ZH
RU
ES
Density of film material
Density of film material, Total:499 items.
In the international standard classification, Density of film material involves: Packaging materials and accessories, Sacks. Bags, Rubber and plastics products, Equipment for the chemical industry, Paints and varnishes, Photography, Structures of buildings, Document imaging applications, Aerospace electric equipment and systems, Plastics, Printed circuits and boards, RUBBER AND PLASTICS INDUSTRIES, Protection against fire, Insulating materials, Protection of and in buildings, Soil quality. Pedology, Refractories, Waxes, bituminous materials and other petroleum products, Non-destructive testing, Testing of metals, Materials for aerospace construction, Elements of buildings, Protective equipment, Optical equipment, Packaging and distribution of goods in general, Aircraft and space vehicles in general, Integrated circuits. Microelectronics, Construction materials, Welding, brazing and soldering, Sterilization and disinfection, Earthworks. Excavations. Foundation construction. Underground works, Water quality, Materials and articles in contact with foodstuffs, Leather technology, Wood, sawlogs and sawn timber, Wood-based panels, Ceramics, Seals, glands, Sports equipment and facilities, Equipment for the rubber and plastics industries, Insulating fluids, Pulps, Iron and steel products, Pipeline components and pipelines, Powder metallurgy, Semiconductor devices, Electromechanical components for electronic and telecommunications equipment, Adhesives, Road vehicle systems, Road engineering, Inorganic chemicals, Cutting tools, Measurement of volume, mass, density, viscosity, Products of the textile industry, Paper and board, Textile fibres, Reinforced plastics, Electricity. Magnetism. Electrical and magnetic measurements, Rubber, Shipbuilding and marine structures in general, Petroleum products in general, Cans. Tins. Tubes, Optics and optical measurements.
German Institute for Standardization, Density of film material
- DIN 55530:2011 Films for packaging - Barrier materials made of low density polyethylene (PE-LD) films and recyclates
- DIN 55530:1987 Plastic films for packaging; barrier materials made of low density polyethylene
- DIN 55530:2011-05 Films for packaging - Barrier materials made of low density polyethylene (PE-LD) films and recyclates
- DIN 53366:2007-10 Testing of plastic films and sheetings - Determination of blocking strength
- DIN SPEC 6124:2019-08 Assessment of the print quality of primary packaging made of plastic films and film composites
- DIN 53366:2007 Testing of plastic films and sheetings - Determination of blocking strength
- DIN 53366:1983 Testing of plastic films and sheetings; determination of blocking strength
- DIN ISO 4593:2019-06 Plastics - Film and sheeting - Determination of thickness by mechanical scanning (ISO 4593:1993)
- DIN EN ISO 8295:2004-10 Plastics - Film and sheeting - Determination of the coefficients of friction (ISO 8295:1995); German version EN ISO 8295:2004
- DIN EN ISO 11502:2019-03 Plastics - Film and sheeting - Determination of blocking resistance (ISO 11502:2018); German version EN ISO 11502:2018
- PAS 1022-2004 Reference procedure for the determination of optical and dielectric material properties and the layer thickness of thin films by ellipsometry
- DIN EN ISO 11501:2004-10 Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995); German version EN ISO 11501:2004
- DIN ISO 8296:2008-03 Plastics - Film and sheeting - Determination of wetting tension (ISO 8296:2003)
- DIN 41850-4:1976 Integrated film circuits; material, methods for judgement of thick film resistor compositions
- DIN 16729:1984 Ethylene copolymer bitumen (ECB) plastic roofing sheeting and plastic sealing sheeting; requirements
- DIN 55543-1:1986 Packaging test; test methods for plastic sacks; determination of the film thickness
- DIN 53370:2006 Testing of plastics films - Determination of the thickness by mechanical scanning
- DIN 53370:1976 Testing of plastic films; determination of the thickness by mechanical feeling
- DIN EN 60674-3-1:2012 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:1998 + A1:2011); German version EN 60674-3-1:1998 + A1:2011
- DIN EN 60674-3-3:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation (IEC 60674-3-3:1992); German version EN 60674-3-3:1998
- DIN EN 60674-3-4 bis 6:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheets 4 to 6: Requirements for polyimide films used for electrical insulation (IEC 60674-3-4 to 6:1993); German version EN 60674-3-4 bis 6:1995
- DIN EN 60674-3-7:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-7:1992); German version EN 60674-3-7:1998
- DIN EN ISO 6383-2:2004-10 Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983); German version EN ISO 6383-2:2004
- DIN 41850-3:1985 Integrated film circuits; methods for the assessment of dielectric pastes
- DIN 30658-1:1998 Materials for the subsequent sealing of joints in underground gas mains - Part 1: Plastic foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing
- DIN 51901:2006-11 Testing of carbonaceous materials - Determination of density by the xylene method - Solid materials
- DIN EN ISO 527-3:2019-02 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018); German version EN ISO 527-3:2018
- DIN EN ISO 15106-1:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method (ISO 15106-1:2003); German version EN ISO 15106-1:2005
- DIN EN 868-5:2019 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
- DIN EN 868-5:2019-03 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods; German version EN 868-5:2018
- DIN 51916:1987 Testing of carbon materials; determination of apparent density after tamping; solid materials
- DIN 51916:2012 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
- DIN 51916:2013-12 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
- DIN 6125:2021 Packaging test - Opaque and/or white pigmented films - Determination of opacity
- DIN 51916:2013 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
- DIN EN ISO 6383-1:2016-05 Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:2015); German version EN ISO 6383-1:2015
- DIN EN ISO 60:2000 Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977); German version EN ISO 60:1999
- DIN 53408:1967 Testing of Plastics; Determination of Solubility Temperature of Polyvinyl Chloride (PVC) in Plasticizers
- DIN 55529:2012-09 Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material
- DIN EN 549:2023-07 Rubber materials for seals and diaphragms for gas appliances and gas equipment; German version EN 549:2019+A1:2023 / Note: This standard is part of the DVGW body of rules.
