ZH

RU

ES

MS not responding

MS not responding, Total:238 items.

In the international standard classification, MS not responding involves: Optoelectronics. Laser equipment, Electronic tubes, Solar energy engineering, Pesticides and other agrochemicals, Photography, Analytical chemistry, Optics and optical measurements, Powder metallurgy, Rotating machinery, Astronomy. Geodesy. Geography, First aid, General methods of tests and analysis for food products, Environmental testing, Vibrations, shock and vibration measurements, Medical equipment, Water quality, Protective equipment, Radiation measurements, Non-ferrous metals, Cinematography, Food products in general, Quality, Metrology and measurement in general, Air quality, Farming and forestry, Fuel cells, Graphic technology, Construction materials, Textile fibres, Petroleum products in general, Corrosion of metals.


IETF - Internet Engineering Task Force, MS not responding

  • RFC 8246-2017 HTTP Immutable Responses
  • RFC 8197-2017 A SIP Response Code for Unwanted Calls
  • RFC 4721-2007 Mobile IPv4 Challenge/Response Extensions (Revised)
  • RFC 2195-1997 IMAP/POP AUTHorize Extension for Simple Challenge/Response
  • RFC 5802-2010 Salted Challenge Response Authentication Mechanism (SCRAM) SASL and GSS-API Mechanisms

Professional Standard - Electron, MS not responding

  • SJ 2354.7-1983 Method of measurement for spectral response curve and spectral response range of PIN and avalanche photodiodes

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, MS not responding

  • GB/T 5295-2012 The spectral response characteristic series of photocathodes
  • GB/T 11009-1989 Measuring methods of spectral response for solar cells
  • GB 5295-1985 The spectral response characteristic series of photocathodes
  • GB/T 5295-1985 The spectral response characteristic series of photocathodes
  • GB/Z 26209-2010 Determination of the spectral responsivity of optical radiation detectors
  • GB/T 6495.8-2002 Photovoltaic devices part 8: Measurement of spectral response of a photovoltaic(PV) device
  • GB/T 22713-2008 Effects of unbalanced voltages on the performance of three-phase cage induction motor
  • GB/T 31886.1-2015 Test method about the influence of gaseous contaminants in reaction gas on the performance of proton exchange membrane fuel cells.Part 1:Gaseous contaminants in air
  • GB/T 31886.2-2015 Test method about the influence of gaseous contaminants in reaction gas on the performance of proton exchange membrane fuel cells.Part 2:Gaseous contaminants in hydrogen
  • GB/T 2423.57-2008 Environmental testing for electric and electronic products.Part 2: Tests.Test Ei: Shock.Shock response spectrum synthesis

National Metrological Technical Specifications of the People's Republic of China, MS not responding

  • JJF 1903-2021 Calibration Specification for Shock Response Spectrum Testing Machines
  • JJF 1655-2017 Calibration Specification for Solar Cells:Spectral Responsivity
  • JJF 1150-2006 Calibration Specification for Relative Spectral Responsivity
  • JJF 2064-2023 Calibration Specification for Multi-junction GaAs Solar Cells—Spectral Responsivity

European Committee for Standardization (CEN), MS not responding

  • PD CEN/TR 16468:2013 Food analysis - Determination of pesticide residues by GC-MS - Retention times@ mass spectrometric parameters and detector response information
  • CEN/TR 16468:2013 Food analysis - Determination of pesticide residues by GC-MS - Retention times, mass spectrometric parameters and detector response information
  • HD 478.3.4 S1-1989 Classification of environmental conditions; part 3: classification of groups of environmental parameters and their severities; stationary use at non-weatherprotected locations
  • EN ISO 17294-1:2006 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines
  • EN ISO 15061:2001 Water Quality - Determination of Dissolved Bromate - Method by Liquid Chromatography of Ions ISO 15061:2001
  • EN ISO 17294-2:2004 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of 62 elements (ISO 17294-2:2003)

US-FCR, MS not responding

American National Standards Institute (ANSI), MS not responding

Electronic Components, Assemblies and Materials Association, MS not responding

  • ECA TEP 150-1964 Relative Spectral Response Data for Photosensitive Devices ("S" Curves)

