ZH
RU
ES

Styrene UV Peak

Styrene UV Peak, Total:119 items.

In the international standard classification, Styrene UV Peak involves: Rubber, Plastics, Construction materials, Electrical wires and cables, Rubber and plastics products, Protection of and in buildings, Vocabularies, Burners. Boilers, Materials and articles in contact with foodstuffs, Raw materials for rubber and plastics, Semiconducting materials.

Military Standard of the People's Republic of China-General Armament Department, Styrene UV Peak

GJB 3639-1999 Determination of Benzene Chloroacetophenone UV Spectrophotometry
GJB 3639-1999(XG1-2015) Determination of Benzene Chloroacetophenone UV Spectrophotometry Modification Sheet 1-2015

GM North America, Styrene UV Peak

GM GM9739P-1988 UV Stabilizer Content of Polyvinyl Chloride
GM GMP.PE.058-1998 Polyethylene - Medium Density, UV Stable, Injection Molding Grade
GM GMP.PE.013-1991 Polyethylene - Medium Density, UV Stabilized, Blow Molding Grade
GM GMP.TES.004-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A73, Interior, UV Stabilized, Integrally Colored
GM GMP.PE.012-1997 Polyethylene - Low Density, UV Stabilized, Blow Molding Grade (Revision B)
GM GMP.SAN.001-2011 SAN - UV Stabilized, Clear (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.PE.063-1991 Polyethylene - Low Density, Homopolymer, Inj. Molded, UV Stable
GM GMP.TES.003-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A73, Interior, Non-UV Stabilized
GM GMP.TES.005-2002 Thermoplastic Elastomer Styrene Block Copolymer, Shore A59, Interior, Non-UV Stable
GM GMN7304-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A70, Interior/Exterior
GM GMP.TES.013-2003 Thermoplastic Elastomer Styrene Block Copolymer, Shore A60, Interior/Exterior
GM GMP.TES.027-2004 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A70, Interior/Exterior, Integrally Colored
GM GMN7303-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A85, Interior/Exterior
GM GMN7396-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A85, Interior/Exterior
GM GMP.TES.026-2003 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A90, Interior/Exterior
GM GMP.PVC.023-2011 PVC - 70 Shore A, UV Stabilized, Integral Colored, Injection Molding Compound (Issue 3; Do Not Use on New Programs; Replaced by GMW16080)
GM GMP.PVC.037-2011 PVC - 80 Shore A, UV Stabilized, Integral Colored, Injection Molding Compound (Issue 2; Do Not Use on New Programs; Replaced by GMW16080)
GM GMP.TES.025-2003 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A80, Interior/Exterior, Integrally Colored
GM GMP.TES.025-2013 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A80, Interior/Exterior, Integrally Colored (Issue 2; Do Not Use on New Programs; No Replacement)

US-AAMA, Styrene UV Peak

AAMA 304-2007 Voluntary Specification for Acrylonitrile-Butadiene-Styrene(ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends

(U.S.) Ford Automotive Standards, Styrene UV Peak

FORD WSS-M4D833-B2-2014 ACRYLONITRILE STYRENE ACRYLATE (ASA), MOLDED IN COLOR, MOLDING COMPOUND, EXTERIOR, NON UV-STABLE, GENERIC BLACK ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D483-A1-2000 ABS, MEDIUM IMPACT-COLOR PIGMENTED - LOW GLOSS - UV STABILIZED - INTERIOR
FORD WSS-M4D833-B1-2013 ACRYLONITRILE STYRENE ACRYLATE (ASA), EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D690-A-2005 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, UV STABILIZED, LOW GLOSS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D833-B1-2014 ACRYLONITRILE STYRENE ACRYLATE (ASA), MOLDED IN COLOR, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D833-A-2013 ACRYLONITRILE STYRENE ACRYLATE (ASA), MEDIUM HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D483-A2-2000 ABS, MEDIUM IMPACT-HEAT RESISTANT - COLOR PIGMENTED - LOW GLOSS - UV STABILIZED INTERIOR Shown on ESB-M4D483-A1 [Replaced: FORD ESF-M4D73-A]
FORD WSS-M4D792-B1-2013 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND, HIGH HEAT RESISTANT, INTERIOR / EXTERIOR LIGHTING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D833-A2-2011 ACRYLONITRILE STYRENE ACRYLATE (ASA) MOLDING COMPOUND, EXTERIOR HIGH GLOSS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D682-A7-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE (ASA+PC) MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D682-A3-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), MEDIUM HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D833-B1-2021 ACRYLONITRILE STYRENE ACRYLATE (ASA), MOLDED IN COLOR, MOLDING COMPOUND, LOW GLOSS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D833-B1-2017 ACRYLONITRILE STYRENE ACRYLATE (ASA), MOLDED IN COLOR, MOLDING COMPOUND, LOW GLOSS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D871-A5-2021 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65A DUROMETER HARDNESS, INTERIOR, LOW GLOSS, UV STABILIZED ***TO BE USED WITH FORD M99P1111-A***
FORD WSB-M4D833-A-2006 ACRYLONITRILE STYRENE ACRYLATE (ASA), MEDIUM HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ** TO BE USED WITH WSS-M99P1111-A **
FORD WSS-M4D682-A5-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), VERY HIGH HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M1P47-D-2008 BRIGHT DECORATIVE ELECTROPLATING, OVER ABS, PPO, OR MINERAL FILLED NYLON - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D950-A1-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU)/ ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D682-A7-2008 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE (ASA+PC) MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D792-A3-2008 ABS, HIGH HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D894-A3-2006 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA), 10 % GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M4D894-A1)
FORD WSK-M4D895-A3-2006 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA), 20% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M4D895-A1)
FORD WSK-M4D896-A3-2006 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA), 30 % GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M4D896-A1)
FORD WSB-M1P83-B2-2008 ELECTROPLATING, BRIGHT OR LOW GLOSS DECORATIVE OVER ABS OR PPO PLASTIC - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSB-M1P83-B1)
FORD WSS-M1P83-C2-2008 ELECTROPLATING, BRIGHT OR LOW GLOSS DECORATIVE FINISH OVER ABS PC/ABS OR FILLED NYLON - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1P83-C1)
FORD WSS-M2D505-A2-2003 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 60 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D505-A3-2003 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 70 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D505-A4-2003 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 75 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D505-A5-2003 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 90 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D505-A7-2013 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 49 DUROMETER A HARDNESS, EXTERIOR WEATHERABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D505-A7-2020 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 49 DUROMETER A HARDNESS, EXTERIOR WEATHERABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D876-A3-2009 ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M4D876-A1)
FORD WSS-M4D906-B2-2012 ACRYLONITRILE BUTADIENE STYRENE (ABS) EXTRUSION MOLDING COMPOUND, MEDIUM HEAT RESISTANT, EXTERIOR, PAINTED APPLICATIONS ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M1P83-B4-2008 ELECTROPLATING, BRIGHT OR LOW GLOSS DECORATIVE OVER ABS, PPO OR MINERAL FILLED NYLON - INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSB-M1P83-B1)
FORD WSS-M4D879-A3-2010 POLYCARBONATE + POLYETHYLENE TEREPHTHALATE BLEND (PC + PET) MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D682-A3-2005 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), MEDIUM HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D871-A5-2006 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65A DUROMETER HARDNESS, INTERIOR, LOW GLOSS, UV STABILIZED **TO BE USED WITH FORD M99P1111-A***
FORD WSS-M2D517-A2-2014 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 50 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D517-A2-2020 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 50 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D474-A2-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER, 60 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1P83-D2-2008 ELECTROPLATING, BRIGHT OR LOW GLOSS DECORATIVE FINISH WSS-M1P83-D2 OVER ABS - EXTERIOR, LOW TEMPERATURE APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D504-A-2003 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 57 DUROMETER A HARDNESS, INTERIOR OR EXTERIOR WEATHERABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D505-A-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER, 40 DUROMETER D HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D685-A-2008 ABS + POLYCARBONATE BLEND (ABS+PC) MEDIUM IMPACT STRENGTH MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

