ZH
RU
ES

Composite three-point bending

Composite three-point bending, Total:110 items.

In the international standard classification, Composite three-point bending involves: Plastics, Reinforced plastics, Products of the textile industry, Construction materials, Materials for the reinforcement of composites, Rubber and plastics products, Inorganic chemicals, Refractories, Ceramics, Textile fibres, Road vehicle systems, Adhesives, Mechanical testing, Conducting materials, Waxes, bituminous materials and other petroleum products, Products of the chemical industry.

Association Francaise de Normalisation, Composite three-point bending

NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF T51-120-4:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 4 : essai en flexion quatre points sur éprouvettes non encastrées.
NF EN ISO 14125:1998 Composites plastiques renforcés de fibres - Détermination des propriétés de flexion
NF T51-120-5:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 5 : essai en flexion à moment constant.
NF T51-120-6:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 6 : essai de flexion par flambement.
NF T51-120-2:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 2 : essai en flexion sur éprouvettes encastrées.
NF T57-105/A1*NF EN ISO 14125/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1.
NF EN ISO 14125/A1:2011 Composites plastiques renforcés de fibres - Détermination des propriétés de flexion - Amendement 1
NF T51-120-1:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 1 : principes généraux.
NF T57-303:1989 PLASTICS. CARBON REINFORCED COMPOSITES. DETERMINATION OF INTERLAMINAR SHEAR STRENGTH. FLEXURE METHOD WITH SHORT SPAN LENGHT.
NF B43-205*NF EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5 : determination of interlaminar shear strength by short span bend test (three points).
NF EN ISO 14130:1998 Composites plastiques renforcés de fibres - Détermination de la résistance au cisaillement interlaminaire apparent par essai de flexion sur appuis rapprochés
NF EN ISO 17138:2022 Céramiques techniques - Propriétés mécaniques des composites céramiques à température ambiante - Détermination de la résistance en flexion
NF EN 658-5:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à température ambiante - Partie 5 : détermination de la résistance au cisaillement interlaminaire par essai de flexion sur appuis rapprochés (trois points)

American Society for Testing and Materials (ASTM), Composite three-point bending

ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D7264/D7264M-07 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-06 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM C1341-00(2005) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C1341-00 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C1341-06 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C1341-13(2018) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C1341-13(2023) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D6415/D6415M-06ae1 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-06 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

Professional Standard - Aerospace, Composite three-point bending

QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials

International Organization for Standardization (ISO), Composite three-point bending

ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 14125:1998/Amd 1:2011 Fibre-reinforced plastic composites - Determination of flexural properties; Amendment 1
ISO 14125:1998/cor 1:2001 Fibre-reinforced plastic composites - Determination of flexural properties; Technical Corrigendum 1

Professional Standard - Textile, Composite three-point bending

FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites

RU-GOST R, Composite three-point bending

GOST R 57866-2017 Polymer composites. Determination of flexural properties
GOST R 56805-2015 Polymer composites. Methods for determination of flexural properties
GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
GOST R 56681-2015 Polymer composites. Determination of mechanical characteristics by compression of unidirectional reinforcement materials by four-point bending of sandwich beam
GOST R 57843-2017 Wood polymer composites. Test methods for determination of flexural mechanical properties
GOST R 56810-2015 Polymer composites. Test method for flexural flat samples
GOST R 58022-2017 Polymer composite crossarms. Method for determination of flexural mechanical properties
GOST R 57732-2017 Polymer composites. Determination of strength of adhesive bonded joints using a bending-shear method
GOST R 56798-2015 Polymer composites. Method for determination the mechanical characteristics of sandwich constructions flexural
GOST R 57852-2017 Composites. Method for determination of test specimens bending under tensile and compressive forces application
GOST R 56657-2015 Polymer composites. Method for determination of flexural properties of glass-fibre reinforced pultruded plastic rods
GOST R 56791-2015 Polymer composites. Determination of mechanical characteristics of shear of the inner layer of sandwich constructions by beam flexure

British Standards Institution (BSI), Composite three-point bending

18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN ISO 14125:1998+A1:2011 Fibre-reinforced plastic composites. Determination of flexural properties
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Composite three-point bending

GB/T 33099-2016 Test methods of stiffness for dipped reinforcing material—Three-point bending
GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites

German Institute for Standardization, Composite three-point bending

DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN ISO 14125:2011-05 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001 + Amd.1:2011); German version EN ISO 14125:1998 + AC:2002 + A1:2011
DIN EN 658-5:2003-03 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002
DIN EN ISO 14125:2011 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Amd 1:2011); German version EN ISO 14125:1998 + A1:2011

国家市场监督管理总局、中国国家标准化管理委员会, Composite three-point bending

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 35465.5-2020 Test method for fatigue properties of polymer matrix composite materials—Part 5: Flexural fatigue
GB/T 40398.2-2021 Test method for C-C composites—Part 2: Flexural properties

Danish Standards Foundation, Composite three-point bending

DS/EN ISO 14125/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125/Corr.1:2002 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125:1999 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
DS/ENV 658-5:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)
DS/EN 12788:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength
DS/EN 12789:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
DS/EN 658-3:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength

Korean Agency for Technology and Standards (KATS), Composite three-point bending

KS M ISO 14125-2012(2017) Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14125-2012(2022) Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 12986-1-2004(2009) Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method

ES-UNE, Composite three-point bending

UNE-EN ISO 14125/AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties. (ISO 14125:1998/Cor. 1:2001)
UNE-EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) (Endorsed by AENOR in February of 2003.)
UNE-EN 12788:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength (Endorsed by AENOR in October of 2005.)

GOSTR, Composite three-point bending

GOST R 56680-2015 Polymer composites. Determination facing’s mechanical flexural properties of sandwich construction by long beam flexure method

Professional Standard - Aviation, Composite three-point bending

HB 7624-1998 Bending fatigue test method for carbon fiber composite laminates
HB 7617-1998 Test method for flexural properties of fiber reinforced metal matrix composite laminates

Society of Automotive Engineers (SAE), Composite three-point bending

SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test

Lithuanian Standards Office , Composite three-point bending

LST EN ISO 14125+AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998)
LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
LST EN ISO 14125+AC:2002/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1 (ISO 14125:1998/Amd.1:2011)
LST EN 658-3-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength
LST EN 12789-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
LST EN 12788-2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength

AENOR, Composite three-point bending

UNE-EN ISO 14125:1999 FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998)
UNE-EN ISO 14125:1999/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1 (ISO 14125:1998/Amd 1:2011)

Group Standards of the People's Republic of China, Composite three-point bending

T/CSRA 12-2021 Test method for flexural properties of aramid fiber Ⅲ reinforced materials
T/CSTM 00485-2022 Test method for flexural properties of fiber reinforced polymer matrix composite laminates

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Composite three-point bending

GB/T 3356-2014 Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials
GB/T 14208-1993 Textile glass--Rovings--Determination of flexural strength of rod composites

工业和信息化部/国家能源局, Composite three-point bending

JB/T 13227-2017 In-situ bending-torsion composite mechanical properties testing system for solid materials
JB/T 13223-2017 In-situ tensile-bending composite mechanical property testing system for solid materials
JB/T 13224-2017 In-situ tensile-bending-torsion composite mechanical property testing system for solid materials

Japanese Industrial Standards Committee (JISC), Composite three-point bending

JIS R 1663:2004 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites
JIS R 1663:2017 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites at room temperature

工业和信息化部, Composite three-point bending

JC/T 2405-2017 Test method for flexural strength of continuous fiber reinforced ceramic matrix composites at room temperature

未注明发布机构, Composite three-point bending

DIN EN ISO 17138:2022 High-performance ceramics – Mechanical properties of ceramic composite materials at room temperature – Determination of flexural strength

NL-NEN, Composite three-point bending

NVN-ENV 658-5-1994 Advanced technical ceramics. Mechanical properties for ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)
NVN-ENV 658-3-1992 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Part 3: Determination of flexural strength

European Committee for Standardization (CEN), Composite three-point bending

DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)