ZH
RU
ES
High Temperature Viscosity Properties
High Temperature Viscosity Properties, Total:497 items.
In the international standard classification, High Temperature Viscosity Properties involves: Vocabularies, Glass, Adhesives, Construction materials, Fuels, Non-metalliferous minerals, Lubricants, industrial oils and related products, Ceramics, Road engineering, Footwear, Surface treatment and coating, Plastics, Equipment for petroleum and natural gas industries, Products of the chemical industry, Textile fibres, Paints and varnishes, Transport, Rubber, Installations in buildings, Pulps, Materials for aerospace construction, Thermodynamics and temperature measurements, Linear and angular measurements, Iron and steel products, Medical equipment, Cereals, pulses and derived products, Non-ferrous metals, Inks. Printing inks, Hydraulic fluids, Electricity. Magnetism. Electrical and magnetic measurements, Test conditions and procedures in general, Fibre optic communications, Road vehicle systems, Testing of metals, Conducting materials, Insulating fluids, Waxes, bituminous materials and other petroleum products, Solar energy engineering, Geology. Meteorology. Hydrology, Reinforced plastics, Rubber and plastics products, Vibrations, shock and vibration measurements, Mechanical testing, Electrical engineering in general, Burners. Boilers, Galvanic cells and batteries, Electromechanical components for electronic and telecommunications equipment, Wood-based panels, Optoelectronics. Laser equipment.
(U.S.) Ford Automotive Standards, High Temperature Viscosity Properties
- FORD WSS-M7C97-A2-2011 CAVITY WAX, HEAT KICK 60 °C, IMPROVED CREEP CHARACTERISTIC, LOW VISCOSITY CORROSION PROTECTION, AUTOMOTIVE CAVITIES ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESS-M11P24-A1-2013 ADHESIVE, MALE THREADED FASTENER - FOR SERVICE TEMPERATURES BELOW 135 °C ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSA-M2P170-A1-2005 PAINT PERFORMANCE, CORROSION/HEAT RESISTANT COATING, 150 °C, max ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P178-A-2005 PAINT PERFORMANCE, CORROSION/HEAT RESISTANT COATING, 250 DEGREES C, MAX ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M2G329-A-2007 ADHESIVE, EPOXY, SOLVENT FREE, 180 DEGREES C CURING 80 DEGREES C APPLICABLE, METAL/METAL, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESS-M11P24-A2-2013 ADHESIVE, MALE THREADED FASTENER - FOR SERVICE TEMPERATURES BELOW 65 °C ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESS-M11P24-A1)
- FORD FLTM BV 153-03-2001 RESISTANCE OF SEALERS AND HEAVY MASTIC ADHESIVES TO HEAT Replaces FLTM EU-BV 053-03 [Replaced: FORD FLTM EU-BV 053-03]
- FORD FLTM BJ 127-01-2001 SCANNING BROOKFIELD VISCOMETER TEST FOR LOW TEMPERATURE ENGINE OIL PUMPABILITY Replaces FLTM BJ 027-01
Association Francaise de Normalisation, High Temperature Viscosity Properties
- NF B30-010:1967 Glass. Vocabulary of characteristic temperatures related to glass viscosities.
- NF T13-001:1967 Rhombic mica. Dimensions. Appearance characteristics high temperature strength.
- T73-418:1983 Surface active agents. Preparation of emulsion from mean to high viscosity. Study of lts properties. Evaluation of emulsifying power.
- NF T76-331*NF EN 12964:2001 Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature
- NF T76-135*NF EN 14292:2005 Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature
- NF X41-035*NF EN 12024:1996 Self adhesive tapes. Measurement of resistance to elevated temperature and humidity.
- NF P85-519:1998 Building construction. Sealants. Determination of adhesion/cohesion properties at variable temperatures.
- NF T76-052:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91).
- NF T76-053*NF EN 14258:2005 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
- NF EN 12964:2001 Adhésifs pour cuir et matériaux pour articles chaussants - Adhésifs à haute ténacité - Contrôle de la résistance à la chaleur des joints à une température élevée
- NF T76-052*NF EN 14257:2019 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- NF G62-114:2002 Footwear - Test methods for uppers - High temperature behaviour.
- NF G06-037:1981 Essais des fibres - Cellulose - Détermination de l'indice de viscosité limite et du degré de polymérisation moyen viscosimétrique
- NF EN 14257:2019 Adhésifs - Adhésifs pour bois - Détermination de la résistance en traction à température élevée des joints à recouvrement (essai WATT '91)
- NF A92-031:1994 Vitreous and procelain enamels. Characteristics of the pyrolitic self-cleaning enamels.
- UTE C93-524:1980 Fils isolés pour températures élevées jusqu'à 150 degrés Celsius - Recueil de spécifications particulières
- NF T76-112:1995 Adhesives. Determination of peel resistance of high-strength adhesive bonds. Floating roller method.
- NF T51-114:1979 Plastics. Methods for determining mechanical characteristics at temperature specified in a enclosure with regulation of the temperature.
- NF ISO 2921:2020 Caoutchouc vulcanisé - Détermination des caractéristiques à basse température - Méthode température-retrait (essai TR)
- NF T46-032*NF ISO 2921:2020 Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
- NF B41-206:1995 Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Part 1 : determination of flexural strength.
