ZH
RU
ES
Styrene UV
Styrene UV, Total:500 items.
In the international standard classification, Styrene UV involves: Rubber, Raw materials for rubber and plastics, Plastics, Construction materials, Electrical wires and cables, Rubber and plastics products, Organic chemicals, Analytical chemistry, Protection of and in buildings, Air quality, Vocabularies, Road engineering, Petroleum products in general, Pipeline components and pipelines, Products of the textile industry, Burners. Boilers, Food products in general, Materials and articles in contact with foodstuffs, Fuels, Adhesives, Optics and optical measurements, Environmental protection, Geology. Meteorology. Hydrology, Wastes, Cellular materials, General methods of tests and analysis for food products.
Military Standard of the People's Republic of China-General Armament Department, Styrene UV
- GJB 3639-1999 Determination of Benzene Chloroacetophenone UV Spectrophotometry
- GJB 3639-1999(XG1-2015) Determination of Benzene Chloroacetophenone UV Spectrophotometry Modification Sheet 1-2015
GM North America, Styrene UV
- GM GM9739P-1988 UV Stabilizer Content of Polyvinyl Chloride
- GM GMP.SAN.001-2011 SAN - UV Stabilized, Clear (Issue 2; Do Not Use on New Programs; No Replacement)
- GM GMP.PE.012-1997 Polyethylene - Low Density, UV Stabilized, Blow Molding Grade (Revision B)
- GM GMP.PE.058-1998 Polyethylene - Medium Density, UV Stable, Injection Molding Grade
- GM GMP.PE.013-1991 Polyethylene - Medium Density, UV Stabilized, Blow Molding Grade
- GM GMP.TES.004-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A73, Interior, UV Stabilized, Integrally Colored
- GM GMP.TES.003-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A73, Interior, Non-UV Stabilized
- GM GMP.TES.005-2002 Thermoplastic Elastomer Styrene Block Copolymer, Shore A59, Interior, Non-UV Stable
- GM GMP.PE.063-1991 Polyethylene - Low Density, Homopolymer, Inj. Molded, UV Stable
- GM GM9311P-1988 Screen Analysis of Polystyrene Beads
- GM GM9740P-1988 Acrylonitrile, Styrene and Butadiene Compositions in ABS Polymers
- GM GMN7304-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A70, Interior/Exterior
- GM GMP.TES.013-2003 Thermoplastic Elastomer Styrene Block Copolymer, Shore A60, Interior/Exterior
- GM GMP.E/P.070-1996 Polyolefin Alloy - 20% Mineral Filled, UV Stable
- GM GM6065M-1986 Polystyrene Plastic Molding Compounds Replaced by GM7001M
- GM GMP.E/P.075-1997 Polyolefin Alloy - 440 MPa Flexural Modulus, UV Stabilized
- GM GMP.PP.026-1994 Polypropylene - 25% Mineral Filled, UV Stabilized, Copolymer
- GM GMP.PP.096-1998 Polypropylene - High Heat, High Crystalline, UV Stabilized Copolymer
- GM GMN7303-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A85, Interior/Exterior
- GM GMN7396-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A85, Interior/Exterior
- GM GMP.TES.026-2003 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A90, Interior/Exterior
- GM GM9312P-1988 Total Moisture Content of Polystyrene Beads and Pellets
- GM GM2770M-1993 Exterior Grade Vinyl - Optional Heat Transfer
- GM GMP.TES.027-2004 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A70, Interior/Exterior, Integrally Colored
- GM GMP.PVC.023-2011 PVC - 70 Shore A, UV Stabilized, Integral Colored, Injection Molding Compound (Issue 3; Do Not Use on New Programs; Replaced by GMW16080)
- GM GMP.PVC.037-2011 PVC - 80 Shore A, UV Stabilized, Integral Colored, Injection Molding Compound (Issue 2; Do Not Use on New Programs; Replaced by GMW16080)
- GM GMP.E/P.096-2004 Polyolefin Alloy - MPa Flex Mod, UV Stabilized, High Flow
- GM GMP.PP.067-1996 Polypropylene - 13% Talc Filled, Heat Resistant, UV Stable Copolymer
PL-PKN, Styrene UV
- PN C89068-1961 Polystyrene. Deferminafion of ?he S?yrene-con?en?s
- PN C89112-01-1992 Plastics. Acrylonitryle/butadiene/styene (ABS) moulding and extrusion materials. Designation
- PN C89416-1990 Plastics Determination of resistance of polystyrene and styrene copolymers to attack by trichlorofluoromethane
- PN C89062-1959
- PN Z04152-05-1993 Air purity protection. Tests for styrene content. Determination of styrene in ambient air (imission) by gas chromatography
- PN O79783-1986 Plastics packages Moulders from expanded polystyrene
- PN T90336-1992 Local quad unit type filled cables with polyethylene insulation and moisture barrier polyethylene sheath,unarmoured or armoured with polyethylene or polyvinylchloride outer covering
US-AAMA, Styrene UV
- AAMA 304-2007 Voluntary Specification for Acrylonitrile-Butadiene-Styrene(ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends
(U.S.) Ford Automotive Standards, Styrene UV
- FORD ESB-M4D483-A1-2000 ABS, MEDIUM IMPACT-COLOR PIGMENTED - LOW GLOSS - UV STABILIZED - INTERIOR
- FORD WSS-M4D833-B2-2014 ACRYLONITRILE STYRENE ACRYLATE (ASA), MOLDED IN COLOR, MOLDING COMPOUND, EXTERIOR, NON UV-STABLE, GENERIC BLACK ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D833-B1-2013 ACRYLONITRILE STYRENE ACRYLATE (ASA), EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D690-A-2005 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, UV STABILIZED, LOW GLOSS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESK-M2G269-A-1988 ADHESIVE STYRENE BUTADIENE, HOT MELT, FILLED
- FORD WSS-M4D833-B1-2014 ACRYLONITRILE STYRENE ACRYLATE (ASA), MOLDED IN COLOR, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M4D483-A2-2000 ABS, MEDIUM IMPACT-HEAT RESISTANT - COLOR PIGMENTED - LOW GLOSS - UV STABILIZED INTERIOR Shown on ESB-M4D483-A1 [Replaced: FORD ESF-M4D73-A]
- FORD WSS-M4D833-A2-2011 ACRYLONITRILE STYRENE ACRYLATE (ASA) MOLDING COMPOUND, EXTERIOR HIGH GLOSS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D833-A-2013 ACRYLONITRILE STYRENE ACRYLATE (ASA), MEDIUM HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D792-B1-2013 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND, HIGH HEAT RESISTANT, INTERIOR / EXTERIOR LIGHTING ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D682-A7-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE (ASA+PC) MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD SJ-M4D9745-A-1994 POLYPROPYLENE, 20% GLASS SPHERE FILLED, UV- STABILIZED, EXTERIOR
- FORD WSS-M4D682-A5-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), VERY HIGH HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D682-A3-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), MEDIUM HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D833-B1-2021 ACRYLONITRILE STYRENE ACRYLATE (ASA), MOLDED IN COLOR, MOLDING COMPOUND, LOW GLOSS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D833-B1-2017 ACRYLONITRILE STYRENE ACRYLATE (ASA), MOLDED IN COLOR, MOLDING COMPOUND, LOW GLOSS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D871-A5-2021 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65A DUROMETER HARDNESS, INTERIOR, LOW GLOSS, UV STABILIZED ***TO BE USED WITH FORD M99P1111-A***
- FORD WSB-M4D833-A-2006 ACRYLONITRILE STYRENE ACRYLATE (ASA), MEDIUM HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ** TO BE USED WITH WSS-M99P1111-A **
Hebei Provincial Standard of the People's Republic of China, Styrene UV
- DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method
International Organization for Standardization (ISO), Styrene UV
- ISO/PRF 3136 Rubber latex — Styrene-butadiene — Determination of bound styrene content
- ISO 2453:1975 Styrene-butadiene copolymers — Determination of bound styrene content
- ISO 3136:2023 Rubber latex — Styrene-butadiene — Determination of bound styrene content
- ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
- ISO 2561:2006 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
- ISO 2561:2012 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
- ISO 2561:1974 Plastics; Determination of residual styrene monomer in polystyrene by gas chromatography
- ISO 2897:1976 Plastics — Designation of impact-resistant polystyrenes
- ISO 21561-1:2015 Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR - Part 1: 1H-NMR and IR with cast-film method
- ISO 3136:1975 Title missing - Legacy paper document
- ISO 3136:1983 Rubber latex; Styrene-butadiene; Determination of bound styrene content
- ISO 5478:1980 Rubber — Determination of styrene content — Nitration method
- ISO 5478:2006 Rubber - Determination of styrene content - Nitration method
- ISO 5478:1990 Rubber; determination of styrene content; nitration method
- ISO 4655:1977 Rubber — Reinforced styrene-butadiene latex — Determination of total bound styrene content
- ISO 2058:1973
- ISO 2008:1987 Rubber latex, styrene-butadiene; Determination of volatile unsaturates
- ISO 727-2:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based series
- ISO 727-1:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1: Metric series
- ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
- ISO 727-2:2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based series
- ISO 7246:1984 Pipes and fittings of acrylonitrile/styrene/ acrylester (ASA); General specification for moulding and extrusion materials
IT-UNI, Styrene UV
TR-TSE, Styrene UV
- TS 2610-1977 STYRENE - BUTEDIEN COPOLYMERS - DETERMINATION OF BOUND STYRENE CONTENT
- TS 2492-1977 PLASTICS DETERMINATION OF RESIDUAL STYRENE MONOMER ?N POLYSTYRENE BY GAS CHROMATOGRAPHY
- TS 3487-1980 RAW STYRENE BUTADIENE RUBBER (SBR) — DETERMINATION OF VOLATILE MATTER
- TS 3486-1980 ?RAW STYRENE — BUTADIENE RUBBER (SBR) — DETERMINATION OF SOAP CONTENT-
- TS 3485-1980 RAW STYKENE — BUTADIENE RUBBER — DETE MINATION OF ORGANIC ACID CONTENT.