Group Standards of the People's Republic of China, MS not responding

  • T/CIMA 0019-2019 Proton transfer reaction mass spectrometers
  • T/CITS 0006-2023 General Principles of Medical Nucleic Acid Mass Spectrometry Application Technology

Korean Agency for Technology and Standards (KATS), MS not responding

  • KS C 8525-2005(2010) Measuring methods of spectral response forcrystalline solar cells
  • KS C 8525-2005 Measuring methods of spectral response forcrystalline solar cells
  • KS C 8525-1995 Measuring methods of spectral response for crystalline solar cells
  • KS C IEC 60904-8:2005 Photovoltaic devices-Part 8:Measurement of spectral response of a photovoltaic(PV) device
  • KS C IEC 60904-8:2015 Photovoltaic devices — Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device
  • KS C IEC 60904-8-2015(2020) Photovoltaic devices — Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device
  • KS I ISO 17294:2014 Water quality — Application of inductively coupled plasma mass spectrometry(ICP-MS)
  • KS I ISO 17294-2014(2021) Water quality — Application of inductively coupled plasma mass spectrometry(ICP-MS)
  • KS B ISO 18431-4:2017 Mechanical vibration and shock — Signal processing — Part 4: Shock-response spectrum analysis
  • KS I ISO 17294-1:2010 Water quality-Application of inductively coupled plasma mass spectrometry(ICP-MS)-Part 1:General guidelines
  • KS C IEC 60068-2-81:2005 Environmental testing-Part 2-81:Tests-Test Ei:Shock-Shock response spectrum synthesis
  • KS C IEC 60068-2-81:2020 Environmental testing — Part 2-81: Tests — Test Ei: Shock —Shock response spectrum synthesis
  • KS A ISO 11929-8-2008(2013) Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 8:Fundamentals and application to unfolding of spectrometric measurements without the influence of
  • KS A ISO 20859:2010 Cinematography-Spectral response of photographic audio reproducers for analog dye sound racks on 35 mm film
  • KS I ISO 17294-2:2010 Water quality-Application of inductively coupled plasma mass spectrometry(ICP-MS)-Part 2:Determination of 62 elements
  • KS C IEC 60034-26:2014 Rotating electrical machines — Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors
  • KS A ISO 11929-3:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 3:Fundamentals and application to counting measurements by high resolution gamma spectrometry without the influence of sample treatment
  • KS A ISO 11929-3:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 3:Fundamentals and application to counting measurements by high resolution gamma spectrometry without the influence of sample treatment
  • KS A ISO 20859-2010(2020) Cinematography-Spectral response of photographic audio reproducers for analog dye sound racks on 35 mm film
  • KS A ISO 11929-3-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 3:Fundamentals and application to counting measurements by high resolution gamma spectrometry witho

American Society for Testing and Materials (ASTM), MS not responding

  • ASTM E1021-95(2001) Standard Test Methods for Measuring Spectral Response of Photovoltaic Cells
  • ASTM E1021-95 Standard Test Methods for Measuring Spectral Response of Photovoltaic Cells
  • ASTM D4626-95(2000) Standard Practice for Calculation of Gas Chromatographic Response Factors
  • ASTM E1021-15(2019) Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
  • ASTM D4626-95(2019) Standard Practice for Calculation of Gas Chromatographic Response Factors
  • ASTM E1021-15 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
  • ASTM D4626-95(2015) Standard Practice for Calculation of Gas Chromatographic Response Factors
  • ASTM D4626-95(2005) Standard Practice for Calculation of Gas Chromatographic Response Factors
  • ASTM D4626-95(2010) Standard Practice for Calculation of Gas Chromatographic Response Factors
  • ASTM F1127-22 Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel
  • ASTM E1021-06 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
  • ASTM E984-95(2001) Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
  • ASTM E984-95 Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
  • ASTM E984-12(2020) Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
  • ASTM E983-10 Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
  • ASTM C692-13(2018) Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
  • ASTM C692-13(2023) Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
  • ASTM E2236-10(2019) Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
  • ASTM E983-94(1999) Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
  • ASTM E983-10(2018) Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
  • ASTM E983-05 Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
  • ASTM E983-19 Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
  • ASTM E746-17 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
  • ASTM E746-18 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
  • ASTM D8460-22 Standard Test Method for Quantification of Volatile Organic Compounds Using Proton Transfer Reaction Mass Spectrometry
  • ASTM F1943-98 Standard Test Method for Determining the Dynamic Thermal Response of Thermal Mass Transfer Ribbon Products-Atlantek Method
  • ASTM D2504-88(2004)e1 Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography
  • ASTM C692-05 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
  • ASTM C692-06 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
  • ASTM C692-00 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
  • ASTM E2334-09(2018) Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-Conformities, Using Attribute Data, When There is a Zero Respo
  • ASTM E2334-09(2013) Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample
  • ASTM D7598-16(2017) Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
  • ASTM D8025-23 Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
  • ASTM D7598-09 Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
  • ASTM D7598-09e1 Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
  • ASTM D8025-16 Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry

International Commission on Illumination (CIE), MS not responding

  • CIE 64-1984 Determination of the Spectral Responsivity of Optical Radiation Detectors (E)
  • CIE 202-2011 SPECTRAL RESPONSIVITY MEASUREMENT OF DETECTORS, RADIOMETERS AND PHOTOMETERS

National Aeronautics and Space Administration (NASA), MS not responding

RO-ASRO, MS not responding

  • STAS SR EN 23908-1995 Hardmetals. Determination of insoluble (free) carbon con-tent. Gravimetric method
  • STAS SR CEI 892-1995 Effects of unbalanced voltages on the performance of three-phase cage induction motors

US-Unspecified Preparing Activity, MS not responding

National Metrological Verification Regulations of the People's Republic of China, MS not responding

  • JJG 685-1990 Verification Regulation of Relative Spectral Responsivity for Photoelectric Detector
  • JJG(电子) 30902-2006 Specification for verification of absolute spectral response rate of photodetectors

ECIA - Electronic Components Industry Association, MS not responding

  • TEP 150-1964 "Relative Spectral Response Data for Photosensitive Devices (""S"" Curves)"

Japanese Industrial Standards Committee (JISC), MS not responding

  • JIS C 8944:2009 Measuring methods of spectral response for multi-junction solar cells
  • JIS C 60068-2-81:2007 Environmental testing -- Part 2-81: Shock -- Shock response spectrum synthesis
  • JIS C 8915:1998 Measuring methods of spectral response for crystalline solar cells and modules
  • JIS C 8904-8:2019 Photovoltaic devices -- Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device

Society of Motion Picture and Television Engineers (SMPTE), MS not responding

  • SMPTE ST 2065-2-2012 Academy Printing Density (APD) - Spectral Responsivities, Reference Measurement Device and Spectral Calculation
  • SMPTE RP 109-1994 Spectral Response of Photographic Audio Reproducers for 8-mm Type S Motion-Picture Film
  • SMPTE 411M-2006 Motion-Picture Film - Cinematography - Spectral Response of Photographic Audio Reproducers for Analog Dye Sound-Tracks on 35-mm Film

Professional Standard - Machinery, MS not responding

  • JB/T 9478.9-2013 Photovoltaic Cell Measurement Methods Part 9: Spectral Response Characteristics

Guizhou Provincial Standard of the People's Republic of China, MS not responding

  • DB52/T 1690-2022 Emergency response level of power grid in rainfall-induced geological disaster area

RU-GOST R, MS not responding

  • GOST R 25645.162-1995 Anthropogenic low-frequence wave influence on the Earth ionosphere and magnetasphere. Spatial-time and spectral responses
  • GOST R 57061-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma mass spectrometry method
  • GOST IEC 60034-26-2015 Rotating electrical machines. Part 26. Effects of unbalanced voltages on the performance of three-phase cage induction motors
  • GOST R 53190-2008 Environmental dynamic test methods for machines, instruments and other technical articles. Shock tests with shock response spectrum synthesis
  • GOST R IEC 60904-8-2013 State system for ensuring the uniformity of measurements. Photovoltaic devices. Part 8. Measurement of spectral response of a photovoltaic device
  • GOST R 57060-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method
  • GOST R 56219-2014 Water. Determination of 62 elements by inductively coupled plasma mass spectrometry (ICP-MS) method

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, MS not responding

  • JEDEC JEP78-1969 Relative Spectral Response Curves for Semiconductor Infrared Detectors

