1 Beiblatt 6-2008
- DVS 2205-1 Beiblatt 3-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyvinyl chloride material group
- DVS 2205-1 Beiblatt 3-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyvinyl chloride material group
- DVS 2205-1 Beiblatt 1-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyethylene material group
- DVS 2205-1 Beiblatt 4-2012 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the fluoropolymer material group
- DVS 2205-1 Beiblatt 4-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the fluoropolymer material group
- DVS 2205-1 Beiblatt 4-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the fluoropolymer material group
国家市场监督管理总局、中国国家标准化管理委员会, Calorific value of combustion of plastic
- GB/T 2408-2021 Plastics—Determination of burning characteristics—Horizontal and vertical test
- GB/T 40302-2021 Plastics—Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
ZA-SANS, Calorific value of combustion of plastic
- SANS 1928:1995 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value
- SANS 74-2:2003 Industrial thermoprocessing equipment Part 2: Safety requirements for combustion and fuel handling systems
Group Standards of the People's Republic of China, Calorific value of combustion of plastic
- T/CCAS 018-2021 Determination of calorific value of low thermal value raw fuel for cement
- T/CPCIF 0194-2022 The anti-blooming test of powder flame retardants in thermoplastics
CH-SNV, Calorific value of combustion of plastic
Professional Standard - Electricity, Calorific value of combustion of plastic
- DL/T 568-1995 Fast test methods for ultimate analysis of fuel by infrared absorption & thermal conductivity
NL-NEN, Calorific value of combustion of plastic
- NEN 1974-1986 Solid mineral fuels - Calculation of the hydrogen content and the net calorific value from the volatile matter content and the gross calorific value
PT-IPQ, Calorific value of combustion of plastic
- NP 3359-1988 Plastics Evaluation of fire response of rigid cellular plastics using a small comer configuration
Standard Association of Australia （SAA）, Calorific value of combustion of plastic
- AS 2122.1:1993 Combustion characteristics of plastics - Determination of flame propagation - Surface ignition of vertically oriented specimens of cellular plastics
- AS 2122.3:1993 Combustion characteristics of plastics - Determination of smoke-release - Cellular polyurethanes and polyisocyanurates
FI-SFS, Calorific value of combustion of plastic
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Calorific value of combustion of plastic
- GB/T 34692-2017 Thermoplastic elastomer—Determination of halogen—Oxygen bomb combustion-ion chromatography
NZ-SNZ, Calorific value of combustion of plastic
- AS/NZS 4886:2007 Domestic solid fuel burning appliance- Pellet heaters-Determination of flue gas emission
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Calorific value of combustion of plastic
- ASHRAE 4168-1998 The Knitted Metal Fiber Burner: A New Generation of Surface Combustion Material for Radiant Heat and Low NOx Applications
IN-BIS, Calorific value of combustion of plastic
EU/EC - European Union/Commission Legislative Documents, Calorific value of combustion of plastic
- 92/42/EEC CORR-2009 Council Directive on Efficiency Requirements for New Hot-Water Boilers Fired with Liquid or Gaseous Fuels
Canadian Standards Association (CSA), Calorific value of combustion of plastic
- CSA ISO 18125:2021 Solid biofuels - Determination of calorific value (Adopted ISO 18125:2017, first edition, 2017-04)
International Electrotechnical Commission (IEC), Calorific value of combustion of plastic
- IEC 60754-2:1991 Test on gases evolved during combustion of electric cables; part 2: determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
European Committee for Electrotechnical Standardization（CENELEC）, Calorific value of combustion of plastic
- HD 602 S1-1992 Test on Gases Evolved During Combustion of Materials from Cables Determination of Degree of Acidity (Corrosivity) of Gases by Measuring pH and Conductivity
YU-JUS, Calorific value of combustion of plastic
- JUS Z.C8.027-1980 Cellular plastic and rubber materials. Laboratory method oftest to assess the horizontal burning charac- teristics when subjected to a smallflame.