ZH
RU
ES
Diameter
Diameter, Total:239 items.
In the international standard classification, Diameter involves: Pipeline components and pipelines, Rubber and plastics products, Equipment for the chemical industry, Surface treatment and coating, Fluid power systems, Aerospace fluid systems and components, External water conveyance systems, Fasteners, Valves, Linear and angular measurements, Medical equipment, Materials for aerospace construction, Equipment for the metallurgical industry, Shipbuilding and marine structures in general, Materials for the reinforcement of composites, Mining equipment, Protection against fire, Non-destructive testing, Electrical accessories, Equipment for petroleum and natural gas industries, Chipless working equipment, Gears, Installations in buildings.
Taiwan Provincial Standard of the People's Republic of China, Diameter
FI-SFS, Diameter
YU-JUS, Diameter
IT-UNI, Diameter
Liaoning Provincial Standard of the People's Republic of China, Diameter
Group Standards of the People's Republic of China, Diameter
- T/CI 028-2022 4 mm small diameter tube-fin stainless steel heat exchanger
- T/GDCKCJH 044-2021 On-site test methods for diameter and roundness of expanded pipe
- T/GDAQI 110-2023 Test method for inner diameter of tracheal tubes
- T/CSEE 0335-2022 Technical Guidelines for Ultrasonic Surface Wave Detection of Small-diameter Pipes in Dense Pipe Discharge in Power Stations
Society of Automotive Engineers (SAE), Diameter
- SAE AS4133C-2019 TEE, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
- SAE AS4133D-2019 TEE, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
- SAE AS4136D-2019 CROSS, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
- SAE AS4409B-2012 Fitting Assembly, Elbow 45°, Reducer and Nonreducer, Internal Flare to Flared Tube
- SAE AS130A-2013 TUBE BENDING RADIUS
- SAE AS33611-2015 TUBE BEND RADII
- SAE AS4406-2007 FITTING ASSEMBLY, UNION, REDUCER AND NONREDUCER, INTERNAL FLARE
- SAE AS4406B-2023 FITTING ASSEMBLY, UNION, REDUCER AND NONREDUCER, INTERNAL FLARE
- SAE AS4411A-2011 Fitting Assembly, Tee, Reducer and Nonreducer, Internal Flare on Side to Flared Tube
- SAE AS4408-2007 FITTING ASSEMBLY, ELBOW 90°, REDUCER AND NONREDUCER, INTERNAL FLARE
- SAE AS4408C-2023 FITTING ASSEMBLY, ELBOW 90°, REDUCER AND NONREDUCER, INTERNAL FLARE
- SAE AS4409A-2011 Fitting Assembly, Elbow 45°, Reducer and Nonreducer, Internal Flare to Flared Tube
- SAE AS4696A-2009 Fitting, Sleeve, Flareless, Nonreducer and Reducer, Short Acorn to Weld Tube End
- SAE AS5230-1998 Fitting, Union and Reducer, Flareless
- SAE AS4410C-2023 FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON RUN TO FLARED TUBE
- SAE AS4410-2007 FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON RUN, TO FLARED TUBE
- SAE AS4409C-2023 FITTING ASSEMBLY, ELBOW 45°, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
- SAE AS4409-2007 FITTING ASSEMBLY, ELBOW 45°, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
- SAE AS4407-2007 FITTING ASSEMBLY, ELBOW 90°, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
- SAE AS4405B-2023 FITTING ASSEMBLY, ADAPTER, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
- SAE AS4405-2007 FITTING ASSEMBLY, ADAPTER, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
- SAE AS4407B-2020 FITTING ASSEMBLY, ELBOW 90°, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
- SAE AS4407C-2023 FITTING ASSEMBLY, ELBOW 90°, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
- SAE AS4411C-2023 FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON SIDE TO FLARED TUBE
- SAE AS95-2013 FITTING ASSEMBLY, CROSS, REDUCER AND NONREDUCER, INTERNAL FLARE ON ONE END, TO FLARED TUBE
- SAE AS95A-2023 FITTING ASSEMBLY, CROSS, REDUCER AND NON-REDUCER, INTERNAL FLARE ON ONE END, TO FLARED TUBE
- SAE AS4408A-2011 Fitting Assembly, Elbow 90°, Reducer and Nonreducer, Internal Flare
- SAE AS896A-1993 Fitting, Nipple, Reducer, Flareless Tube to Pipe, External Thread
- SAE AS896B-1995 Fitting, Nipple, Reducer, Flareless Tube to Pipe, External Thread
- SAE AS4132C-2019 ELBOW, 90°, BULKHEAD, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
- SAE RS-444-3-1977 RS444 Dimensions of Threads not included in B.S.2779 (5/16" and 7/16" Pipe Diameters)
- SAE AS4411-2007 FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER INTERNAL FLARE ON SIDE TO FLARED TUBE
- SAE AS4410A-2011 Fitting Assembly, Tee, Reducer and Nonreducer, Internal Flare on Run, to Flared Tube
- SAE AS4135C-2019 TEE, BULKHEAD ON SIDE, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
- SAE AS4135D-2019 TEE, BULKHEAD ON SIDE, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
- SAE AS4134D-2019 TEE, BULKHEAD ON RUN, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
- SAE AS4134C-2016 TEE, BULKHEAD ON RUN, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
- SAE AS4134E-2019 TEE, BULKHEAD ON RUN, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
- SAE AS6230A-2020 FITTING, 37° INTERNAL FLARE TO TUBE WELD, STRAIGHT AND REDUCER
- SAE AS85421/5C-2015 FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN AND, BRANCH, SWIVEL NUT ON RUN
- SAE AS5174E-2015 FITTING, UNION AND REDUCER, FLARED
- SAE AS5174F-2020 FITTING, UNION AND REDUCER, FLARED
- SAE AS5230-2004 FITTING, UNION AND REDUCER, FLARELESS
- SAE AS85421/5D-2022 FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN AND BRANCH, SWIVEL NUT ON RUN
- SAE AS1035A-1968 REDUCER TEE - FLARED TUBE
- SAE AS1036A-1968 REDUCER CROSS - FLARED TUBE
- SAE AS1036-1962 REDUCER CROSS - FLARED TUBE
- SAE AS1035-1962 REDUCER TEE - FLARED TUBE
- SAE AS1035B-1983 TEE, REDUCER, FLARED TUBE
- SAE AS1036B-1983 CROSS, REDUCER, FLARED TUBE
- SAE AS6044A-2012 Fitting, Elbow 90 Degree, Standard and Reducer, Flareless, Precision type
- SAE AS1005F-2005 FITTING, TEE, STANDARD AND REDUCER, FLARELESS
- SAE AS1040B-1983 ELBOW, 45° REDUCER, FLARED TUBE
- SAE AS1040A-1968 REDUCER BULKHEAD ELBOW 45° - FLARED TUBE
- SAE AS1040-1962 REDUCER BULKHEAD ELBOW 45° - FLARED TUBE
- SAE AS85421/4E-2022 FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN, SWIVEL NUT ON BRANCH
- SAE AS85421/4C-2015 FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN, SWIVEL NUT ON BRANCH
- SAE AS85421/4F-2022 FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN, SWIVEL NUT ON BRANCH
- SAE AS1034E-2007 FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARED
- SAE AS1034G-2020 FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARED
- SAE AS33611-1997 Tube Bend Radii
- SAE MA2008-2015 Radii-Tube Bend, Metric
- SAE AS1010-1966 ELBOW, 45° REDUCER, FLARELESS TUBE
- SAE AS1010B-1981 ELBOW, 45° REDUCER, FLARELESS TUBE
- SAE AS1010A-1968 ELBOW, 45° REDUCER, FLARELESS TUBE
- SAE AS1010C-1987 ELBOW, 45° REDUCER, FLARELESS TUBE
- SAE AS21916C-2007 REDUCER, EXTERNAL THREAD, FLARELESS TUBE
- SAE AS21916D-2015 REDUCER, EXTERNAL THREAD, FLARELESS TUBE
- SAE AS1005-2011 TEE, REDUCER, FLARELESS TUBE
- SAE AS1005C-1985 TEE, REDUCER, FLARELESS TUBE
- SAE AS1005B-1981 TEE, REDUCER, FLARELESS TUBE
- SAE AS1005A-1968 TEE, REDUCER, FLARELESS TUBE
- SAE AS1006E-2005 FITTING, CROSS, STANDARD AND REDUCER, FLARELESS