Association Francaise de Normalisation, MS not responding

  • FD CEN/TR 13445-101:2015 Récipient sous pression non soumis à la flamme - Partie 101 : exemple d'application
  • FD V03-157*FD CEN/TR 16468:2013 Food analysis - Determination of pesticide residues by GC-MS - Retention times, mass spectrometric parameters and detector response information
  • FD CEN/TR 16468:2013 Analyse des produits alimentaires - Détermination des résidus de pesticides par CG-SM - Temps de rétention, paramètres de spectrométrie de masse et information sur la réponse des détecteurs
  • NF C57-328*NF EN 60904-8:2014 Photovoltaic devices - Part 8 : measurement of spectral response of a photovoltaic (PV) device
  • NF EN 60904-8:2014 Dispositifs photovoltaïques - Partie 8 : mesure de la réponse spectrale d'un dispositif photovoltaïque (PV)
  • NF EN 60068-2-81:2004 Essais d'environnement - Partie 2-81 : essais - Essai Ei : chocs - Synthèse du spectre de réponse au choc
  • NF T90-163*NF EN ISO 17294-1:2007 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1 : general guidelines
  • NF EN ISO 12846:2012 Qualité de l'eau - Dosage de mercure - Méthode par spectrométrie d'absorption atomique (SAA) avec et sans enrichissement
  • NF C20-781*NF EN 60068-2-81:2004 Environmental testing - Part 2-81 : tests - Test Ei : shock - Shock response spectrum synthesis
  • NF ISO 11843-3:2003 Capacité de détection - Partie 3 : méthodologie pour déterminer la valeur critique d'une variable de réponse lorsque aucun étalonnage n'est utilisé
  • NF T90-122/A1*NF EN ISO 16588/A1:2005 Water quality - Determination of six complexing agents - Gas chromatographic method
  • NF T90-164:2005 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2 : determination of 62 elements.
  • NF EN IEC 60904-7:2019 Dispositifs photovoltaïques - Partie 7 : calcul de la correction de désadaptation des réponses spectrales dans les mesures de dispositifs photovoltaïques
  • NF M60-200-8:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 8 : fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment.
  • NF EN ISO 17294-1:2007 Qualité de l'eau - Application de la spectrométrie de masse avec plasma à couplage inductif (ICP-MS) - Partie 1 : lignes directrices générales

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., MS not responding

  • ASHRAE CH-06-5-1-2006 Control with Building Mass - Part 1: Thermal Response Model
  • ASHRAE 4661-2003 Void Fraction Effects on Heat and Mass Transfer Coefficients in Aspen Pads of Various Thickness
  • ASHRAE 4842-2006 VAV Airflow Sensor Response in Relation to “Poor” Upstream Duct Geometry ((RP-1137))

Danish Standards Foundation, MS not responding

  • DS/CEN/TR 16468:2013 Food analysis - Determination of pesticide residues by GC-MS - Retention times, mass spectrometric parameters and detector response information
  • DS/EN 60904-8:1999 Photovoltaic devices - Part 8: Measurement of spectral response of a photovoltaic (PV) device
  • DS/EN 60068-2-81:2004 Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis
  • DS/EN 60034-26:2007 Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors
  • DS/ISO 11843-3:2003 Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
  • DS/EN ISO 17294-1:2007 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guideline
  • DS/ISO 22818:2021 Textiles – Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS)

International Electrotechnical Commission (IEC), MS not responding

  • IEC 60904-8:1998 Photovoltaic devices - Part 8: Measurement of spectral response of a photovoltaic (PV) device
  • IEC TR 60892:1987 Effects of unbalanced voltages on the performance of three-phase cage induction motors
  • IEC 60904-8:2014 Photovoltaic devices - Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device
  • IEC 60068-2-81:2003 Environmental testing - Part 2-81: Tests; Test Ei: Shock; Shock response spectrum synthesis
  • IEC TS 60034-26:2002 Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase induction motors
  • IEC 60034-26:2006 Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase induction motors
  • IEC 60904-8-1:2017 Photovoltaic devices - Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices
  • IEC TS 60034-26/COR1:2002 Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase induction motors
  • IEC 60034-26:2006/COR1:2014 Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase induction motors; Corrigendum 1

German Institute for Standardization, MS not responding

  • DIN EN 60904-8:1998 Photovoltaic devices - Part 8: Measurement of spectral response of a photovoltaic (PV) device (IEC 60904-8:1998); German version EN 60904-8:1998
  • DIN EN ISO 17294-1:2022-07 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO/DIS 17294-1:2022); German and English version prEN ISO 17294-1:2022 / Note: Date of issue 2022-06-17*Intended as replacement for DIN ...
  • DIN EN ISO 15061:2001 Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001); German version EN ISO 15061:2001
  • DIN EN 60068-2-81:2004-07 Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis (IEC 60068-2-81:2003); German version EN 60068-2-81:2003
  • DIN EN ISO 17294-1:2007 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004); English version of DIN EN ISO 17294-1:2007-02
  • DIN EN ISO 16588:2004 Water quality - Determination of six complexing agents - Gas-chromatographic method (ISO 16588:2002); German version EN ISO 16588:2003
  • DIN EN ISO 17294-2:2005 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of 62 elements (ISO 17294-2:2003); German version EN ISO 17294-2:2004
  • DIN 25482-4:1995 Limit of detection and limit of decision for nuclear radiation measurements - Part 4: Counting alphaspectrometric measurements, neglecting the influence of sample treatment and equipment used
  • DIN EN ISO 17294-1:2007-02 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004); German version EN ISO 17294-1:2006 / Note: To be replaced by DIN EN ISO 17294-1 (2022-07).
  • DIN EN 60904-8:2015 Photovoltaic devices - Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device (IEC 60904-8:2014); German version EN 60904-8:2014

British Standards Institution (BSI), MS not responding

  • BS ISO 18431-4:2007 Mechanical vibration and shock - Signal processing - Shock-response spectrum analysis
  • BS EN 60904-8-1:2017 Photovoltaic devices - Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices
  • BS ISO 17294-1:2004 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - General guidelines
  • BS EN ISO 17294-1:2004 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - General guidelines
  • BS EN 60068-2-81:2003 Environmental testing - Test methods - Test Ei - Shock - Shock response spectrum synthesis
  • BS DD 256:2002 Assessment of the potential for metallic materials to affect adversely the quality of water intended for human consumption. Specification
  • BS ISO 17723-1:2019 PPE ensembles for firefighters undertaking hazardous materials response activities - Gas-tight, vapour-protective ensembles for emergency response teams ("type 1")
  • BS ISO 17294-2:2003 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Determination of 62 elements
  • BS ISO 11929-8:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment
  • BS ISO 20859:2005 Cinematography - Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film
  • BS ISO 11929-3:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment
  • BS EN ISO 17294-2:2003 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Determination of 62 elements
  • BS EN ISO 22032:2007 Water quality. Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge. Method using extraction and gas chromatography/mass spectrometry
  • BS EN 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating. Spectral responsivity, incidence angle and module operating temperature measurements

API - American Petroleum Institute, MS not responding

  • API PUBL 4398-1985 Oil Spill Response Options for Minimizing Adverse Ecological Impacts (Withdrawn)
  • API PUBL 4547-1992 Hazard Response Modeling Uncertainty (a Quantitative Method) Volume III Components of Uncertainty in Hazardous Gas Dispersion Models
  • API PUBL 4546-1992 Hazard Response Modeling Uncertainty (A Quantitative Method) Volume II Evaluation of Commonly Used Hazardous Gas Dispersion Models
  • API PUBL 4545-1992 Hazard Response Modeling Uncertainty (A Quantitative Method) Volume I User's Guide for Software for Evaluating Hazardous Gas Dispersion Models

Indonesia Standards, MS not responding

  • SNI 04-6205.8-2000 Photovoltaic devices - Part 8: Guidance for spectral measurement of spectral response of a photovoltaic device

CENELEC - European Committee for Electrotechnical Standardization, MS not responding

  • EN 60904-8:1998 Photovoltaic Devices Part 8: Measurement of Spectral Response of a Photovoltaic (PV) Device