IT-UNI, Styrene UV Peak

UNI 7691-1977

Hebei Provincial Standard of the People's Republic of China, Styrene UV Peak

DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method

Group Standards of the People's Republic of China, Styrene UV Peak

T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/GDWCA 0085-2022 Ultraviolet light irradiation cross-linked polyethylene insulating compounds for wires and cables
T/ZZB 1215-2019 Polyethylene spirally enwound structure and double-flat wall pipes with UV-resist and crack-resist
T/LNJC 001-2018 Technical Regulations for External Exterior Insulation Engineering of Inorganic isolation Segregation polystyrene insulation board
T/SCDA 064-2021 FS Inorganic Composite Polystyrene Thermal Insulation Decorative Board External Wall External Thermal Insulation System Building Structure
T/SCDA 108-2022 Application technical standard of CQ graphite polystyrene external wall thermal insulation integrated system

Beijing Provincial Standard of the People's Republic of China, Styrene UV Peak

DB11/T 345-2006 Polystyrene boand with Metal Network For Extemal Themal Insulation

国家发展和改革委员会, Styrene UV Peak

JC/T 993-2005 Expanded polystyrene board plaster for external wall insulation

General Motors Corporation (GM), Styrene UV Peak

GM 9984179-2003 Moldable Paint Film on Acrylonitrile Butadiene Styrene (ABS) Film For Exterior Parts Revision C

RO-ASRO, Styrene UV Peak

STAS 11146-1985 EXPANDED POLYSTYRENE SHELLS FOR SEALING OF REFRIGERATING PIPES

(U.S.) Plastic Pipe Association, Styrene UV Peak

PPI TN-47-2013 POLYETHYLENE RESIN TESTING REQUIREMENTS TO SUPPORT ASTM D2513 UV EXPOSURE LIMITS OF POLYETHYLENE COMPOUND
PPI TN-33-2004 Standard Ultraviolet (UV) Radiation Exposure Method for Crosslinked Polyethylene (PEX) Tubing

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Styrene UV Peak

GB/T 26540-2011 EPS board with metal network for exterior insulation and finish systems
GB/T 35772-2017 Rapid detection of phthalate esters in polyvinyl chloride products—Infra-red spectrometric method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Styrene UV Peak

GB 26540-2011 EPS board with metal network for exterior insulation and finish systems
GB/T 30595-2014(英文版) External thermal insulation composite systems based on extruded polystyrene
GB/T 14423-1993 Analysis of water used in boiler and cooling system. 2-Mercaptobenzothiazole. Ultraviolet spectrophotometry

国家市场监督管理总局、中国国家标准化管理委员会, Styrene UV Peak

GB/T 40918-2021 General technical requirements of polystyrene wood-imitation plastic board for outdoor application
GB/T 40722.2-2021 Styrene-butadiene rubber(SBR)—Determination of the microstructure of solution-polymerized SBR—Part 2:FTIR with ATR method

Professional Standard - Building Materials, Styrene UV Peak

JC/T 993-2006 Expanded polystyrene boards base coat for external thermal insulation

Jilin Provincial Standard of the People's Republic of China, Styrene UV Peak

DB22/T 5011-2018 Engineering technical standard for external wall insulation of molded polystyrene foam board

GM Global, Styrene UV Peak

GMW 16233-2012 Thermoplastic Elastomers ?Styrenic, Exterior Issue 3; English

国家质量监督检验检疫总局, Styrene UV Peak

SN/T 4383-2015 Determination of polyvinyl alcohol (PVA) content in glutinous rice paper, food contact materials, by UV-visible spectrophotometry

German Institute for Standardization, Styrene UV Peak

DIN 55699:2017-08 Application and processing of external thermal insulation composite systems (ETICS) with insulation of expanded polystyrene (EPS) or mineral wool (MW)
DIN EN 13499:2003 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification; German version EN 13499:2003
DIN EN 13499:2003-12 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification; German version EN 13499:2003 / Note: To be replaced by DIN EN 17237 (2018-06).

American Society for Testing and Materials (ASTM), Styrene UV Peak

ASTM D8496-23 Standard Test Method for Determination of Hydroquinone (HQ) Content in Vinyl Acetate Monomer (VAM) Using Ultraviolet-Visible (UV-Vis) Spectrophotometer
ASTM E2430/E2430M-13 Standard Specification For Expanded Polystyrene (ldquo;EPSrdquo;) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (ldquo;EIFSrdquo;)
ASTM E2430-05(2013) Standard Specification For Expanded Polystyrene (ldquo;EPSrdquo;) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (ldquo;EIFSrdquo;)
ASTM E2430-05 Standard Specification For Expanded Polystyrene ("EPS") Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems ("EIFS")
ASTM E2430/E2430M-13(2018) Standard Specification for Expanded Polystyrene (“EPS”) Thermal Insulation Boards for Use in Exterior Insulation and Finish Systems (“EIFS”)
ASTM E2430/E2430M-19 Standard Specification for Expanded Polystyrene (“EPS”) Thermal Insulation Boards for Use in Exterior Insulation and Finish Systems (“EIFS”)
ASTM F1620-96 Standard Practice for Calibrating a Scanning Surface Inspection System Using Monodisperse Polystyrene Latex Spheres Deposited on Polished or Epitaxial Wafer Surfaces

Shandong Provincial Standard of the People's Republic of China, Styrene UV Peak

DB37/T 5126-2018 Inorganic material composite polystyrene grade A thermal insulation board thin plaster exterior wall external thermal insulation system application technical specification

British Standards Institution (BSI), Styrene UV Peak

BS EN 13499:2003 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification
BS EN ISO 6402-2:1995 Plastics - Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials - Preparation of test specimens and determination of properties
BS ISO 6402-1:1995 Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials. Designation
BS EN ISO 6402-1:1997 Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials. Designation system and basis for specifications
BS EN ISO 6402-1:2002 Plastics - Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials - Designation system and basis for specifications

AT-ON, Styrene UV Peak

ONORM B 6123-1988 Final coat for outer wall thermal insulation Systems with adhesion power fabricated of polystyrene particle foam and thin-wall plaster; marking of conformity
ONORM B 6110-1998 External thermal insulating composite Systems (ETICS) with rendering based on expanded polystyrene foam EPS-F - Marking of conformity

Association Francaise de Normalisation, Styrene UV Peak

NF EN 13499:2004 Produits isolants thermiques pour bâtiments - Systèmes composites d'isolation thermique par l'extérieur à base de polystyrène expansé (ETICS) - Spécification
NF P75-425*NF EN 13499:2004 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification
NF T52-134:1979 Plastics. Basic materials for polyurethanes. Determination of the ratio of 2,4 and 2,6 isomers in the toluylene diisocyanate by infra-red spectroscopy.

Danish Standards Foundation, Styrene UV Peak

DS/EN 13499:2004 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification

Lithuanian Standards Office , Styrene UV Peak

LST EN 13499-2004 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification

AENOR, Styrene UV Peak

UNE-EN 13499:2004 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification

Canadian General Standards Board （CGSB), Styrene UV Peak

CGSB 1-GP-71 METH 143.4-1978 Methodes D'Essai Des Peintures Et Pigments Resistance A Long Terme A L'Exterieur Essai D'Une Couche De Peinture-Email Mate (Aux Resines Alkydes Styrenees) Appliquee Sur De L'Acier

International Organization for Standardization (ISO), Styrene UV Peak

ISO 6402-2:1994 Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties

Japanese Industrial Standards Committee (JISC), Styrene UV Peak

JIS K 6876-1:1999 Plastics -- Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials -- Part 1: Designation system and basis for specifications
JIS K 6876-2:1999 Plastics -- Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials -- Part 2: Preparation of test specimens and determination of properties