- SAE AS6103B-2020 FITTING, CROSS, STANDARD AND REDUCER, 37° SPHERICAL, FLARED
- SAE AS6105B-2020 FITTING, TEE, STANDARD AND REDUCER, 37° SPHERICAL, FLARED
工业和信息化部, Diameter
- HG/T 2138-2022 Glass lined concentric reducers, eccentric reducers and reducing flanges
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Diameter
- GB/T 2351-1993 Fluid power systems and components. Connectors and associated components. Outside diameters of tubes and inside diameters of hoses
- GB/T 2351-2005 Fluid power systems and components-Connectors and associated components-Nominal outside diameters of tubes and nominal inside diameters of hoses
- GB/T 26826-2011(英文版) Measurement for diameter of carbon nanotubes
- GB/T 26826-2011 Measurement for diameter of carbon nanotubes
NO-SN, Diameter
国家市场监督管理总局、中国国家标准化管理委员会, Diameter
- GB/T 2351-2021 Fluid power systems and components—Outside diameters of tubes and inside diameters of hoses
SAE - SAE International, Diameter
- SAE AS4406A-2011 FITTING ASSEMBLY, UNION, REDUCER AND NONREDUCER, INTERNAL FLARE
- SAE AS4130B-2013 ELBOW@ 45 DEGREE BULKHEAD@ STANDARD AND REDUCER@ REDUCED BODY@ FLARELESS
- SAE AS4696-1994 Fitting@ Sleeve@ Flareless@ Nonreducer and Reducer@ Short Acorn to Weld Tube End
- SAE AS4696C-2018 FITTING@ SLEEVE@ FLARELESS@ NONREDUCER AND REDUCER@ SHORT ACORN TO WELD TUBE END
- SAE AS4696B-2017 FITTING@ SLEEVE@ FLARELESS@ NONREDUCER AND REDUCER@ SHORT ACORN TO WELD TUBE END
- SAE AS4407A-2011 FITTING ASSEMBLY, ELBOW 90°, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
- SAE AS4405A-2011 FITTING ASSEMBLY, ADAPTER, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
- SAE AS896C-2008 Fitting, Nipple, Reducer, Flareless Tube to Pipe, External Thread
- SAE AS4408-1995 Fitting Assembly@ Elbow 90 Degrees@ Reducer and Nonreducer@ Internal Flare
- SAE AS4410-1995 Fitting Assembly@ Tee@ Reducer and Nonreducer@ Internal Flare on Run@ to Flared Tube
- SAE AS4409-1995 Fitting Assembly@ Elbow 45 Degrees@ Reducer and Nonreducer@ Internal Flare to Flared Tube
- SAE AS6230-2014 FITTING@ 37° INTERNAL FLARE TO TUBE WELD@ STRAIGHT AND REDUCER
- SAE AS4407-1995 Fitting Assembly@ Elbow 90 Degrees@ Reducer and Nonreducer@ Internal Flare to Flared Tube (FSC 4730)
- SAE AS1035E-2003 FITTING@ TEE@ STANDARD AND REDUCER@ FLARED
- SAE AS1036H-2010 FITTING@ CROSS@ STANDARD AND REDUCER@ FLARED
- SAE AS1035F-2010 FITTING@ TEE@ STANDARD AND REDUCER@ FLARED
- SAE AS1036F-2002 Fitting@ Cross@ Standard and Reducer@ Flared (FSC 4730)
- SAE AS1035C-1993 Tee@ Standard and Reducer@ Flared Tube
- SAE AS1035D-2001 TEE, REDUCER, FLARED TUBE
- SAE AS1036E-2001 CROSS, REDUCER, FLARED TUBE
- SAE AS21916D-2008 REDUCER@ EXTERNAL THREAD@ FLARELESS TUBE
- SAE AS21916-1998 Reducer@ External Thread@ Flareless Tube (FSC 4730)
- SAE AS21916A-2001 Reducer@ External Thread@ Flareless Tube (FSC 4730; BEST COPY AVAILABLE)
- SAE AS21916B-2003 REDUCER@ EXTERNAL THREAD@ FLARELESS TUBE
- SAE AS21916E-2016 REDUCER@ EXTERNAL THREAD@ FLARELESS TUBE
- SAE AS1040D-2001 ELBOW, 45° REDUCER, FLARED TUBE
- SAE AS21916F-2016 REDUCER@ EXTERNAL THREAD@ FLARELESS TUBE
- SAE MA2008-1990 Radii-Tube Bend@ Metric
- SAE AS1005E-1993 Tee@ Standard and Reducer@ Flareless Tube
- SAE AS1005-1966 TEE@ REDUCER@ FLARELESS TUBE
- SAE AS1005G-2010 FITTING@ TEE@ STANDARD AND REDUCER@ FLARELESS
- SAE AS1005F-2001 TEE, REDUCER, FLARELESS TUBE
- SAE AS1005H-2017 FITTING@ TEE@ STANDARD AND REDUCER@ FLARELESS
- SAE AS1034F-2010 FITTING@ ELBOW@ 90 DEGREES@ STANDARD AND REDUCER@ FLARED
- SAE AS6103A-2018 FITTING@ CROSS@ STANDARD AND REDUCER@ 37° SPHERICAL@ FLARED
- SAE AS6105A-2018 FITTING@ TEE@ STANDARD AND REDUCER@ 37° SPHERICAL@ FLARED
Professional Standard - Petrochemical Industry, Diameter
- SH/T 3035-2007 Guide for pipeline sizing in petrochemical industry
- SH/T 3035-2018 Guidelines for pipe diameter selection of petrochemical process units
- SHJ 35-1991 Guidelines for pipe diameter selection of process equipment in petrochemical enterprises
- SH 3035-1991 Guideline for pipe diameter selection in process units for petrochemical enterprises
- SH 3035-1991(条文说明) Explanation of the provisions of the guidelines for the selection of pipe diameters for process equipment in petrochemical enterprises
Danish Standards Foundation, Diameter
- DS/ISO 4397:1989 Fluid power systems and components. Connectors and associated components. Outside diameters of tubes and inside diameters of hoses
German Institute for Standardization, Diameter
- DIN EN 4045:2003 Aerospace series - Capillary tubes, seamless, in heat resisting alloys - Diameter 0,6 mm D 2 mm; Dimensions; German and English version EN 4045:2001
- DIN 1988-3:1988 Drinking water supply systems; pipe sizing (DVGW code of practice)
- DIN EN 4267:2003 Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm D 160 mm; Dimensions; German and English version EN 4267:2001
- DIN 49049:1960 Allocation of the lines to the pipe diameters of steel armoured conduits
- DIN 86089:2022-12 Fittings for butt welding into copper-nickel-alloy pipelines - Concentric reducers / Note: Date of issue 2022-11-04*Intended as replacement for DIN 86089 (2008-02).
- DIN 86089:2008-02 Fittings for butt welding into copper-nickel-alloy pipelines - Concentric reducers / Note: To be replaced by DIN 86089 (2022-12).
CZ-CSN, Diameter
International Organization for Standardization (ISO), Diameter
- ISO 4397:1993 Fluid power systems and components; connectors and associated components; nominal outside diameters of tubes and nominal inside diameters of hoses
- ISO 3607:1977 Polyethylene (PE) pipes; Tolerances on outside diameters and wall thicknesses
- ISO 3609:1977 Polypropylene (PP) pipes; Tolerances on outside diameters and wall thicknesses
- ISO 3608:1976 Chlorinated polyvinyl chloride (CPVC) pipes; Tolerances on outside diameters and wall thicknesses
- ISO 3606:1976 Unplasticized polyvinyl chloride (PVC) pipes; Tolerances on outside diameters and wall thicknesses
- ISO 4397:1978 Fluid power systems and components — Connectors and associated components — Outside diameters of tubes and inside diameters of hoses
- ISO 2964:1985 Aerospace; Tubing; Outside diameters and thicknesses; Metric dimensions
- ISO 1307:1975 Withdrawal of ISO 1307-1975
- ISO 1307:1983 Rubber and plastics hoses — Bore diameters and tolerances on length
Defense Logistics Agency, Diameter
- DLA A-A-59444 VALID NOTICE 1-2004 REDUCER COUPLING, TUBE, MALE TO FEMALE SOLDER-JOINT, REFRIGERATION
- DLA A-A-59444-1999 REDUCER COUPLING, TUBE, MALE TO FEMALE SOLDER-JOINT, REFRIGERATION
- DLA A-A-59447 VALID NOTICE 1-2004 REDUCER COUPLING, TUBE FEMALE TO FEMALE SOLDER-JOINT, REFRIGERATION
- DLA A-A-59447-1999 REDUCER COUPLING, TUBE FEMALE TO FEMALE SOLDER-JOINT, REFRIGERATION
Korean Agency for Technology and Standards (KATS), Diameter
- KS B ISO 4397:2002 Fluid power systems and components-connectors and associated components-Nominal outside diameters of tubes and nominal inside diameters of hoses
- KS B ISO 4397:2013 Fluid power systems and components-connectors and associated components-Nominal outside diameters of tubes and nominal inside diameters of hoses