- TS 146-1964 PLASTICS DETERMINATION OF METHANOL-SOLUBLE MATTER ?N POLYSTYRENE
- TS 2845-1977 Styrene Butadiene Rubber Latices - Determination Of Volatile Unsaturates And Residual Styrene
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Styrene UV
- GB/T 16867-1997 Determination of residual styrene monomer in polystyrene and acrylonitrile-butadiene-styrene resins by gas chromatography
- GB/T 4614-1984 Determination of residual styrene monomer in polystyrene by gas chromatography
- GB 26540-2011 EPS board with metal network for exterior insulation and finish systems
- GB/T 30595-2014(英文版) External thermal insulation composite systems based on extruded polystyrene
- GB/T 14571.4-2008 Ethylene glycol for industrial use.Determination of ultraviolet transmittance.Ultraviolet spectrophotometric method
- GB/T 16055-1995 Workplace air--Determination of diphenyl-diphenyl ether--Ultraviolet spectrophotometric method
- GB/T 8658-1998 Rubber, raw styrene-butadiene, emulsion-polymerized--Determination of bound styrene content--Refractive index method
- GB/T 14423-1993 Analysis of water used in boiler and cooling system. 2-Mercaptobenzothiazole. Ultraviolet spectrophotometry
- GB/T 17338-1998 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for food packaging
- GB/T 5009.152-2003 Determination of residual acrylonitrile monomer in styrene--acrylonitrile copolymers and rubber--modified acrylonitrile--butadiene--styrene resins and their products used for food packaging
- GB/T 30914-2014 Styrene-isoprene-butadiene rubber(SIBR).Determination of the microstructure
- GB/T 5009.60-1996 Method for analysis of hygienic standard of products of polyethylene, polystyrene and polypropyrene for food packaging
- GB/T 5009.60-2003 Method for analysis of hygienic standard of products of polyethylene,polystyrene and polypropyrene for food packaging
- GB/T 14677-1993 Air quality. Determination of toluene, dimethyl benzene and styrene. Gas chromatography
- GB/T 8657-2000 Rubber,raw styrene-butadiene-Determination of soap and organic-acid content
- GB/T 8657-2014 Styrene-butadiene rubber, raw.Determination of soap and organic-acid content
- GB/T 14670-1993 Air quality. Determination of styrene. Gas chromatography
- GB/T 12688.2-1990 Styrene for industrial use--Determination of purity--Crystallizing point method
- GB/T 28728-2012 Determination of the microstructure of solution-polymerized SBR
- GB/T 12688.5-1990 Styrene for industrial use--Determination of content of total aldehydes--Titrimetric method
- GB/T 13646-2013 Rubber.Determination of bound styrene content.Spectrophotometric method
AR-IRAM, Styrene UV
Group Standards of the People's Republic of China, Styrene UV
- T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
- T/GDWCA 0085-2022 Ultraviolet light irradiation cross-linked polyethylene insulating compounds for wires and cables
- T/ZZB 1215-2019 Polyethylene spirally enwound structure and double-flat wall pipes with UV-resist and crack-resist
- T/LNJC 001-2018 Technical Regulations for External Exterior Insulation Engineering of Inorganic isolation Segregation polystyrene insulation board
- T/SCDA 064-2021 FS Inorganic Composite Polystyrene Thermal Insulation Decorative Board External Wall External Thermal Insulation System Building Structure
- T/SCDA 108-2022 Application technical standard of CQ graphite polystyrene external wall thermal insulation integrated system
- T/CPPIA 6-2021 Determination of Hexabromocyclododecane in Expanded Polystyrene and Extruded Polystyrene--Gas Chromatography-Mass Spectrometry
- T/FSI 059-2020 Determination of phenyl and vinyl contents in phenyl silicone gum (HNMR method)
RO-ASRO, Styrene UV
General Motors Corporation (GM), Styrene UV
- GM 9984179-2003 Moldable Paint Film on Acrylonitrile Butadiene Styrene (ABS) Film For Exterior Parts Revision C
(U.S.) Plastic Pipe Association, Styrene UV
- PPI TN-47-2013 POLYETHYLENE RESIN TESTING REQUIREMENTS TO SUPPORT ASTM D2513 UV EXPOSURE LIMITS OF POLYETHYLENE COMPOUND
- PPI TN-33-2004 Standard Ultraviolet (UV) Radiation Exposure Method for Crosslinked Polyethylene (PEX) Tubing
Korean Agency for Technology and Standards (KATS), Styrene UV
- KS M ISO 3136:2009 Rubber latex－Styrene-butadiene－Determination of bound styrene content
- KS M ISO 4655:2009 Rubber－Reinforced styrene-butadiene latex－Determination of total bound styrene content
- KS M ISO 2561-2013(2018) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
- KS M ISO 2561:2013 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
- KS M ISO 2561:2003 Plastics-Determination of residual styrene monomer in polystyrene(PS) and inpact-resistant polystyrene(PS-I) by gas chromatography
- KS M 3011-1990(2001) TESTING METHODS FOR POLYSTYRENES
- KS M 3011-1985 TESTING METHODS FOR POLYSTYRENES
- KS M 3806-1998(2003) RECYCLED FOAM POLYSTYRENE AGGREAGATE
- KS M 3807-2003 Recycled foam polystyrene thermal insulation material
- KS M ISO 3136-2009(2019) Rubber latex－Styrene-butadiene－Determination of bound styrene content
- KS M ISO 5478:2010 Rubber－Determination of styrene content－Nitration method
- KS A 1513-1996
- KS M ISO 4655-2009(2014) Rubber－Reinforced styrene-butadiene latex－Determination of total bound styrene content
- KS M ISO 5478-2010(2015) Rubber－Determination of styrene content－Nitration method
- KS M 2231-2010 Testing method for naphthalene type hydrocarbon contents in aviation turbine fuels by ultraviolet spectrophotometry
- KS M 2231-1980 Testing method for naphthalene type hydrocarbon contents in aviation turbine fuels by ultraviolet spectrophotometry
- KS M 3360-2001 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS
- KS M 3368-2015(2020) High impact acrylonitrile-butadiene-styrene(ABS) fitting for water works service
- KS F 2230-1999(2014) General test conditions of polystyrene composite wood wool cement boards
- KS M ISO 727-1:2005 Fittings made from unplasticized polyvinyl chloride(PVC－U), chlorinated polyvinyl chloride(PVC－C) or acrylonitrile/ butadiene/styrene(ABS) with plain sockets for pipes under pressure－Part 1：Metric series
- KS M ISO 2453-2014(2019) Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
GM Europe, Styrene UV
American Society for Testing and Materials (ASTM), Styrene UV
- ASTM D3314-02(2021) Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
- ASTM D4026-06(2021) Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
- ASTM D4026-87(2002)e1 Standard Test Method for Rubber Latex-Styrene-Butadiene Copolymer-Determination of Residual Styrene
- ASTM D6164-05 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
