ZH
RU
ES

moisture in the gel

moisture in the gel, Total:498 items.

In the international standard classification, moisture in the gel involves: Pharmaceutics, Cork and cork products, Construction materials, Adhesives, Construction industry, Raw materials for rubber and plastics, Protection of and in buildings, Meat, meat products and other animal produce, Products of the textile industry, Medical equipment, Tobacco, tobacco products and related equipment, External sewage systems, Analytical chemistry, Paint ingredients, Miscellaneous domestic and commercial equipment, Iron and steel products, Non-metalliferous minerals, Plastics, Structures of buildings, Paper and board, Water quality, Fruits. Vegetables, Rubber and plastics products, Road engineering, Pipeline components and pipelines, Sterilization and disinfection, Photography, Milk and milk products, Wood-based panels, Thermodynamics and temperature measurements, Installations in buildings, Rubber, Products of the chemical industry, Spices and condiments. Food additives, Paints and varnishes, Surface treatment and coating, Corrosion of metals, Equipment for petroleum and natural gas industries, Insulating materials, General methods of tests and analysis for food products, Extraction and processing of petroleum and natural gas, Textile fibres, Road vehicle systems, Fasteners, Food products in general, Animal feeding stuffs, Vocabularies, Materials for aerospace construction, Construction of airports.

American Society for Testing and Materials (ASTM), moisture in the gel

ASTM F2900-11 Standard Guide for Characterization of Hydrogels used in Regenerative Medicine
ASTM D8329-20 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
ASTM D8329-21 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
ASTM F2551-09 Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
ASTM C1438-11 Standard Specification for Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar
ASTM C1438-11a Standard Specification for Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar
ASTM C1438-13 Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
ASTM C688-14 Standard Specification for Functional Additions for Use in Hydraulic Cements
ASTM C1709-18 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
ASTM D3596-19 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
ASTM D5460-02(2012) Standard Test Method for Rubber Compounding Materialsmdash;Water in Rubber Additives
ASTM D4263-83(1999) Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
ASTM D4263-83(2018) Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
ASTM D5165-12(2020) Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
ASTM D4188-17 Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water
ASTM D5460-93(1998) Standard Test Method for Rubber Compounding Materials-Water in Rubber Additives
ASTM D5460-02(2006) Standard Test Method for Rubber Compounding Materials-Water in Rubber Additives
ASTM D5460-02(2021)e1 Standard Test Method for Rubber Compounding Materials—Water in Rubber Additives
ASTM C505M-99a Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
ASTM D3596-09 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
ASTM D3596-13 Standard Practice for Determination of Gels lpar;Fisheyesrpar; In General-Purpose Polylpar;Vinyl Chloriderpar; lpar;PVCrpar; Resins
ASTM D5460-02 Standard Test Method for Rubber Compounding Materials—Water in Rubber Additives
ASTM C1628-17e1 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
ASTM C1628-19 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
ASTM C1628-17 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
ASTM C1702-09a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-17 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-13 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-14 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1241-00(2005) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C114-03 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C114-00 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C114-04a Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C114-04 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C114-11b Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C114-11be1 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C505-15 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
ASTM C1084-19 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
ASTM C989/C989M-14 Standard Specification for Slag Cement for Use in Concrete and Mortars
ASTM C989/C989M-16 Standard Specification for Slag Cement for Use in Concrete and Mortars
ASTM C989/C989M-16e1 Standard Specification for Slag Cement for Use in Concrete and Mortars
ASTM C1438-13(2017) Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
ASTM C1702-15 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-15b Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D5460-02(2017) Standard Test Method for Rubber Compounding Materials&x2014;Water in Rubber Additives
ASTM C1702-13a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C505-99a Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints
ASTM C505-05a Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
ASTM C505-05 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints
ASTM C505-03 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints
ASTM C1628-06 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
ASTM D3596-92 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
ASTM D3596-92(2001) Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
ASTM C114-09 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM D5249-10(2016) Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
ASTM C1628-11 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
ASTM E1482-12(2017) Standard Practice for Use of Gel Filtration Columns for Cytotoxicity Reduction and Neutralization
ASTM E1482-12 Standard Practice for Use of Gel Filtration Columns for Cytotoxicity Reduction and Neutralization
ASTM F2315-18 Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels
ASTM D4867/D4867M-04 Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
ASTM C443-01 Standard Specification for Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets
ASTM C443-98 Standard Specification for Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets
ASTM C505M-15 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
ASTM F2315-11 Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels
ASTM C1785-13 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
ASTM C1218/C1218M-99(2008) Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
ASTM C989-09a Standard Specification for Slag Cement for Use in Concrete and Mortars
ASTM C989-10 Standard Specification for Slag Cement for Use in Concrete and Mortars
ASTM F2042-00(2005) Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication
ASTM F2042-00 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication
ASTM F2042-18 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication
ASTM F2042-00e1 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication
ASTM C505M-03 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
ASTM C505M-04 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
ASTM C505M-05a Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
ASTM C505M-05 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
ASTM E1482-23 Standard Practice for Use of Gel Filtration Columns for Cytotoxicity Reduction and Neutralization
ASTM C1012-03 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
ASTM C1012-04 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
ASTM C1218/C1218M-99 Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
ASTM C1218/C1218M-20 Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
ASTM C1218/C1218M-15 Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
ASTM C1218/C1218M-17 Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
ASTM D5824-98(2023) Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM F2038-00e1 Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part I - Formulations and Uncured Materials
ASTM F2038-00 Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part I - Formulations and Uncured Materials
ASTM C443M-01 Standard Specification for Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets (Metric)
ASTM C443M-98 Standard Specification for Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets (Metric)
ASTM D3581-96 Standard Specification for Joint Sealant, Hot-Applied, Jet-Fuel-Resistant Type, for Portland Cement Concrete and Tar-Concrete Pavements
ASTM D3581-02 Standard Specification for Joint Sealant, Hot-Applied, Jet-Fuel-Resistant Type, for Portland Cement Concrete and Tar-Concrete Pavements
ASTM D5893/D5893M-10 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
ASTM D5712-15(2020) Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method
ASTM C563-07 Standard Test Method for Approximation of Optimum SO₃ in Hydraulic Cement Using Compressive Strength
ASTM D5712-15 Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method
ASTM C1439-19 Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
ASTM D7116-05 Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements

Association Francaise de Normalisation, moisture in the gel

NF B57-043:1974 Expanded pure agglomerated cork. Determination of moisture content.
NF EN ISO 13885-3:2021 Chromatographie par perméation de gel (GPC) - Partie 3 : eluant à l'eau
NF EN 14693:2017 Feuilles souples d'étanchéité - Étanchéité des tabliers de ponts en béton et autres surfaces en béton circulables par les véhicules - Détermination du comportement des feuilles d'étanchéité lors de l'application de l'asphalte coulé
NF E04-743-1:2017 Gel ink ball pens and refills - Part 1 : general use
NF T30-319-3*NF EN ISO 13885-3:2021 Gel permeation chromatography (GPC) - Part 3 : water as eluent
NF P18-425:2008 Concrete - Freeze test on hardened concrete - Freeze in air - Thaw in water
NF T42-007:1973 RUBBER AND SIMILAR ELASTOMERS. DETERMINATION OF AQUEOUS EXTRACT OF NATURAL RUBBER LATEX.
NF P18-211*NF EN 1008:2003 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
NF T76-113:2021 Water-based adhesives - Aminoplastics - Conventional determination of gel setting time at different temperatures
NF V37-011:2000 Cigarettes - Determination of water in smoke condensates - Part 1 : gas-chromatographic method.
NF V37-011-2*NF ISO 10362-2:2013 Cigarettes - Determination of water in smoke condensates - Part 2 : Karl Fischer method
NF P18-010:1985 Concrete. Classification and designation of hydraulic concrete.
NF ISO 10362-2:2013 Cigarettes - Dosage de l'eau dans les condensats de fumée - Partie 2 : méthode de Karl Fischer
NF P98-128:2014 Road foundations and roadbeds - Road roller-compacted concretes and high performances aggregates treated with hydraulic binders - Definition, composition and classification
NF EN 12436:2002 Colles pour structures portantes en bois - Colles caséine - Classification et exigences de performance
NF P98-621:1991 Horizontal road marking. Markings applied on the roads. Analysis of binders by semi-preparative gel permeation chromatography.
NF V59-003:1982 Gélatine alimentaire - Détermination de l'humidité et des cendres
NF X20-379:1979 Gas analysis. Oxygen analysis. Electrochemical methods with liquid or gelled electrolyte.
NF T76-113:1983 Water adhesives. Aminoplastic. Determination of conventional gel time at different temperatures.
NF EN ISO 10426-6:2010 Industries du pétrole et du gaz naturel - Ciments et matériaux pour la cimentation des puits - Partie 6 : méthodes de détermination de la force du gel statique des formulations de ciment
NF P18-327-2*NF EN 14845-2:2007 Test methods for fibres in concrete - Part 2 : effect on concrete
NF EN 14845-1:2007 Méthodes d'essai des fibres dans le béton - Partie 1 : bétons de référence
NF P18-449*NF EN 13577:2007 Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
FD T45-044*FD ISO/TR 16098:2014 Reclaimed rubbers and reclaimed crumb rubbers - Evaluation of dispersion in rubber mixes
NF P98-880-12*NF EN 13880-12:2004 Hot applied joint sealants - Part 12 : test methods for the manufacture of concrete test blocks for bond testing (recipe methods)
NF V37-011/A1:2011 Cigarettes - Determination of water in smoke condensates - Part 1 : gas-chromatographic method - Amendment 1.
NF T30-077-2:2006 Paints and varnishes - Determination of resistance to humidity - Part 2 : procedure for exposing test specimens in condensation-water atmospheres.
NF EN ISO 6270-2:2018 Peintures et vernis - Détermination de la résistance à l'humidité - Partie 2 : condensation (exposition en enceinte avec réservoir à eau chauffée)
NF T76-407*NF EN 12706:2000 Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics
FD ISO/TR 16098:2014 Caoutchoucs régénérés et poudrettes de caoutchoucs régénérés - Évaluation de la dispersion dans les mélanges de caoutchouc
NF P18-310-4*NF EN 480-4:2006 Admixtures for concrete, mortar and grout - Test methods - Part 4 : determination of bleeding of concrete
NF T45-007-2:2006 Rubber compounding ingredients - Silica, precipitated, hydrated - Part 2 : evaluation procedures in styrene-butadiene rubber.
NF T76-117:1984 Water based adhesives. Resorcinol formaldehyde, resorcinol-phenol formaldehyde. Conventional determination of gel setting time at 23 degrees C.

Group Standards of the People's Republic of China, moisture in the gel

T/GBMEA 01-2023 New low carbon cementitious material used in concrete
T/CECS 10189-2022 Concrete Water Reducer Molecular Weight Test Gel Permeation Chromatography
T/QGCML 346-2022 Test methods for airgel waterproofing membranes
T/CECS 10100-2020 Copper tailings powder used in cement and concrete
T/CECS 10225-2022 Molybdenum tailings fine powder used in cement and concrete
T/JXJK 007-2022 Determination of ethanol concentration in disinfection products by gas chromatography
T/ZGM 021-2022 Assessment requirements for quality grading and forerunner Gel ion exchange resins in mixed-bed for condensate polishing treatment
T/CECS 10103-2020 Lead-zinc or iron tailings micro-powder used for cement and concrete
T/CBMF 8-2015 Micropowder for ceramic tile polishing in cement and concrete
T/CAICC 05-2021 Rapid detection of isocarbophos in Chinese medicinal materials —Colloidal gold immunochromatography
T/CCAS 008-2019 Analytical methods of the ammonia in fly ash for cement and concrete
T/CNHFA 003-2022 Qualitative detection of bovine milk casein in milk and dairy products— Capillary gel electrophoresis method
T/CAMDI 076-2022 Gel chromatography method for molecular weight and distribution of polysulfone specialty for medical devices

RU-GOST R, moisture in the gel

GOST 25717-1983 Adhesives. Methods of determination of shear modulus of adhesive in adhesive bond
GOST 26454-1985 Adhesives. Method for determination of elasticity modulus of adhesive in adhesive bond
GOST R 50187-1992 Canned meat. Poultry meat in gel. Specifications
GOST 30622.1-2003 Cigarettes. Determination of water content in smoke condensate. Gas-chromatographic method
GOST 30622.1-1998 Cigarettes. Determination of water in smoke condensates. Gas-chromatographic method
GOST 30758-2001 Corrugated fibreboard. Method for determination of the water resistance of the qlue bond by immersion in water
GOST 30622.2-1998 Cigarettes. Determination of water in smoke condensates. Karl Fischer method
GOST R 53761-2009 Milk. The identification of protein composition by use the electrophoresis in polyakrilamide gel
GOST R 51973-2002 Cigarettes. Determination of water content in smoke condensate. Gas-chromatographic method
GOST 33528-2015 Milk and milk products. Identification of protein composition by use of electrophoresis in polyacrylamide gel