- DIN EN ISO 15106-1:2005-05 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method (ISO 15106-1:2003); German version EN ISO 15106-1:2005
- DIN 51757:2011-01 Testing of mineral oils and related materials - Determination of density
- DIN 51757:1994 Testing of mineral oils and related materials; determination of density
- DIN 53350:1980 Testing of plastics films and coated textile fabrics, manufactured using plastics; determination of stiffness in bending, method according to Ohlsen
- DIN 55529:2005 Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material
- DIN 55529:2012 Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material
- DIN 41850-2:1985 Film and hybrid integrated circuits; materials, methods for the assessment of conductive pastes
- DIN EN 62047-18:2014-04 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials (IEC 62047-18:2013); German version EN 62047-18:2013
ET-QSAE, Density of film material
Korean Agency for Technology and Standards (KATS), Density of film material
- KS M 3089-2009 Testing method for thickness of plastic film and sheeting
- KS M ISO 8570:2014 Plastics — Films and sheeting — Determination of cold-crack temperature
- KS M ISO 8570-2014(2019) Plastics — Films and sheeting — Determination of cold-crack temperature
- KS M ISO 4592:2007 Plastics－Film and sheeting－Determination of length and width
- KS M ISO 4592-2007(2017) Plastics－Film and sheeting－Determination of length and width
- KS M ISO 4592-2007(2022) Plastics－Film and sheeting－Determination of length and width
- KS M ISO 5989:2002 Photography－Pre－packaged chemicals for the processing of silver halide based photographic materials－Vocabulary
- KS C IEC 61249-5-1-2003(2019)
- KS M ISO 4593-2002(2017) Plastics－Film and sheeting－Determination of thickness by mechanical scanning
- KS T 1317-2014 Test for impact resistance of plastic film
- KS T 1317-1976 Test for impact resistance of plastic film
- KS M 3054-2011 Testing method for tensile properties of plastic films and sheets
- KS M ISO 11502:2014 Plastics — Film and sheeting — Determination of blocking resistance
- KS M ISO 11502-2014(2019) Plastics — Film and sheeting — Determination of blocking resistance
- KS M ISO 8296-2012(2022) Plastics－Film and sheeting－Determination of wetting tension
- KS F 2347-2007 Testing method for density of soil in place by the rubber-ballon method
- KS F 2347-1982 Testing method for density of soil in place by the rubber-ballon method
- KS M 2258-2007(2022) Testing method for effect of heat on thin-film of asphaltic materials
- KS T 1101-2003 Packaging-Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials
- KS T 1101-2013 Packaging ― Regenerated cellulose film, flms made of plastics, aluminium foil,flexible multilayer structures and metallized
- KS D 2715-2006(2011) Tensile specimen of single- and poly-crystal nano/micro thin film materials
- KS M 2258-2007(2017) Testing method for effect of heat on thin-film of asphaltic materials
- KS M 3053-1990(2001) TESTING METHOD FOR STATIC AND KINETIC COEFFICIENTS OF FRICTION OF PLASTIC FILMS AND SHEETS
- KS M 2259-1980 Testing method for rolling thin - film oven of asphalt(Effect of heat and air on moving film of asphalt)
- KS M ISO 11501-2014(2019) Plastics — Film and sheeting — Determination of dimensional change on heating
- KS M ISO 527-3:2011 Plastics-Determination of tensile properties-Part 3:Test conditions for films and sheets
- KS M ISO 527-3:2016 Plastics－Determination of tensile properties－Part 3：Test conditions for films and sheets
- KS C IEC 61249-5-4-2003(2019)
- KS D 2715-2017 Tensile specimen of single- and poly-crystal nano/micro thin film materials
- KS C IEC 60674-3-3-2014(2019) Specification for plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheet 3: Requirements for polycarbonate(PC) films used for electrical insulation
- KS C IEC 60674-3-4-2014(2019) Specification for plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheets 4 to 6: Requirements for polyimide films used for electrical insulation
- KS C IEC 60674-3-4:2014 Specification for plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheets 4 to 6: Requirements for polyimide films used for electrical insulation
- KS C IEC 61234-1:2002 Method of test for the hydrolytic stability of electrical insulating materials－Part 1：Plastic films
- KS C 2324-2003(2018)
- KS M 7055-1973(2002) TESTING METHOD FOR DENSITY OF PULPWOOD AND WOODCHIPS
- KS M 3005-2002(2022) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
- KS M ISO 15106-1:2008 Plastics-Film and sheeting-Determination of water vapour transmission rate-Part 1:Humidity detection sensor method
- KS M ISO 15106-1-2008(2018) Plastics－Film and sheeting－Determination of water vapour transmission rate－Part 1：Humidity detection sensor method
- KS F 2371-2007 Testing method for bulk density of granular insulations
- KS F 2371-1982 Testing method for bulk density of granular insulations
- KS M 3005-2002 Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
- KS C IEC 60648-2014(2019) Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation
- KS M ISO 4591-2007(2022) Plastics－Film and sheeting－Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
- KS L 6529-2003(2008) Test method for bulk density of artificial abrasive microgrits
- KS M ISO 2528:2006 Sheet materials-Determination of water vapour transmission rate-Gravimetric(dish) method
- KS M ISO 2528:2016 Sheet materials－Determination of water vapour transmission rate－Gravimetric(dish) method
- KS M 3053-2002 TESTING METHOD FOR STATIC AND KINETIC COEFFICIENTS OF FRICTION OF PLASTIC FILMS AND SHEETS
- KS M ISO 4591:2007 Plastics-Film and sheeting-Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
- KS M ISO 15105-1-2013(2018) Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure method
- KS M ISO 4591-2007(2017) Plastics－Film and sheeting－Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
- KS M 3029-1980(2001) TEST METHOD FOR TEAR PROPAGATION RESISTANCE OF PLASTIC FILM AND THIN SHEETING BY A SINGLETEAR METHOD
- KS B 8217-2009 Rubber materials for seals and diaphragms for gas appliances and gas equipment
- KS D 0033-2001 Method for determination of density of metal powder sintered materials
- KS D 0033-2001(2021) Method for determination of density of metal powder sintered materials
- KS D 0033-1990 Method for determination of density of metal powder sintered materials
- KS D 0033-1985 Method for determination of density of metal powder sintered materials
Japanese Industrial Standards Committee (JISC), Density of film material
- JIS K 7130:1999 Plastics -- Film and sheeting -- Determination of thickness
- JIS K 3802:1995 Technical terms for membranes and membrane processes
- JIS K 3802:2015 Technical terms for membranes and membrane processes
- JIS K 7130:1992 Testing methods for thickness of plastic film and sheeting
- JIS K 7317:2022 Plastics -- Determination of scratch hardness of specialty films
- JIS K 7125:1999 Plastics -- Film and sheeting -- Determination of the coefficients of friction
- JIS K 6768:1999 Plastics -- Film and sheeting -- Determination of wetting tension
- JIS K 7133:1999 Plastics -- Film and sheeting -- Determination of dimensional change on heating
- JIS K 7376:2021 Test methods for adhesion of optical thin films on plastic substrate
- JIS K 7129-7:2016 Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 7: Calcium corrosion method
- JIS C 2317:1995 Combined flexible materials consisting of polyester films and insulating papers for electrical purposes
- JIS K 7129-5:2016 Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 5: Pressure sensor method
- JIS K 7196:1991 Testing method for softening temperature of thermoplastics film and sheeting by thermomechanical analysis
- JIS K 6930 AMD 1:2009 Reclaimed granulare molding materials of agricultural polyvinyl chloride film (Amendment 1)
- JIS K 7127:1999 Plastics -- Determination of tensile properties -- Part 3: Test conditions for films and sheets
- JIS K 7129-6:2016 Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 6: Atmospheric pressure ionization mass spectrometer method
- JIS Z 2505:1989 Method for determination of density of metal powder sintered materials
Standard Association of Australia （SAA）, Density of film material
- AS/NZS 1580.107.2:1995 Paints and related materials - Methods of test - Determination of wet film thickness from wet film mass
- AS 1580.107.1:2004 Paints and related materials - Methods of test - Determination of wet film thickness from dry film mass
- AS 1580.108.2:2004 Paints and related materials - Methods of test - Dry film thickness - Paint inspection gauge
- AS 1145.3:2001 Determination of tensile properties of plastics materials - Test conditions for films and sheets
- AS/NZS 1580.107.3:1997 Paints and related materials - Methods of test - Determination of wet film thickness by gauge
- IEC 60674-3-3:2023 Plastic films for electrical purposes — Part 3:Specifications for individual materials — Sheet 3: Polycarbonate (PC) films used for electrical insulation
- IEC 60674-3-7:2023 Plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheet 7: Fluoroethylene-propylene (FEP) films used for electrical insulation
- AS/NZS 1580.107.8:1995 Paints and related materials - Methods of test - Application of paint at a nominated spreading rate by determination of wet film mass (brush application)
- AS 1774.2:2001 Refractories and refractory materials - Physical test methods - Determination of bulk density of granular materials
- AS 1774.6:2001(R2013)
- AS 1774.2:2001(R2013)
- AS/NZS 1580.602.2:1995 Paints and related materials - Methods of test - Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
ES-AENOR, Density of film material
CO-ICONTEC, Density of film material
PL-PKN, Density of film material
- PN C89090-1992 Plastics sheeting. Thickness determination
- PN C89055-1986 Plastics sheeting Test metods of the resistance to Iow temperatur?
- PN C89046-1992 Plastics. Determination of apparent density of rigid cellular materials
RU-GOST R, Density of film material
- GOST 31993-2013 Paint materials. Determination of film thickness
- GOST ISO 8840-2014 Refractory materials. Determination of bulk density of granular materials (grain density)
- GOST 12.4.118-1982 Occupational labour safety standards. Polimerous film materials and synthetic leather as the means of protection arms. The method of determination of resistance to puncture
- GOST R 57432-2017 Packaging. Films of the biodegradable material. General specifications
- GOST 11035.1-1993 Plastics. Determinations of apparent density of moulding materials that can be poured from a specified funnel
- GOST 12.4.167-1985 Occupational safety standards system. Filmy polymeric materials for hand protection means. Method of determination of abrasion resistance
- GOST 12.4.143-1984 Occupational safety standards system. Film polymer materials for hand protection means. Methods for determination of permeability factor of organic solvents
- GOST R 52740-2007 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
- GOST 31974-2012 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
- GOST 31975-2013 Paints materials. Method for determination of gloss of non-metallic paint films at 20°, 60°and 85°
- GOST R 51351-1999 PVC artificial leather and film materials. Norms of deleterious substances isolated from finished products in storage
- GOST R 56654-2015 Polymer composites. Method for determination of density of sandwich core materials
- GOST R 56300-2014 Refractories and refractory raw materials. Methods of true density determination
- GOST R 8.829-2013 State system for ensuring the uniformity of measurements. Method for the determination of optical density (transmittance coefficient) and haze of polymeric plates and films
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Density of film material
- GB/T 6673-2001 Plastics film and sheeting determination of length and width
- GB/T 41792-2022 Plastics—Film and sheeting—Determination of cold-crack temperature
- GB/T 30412-2013 Determination of water vapour transmission rate for plastic film and sheeting.Humidity detection sensor method
- GB/T 28765-2012 Packaging material.Test methods for organic vapor transmission rate for plastic film,sheet and package
- GB/T 20875.1-2007 Method of test for the hydrolytic stability of electrical insulating materials Part 1: Plastic films
- GB/T 20220-2006 Plastic.Film and sheeting.Determination of average thickness of a sample,and average thickness and yield of a roll,by gravimetric techniques (gravimetric thickness)
- GB/T 10421-2002 Sintered metal friction materials--Determination of density
- GB/T 2679.2-2015 Sheet materials.Determination of water vapour trasmission rate.Gravimetric (Dish) method
- GB/T 5163-1985 Permeable sintered metal materials--Determination of density
- GB/T 13477.2-2002 Test method for building sealants Part 2: Determination of density
- GB/T 10671-1989 Test method for specific optical density of smoke generated by solid materials
- GB/T 10671-2023 Specific optical density test method for smoke production from solid materials
- GB/T 10671-2008 Test method for specific optical density of smoke generated by solid materials
- GB/T 7155.2-1987 Determination of density of thermoplastic pipes and fittings--Part 2: Determination of density of polypropylene pipes and fittings
International Organization for Standardization (ISO), Density of film material
- ISO 4592:1979 Plastics — Film and sheeting — Determination of length and width
- ISO 4592:1992 Plastics; film and sheeting; determination of length and width
- ISO 15989:2004 Plastics - Film and sheeting - Measurement of water-contact angle of corona-treated films
- ISO 6200:1979 Micrographics — Density of silver-gelatin type films
- ISO 12992:1995 Plastics - Vertical flame spread determination for film and sheet
- ISO 11502:2018 Plastics — Film and sheeting — Determination of blocking resistance
- ISO 527-3:1995 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
- ISO 527-3:1995/cor 1:1998 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets; Technical Corrigendum 1
- ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
- ISO 527-3:2018 Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
- ISO 15106-1:2003 Plastics; Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method
- ISO 3369:1975 Impermeable sintered metal materials and hardmetals; Determination of density
- ISO 2528:1995 Sheet materials - Determination of water vapour transmission rate - Gravimetric (dish) method
- ISO 4591:1979 Plastics — Film and sheeting — Determination of average thickness of a sample and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
- ISO 60:1977 Plastics; Determination of apparent density of material that can be poured from a specified funnel
- ISO 2528:2017 Sheet materials - Determination of water vapour transmission rate (WVTR) - Gravimetric (dish) method
- ISO 15106-7:2015 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 7: Calcium corrosion method
American Society for Testing and Materials (ASTM), Density of film material