Standard Association of Australia (SAA), MS not responding

European Telecommunications Standards Institute (ETSI), MS not responding

  • ETSI TR 103 155-2013 Speech and multimedia Transmission Quality (STQ); Frequency responses of different Mouth simulators and Head And Torso Simulators (HATS) (V1.1.1)

ETSI - European Telecommunications Standards Institute, MS not responding

  • TR 103 155-2013 Speech and multimedia Transmission Quality (STQ); Frequency responses of different Mouth simulators and Head And Torso Simulators (HATS) (V1.1.1)

European Committee for Electrotechnical Standardization(CENELEC), MS not responding

  • EN 60904-8:2014 Photovoltaic devices - Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device
  • EN 60904-8-1:2017 Photovoltaic devices - Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices

AENOR, MS not responding

  • UNE-EN 60904-8:2015 Photovoltaic devices - Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device
  • UNE-EN 60068-2-81:2004 Environmental testing -- Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis
  • UNE-EN 60034-26:2008 Rotating electrical machines -- Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

Professional Standard - Environmental Protection, MS not responding

  • HJ 1227-2021 Water quality—Emergency determination of volatile organic compounds —Portable headspace/gas chromatography-mass
  • HJ 1223-2021 Ambient air—Emergency determination of volatile organic compounds— Portable gas chromatography-mass spectrometry

Institute of Electrical and Electronics Engineers (IEEE), MS not responding

  • SMPTE ST 2065-2:2020 ST 2065-2:2020 - SMPTE Standard - Academy Printing Density (APD) — Spectral Responsivities, Reference Measurement Device and Spectral Calculation
  • SMPTE ST 2065-2:2012 ST 2065-2:2012 - SMPTE Standard - Academy Printing Density (APD) — Spectral Responsivities, Reference Measurement Device and Spectral Calculation
  • ST 2065-2:2012 ST 2065-2:2012 - SMPTE Standard - Academy Printing Density (APD) — Spectral Responsivities, Reference Measurement Device and Spectral Calculation
  • ST 2065-2:2020 ST 2065-2:2020 - SMPTE Standard - Academy Printing Density (APD) — Spectral Responsivities, Reference Measurement Device and Spectral Calculation
  • SMPTE RP 109:1994 RP 109:1994 - SMPTE Recommended Practice - Spectral Response of Photographic Audio Reproducers for 8-mm Type S Motion-Picture Film

Taiwan Provincial Standard of the People's Republic of China, MS not responding

  • CNS 13059.8-2002 Photovoltaic devices Part 8:Measurement of spectral response of aphotovoltaic (PV) device
  • CNS 13059-8-2002 Photovoltaic devices Part 8:Measurement of spectral response of aphotovoltaic (PV) device

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, MS not responding

  • GB/T 29716.4-2018 Mechanical vibration and shock—Signal processing—Part4:Shock-response spectrum analysis

Illuminating Engineering Society of North America, MS not responding

KR-KS, MS not responding

  • KS B ISO 18431-4-2017 Mechanical vibration and shock — Signal processing — Part 4: Shock-response spectrum analysis
  • KS B ISO 18431-4-2022 Mechanical vibration and shock — Signal processing — Part 4: Shock-response spectrum analysis
  • KS C IEC 60068-2-81-2020 Environmental testing — Part 2-81: Tests — Test Ei: Shock —Shock response spectrum synthesis
  • KS I ISO 17294-2014 Water quality — Application of inductively coupled plasma mass spectrometry(ICP-MS)
  • KS I ISO 17294-1-2010 Water quality-Application of inductively coupled plasma mass spectrometry(ICP-MS)-Part 1:General guidelines
  • KS I ISO 17294-2-2010 Water quality-Application of inductively coupled plasma mass spectrometry(ICP-MS)-Part 2:Determination of 62 elements

International Organization for Standardization (ISO), MS not responding

  • ISO 6774:1981 Cinematography; Spectral response of photographic sound reproducers for 8 mm Type S motion-picture films; Specifications
  • ISO 17294-1:2004 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines
  • ISO 11929-8:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 8: Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment
  • ISO 17294-2:2003 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of 62 elements
  • ISO 20859:2005 Cinematography - Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film
  • IWA 3-2005 Image safety - Reducing the incidence of undesirable biomedical effects caused by visual image sequences
  • ISO/FDIS 17294-1:2023 Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines
  • ISO/DIS 17294-1 Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines

Professional Standard - Commodity Inspection, MS not responding

  • SN/T 2257-2009 Determination of perfluorooctanoic acid(PFOA)in Teflon materials and sticky pan coatings.Gas chromotagraphy-mass spectrometry(GC-MS)method

Lithuanian Standards Office , MS not responding

  • LST EN 60904-8-2001 Photovoltaic devices. Part 8: Measurement of spectral response of a photovoltaic (PV) device (IEC 60904-8:1998)
  • LST EN 60068-2-81-2004 Environmental testing. Part 2-81: Tests - Test Ei: Shock. Shock response spectrum synthesis (IEC 60068-2-81:2003)
  • LST EN 60034-26-2007 Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors (IEC 60034-26:2006)

ES-UNE, MS not responding

  • UNE-EN 60904-8-1:2018 Photovoltaic devices - Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices

ZA-SANS, MS not responding

  • SANS 60034-26:2006 Rotating electrical machines Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

GB-REG, MS not responding

  • REG NASA-LLIS-0343--1994 Lessons Learned - Mars Observer Inappropriate Fault Protection Response Following Contingency Mode Entry due to a Postulated Propulsion Subsystem Breach

IMO - International Maritime Organization, MS not responding

  • I556E-2002 Protocol on Preparedness@ Response and Co-operation to Pollution Incidents by Hazardous and Noxious Substances@ 2000

ESDU - Engineering Sciences Data Unit, MS not responding

  • ESDU 05008-2007 Cyclic stress-strain response of type 316 austenitic stainless steels during low-cycle fatigue at temperatures between -269 and 800 degrees C (-452 and 1472 degrees F).

Engineering Equipment and Materials Users Association (EEMUA), MS not responding

  • EEMUA PUB NO 218-2010 Quality requirements for the manufacture and supply of duplex stainless steels (Edition 1)

国家质量监督检验检疫总局, MS not responding

  • SN/T 2257-2015 Determination of perfluorooctanoic acid (PFOA) in polytetrafluoroethylene materials and non-stick coatings by gas chromatography-mass spectrometry

未注明发布机构, MS not responding

  • BS ISO 11483-3:2003 Capability of detection — Part 3 : Methodology for determination of the critical value for the response variable when no calibration data are used
  • BS EN 60034-26:2006(2014) Rotating electrical machines — Part 26 : Effects of unbalanced voltages on the performance of three - phase cage induction motors
  • BS EN ISO 17294-1:2006(2008) Water quality — Application of inductively coupled plasma mass spectrometry (ICP - MS) — Part 1 : General guidelines

Inner Mongolia Provincial Standard of the People's Republic of China, MS not responding

  • DB15/T 2149-2021 Gas Chromatography-Mass Spectrometry Detection Method of Quorum Sensing Signal Molecules in Gram-negative Bacteria

Hainan Provincial Standard of the People's Republic of China, MS not responding

  • DB46/T 557-2021 Detection of Non-biodegradable Components in Single-Use Plastic Products by Infrared Spectroscopy and Pyrolysis-Gas Chromatography/Mass Spectrometry

International Maritime Organization (IMO), MS not responding

  • IMO I556E-2002 Protocol on Preparedness, Response and Co-operation to Pollution Incidents by Hazardous and Noxious Substances, 2000

Professional Standard - Forestry, MS not responding

  • LY/T 2151-2013 Method for determination of holocellulose and acid-insoluble lignin in wood.Near infrared spectroscopy

AT-ON, MS not responding

  • ONORM S 2103-1989 Principles for the separated collection of hazardous wastes in small quantities, non-reactiv-empurity and nonparticipating substances in the composting process

YU-JUS, MS not responding

  • JUS N.R8.172-1982 Cores for inductors and transformers for telecommunications. Specialized measuring methods. ontribution of the adjusting device to the ?ore instability

ES-AENOR, MS not responding

ANSI - American National Standards Institute, MS not responding

  • N14.27-1986 Truckload Quantities of Radioactive Materials - Carrier and Shipper Responsibilities and Emergency Response Procedures for Highway Transportation Accidents (INMM)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved