ZH
RU
ES

Emission test cycle

Emission test cycle, Total:274 items.

In the international standard classification, Emission test cycle involves: Air quality, Internal combustion engines, Energy and heat transfer engineering in general, Motor cycles and mopeds, Iron and steel products, Environmental protection, Road vehicle systems, Fibre optic communications, Pipeline components and pipelines, Vocabularies, Road vehicles in general, Acoustics and acoustic measurements, Quality, Electrical engineering in general, Test conditions and procedures in general, Coatings and related processes used in aerospace industry, Plastics, Environmental testing, Medical equipment, Radiation protection, Rubber, Welding, brazing and soldering, Transport, Electrical and electronic testing, Fluid storage devices, Heat recovery. Thermal insulation, Leather technology, Electrical accessories, Fasteners, Structures of buildings, Shipbuilding and marine structures in general, Small craft, Testing of metals, Microbiology, Sports equipment and facilities, Electromechanical components for electronic and telecommunications equipment, Corrosion of metals, Non-destructive testing, Coals, Railway rolling stock, Mechanical testing, Adhesives, Elements of buildings, Mining and quarrying, Construction materials, Machine tools, Protection against dangerous goods, Domestic, commercial and industrial heating appliances, Internal combustion engines for road vehicles, Wastes, Aerospace electric equipment and systems, Equipment for petroleum and natural gas industries, Diagnostic, maintenance and test equipment, Wood-based panels, Valves, External sewage systems, Electronic component assemblies, Geology. Meteorology. Hydrology, Industrial trucks, Nuclear energy engineering, Analytical chemistry, Freight distribution of goods, Petroleum, petroleum products and natural gas handling equipment.

RU-GOST R, Emission test cycle

GOST ISO 8178-10-2014 Reciprocating internal combustion engines. Exhaust emission measurement. Part 10. Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
GOST ISO 8178-9-2014 Reciprocating internal combustion engines. Exhaust emission measurement. Part 9. Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
GOST 28216-1989 Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
GOST ISO 11640-2014 Leather. Tests for colour fastness to cycles of to-and-fro rubbing
GOST 23.205-1979 Products wear resistance assurance. Accelerated life tests by inguiry method
GOST 28234-1989 Basic environmental testing procedures. Part 2. Tests. Test Kb: Salt mist, cyclic (sodium chloride solution)
GOST ISO 8178-1-2013 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1. Test-bed measurement of gaseous and particulate exhaust emissions
GOST 28224-1989 Basic environmental testing procedures. Part 2. Test Z/AD. Composite temperature and humidity cyclic test
GOST ISO 8178-11-2015 Reciprocating internal combustion engines. Exhaust emission measurement. Part 11. Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
GOST 33972.5-2016 Test code for machine tools. Part 5. Determination of the noise emission

Association Francaise de Normalisation, Emission test cycle

NF E37-211-10:2003 Reciprocating internal combustion engines - Exhaust emission measurement - Part 10 : test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions.
NF E37-211-4:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4 : steady-state test cycles for different engine applications.
NF E37-211-4:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 4 : test cycles for different engine applications.
NF E37-211-9:2012 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
NF EN 17800:2022 Coût du cycle de vie (CCV) et analyse du cycle de vie (ACV) pour les émissions de CO2 dans les systèmes de canalisations en fonte ductile
NF T51-181:1986 Plastics. Cyclical exposure. Exposure test cycles.
NF S31-009-3*NF EN 61672-3:2014 Electroacoustics - Sound level meters - Part 3 : periodic tests
NF S52-709:1994 Alpine skis. Determination of fatigue indexes. Cyclic loading test.
NF P75-487*NF ISO 21901:2021 Thermal insulation - Test method for thermal diffusivity - Periodic heat method
NF A05-502-1*NF EN ISO 11782-1:2008 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1 : cycles to failure testing.
NF G52-350:2013 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing
NF B10-642*NF EN 16306:2013 Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles
NF S52-727:1994 Cross-country skis. Determination of fatigue indexes. Cyclic loading test.
NF E29-789:2002 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders.
NF C93-400-9-5*NF EN 60512-9-5:2011 Connectors for electronic equipment - Tests and measurements - Part 9-5 : endurance tests - Test 9e : current loading, cyclic
NF E29-785*NF EN 1968:2002 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders.
NF E29-784*NF EN 14876:2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
NF E29-785/A1*NF EN 1968/A1:2006 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders
NF E29-786:2002 Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders.
NF J95-067*NF EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measutrement - Test-bed measurement of gaseous and particulate exhaust emissions
NF S31-069*NF ISO 230-5:2003 Test code for machine tools - Part 5 : determination of the noise emission.
NF P16-126*NF EN 12889:2000 Trenchless construction and testing of drains and sewers
NF E29-787:2002 Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders.
NF E37-211-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF E37-211-1:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF ISO 8178-1:2020 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 1 : mesurage des émissions de gaz et de particules au banc d'essai
NF H90-050-3:2006 Offshore containers and associated lifting sets - Part 3 : periodic inspection, examination and testing.

International Organization for Standardization (ISO), Emission test cycle

ISO 8178-4:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications
ISO 8178-9:2000 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
ISO 8178-9:2000/Amd 1:2004 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions; Amendment 1
ISO 8178-9:2012 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
ISO 8178-4:2007 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications
ISO 8178-10:2002 Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurements of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
ISO 8178-4:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state and transient test cycles for different engine applications
ISO 6406:2005 Gas cylinders - Seamless steel gas cylinders - Periodic inspection and testing
ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
ISO 7798:1984 Cross-country skis; Determination of fatigue indexes; Cyclic loading test
ISO 21901:2021 Thermal insulation - Test method for thermal diffusivity - Periodic heat method
ISO 7798:2017 Cross-country skis - Determination of fatigue indexes - Cyclic loading test
ISO 21581:2010 Timber structures - Static and cyclic lateral load test methods for shear walls
ISO 11640:1993 Leather; tests for colour fastness; colour fastness to cycles of to-and-fro rubbing
ISO 11640:2018 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing
ISO 11640:2012 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing
ISO 8178-1:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
ISO 6961:1982 Long-term leach testing of solidified radioactive waste forms
ISO 8178-1:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO 10464:2004 Gas cylinders - Refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic inspection and testing