- ASTM D1004-07 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
- ASTM D5295-00 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
- ASTM D5295/D5295M-14 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
- ASTM D6583-00 Standard Test Method for Porosity of Paint Film
- ASTM D1746-97 Standard Test Method for Transparency of Plastic Sheeting
- ASTM D1746-03 Standard Test Method for Transparency of Plastic Sheeting
- ASTM D1746-23 Standard Test Method for Transparency of Plastic Sheeting
- ASTM D5683-95(2005) Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
- ASTM D5683/D5683M-95(2011)e1 Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
- ASTM D1004-94a Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
- ASTM D1004-13 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
- ASTM D1004-09 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
- ASTM D4635-16 Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
- ASTM D6988-13 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
- ASTM D6988-21 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
- ASTM D6988-08 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
- ASTM D1004-03 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
- ASTM D1004-94a(2003) Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
- ASTM D6988-07 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
- ASTM D6988-03 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
- ASTM D4321-99 Standard Test Method for Package Yield of Plastic Film
- ASTM D4321-15 Standard Test Method for Package Yield of Plastic Film
- ASTM D1593-09 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
- ASTM F1513-99(2011) Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications
- ASTM D1593-13 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
- ASTM D2457-03 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM D5491-98 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
- ASTM D5491-03 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
- ASTM D4635-08 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
- ASTM D2395-17 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
- ASTM D2395-14 Standard Test Methods for Density and Specific Gravity 40;Relative Density41; of Wood and Wood-Based Materials
- ASTM D2395-14e1 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
- ASTM F1315-00 Standard Test Method for Density of a Sheet Gasket Material
- ASTM F1315-00(2006) Standard Test Method for Density of a Sheet Gasket Material
- ASTM F1315-00(2014) Standard Test Method for Density of a Sheet Gasket Material
- ASTM D5683-95(1999)e1 Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
- ASTM D5683/D5683M-95(2022) Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
- ASTM D1922-23 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
- ASTM D1434-23 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
- ASTM D1004-21 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
- ASTM D1004-08 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
- ASTM D1389-06 Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
- ASTM B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
- ASTM B114-07(2013) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
- ASTM D3981-95 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
- ASTM D3981-08 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
- ASTM D3981-09 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
- ASTM D7105-06(2013) Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
- ASTM D1754-97 Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
- ASTM D1754-97(2002) Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
- ASTM F2378-05(2023) Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
- ASTM D1480-21 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
- ASTM D1480-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
- ASTM D3981-03 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
- ASTM C271/C271M-16(2022)e1 Standard Test Method for Density of Sandwich Core Materials
- ASTM D3981-09a Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
- ASTM D3981-09a(2016) Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
- ASTM D6583-04 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
- ASTM D6583-04(2010) Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
- ASTM D5491-08 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
- ASTM D5491-08(2022) Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
- ASTM D1754/D1754M-09(2014) Standard Test Method for Effects of Heat and Air on Asphaltic Materials &40;Thin-Film Oven Test&41;
- ASTM D6343-14 Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
- ASTM D5491-08(2014) Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
- ASTM C271/C271M-16 Standard Test Method for Density of Sandwich Core Materials
- ASTM D1481-17 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
- ASTM D952-95 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
- ASTM D952-02 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
- ASTM D8013-16(2021) Standard Guide for Establishing a Recycle Program for Roof Coverings, Roofing Membrane, and Shingle Materials
KR-KS, Density of film material
- KS M ISO 15987-2017 Plastics - Film and sheeting - Biaxially oriented polyamide(nylon) films
- KS M ISO 6383-1-2016 Plastics - Film and sheeting - Determination of tear resistance - Part 1 : Trouser tear method
Association Francaise de Normalisation, Density of film material
- NF T30-125:1974 Paints.determination of wet film thickness.
- NF T30-122:1974 Paints. Determination of dry film thickness. Dial gauge method.
- F00-003:1987 Railway material in general. Density of materials.
- NF EN 60674-3-7:1998 Spécification pour les films en matière plastique - Partie 3 : spécifications pour matériaux particuliers - Feuille 7 : prescriptions pour les films de fluoroéthylène-propylène (FEP), utilisés dans l'isolation électrique.
- NF EN ISO 6383-1:2016 Plastiques - Film et feuille - Détermination de la résistance au déchirement - Partie 1 : méthode de déchirement pantalon
- NF DTU 59.1 P1-2:2013 Travaux de bâtiment - Revêtements de peinture en feuil mince, semi-épais, ou épais - Partie 1-2 : critères généraux de choix des matériaux
- NF EN ISO 6383-2:2004 Plastiques - Film et feuille - Détermination de la résistance au déchirement - Partie 2 : méthode Elmendorf
- NF T30-123:1974 Paints. Determination of dry film thickness. Microscope methods.
- NF EN IEC 60674-3-2:2019 Spécification pour les films en matière plastique à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 2 : exigences pour les films de polyéthylène-téréphtalate (PET), à orientation biaxe équilibrée, utili...
- NF T30-121:1974 Paints. Determination of dry film thickness. Micrometer method.
- NF P94-061-2:1996 Sols : reconnaissance et essais - Détermination de la masse volumique d'un matériau en place - Partie 2 : méthode au densitomètre à membrane.
- NF EN ISO 16138:2006 Robinetterie industrielle - Robinets à membrane en matériaux thermoplastiques
- NF EN 60674-3-3:1998 Spécification pour les films en matière plastique à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 3 : prescriptions pour les films de polycarbonate (PC), utilisés dans l'isolation électrique.
- NF G92-003:1989 Cartables et sacs d'écoliers - Méthodes d'essais - Détermination de la résistance à la rupture des assemblages par couture de matériaux souples en feuilles (film).
- NF C26-235-1*NF EN 61234-1:1994 Method of test for the hydrolic stability of electrical insulating materials. Part 1 : plastic films.
- NF T54-803-2:2007 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2 : reinforced membranes of nominal thickness equal to or greater than 1,5 mm.
- NF T54-803-2*NF EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2 : reinforced membranes of nominal thickness equal to or greater than 1,5 mm
- FD S54-080:1996 Articles de puériculture - Matériaux textiles, supports textiles revêtus d'élastomère ou de matières plastiques et films plastiques - Mesurage de la vitesse de propagation de la flamme sur des éprouvettes orientées à 45 degrés.
- NF EN ISO 12625-3:2014 Papier en tissue et produits tissue - Partie 3 : détermination de l'épaisseur, de l'épaisseur moyenne d'une feuille en liasse et de la masse volumique moyenne et de la main
- NF B40-309:1986 Refractories - Determination of the density,the open porosity and the total porosity of materials in grain form
- NF D36-205:1995 Rubber materials for seals and diaphragms for gas appliances and gas equipment.
- NF H34-083*NF EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
- NF P98-284-1:1992 Tests relating to pavements. Waterproofing materials for structures. Determination of cracking stregth. Part 1 : tests on adhesive thin film.
- NF T51-034-3*NF EN ISO 527-3:2018 Plastics - Determination of tensile properties - Part 3 : test conditions for films and sheets
- NF C26-251:1980 Méthodes d'essai des matières isolantes - Méthode de mesure des coefficients de frottement des films et feuilles de matière plastique utilisés comme isolants électriques.
- NF T54-197:2014 Plastique - Feuilles et films à base de polymères pour l'industrie - Méthode conventionnelle pour l'évaluation de la soudabilité de feuilles ou films thermoplastiques assemblés par le procédé de soudage haute fréquence - Évaluation de la qu...
- NF T54-142-1*NF EN ISO 15106-1:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1 : humidity detection sensor method
- NF S98-051-5*NF EN 868-5:2018 Packaging for terminally sterilized medical devices - Part 5 : sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
- NF EN ISO 11833-2:2006 Plastiques - Feuilles en poly(chlorure de vinyle) non plastifié - Types, dimensions et caractéristiques - Partie 2 : feuilles et films d'épaisseur inférieure à 1 mm
- NF EN 60674-3-8/A1:2017 Films plastiques à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 8 : films de polynaphtalate d'éthylène (PEN) à orientation bi-axiale équilibrée, utilisés dans l'isolation électrique
- AC T51-808:2012 Plastiques - Évaluation expérimentale de l'oxobiodégradabilité de matériaux polyoléfiniques sous forme de films - Méthodologie et exigences
- NF T54-803-1*NF EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1 : homogenous membranes of nominal thickness equal to or greater than 0,75 mm
- NF C26-145-3-8/A1*NF EN 60674-3-8/A1:2017 Plastic films for electrical purposes - Part 3 : specifications for individual materials - Sheet 8 : balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
- NF EN 60674-3-8:2012 Films plastiques à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 8 : films de polynaphtalate d'éthylène (PEN), à orientation bi-axiale équilibrée, utilisés dans l'isolation électrique
- NF C28-901-13*NF EN IEC 60404-13:2018 Magnetic materials - Part 13 : methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
- NF T54-141:1984 Plastics. Film and sheeting. Determination of tear resistance. Part 2 : elmendorf method.
- NF T54-803-1:2006 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1 : homogenous membranes of nominal thickness equal or greater than 0,75 mm.
- NF C26-145-3-2*NF EN 60674-3-2:1998 Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : requirements for balanced biaxially oriented polyethylene terephtalate (PET) films used for electrical insulation.
- NF T76-410*NF EN ISO 22637:2019 Adhesives - Test of adhesive for floor covering - Determination of the electrical resistance of adhesive films and composites
- NF EN ISO 22637:2019 Adhésifs - Essai des adhésifs pour revêtements de sol - Détermination de la résistance électrique des composites et films d'adhésif
- NF EN 868-5:2018 Emballages des dispositifs médicaux stérilisés au stade terminal - Partie 5 : Sachets et gaines scellables constitués d'une face matière poreuse et d'une face film plastique - Exigences et méthodes d'essai
RO-ASRO, Density of film material
FI-SFS, Density of film material
United States Navy, Density of film material
- NAVY PPP-C-795 D NOTICE 2-2004 CUSHIONING MATERIAL, PACKAGING (FLEXIBLE CLOSED CELL PLASTIC FILM, FOR LONG DISTRIBUTION CYCLES) [Use In Lieu Of: NAVY PPP-C-00795]
- NAVY PPP-C-795 D-1994 CUSHIONING MATERIAL, PACKAGING (FLEXIBLE CLOSED CELL PLASTIC FILM, FOR LONG DISTRIBUTION CYCLES)
(U.S.) Ford Automotive Standards, Density of film material
Group Standards of the People's Republic of China, Density of film material
YU-JUS, Density of film material
- JUS Z.S2.240-1983 Road markings. Reguirements for thinfilm material and application
- JUS N.A5.140-1990 Testing of insuiating materials for electrical purposes. Method of test for coefficients ofstatic and ki- nematic friction of plastic films and sheeting
- JUS B.D8.311-1984 Refractories. Methods of physical testing. Determ inati on of the bulk density of granular refractory materials and raws
British Standards Institution (BSI), Density of film material
- BS EN ISO 8295:2004 Plastics. Film and sheeting. Determination of the coefficients of friction
- BS EN IEC 60674-3-3:2023 Plastic films for electrical purposes. Specifications for individual materials. Sheet 3. Polycarbonate (PC) films used for electrical insulation
- BS EN ISO 11501:2004 Plastics. Film and sheeting. Determination of dimensional change on heating. Determination of dimensional change on heating of film and sheeting
- BS EN 60674-3-3:1995 Specification for plastic films for electrical purposes - Specifications for individual materials - Requirements for polycarbonate (PC) films used for electrical insulation
- BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
- BS EN 60674-3-3:1998 Specification for plastic films for electrical purposes. Specifications for individual materials. Requirements for polycarbonate (PC) films used for electrical insulation
- BS EN IEC 60674-3-7:2023 Plastic films for electrical purposes. Specifications for individual materials. Sheet 7. Fluoroethylene-propylene (FEP) films used for electrical insulation
- BS EN 60674-3-7:1995 Specification for plastic films for electrical purposes - Specifications for individual materials - Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation
- BS EN 60674-3-7:1998 Specification for plastic films for electrical purposes. Specifications for individual materials. Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation
- BS EN IEC 60674-3-4:2022 Tracked Changes. Plastic films for electrical purposes. Specifications for individual materials. Sheets 4: Polyimide films used for electrical insulation
- BS ISO 18903:2002 Imaging materials. Films and paper. Determination of dimensional change
- BS EN ISO 527-3:1996 Plastics - Determination of tensile properties - Test conditions for films and sheets
- 21/30395144 DC BS ISO 8840. Refractory materials. Determination of bulk density of granular materials (grain density)
- BS EN IEC 60674-3-1:2021 Tracked Changes. Plastic films for electrical purposes. Specifications for individual materials. Sheet 1. Biaxially oriented polypropylene (PP) film for capacitors
- BS ISO 15105-2:2003 Plastics - Film and sheeting - Determination of gas-transmission rate - Equal-pressure method
- BS EN ISO 11502:2018 Tracked Changes. Plastics. Film and sheeting. Determination of blocking resistance
- BS EN 868-5:1999 Packaging materials and systems for medical devices which are to be sterilized - Heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods
- BS EN 868-5:2018 Packaging materials and systems for medical devices which are to be sterilized - Heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods
- BS EN ISO 15106-1:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Humidity detection sensor method
- 21/30434810 DC BS EN IEC 62899-202-8. Printed electronics - Part 202-8. Materials. Conductive film. Measurement for difference in resistance with printing direction of conductive film fabricated with wire shaped materials
- BS CWA 14247:2001 Water treatment membranes - Influence of materials on water intended for human consumption - Test method
- BS EN 60674-3-8:2011+A1:2017 Plastic films for electrical purposes - Specifications for individual materials. Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
- 22/30451524 DC BS EN IEC 60674-3-7. Plastic films for electrical purposes - Part 3-7. Specifications for individual materials. Fluoroethylene-propylene (FEP) films used for electrical insulation
- BS ISO 15106-7:2015 Plastics. Film and sheeting. Determination of water vapour transmission rate. Calcium corrosion method
- BS 5961:1980 Method for determination of coefficients of friction of plastic film and sheeting for use as electrical insulation
- BS EN ISO 6383-2:2004 Plastics. Film and sheeting. Determination of tear resistance. Elmendorf method
- 19/30390165 DC BS EN 60674-3-1. Plastic films for electrical purposes. Part 3. Specifications for individual materials. Sheet 1. Biaxially oriented polypropylene (PP) film for capacitors
- 22/30451642 DC BS EN 60674-3-3. Specification for plastic films for electrical purposes - Part 3. Specifications for individual materials. Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation
- BS EN ISO 527-3:2018 Tracked Changes. Plastics. Determination of tensile properties. Test conditions for films and sheets
- BS EN 61158-3-2:2014+A1:2019 Tracked Changes. Packaging for terminally sterilized medical devices. Sealable pouches and reels of porous materials and plastic film construction. Requirements and test methods
- 20/30419219 DC BS EN 60674-3-4. Specification for plastic films for electrical purposes. Part 3. Specifications for individual materials. Sheets 4 to 6: Requirements for polyimide films used for electrical insulation
- BS EN 62047-12:2011 Semiconductor devices. Micro-electromechanical devices. Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures
- BS EN 62047-18:2013 Semiconductor devices. Micro-electromechanical devices. Bend testing methods of thin film materials
- BS EN 62047-2:2006 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
- BS EN 61234-1:1994 Method of test for hydrolytic stability of electrical insulating materials. Method of test for hydrolytic stability of electrical insulating materials. Plastic films
- BS EN 15836-1:2010 Plastics.Plasticized poly(vinyl
chloride) (PVC-P) membranes
for inground swimming pools.
Part 1: Homogenous membranes of
nominal thickness equal to or greater than
0,75 mm
- BS EN 62047-6:2010 Semiconductor devices - Micro-electromechanical devices - Axial fatigue testing methods of thin film materials
- BS EN ISO 6383-1:2015 Tracked Changes. Plastics. Film and sheeting. Determination of tear resistance. Trouser tear method
- BS EN IEC 60674-3-2:2019 Tracked Changes. Specification for plastic films for electrical purposes. Specifications for individual materials. Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation
- BS ISO 2528:2017 Sheet materials. Determination of water vapour transmission rate (WVTR). Gravimetric (dish) method
- BS EN 60454-3-14:2002 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Polytetrafluoroethylene film tapes with pressure-sensitive adhesive.. Sheet 14: Polytetrafluoroethylene film tapes with pressure-sens...
- BS EN 60454-3-1:1998 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. PVC film tapes with pressure-sensitive adhesive
- BS 3900-D6:1982 Methods of test for paints. Optical tests on paint films. Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate, using polyester film
ES-UNE, Density of film material
- UNE-EN ISO 11502:2019 Plastics - Film and sheeting - Determination of blocking resistance (ISO 11502:2018)
- UNE-EN IEC 60674-3-1:2021 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (Endorsed by Asociación Española de Normalización in November of 2021.)
- UNE-EN IEC 60674-3-4:2022 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4: Polyimide films used for electrical insulation (Endorsed by Asociación Española de Normalización in October of 2022.)
- UNE-EN 61234-1:1993 METHOD OF TEST FOR THE HYDROSTATIC STABILITY OF ELECTRICAL INSULATING MATERIALS. PART 1: PLASTIC FILMS. (Endorsed by AENOR in November of 1995.)
- UNE-EN ISO 527-3:2019 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018)
- UNE-EN 868-5:2019 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
- UNE-EN 60674-3-8:2011 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation (Endorsed by AENOR in November of 2011.)
- UNE-EN ISO 6383-1:2016 Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:2015)
- UNE-EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (Endorsed by Asociación Española de Normalización in December of 2018.)
- UNE-EN 549:2020 Rubber materials for seals and diaphragms for gas appliances and gas equipment
CZ-CSN, Density of film material
- CSN 64 6014-1983 Heat shrinkable film from low density olyethylene for packaging echnical requirements
- CSN ISO 5018:1994 Refractory materials.Determination of true density
- CSN 72 7018-1970 Determination of apparent density of raw ceramic materials
- CSN 66 6616-1983 Photography materials on a clearing base. Determination o? minimum density, maximum density and fog density.