- ASTM D6164-00 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
- ASTM D6164-05e1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
- ASTM D4026-06(2012) Standard Test Method for Rubber Latexmdash;Styrene-Butadiene Copolymermdash;Determination of Residual Styrene
- ASTM D6164/D6164M-21 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
- ASTM D4026-06 Standard Test Method for Rubber Latex8212;Styrene-Butadiene Copolymer8212;Determination of Residual Styrene
- ASTM E2193-16 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
- ASTM D6163-00 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
- ASTM D6162-00a(2008) Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
- ASTM D6163-00(2008) Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
- ASTM D6163/D6163M-16 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
- ASTM D6164/D6164M-16 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
- ASTM D2827-04 Standard Specification for Styrene Monomer
- ASTM D2827-00 Standard Specification for Styrene Monomer
- ASTM D2827-12 Standard Specification for Styrene Monomer
- ASTM D2827-12a Standard Specification for Styrene Monomer
- ASTM D2827-19 Standard Specification for Styrene Monomer
- ASTM D2827-08 Standard Specification for Styrene Monomer
- ASTM D2827-13 Standard Specification for Styrene Monomer
- ASTM D2121-07 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
- ASTM D5775-95(2023) Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index
- ASTM D6164/D6164M-11 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
- ASTM D4026-06(2017) Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
- ASTM D4549-03 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
- ASTM D2121-00 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
- ASTM D4549-00 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
- ASTM D6298/D6298M-16(2023) Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
- ASTM D3314-02(2012) Standard Test Method for Rubbermdash;Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
- ASTM D6163-00e2 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
- ASTM D6163/D6163M-21 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
- ASTM D6163-00e1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
- ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM D3314-02(2006) Standard Test Method for Rubber-Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
- ASTM D3314-02 Standard Test Method for Rubber-Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
- ASTM D3314-02(2017) Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
- ASTM D6865-04 Standard Classification System for Acrylonitrile-Styrene-Acrylate (ASA) and Acrylonitrile-EPDM-Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
- ASTM D6163/D6163M-00(2015)e1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
- ASTM D6367-04 Standard Specification for AMS (alpha-Methylstyrene)
- ASTM D6367-99 Standard Specification for AMS (alpha-Methylstyrene)
- ASTM D6367-04(2008) Standard Specification for AMS (x03B1;-Methylstyrene)
- ASTM D6367-21 Standard Specification for AMS (α-Methylstyrene)
- ASTM D6367-16 Standard Specification for AMS (α-Methylstyrene)
- ASTM D6367-17 Standard Specification for AMS (&x3b1;-Methylstyrene)
- ASTM D6298-05 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
- ASTM D6298-05e1 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
- ASTM D2680-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
- ASTM D2680-95a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
- ASTM D2680-01(2009) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
- ASTM D2680-20 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
- ASTM D6298-00 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheet with a Factory Applied Metal Surface
- ASTM E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
- ASTM D6162-00ae1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
- ASTM D6162/D6162M-21 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
- ASTM D6298-13 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
- ASTM D6162/D6162M-00A(2015)e1 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
- ASTM D2119-96 Standard Test Method for Aldehydes in Styrene Monomer
- ASTM D6298/D6298M-16 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
- ASTM D3160-20 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene)
- ASTM D3160-16 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α&x2013;Methylstyrene)
- ASTM D2680-01(2014) Standard Specification for Acrylonitrile-Butadiene-Styrene &40;ABS&41; and Poly&40;Vinyl Chloride&41; &40;PVC&41; Composite Sewer Piping
- ASTM D4549-11 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
- ASTM D2751-77ae1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe And Fittings
- ASTM D2282-99 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
- ASTM D2282-99e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
- ASTM F2969-12 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
- ASTM F2969-12(2020) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
- ASTM D6162/D6162M-16 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
- ASTM D6162-00a Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
- ASTM UOP913-92 Impurities in Styrene by Gas Chromatography
- ASTM D6367-12 Standard Specification for AMS (alpha;-Methylstyrene)
- ASTM D2119-19 Standard Test Method for Aldehydes in Styrene Monomer
- ASTM D4549-15(2021) Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
- ASTM D4549-15 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
- ASTM D8496-23 Standard Test Method for Determination of Hydroquinone (HQ) Content in Vinyl Acetate Monomer (VAM) Using Ultraviolet-Visible (UV-Vis) Spectrophotometer
- ASTM D3138-04(2011) Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
- ASTM D6865-17 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Ex
- ASTM F2806-10(2015) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
- ASTM F2806-20 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
- ASTM F1055-11 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
- ASTM D4590-22 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry
- ASTM D4590-06 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha-Methylstyrene) by Spectrophotometry
- ASTM D3314-92(1997) Standard Test Method for Rubber-Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
- ASTM D3644-06 Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins
- ASTM C578-12b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-11b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM D1017-51(1978)e1 Test Method for Benzene and Toluene in 250F and Lighter Petroleum Products by Ultraviolet Spectrophotometry