British Standards Institution (BSI), Emission test cycle

BS ISO 8178-9:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transi ent conditions
BS ISO 8178-9:2012 Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS ISO 8178-10:2003 Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS ISO 8178-4:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Steady-state and transient test cycles for different engine applications
BS EN 17800:2022 Life cycle cost (LCC) and life cycle assessment (LCA) for CO2 emissions in ductile iron pipe systems
PAS 2050:2011 Specification for the assessment of the life cycle greenhouse gas emissions of goods and services
PAS 2395:2014 Specification for the assessment of greenhouse gas (GHG) emissions from the whole life cycle of textile products
BS PAS 2050:2011 Specification for the assessment of the life cycle greenhouse gas emissions of goods and services
BS PAS 2050:2008 Specification for the assessment of the life cycle greenhouse gas emissions of goods and services
BS EN 61672-3:2007 Electroacoustics - Sound level meters - Periodic tests
BS EN 61672-3:2013 Electroacoustics. Sound level meters. Periodic tests
BS PAS 2395:2014 Specification for the assessment of greenhouse gas (GHG) emissions from the whole life cycle of textile products
PD 6574:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
BS EN 61672-3:2006 Electroacoustics - Sound level meters - Part 3: Periodic tests
BS EN 60068-2-52:1996 Environmental testing - Test methods - Tests - Test Kb - Salt mist cyclic (sodium chloride solution)
BS ISO 21901:2021 Thermal insulation. Test method for thermal diffusivity. Periodic heat method
BS EN 12512:2001 Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners
BS EN 12512:2002 Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners
BS EN ISO 18854:2015 Small craft. Reciprocating internal combustion engines exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions
BS EN 60512-9-5:2010 Connectors for electronic equipment - Tests and measurements - Endurance tests - Test 9e - Current loading, cyclic
BS EN 1593:1999 Non-destructive testing - Leak testing - Bubble emission techniques
PAS 2050-2:2012 Assessment of life cycle greenhouse gas emissions. Supplementary requirements for the application of PAS 2050:2011 to seafood and other aquatic food products
BS EN ISO 11640:1998 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing
BS EN ISO 11623:2002 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders
BS EN 16306:2013 Natural stone test methods. Determination of resistance of marble to thermal and moisture cycles
BS EN ISO 11640:2012 Leather. Tests for colour fastness. Colour fastness to cycles of to-and-fro rubbing
BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
BS DD CEN/TS 15883:2009 Residential solid fuel burning appliances - Emission test methods
BS ISO 8178-1:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Test-bed measurement systems of gaseous and particulate emissions
BS EN 1968:2002 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders
BS EN 4057-402:2007 Aerospace series. Cable ties for harnesses. Test methods. Life cycle
BS EN 4057-402:2014 Aerospace series. Cable ties for harnesses. Test methods. Life cycle
BS ISO 8178-5:2015 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-5:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Test fuels
BS EN 295-3:2012 Vitrified clay pipe systems for drains and sewers. Test methods
BS EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Cyclic bending test
BS EN ISO 15848-2:2006 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Production acceptance test of valves
BS ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
BS EN 1803:2002 Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders
BS EN 1802:2002 Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders
BS EN 12053:2001+A1:2008 Safety of industrial trucks — Test methods for measuring noise emissions

Group Standards of the People's Republic of China, Emission test cycle

T/CSTE 0445-2023 Carbon emission accounting standard for the whole life cycle of power battery
T/CSAE 91-2018 Life cycle assessment methods for greenhouse gases and air pollutants emissions of the automobile
T/CAEE 001-2023 Carbon emission assessment methods and requirements for the entire life cycle of room air conditioners
T/CSTM 00403-2021 Corrosion test method of tubing and casing string used in full-life-cycle service environment of acidizing operation well

German Institute for Standardization, Emission test cycle

DIN EN 17800:2023 Life cycle cost (LCC) and life cycle assessment (LCA) for CO emissions in ductile iron pipe systems
DIN EN ISO 8178-4:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications (ISO 8178-4:1996); German version EN ISO 8178-4:1996
DIN EN 17800:2023-03 Life cycle cost (LCC) and life cycle assessment (LCA) for CO<(Index)2> emissions in ductile iron pipe systems; German version EN 17800:2022 / Note: This standard is part of the DVGW body of rules.
DIN 81208-5:2005 Manoeuvring of ships - Part 5: Turning circle test/trial
DIN ISO 7798:1985 Cross-country skis; determination of fatigue indexes; cyclic loading test
DIN EN 1968:2005 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders; English version of DIN EN 1968:2002 + A1:2005
DIN EN ISO 11782-1:2008 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing (ISO 11782-1:1998); German version EN ISO 11782-1:2008
DIN EN 14876:2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums; English version of DIN EN 14876:2007-04
DIN ISO 7798:2018 Cross-country skis - Determination of fatigue indexes - Cyclic loading test (ISO 7798:2017)
DIN EN ISO 18854:2015-08 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015); German version EN ISO 18854:2015
DIN 25466:1995 Fume hoods for radioactive materials - Rules for construction and tests