- CSN 66 6610-1982 Photography. Determination of transmission density of colour materials
- CSN 65 7070-1965 Method of test for effect oí heat and air on asphaltic materials (thin film oven test)
- CSN 66 6612-1983 Conditions for determination of reflection density of black-and-white photographic materials
AENOR, Density of film material
- UNE 21376:1986 METHOD OF TEST FOR COEFFICIENTS OF FRICTION OF PLASTIC FILM AND SHEETING FOR USE AS ELECTRICAL INSULATION.
- UNE-EN 60674-3-1:1999/A1:2012 Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
- UNE-EN 60674-3-3:1999 SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 3: REQUIREMENTS FOR POLYCARBONATE (PC) FILMS USED FOR ELECTRICAL INSULATION.
- UNE-EN 60674-3-1:1999 PLASTIC FILMS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 1: BIAXIALLY ORIENTED POLYPROPYLENE (PP) FILM FOR CAPACITORS.
- UNE-EN 60674-3-7:1999 SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 7: REQUIREMENTS FOR FLUOROETHYLENE-PROPYLENE (FEP) FILMS USED FOR ELECTRICAL INSULATION.
- UNE-EN 60674-3-4 A 6:1997 SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEETS 4 TO 6: REQUIREMENTS FOR POLYIMIDE FILMS USED FOR ELECTRICAL INSULATION.
- UNE-EN 13418:2013 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
- UNE-ISO 4591:2010 Plastics -- Film and sheeting -- Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
- UNE-EN 868-5:2009 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
- UNE-EN 549:1996 RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT.
- UNE-EN 60674-3-2:1999 SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 2: REQUIREMENTS FOR BALNCED BIAXIALLY ORIENTED POLYETHYLENE TEREPHTHALATE (PET) FILMS USED FOR ELECTRICAL INSULATION.
- UNE-EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
Society of Automotive Engineers (SAE), Density of film material
- SAE AMS-R-83283-1998 Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type
- SAE AMS-R-83283A-2014 Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type
- SAE AMS3529A-1998 Plastic Sheet and Film, Vinyl Copolymers Unplasticized
- SAE AMS3529B-2015 Plastic Sheet and Film, Vinyl Copolymers Unplasticized
- SAE AMS3898/2B-1994 Interleaf Carrier Material, Composite Tape Polyethylene Film, 0.0018 inch (0.046 mm), Unperforated
- SAE AMS3898/5B-1994 Interleaf Carrier Material, Composite Tape Polyethylene Coated Paper, Perforated 0.0035 inch (0.089 mm)
American National Standards Institute （ANSI), Density of film material
- ANSI A108.13-2005 Installation of Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile and Dimension Stone Installations
- ANSI/UL 746F-2012 Standard for Safety for Polymeric Materials - Flexible Dielectric Film Materials for Use in Printed-Wiring Boards and Flexible Materials Interconnect Constructions
IPC - Association Connecting Electronics Industries, Density of film material
- IPC TM-650 2.6.21B-2011 Service Temperature of Metal-Clad Flexible Laminate@ Cover Material and Adhesive Bonding Films
SG-SPRING SG, Density of film material
- SS 323-E2-2013 Methods of test for flexible plastic packaging materials.Part E2: Standard test method for determining gas permeability characteristics of plastic film and sheeting
- SS 5 Pt.B1-1985 Methods Of Test For Paints, Varnishes And Related Materials Part B1 : Determination Of Film Thickness
- SS 323-C5-2013 Methods of test for flexible plastic packaging materials.Part C5: Standard test method for static and kinetic coefficients of friction of plastic film and sheeting
国家市场监督管理总局、中国国家标准化管理委员会, Density of film material
- GB/T 39935-2021 Plastics—Film and sheeting—Determination of blocking resistance
- GB/T 13477.2-2018 Test method for building sealants－Part 2：Determination of density
European Committee for Electrotechnical Standardization（CENELEC）, Density of film material
- EN IEC 60674-3-3:2023 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Polycarbonate (PC) films used for electrical insulation
- EN IEC 60674-3-7:2023 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Fluoroethylene-propylene (FEP) films used for electrical insulation
- EN IEC 60674-3-1:2021 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
- EN 60674-3-2:1998 Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Requirements for Balanced Biaxially Oriented Polyethylene Terephthalate (PET) Films Used for Electrical Insulation
- EN 60674-3-7:1998 Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 7: Requirements for Fluoroethylene-Propylene (FEP) Films Used for Electrical Insulation
- EN 60674-3-8:2011 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
- EN 61234-1:1994 Method of Test for Hydrolytic Stability of Electrical Insulating Materials Part 1: Plastic Films
- EN 62047-18:2013 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials
SE-SIS, Density of film material
Malaysia Standards, Density of film material
- MS 1478-1999 Specification for low-density polyethylene films for general use and packaging applications
Danish Standards Foundation, Density of film material
- DS/EN ISO 11501:2004 Plastics - Film and sheeting - Determination of dimensional change on heating
- DS/EN IEC 60674-3-1:2021 Plastic films for electrical purposes – Part 3: Specifications for individual materials – Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
- DS/ISO 6383/1:1985 Plastics — Film and sheeting — Determination of tear resistance Part 1: Trouser tear method
- DS/EN 60674-3-1/A1:2012 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
- DS/EN 60674-3-1:1999 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
- DS/EN ISO 6383-1:2004 Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method
- DS/EN 60674-3-3:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation
- DS/EN 60674-3-4 til 6:1996 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation
- DS/EN 60674-3-7:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation
- DS/EN 61234-1:1998 Method of test for the hydrolytic stability of electrical insulating materials - Part 1: Plastic films
- DS/EN 13418:2013 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
- DS/EN ISO 527-3/AC:2001 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
- DS/EN ISO 527-3/AC:1999 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
- DS/EN ISO 527-3:1996 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
- DS/EN ISO 15106-1:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method
- DS/EN 868-5:2009 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
- DS/EN 23369:1994 Impermeable sintered metal materials and hardmetals-Determination of density
- DS/EN 60674-3-8:2011 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
- DS/EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
- DS/EN 62047-2:2007 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
- DS/EN 62047-18:2013 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials
BE-NBN, Density of film material
U.S. Military Regulations and Norms, Density of film material
- ARMY A-A-3129 A-2003 CUSHIONING MATERIAL, FLEXIBLE OPEN CELL PLASTIC FILM (FOR PACKAGING APPLICATIONS)
Professional Standard - Light Industry, Density of film material
- QB/T 1010-1999 Determination of True Density of Ceramic Material Pigments
- QB/T 1010-2015 Test method for true density of ceramic material and pigment
Association of German Mechanical Engineers, Density of film material
Lithuanian Standards Office , Density of film material
- LST ISO 5018:1998 Refractory materials. Determination of true density
- LST EN 13418-2004+A1-2009 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
- LST EN 60674-3-1-2001 Plastic films for electrical purposes. Part 3: Specifications for individual materials. Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:1998)
- LST EN 60674-3-1-2001/A1-2012 Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:1998/A1:2011)
- LST EN 60674-3-3-2001 Specification for plastic films for electrical purposes. Part 3: Specifications for individual materials. Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation (IEC 60674-3-3:1992)
- LST EN 60674-3-7-2001 Specification for plastic films for electrical purposes. Part 3: Specifications for individual materials. Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-7:1992)
- LST EN 868-5-2009 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
- LST EN 60674-3-4 iki 6-2001 Specification for plastic films for electrical purposes. Part 3: Specifications for individual materials. Sheets 4 to 6: Requirements for polyimide films used for electrical insulation (IEC 60674-3-4 to 6:1993)
- LST EN 61234-1-2001 Method of test for the hydrolytic stability of electrical insulating materials. Part 1: Plastic films (IEC 61234-1:1994)
- LST EN 60674-3-8-2011 Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation (IEC 60674-3-8:2011)
CEN - European Committee for Standardization, Density of film material
- EN ISO 527-3:2018 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
- EN ISO 6383-1:2004 Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method
International Electrotechnical Commission (IEC), Density of film material
- IEC 60674-3-4:1993 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation
- IEC 61234-1:1994 Method of test for the hydrolytic stability of electrical insulating materials; part 1: plastic films
- IEC TR 60648:1979 Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation
Professional Standard - Commodity Inspection, Density of film material
- SN/T 3180-2012 Food contact materials.Polymers.Determination of residual solvent in plastic film.Gas chromatography
GM North America, Density of film material
International Federation of Trucks and Engines, Density of film material
PT-IPQ, Density of film material
ZA-SANS, Density of film material
- SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
- SANS 5904:1979 Bulk density of refractory materials (mercury displacement method)
Underwriters Laboratories (UL), Density of film material
- UL 746F BULLETIN-2009 UL Standards for Safety POLYMERIC MATERIALS - FLEXIBLE DIELECTRIC FILM MATERIALS FOR USE IN PRINTED-WIRING BOARDS AND FLEXIBLE MATERIALS INTERCONNECT CONSTRUCTIONS
- UL 746F BULLETIN-2014 UL Standard for Safety Polymeric Materials – Flexible Dielectric Film Materials for Use in Printed-Wiring Boards and Flexible Materials Interconnect Constructions
- UL 746F BULLETIN-2011 UL Standard for Safety POLYMERIC MATERIALS - FLEXIBLE DIELECTRIC FILM MATERIALS FOR USE IN PRINTED-WIRING BOARDS AND FLEXIBLE MATERIALS INTERCONNECT CONSTRUCTIONS
- UL 746F BULLETIN-2012 UL Standard for Safety Polymeric Materials – Flexible Dielectric Film Materials for Use in Printed-Wiring Boards and Flexible Materials Interconnect Constructions
- UL 746F BULLETIN-2007 UL Standards for Safety POLYMERIC MATERIALS - FLEXIBLE DIELECTRIC FILM MATERIALS FOR USE IN PRINTED-WIRING BOARDS AND FLEXIBLE MATERIALS INTERCONNECT CONSTRUCTIONS
- UL 746F BULLETIN-2018 UL Standard for Safety Polymeric Materials – Flexible Dielectric Film Materials for Use in Printed-Wiring Boards and Flexible Materials Interconnect Constructions
- UL 746F-2006 UL Standards for Safety POLYMERIC MATERIALS - FLEXIBLE DIELECTRIC FILM MATERIALS FOR USE IN PRINTED-WIRING BOARDS AND FLEXIBLE MATERIALS INTERCONNECT CONSTRUCTIONS
- UL 746F BULLETIN-2006 UL Standards for Safety POLYMERIC MATERIALS - FLEXIBLE DIELECTRIC FILM MATERIALS FOR USE IN PRINTED-WIRING BOARDS AND FLEXIBLE MATERIALS INTERCONNECT CONSTRUCTIONS
- UL 746F BULLETIN-2013 UL Standard for Safety Polymeric Materials – Flexible Dielectric Film Materials for Use in Printed-Wiring Boards and Flexible Materials Interconnect Constructions
- UL SUBJECT 746F-2005 OUTLINE OF INVESTIGATION FOR POLYMERIC MATERIALS – FLEXIBLE DIELECTRIC FILM MATERIALS FOR USE IN PRINTED-WIRING BOARDS AND FLEXIBLE MATERIALS INTERCONNECT CONSTRUCTIONS (Issue Number: 3)
- UL SUBJECT 746F-2004 Outline of Investigation for Polymeric Materials - Flexible Dielectric Film Materials for Use in Printed-Wiring Boards and Flexible Materials Interconnect Constructions (Issue Number: 1)
TR-TSE, Density of film material
- TS 1975-1975 FLEXIBLE CELLULAR MATERIALS - DETERMINATION OF APPARENT DENSITY
- TS 1976-1975 FLEXIBLE CELLULAR MATERIALS - DETERMINATION OF APPARENT DENSITY
IN-BIS, Density of film material
GM Daewoo, Density of film material
The American Road & Transportation Builders Association, Density of film material
- AASHTO T 179-2005 Standard Method of Test for Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test)
- AASHTO T 179-2005(R2009) Standard Method of Test for Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test)
未注明发布机构, Density of film material
VE-FONDONORMA, Density of film material
European Committee for Standardization (CEN), Density of film material
- EN 13392:2001 Textiles - Monofilaments - Determination of linear density
- EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
- EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Density of film material
CENELEC - European Committee for Electrotechnical Standardization, Density of film material
- EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity@ density and stacking factor of electrical steel strip and sheet
AASHTO - American Association of State Highway and Transportation Officials, Density of film material
- T 179-2005 Standard Method of Test for Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test)
CH-SNV, Density of film material
Defense Logistics Agency, Density of film material
- DLA MIL-C-18312 F VALID NOTICE 1-2007 CAPACITORS, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR
- DLA MIL-C-18312 F-2001 CAPACITORS, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR
IT-UNI, Density of film material