- NF EN 14258:2005 Adhésifs - Comportement mécanique des assemblages collés soumis à une exposition à court et long termes à des conditions de température spécifiées
- NF EN IEC 61788-7:2020 Supraconductivité - Partie 7 : mesurages des caractéristiques électroniques - Résistance de surface des supraconducteurs haute température critique aux hyperfréquences
- NF T76-100-9*NF ISO 16525-9:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 9 : determination of high-speed signal-transmission characteristics
- NF EN ISO 14574:2016 Céramiques techniques - Propriétés mécaniques des céramiques composites à haute température - Détermination des caractéristiques en traction
- NF A35-558*NF EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- NF B43-215*NF ISO 17095:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for interfacial bond strength of ceramic materials at elevated temperatures
- NF T70-526:2003 Energetic materials for defense - Safety, vulnerability - Cook-off critical temperature.
- NF T70-526:2009 Energetic materials for defense - Safety, vulnerability - Cook-off critical temperature.
- NF B43-214:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties.
- NF EN 12703:2016 Adhésifs pour papier et carton, emballage et produits sanitaires jetables - Détermination de la flexibilité à basse température ou de la température de fissuration à froid
- NF C44-059-32-1*NF EN 62059-32-1:2012 Electricity metering equipment - Dependability - Part 32-1 : durability - Testing of the stability of metrological characteristics by applying elevated temperature
- NF EN 10273:2016 Barres laminées à chaud en acier soudable pour appareils à pression, avec des caractéristiques spécifiées aux températures élevées
- NF C57-104*NF EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics.
- NF T70-367:2009 Energetic materials for defence - Characterisation of the bond between energetic materials and interior fitting materials - Peeling
- NF T70-367:2013 Energetic materials for defence - Characterisation of the bond between energetic materials and interior fitting materials - Peeling
- NF EN ISO 11343:2019 Adhésifs - Détermination de la résistance dynamique au clivage de joints collés à haute résistance soumis aux conditions d'impact - Méthode d'impact au coin
- NF T70-302:1995 Energetic materials for defense. Physical-chemical analysis and properties. Tnt solidifcation temperature. Automatized method.
- NF T76-315:2012 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature.
- NF T76-315*NF EN 12703:2016 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
- NF EN ISO 14544:2016 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à haute température - Détermination des caractéristiques en compression
- NF EN ISO 9047:2010 Construction immobilière - Produits pour joints - Détermination des propriétés d'adhésivité/cohésion des mastics à température variable
- NF B43-213:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties.
- NF B43-302:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties.
- NF C57-104*NF EN IEC 60891:2021 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
- NF EN IEC 60891:2021 Dispositifs photovoltaïques - Procédures pour les corrections en fonction de la température et de l'éclairement à appliquer aux caractéristiques I-V mesurées
- NF T76-113:1983 Water adhesives. Aminoplastic. Determination of conventional gel time at different temperatures.
- NF B43-302*NF EN ISO 14544:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high - Determination of compression properties
- NF T70-504:2007 Energetic materials for defense - Safety - Vulnerability - Progressive heating (temperature of ignition).
- NF T70-504:1996 Energetic materials for defense. Safety. Vulnerability. Progressive heating (temperature of ignition).
- NF T46-082*NF ISO 11346:2014 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use
- NF T70-359:1996 Energetic materials for defense. Physico-chemical analysis and properties. Measurement of the duration of the outflow on the tnt or tnt compositions with the efflux viscosimeter
CH-SNV, High Temperature Viscosity Properties
German Institute for Standardization, High Temperature Viscosity Properties
- DIN EN 12024:1996 Self adhesive tapes - Measurement of resistance to elevated temperature and humidity; German version EN 12024:1996
- DIN EN 12964:2001-07 Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature; German version EN 12964:2001
- DIN EN 14292:2005-09 Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature; German version EN 14292:2005
- DIN EN 12024:1996-07 Self adhesive tapes - Measurement of resistance to elevated temperature and humidity; German version EN 12024:1996
- DIN EN 14257:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT'91) English version of DIN EN 14257:2006-09
- DIN EN 17224:2019-09 Determination of compressive shear strength of wood adhesives at elevated temperatures; German version EN 17224:2019
- DIN EN 14258:2005-02 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature; German version EN 14258:2004
- DIN EN 14258:2005 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature; German version EN 14258:2004
- DIN EN 17224:2019 Determination of compressive shear strength of wood adhesives at elevated temperatures
- DIN EN 14257:2019-12 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT'91); German version EN 14257:2019
- DIN EN 14257:2019 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT'91)
- DIN EN 12788:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength; English version of DIN EN 12788
- DIN EN 1892:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties; German version EN 1892:2005
- DIN EN 12290:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties; German version EN 12290:2005
- DIN EN 12289:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties; German version EN 12289:2005
- DIN EN 1893:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties; German version EN 1893:2005
- DIN EN 12789:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength; German version EN 12789:2002
- DIN EN 843-1:2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength; German version EN 843-1:2006
- DIN EN ISO 11248:1999 Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993); German version EN ISO 11248:1999
- DIN EN 15158:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude; English version of DIN EN 15158:2006-10
- DIN EN 820-1:2003 Advanced technical ceramics - Methods of testing monolithic ceramics; Thermo-mechanical properties - Part 1: Determination of flexural strength at elevated temperatures; German version EN 820-1:2002
- DIN ISO 815:2000 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993)
- DIN EN 1894:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens; German version EN 1894:2005
- DIN EN 14186:2008 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique; English version of DIN EN 14186:2008-02
- DIN EN 15156:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude; English version of DIN EN 15156:2006-10
- DIN EN ISO 11343:2019 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method (ISO 11343:2019)
- DIN EN 15157:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude; English Version of DIN EN 15157:2006-10
- DIN EN ISO 11343:2019-10 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method (ISO 11343:2019); German version EN ISO 11343:2019
CL-INN, High Temperature Viscosity Properties
American Society for Testing and Materials (ASTM), High Temperature Viscosity Properties
- ASTM E102/E102M-93(2021) Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
- ASTM E102/E102M-93(2016) Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
- ASTM D4741-06 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-00 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-96 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-12 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-13 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4402-02 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
- ASTM D4402/D4402M-12 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
- ASTM D4741-21 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-18 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-20a Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-20 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-17 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D5481-96(2001) Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
- ASTM D5481-96 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
- ASTM D5481-10 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
- ASTM D5481-13 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
- ASTM D4402/D4402M-15(2022) Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
- ASTM D4402/D4402M-23 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
- ASTM D4402/D4402M-15 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
- ASTM D4402/D4402M-13 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
- ASTM D4402-06 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
- ASTM D5481-21 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
- ASTM D5481-20 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
- ASTM D5481-13(2020) Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
- ASTM D5481-20a Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
- ASTM D5481-04 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
- ASTM D6267-05 Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
- ASTM E102/E102M-93(2009) Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
- ASTM D6267/D6267M-13(2022) Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
- ASTM D4683-09 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 &x00B0;C
- ASTM D4683-13 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150?deg;C
- ASTM D1646-81 Standard Test Method for Rubber - Viscosity And Vulcanization Characteristics ( Mooney Viscometer)
- ASTM D5133-13 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-01 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D1200-94(1999) Standard Test Method for Viscosity by Ford Viscosity Cup
- ASTM D6267/D6267M-13 Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
- ASTM D1646-92 Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer)
- ASTM D6267-08 Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
- ASTM D6267/D6267M-13(2017) Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
- ASTM D1795-13(2021) Standard Test Method for Intrinsic Viscosity of Cellulose
- ASTM D7374-08 Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
- ASTM D5133-99 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-19 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-20 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-05 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D2295-96(2002) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
- ASTM D2295-96(2008) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
- ASTM D4683-20 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150℃
- ASTM D4683-17 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150℃
- ASTM D1646-00 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
- ASTM D1646-03 Standard Test Methods for Rubber8212;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
- ASTM D1646-03a Standard Test Methods for Rubber8212;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
- ASTM E102-93(2003)e1 Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
- ASTM D6082-00 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
- ASTM D6082-97 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
- ASTM D6082-01 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
- ASTM D6082-06 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
- ASTM D6082-22 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
- ASTM D6082-11 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
- ASTM D6082-12 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
- ASTM D6082-23 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
- ASTM D4683-10 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 &x00B0;C
- ASTM D4683-96 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator
- ASTM D1646-04 Standard Test Methods for Rubber8212;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
- ASTM D1646-07 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
- ASTM D1646-19a Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
- ASTM D1646-15 Standard Test Methods for Rubber&x2014;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
- ASTM D1646-06 Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
- ASTM D1646-07(2012) Standard Test Methods for Rubbermdash;Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
- ASTM D6816-02 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
- ASTM D1646-19 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
- ASTM D1646-17 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
- ASTM D4683-04 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator
- ASTM D7374-21 Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
- ASTM D7374-08(2015) Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
- ASTM D7110-05a Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM D4040-10(2019) Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
- ASTM E1800-00 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160176F Elevated Humidity Service), Type I Panels
- ASTM E1800-03 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160176;F Elevated Humidity Service), Type I Panels
- ASTM D6080-97 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
- ASTM D6080-18a Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
- ASTM D6080-18 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
- ASTM D2295-96(2016) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
- ASTM D6080-10 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
- ASTM D7496-09 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
- ASTM D7247-17 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
- ASTM D6080-12 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
- ASTM G142-98(2004) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
- ASTM G142-98 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
- ASTM G142-98(2011) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
- ASTM D7110-15 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM D8162-20 Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
- ASTM D8162-20a Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
- ASTM F2258-03 Standard Test Method for Strength Properties of Tissue Adhesives in Tension
- ASTM C1795-15 Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels
- ASTM F2258-05 Standard Test Method for Strength Properties of Tissue Adhesives in Tension
- ASTM F2258-05(2010) Standard Test Method for Strength Properties of Tissue Adhesives in Tension
- ASTM F2258-05(2015) Standard Test Method for Strength Properties of Tissue Adhesives in Tension
- ASTM D4603-03 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
- ASTM D4603-96 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
- ASTM E955-88(2004) Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples
- ASTM E189-63(1975)e1 Recommended Practice for Determining Temperature-Electrical Resistance Characteristics (EMF) of Metallic Materials
- ASTM D2295-96 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
- ASTM D7247-16 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
- ASTM D6468-08 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
- ASTM D4603-03(2011)e1 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
- ASTM D7857-16 Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures
- ASTM D905-98 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM C1135-00 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
- ASTM C1135-00(2005) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
- ASTM C1135-15 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
- ASTM C1135-00(2011) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
- ASTM D5516-02 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
- ASTM D5516-00 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
- ASTM D5516-01 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
- ASTM D5516-01a Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
- ASTM E955-88(2009)e1 Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples
Institute of Interconnecting and Packaging Electronic Circuits (IPC), High Temperature Viscosity Properties
European Committee for Standardization (CEN), High Temperature Viscosity Properties
- EN 12024:1996 Self adhesive tapes - Measurement of resistance to elevated temperature and humidity
- DD ENV 12788-1998 Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temperature under Inert Atmosphere - Determination of Flexural Strength
- EN 14257:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- EN 14258:2004 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
- EN 12788:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength
- EN 12964:2001 Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature
- DD ENV 12 289-1996 Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Ambient Temperature - Determination of In-Plane Shear Properties
- EN 843-1:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
- EN 843-1:1995 Advanced Technical Ceramics - Monolithic Ceramics - Mechanical Properties at Room Temperature Part 1: Determination of Flexural Strength
- EN 15156:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
- EN 15158:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude
- prEN 843-1-1992 Advanced technical ceramics; mechanical properties of monolithic ceramics at room temperature; part 1: determination of flexural strength
- EN 658-1:1998 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties
- EN ISO 11248:1999 Plastics - Thermosetting Moulding Materials - Evaluation of Short-Term Performance at Elevated Temperatures
- EN 13235:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour
- EN 1464:1994 Adhesives - Determination of Peel Resistance of High-Strength Adhesive Bonds - Floating Roller Method (ISO 4578:1990 Modified)
- EN 1892:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties
- EN 14186:2007 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique
- EN 12289:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties
- EN 12703:1999 Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Determination of Low Temperature Flexibility or Cold Crack Temp
- EN 14260:2003 Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Road tars - Characteristics and test methods
- EN 14266:2003 Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Coating tar - Characteristics and test methods
- DD ENV 22 605-2-1991 Steel Products for Pressure Purposes - Derivation and Verification of Elevated Temperature Properties - Part 2: Proof Stress of Austenitic Steel Products
- EN 1893:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties
- EN 14263:2003 Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Carbon binder pitch - Characteristics and test methods
- EN 10273:2007 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
- EN 10273:2000 Hot Rolled Weldable Steel Bars for Pressure Purposes with Specified Elevated Temperature Properties
- EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
- EN 15157:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
- EN 12290:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties
- EN 12703:2016 Adhesives for paper and board@ packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
- EN 820-1:2002 Advanced technical ceramics - Method of testing monolithic ceramics; Thermomechanical properties - Part 1: Determination of flexural strength at elevated temperatures
- EN 658-2:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties
Professional Standard - Electricity, High Temperature Viscosity Properties
- DL/T 660-2007 Test procedure for the viscosity of coal ash in high-temperature
- DL/T 660-1998 Test procedure for coal ash high-temperature viscosity characteristic
AT-ON, High Temperature Viscosity Properties
AENOR, High Temperature Viscosity Properties
- UNE-EN 12964:2001 Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature.
- UNE-EN 12024:1996 SELF ADHESIVE TAPES. MEASUREMENT OF RESISTANCE TO ELEVATED TEMPERATURE AND HUMIDITY.
- UNE-EN 14292:2005 Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature
- UNE-EN 14258:2005 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
- UNE-EN 14257:2007 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- UNE-EN 10269:2014 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- UNE 28039:1964 CHARACTERISTICS OF ELECTRIC WIRES WITH COPPER CONDUCTORS FOR AIRCRAFT INSTALLATIONS. RIGHT FOR HIGH TEMPERATURES.
- UNE-EN ISO 11343:2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003)
- UNE-EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
CZ-CSN, High Temperature Viscosity Properties
Danish Standards Foundation, High Temperature Viscosity Properties
- DS/EN 12964:2001 Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature
- DS/EN 12024:1997 Self adhesive tapes - Measurement of resistance to elevated temperature and humidity
- DS/EN 14292:2005 Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature
- DS/EN 14258:2004 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
- DS/EN 14257:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- DS/IEC/TS 62306:2007 Ultrasonics - Field characterisation - Test objects for determining temperature elevation in diagnostic ultrasound fields
- DS/ISO 2921:1979 Vulcanized rubber. Determination of low temperature characteristics. Temperature-retraction procedure (TR test)
- DS/EN ISO 11343:2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method
- DS/EN 843-1:1995 Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 1: Determination of flexural strength
- DS/EN 12703:2012 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
- DS/ENV 658-1:1993 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Part 1: Determination of tensile strength
- DS/ENV 658-2:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 2: Determination of compressive strength
- DS/ENV 658-3:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 3: Determination of flexural strength
- DS/ISO 17714:2007 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
- DS/EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
Lithuanian Standards Office , High Temperature Viscosity Properties
- LST EN 12964-2002 Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature
- LST EN 12024-2000 Self-adhesive tapes - Measurement of resistance to elevated temperature and humidity
- LST EN 14292-2005 Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature
- LST EN 14258-2005 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
- LST EN 14257-2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- LST EN 10269-2014 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- LST EN 10269-2001 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- LST EN 10269-2001/A1-2006 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- LST EN 10269-2001/A1-2006/AC-2009 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- LST EN 12703-2012 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
- LST EN ISO 11343:2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003)
- LST EN 60891-2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics (IEC 60891:2009)
Military Standard of the People's Republic of China-General Armament Department, High Temperature Viscosity Properties
- GJB 10247.2-2021 Test methods for high temperature mechanical properties of high temperature resistant adhesives/sealants Part 2: Peel strength
- GJB 10247.3-2021 Test methods for high temperature mechanical properties of high temperature resistant adhesives/sealants Part 3: Tear-off strength
- GJB 10247.1-2021 Test methods for high temperature mechanical properties of high temperature resistant adhesives/sealants Part 1: Tensile shear strength
GM North America, High Temperature Viscosity Properties
BE-NBN, High Temperature Viscosity Properties
- NBN-ISO 9047:1992 Building construction - Sealants - Determination of adhesion/cohesion properties at variable temperatures
- NBN A 11-201-1973
- NBN-ISO 9046:1992 Building construction - Sealants - Determination of adhesion/cohesion properties at constant temperature
- NBN T 31-031-1985 Rubber, vulcanized - Determinationof low temperature characteristics- Temperature-re-traction procedure(TR test)
- NBN EN 1464-1995 Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method (ISO 4578:1990 modified)
- NBN-EN 22605-3-1992
- NBN-ISO 815:1994 Rubber, vulcanized or thermoplastic. Determination of compression set at ambient, elevated or low temperatures
National Aeronautics and Space Administration (NASA), High Temperature Viscosity Properties
- NASA-TR-R-132-1962 Estimated Viscosities and Thermal Conductivities of Gases at High Temperatures
ES-UNE, High Temperature Viscosity Properties
- UNE-EN 17224:2020 Determination of compressive shear strength of wood adhesives at elevated temperatures
- UNE-EN 14257:2020 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- UNE-EN 12703:2017 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
- UNE-EN ISO 11343:2020 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method (ISO 11343:2019)
- UNE-EN IEC 60891:2022 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
British Standards Institution (BSI), High Temperature Viscosity Properties
- BS EN 17224:2019 Determination of compressive shear strength of wood adhesives at elevated temperatures
- BS EN 12024:1997 Self adhesive tapes - Measurement of resistance to elevated temperature and humidity
- BS EN 14257:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- BS EN 14257:2019 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- BS EN 14258:2004 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
- BS EN ISO 17703:2018 Footwear. Test methods for uppers. High temperature behaviour
- BS ISO 14615:1997 Adhesives. Durability of structural adhesive joints. Exposure to humidity and temperature under load
- BS EN 62059-32-1:2012 Electricity metering equipment. Dependability. Durability. Testing of the stability of metrological characteristics by applying elevated temperature
- BS EN 658-3:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength
- 22/30456620 DC BS ISO 34257. Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- BS EN 820-1:2003 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Determination of flexural strength at elevated temperatures
- BS EN 820-1:2002 Test methods for advanced industrial ceramics Monolithic ceramics Thermomechanical properties Determination of flexural strength at high temperatures
- BS EN 658-1:1998 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of tensile strength
- BS ISO 16525-9:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of high-speed signal-transmission characteristics
- BS EN 12289:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties
- BS EN 12789:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
- BS ISO 14615:1998 Adhesives - Durability of structural adhesive joints - Exposure to humidity and temperature under load
- BS ISO 2921:2019 Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)
- BS EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- BS EN 15158:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude
- BS EN 13235:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour
- BS EN 843-1:2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Determination of flexural strength
- BS EN 843-1:2006 Advanced technical ceramics - Mechanical properties of
monolithic ceramics at room temperature - Part 1: Determination of flexural strength
- BS ISO 5351:2007 Pulps - Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
- BS ISO 5351:2010 Pulps - Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
- BS EN 12703:2012 Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature
- BS EN 12703:2016 Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature
- BS EN 1893:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties
- BS 2782-7 Method 732D:1999 Methods of testing plastics. Rheological properties. Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers. Method 732D: Determination of the viscosity of polycarbonate (PC)...
- BS EN ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - High-strength thermosetting laminates and long-fibre-reinforced plastics
- BS EN 12290:2005 Advanced technical ceramics — Mechanical properties of ceramic composites at high temperature under inert atmosphere — Determination of compression properties
- BS EN 12290:2007 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties
- BS ISO 815-1:2014 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
- BS ISO 815-1:2009 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
- BS ISO 815-1:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - At ambient and elevated temperatures
- BS EN 15157:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
- BS 8449:2005 Building and construction sealants with movement accommodation factors greater than 25% - Method of test for determination of adhesion/cohesion properties at variable temperatures
- BS EN 14493:2002 Structural adhesives - Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions - Wedge impact method
- BS EN IEC 61788-7:2020 Superconductivity - Electronic characteristic measurements. Surface resistance of high-temperature superconductors at microwave frequencies
- DD ENV 820-1-1994 Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of flexural strength at elevated temperatures
- BS 2782-7 Method 740C:1996 Methods of testing plastics. Rheological properties. Polymer dispersions. Determination of white point temperature and minimum film-forming temperature
- BS EN 1894:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens
- BS EN 12788:2005 Advanced technical ceramics — Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength
- BS EN ISO 11343:2019 Tracked Changes. Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions. Wedge impact method
- BS EN 1097-10:2002 Tests for mechanical and physical properties of aggregates - Determination of water suction height
- BS EN 1097-10:2014 Tests for mechanical and physical properties of aggregates. Determination of water suction height
- BS EN 13234:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Evaluation of the resistance to crack propagation by notch sensitivity testing
- BS EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
Korean Agency for Technology and Standards (KATS), High Temperature Viscosity Properties
- KS M ISO 19212:2010 dhesives--Determination of temperature dependence of shear strength
- KS M ISO 19212-2014(2019) Adhesives — Determination of temperature dependence of shear strength
- KS M ISO 19212:2014 Adhesives — Determination of temperature dependence of shear strength
- KS M ISO 17703:2004 Footwear－Test methods for uppers－High temperature behaviour
- KS M ISO 4578:2019 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
- KS M ISO 14615-2007(2022) Adhesives－Durability of structural adhesive joints－Exposure to humidity and temperature under load
- KS M ISO 14615:2007 Adhesives－Durability of structural adhesive joints－Exposure to humidity and temperature under load
- KS M ISO 14615-2007(2017) Adhesives－Durability of structural adhesive joints－Exposure to humidity and temperature under load
- KS D ISO 2605-3-2004(2009) Steel products for pressure purposes Derivation and verification of elevated temperature properties Part 3 An alternative procedure for deriving the elevated temperature yield or proof stress properti
- KS M ISO 2921:2009 Rubber, vulcanized-Determination of low-temperature characteristics-Temperature-retraction procedure(TR test)
- KS M ISO 2921:2014 Rubber, vulcanized — Determination of low-temperature retraction (TR test)
- KS M ISO 4578:2009 Adhesives－Determination of peel resistance of high-strength adhesive bonds－Floating-roller method
- KS M ISO 11248:2007 Plastics－Thermosetting moulding materials－Evaluation of shortterm performance at elevated temperatures
- KS M ISO 5351:2006 Pulps-Determination of limiting viscosity number in cupri-ethylenediamine(CED) solution
- KS M ISO 5351:2014 Pulps — Determination of limiting viscosity number in cupriethylenediamine(CED) solution
- KS C 2608-2013(2018) Testing method of electrical resistance-temperature characteristics of metallic resistance materials
- KS C IEC 60891-2012(2022) Photovoltaic devices－Procedures for temperature and irradiance corrections to measured I-V characteristics
- KS C IEC 60891-2012(2017) Photovoltaic devices－Procedures for temperature and irradiance corrections to measured I-V characteristics
- KS D ISO 9327-3:2003 Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 3:Nickel steels with specified low temperature properties
- KS I ISO 17714:2020 Meteorology — Air temperature measurements —Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
- KS M ISO 13757-2003(2018)
- KS M 3062-1994 Testing method for stiffness properties of plastics as a function of temperature by means of a torsion test
- KS C 6111-3-2007 Electronic characteristic measurements－Intrinsic surface impedance of high-TC superconductor films at microwave frequencies
- KS C IEC 60891:2012 Photovoltaic devices－Procedures for temperature and irradiance corrections to measured I-V characteristics
- KS M ISO 11346:2007 Rubber, vulcanized or thermoplastic－Estimation of life－time and maximum temperature of use
- KS M ISO 11346:2017 Rubber, vulcanized or thermoplastic－Estimation of life－time and maximum temperature of use
- KS D ISO 2605-3:2004 Steel products for pressure purposes Derivation and verification of elevated temperature properties Part 3 An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
- KS D ISO 2605-3:2013 Steel products for pressure purposes Derivation and verification of elevated temperature properties Part 3 An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., High Temperature Viscosity Properties
RU-GOST R, High Temperature Viscosity Properties
- GOST 33363-2015 Lubricating oils. Determination for high temperature foaming characteristics
- GOST R 50045-1992 Vitreous enamels. Determination of viscosity characteristics. Testing for spreading
- GOST R 55118-2012 Solid recovered fuels. Methods for the determination of ash melting behaviour by using characteristic temperatures
- GOST R 57711-2017 Ceramic composites. Determination of characteristics fatigue loading with constant amplitude at high temperature
- GOST R EN 1604-2008 Thermal insulating products for building applications. Method for determination of dimensional stability under specified temperature and humidity conditions
- GOST 25.603-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
- GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
- GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
- GOST R 50835-1995 High explosives. Sensitivity characteristics determination for friction when impact displacement
- GOST R 55125-2012 Solid biofuels. Method for the determination of ash melting behaviour. Part 1. Characteristic temperatures method
International Organization for Standardization (ISO), High Temperature Viscosity Properties
- ISO/DIS 9200:2023 Petroleum measurement systems — Metering of viscous and high temperature liquids
- ISO/DIS 34257:2023 Adhesives — Wood adhesives — Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- ISO 4578:1990 Adhesives; determination of peel resistance of high-strength adhesive bonds; floating roller method
- ISO 17703:2003 Footwear - Test methods for uppers - High temperature behaviour
- ISO 4578:1979 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating roller method
- ISO 1628-2:1988 Plastics; determination of viscosity number and limiting viscosity number; part 2: poly(vinyl chloride) resins
- ISO 9047:1989 Building construction; sealants; determination of adhesion/cohesion properties at variable temperatures
- ISO 2921:1982 Rubber, vulcanized; Determination of low temperature characteristics; Temperature- retraction procedure (TR test)
- ISO 2921:2019 Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)
- ISO 5351:2004 Pulps - Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
- ISO 16525-9:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 9: Determination of high-speed signal-transmission characteristics
- ISO 5351:2010 Pulps - Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
- ISO 18437-6:2017 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 6: Time-temperature superposition
- ISO 2605-3:1985 Steel products for pressure purposes; Derivation and verification of elevated temperature properties; Part 3 : An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
- ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
- ISO 306:2013 Plastics.Thermoplastic materials.Determination of Vicat softening temperature (VST)
- ISO 11346:2004 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use
- ISO 11346:2014 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use
CEN - European Committee for Standardization, High Temperature Viscosity Properties
- PREN 17224-2018 Determination of compressive shear strength of wood adhesives at elevated temperatures
- PREN 14257-2018 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- EN ISO 17703:2018 Footwear - Test methods for uppers - High temperature behaviour
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, High Temperature Viscosity Properties
- GB/T 11543-1989 Surface active agents--The identification of emulsions of moderate to high viscosity and the method of evaluation of their capability of emulsifying
- GB/T 43149-2023 Design and metrological characteristics of height calipers
- GB/T 7758-1987 Rubber, vulcanized--Determination of low temperature characteristics--Temperature-retraction procedure(TR test)
- GB/T 1233-1992 Rubber,unvulcanized--Determination of prevulcanization characteristics--Shearing disk method
- GB/T 17215.9321-2016 Electricity metering equipment.Dependability.Part 321:Durability testing of the stability of metrological characteristics by applying elevated temperature
- GB/T 6495.4-1996 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices
Society of Automotive Engineers (SAE), High Temperature Viscosity Properties
- SAE AS210-2014 Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude)
- SAE AMS3372A-1988 Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure
- SAE AMS3372B-2012 Silicone Resin, Elastomeric, High Tear Strength, Elevated Temperature Cure
- SAE J2745-2007 Categorization and Properties of Advanced High Strength Automotive Sheet Steels
- SAE J2236-1999 Standard Method for Determining Continuous Upper Temperature Resistance of Elastomers
KR-KS, High Temperature Viscosity Properties
- KS M ISO 4578-2019 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
- KS M ISO 2921-2022 Rubber, vulcanized Determination of low temperature characteristics Temperature retraction procedure(TR test)
- KS C IEC 60891-2023 Photovoltaic devices — Procedures for temperature and irradiance corrections to measured I-V characteristics
- KS I ISO 17714-2020 Meteorology — Air temperature measurements —Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
ZA-SANS, High Temperature Viscosity Properties
- SANS 6041:1998 White point temperature (MFFT) of aqueous wood adhesive dispersions
International Telecommunication Union (ITU), High Temperature Viscosity Properties
PL-PKN, High Temperature Viscosity Properties
NL-NEN, High Temperature Viscosity Properties
- NVN-ENV 820-1-1994 Advanced technical ceramics. Monolithic ceramics. Thermomechanical properties. Part 1: Determination of flexural strength at elevated temperatures
Association of German Mechanical Engineers, High Temperature Viscosity Properties
SAE - SAE International, High Temperature Viscosity Properties
- SAE J2745-2015 Categorization and Properties of Advanced High Strength Automotive Sheet Steels
ESDU - Engineering Sciences Data Unit, High Temperature Viscosity Properties
- AERO 00.01.07 A-1972 Approximate transport properties of high-temperature air in dissociation equilibrium.
American Society of Mechanical Engineers (ASME), High Temperature Viscosity Properties
American Welding Society (AWS), High Temperature Viscosity Properties
- WRC 419:1997 Elevated Temperature Characterization of Flexible Graphite Sheet Materials for Bolted Flanged Joints
Hubei Provincial Standard of the People's Republic of China, High Temperature Viscosity Properties
- DB42/T 1410-2018 Procedures for identification of rice varieties with cascade temperature at flowering stage for high temperature tolerance
RO-ASRO, High Temperature Viscosity Properties
- STAS 12079-1982 RUBBKK O RING Determination of low temperature eharaeteristics by a temperature retraction procedure (TK test)
PH-BPS, High Temperature Viscosity Properties
- PNS ISO 9047:2021 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures
Standard Association of Australia （SAA）, High Temperature Viscosity Properties
- AS 2313.2.2:2005 Methods of test for single sided and double sided pressure-sensitive adhesion tape - Physical properties - Elongation
- AS 2313.1.7:2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Adhesion - Resistance to static shear load at elevated temperature
- AS 2313.1.9:2005 Methods of test for single and double sided pressure-sensitive adhesive tape - Adhesion - Resistance to shear peel at elevated temperature
- AS 2313.1.8:2005 Methods of test for single and double sided pressure-sensitive tape - Adhesion - Resistance to dynamic shear load at elevated temperature
- AS 2313.2.6:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Physical properties - Determining the thickness of release liner
- AS 2313.1.12:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Adhesion - Resistance to shear peel at ambient temperature
- AS 2313.1.10:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Adhesion - Resistance to static shear load at ambient temperature
- AS 2313.2.3:2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Physical properties - Length
- AS 2313.2.4:2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Physical properties - Thickness
- AS 2313.1.11:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Adhesion - Resistance to dynamic shear load at ambient temperature
SE-SIS, High Temperature Viscosity Properties
- SIS SS-ISO 2921:1990 Rubber, vulcanized — Determination of low temperature characteristics — Temperature-retraction procedure (TR test)
- SIS 27 21 21-1973 Pressure sensitive tape. Determination of adhesion before and after heat or damp treatment. Peel test 180
International Electrotechnical Commission (IEC), High Temperature Viscosity Properties
- IEC 62059-32-1:2011 Electricity Metering Equipment - Dependability - Part 32-1: Durability - Testing of the stability of metrological characteristics by applying elevated temperature
- IEC 60891:2021 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
- IEC TR 60943:2009 Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
- IEC 60891:1987 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicone photovoltaic devices
- IEC 60891:2009 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
Japanese Industrial Standards Committee (JISC), High Temperature Viscosity Properties
- JIS K 6868-2:1999 Adhesives -- Determination of shear behaviour of structural bonds -- Part 2: Thick-adherent tensile-test method
- JIS C 2526:1994 Testing method for electrical resistance-temperature characteristics of metallic resistance materials
- JIS R 1699-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Characteristic of piezoelectric properties under high load conditions -- Part 1: Resonant-antiresonant method under high temperature conditions
- JIS C 60891:2019 Photovoltaic devices -- Procedures for temperature and irradiance corrections to measured I-V characteristics
- JIS K 6865:1999 Adhesives -- Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions -- Wedge impact method
- JIS K 5600-2-2:1999 Testing methods for paints -- Part 2: Characteristics and stability of paints -- Section 2: Viscosity
GOSTR, High Temperature Viscosity Properties
- GOST R 8.989-2020 State System for Ensuring the Uniformity of Measurements. Standard reference data. Liquid and gaseous benzene. Thermodynamic properties, dynamic viscosity and thermal conductivity at temperatures from 280 K to 725 K and pressures up to 100 MPa
- GOST R 8.948-2018 State system for ensuring the uniformity of measurements. Standard reference data. Liquid and gaseous isobutane. Thermodynamic properties, dynamic viscosity and thermal conductivity at temperatures from 114 К up to 600 K and pressures up to 35 MPa
- GOST R 8.991-2020 State system for ensuring the uniformity of measurements. Standard reference data. Liquid and gaseous ethanol. Thermodynamic properties, dynamic viscosity and thermal conductivity at temperatures from 160 K to 650 K and pressures up to 100 MPa
- GOST R 8.952-2018 State system for ensuring the uniformity of measurements. Standard reference data. Liquid and gaseous n-butane. Thermodynamic properties, dynamic viscosity and thermal conductivity at temperatures from 135 К up to 600 K and pressures up to 70 MPa
- GOST R 8.981-2019 State system for ensuring the uniformity of measurements. Standard reference data. Liquid and gaseous ethane. Thermodynamic properties, dynamic viscosity and thermal conductivity at temperatures from 91 К up to 675 K and pressures up to 100 MPa
WRC - Welding Research Council, High Temperature Viscosity Properties
- BULLETIN 454- A LITERATURE REVIEW ON CHARACTERISTICS OF HIGH TEMPERATURE FERRITIC CR-MO STEELS AND WELDMENTS
American National Standards Institute （ANSI), High Temperature Viscosity Properties
- ANSI/TIA-455-67-A-2003 Procedures for Measuring High Temperature Aging Effects on Optical Characteristics of Optical Fibers
- ANSI/TIA/EIA 455-67-1996 Procedures for Measuring High Temperature Aging Effects on Optical Characteristics of Optical Fibers
- ANSI/TIA/EIA 455-70-1996 Procedures for Measuring High Temperature Aging Effects on Mechanical Characteristics of Optical Fibers
- ANSI/TIA/EIA 455-161-1996 Procedure for Measuring Temperature and Humidity Aging Effects on Mechanical Characteristics of Optical Fibers
- ANSI/TIA-455-160-A-2003 Procedure for Measuring Temperature and Humidity Aging Effects on Optical Characteristics of Optical Fibers (SP-2821-A)
VN-TCVN, High Temperature Viscosity Properties
- TCVN 7072-2008 Pulps.Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, High Temperature Viscosity Properties
- GB/T 1548-2016 Pulps—Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
Professional Standard - Petrochemical Industry, High Temperature Viscosity Properties
- SH/T 0618-1995 Dynamic Viscometry of Lubricating Oils under High Shear Conditions (Levan Felt Method)
Professional Standard - Aviation, High Temperature Viscosity Properties
- HB 5237-1983 Determination of low temperature properties of vulcanized rubber - Test method for retraction temperature (TR test)
未注明发布机构, High Temperature Viscosity Properties
- DIN EN ISO 9047:1998 Building construction — Sealants — Determination of adhesion/cohesion properties at variable temperatures
Professional Standard - Grain, High Temperature Viscosity Properties
- LS/T 6101-2002 Determination of pasting properties of cereals (rapid viscosity analyzer method)
European Committee for Electrotechnical Standardization（CENELEC）, High Temperature Viscosity Properties
- EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
API - American Petroleum Institute, High Temperature Viscosity Properties
- API BULL 5A1-1948 MINIMUM PERFORMANCE PROPERTIES PROPOSED API HIGH-STRENGTH CASING JOINTS (Second Edition)
- API BULL 5A1-1949 MINIMUM PERFORMANCE PROPERTIES PROPOSED API HIGH-STRENGTH CASING JOINTS (Third Edition)
IPC - Association Connecting Electronics Industries, High Temperature Viscosity Properties
- IPC TM-650 2.6.21B-2011 Service Temperature of Metal-Clad Flexible Laminate@ Cover Material and Adhesive Bonding Films
TIA - Telecommunications Industry Association, High Temperature Viscosity Properties
- TIA/EIA-455-160-1996 FOTP-160 Procedure for Assessing Temperature and Humidity Exposure Effects on Optical Characteristics of Optical Fibers
- TIA-455-67-1996 FOTP-67 Procedure for Assessing High Temperature Exposure Effects on Optical Characteristics of Optical Fibers
- TIA/EIA-455-67-1996 FOTP-67 Procedure for Assessing High Temperature Exposure Effects on Optical Characteristics of Optical Fibers
ES-AENOR, High Temperature Viscosity Properties
Defense Logistics Agency, High Temperature Viscosity Properties
IN-BIS, High Temperature Viscosity Properties