- ASTM D2683-10e3 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
- ASTM F1055-12 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
- ASTM F1055-13 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
- ASTM E2430/E2430M-13 Standard Specification For Expanded Polystyrene (ldquo;EPSrdquo;) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (ldquo;EIFSrdquo;)
- ASTM E2430-05(2013) Standard Specification For Expanded Polystyrene (ldquo;EPSrdquo;) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (ldquo;EIFSrdquo;)
- ASTM F1055-16a Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
- ASTM D3160-96a Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (alpha-Methylstyrene)
- ASTM D3160-03 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (alpha-Methylstyrene)
- ASTM D2683-04 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
- ASTM D3185-06(2021) Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
- ASTM D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
- ASTM D2119-03 Standard Test Method for Aldehydes in Styrene Monomer
- ASTM D2119-09 Standard Test Method for Aldehydes in Styrene Monomer
- ASTM D4634-99 Standard Specification for Styrene-Maleic Anhydride Materials (S/MA)
- ASTM D4634-16(2022) Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
- ASTM C578-11 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM D2193-22 Standard Test Method for Hydroquinone in Vinyl Acetate
- ASTM C578-11be1 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM F1055-15 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
- ASTM E2430-05 Standard Specification For Expanded Polystyrene ("EPS") Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems ("EIFS")
- ASTM F1055-98(2006) Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
- ASTM F1055-98 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
- ASTM F1055-98e1 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
- ASTM F1055-16 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
- ASTM D3965-21 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
- ASTM F2806-10e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
- ASTM D3965-99 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
- ASTM D2235-04(2016) Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
- ASTM D3965-16 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
- ASTM D3160-07 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (alpha-Methylstyrene)
- ASTM D3160-12 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (agr;ndash;Methylstyrene)
- ASTM D3900-05 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
- ASTM D3900-05a Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
- ASTM D4275-02 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene-Vinyl Acetate (EVA) Copolymers By Gas Chromatography
- ASTM D4275-96 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene-Vinyl Acetate (EVA) Copolymers By Gas Chromatography
- ASTM D4275-09 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylenex2013;Vinyl Acetate (EVA) Copolymers By Gas Chromatography
- ASTM D2193-97(2001) Standard Test Method for Hydroquinone in Vinyl Acetate
- ASTM D2193-97 Standard Test Method for Hydroquinone in Vinyl Acetate
- ASTM D3138-04(2016) Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
- ASTM D3900-95(2000) Standard Test Methods for Rubber Raw-Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers)
- ASTM D3900-95(2004)e1 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
- ASTM C578-19 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-16 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM D6339-98 Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)
- ASTM C578-06 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM D2340-96 Standard Test Method for Peroxides in Styrene Monomer
- ASTM D2340-03 Standard Test Method for Peroxides in Styrene Monomer
- ASTM D6817/D6817M-17(2021) Standard Specification for Rigid Cellular Polystyrene Geofoam
- ASTM C578-00 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-01 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-92 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM D2340-09 Standard Test Method for Peroxides in Styrene Monomer
- ASTM C578-87a Standard Specification for Preformed, Cellular Polystyrene Thermal Insulation
- ASTM C578-18 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-12a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-04 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-95 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM D6817-13 Standard Specification for Rigid Cellular Polystyrene Geofoam
- ASTM D6817/D6817M-13a Standard Specification for Rigid Cellular Polystyrene Geofoam
- ASTM D6817/D6817M-17 Standard Specification for Rigid Cellular Polystyrene Geofoam
- ASTM C578-17 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-15 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-08 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-08a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-08b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-09 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-09e1 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM D2340-23 Standard Test Method for Peroxides in Styrene Monomer
- ASTM D2121-15 Standard Test Methods for Polymer Content of Styrene Monomer
- ASTM D2340-18 Standard Test Method for Peroxides in Styrene Monomer
- ASTM D2121-16 Standard Test Methods for Polymer Content of Styrene Monomer
- ASTM C578-11a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-12 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-13 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-14 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-14a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-15a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-15b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C578-17a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM D2340-13 Standard Test Method for Peroxides in Styrene Monomer
- ASTM D633-11(2016) Standard Volume Correction Table for Road Tar
- ASTM D7557/D7557M-09(2013)e1 Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens
- ASTM C578-23 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM E2430/E2430M-13(2018) Standard Specification for Expanded Polystyrene (“EPS”) Thermal Insulation Boards for Use in Exterior Insulation and Finish Systems (“EIFS”)
- ASTM E2430/E2430M-19 Standard Specification for Expanded Polystyrene (“EPS”) Thermal Insulation Boards for Use in Exterior Insulation and Finish Systems (“EIFS”)
- ASTM D2235-22 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
- ASTM D2683-14 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
- ASTM D4673-02(2008) Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
- ASTM D3191-10(2020) Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures
- ASTM D1768-89(1995)e1 Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
Beijing Provincial Standard of the People's Republic of China, Styrene UV
- DB11/T 345-2006 Polystyrene boand with Metal Network For Extemal Themal Insulation
国家发展和改革委员会, Styrene UV
- JC/T 993-2005 Expanded polystyrene board plaster for external wall insulation
FI-SFS, Styrene UV
RU-GOST R, Styrene UV
- GOST R 54551-2011 Rubber styrene-butadiene. Determination of bound styrene content. Refractive index method
- GOST 24654-1981 Synthetic rubbers. Method for determination of bound styrene content and alpha-methylstyrene
- GOST 22019-1985 Synthetic rubbers. Method for determination of free styrene and alpha-methyl styrene
- GOST R 52056-2003 Polymer-bitumen binders for roads on the basis of block copolymers of styrene-butadiene-styrene type. Specifications
- GOST 20282-1986 General-purpose polystyrene. Specifications
- GOST 15820-1982 Polystyrole and copolymers of styrole. Gas chromatographic method for determination of resictual monomers and non-polymerizing impurities
- GOST 24921-1981 Synthetic latexes. Determination of bound styrene content
- GOST R 51263-2012 Soncrete with polystyrene aggregates. Specifications
- GOST R 51263-1999 Concrete with polysterene aggregates. Specifications
- GOST R ISO 2507-3-2015 Thermoplastics pipes and fittings. Vicat softening temperature. Part 3. Test conditions for acrylonitrile-butadiene-stirene and acrylonitrile-styrene-acrylate pipes and fittings
- GOST R 57051-2016 Resources saving. Waste treatment. Characteristics of polystyrene recyclates
- GOST 13549-1978 Unsaturated polyester resins. Methods for determination of styrene content
Association Francaise de Normalisation, Styrene UV
- NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
- NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
- NF T46-071*NF ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method
- NF T54-420*NF EN ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods.
- NF T43-010:1983 STYRENE-BUTADIENE RUBBERS (SBR) AND OIL EXTENDED STYRENE BUTADIENE. EMULSION POLYMERISED TYPES. TEST RECIPE AND EVALUATION OF VULCANISATION CHARACTERISTICS.
- NF EN 15486:2007 Éthanol comme base de mélange à l'essence - Dosage du soufre - Méthode par fluorescence ultraviolette
- NF EN 13499:2004 Produits isolants thermiques pour bâtiments - Systèmes composites d'isolation thermique par l'extérieur à base de polystyrène expansé (ETICS) - Spécification
- NF EN ISO 2507-3:2017 Tubes et raccords en matières thermoplastiques - Température de ramollissement Vicat - Partie 3 : conditions particulières d'essai pour tubes et raccords en acrylonitrile/butadiène/styrène (ABS) et en acrylonitrile/styrène/ester acrylique (ASA)
- NF T51-006:1957 Plastics. Determination of methanol-soluble polystyrene.
- NF P75-425*NF EN 13499:2004 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification
- NF T54-024-3*NF EN ISO 2507-3:2017 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3 : test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
- NF T51-912:1980 PLASTICS. POLYSTYRENE MOULDING AND EXTRUSION MATERIALS. DETERMINATION OF PROPERTIES.
- NF ISO 2453:2020 Caoutchouc butadiène-styrène brut polymérisé en émulsion - Détermination de la teneur en styrène lié - Méthode par l'indice de réfraction
- NF T50-801*NF EN 15342:2008 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates
- NF EN 15342:2008 Plastiques - Plastiques recyclés - Caractérisation des recyclats de polystyrène (PS)
British Standards Institution (BSI), Styrene UV
- 22/30446382 DC BS ISO 3136. Rubber latex. Styrene-butadiene. Determination of bound styrene content
- BS ISO 2561:2012 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PSI) by gas chromatography
- BS ISO 21561-2:2016 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR. FTIR with ATR method
- BS ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
- 18/30358631 DC BS ISO 2453. Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
- BS ISO 21561-1:2015 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR. 1H-NMR and IR with cast-film method
- BS ISO 727-1:2002 Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Metric series
- BS EN 13499:2003 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification
- BS 7164-12:1991 Chemical tests for raw and vulcanized rubber - Determination of bound styrene content of raw styrene-butadiene rubber; emulsion polymerized: refractive index method
- BS ISO 727-2:2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Inch-based series
Danish Standards Foundation, Styrene UV
- DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- DS/EN 15486:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
- DS/EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
- DS/EN 13499:2004 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification
Lithuanian Standards Office , Styrene UV
- LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- LST EN 15486-2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
- LST EN 15342-2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
- LST EN 13499-2004 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification
AENOR, Styrene UV
- UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- UNE-ISO 2561:2014 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
- UNE-EN 15486:2008 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
- UNE-EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
- UNE-EN 13499:2004 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification
German Institute for Standardization, Styrene UV
- DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- DIN 55699:2017-08 Application and processing of external thermal insulation composite systems (ETICS) with insulation of expanded polystyrene (EPS) or mineral wool (MW)
- DIN EN ISO 2507-3:2018-01 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995); German version EN ISO 2507-3:2017
- DIN EN 13499:2003 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification; German version EN 13499:2003
- DIN EN 13499:2003-12 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification; German version EN 13499:2003 / Note: To be replaced by DIN EN 17237 (2018-06).
- DIN V 78082-2:1991 Raw materials for the rubber industry; styrene-butadiene rubber; requirements
- DIN EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; English version of DIN EN 15342:2008-02
- DIN EN 15342:2008-02 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; German version EN 15342:2007
- DIN 53742:1971 Testing of Plastics; Determination of the Vinyl Acetate Content of Copolymers of Vinyl Chloride and Vinyl Acetate; Infrared Spectrographic Method
- DIN EN ISO 2507-3:2018 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
SE-SIS, Styrene UV
CEN - European Committee for Standardization, Styrene UV
- EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
American National Standards Institute （ANSI), Styrene UV
- BS ISO 3136:2023 Rubber latex. Styrene-butadiene. Determination of bound styrene content (British Standard)
- ANSI/ASTM D4275:1991 Test Method for Determination of Butylated Hydroxytoluene (BHT) in Polymers of Ethylene and EthyleneVinyl Acetate (EVA) Copolymers by Gas Chromatography (08.03)
- ANSI/ASTM D2683:2010 Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
- ANSI/ASTM D2751:2005 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
- ANSI/ASTM F1055:2013 Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
- ANSI/ASTM D2683:2020 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
Standard Association of Australia （SAA）, Styrene UV
Japanese Industrial Standards Committee (JISC), Styrene UV
- JIS K 6869:2009 Plastics -- Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
- JIS K 6239-2:2017 Styrene-butadiene rubber(SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 2: FTIR with ATR method
- JIS K 6239-1:2017 Styrene-butadiene rubber(SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 1: 1H-NMR and IR with cast-film method
- JIS K 6875:1995 Testing methods for AS resins
- JIS K 6874:1995 Testing methods for ABS resins
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Styrene UV
- GB/T 26540-2011 EPS board with metal network for exterior insulation and finish systems
- GB/T 35772-2017 Rapid detection of phthalate esters in polyvinyl chloride products—Infra-red spectrometric method
国家市场监督管理总局、中国国家标准化管理委员会, Styrene UV
- GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography
- GB/T 40918-2021 General technical requirements of polystyrene wood-imitation plastic board for outdoor application
- GB/T 38286-2019 Polyethylene(PE)，polypropylene(PP) and polystyrene(PS) resin―Determination of peroxide value
- GB/T 39109-2020 Textiles—Determination of benzophenone ultraviolet absorbents
- GB/T 14571.4-2022 Test method of ethylene glycol for industrial use—Part 4：Determination of ultraviolet transmittance—Ultraviolet spectrophotometric method
- GB/T 40722.2-2021 Styrene-butadiene rubber(SBR)—Determination of the microstructure of solution-polymerized SBR—Part 2:FTIR with ATR method
- GB/T 36691-2018 Methyl vinyl silicone rubber—Determination of vinyl content—Near infrared spectroscopy
CZ-CSN, Styrene UV
Professional Standard - Building Materials, Styrene UV
- JC/T 993-2006 Expanded polystyrene boards base coat for external thermal insulation
Professional Standard - Commodity Inspection, Styrene UV
- SN/T 2889-2011 Food contact materials for export.Polymers.Determination of toluene ethylbenzene propylbenzene isopropylbenzene styrene and total volatile substances in polystyrene.Gas chromatography method
- SN/T 2946-2011 Determination of vinyl acetate content in ethylene-vinyl acetate copolymers by Fourier transform infrared spectroscopy
- SN 0625.2-1997 Inspection rules of imported plastic scrap as raw material.Polymer scrap of ethylene, styrene, vinyl chloride respective and others
- SN/T 0514-1995 Determination of expansion rate for import and export expandable polystyrene raw materials
- SN/T 0560.1-1996 Determination of size of expandable polystyrene raw materials for import and export
- SN/T 2408-2009 Determination of migration of 2-methoxyethylacetate,2-ethoxyethanol,2-ethoxyethyl acetate,bis(2-methoxyethyl)ether,styrene,isophorone and nitrobenzene in toys
Jilin Provincial Standard of the People's Republic of China, Styrene UV
- DB22/T 5011-2018 Engineering technical standard for external wall insulation of molded polystyrene foam board
Professional Standard - Petrochemical Industry, Styrene UV
- SH/T 1502-1992 Determination of bound styrene content in styrene-butadiene latex
- SH/T 1592-1994 Determination of bound styrene content in styrene-butadiene raw rubber by nitration method
- SH/T 1593-1994 Determination of bound styrene content in styrene-butadiene latex Nitration method
- SH/T 1502-2014 Determination of bound styrene content in styrene - butadiene rubber latex.Refractive index method
- SH/T 1539-2007 Rubber, styrene-butadiene(SBR).Determination of total extracts
- SH/T 1628.6-2014 Vinyl acetate for industrial use.Part 6: Determination of hydroquinone
- SH/T 1485.3-1995 Determination of polymer content in divinylbenzene for industrial use
- SH/T 1485.5-1995 Titration method for determination of bromine index in divinylbenzene for industrial use
YU-JUS, Styrene UV
- JUS E.L8.006-1980 Determiriation ofethanol by enzymatic method (UV-test)
- JUS G.C1.303-1996 Plastics - Determination vinylidene unsaturation in polyethylene - Infrared spectrophotometric method
HU-MSZT, Styrene UV
IL-SII, Styrene UV
- S.I.634-1967 RIGID FOAMED POLYSTYRENE FOR THERMAL INSULATION
GM Global, Styrene UV
- GMW 16233-2012 Thermoplastic Elastomers ?Styrenic, Exterior Issue 3; English
国家质量监督检验检疫总局, Styrene UV
- SN/T 4156-2015 Detection method of divinylbenzene in polystyrene plastic bags for import and export: Gas chromatography-mass spectrometry
- SN/T 4383-2015 Determination of polyvinyl alcohol (PVA) content in glutinous rice paper, food contact materials, by UV-visible spectrophotometry
- SN/T 0859-2016 Determination of dehydroacetic acid in export seasonings by UV spectrophotometry
Professional Standard - Hygiene , Styrene UV
- WS/T 241-2004 Biological Limits for Occupational Exposure to Styrene
The American Road & Transportation Builders Association, Styrene UV
- AASHTO M 264-2003(R2007) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping
- AASHTO M264-1992 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping Twentieth Edition; ASTM D2680-93 R(2000)
AASHTO - American Association of State Highway and Transportation Officials, Styrene UV
- M 264-2003 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping
- M 230-1998 Standard Specification for Extruded Foam Board (Polystyrene)
- M 264-1992 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping (Twentieth Edition; ASTM D2680-93)
- M230-1994 Standard Specification for Extruded Foam Insulation Board (Polystyrene)
- M 230-2007 Standard Specification for Expanded and Extruded Foam Board (Polystyrene)
GM Daewoo, Styrene UV
Professional Standard - Chemical Industry, Styrene UV
- HG/T 3943-2007 Poly (vinyl chloride) resin-Determination of toluene content
Electronic Industrial Alliance (U.S.), Styrene UV
- EIA 519-1986 Molded Expanded Polystyrene (EPS) Packaging Material
检验方法与规程专业（理化）, Styrene UV
- GB 31604.16-2016 National food safety standard Determination of styrene and ethylbenzene in food contact materials and products
SG-SPRING SG, Styrene UV
- SS 323 Pt.D6-1987 Methods Of Test For Flexible Plastic Packaging Materials Part D6 : Determination Of Residual Styrene Monomer In Polystyrene By Gas Chromatography
- SS 357 Pt.1-1991 SPECIFICATION FOR Cushioning Foams Part 1 : Polystyrene
Jiangsu Provincial Standard of the People's Republic of China, Styrene UV
ESDU - Engineering Sciences Data Unit, Styrene UV
- ESDU 99007-2000 Vapour pressures and critical points of liquids: Halogenated alkylbenzenes and halogenated styrenes.
- ESDU 99008-2000 Orthobaric densities and molar volumes of liquids. Halogenated alkylbenzenes and halogenated styrenes.
- ESDU 86027-1986 Vapour pressure and critical points of liquids. Part 3B: additional alkyl- and alkenylbenzenes.
AT-ON, Styrene UV
- ONORM B 6123-1988 Final coat for outer wall thermal insulation Systems with adhesion power fabricated of polystyrene particle foam and thin-wall plaster; marking of conformity
- ONORM B 6110-1998 External thermal insulating composite Systems (ETICS) with rendering based on expanded polystyrene foam EPS-F - Marking of conformity
- ONORM B 5179-1984 Pipes and fittings of acrylnitrile-butadiene-styrene (ABS) or acrylester-styrene-acrylnitrile(ASA) with sockets for hot water resistant waste and soil installations inside buildings; dimensions, technical terms of delivery, tests and marking of conformity
ES-UNE, Styrene UV
- UNE-EN ISO 2507-3:2018 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
Indonesia Standards, Styrene UV
- SNI 8143.1-2015 Cara uji residu zat kontak pangan dari kemasan pangan - Bagian 1: Residu stirena dalam kemasan pangan polistirena (PS)
Professional Standard - Agriculture, Styrene UV
- SN/T 0625.2-1997 Rules for the inspection of imported waste plastics that can be used as raw materials—waste of ethylene, styrene, vinyl chloride polymers and other polymers (for trial implementation)
Canadian General Standards Board （CGSB), Styrene UV
Professional Standard - Environmental Protection, Styrene UV
- HJ/T 31-1999 Stationary source emission.Determination of phosgene.Aniline ultraviolet spectrophotometric method
Shandong Provincial Standard of the People's Republic of China, Styrene UV
- DB37/T 5126-2018 Inorganic material composite polystyrene grade A thermal insulation board thin plaster exterior wall external thermal insulation system application technical specification
U.S. Military Regulations and Norms, Styrene UV
European Committee for Standardization (CEN), Styrene UV
- prEN 15342 rev Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
Association of German Mechanical Engineers, Styrene UV
BELST, Styrene UV
- STB 2148-2010 Factory made products of extruded polystyrene foam. Specifications