ZH
RU
ES

Three-point bending test of composite materials

Three-point bending test of composite materials, Total:151 items.

In the international standard classification, Three-point bending test of composite materials involves: Plastics, Reinforced plastics, Products of the textile industry, Construction materials, Inorganic chemicals, Materials for the reinforcement of composites, Refractories, Rubber and plastics products, Road vehicle systems, Paper and board, Ceramics, Mechanical testing, Welding, brazing and soldering, Textile fibres, Conducting materials, Adhesives, Waxes, bituminous materials and other petroleum products, Insulating materials, Products of the chemical industry, Raw materials for rubber and plastics, Semiconductor devices.

Association Francaise de Normalisation, Three-point bending test of composite materials

NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF T51-120-4:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 4 : essai en flexion quatre points sur éprouvettes non encastrées.
NF T51-120-5:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 5 : essai en flexion à moment constant.
NF EN ISO 14125:1998 Composites plastiques renforcés de fibres - Détermination des propriétés de flexion
NF T51-120-2:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 2 : essai en flexion sur éprouvettes encastrées.
NF T51-120-6:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 6 : essai de flexion par flambement.
NF T57-105/A1*NF EN ISO 14125/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1.
NF EN ISO 14125/A1:2011 Composites plastiques renforcés de fibres - Détermination des propriétés de flexion - Amendement 1
NF EN ISO 14130:1998 Composites plastiques renforcés de fibres - Détermination de la résistance au cisaillement interlaminaire apparent par essai de flexion sur appuis rapprochés
NF T51-120-1:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 1 : principes généraux.
NF B43-205*NF EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5 : determination of interlaminar shear strength by short span bend test (three points).
NF T57-303:1989 PLASTICS. CARBON REINFORCED COMPOSITES. DETERMINATION OF INTERLAMINAR SHEAR STRENGTH. FLEXURE METHOD WITH SHORT SPAN LENGHT.
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF EN ISO 17138:2022 Céramiques techniques - Propriétés mécaniques des composites céramiques à température ambiante - Détermination de la résistance en flexion
NF EN 658-5:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à température ambiante - Partie 5 : détermination de la résistance au cisaillement interlaminaire par essai de flexion sur appuis rapprochés (trois points)

American Society for Testing and Materials (ASTM), Three-point bending test of composite materials

ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D7264/D7264M-07 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-06 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM C1341-13(2023) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM D6415/D6415M-06ae1 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-06 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM C1341-00(2005) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C1341-00 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C1341-06 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C1341-13(2018) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D6416/D6416M-99 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM D6416/D6416M-01 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM D6416/D6416M-01e1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM D6416/D6416M-16e1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM D6416/D6416M-16 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6415/D6415M-06a(2013) Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

International Organization for Standardization (ISO), Three-point bending test of composite materials

ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 14125:1998/Amd 1:2011 Fibre-reinforced plastic composites - Determination of flexural properties; Amendment 1
ISO 14125:1998/cor 1:2001 Fibre-reinforced plastic composites - Determination of flexural properties; Technical Corrigendum 1

British Standards Institution (BSI), Three-point bending test of composite materials

18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN ISO 14125:1998+A1:2011 Fibre-reinforced plastic composites. Determination of flexural properties
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS IEC 62047-31:2019 Semiconductor devices. Micro-electromechanical devices - Four-point bending test method for interfacial adhesion energy of layered MEMS materials
BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method

Professional Standard - Aerospace, Three-point bending test of composite materials

QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials

German Institute for Standardization, Three-point bending test of composite materials

DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN ISO 14125:2011-05 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001 + Amd.1:2011); German version EN ISO 14125:1998 + AC:2002 + A1:2011
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2009 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN EN 658-5:2003-03 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002
DIN 51944 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigendum to DIN 51944:1999-01
DIN 51944 Corrigendum 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Soild materials Corrigendum 1 to English version of DIN 51944:1999-01
DIN EN ISO 14125:2011 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Amd 1:2011); German version EN ISO 14125:1998 + A1:2011
DIN EN 12789:2003-01 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength; German version EN 12789:2002
DIN EN 12788:2005-11 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength; German version EN 12788:2005
DIN EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002
DIN SPEC 1026:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010

Professional Standard - Textile, Three-point bending test of composite materials

FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites

AENOR, Three-point bending test of composite materials

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN ISO 14125:1999 FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998)
UNE-EN ISO 14125:1999/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1 (ISO 14125:1998/Amd 1:2011)

RU-GOST R, Three-point bending test of composite materials

GOST R 57866-2017 Polymer composites. Determination of flexural properties
GOST R 56805-2015 Polymer composites. Methods for determination of flexural properties
GOST R 57843-2017 Wood polymer composites. Test methods for determination of flexural mechanical properties
GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
GOST R 56681-2015 Polymer composites. Determination of mechanical characteristics by compression of unidirectional reinforcement materials by four-point bending of sandwich beam
GOST R 56810-2015 Polymer composites. Test method for flexural flat samples
GOST R 57852-2017 Composites. Method for determination of test specimens bending under tensile and compressive forces application
GOST R 58022-2017 Polymer composite crossarms. Method for determination of flexural mechanical properties
GOST R 57732-2017 Polymer composites. Determination of strength of adhesive bonded joints using a bending-shear method
GOST R 56798-2015 Polymer composites. Method for determination the mechanical characteristics of sandwich constructions flexural
GOST R 56657-2015 Polymer composites. Method for determination of flexural properties of glass-fibre reinforced pultruded plastic rods
GOST R 56791-2015 Polymer composites. Determination of mechanical characteristics of shear of the inner layer of sandwich constructions by beam flexure
GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures

国家市场监督管理总局、中国国家标准化管理委员会, Three-point bending test of composite materials

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 35465.5-2020 Test method for fatigue properties of polymer matrix composite materials—Part 5: Flexural fatigue
GB/T 40398.2-2021 Test method for C-C composites—Part 2: Flexural properties

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three-point bending test of composite materials

GB/T 33099-2016 Test methods of stiffness for dipped reinforcing material—Three-point bending
GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites

Society of Automotive Engineers (SAE), Three-point bending test of composite materials

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

Danish Standards Foundation, Three-point bending test of composite materials

DS/EN ISO 14125/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125/Corr.1:2002 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125:1999 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
DS/ENV 658-5:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/EN 12788:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength
DS/EN 12789:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
DS/EN 658-3:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength

Korean Agency for Technology and Standards (KATS), Three-point bending test of composite materials

KS M ISO 14125-2012(2017) Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14125-2012(2022) Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 12986-1-2004(2009) Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method

ES-UNE, Three-point bending test of composite materials

UNE-EN ISO 14125/AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties. (ISO 14125:1998/Cor. 1:2001)
UNE-EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) (Endorsed by AENOR in February of 2003.)
UNE-EN 12788:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength (Endorsed by AENOR in October of 2005.)
UNE-EN 12789:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength (Endorsed by AENOR in July of 2003.)

Professional Standard - Aviation, Three-point bending test of composite materials

HB 7624-1998 Bending fatigue test method for carbon fiber composite laminates
HB 7617-1998 Test method for flexural properties of fiber reinforced metal matrix composite laminates

工业和信息化部/国家能源局, Three-point bending test of composite materials

JB/T 13227-2017 In-situ bending-torsion composite mechanical properties testing system for solid materials
JB/T 13223-2017 In-situ tensile-bending composite mechanical property testing system for solid materials
JB/T 13224-2017 In-situ tensile-bending-torsion composite mechanical property testing system for solid materials

GOSTR, Three-point bending test of composite materials

GOST R 56680-2015 Polymer composites. Determination facing’s mechanical flexural properties of sandwich construction by long beam flexure method

Lithuanian Standards Office , Three-point bending test of composite materials

LST EN ISO 14125+AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998)
LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
LST EN ISO 14125+AC:2002/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1 (ISO 14125:1998/Amd.1:2011)
LST EN 658-3-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength
LST EN 12789-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
LST EN 12788-2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength

Group Standards of the People's Republic of China, Three-point bending test of composite materials

T/CSRA 12-2021 Test method for flexural properties of aramid fiber Ⅲ reinforced materials
T/CSTM 00485-2022 Test method for flexural properties of fiber reinforced polymer matrix composite laminates

Malaysia Standards, Three-point bending test of composite materials

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three-point bending test of composite materials

GB/T 3356-2014 Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials
GB/T 14208-1993 Textile glass--Rovings--Determination of flexural strength of rod composites

European Committee for Standardization (CEN), Three-point bending test of composite materials

EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)
DD ENV 12789-1998 Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temperature under Air at Atmospheric Pressure - Determination of Flexural Strength

Japanese Industrial Standards Committee (JISC), Three-point bending test of composite materials

JIS R 1663:2004 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites
JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
JIS R 1663:2017 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites at room temperature

European Association of Aerospace Industries, Three-point bending test of composite materials

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1

工业和信息化部, Three-point bending test of composite materials

JC/T 2405-2017 Test method for flexural strength of continuous fiber reinforced ceramic matrix composites at room temperature

未注明发布机构, Three-point bending test of composite materials

DIN EN ISO 17138:2022 High-performance ceramics – Mechanical properties of ceramic composite materials at room temperature – Determination of flexural strength
BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

NL-NEN, Three-point bending test of composite materials

NVN-ENV 658-5-1994 Advanced technical ceramics. Mechanical properties for ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)
NVN-ENV 658-3-1992 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Part 3: Determination of flexural strength

International Electrotechnical Commission (IEC), Three-point bending test of composite materials

IEC 62047-31:2019 Semiconductor devices - Micro-electromechanical devices - Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials