ZH
RU
ES

Stability test cycle

Stability test cycle, Total:497 items.

In the international standard classification, Stability test cycle involves: Acoustics and acoustic measurements, Transport, Commercial vehicles, Fibre optic communications, Quality, Fuels, Analytical chemistry, Electrical engineering in general, Test conditions and procedures in general, Coatings and related processes used in aerospace industry, Industrial trucks, Sports equipment and facilities, Construction materials, Environmental testing, Rubber, Fluid storage devices, Heat recovery. Thermal insulation, Leather technology, Medical equipment, Microbiology, Measurement of volume, mass, density, viscosity, Road vehicles in general, Corrosion of metals, Mechanical testing, Environmental protection, Industrial automation systems, Electromechanical components for electronic and telecommunications equipment, Adhesives, Nuclear energy engineering, Wastes, Products of the chemical industry, Raw materials for rubber and plastics, Iron and steel products, Freight distribution of goods, Protective equipment, Lubricants, industrial oils and related products, Petroleum products in general, Mining and quarrying, Non-destructive testing, Protection against dangerous goods, Road engineering, Waxes, bituminous materials and other petroleum products, Packaging materials and accessories, Air quality, Internal combustion engines, Laboratory medicine, Paints and varnishes, Products of the textile industry, Furniture, Cycles, Pipeline components and pipelines, Internal combustion engines for road vehicles, Diagnostic, maintenance and test equipment, Radiation protection, Space systems and operations, Hydraulic fluids, Lifting equipment, Glass, Insulating fluids, Insulating materials, Footwear, Paint ingredients, Testing of metals, Energy and heat transfer engineering in general, Geology. Meteorology. Hydrology, Edible oils and fats. Oilseeds, Electronic component assemblies, Cellular materials, Farming and forestry, Pesticides and other agrochemicals, Road vehicle systems, Equipment for children, Insulation, Railway rolling stock, Electrical wires and cables, Petroleum, petroleum products and natural gas handling equipment, Semiconducting materials, Thermodynamics and temperature measurements, Protection against fire, Agricultural machines, implements and equipment, Motor cycles and mopeds, Bearings, Components for aerospace construction, Plastics, Standardization. General rules, Valves, Piezoelectric and dielectric devices.

International Electrotechnical Commission (IEC), Stability test cycle

IEC TS 62736:2016 Ultrasonics - Pulse-echo scanners - Simple methods for periodic testing to verify stability of an imaging system's elementary performance
IEC 60605-2:1994 Equipment reliability testing - Part 2: Design of test cycles
IEC 61672-3:2006 Electroacoustics - Sound level meters - Part 3: Periodic tests
IEC 61672-3:2013 Electroacoustics - Sound level meters - Part 3: Periodic tests
IEC TS 62736:2023 RLV Ultrasonics - Pulse-echo scanners - Simple methods for periodic testing to verify stability of an imaging system's elementary performance
IEC TS 62736:2023 Ultrasonics - Pulse-echo scanners - Simple methods for periodic testing to verify stability of an imaging system's elementary performance
IEC 60512-9-5:2010 Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
IEC 61125:2018 Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state
IEC 60811-408:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
IEC 62884-4:2019 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 4 : Short-term frequency stability test methods

Professional Standard - Traffic, Stability test cycle

JT/T 884-2014 Commercial vehicle anti-rolling stability test method.Steady circle test
JT/T 924-2014 The emulsified bitumen stability test-tube

American National Standards Institute （ANSI), Stability test cycle

ANSI/EIA/TIA 455-104A:1993 Fiber Optic Cable Cyclic Flexing Test
ANSI/ASTM D3316:1996 Test Method for Stability of Perchloroethylene with Copper

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Stability test cycle

GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB 5080.2 86 Equipment reliability testing Guidance for the design of test cycles
GB/T 5080.2-1986 Equipment reliability testing--Guidance for the design of test cycles
GB 5080.2-1986 Equipment reliability testing Guidance for the design of test cycles
GB/T 5080.2-2012 Reliability testing.Part 2:Design of test cycles
GB/T 6323.6-1994 Controllability and stability test procedure for automobiles-Steady static circular test procedure
GB 6323.6-1994 Automobile handling stability test method Steady state rotation test
GB/T 1670-2008 Plasticizers-test method of heat-resistance
GB/T 24175-2009 Test method for stability of steel slag
GB/T 24175-2009(英文版) Test method for stability of steel slag
GB/T 6323.1-1994 Controllability and stability test procedure for automobiles- Pylon course slalom test
GB/T 6753.3-1986 Methods of test for package stability of paints
GB/T 5141-2005 Counterbalanced fork-lift trucks-Stability test
GB/T 6323-2014 Automobile handling stability test method
GB/T 10357.4-1989 Test of mechanical properties of furniture--Stability of storage units
GB/T 6323.5-1994 Controllability and stability test procedure for automobiles-Steering efforts test procedure
GB/T 10357.2-1989 Test of mechanical properties of furniture--Stability of chairs and stools
GB/T 21280-2007 Test method of thermal stability for dangerous products
GB/T 10701-2008 Test methods for thermal stability of silica glass
GB/T 6323.4-1994 Controllability and stability test procedure for automobiles-Returnability test
GB/T 41600-2022 Straight-line driving stability test procedure for automobile
GB/T 5141-1985 Counter balanced lift trucks--Stability--Basic tests
GB/T 3903.10-2005 Footwear-Test methods for insoles--Dimensional stability
GB/T 3903.13-2005 Footwear-Test. method for outsoles-Dimensional stability
GB/T 18856.5-2008 Test methods for coal water mixture.Part 5:Determination of the stability
GB/T 13464-1992 Thermal analysis test methods for thermal stability of materials
GB/T 14172-1993 Static roll stability test method for motor vehicles
GB/T 13464-2008 Thermal analysis test methods for thermal stability of materials
GB/T 14172-2009 Static roll stability test method for motor vehicles
GB/T 5142-2005 Reach and straddle fork-lift trucks-Stability tests
GB/T 24680-2009 Agricultural sprayers.Boom steadiness.Test methods
GB/T 22420-2008 Bi-directional and multi-directional fork-lift trucks.Stability tests
GB/T 5142-1985 Reach and straddle fork lift trucks--Stability tests
GB/T 26946.1-2011 Single side loading fork-lift trucks.Part 1: Stability tests
GB/T 41603.2-2022 Self-propelled agricultural machinery—Assessment of stability—Part 2：Determination of static stability and test procedures
GB/T 10357.7-2013 Test of mechanical properties of furniture.Part 7:Stability of tables
GB/T 10357.4-2013 Test of mechanical properties of furniture.Part 4:Stability of storage units
GB/T 10357.4-2023 Furniture Mechanical Performance Test Part 4: Cabinet Stability
GB/T 29174-2012 Thermal analysis test method for constant-temperature stability of materials
GB/T 8811-2008 Rigid cellular plastics.Test method for dimensionsl stability
GB/T 8811-1988 Test method for dimensional stability of rigid cellular plastics