- KS W 1544-1999 Aerospace-Tubing-Outside diameters and thicknesses-Metric dimensions
British Standards Institution (BSI), Diameter
- 2M 46-1986 Specification for outside diameters and thicknesses of tubing
- BS 2M 46:1986 Specification for outside diameters and thicknesses of tubing
U.S. Military Regulations and Norms, Diameter
American Society for Testing and Materials (ASTM), Diameter
- ASTM F1098-87(2004) Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24
- ASTM F885-84(2001) Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS frac14; to 2
- ASTM F885-84(2006) Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS frac14; to 2
- ASTM F885-84(2011) Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS ¼ to 2
Professional Standard - Machinery, Diameter
European Committee for Standardization (CEN), Diameter
Professional Standard - Railway, Diameter
AIA/NAS - Aerospace Industries Association of America Inc., Diameter
SE-SIS, Diameter
RO-ASRO, Diameter
- SR ISO 4397:1993 Fluid power systems and components. Connectors and associated components. Outside diameters of tubes and inside diameters of hoses
- STAS 9677-1974 RUBBER HOSIiS Checking of inside diameter und of wall thickness
Association Francaise de Normalisation, Diameter
- NF M82-237:1955 Mining equipment. Compressed air pipes. Conical reduction couplings.
- NF S61-112:2011 Fire-fighting hoses - Flexible delivery hoses of diameters 25 - 45 - 70 - 110 - 152.
- NF L10-070*NF ISO 2964:1987 Aerospace. Tubing. Outside diameters and thicknesses. Metric dimensions.
- NF C68-100:1995 Conduits for electrical purposes. Outside diameters of conduits for electrical installations and threads for conduits and fittings.
- NF E63-551:1968 CASTING AND EXTRUSION EQUIPMENT. EXTERNAL DIAMETERS OF INJECTION POTS AND NOZZLES.
AENOR, Diameter
- UNE 27431:2014 Civil shipbuilding and ship repairing. Selective list. Pipes and accessories: Steel pipe reducers
- UNE 27486:2014 Civil shipbuilding and ship repairing. Selective list. Pipes and accessories: Steel pipe reducers (ASTM-ANSI)
PL-PKN, Diameter
- PN L01464-1992 Aerospace. Tubing. Outside diameters and thicknesses. Metric dimensions
- PN H74204-1964 Pipings S?eel lin? pipes Ou?side diameters
Professional Standard - Military and Civilian Products, Diameter
- WJ 2649-2004 General specification for grating type barrel caliper gauge
JP-JARI, Diameter
Professional Standard - Chemical Industry, Diameter
WRC - Welding Research Council, Diameter
- BULLETIN 285-1983 STRESS INDICES AND FLEXIBILITY FACTORS FOR CONCENTRIC REDUCERS ; FINITE ELEMENT ANALYSIS OF ECCENTRIC REDUCERS AND COMPARISONS WITH CONCENTRIC REDUCERS
Aerospace Industries Association, Diameter
RU-GOST R, Diameter
GOSTR, Diameter
ES-UNE, Diameter
- UNE-EN 6126:2018 Aerospace series - Fitting end, 24° internal cone, external thread, flareless type, size -32 tube diameter D=2 inches (D=50,8 mm) extra fine thread pitch inch series - Inch series - Design standard (Endorsed by Asociación Española de Normalización ...
Professional Standard - Aviation, Diameter
Professional Standard - Aerospace, Diameter
VN-TCVN, Diameter
GM North America, Diameter
ZA-SANS, Diameter
- SANS 1529-4:2004 Water meters for cold potable water Part 4: Mechanical meters of nominal bore exceeding 100 mm but not exceeding 800 mm
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Diameter
- PREN 3658-1990 Aerospace Series Tube Bend Radii Design Standard (Edition 1)
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Diameter
- ASHRAE 4653-2003 Pressure Loss Data for PVC Pipe Elbows@ Reducers@ and Expansions (RP-1193)