ZH
RU
ES
diameter head
diameter head, Total:200 items.
In the international standard classification, diameter head involves: Aerospace fluid systems and components, Passenger and cabin equipment, Chipless working equipment, Cutting tools, Fasteners for aerospace construction, Fasteners, Pipeline components and pipelines, Valves, Linear and angular measurements, Equipment for the chemical industry, Mining equipment.
IT-UNI, diameter head
AIA/NAS - Aerospace Industries Association of America Inc., diameter head
- NAS1581-1986 BOLT@ 100° FLUSH REDUCED HEAD (Rev 7)
- NAS1581-1984 BOLT@ 100° FLUSH REDUCED HEAD (Rev 6)
- NAS1581-1993 Bolt@ 100 Degree Flush Reduced Head (Rev 9)
- NAS5320-2006 SCREW@ SHEAR@ 100 DEG FLUSH REDUCED HEAD@ CLOSE TOLERANCE@ NAS1800 SIX LOBE RECESS@ 95 KSI FSU
- NAS5320-2012 SCREW@ SHEAR@ 100 DEG FLUSH REDUCED HEAD@ CLOSE TOLERANCE@ NAS1800 SIX LOBE RECESS@ 95 KSI FSU (Rev 1)
- NAS1581-2007 BOLT@ SHEAR@ 100 DEGREES FLUSH REDUCED HEAD@ OFFSET CRUCIFORM – RIBBED AND DOVETAIL SLOT@ 95 KSI FSU (Rev 10)
- NAS1581-2015 BOLT@ SHEAR@ 100° FLUSH REDUCED HEAD@ OFFSET CRUCIFORM@ OFFSET CRUCIFORM – RIBBED AND DOVETAIL SLOT@ 95 KSI FSU (Rev 13)
- NAS1581-2012 BOLT@ SHEAR@ 100° FLUSH REDUCED HEAD@ OFFSET CRUCIFORM@ OFFSET CRUCIFORM – RIBBED AND DOVETAIL SLOT@ 95 KSI FSU (Rev 8)
- NAS1581-2009 BOLT@ SHEAR@ 100 DEGREES FLUSH REDUCED HEAD@ OFFSET CRUCIFORM@ OFFSET CRUCIFORM – RIBBED AND DOVETAIL SLOT@ 95 KSI FSU (Rev 11)
- NAS1719-2016 RIVET@ BLIND@ 100° REDUCED FLUSH HEAD@ (NAS1097 HEAD)@ MECHANICALLY LOCKED SPINDLE (Rev 4)
- NASM83459/3-1998 Rivet@ Titanium@ Bimetal@ 95 KSI Fsu@ 100 Degree Reduced Flush Crown Head@ Type III
- NAS1719-2011 RIVET@ BLIND@ 100° REDUCED FLUSH HEAD@ (NAS1097 HEAD)@ MECHANICALLY LOCKED SPINDLE (Rev 3)
- NAS1719-1995 Rivet@ Blind@ 100 Degree Reduced Flush Head@ (NAS 1097 Head) Mechanically Locked Spindle (Rev 2)
US-FCR, diameter head
Professional Standard - Railway, diameter head
Society of Automotive Engineers (SAE), diameter head
- SAE AS5174C-2005 Fitting, Union and Reducer, Flared
- SAE AS5174D-2008 Fitting, Union and Reducer, Flared
- SAE AS17852A-2012 Reducers, Oxygen Pressure
- SAE J2122-1998 Numbering System for Single Diameter Drills
- SAE AS4328B-2006 FITTING, UNION, REDUCER, BULKHEAD, FLARED TUBE, FOR SEAL RING FSC 4730
- SAE AS1038E-2003 Fitting, Elbow, 90°, Standard and Reducer, Bulkhead, Flared
- SAE AS1040E-2003 Fitting, Elbow, 45°, Standard and Reducer, Bulkhead, Flared
- SAE MA3448-1991 Bolt, Spline Drive Special Extended Washer Head, Reduced Head, PD Shank, AMS 5708, Metric FSC 5306
- SAE AS1585C-2000 Fitting, Reducer, Integral Weld Ring, 3000 psi
- SAE AGS1108-16-1975 AGS1108 Pipe Couplings. (Aluminium Alloy) Reducing Union. (Cone to Nipple Type)
- SAE AS4686B-2003 (R) FITTING, ELBOW, 90? REDUCER, BULKHEAD, FLARELESS AND SHORT FLARELESS
- SAE AS63297-2-2004 AS63297 Safety Cable - Ø0,89mm, Reduced End Fitting
- SAE AS1034E-2003 Fitting, Elbow, 90°, Standard and Reducer, Flared
- SAE MA3449-1991 Bolt, Spline Drive Extended Washer Head, Reduced Head, Retainer Locked, PD Shank, AMS 5708, Metric FSC 5306
- SAE AS4340A-2006 Fitting, Bushing , Screw Thread Reducer, for Seal Ring
- SAE AS4340C-2015 FITTING@ BUSHING@ SCREW THREAD REDUCER@ FOR SEAL RING
- SAE AS1368B-2006 FITTING, REDUCER-EXTERNAL THREAD FLARED TUBE FOR SEAL RING FSC 4730
- SAE MA2038B-2003 (R) UNION, REDUCER, FLARELESS TUBE, METRIC
- SAE MA2038-1986 UNION, REDUCER FLARELESS TUBE
- SAE AS9847A-2012 PIN, STRAIGHT, HEADED, .3749 DIAMETER, UNS S41800
- SAE AS9845A-2012 PIN, STRAIGHT, HEADED, .2499 DIAMETER, UNS S41800
- SAE AS9848A-2012 PIN, STRAIGHT, HEADED, .49999 DIAMETER, UNS S41800
- SAE AS9847-2003 PIN, STRAIGHT, HEADED, .3749 DIAMETER, AMS 5616
- SAE AS9843A-2012 PIN, STRAIGHT, HEADED, .1249 DIAMETER, UNS S41800
- SAE AS9846A-2012 PIN, STRAIGHT, HEADED, .3124 DIAMETER, UNS S41800
- SAE AS9467A-2012 PIN, STRAIGHT, HEADED, .436 DIAMETER, CRES, UNS S66286
- SAE AS9465A-2012 PIN, STRAIGHT, HEADED, .311 DIAMETER, CRES, UNS S66286
- SAE AS9464C-2012 PIN, STRAIGHT, HEADED, .248 DIAMETER, CRES, UNS S66286
- SAE AS9845C-2020 PIN, STRAIGHT, HEADED, .2499 DIAMETER, CRES UNS S41800
- SAE AS9468-2012 PIN, STRAIGHT, HEADED, .497 DIAMETER, AMS5735
- SAE MA2116-1988 Union, Reducer, Flareless Tube or Boss
- SAE AS895C-2008 (R) FITTING, ELBOW, 45? STANDARD AND REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD
- SAE AS9468-1999 PIN, STRAIGHT, HEADED .497 DIAMETER, AMS 5735 FSC 5315
- SAE AS1004-1966 ELBOW, 90°, REDUCER FLARELESS TUBE
- SAE AS1004B-1981 ELBOW, 90°, REDUCER FLARELESS TUBE
- SAE AS1004A-1968 ELBOW, 90°, REDUCER FLARELESS TUBE
- SAE AS1004C-1987 ELBOW, 90°, REDUCER FLARELESS TUBE
- SAE AS9848-2003 PIN, STRAIGHT, HEADED, .4999 DIAMETER, AMS 5616
- SAE AS9844A-2012 PIN, STRAIGHT, HEADED, .1874 DIAMETER, UNS S41800
- SAE AS9845-2003 PIN, STRAIGHT, HEADED, .2499 DIAMETER, AMS 5616
- SAE AS9846-2003 PIN, STRAIGHT, HEADED, .3124 DIAMETER, AMS 5616
- SAE AS9843-2003 PIN, STRAIGHT, HEADED, .1249 DIAMETER, AMS 5616
- SAE AS9842-2003 PIN, STRAIGHT, HEADED, .0937 DIAMETER, AMS 5616
- SAE AS9842A-2018 PIN, STRAIGHT, HEADED, .0937 DIAMETER, UNS S41800
German Institute for Standardization, diameter head
- DIN 336:2003-07 Diameters of drills for minor diameters of tapped threads
- DIN 7632:1985 Compression couplings with spherical liner; reducers
- DIN 336:2003 Diameters of drills for minor diameters of tapped threads
- DIN EN ISO 4015:2020 Hexagon head bolts with reduced shank (shank diameter pitch diameter) - Product grade B (ISO/DIS 4015:2020); German and English version prEN ISO 4015:2020
- DIN EN 6050:2023-05 Aerospace series - Pin, close tolerance, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating - Inch series; English version prEN 6050:2023 / Note: Date of issue 2023-04-14
- DIN 11852:2000 Valves for food and chemical industries - Stainless steel fittings - Tees, bends, reducers for welding-on
- DIN 11852:2009 Fittings for the food and chemical industries - Fittings of stainless steel - Tees, bends and reducers for welding
- DIN 11865:2003 Stainless steels fittings for aseptic, chemical and pharmaceutical industries - Tees, bends, reducers for welding on
- DIN 11865:2012 Stainless steels fittings for aseptic, chemical and pharmaceutical industry - Tees, elbows and reducers for welding on
- DIN 65433:2002 Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with reduced countersunk head
- DIN EN 6069:2020-09 Aerospace series - Rivet, 100° reduced countersunk head, close tolerance - Inch series; German version ASD-STAN prEN 6069:2020 / Note: Date of issue 2020-07-31*Intended as replacement for DIN EN 6069 (2011-02).