British Standards Institution (BSI), Stability test cycle

BS EN 61672-3:2007 Electroacoustics - Sound level meters - Periodic tests
BS EN 61672-3:2013 Electroacoustics. Sound level meters. Periodic tests
BS EN ISO 11640:1998 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing
BS EN 60512-9-5:2010 Connectors for electronic equipment - Tests and measurements - Endurance tests - Test 9e - Current loading, cyclic
BS EN ISO 11640:2012 Leather. Tests for colour fastness. Colour fastness to cycles of to-and-fro rubbing
BS EN 16306:2013 Natural stone test methods. Determination of resistance of marble to thermal and moisture cycles
BS ISO 8178-4:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Steady-state and transient test cycles for different engine applications
BS EN 13068-2:2000 Non-destructive testing - Radioscopic testing - Check of long term stability of imaging devices
BS EN 13640:2002 Stability testing of in vitro diagnostic reagents
BS EN 1968:2002 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders
BS ISO 13563-1:2001 Single side loading fork-lift trucks - Stability tests
BS 3726:1978 Specification for counterbalanced lift trucks - stability - basic tests
BS EN 1803:2002 Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders
BS EN 1802:2002 Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders
BS EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Cyclic bending test
BS EN 60811-408:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Long-term stability test of polyethylene and polypropylene compounds
BS EN 12800:2000 Footwear - Test methods for insoles - Dimensional stability
BS ISO 13562-1:2001 Industrial variable-reach trucks. Stability tests
BS ISO 22138:2022 Heavy commercial vehicles. Vehicle stability during tipper body operation. Tilt-table test method
BS EN 14617-12:2012 Agglomerate stone. Test methods. Determination of dimensional stability
BS EN 14617-12:2005 Agglomerated stone - Test methods - Determination of dimensional stability
PD IEC TS 62736:2023 Ultrasonics. Pulse-echo scanners. Simple methods for periodic testing to verify stability of an imaging system's elementary performance
BS EN 14363:2005 Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Testing of running behaviour and stationary tests
BS EN 14363:2006 Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Testing of running behavior and stationary tests
BS ISO 7171:2019 Furniture. Storage units. Test methods for the determination of stability
BS ISO 15794:2001 Bi-directional and multi-directional fork-lift trucks - Stability tests
BS EN 12772:2000 Footwear - Test methods for outsoles - Dimensional stability
BS EN 1730:2000 Domestic furniture. Tables. Test methods for determination of strength, durability and stability
22/30411190 DC BS ISO 22138. Heavy commercial vehicles. Vehicle stability during tipper body operation. Tilt-table test method

BE-NBN, Stability test cycle

Taiwan Provincial Standard of the People's Republic of China, Stability test cycle

CNS 12014-1987 Method of Test for Oxidation Stablity of Gasoline
CNS 13482-1995 Method of Test for Effects of Temperatures on Stability of Geotextiles
CNS 12212-1988 Method of Test for Thermal Oxidation Stability of Gear Lubricants
CNS 10371-1983 Method of Test for Storage Stability of Asphalt Emulsion
CNS 3653-2003 Method of test for edible oils and fats－AOM method for stability test
CNS 6263-7-1991 Method of Test for Strollers and Carriages(Test for Stability)
CNS 6263.7-1991 Method of Test for Strollers and Carriages(Test for Stability)

Society of Automotive Engineers (SAE), Stability test cycle

SAE ARP4992A-2004 Periodic Test Plan for Processing Solutions
SAE ARP4992B-2012 Periodic Test Plan for Processing Solutions
SAE J1597-2008 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
SAE J765-1990 Crane Load Stability Test Code
SAE ARP5483/6A-2018 Rolling Element Bearing Test Method for Dimensional Stability
SAE J1101-2020 Test Procedure for Parking Stability of Motorcycles
SAE J1101-2007 Test Procedure for Parking Stability of Motorcycles
SAE J1101-2012 Test Procedure for Parking Stability of Motorcycles
SAE ARP5483/6-2007 Rolling Element Bearing Test Method for Dimensional Stability
SAE ARP5483/6A-2013 Rolling Element Bearing Test Method for Dimensional Stability

未注明发布机构, Stability test cycle

SAE ARP4992B-2019 Periodic Test Plan for Processing Solutions

ES-AENOR, Stability test cycle

UNE 20-501 Pt.2-52-1986
UNE 20-501 Pt.2-21-1985
UNE 11-013-1989
UNE 11-015-1989
UNE 20-501 Pt.2-30-1994 Basic environmental testing procedures. Part 2: Tests. Test Db and guidance: Damp heat, heat, cyclic (12 + 12 hour cycle)
UNE 56-742-1988
UNE 31 013
UNE 11-017-1989

(U.S.) Telecommunications Industries Association , Stability test cycle

TIA-455-104-A-1993 FOTP-104 Fiber Optic Cable Cyclic Flexing Test

Japanese Industrial Standards Committee (JISC), Stability test cycle

JIS D 6011:1999 Fork lift trucks -- Stability and stability tests
JIS D 6014:1982 Order picking trucks -- Stability and stability tests
JIS B 7283:1997 Method of endurance test under cyclic load for spectacle frame
JIS C 5032:1975 Sealing (immersion cyclic) testing method for electronic components
JIS K 4822:2023 Reagents for stability tests of explosives
JIS D 6013:1982 Side fork lift trucks -- Stability and stability tests
JIS D 6011:1993 Fork lift trucks -- Stability and stability tests
JIS D 6011-1:2013 Fork lift trucks.Stability and verification of stability .Part 1: General
JIS A 1490:2022 Thermal insulation -- Test method for thermal diffusivity -- Periodic heat method
JIS Z 0170:1998 Unit loads -- Stability testing
JIS K 4822:2001 Reagents for stability tests of explosives
JIS K 4822:2019 Reagents for stability tests of explosives
JIS D 6012:1982 Reach fork lift trucks and straddle fork lift trucks -- Stability and stability tests
JIS K 5600-2-6:1999 Testing methods for paints -- Part 2: Characteristics and stability of paints -- Section 6: Pot life
JIS K 5600-2-6:2016 Testing methods for paints -- Part 2: Characteristics and stability of paints -- Section 6: Pot life
JIS K 2540:1989 Testing method for thermal stability of lubricating oils
JIS D 9203:1993 Method of stability test for bicycles
JIS K 4822 ERRATUM 1:2001 Reagents for stability tests of explosives (Erratum 1)
JIS K 5600-2-6 ERRATUM 1:2002 Testing methods for paints -- Part 2: Characteristics and stability of paints -- Section 6: Pot life (Erratum 1)
JIS D 6011-2:2013 Fork lift trucks.Stability and verification of stability .Part 2: Counterbalanced trucks
JIS K 4822 AMD 1:2017 Reagents for stability tests of explosives (Amendment 1)
JIS K 5600-2-7:1999 Testing methods for paints -- Part 2: Characteristics and stability of paints Section 7: Storage stability
JIS A 1122:1989 Method of test for soundness of aggregates by use of sodium sulfate
JIS K 5600-2-7 ERRATUM 1:2002 Testing methods for paints -- Part 2: Characteristics and stability of paints Section 7: Storage stability (Erratum 1)
JIS A 1122:1998 Method of test for soundness of aggregates by use of sodium sulfate

Korean Agency for Technology and Standards (KATS), Stability test cycle

KS R 6015-1995 Fork lift trucks-stability and stability tests
KS G ISO 7798:2004 Cross-country skis－Determination of fatigue indexes－Cyclic loading test
KS G ISO 6266:2009 Alpine skis-Determination of fatigue indexes-Cyclic loading test
KS G ISO 6266:2014 Alpine skis－Determination of fatigue indexes－Cyclic loading test
KS B 8545-2020 Test method for stability of intrincically-stable person carrier robot
KS B ISO 8379:2009 Rough terrain trucks-Stability tests
KS M ISO 11640:2006 Leather-Tests for colour fastness-Colour fastness to cycles of to-and-fro rubbing
KS M 5133-1995 Testing methods of heat stability for pigments
KS R 8006-2001 Method of stability test for bicycles
KS R 8006-1995 Method of stability test for bicycles
KS B ISO 1074:2008 Counterbalanced fork-lift trucks－Stability tests
KS R 1091-2004 REACH FORK LIFT TRUCKS AND STRADDLE FORK LIFT TRUCKS-STABILITY ANDSTABILITY TESTS
KS K 0608-2011 Test method for the shape retention of garments
KS K 0757-2011 Test method for effects of temperature on stability of geotextiles
KS M 2022-2007(2022) Testing method for thermal stability of lubricating oils
KS M 2022-1973 Testing method for thermal stability of lubricating oils
KS M 2022-1987 Testing method for thermal stability of lubricating oils
KS A ISO 6962-2012(2022) Nuclear energy－Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste
KS P ISO 11979-6:2021 Ophthalmic implants — Intraocular lenses —Part 6: Shelf-life and transport stability testing
KS A ISO 6962-2012(2017) Nuclear energy－Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste
KS A ISO 6962:2012 Nuclear energy-Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioN waste
KS M 2022-2007 Testing method for thermal stability of lubricating oils
KS B ISO 15794-2008(2013) Bi-directional and multi-directional fork-lift trucks－Stability tests
KS M 5133-2001(2006) TESTING METHODS OF HEAT STABILITY FOR PIGMENTS
KS M 2051-2011(2021) Testing method for working stability of lubricating grease
KS M ISO 11997-1:2011 Paints and varnishes-Determination of resistance to cyclic corrosion conditions-Part 1:Wet(salt fog)/dry/humidity
KS M 2020-2005 Testing method for oxidation characteristics of cylinder oils
KS M ISO 20873:2012 Footwear－Test methods for outsoles－Dimensional stability
KS M ISO 2796:2010 Cellular plastics, rigid－Test for dimensional stability
KS M 6698-2016 Chemical stability test methods for synthetic rubber latex
KS M 6697-2016 Mechanical stability test methods for compounded latex
KS M ISO 22651-2008(2018) Footwear－Test methods for insoles－Dimensional stability
KS M 6698-2016(2021) Chemical stability test methods for synthetic rubber latex
KS M ISO 2796-2010(2020) Cellular plastics, rigid－Test for dimensional stability
KS M 6697-1986 Mechanical stability test methods for compounded latex
KS M 6698-1986 Chemical stability test methods for synthetic rubber latex
KS C IEC 61125:2019 Insulating liquids — Test methods for oxidation stability — Test method for evaluating the oxidation stability of insulating liquids in the delivered state
KS B ISO 15794:2008 Bi-directional and multi-directional fork-lift trucks-Stability tests
KS M 2111-2004 Testing method for oxidation characteristics of lubrication oil for aircraft reciprocating engines
KS M ISO 22651:2008 Footwear－Test methods for insoles－Dimensional stability
KS M 2021-2016(2021) Testing methods for oxidation stability of internal combustion engine oil
KS B ISO 3184:2008 Reach and straddle fork-lift trucks－Stability tests
KS M 6697-2016(2021) Mechanical stability test methods for compounded latex
KS M 2111-1999 Testing method for oxidation characteristics of lubrication oil for aircraft reciprocating engines
KS M 2111-1986 Testing method for oxidation characteristics of lubrication oil for aircraft reciprocating engines
KS C IEC 60811-408-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 408: Miscellaneous tests ― Long-term stability test of polyethylene and polypropylene compounds
KS C IEC 60811-408:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 408: Miscellaneous tests ― Long-term stability test of polyethylene and polypropylene compounds
KS B ISO 13563-1:2008 Single side loading fork-lift trucks-Part 1:Stability tests
KS B ISO 13562-1-2014(2019) Industrial variable-reach trucks — Part 1: Stability test
KS M 6698-2022 Chemical stability test methods for synthetic rubber latex
KS B ISO 22915-5-2016(2021) Single side loading fork-lift trucks－Part 1：Stability tests
KS C IEC 62884-4:2022 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators — Part 4: Short-term frequency stability test methods