VN-TCVN, Emission test cycle

TCVN 6440-2-2009 Motorcycles.Measurement method for gaseous exhaust emissions and fuel consumption.Part 2: Test cycles and specific test conditions
TCVN 6852-1-2008 Reciprocating internal combustion engines.Exhaust emission measurement.Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
TCVN 7011-5-2007 Test code for machine tools.Part 5: Determination of the noise emission

Japanese Industrial Standards Committee (JISC), Emission test cycle

JIS D 1047-2:2017 Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 2: Test cycles and specific test conditions
JIS B 8008-4:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Steady-state test cycles for different engine applications
JIS B 8008-4:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Test cycles for different engine applications
JIS B 8008-10:2006 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
JIS C 5024:1978 Damp heat (cyclic) testing procedures for electronic components
JIS C 0024:2000 Environmental testing -- Part 2: Tests -- Test Kb: Salt mist, cyclic (sodium, chloride solution)
JIS B 7283:1997 Method of endurance test under cyclic load for spectacle frame
JIS C 5032:1975 Sealing (immersion cyclic) testing method for electronic components
JIS Z 2283:1998 Method of low cycle fatigue testing for metallic materials in liquid helium
JIS C 0027:1988 Basic environmental testing procedures Part 2: Tests Test Db: Damp heat, cyclic (12 + 12-Hour cycle)
JIS A 1490:2022 Thermal insulation -- Test method for thermal diffusivity -- Periodic heat method
JIS B 6195:2003 Test code for machine tools -- Determination of the noise emission
JIS D 1026:1987 Measurement of noise emitted by stationary road vehicles
JIS C 60068-2-30:2011 Environmental testing -- Part 2-30: Tests -- Test Db: Damp heat, cyclic (12 h + 12 h cycle)
JIS B 8008-1:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate emissions
JIS B 8008-1:2023 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement systems of gaseous and particulate emissions
JIS B 8008-1:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions

Korean Agency for Technology and Standards (KATS), Emission test cycle

KS R ISO 8178-9:2007 Reciprocating internal combustion engines－Exhaust emission measurement－Part 9：Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
KS R ISO 8178-4:2007 Reciprocating internal combustion engines－Exhaust emission measurement－Part 4：Test cycles for different engine applications
KS R ISO 8178-10:2009 Reciprocating internal combustion engines－Exhaust emission measurement－Part 10：Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
KS R ISO 8178-9:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition eng
KS G ISO 7798:2004 Cross-country skis－Determination of fatigue indexes－Cyclic loading test
KS B 0838-2006 Methods of radiographic test for circumferentialbutt welds of aluminium pipes and tubes
KS D ISO 11782-1:2003 Corrosion of metals and alloys－Corrosion fatigue testing－Part 1：Cycles to failure testing
KS D ISO 11782-1:2017 Corrosion of metals and alloys－Corrosion fatigue testing－Part 1：Cycles to failure testing
KS G ISO 6266:2009 Alpine skis-Determination of fatigue indexes-Cyclic loading test
KS M ISO 11640:2006 Leather-Tests for colour fastness-Colour fastness to cycles of to-and-fro rubbing
KS G ISO 6266:2014 Alpine skis－Determination of fatigue indexes－Cyclic loading test
KS I ISO 16000-9-2014(2019) Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method
KS R 1062-2013 Test code of exhaust emission control devices for atuomobiles
KS R 1062-2005(2010) Test code of exhaust emission control devices for atuomobiles
KS R ISO 8178-5:2018 Reciprocating internal combustion engines－Exhaust emission measurement－Part 5：Test fuels
KS R ISO 8725-2008(2013) Road vehicles－Transient open-loop response test method with one period of sinusoidal input
KS B ISO 8178-11-2008(2018) Reciprocating internal combustion engines－Exhaust emission measurement－Part 11：Test bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under tra
KS B ISO 10464:2005 Gas cylinders-Refillable welded steel cylinders for liquefied petroleum gas(LPG)-Periodic inspection and testing

European Committee for Standardization (CEN), Emission test cycle

EN 17800:2022 Life cycle cost (LCC) and life cycle assessment (LCA) for CO2 emissions in ductile iron pipe systems
EN 1055:1996 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
EN ISO 8178-4:1996 Reciprocating Internal Combustion Engines - Exhaust Emission Measurement Part 4: Test Cycles for Different Engine Applications ISO 8178-4: 1996
EN ISO 11640:2012 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012)
EN 14876:2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
DD ENV 13419-1-1999 Building Products - Determination of the Emission of Volatile Organic Compounds - Part 1: Emission Test Chamber Method
EN ISO 11623:2002 Transportable Gas Cylinders - Periodic Inspection and Testing of Composite Gas Cylinders ISO 11623: 2002
EN ISO 11640:1998 Leather - Tests for Colour Fastness - Colour Fastness to Cycles of to-and-fro Rubbing ISO 11640:1993
EN 1802:2002 Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders
EN 1803:2002 Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders
EN ISO 13260:2011 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010)

(U.S.) Ford Automotive Standards, Emission test cycle

FORD FLTM BQ 104-07-2000 ENVIRONMENTAL TEST CYCLES

Society of Automotive Engineers (SAE), Emission test cycle

SAE J2766-2009 Life Cycle Analysis to Estimate the CO<(Index)2>-Equivalent Emissions from MAC Operation
SAE ARP4992A-2004 Periodic Test Plan for Processing Solutions
SAE ARP4992B-2012 Periodic Test Plan for Processing Solutions
SAE J1597-2008 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability

SAE - SAE International, Emission test cycle

SAE J2766-2019 Life Cycle Analysis to Estimate the CO2-Equivalent Emissions from MAC Operation
SAE J1597-1988 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure Cycle Durability
SAE J1597-2016 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
SAE J1597-2021 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure Cycle Durability

American National Standards Institute （ANSI), Emission test cycle

ANSI/EIA/TIA 455-104A:1993 Fiber Optic Cable Cyclic Flexing Test
ANSI N449.1-1978 Procedures for periodic inspection of cobalt-60 and cesium-137 teletherapy equipment
ANSI/EIA/CEA 364-32D:2006 Thermal Shock (Temperature Cycling) Test Procedure for Electrical Connectors

Professional Standard - Environmental Protection, Emission test cycle

HJ 1237-2021 Specifications for Periodic Inspection of Motor Vehicle Emissions
HJ 1238-2021 Technical specifications for collection and transmission of vehicle emission periodic inspection information

Professional Standard - Aviation, Emission test cycle

HB 5194-1981 Test method for cyclic immersion corrosion
HB 5207-1982 High temperature cycle durability test method for metals

GM Europe, Emission test cycle

GME 01107 V-2007 Front Seat Structure Lifecycle Durability; Verification Part

BE-NBN, Emission test cycle

NBN C 06-230-1977

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Emission test cycle

GB 5080.2 86 Equipment reliability testing Guidance for the design of test cycles
GB/T 5080.2-1986 Equipment reliability testing--Guidance for the design of test cycles
GB 5080.2-1986 Equipment reliability testing Guidance for the design of test cycles
GB/T 5080.2-2012 Reliability testing.Part 2:Design of test cycles
GB/T 3785.3-2018 Electroacoustics.Sound level meters.Part 3:Periodic tests
GB/T 19046-2003 Medical electron accelerators acceptance and periodic tests
GB/T 19046-2013 Procedures for Acceptance Test and Periodic Inspection of Medical Electron Accelerator
GB 15579.4-2014 Arc welding equipment.Part 4:Periodic inspection and testing
GB/T 15579.4-2014 Arc welding equipment.Part 4:Periodic inspection and testing
GB/T 14625.5-2008 Test methods for basketball,football,volleyball and handball- Part 5:Measurement of circumference and its variation
GB/T 24517-2009 Corrosion of metals and alloys.Outdoors exposure test methods for periodic water spray
GB/T 7023-1986 Long-term leach testing of solidified radioactive waste forms
GB/T 8190.1-1999 Reciprocating internal combustion engines--Exhaust emission measurement--Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
GB/T 8190.1-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 1:Test-bed measurement of gaseous and particulate exhaust emissions
GB/T 8190.1-2023 Emission measurement of reciprocating internal combustion engines - Part 1: Test bench measurement systems for gaseous and particulate emissions