- DIN EN ISO 4015:2022-10 Fasteners - Hexagon head bolts with reduced shank (shank diameter <ca> pitch diameter) - Product grade B (ISO 4015:2022); German version EN ISO 4015:2022
- DIN 21614:1990 Auxiliary ventilation for mining; flanged sheet metal reducers
International Organization for Standardization (ISO), diameter head
- ISO 9181:1990 Tools for pressing; round punches with 60° conical head and reduced shank
- ISO 9181:2007 Tools for pressing - Round punches with 60° conical head and reduced shank
SAE - SAE International, diameter head
- SAE J2122-2019 Numbering System for Single Diameter Drills
- SAE J2122-1990 NUMBERING SYSTEM FOR STANDARD DRILLS
- SAE J2122-1994 Numbering System for Single Diameter Drills
- SAE AS4686A-1994 Fitting@ Elbow@ 90 Degree@ Reducer@ Bulkhead@ Flareless and Short Flareless
- SAE AS4686C-2013 (R) FITTING, ELBOW, 90? REDUCER, BULKHEAD, FLARELESS AND SHORT FLARELESS
- SAE AS4686D-2017 FITTING@ ELBOW@ 90°@ REDUCER@ BULKHEAD@ FLARELESS AND SHORT FLARELESS
- SAE AS4340B-2006 FITTING@ BUSHING@ SCREW THREAD REDUCER@ FOR SEAL RING
- SAE AS4340-1993 Bushing - Screw Thread Reducer@ for Seal Ring
- SAE MA2038A-1992 Union@ Reducer@ Flareless Tube@ Metric (FSC 4730)
- SAE AS9843-1998 Pin@ Straight@ Headed@ .1249 Diameter@ AMS 5616
- SAE AS9847-1998 Pin@ Straight@ Headed@ .3749 Diameter@ AMS 5616
- SAE AS9846-1998 Pin@ Straight@ Headed@ .3124 Diameter@ AMS 5616
- SAE AS9848-1998 Pin@ Straight@ Headed@ .4999 Diameter@ AMS 5616
- SAE AS9845B-2018 PIN@ STRAIGHT@ HEADED .2499 DIAMETER@ UNS S41800
- SAE AS9846A-2004 PIN, STRAIGHT, HEADED, .3124 DIAMETER, UNS S41800
- SAE AS9845A-2004 PIN, STRAIGHT, HEADED, .2499 DIAMETER, UNS S41800
- SAE AS9847A-2004 PIN, STRAIGHT, HEADED, .3749 DIAMETER, UNS S41800
- SAE AS9847B-2019 PIN@ STRAIGHT@ HEADED@ .3749 DIAMETER@ UNS S41800
- SAE AS9843B-2018 PIN@ STRAIGHT@ HEADED@ .1249 DIAMETER@ UNS S41800
- SAE AS9848B-2019 PIN@ STRAIGHT@ HEADED@ .49999 DIAMETER@
- SAE AS9846B-2019 PIN@ STRAIGHT@ HEADED@ .3124 DIAMETER@ UNS S41800
- SAE AS9467-1999 Pin@ Straight@ Headed@ .436 Diameter@ AMS 5735 (FSC 5315)
- SAE AS9465-1999 Pin@ Straight@ Headed@ .311 Diameter@ AMS 5735 (FSC 5315)
- SAE AS9467A-2002 PIN, STRAIGHT, HEADED, .436 DIAMETER, CRES, UNS S66286
- SAE AS9465B-2018 PIN@ STRAIGHT@ HEADED@ .311 DIAMETER@ CRES@ UNS S66286
- SAE AS9467B-2018 PIN@ STRAIGHT@ HEADED@ .436 DIAMETER@ CRES@ UNS S66286
- SAE AS9468A-2018 PIN@ STRAIGHT@ HEADED .497 DIAMETER@ AMS5735
- SAE AS9842-1998 Pin@ Straight@ Headed@ .0937 Diameter@ AMS 5616
- SAE AS9842A-2004 PIN, STRAIGHT, HEADED, .0937 DIAMETER, UNS S41800
- SAE AS9844A-2004 PIN, STRAIGHT, HEADED, .1874 DIAMETER, UNS S41800
- SAE AS1004G-2017 ELBOW, 90°, REDUCER FLARELESS TUBE
- SAE AS1004E-2001 ELBOW, 90°, REDUCER FLARELESS TUBE
- SAE AS9844B-2018 PIN@ STRAIGHT@ HEADED@ .1874 DIAMETER@ UNS S41800
Professional Standard - Aerospace, diameter head
CZ-CSN, diameter head
Professional Standard - Machinery, diameter head
PL-PKN, diameter head
Japanese Industrial Standards Committee (JISC), diameter head
- JIS B 1001:1985 Diameter of clearance holes and counterbores for bolts and screws
Professional Standard - Construction Industry, diameter head
British Standards Institution (BSI), diameter head
- BS ISO 9181:2007 Tools for pressing - Round punches with 60 ° conical head and reduced shank
- 23/30471635 DC BS EN 6050. Aerospace series. Pin, close tolerance, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating. Inch series
- BS EN 6069:2010 Aerospace series. Rivet, 100° reduced flush head, close tolerance. Inch series
- BS EN 6069:2009 Aerospace series - Rivet, 100 ° reduced flush head, close tolerance - Inch series
American Society of Mechanical Engineers (ASME), diameter head
RU-GOST R, diameter head
- GOST 24073-1980 Reduce tube connections with cut ring. Construction
- GOST 24493-1980 Tee reducing tube connections with ball nipple. Construction
- GOST 13961-1974 Reduce-type unions for tube connections on external cone. Construction and dimensions
Professional Standard - Aviation, diameter head
Association Francaise de Normalisation, diameter head
Korean Agency for Technology and Standards (KATS), diameter head
KR-KS, diameter head
- KS B ISO 8020-2016 Tools for pressing ― Punches with cylindrical head and straight or reduced shank
GM North America, diameter head
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, diameter head
International Federation of Trucks and Engines, diameter head
CU-NC, diameter head
European Committee for Standardization (CEN), diameter head
- FprEN ISO 4015:2021 Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) - Product grade B (ISO/FDIS 4015:2021)
- FprEN ISO 4016:2021 Fasteners - Hexagon head bolts with reduced shank (shank diameter ~ pitch diameter) - Product grade B (ISO/FDIS 4016:2021)
- EN 6069:2009 Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
Aerospace, Security and Defence Industries Association of Europe (ASD), diameter head
- ASD-STAN PREN 4562-2000 Aerospace Series Pipe Coupling, Welded, in Heat Resisting Steel Reductors Inch Series (Edition P 1)
- ASD-STAN PREN 4182-1994 Aerospace Series Pipe Coupling 8 Degrees 30' in Titanium Alloy Tee, Reduced (Edition P 1)
RO-ASRO, diameter head
- STAS 8804/4-1992 Non-alloy and alloy steel butt-welding fittings - Reducing elbows Dimensions
- STAS 9984-1974 BORING HEADS, "WITH RADIAL FEED Dimensions
Taiwan Provincial Standard of the People's Republic of China, diameter head
ES-UNE, diameter head
- UNE-EN ISO 4015:2023 Fasteners - Hexagon head bolts with reduced shank (shank diameter ˜ pitch diameter) - Product grade B (ISO 4015:2022)
Military Standard of the People's Republic of China-General Armament Department, diameter head
Professional Standard - Chemical Industry, diameter head
- HG/T 21573.2-1995 High pressure bolts and bolt hydraulic tightening devices Large diameter studs
Aerospace Industries Association/ANSI Aerospace Standards, diameter head
YU-JUS, diameter head
- JUS M.B6.724-1985 Tube fittingsandunionswith indenting ferrule. Reducing nipple. Shape and dimensions