International Organization for Standardization (ISO), Stability test cycle

ISO 7798:1984 Cross-country skis; Determination of fatigue indexes; Cyclic loading test
ISO 7798:2017 Cross-country skis - Determination of fatigue indexes - Cyclic loading test
ISO 6406:2005 Gas cylinders - Seamless steel gas cylinders - Periodic inspection and testing
ISO 6962:1982 Standard method for testing the long term alpha irradiation stability of solidified high-level radioactive waste forms
ISO 11640:1993 Leather; tests for colour fastness; colour fastness to cycles of to-and-fro rubbing
ISO 11640:2018 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing
ISO 11640:2012 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing
ISO 1074:1991 Counterbalanced fork-lift trucks; stability tests
ISO 6962:2004 Nuclear energy - Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste
ISO/CD 9621 Space systems — Methods to decide thermal vacuum test cycles of recurring production according to precipitation efficiency and reliability
ISO 8379:1998/Amd 1:2001 Rough terrain trucks - Stability tests; Amendment 1
ISO 11997-1:2005 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity
ISO 8178-4:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state and transient test cycles for different engine applications
ISO 2796:1980 Cellular plastics — Test for dimensional stability of rigid materials
ISO 2796:1974 Title missing - Legacy paper document
ISO 20873:2001 Footwear - Test methods for outsoles - Dimensional stability
ISO 2796:1986 Cellular plastics, rigid; Test for dimensional stability
ISO 3184:1974 Reach and straddle fork lift trucks; Stability tests
ISO 1074:1975 Counterbalanced lift trucks — Stability — Basic tests
ISO/TR 18811:2018 Cosmetics - Guidelines on the stability testing of cosmetic products
ISO 20873:2018 Footwear - Test methods for outsoles - Dimensional stability
ISO/DIS 9621:1990 Space systems — Methods to decide thermal vacuum test cycles of recurring production according to precipitation efficiency and reliability
ISO 22138:2022 Heavy commercial vehicles — Vehicle stability during tipper body operation — Tilt-table test method
ISO 15794:2001 Bi-directional and multi-directional fork-lift trucks - Stability tests
ISO 22651:2002 Footwear - Test methods for insoles - Dimensional stability
ISO 3184:1998 Reach and straddle fork-lift trucks - Stability tests
ISO 19833:2018 Furniture - Beds - Test methods for the determination of stability, strength and durability
ISO 14131:2005 Agricultural sprayers - Boom steadiness - Test methods
ISO 13563-1:2001 Single side loading fork-lift trucks - Part 1: Stability tests
ISO 19682:2023 Furniture — Tables — Test methods for the determination of stability, strength and durability

Association Francaise de Normalisation, Stability test cycle

NF S52-709:1994 Alpine skis. Determination of fatigue indexes. Cyclic loading test.
NF S52-727:1994 Cross-country skis. Determination of fatigue indexes. Cyclic loading test.
NF S31-009-3*NF EN 61672-3:2014 Electroacoustics - Sound level meters - Part 3 : periodic tests
NF P84-102*NF EN 1108:1999 Flexible sheets for waterprooffing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclic temperature change
NF G52-350:2013 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing
NF P98-231-4:1992 Tests relating to pavements. Compaction tests on non bituminous materials. Part 4 : short term stability opf cementitious sands.
NF B10-642*NF EN 16306:2013 Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles
NF A09-250-2*NF EN 13068-2:2000 Non-destructive testing - Radioscopic testing - Part 2 : check of long term stability of imaging devices.
NF S92-032:2002 Stability testing of in vitro diagnostic reagents.
NF E29-785*NF EN 1968:2002 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders.
NF E29-785/A1*NF EN 1968/A1:2006 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders
NF ISO 6962:2006 Énergie nucléaire - Méthode d'essai normalisée de la stabilité à long terme à l'irradiation alpha des matrices de confinement des déchets radioactifs de haute activité
NF C93-400-9-5*NF EN 60512-9-5:2011 Connectors for electronic equipment - Tests and measurements - Part 9-5 : endurance tests - Test 9e : current loading, cyclic
NF E29-786:2002 Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders.
NF S94-750-6*NF EN ISO 11979-6:2014 Ophtalmic implants - Intraocular lenses - Part 6 : shelf-life and transport stability testing
NF E29-787:2002 Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders.
FD T75-642*FD ISO/TR 18811:2018 Cosmetics - Guidelines on the stability testing of cosmetic products
NF EN 12800:2000 Chaussures - Méthodes d'essai relatives aux premières de montage - Stabilité dimensionnelle
NF EN 12772:2000 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Stabilité dimensionnelle
NF EN IEC 61125:2018 Isolants liquides - Méthodes d'essai de la stabilité à l'oxydation - Méthode d'essai pour évaluer la stabilité à l'oxydation des isolants liquides tels que livrés
NF F01-363:2005 Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests.
NF C32-011-408*NF EN 60811-408:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 408 : miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
NF P18-588:1991 Aggregates - Dimensional stability test in alkali medium - Accelerated Mortar MICROBAR test
NF U02-005-2*NF EN ISO 16231-2:2015 Self-propeleld agricultural machinery - Assessment of stability - Part 2 : determination of static stability and test procedures
NF EN 60811-408:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 408 : essais divers - Essai de stabilité à long terme pour les mélanges polyéthylène et polypropylène
NF G62-204*NF EN 12800:2000 Footwear - Test methods for insoles - Dimensional stability.
NF G62-306*NF EN 12772:2000 Footwear - Test methods for outsoles - Dimensional stability
NF T66-024:1984 BITUMEN EMULSIONS. TEST OF STABILITY WITH CEMENT.
NF D62-003*NF EN 1730:2012 Furniture - Tables - Test methods for the determination of stability, strength and durability