International Organization for Standardization (ISO), moisture in the gel

ISO 17278:2013 Rubber, raw natural.Determination of the gel content of technically specified rubber (TSR)
ISO 10339:1997 Ophthalmic optics - Contact lenses - Determination of water content of hydrogel lenses
ISO 13885-3:2020 Gel permeation chromatography (GPC) — Part 3: Water as eluent
ISO/TR 16475:2011 Guidelines for the repair of water-leakage cracks in concrete structures
ISO 10362-1:1999 Cigarettes - Determination of water in smoke condensates - Part 1: Gas-chromatographic method
ISO 10362-2:1994 Cigarettes; determination of water in smoke condensates; part 2: Karl Fischer method
ISO 10362-1:1991 Cigarettes; determination of water in smoke condensates; part 1: gas-chromatographic method
ISO 9339-2:1998 Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses
ISO 10362-2:2013 Cigarettes.Determination of water in smoke condensates.Part 2: Karl Fischer method
ISO 6270-2:2017 Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
ISO 10362-2:1994/Amd 1:2011 Cigarettes - Determination of water in smoke condensates - Part 2: Karl Fischer method; Amendment 1
ISO 10362-1:1999/Amd 1:2011 Cigarettes - Determination of water in smoke condensates - Part 1: Gas-chromatographic method; Amendment 1
ISO 11344:2004 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
ISO 11344:2016 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
ISO 6270-2:2005 Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres
ISO 9339-2:1998/Cor 1:2000 Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses; Technical Corrigendum 1
ISO 1920-9:2009 Testing of concrete - Part 9: Determination of creep of concrete cylinders in compression
ISO 5794-3:2011 Rubber compounding ingredients - Silica, precipitated, hydrated - Part 3: Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)
ISO 10426-6:2008 Petroleum and natural gas industries - Cements and materials for well cementing - Part 6: Methods for determining the static gel strength of cement formulations
ISO/FDIS 18562-4:2014 Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 4: Tests for leachables in condensate
ISO 8321-2:2000 Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 2: Single-vision hydrogel contact lenses
ISO 5794-2:1998 Rubber compounding ingredients - Silica, precipitated, hydrated - Part 2: Evaluation procedures in styrene-butadiene rubber
ISO 5794-2:2014 Rubber compounding ingredients - Silica, precipitated, hydrated - Part 2: Evaluation procedures in styrene-butadiene rubber

British Standards Institution (BSI), moisture in the gel

BS ISO 17278:2013 Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
15/30324381 DC BS EN 14944-4. Influence of cementitious products on water intended for human consumption. Test methods. Part 4. Migration of substances from site-applied cementititous materials and associated non-cementitious products/materials
BS EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
19/30397408 DC BS ISO 13885-3. Gel permeation chromatography. Part 3. Water as eluent
BS EN 14693:2017 Tracked Changes. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the behaviour of bitumen sheets during application of mastic asphalt
BS ISO 11344:2004 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
BS ISO 11344:2016 Rubber, raw synthetic. Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
BS ISO 10362-2:2013 Cigarettes. Determination of water in smoke condensates. Karl Fischer method
BS ISO 10362-1:1999+A1:2011 Cigarettes. Determination of water in smoke condensates. Gas-chromatographic method
16/30344445 DC BS EN 17048. Flexible sheets for waterproofing. Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete. Definitions and characteristics
BS EN 14693:2006 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt
PD ISO/TR 16098:2012 Reclaimed rubbers and reclaimed crumb rubbers. Evaluation of dispersion in rubber mixes
BS 5350-B5:1976 Methods of test for adhesives - Determination of gelation time
BS EN ISO 10426-6:2008 Petroleum and natural gas industries - Cements and materials for well cementing - Methods for determining the static gel strength of cement formulations (ISO 10426-6:2008)

ACI - American Concrete Institute, moisture in the gel

ACI 329.1T-2018 Minimum Cementitious Materials Content in Specifications
ACI 233R-1995 Ground Granulated Blast-Furnace Slag as a Cementitious Constituent in Concrete
ACI 226.1R-1987 Ground Granulated Blast-Furnace Slag as a Cementitious Constituent in Concrete
ACI 233R-2003 Slag Cement in Concrete and Mortar
ACI 210R-1993 Erosion of Concrete in Hydraulic Structures
ACI 355.4-2011 Qualification of Post-Installed Adhesive Anchors in Concrete (ACI 355.4) and Commentary
ACI 355.4M-2011 Qualification of Post-Installed Adhesive Anchors in Concrete (ACI 355.4M-11) and Commentary
ACI SP-119-1989 Superplasticizers and Other Chemical Admixtures in Concrete
ACI SP-195-2000 Superplasticizers and Other Chemical Admixtures in Concrete
ACI SP-239-2006 Superplasticizers and Other Chemical Admixtures in Concrete
ACI SP-329-2018 Superplasticizers and Other Chemical Admixtures in Concrete
ACI 503.6R-1997 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes
ACI 548.11R-2012 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes

AENOR, moisture in the gel

UNE 7142:1958 DETERMINATION OF EXUDATION WATER IN CONCRETE.
UNE-ISO 10362-2:2010 Cigarettes. Determinación of water in smoke condensates. Part 2: Karl Fischer method.
UNE-EN 1008:2007 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
UNE-ISO 10362-1:2010 Cigarettes -- Determination of water in smoke condensates -- Part 1: Gas-chromatographic method.
UNE 83980:2014 Concrete durability. Test methods. Determination of the water absorption, density and accessible porosity for water in concrete.
UNE 84602:1996 COSMETIC RAW MATERIALS. ORGANIC ACIDS IN SATURATED HYDROCARBONS OBTAINED FROM PETROLEUM (LIQUID, JELLY AND SOLID).
UNE-EN 14845-2:2007 Test methods for fibres in concrete - Part 2: Effect on concrete
UNE 84606:2012 Cosmetic raw materials. Aromatic compounds in saturated hydrocarbons (jelly and solid) obtained from petroleum.
UNE-EN 14845-1:2008 Test methods for fibres in concrete - Part 1: Reference concretes
UNE-EN 480-4:2006 Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete
UNE-EN 13577:2008 Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
UNE-EN 1353:1997 DETERMINATION OF MOISTURE CONTENT OF AUTOCLAVED AERATED CONCRETE.
UNE-EN 14649:2006 Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST)
UNE 83431:1992 ADDITIONS FOR CONCRETE. FLY ASK. DETERMINATION OF MOISTURE CONTENT

IT-UNI, moisture in the gel

European Committee for Standardization (CEN), moisture in the gel

EN ISO 10339:1999 Ophthalmic Optics - Contact Lenses - Determination of Water Content of Hydrogel Lenses ISO 10339: 1997
EN ISO 13885-3:2021 Gel permeation chromatography (GPC) - Part 3: Water as eluent (ISO 13885-3:2020)
EN ISO 9339-2:1998 Optics and Optical Instruments - Contact Lenses - Determination of Thickness - Part 2: Hydrogel Contact Lenses ISO 9339-2:1998
EN 1243:1998 Adhesives - Determination of Free Formaldehyde in Amino and Amidoformaldehyde Condensates
EN 480-11:2005 Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete
EN 480-11:1998 Admixtures for Concrete, Mortar and Grout - Test Methods - Part 11: Determination of Air Void Characteristics in Hardened Concrete
EN ISO 10426-6:2008 Petroleum and natural gas industries - Cements and materials for well cementing - Part 6: Methods for determining the static gel strength of cement formulations
EN 14693:2006 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt
EN 14693:2017 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt
EN 13577:2007 Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
EN 772-10:1999 Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units
EN 13877-3:2004 Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements
EN 196-5:2005 Methods of testing cement Part 5: Pozzolanicity test for pozzolanic cement
EN 14649:2005 Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST)

ES-AENOR, moisture in the gel

Korean Agency for Technology and Standards (KATS), moisture in the gel

KS H ISO 10362-2-2015(2020) Cigarettes - Determination of water in smoke condensates - Part 2 : Karl fischer method
KS H ISO 10362-1:2013 Cigarettes-Determination of water in smoke condensates-Part 1:Gas-chromatographic method
KS H ISO 10362-2:2013 Cigarettes-Determination of water in smoke condensates-Part 2:Karl Fischer method
KS H ISO 10362-2:2008 Cigarettes-Determination of water in smoke condensates-Part 2:Karl Fischer method
KS H ISO 10362-1:2008 Cigarettes-Determination of water in smoke condensates-Part 1:Gas-chromatographic method
KS H ISO 10362-2:2015 Cigarettes - Determination of water in smoke condensates - Part 2 : Karl fischer method
KS F 2715-2002 Testing method for water-soluble chloride in mortar and concrete
KS M ISO 11344-2017(2022) Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
KS M 6668-2016 Test method for dispersability of reclaimed rubber in rubber compound
KS F 2715-2017(2022) Testing method for water-soluble chloride in mortar and concrete
KS F 2715-2017 Testing method for water-soluble chloride in mortar and concrete
KS M ISO 11344:2007 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
KS M ISO 11344:2017 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
KS F 2714-2002 Testing method for acid-soluble chloride in mortar and concrete
KS B ISO 9339-2:2004 Optics and optical instruments-Contact lenses-Determination of thickness-Part 2:Hydrogel contact lenses
KS B ISO 9339-2:2014 Optics and optical instruments — Contact lenses — Determination of thickness — Part 2: Hydrogel contact lenses
KS B ISO 9339-2-2014(2019) Optics and optical instruments — Contact lenses — Determination of thickness — Part 2: Hydrogel contact lenses
KS F 2713-2017(2022) Testing method for analysis of chloride in concrete and concrete raw materials
KS M ISO 6270-2-2011(2016) Paints and varnishes－Determination of resistance to humidity－Part 2：Procedure for exposing test specimens in condensation-water atmospheres
KS M 6668-2016(2021) Test method for dispersability of reclaimed rubber in rubber compound
KS M ISO 5794-2:2012 Rubber compounding ingredients－Silica, precipitated, hydrated－Part 2：Evaluation procedures in styrene-butadiene rubber
KS M ISO 5794-2:2017 Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2:Evaluation procedures in styrene-butadiene rubber

(U.S.) Ford Automotive Standards, moisture in the gel

FORD FLTM EU-BP 053-02-2001 TEST FOR STAINING OF PAINT BY WATER EXRACTABLE INGREDIENTS IN RUBBER
FORD FLTM EU-BP 053-2-2001 TEST FOR STAINING OF PAINT BY WATER EXRACTABLE INGREDIENTS IN RUBBER
FORD WSF-M99G165-A-1992 ENCAPSULANT, SILICONE GEL, ONE COMPONENT PLATINUM CURE

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, moisture in the gel

GB/T 28601-2012 Rubber compounding ingredients.Silica,precipitated,hydrated.Determination of gelatin content
GB/T 31816-2015 Water treatment chemicals.Determination of the molecular weight and molecular weight distribution of polymers.Gel filtration chromatography
GB/T 1596-1991 Fly ash used for cement and concrete
GB/T 1596-2005 Fly ash used for cement and concrete
GB/T 20491-2006 Steel slag powder used for cement and concrete
GB/T 18046-2000 Ground granulated blast furnace slag used for cement and concrete
GB/T 18046-2008 Ground granulated blast furnace slag used for cement and concrete
GB/T 26751-2011 Ground granulated electirc furnace phosphorous slag powder used for cement and concrete
GB/T 26751-2022 Ground granulated electirc furnace phosphorous slag powder used for cement and concrete
GB/T 30810-2014 Test methods for leachable ions of heavy metals in cement mortar
GB/T 12375-1990 Analytical method of tritium in water
GB/T 11224-1989 Analytical method of thonium in water
GB/T 11225-1989 Analytical method of plutonium in water
GB/T 5009.3-2003 Determination of moisture in foods
GB/T 6435-2014 Determination of moisture in feedstuffs