US-CFR-file, Emission test cycle

CFR 40-86.1360-2014 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.1360:Supplemental emission test; test cycle and procedures.
CFR 40-61.13-2014 Protection of Environment. Part61:National emission standards for hazardous air pollutants. Section61.13:Emission tests and waiver of emission tests.
CFR 40-86.1333-2014 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.1333:Transient test cycle generation.
CFR 40-86.1362-2014 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.1362:Steady-state testing with a ramped-modal cycle.

KR-KS, Emission test cycle

KS R ISO 8178-9-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition eng
KS R ISO 8178-5-2018 Reciprocating internal combustion engines－Exhaust emission measurement－Part 5：Test fuels
KS B ISO 7842-2018(2023) Automatic steam traps — Determination of discharge capacity — Test methods
KS B ISO 230-5-2018(2023) Test code for machine tools — Part 5:Determination of the noise emission

未注明发布机构, Emission test cycle

SAE ARP4992B-2019 Periodic Test Plan for Processing Solutions
BS PAS 2050-2:2012 SPECIFICATION Assessment of life cycle greenhouse gas emissions Supplementary requirements for the application of PAS 2050 : 2011 to seafood and other aquatic food products
DIN EN ISO 8178-1:1996 Reciprocating internal combustion engines, Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions

AENOR, Emission test cycle

UNE-CR 1404:2001 DETERMINATION OF EMISSIONS FROM APPLIANCES BURNING GASEOUS FUELS DURING TYPE-TESTING.

(U.S.) Telecommunications Industries Association , Emission test cycle

TIA-455-104-A-1993 FOTP-104 Fiber Optic Cable Cyclic Flexing Test

International Electrotechnical Commission (IEC), Emission test cycle

IEC 60605-2:1994 Equipment reliability testing - Part 2: Design of test cycles
IEC 61672-3:2006 Electroacoustics - Sound level meters - Part 3: Periodic tests
IEC 61672-3:2013 Electroacoustics - Sound level meters - Part 3: Periodic tests
IEC 60512-9-5:2010 Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

American Society for Testing and Materials (ASTM), Emission test cycle

ASTM D4482-99 Standard Test Method for Rubber Property-Extension Cycling Fatigue
ASTM D4482-06 Standard Test Method for Rubber Property-Extension Cycling Fatigue
ASTM D4482-11 Test Method for Rubber PropertyExtension Cycling Fatigue
ASTM D4482-07 Standard Test Method for Rubber Property-Extension Cycling Fatigue
ASTM E1193-20 Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests
ASTM D6899-03 Standard Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel
ASTM E1193-97(2012) Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests
ASTM D1183-03 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D1183-03(2011) Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM E2126-07 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
ASTM E1191-03 Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM E1191-03a Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM E1942-98(2004) Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM E1193-97 Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests
ASTM E1193-97(2004) Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests
ASTM E1191-03a(2023) Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM E1191-03A(2023)e1 Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM E1191-03a(2014) Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM E1191-97 Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM D2143-00 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D2143-94 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D2143-00(2005)e1 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D2143-00(2010) Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D2143-21 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D2143-15 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D7036-12 Standard Practice for Competence of Air Emission Testing Bodies
ASTM D3434-00(2013) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM F1800-97 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM F1800-04 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM F1800-97(2003) Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM F1800-19e1 Standard test method for cyclic fatigue testing of medical tibial disc components of total knee replacements
ASTM D3434-00 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D3434-00(2006) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives

HU-MSZT, Emission test cycle

MSZ 21 870/4-1978

Danish Standards Foundation, Emission test cycle

DS/ISO 21901:2021 Thermal insulation – Test method for thermal diffusivity – Periodic heat method

Professional Standard - Railway, Emission test cycle

TB/T 2375-1993 Test method for periodic infiltration corrosion of weathering steel for railway
TB/T 2783-2006 Exhaust emission tests for railway diesel traction engines
TB/T 2783-2017 Exhaust emission tests for diesel engines of motive power units

TH-TISI, Emission test cycle

TIS 2560-2011 Exhaust emissions from motor vehicles:test method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Emission test cycle

GB/T 33302-2016 The test method of the emission of sulfur during coal combustion

GM Global, Emission test cycle

GMW 16853-2013 Comprehensive Standard for Overall Emission Testing of Interior Materials and Parts (Fogging, Odor, Emissions, Carbonyls, Amines) Issue 2; English

CEN - European Committee for Standardization, Emission test cycle

EN ISO 11640:2018 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing

Taiwan Provincial Standard of the People's Republic of China, Emission test cycle

CNS 13001-1992 Method of Radiographic Testing for Circumferential Butt Welds of Aluminum Pipes and Tubes

国家市场监督管理总局、中国国家标准化管理委员会, Emission test cycle

GB/T 38340-2019 Small craft—Reciprocating internal combustion engines exhaust emission measurement—Test-bed measurement of gaseous and particulate exhaust emissions
GB/T 39221-2020 Determination for performance of scale inhibitors for reverse osmosis seawater desalination—Recurrent condensation cycle test method

ES-AENOR, Emission test cycle

UNE 20-501 Pt.2-30-1994 Basic environmental testing procedures. Part 2: Tests. Test Db and guidance: Damp heat, heat, cyclic (12 + 12 hour cycle)

中华人民共和国环境保护部, Emission test cycle

GB 7023-1986 Long-term leach testing of solidified radioactive waste forms

SE-SIS, Emission test cycle

SIS SS-ISO 6961:1984 Long-term leach testing of solidified radioactive waste forms

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Emission test cycle

SERIES L SUPP 26-2016 ITU-T L.1410 – Case study: The assessment of greenhouse gas emissions of a hybrid satellite broadband system over its life cycle (Study Group 5)

The Society for Protective Coatings (SSPC), Emission test cycle

SSPC TU 5-1999 Accelerated Testing of Industrial Protective Coatings

European Committee for Electrotechnical Standardization（CENELEC）, Emission test cycle

EN 60512-9-5:2010 Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

Indonesia Standards, Emission test cycle

SNI 01-7206-2006 Emission tests of formaldehyde of wood panels by gas analysis methods

JSAE - Society of Automotive Engineers of Japan@ Inc., Emission test cycle

JASO E501-1990 Test Method of Canisters for Automobile Evaporative Emission Control Systems

ES-UNE, Emission test cycle

UNE-EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)

API - American Petroleum Institute, Emission test cycle

API STD 622-2011 Type Testing of Process Valve Packing for Fugitive Emissions (Second Edition)
API STD 622-2006 Type Testing of Process Valve Packing for Fugitive Emissions (First Edition)

Standard Association of Australia （SAA）, Emission test cycle

AS/NZS 4266.16(Int):2001 Reconstituted wood-based panels - Methods of test - Formaldehyde emission - Desiccator method
AS/NZS 4266.16:2004 Reconstituted wood-based panels - Methods of test - Formaldehyde emission - Desiccator method

Association of German Mechanical Engineers, Emission test cycle

VDI 4221 Blatt 2-2017 Quality assurance - Requirements on interlaboratory tests in immission control - Design, performance and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions

AT-ON, Emission test cycle

ONORM S 5222-2-2000 Sealed radioactive sources-Leakage test methods for periodical inspections