German Institute for Standardization, Stability test cycle

DIN ISO 7798:1985 Cross-country skis; determination of fatigue indexes; cyclic loading test
DIN ISO 7798:2018 Cross-country skis - Determination of fatigue indexes - Cyclic loading test (ISO 7798:2017)
DIN EN 1968:2005 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders; English version of DIN EN 1968:2002 + A1:2005
DIN EN 13068-2:2000 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices; German version EN 13068-2:1999
DIN 55415:2022-09 Transport stability - Test methods to determine the transport stability of unit loads in intermodal transportation
DIN 55415:2022 Transport stability - Test methods to determine the transport stability of unit loads in intermodal transportation
DIN EN 12772:2000 Footwear - Test methods for outsoles - Dimensional stability; German version EN 12772:1999
DIN EN 12772:2000-01 Footwear - Test methods for outsoles - Dimensional stability; German version EN 12772:1999 / Note: To be replaced by DIN EN ISO 20873 (2016-01).
DIN EN 12800:2000 Footwear - Test methods for insoles - Dimensional stability; German version EN 12800:2000
DIN EN 1730:2013-01 Furniture - Tables - Test methods for the determination of stability, strength and durability; German version EN 1730:2012
DIN EN 16306:2013 Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles; German version EN 16306:2013

RU-GOST R, Stability test cycle

GOST R EN 1108-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of form stability under cyclical temperature changes
GOST 28216-1989 Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
GOST ISO 11640-2014 Leather. Tests for colour fastness to cycles of to-and-fro rubbing
GOST EN 1108-2012 Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of form stability under cyclical temperature changes
GOST 23.205-1979 Products wear resistance assurance. Accelerated life tests by inguiry method
GOST 33403-2015 Testing of chemicals of environmental hazard. Screening test for thermal stability and stability in air
GOST 30211-1994 Furniture. Chairs. Determination of stability
GOST 22290-1976 Vitreous silica transparent glass. Crystallization stability test method
GOST 27711-1988 Dipping varnishes. Method for accelerated determination of thermal endurance
GOST 28097-1989 Varnished cloth. Methods for accelerated determination of thermal endurance
GOST 22290-2021 Vitreous silica transparent glass. Crystallization stability test method
GOST 33365-2015 Residual fuel oils. Test for straight-run. Method for determination of stability and compatibility by spot
GOST 28747-1990 Insulating flexible tubes. Accelerated test method for heating resistance
GOST R 57822-2017 Perchloroethylene. Test method for stability at contact with copper
GOST 7934.4-1974 Watch greases. Method for the determination of colloid stability
GOST IEC 60811-408-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 408. Miscellaneous tests. Long-term stability test of polyethylene and polypropylene compounds
GOST 27712-1988 Laminated plastic sheets. Methods for accelerated determination of thermal endurance
GOST 28096-1989 Slot insulation materials. Method for accelerated determination of thermal endurance
GOST R 51368-1999 Climatic environment stability test methods for machines, instruments and other industrial products. Test for stability influence of temperature
GOST R 50837.7-1995 Residual fuel oils. Test for straight-run. Method for determination of stability and compatibility by spot
GOST EN 1730-2013 Domestic furniture. Tables. Test methods for determination of strength, durability and stability
GOST 27697-1988 Industrial robots. Cyclic, point-to-point and continuous path of numerical control. Specifications and testing methods

International Truck and Engine Corporation (ITEC), Stability test cycle

INTERN CEMS BT-13-2009 Stability Heating Test
INTERN CEMS BT-25-2009 Fuel Stability Test
INTERN CEMS BT-17-2009 Oxidation Stability Test
INTERN CEMS GT-10-2009 Heated Paint Stability Test
INTERN CEMS BT-47-2009 Stability Test For Distillate Fuel

American Society for Testing and Materials (ASTM), Stability test cycle

ASTM D4482-99 Standard Test Method for Rubber Property-Extension Cycling Fatigue
ASTM D4482-06 Standard Test Method for Rubber Property-Extension Cycling Fatigue
ASTM D525-12 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
ASTM D525-12a Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
ASTM D4482-11 Test Method for Rubber PropertyExtension Cycling Fatigue
ASTM D525-01 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
ASTM D525-00 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
ASTM D4482-07 Standard Test Method for Rubber Property-Extension Cycling Fatigue
ASTM E1193-20 Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests
ASTM D7109-07 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles
ASTM D6899-03 Standard Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel
ASTM E1193-97(2012) Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests
ASTM D1183-03 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D1183-03(2011) Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D7342-07 Standard Test Method for Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test)
ASTM D8022-20 Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)
ASTM D7342-20 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
ASTM E1191-03 Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM E1191-03a Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM E1193-97 Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests
ASTM E1193-97(2004) Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests
ASTM E1191-03a(2023) Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM E1191-03A(2023)e1 Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM E1191-03a(2014) Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM D4279-95(2003) Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
ASTM D4279-95 Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
ASTM E1191-97 Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM E1562-00(2006) Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids
ASTM D8022-15 Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)
ASTM D2143-00 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D2143-94 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D2143-00(2005)e1 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D2143-00(2010) Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D2143-21 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D2143-15 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D4279-95(2009) Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
ASTM E1942-98(2010) Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM F2125-05 Standard Test Method for Treestand Static Stability
ASTM F2125-09 Standard Test Method for Treestand Static Stability and Adherence
ASTM D2070-91(1996) Standard Test Method for Thermal Stability of Hydraulic Oils
ASTM F2125-01 Standard Test Method for Treestand Static Stability
ASTM D2070-16 Standard Test Method for Thermal Stability of Hydraulic Oils
ASTM D2070-16e1 Standard Test Method for Thermal Stability of Hydraulic Oils
ASTM E1562-22 Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids
ASTM D1479-64(1978)e1 Method of Test for Emulsion Stability of Soluble Cutting Oils
ASTM D3137-81(1994) Standard Test Method for Rubber Property8212;Hydrolytic Stability
ASTM D3137-81(2001) Standard Test Method for Rubber Property8212;Hydrolytic Stability
ASTM D3137-81(2007) Standard Test Method for Rubber Property8212;Hydrolytic Stability
ASTM D3137-81(2013) Standard Test Method for Rubber Propertymdash;Hydrolytic Stability
ASTM D4499-95(2000) Standard Test Method for Heat Stability of Hot-Melt Adhesives
ASTM F1212-89(2002) Standard Test Method for Thermal Stability Testing of Gallium Arsenide Wafers
ASTM F1212-89(1996)e1 Standard Test Method for Thermal Stability Testing of Gallium Arsenide Wafers
ASTM D2070-91(2001) Standard Test Method for Thermal Stability of Hydraulic Oils
ASTM D449-89(1999)e1 Standard Specification for Asphalt Used in Dampproofing and Waterproofing
ASTM D4594-96(2009) Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM D8309-21 Standard Guide for Stability Testing of Cannabis-Based Products
ASTM D1849-95(2019) Standard Test Method for Package Stability of Paint
ASTM D1849-95(2014)e1 Standard Test Method for Package Stability of Paint
ASTM D2070-91(2006) Standard Test Method for Thermal Stability of Hydraulic Oils
ASTM D2070-91(2010) Standard Test Method for Thermal Stability of Hydraulic Oils
ASTM D7342-15 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
ASTM D2619-09 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
ASTM D3137-81(2018) Standard Test Method for Rubber Property—Hydrolytic Stability
ASTM E2550-17 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D1831-18 Standard Test Method for Roll Stability of Lubricating Grease
ASTM D1831-00 Standard Test Method for Roll Stability of Lubricating Grease
ASTM D1831-94e1 Standard Test Method for Roll Stability of Lubricating Grease
ASTM D1831-00e1 Standard Test Method for Roll Stability of Lubricating Grease
ASTM D2440-99(2004) Standard Test Method for Oxidation Stability of Mineral Insulating Oil
ASTM D1831-00(2006) Standard Test Method for Roll Stability of Lubricating Grease
ASTM D2440-99 Standard Test Method for Oxidation Stability of Mineral Insulating Oil
ASTM D1831-19 Standard Test Method for Roll Stability of Lubricating Grease
ASTM D2337-01(2005) Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers
ASTM D1831-19a Standard Test Method for Roll Stability of Lubricating Grease
ASTM D2337-01(2010) Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers
ASTM D1831-20 Standard Test Method for Roll Stability of Lubricating Grease
ASTM D2337-84(1996)e1 Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers
ASTM D1831-11 Standard Test Method for Roll Stability of Lubricating Grease
ASTM D1831-21 Standard Test Method for Roll Stability of Lubricating Grease
ASTM F1373-93(2005) Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
ASTM F1373-93(2012) Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components

Danish Standards Foundation, Stability test cycle

DS/ISO 21901:2021 Thermal insulation – Test method for thermal diffusivity – Periodic heat method
DS/ISO 2796:2011 Cellular plastics, rigid - Test for dimensional stability
DS/INSTA 216:1990 Plastics pipes. Thermoanalytic test methods for the determination on oxidation stability
DS/EN 12800:2000 Footwear - Test methods for insoles - Dimensional stability
DS/EN 12772:2000 Footwear - Test methods for outsoles - Dimensional stability
DS/ISO 14131:2007 Agricultural sprayers - Boom steadiness - Test methods
DS/EN 60811-408:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
DS/EN 1730:2012 Furniture - Tables - Test methods for the determination of stability, strength and durability

IT-UNI, Stability test cycle

UNI 4520-1966

International Federation of Trucks and Engines, Stability test cycle

NAVISTAR CEMS BT-13-2009 Stability Heating Test
NAVISTAR CEMS BT-47-2009 Stability Test For Distillate Fuel

GM North America, Stability test cycle

GM GM9642P-1991 ELPO - 30 Day Stability Test
GM GM9059P-1988 Test for Thermal-Oxidative Stability Characteristics of Plastics
GM GM4479P-1988 Mechanical Stability of Grease Shell Roller Test

IN-BIS, Stability test cycle

North Atlantic Treaty Organization Standards Agency, Stability test cycle

STANAG 4556-1999 EXPLOSIVES, VACUUM STABILITY TEST

KR-KS, Stability test cycle

KS B ISO 8379-2009 Rough terrain trucks－Stability tests
KS M 2171-2018(2023) Testing method for thermal and oxidation stability of heat treating oils
KS B ISO 1074-2008 Counterbalanced fork-lift trucks－Stability tests
KS P ISO 11979-6-2021 Ophthalmic implants — Intraocular lenses —Part 6: Shelf-life and transport stability testing
KS C IEC 61125-2019 Insulating liquids — Test methods for oxidation stability — Test method for evaluating the oxidation stability of insulating liquids in the delivered state
KS B ISO 3184-2008 Reach and straddle fork-lift trucks－Stability tests
KS C IEC 60811-408-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 408: Miscellaneous tests ― Long-term stability test of polyethylene and polypropylene compounds
KS B ISO 22915-5-2016 Single side loading fork-lift trucks－Part 1：Stability tests
KS C IEC 62884-4-2022 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators — Part 4: Short-term frequency stability test methods

RO-ASRO, Stability test cycle

STAS 11232/4-1981 Stabilized power supplies, d.c. output PERIODIC AND RANDOMDEVIATION, DRIFT, OUTPUT IMPEDANCES Prescriptions

Professional Standard - Agriculture, Stability test cycle

GB/T 2829-1987 Periodic inspection counting sampling procedure and sampling table (applicable to the inspection of the stability of the production process)
GB 6753.3-1986 Test method for storage stability of coatings
NY/T 1427-2016 Guidelines for storage stability testing of pesticides at ambient temperature
NY/T 1427-2007 Guidelines for Testing Stability of Pesticides at Ambient Temprature
NY/T 2003-2011 Method for determination of oxidation stability of rapeseed oil.Accelerated oxidation test
NY/T 1929-2010 Test methods of static lateral stability for wheeled tractors
NY/T 1860.4-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 4:Thermal stability

European Committee for Standardization (CEN), Stability test cycle

EN ISO 11640:2012 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012)
EN ISO 11623:2002 Transportable Gas Cylinders - Periodic Inspection and Testing of Composite Gas Cylinders ISO 11623: 2002
EN ISO 11640:1998 Leather - Tests for Colour Fastness - Colour Fastness to Cycles of to-and-fro Rubbing ISO 11640:1993
EN 1802:2002 Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders
EN 1803:2002 Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders
EN 12772:1999 Footwear - Test Methods for Outsoles - Dimensional Stability
EN 14617-12:2012 Agglomerated stone - Test methods - Part 12: Determination of dimensional stability
EN 12800:2000 Footwear - Test methods for insoles - Dimensional stability

CEN - European Committee for Standardization, Stability test cycle

EN ISO 11640:2018 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing
EN 14617-12:2005 Agglomerated stone - Test methods - Part 12: Determination of dimensional stability

Standard Association of Australia （SAA）, Stability test cycle

AS/NZS 2512.7.1:2006 Methods of testing protective helmets - Determination of stability of protective helmets - Static stability
AS/NZS 2512.7.2:2009
AS 2582.16:2006 Complete, filled transport packages - Methods of test - Stability testing of unit loads

Canadian General Standards Board （CGSB), Stability test cycle

CGSB 1-GP-71 METH 30.6-1980 Methods of Testing Paints and Pigments Accelerated Stability Heat Stability
CGSB 1-GP-71 METH 31.3-1982 Methodes D'Essai Des Peintures Et Pigments Stabilite A Basse Temperature Stabilite A -20 Degrees C
CGSB 1-GP-71 METH 45.2-1980 Methodes D'Essai Des Peintures Et Pigments Stabilite A La Dilution

Professional Standard - Energy, Stability test cycle

NB/SH/T 0872-2013 Standard test method for determination of shear stability of lubricating grease in presence of water (water stability test)
NB/SH/T 0906-2015 Determination of high temperature deposits of engine oils by hot tube test

National Metrological Verification Regulations of the People's Republic of China, Stability test cycle

JJG(交通) 116-2014 The Emulsified Bitumen Stability Test-tube
JJG 116-2014 Emulsified asphalt stability test tube

GM Daewoo, Stability test cycle

GMKOREA EDS-T-7722-2011
GMKOREA EDS-T-7729-2011
GMKOREA EDS-T-7926-2011 Test Method for Shear Stability of Petroleum Products
GMKOREA EDS-T-7656-2011

Professional Standard - Petrochemical Industry, Stability test cycle

SH/T 0728-2004 Test method for odor stability of paraffin wax
SH/T 0644-1997 Test method for low temperature stability of aviation hydraulic oil

Group Standards of the People's Republic of China, Stability test cycle

T/GDCQMA 002-2023 Cosmetic Stability Test Specifications
T/SHFCA 002-2021 Guidelines for Stability testing of cosmetic
T/CAMS 156-2023 Specifications for drug stability test chambers
T/PTSHOES 0012-2022 Test method for anti-twist stability performance of whole shoes

European Committee for Electrotechnical Standardization（CENELEC）, Stability test cycle

EN 60512-9-5:2010 Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
EN IEC 61125:2018 Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state

YU-JUS, Stability test cycle

JUS Z.S3.233-1987 Counterbalanced lift trucks. Stability. Basic tests
JUS Z.S3.234-1987 Reach and straddle fork lift trucks. Stability tests

PL-PKN, Stability test cycle

PN M78041-1974 Drived front lift truck Additional stability test
PN C89083-1992 Cellular plastics, rigid. Test for dimensional stability
PN M78040-1968 Drived front lift trucks Basic stability tests

Professional Standard - Forestry, Stability test cycle

LY/T 1928-2010 Test methods for stability of rosin resins

SAE - SAE International, Stability test cycle

SAE J1597-1988 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure Cycle Durability
SAE J1597-2016 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
SAE J1597-2021 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure Cycle Durability

CZ-CSN, Stability test cycle

CSN IEC 1070:1994 Compliance test procedures for steady-state availability
CSN 65 6236 Cast.1-1991 Oxidation stability test of compressor oil
CSN 58 8778-1994 Methods of test for fats and oils Determination of oxidative stability (quick oxidative test)
CSN 66 8028-1973 Stability lot according to Bergmann-.Junk
CSN 58 8793-1994 Methods of test for fats and oils Determination of stability of fats and oils by Schaal test

FI-SFS, Stability test cycle

SFS 2678 S-1977 stability of counterbalanced lift trucks .basic tests

National Metrological Technical Specifications of the People's Republic of China, Stability test cycle

JJF(石化) 030-2020 Calibration Specification for Thermal Stability Test at 75 ℃ Device
JJF(石化)030-2020 Calibration Specification for Thermal Stability Test at 75 ℃ Device

工业和信息化部, Stability test cycle

YS/T 1264-2018 Test method for thermal stability of titanium alloys

国家市场监督管理总局、中国国家标准化管理委员会, Stability test cycle

GB/T 39476-2020 Testing method of energy efficiency for drug stability test chambers
GB/T 39221-2020 Determination for performance of scale inhibitors for reverse osmosis seawater desalination—Recurrent condensation cycle test method
GB/T 3903.13-2020 Footwear—Test methods for outsoles—Dimensional stability
GB/T 40326-2021 Energy efficiency grades for laboratory equipment—Drug stability test chambers
GB/T 40501-2021 General condition of vehicle dynamics test for passenger cars
GB/T 40499-2021 General condition of vehicle dynamics test for heavy vehicles and buses

AENOR, Stability test cycle

UNE 11017:1989 TEST METHODS FOR DETERMINATION OF STABILITY OF STORAGE FURNITURE.
UNE-EN 12772:2000 FOOTWEAR - TEST METHODS FOR OUTSOLES - DIMENSIONAL STABILITY
UNE-EN 12800:2001 FOOTWEAR - TEST METHODS FOR INSOLES - DIMENSIONAL STABILITY.
UNE-EN 60811-408:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
UNE 51102:1980 STANDARD TEST METHOD FOR ROLL STABILITY OF LUBRICATING GREASE
UNE 31012:1954 STABILITY TEST OF NITROCELULOSES OR OF COLLOIDAL POWDERS TO HIGH TEMPERATURE, BY OBSERVATION WITH TEST PAPER TO VOILET METHYL.
UNE-EN 1730:2013 Furniture - Tables - Test methods for the determination of stability, strength and durability

(U.S.) Ford Automotive Standards, Stability test cycle

FORD FLTM AK 002-01-2001 ACID ACCEPTANCE AND STABILITY TESTS FOR TRICHLORETHYLENE

SE-SIS, Stability test cycle

SIS SS 16 95 11-1980 Rigid cellular plastics — Test for dimensional stability
SIS SMS 2788 E-1970 Truckar och lyftvagnar. Stabilitetsprovning av h?glyftande frontlastande motviktstruckar
SIS SS-ISO 3184:1987 Reach and straddle fork lift trucks — Stability tests

Professional Standard - Petroleum, Stability test cycle

SY/T 0039-2013 Test method for chemical resistance of pipeline coatings
SY/T 0039-1997 Test method for chemical resistance of pipeline coatings

Professional Standard - Electron, Stability test cycle

SJ/T 11497-2015 Test method for thermal stability testing of gallium arsenide wafers

Lithuanian Standards Office , Stability test cycle

LST EN 12772-2002 Footwear - Test methods for outsoles - Dimensional stability
LST EN 12800-2001 Footwear - Test methods for insoles - Dimensional stability
LST EN 1730-2013 Furniture - Tables - Test methods for the determination of stability, strength and durability

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Stability test cycle

GB/T 34711-2017 Testing method for classification of chemically unstable gases
GB/T 26949.20-2016 Industrial trucks—Verification of stability—Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization

Military Standard of the People's Republic of China-General Armament Department, Stability test cycle

GJB 1993-1994 Torpedo shell strength and stability test method
GJB 1993A-2021 Torpedo shell strength and stability test method
GJB 8699.8-2015 Aerial Bomb Test Methods Part 8: Ballistic Performance Test Flight Stability
GJB 164.7-1986 Landing ship mooring and navigation test procedures course stability test

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Stability test cycle

GJB 5389.22-2005 Test method of gun-launched missile Part 22:Vibrating stability test
GJB 5496.8-2005 Test method of aerial bomb Part 8：Ballistic performance test-Flight stability
GJB 5491.19-2005 Test method of terminally guided projectile Part 19:Vibration stability test
GJB 5895.24-2006 Test method for anti-tank missile Part 24: Vibrating stability test

GOSTR, Stability test cycle

GOST ISO 16231-2-2019 Self-propelled agricultural machinery. Assessment of stability. Part 2. Determination of static stability and test procedures
GOST R 57630-2017 Ultrasonics. Pulse-echo scanners. Simple methods for periodic testing to verify stability of an imaging system's elementary performance

CENELEC - European Committee for Electrotechnical Standardization, Stability test cycle

EN 60811-408:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds

US-CFR-file, Stability test cycle

CFR 46-61.40-2014 Shipping. Part61:Periodic tests and inspections. Subpart61.40:Design verification and periodic testing of vital system automation. Section61.40-10:Test procedure details.

VN-TCVN, Stability test cycle

TCVN 6440-2-2009 Motorcycles.Measurement method for gaseous exhaust emissions and fuel consumption.Part 2: Test cycles and specific test conditions

JSAE - Society of Automotive Engineers of Japan@ Inc., Stability test cycle

JASO M347-1995 Test method for shear stability of automatic transmission fluids

ZA-SANS, Stability test cycle

SANS 13563-1:2007 Single side loading fork-lift trucks Part 1: Stability tests

Professional Standard - Aviation, Stability test cycle

HB 5329-1993 Test method for storage stability of anaerobic adhesives used in aviation

Professional Standard - Public Safety Standards, Stability test cycle

GA/T 76-1994 Test method for thermal analysis of the constant temperature stability of substances

Professional Standard - Aerospace, Stability test cycle

QJ 2030-1990 Test method for stability of chemical oxide film on iron and steel