TR-TSE, moisture in the gel

TS 687-1979 CHEMICAL ANALYSIS OF HYDRAULIC CEMENT
TS 336-1966 DETERMINATION OF ASH ?N RAW NATURAL RUBBER

German Institute for Standardization, moisture in the gel

DIN EN 14693:2006 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt; English version of DIN EN 14693:2006-11
DIN EN ISO 13885-3:2021-11 Gel permeation chromatography (GPC) - Part 3: Water as eluent (ISO 13885-3:2020); German version EN ISO 13885-3:2021
DIN 1186-1:2022-10 Interlocking concrete revetments in hydraulic engineering - Part 1: Requirements / Note: Date of issue 2022-09-09
DIN 55672-3:2016-03 Gel permeation chromatography (GPC) - Part 3: Water as elution solvent
DIN 55672-3:2007 Gel permeation chromatography (GPC) - Part 3: Water as elution solvent
DIN EN 1008:2002-10 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete; German version EN 1008:2002
DIN ISO 10362-2:2015-12 Cigarettes - Determination of water in smoke condensates - Part 2: Karl Fischer method (ISO 10362-2:2013) / Note: To be amended by DIN ISO 10362-2/A1 (2021-02).
DIN 1186-100:2022-10 Interlocking concrete revetments in hydraulic engineering - Part 100: Evaluation of conformity of interlocking revetments in hydraulic engineering in addition to DIN 1186-1 / Note: Date of issue 2022-09-09
DIN 50018:2013 Testing in a saturated atmosphere in the presence of sulfur dioxide
DIN ISO 10362-2:2015 Cigarettes - Determination of water in smoke condensates - Part 2: Karl Fischer method (ISO 10362-2:2013)
DIN EN 14845-2:2006-11 Test methods for fibres in concrete - Part 2: Effect on concrete; German version EN 14845-2:2006
DIN EN 14845-1:2007-09 Test methods for fibres in concrete - Part 1: Reference concretes; German version EN 14845-1:2007
DIN EN 13880-12:2003 Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods); German version EN 13880-12:2003
DIN EN ISO 6270-2:2005 Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (ISO 6270-2:2005); German version EN ISO 6270-2:2005
DIN 55672-3 Berichtigung 1:2009 Gel permeation chromatography (GPC) - Part 3: Water as elution solvent, Corrigendum to DIN 55672-3:2007-08
DIN ISO 10362-1:2013 Cigarettes - Determination of water in smoke condensates - Part 1: Gas-chromatographic method (ISO 10362-1:1999 + Amd.1:2011)
DIN EN ISO 18562-4:2020-05 Biocompatibility evaluation of breathing gas pathways in healthcare application - Part 4: Tests for leachables in condensate (ISO 18562-4:2017); German version EN ISO 18562-4:2020 / Note: To be replaced by DIN EN ISO 18562-4 (2022-12).
DIN EN ISO 10426-6:2008 Petroleum and natural gas industries - Cements and materials for well cementing - Part 6: Methods for determining the static gel strength of cement formulations (ISO 10426-6:2008); English version EN ISO 10426-6:2008
DIN EN 13877-3:2005 Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements; German version EN 13877-3:2004
DIN EN 14649:2005 Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST); German version EN 14649:2005
DIN EN 14649:2005-07 Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST); German version EN 14649:2005
DIN EN 13577:2007 Chemical attack on concrete - Determination of aggressive carbon dioxide content in water; German version EN 13577:2007
DIN EN 13577:2007-07 Chemical attack on concrete - Determination of aggressive carbon dioxide content in water; German version EN 13577:2007
DIN EN ISO 18562-4:2022-12 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 4: Tests for leachables in condensate (ISO/DIS 18562-4:2022); German and English version prEN ISO 18562-4:2022 / Note: Date of issue 2022-11-18*Intended as replacem...

PL-PKN, moisture in the gel

PN BN 7453-01-1964 The using of glue for book-binding
PN A99007-06-1987 Cigarettes Chemical studies on cigarette smoke Determination of water in crude condensate of cigarette smoke
PN B10280-1969 Painting works by water paints and aqucous emulsion paints in buildinge

ES-UNE, moisture in the gel

UNE-EN ISO 13885-3:2022 Gel permeation chromatography (GPC) - Part 3: Water as eluent (ISO 13885-3:2020)
UNE-ISO 10362-1:2010/Amd 1:2016 Cigarettes -- Determination of water in smoke condensates -- Part 1: Gas-chromatographic method.
UNE-ISO 10362-2:2018 Cigarettes. Det of water in smoke condensates -- Part 2: Karl Fischer method
UNE-EN ISO 10426-6:2008 Petroleum and natural gas industries - Cements and materials for well cementing - Part 6: Methods for determining the static gel strength of cement formulations (ISO 10426-6:2008) (Endorsed by AENOR in August of 2008.)
UNE-EN ISO 18562-4:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 4: Tests for leachables in condensate (ISO 18562-4:2017) (Endorsed by Asociación Española de Normalización in April of 2020.)

未注明发布机构, moisture in the gel

BS ISO 13885-3:2020 Gel permeation chromatography (GPC) Part 3 : Water as eluent
BS EN ISO 9339-2:1998 Optics and opticals — Contact lenses — Determination of thickness — Part 2 : Hydrogel contact lenses

国家市场监督管理总局、中国国家标准化管理委员会, moisture in the gel

GB/T 37498-2019 Rubber,raw natural—Determination of the gel content of technically specified rubber (TSR)

ESDU - Engineering Sciences Data Unit, moisture in the gel

ESDU 91023 A-1993 Condensation inside tubes: pressure drop in straight horizontal tubes.

AT-ON, moisture in the gel

ONORM B 3326-1999 Testing of concrete - Determination of the water content of aggregates for concrete and fresh concrete - Micro-wave-drying
OENORM EN ISO 13885-3:2021 Gel permeation chromatography (GPC) - Part 3: Water as eluent (ISO 13885-3:2020)
ONORM B 5014-2-2000 Sensory and chemical requirements and testing of materials in contact with drinking water - Part 2: Cementitious materials

Institute of Interconnecting and Packaging Electronic Circuits (IPC), moisture in the gel

IPC TM-650 5.1.440-1975 Analysis of Pre-Preg Materials for Gel Time

US-FCR, moisture in the gel

FCR COE CRD-C 143-62-1962 HANDBOOK FOR CONCRETE AND CEMENT SPECIFICATIONS FOR METERS FOR AUTOMATIC INDICATION OF MOISTURE IN FINE AGGREGATE
FCR COE CRD-C 515-81-1981 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF PREPARATION OF TEST SPECIMENS FROM RUBBER OR PLASTIC WATERSTOP
FCR COE CRD-C 213-92-1992 HANDBOOK FOR CONCRETE AND CEMENT TEST METHOD FOR THE PRESENCE OF SUGAR IN CEMENT, MORTAR, CONCRETE, OR AGGREGATES
FCR COE CRD-C 154-77-1977 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR DETERMINATION OF MOISTURE IN FINE AGGREGATE FOR CONCRETE BY MEANS OF A CALCIUM-CARBIDE GAS PRESSURE METER
FCR COE CRD-C 231-63-1963 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST FOR VOLUME CHANGES IN NEAT CEMENT BARS
FCR COE CEGS 02553-A-1998 HEAT DISTRIBUTION SYSTEMS IN CONCRETE TRENCHES
FCR UFGS-33 61 15-2006 HEAT DISTRIBUTION SYSTEMS IN CONCRETE TRENCHES
FCR COE REMR-CS-53 FINAL REPORT-1997 APPLICATIONS OF ROLLER-COMPACTED CONCRETE IN REHABILITATION AND REPLACEMENT OF HYDRAULIC STRUCTURES
FCR 40 CFR PART 278-2014 CRITERIA FOR THE MANAGEMENT OF GRANULAR MINE TAILINGS (CHAT) IN ASPHALT CONCRETE AND PORTLAND CEMENT CONCRETE IN TRANSPORTATION CONSTRUCTION PROJECTS FUNDED IN WHOLE OR IN PART BY FEDERAL FUNDS
FCR 40 CFR PART 278-2013 CRITERIA FOR THE MANAGEMENT OF GRANULAR MINE TAILINGS (CHAT) IN ASPHALT CONCRETE AND PORTLAND CEMENT CONCRETE IN TRANSPORTATION CONSTRUCTION PROJECTS FUNDED IN WHOLE OR IN PART BY FEDERAL FUNDS
FCR COE EM 1110-2-6051-2003 TIME-HISTORY DYNAMIC ANALYSIS OF CONCRETE HYDRAULIC STRUCTURES
FCR COE SL-96-2 FINAL REPORT-1996 METHODS OR PREPARING HORIZONTAL CONSTRUCTION JOINTS IN MASS CONCRETE
FCR COE ETN 84-6-1984 FACILITIES ENGINEERING ENERGY CONSERVATION APPLICATION OF CONDENSER HEAT RECOVERY TO DOMESTIC WATER HEATING
FCR COE CRD-C 49-74-1974 HANDBOOK FOR CONCRETE AND CEMENT SUPPLEMENTARY STANDARD METHODS OF MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY
FCR COE CRD-C 403-71-1971 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST FOR DETERMINATION OF SULFATE ION IN SOILS AND WATER
FCR COE CRD-C 112-69-1969 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST FOR SURFACE MOISTURE IN AGGREGATE BY WATER DISPLACEMENT

AASHTO - American Association of State Highway and Transportation Officials, moisture in the gel

MP 16-2007 Standard Specification for Reclaimed Concrete Aggregate for Use as Coarse Aggregate in Hydraulic Cement Concrete
T 188-2005 Standard Method of Test for Evaluation by Freezing and Thawing of Air-Entraining Additions to Hydraulic Cement
T 105-2013 Standard Method of Test for Chemical Analysis of Hydraulic Cement
T 105-2015 Standard Method of Test for Chemical Analysis of Hydraulic Cement
T 105-2008 Standard Method of Test for Chemical Analysis of Hydraulic Cement
T 105-2009 Standard Method of Test for Chemical Analysis of Hydraulic Cement
T 105-2012 Standard Method of Test for Chemical Analysis of Hydraulic Cement
T 105-2011 Standard Method of Test for Chemical Analysis of Hydraulic Cement
T 105-2014 Standard Method of Test for Chemical Analysis of Hydraulic Cement
T 105-2006 Standard Method of Test for Chemical Analysis of Hydraulic Cement
T 105-1991 Standard Method of Test for Chemical Analysis of Hydraulic Cement (ASTM C114-88e)
M 315M-2009 Standard Specification for Joints for Circular Concrete Sewer and Culvert Pipe@ Using Rubber Gaskets [Metric]

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, moisture in the gel

GB/T 20491-2017 Steel slag powder used for cement and concrete
GB/T 1596-2017 Fly ash used for cement and concrete
GB/T 33813-2017 Refining slag powder used for cement and concrete
GB/T 35164-2017 Limestone powder used for cement , mortar and concrete
GB/T 18046-2017 Ground granulated blast furnace slag used for cement，mortar and concrete

Professional Standard - Ferrous Metallurgy, moisture in the gel

YB/T 4230-2010 Lithium slag powder for cement and concrete
YB/T 4229-2010 Silico-manganese slag powder used in cement and concrete
YB/T 4405-2013 Technical specification for blast furnace water-quenched slag sand used in concrete

中国民用航空局, moisture in the gel

MH/T 6119-2018 Determination of viable aerobic microorganisms in fuel oil and water-containing fuel oil by thixotropic gel culture method

PT-IPQ, moisture in the gel

E 250-1971
E 206-1967
E 245-1971
E 247-1971
E 249-1971
E 246-1971
NP EN 1170-7-2000 Precast concrete products Test method for glass-fibre reinforced cement Part 7:Measurement of extremes of dimensional variations due to moisture content

Danish Standards Foundation, moisture in the gel

DS/ISO 10 362-1:1992 Cigarettes - Determination of water in smoke condensates - Part 1: Gas-chromatographic method
DS/EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in concrete industry, as mixing water for concrete
DS/ISO 10362-1/Amd. 1:2011 Cigarettes - Determination of water in smoke condensates - Part 1: Gas-chromatographic method
DS/ISO 10362-1:2000 Cigarettes - Determination of water in smoke condensates - Part 1: Gas-chromatographic method
DS-håndbog 134.2.3:2013 Concrete - Concrete testing - Part 2.3: Concrete in structures
DS/EN ISO 13885-3:2021 Gel permeation chromatography (GPC) – Part 3: Water as eluent (ISO 13885-3:2020)
DS/EN ISO 10426-6:2008 Petroleum and natural gas industries - Cements and materials for well cementing - Part 6: Methods for determining the static gel strength of cement formulations
DS 260:1978 Water analysis. Aluminium in water. Photometric method
DS 281:1975 Water analysis. Determination of phenol in water
DS/EN 14845-2:2006 Test methods for fibres in concrete - Part 2: Effect on concrete
DS/EN 14845-1:2007 Test methods for fibres in concrete - Part 1: Reference concretes
DS/EN 480-4:2005 Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete
DS/EN 13577:2007 Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
DS/EN 14649:2005 Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST)
DS 280:1976 Water analysis. Determination of sulphide in waste water

农业农村部, moisture in the gel

NY/T 1811-2018 Technical specifications for the preparation of natural raw rubber gel Technical specifications for rubber production

工业和信息化部, moisture in the gel

JC/T 2503-2018 Ferronickel slag powder used in cement and concrete
YB/T 4561-2016 Iron tailings powder for use in cement and concrete
HG/T 5375-2018 Determination of acrylamide content in water-based adhesives
JC/T 2473-2018 Polishing powder for ceramic tiles in cement and concrete
HG/T 2404-2020 Identification of rubber compounding agent precipitated hydrated silica in styrene-butadiene rubber

Lithuanian Standards Office , moisture in the gel

LST EN 1008-2003 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
LST 1428.13-1997 Concrete. Testing methods. Verification of cement strength in concrete
LST ISO 10362-2:1997 Cigarettes. Determination of water in smoke condensates. Part 2: Karl Fischer method (idt ISO 10362-2:1994)
LST ISO 10362-1:2003 Cigarettes. Determination of water in smoke condenstes. Part 1: Gas-chromatographic method (idt ISO 10362-1:1999)
LST EN 14845-2-2007 Test methods for fibres in concrete - Part 2: Effect on concrete
LST EN 14845-1-2007 Test methods for fibres in concrete - Part 1: Reference concretes
LST EN 480-4-2006 Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete
LST EN 12023-2000 Self-adhesive tapes - Measurement of water transmission in a warm humid atmosphere
LST EN 13577-2007 Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
LST ISO 10362-2:2014 Cigarettes - Determination of water in smoke condensates - Part 2: Karl Fischer method (ISO 10362-2:2013, identical)
LST EN 14649-2005 Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST)

BE-NBN, moisture in the gel

NBN-ISO 10362-1:1992 Cigarettes - Determination of water in smoke condensates - Part 1 : Gas-chromatographic method
NBN-EN 480-4-1991 Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding
NBN-ISO 10591:1992 Building construction - Sealants - Determination of adhesion/cohesion properties after immersion in water

Professional Standard - Building Materials, moisture in the gel

JC/T 668-1997 Test method for calcium sulfate in hydrated cement mortar
JC/T 668-2009 Method for determining residue water-extractable sulfate in cement mortar

VE-FONDONORMA, moisture in the gel

NORVEN 75-3-1966

Standard Association of Australia （SAA）, moisture in the gel

AS 3582.2:1991 Supplementary cementitious materials for use with portland cement - Slag - Ground granulated iron blast-furnace
AS 3582.3:1994 Supplementary cementitious materials for use with portland cement - Silica fume
AS 3582.2:2016 Supplementary cementitious materials for use with portland cement - Slag - Ground granulated iron blast-furnace
AS 1012.4.3:1999 Methods of testing concrete - Determination of air content of freshly mixed concrete - Measuring air volume when concrete dispersed in water
AS 3582.1:1998 Supplementary cementitious materials for use with portland and blended cement - Fly ash
AS 3582.1:1998/Amdt 1:1999
AS 1012.4.3:2014 Methods of testing concrete, Method 4.3: Determination of air content of freshly mixed concrete — Measuring air volume when concrete is dispersed in water
AS/NZS 3582.3:2002 Supplementary cementitious materials for use with portland and blended cement - Amorphous silica
AS 3583.2:1991 Methods of test for supplementary cementitious materials for use with portland cement - Determination of moisture content
AS 3583.6:1995 Methods of test for supplementary cementitious materials for use with portland cement - Determination of relative water requirement and relative strength
AS 1012.20:1992 Methods of testing concrete - Determination of chloride and sulfate in hardened concrete and concrete aggregates
AS 1012.21:1999(R2014)
AS 3583.11:1991 Methods of test for supplementary cementitious materials for use with portland cement - Determination of manganese content
AS 1012.20.2:2016 Methods of testing concrete, Method 20.2: Determination of water-soluble chloride in aggregates and hardened concrete
AS 3583.3:1991 Methods of test for supplementary cementitious materials for use with portland cement - Determination of loss on ignition
AS 3583.7:1991/Amdt 1:1993
AS 1012.21:1999 Methods of testing concrete - Determination of water absorption and apparent volume of permeable voids in hardened concrete
AS 3583.4:1991 Methods of test for supplementary cementitious materials for use with portland cement - Determination of autoclave expansion
AS 3583.5:1991 Methods of test for supplementary cementitious materials for use with portland cement - Determination of relative density
AS 3583.8:1991 Methods of test for supplementary cementitious materials for use with portland cement - Determination of sulfuric anhydride content
AS 3583.9:1991 Methods of test for supplementary cementitious materials for use with portland cement - Determination of magnesia content
AS 3583.12:1991 Methods of test for supplementary cementitious materials for use with portland cement - Determination of available alkali
AS 3583.13:1991 Methods of test for supplementary cementitious materials for use with portland cement - Determination of chloride ion content

American Concrete Institute, moisture in the gel

ACI 212.4R-2004 Guide for the Use of High-Range Water-Reducing Admixtures (Superplasticizers) in Concrete
ACI 355.4-2010 Acceptance Criteria for Qualification of Post-Installed Adhesive Anchors in Concrete (ACI 355.4-10) and Commentary
ACI 211.4R-2008 Guide for Selecting Proportions for High-Strength Concrete Using Portland Cement and Other Cementitious Materials

Professional Standard - Agriculture, moisture in the gel

NY/T 2016-2011 Determination of pectin content in fruit and derived product.Spectrophotometry method
KJ 202204 Colloidal gold immunochromatographic method for rapid detection of isocarbophos in fruits and vegetables
NY/T 1663-2008 Determination of β-lactoglobulin content in milk and dairy products SDS-PAGE electrophoresis

Indonesia Standards, moisture in the gel

SNI 03-4429-1997 Test method for rubber sponge as expansion joint filler for concrete construction

US-COE, moisture in the gel

COE CRD-C 213-92-1992 HANDBOOK FOR CONCRETE AND CEMENT TEST METHOD FOR THE PRESENCE OF SUGAR IN CEMENT, MORTAR, CONCRETE, OR AGGREGATES

The American Road & Transportation Builders Association, moisture in the gel

AASHTO MP 16-2010 Standard Specification for Reclaimed Concrete Aggregate for Use as Coarse Aggregate in Hydraulic Cement Concrete Revision 1
AASHTO T 188-2005(R2009) Standard Method of Test for Evaluation by Freezing and Thawing of Air-Entraining Additions to Hydraulic Cement
AASHTO T 105-2011 Standard Method of Test for Chemical Analysis of Hydraulic Cement
AASHTO T 105-2013 Standard Method of Test for Chemical Analysis of Hydraulic Cement
AASHTO T 105-2014 Standard Method of Test for Chemical Analysis of Hydraulic Cement
AASHTO T 105-2016 Standard Method of Test for Chemical Analysis of Hydraulic Cement
AASHTO T 105-2021 Standard Method of Test for Chemical Analysis of Hydraulic Cement
AASHTO M 315M-2007 Standard Specification for Joints for Circular Concrete sewer and culvert pipe, Using Rubber Gaskets [Metric]

Professional Standard - Chemical Industry, moisture in the gel

HG/T 4744-2014 Determination of average molecular weight and molecular weight distribution of photographic gelatin by GFC
HG/T 2404-2008 Rubber compounding ingredients.Silica,precipitated,hydrated.Evaluation procedures in styrene-butadiene rubber

ZA-SANS, moisture in the gel

SANS 51008:2006 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
SANS 50681-1:1996 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., moisture in the gel

ASHRAE 4682-2004 Heat Transfer Augmentation by Segmented Tape Inserts During Condensation of R-22 Inside a Horizontal Tube
ASHRAE LO-09-057-2009 Dynalene/Water Correlations to Be Used for Condensation of CO2 in Brazed Plate Heat Exchangers

CH-SNV, moisture in the gel

SN EN ISO 13885-3:2021 Gel permeation chromatography (GPC) - Part 3: Water as eluent (ISO 13885-3:2020)

IN-BIS, moisture in the gel

Malaysia Standards, moisture in the gel

MS 281 Pt.6-1998
MS 1457-1999 Guidelines for the application of liquid polyaluminium-based coagulants in potable water treatment

BR-ABNT, moisture in the gel

ABNT NBR ISO 12466-2:2012 Plywood - Quality of glue Part 2: Requirements
ABNT NBR 9484-2011 Plywood - Determination of moisture content

NL-NEN, moisture in the gel

NEN 3804-1969 Gelatine. Determination of moisture content
NEN 5934-1990 Aggregates for concrete - Determination of total moisture content

Japanese Industrial Standards Committee (JISC), moisture in the gel

JIS A 1144:2001 Methods of test for chloride concentration in water of fresh concrete
JIS A 1144:2010 Method of test for chloride concentration in water of fresh concrete
JIS K 3838:1995 General rules for SDS-polyacrylamide gel electrophoresis analysis

Fujian Provincial Standard of the People's Republic of China, moisture in the gel

DB35/T 1467-2014 Lead-zinc-iron tailings fine powder used in cement and concrete

VN-TCVN, moisture in the gel

TCVN 6936-1-2001 Cigarettes.Determination of water in smoke condensates.Part 1: Gas-chromatographic method
TCVN 6936-2-2001 Cigarettes.Determination of water in smoke condensates.Part 2: Karl Fischer method

API - American Petroleum Institute, moisture in the gel

API MPMS TR 2570-2010 Continuous On-line Measurement of Water Content in Petroleum (Crude Oil and Condensate) (First Edition)

KR-KS, moisture in the gel

KS M ISO 11344-2017 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
KS M ISO 5794-2-2017 Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2:Evaluation procedures in styrene-butadiene rubber

GOSTR, moisture in the gel

GOST 8756.12-1991 Fruit and vegetable products. Methods for determination of jelling power and paste-forming capacity of fruit puree

YU-JUS, moisture in the gel

JUS U.M1.063-1993 Concrete - Determination of the homogencity of cement and water in the fresh concrete mixture by radioisotopes method

Hebei Provincial Standard of the People's Republic of China, moisture in the gel

DB13/T 5263-2020 Technical Requirements for SAm Grade Cement Concrete Movable Guardrails in Central Divider

BELST, moisture in the gel

STB 1937-2015 Bituminous and polymeric tape for asphalt and cement concrete road pavement. Specifications

Jiangxi Provincial Standard of the People's Republic of China, moisture in the gel

DB36/T 1778-2023 Technical specification for application of lepidolite slag in cement and concrete

SE-SIS, moisture in the gel

SIS SS 13 21 22-1983 Concrete testing - Aggregate - Moisture content by dryingat 105 °C
SIS SS 13 73 06-1982 Autoclaved aerated concrete - Determination of moisture content

GB-REG, moisture in the gel

REG 40 CFR PART 278-2011 CRITERIA FOR THE MANAGEMENT OF GRANULAR MINE TAILINGS (CHAT) IN ASPHALT CONCRETE AND PORTLAND CEMENT CONCRETE IN TRANSPORTATION CONSTRUCTION PROJECTS FUNDED IN WHOLE OR IN PART BY FEDERAL FUNDS

Taiwan Provincial Standard of the People's Republic of China, moisture in the gel

CNS 14376-1999 Method of test for cigarettes -Determination of water in smoke condensates (gas - chromatographic method)

Professional Standard - Textile, moisture in the gel

FZ/T 50010.2-1998 Pulp board for viscose fiber.Determination of moisture content

CZ-CSN, moisture in the gel

CSN 67 3094 Z1-1998
CSN 83 0540 Cast.30-1987 Chemical and physical analysis of waste waters. Determination of grease and oils

Military Standard of the People's Republic of China-General Armament Department, moisture in the gel

GJB 465.4-1991 Test method for resistance of vulcanized rubber to anhydrous hydrazine Determination of the amount of non-volatile residue in anhydrous hydrazine after soaking vulcanized rubber

中华人民共和国环境保护部, moisture in the gel

GB 12375-1990 Analytical method of tritium in water
GB 11224-1989 Analytical determination of radium-226 in water
GB 11225-1989 Analytical method of plutonium in water

Professional Standard - Environmental Protection, moisture in the gel

HJ 1126-2020 Analysis method of tritium in water

National Association of Corrosion Engineers (NACE), moisture in the gel

NACE SP0408-2014 Cathodic Protection of Reinforcing Steel in Buried or Submerged Concrete Structures (Item No. 21133)

Professional Standard - Construction Industry, moisture in the gel

JGJ 54-1979 Technical specification for water-reducer admixtures of calcium lignosulphonate using in concrete

United States Navy, moisture in the gel

NAVY SS-S-1614 A (1)-1993 SEALANTS, JOINT, JET-FUEL-RESISTANT, HOT-APPLIED, FOR PORTLAND CEMENT AND TAR CONCRETE PAVEMENTS
NAVY SS-S-1614 A VALID NOTICE 1-1988 SEALANTS, JOINT, JET-FUEL-RESISTANT, HOT-APPLIED, FOR PORTLAND CEMENT AND TAR CONCRETE PAVEMENTS
NAVY SS-S-1614 A-1984 SEALANTS, JOINT, JET-FUEL-RESISTANT, HOT-APPLIED, FOR PORTLAND CEMENT AND TAR CONCRETE PAVEMENTS