ZH
RU
ES

Three-point flexural modulus of elasticity

Three-point flexural modulus of elasticity, Total:111 items.

In the international standard classification, Three-point flexural modulus of elasticity involves: Wood-based panels, Paper and board, Plastics, Wood, sawlogs and sawn timber, Adhesives, Insulating materials, Raw materials for rubber and plastics, Construction materials, Ceramics, Cellular materials, Glass, Mechanical testing.

RO-ASRO, Three-point flexural modulus of elasticity

STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
STAS 5855-1990 CHIPBOARDS AND WOOD FIBREBOARDS Strength and elasticity modulus deter- minatiou at slalic bending

GM North America, Three-point flexural modulus of elasticity

GMP.EEBC+PBT.006-2002 Copolyester Elastomer - 300 MPa Flexural Modulus Revision B
GM GMP.EEBC+ PBT.002-1993 Copolyester Elastomer - 700 MPa Flexural Modulus
GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
GMP.TES.014-2005 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D34, 240 MPa Flexural Modulus, Interior, Integrally Colored Revision B
GM GMN7305-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D40, 160 MPa Flexural Modulus, Interior, Integrally Colored
GM GMP.TES.012-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A89, 100 MPa Flexural Modulus, Interior, Integrally Colored
GM GMP.TES.014-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A93, 240 MPa Flexural Modulus, Interior, Integrally Colored
GM GMP.EEBC.004-2013 Thermoplastic Polyester Elastomer 47 Type D Hardness, 90 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.EEBC.015-2013 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 400 MPa Flexural Modulus (Issue 3; Do Not Use on New Programs; No Replacement)
GM GMP.EEBC.002-2014 Thermoplastic Polyester Elastomer - 42 Type D Durometer Hardness, 60 MPa Flexural Modulus (Issue 3; Do Not Use on New Programs; Replaced by GMW17187)
GM GMP.EEBC.020-2013 Thermoplastic Elastomer - Poly(ether ester) Block Copolymer, Shore D 45, 300 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMN7305-2013 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D40, 180 MPa Flexural Modulus, Interior, Integrally Colored (Issue 3; Do Not Use on New Programs; No Replacement)

British Standards Institution (BSI), Three-point flexural modulus of elasticity

BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DD ENV 1966-1996 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
BS EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
BS EN 1966:2002 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method
BS ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of thick ceramic coatings
13/30255941 DC BS ISO 13061-4. Physical and mechanical properties of wood. Test methods for small clear specimen. Part 4. Determination of modulus of elasticity in static bending
BS ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of ceramic tube and rings

European Committee for Standardization (CEN), Three-point flexural modulus of elasticity

EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
EN 1966:2002 Structural adhesives Characterisation of a surface by measuring adhesion by means of the three point bending method Supersedes ENV 1966: 1995

Danish Standards Foundation, Three-point flexural modulus of elasticity

DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength

German Institute for Standardization, Three-point flexural modulus of elasticity

DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; English version of DIN EN 1966:2009-07

Lithuanian Standards Office , Three-point flexural modulus of elasticity

LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength

Indonesia Standards, Three-point flexural modulus of elasticity

SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength

AENOR, Three-point flexural modulus of elasticity

UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity

Association Francaise de Normalisation, Three-point flexural modulus of elasticity

NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.

未注明发布机构, Three-point flexural modulus of elasticity

BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength

CZ-CSN, Three-point flexural modulus of elasticity

CSN 49 0116-1976 Sawn timbor Testing ní' iikkIuIus of elasticity in bending
CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
CSN 49 0131-1982 Sawn timber. Determination of modulus of elasticity in static bending
CSN 64 0614-1981 Testing of plnstios. Determination f modulus of elasticity from tensile, ompresion and flexural tests

American Society for Testing and Materials (ASTM), Three-point flexural modulus of elasticity

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM C120/C120M-15 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C580-18(2023) Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM C580-18 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

AT-ON, Three-point flexural modulus of elasticity

ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength

Korean Agency for Technology and Standards (KATS), Three-point flexural modulus of elasticity

KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method

International Organization for Standardization (ISO), Three-point flexural modulus of elasticity

ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 11093-7:2011 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method
ISO 13061-4:2014 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 4: Determination of modulus of elasticity in static bending
ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of thick ceramic coatings
ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of ceramic tube and rings
ISO 13061-4:2014/Amd 1:2017 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 4: Determination of modulus of elasticity in static bending — Amendment 1

BE-NBN, Three-point flexural modulus of elasticity

NBN-EN 310-1994

American National Standards Institute （ANSI), Three-point flexural modulus of elasticity

ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)

ES-AENOR, Three-point flexural modulus of elasticity

YU-JUS, Three-point flexural modulus of elasticity

JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
JUS D.A1.035-1979 Testingofwood. Determination ofmodulus ofelasticitv in static ben?ing
JUS U.J6.236-1983 Testing of plastics and damped laminated systems.Bending vibration test;determination of complex modulus of elasticity

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three-point flexural modulus of elasticity

GB/T 10700-2006 Test methods for elastic moduli of fine ceramics (advanced ceramics,advanced technical ceramics).Bending method
GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration
GB/T 22906.7-2008 Testing of cores.Part 7:Determination of flexural modulus by the three-point method

Professional Standard - Machinery, Three-point flexural modulus of elasticity

JB/T 6544-1993 Drawing and bending elastic modulus of plastics - Test method

KR-KS, Three-point flexural modulus of elasticity

KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method

Japanese Industrial Standards Committee (JISC), Three-point flexural modulus of elasticity

JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity

Malaysia Standards, Three-point flexural modulus of elasticity

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

WRC - Welding Research Council, Three-point flexural modulus of elasticity

BULLETIN 180-1973 ELASTIC-PLASTIC BENDING OF A CONSTRAINED CIRCULAR PERFORATED PLATE UNDER UNIFORM PRESSURE (TRIANGULAR PENETRATION PATTERN)
BULLETIN 299-1984 ENGINEERING ASPECTS OF CTOD FRACTURE TOUGHNESS TESTING ; THREE-DIMENSIONAL ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS OF THREE-POINT BEND SPECIMEN ; FAILURE PREDICTION OF NOTCHED PRESSURE VESSELS USING T

American Welding Society (AWS), Three-point flexural modulus of elasticity

WRC 180:1973 Elastic-Plastic Bending of a Constrained Circular Perforated Plate Under Uniform Pressure (Triangular Penetration Pattern)
WRC 299:1984 Part 1: Engineering Aspects of CTOD Fracture Toughness Testing; Part 2: Three-Dimensional Elastic-Plastic Finite Element Analysis of Three-Point Bend Specimen; Part 3: Failure Prediction of Notched Pressure Vessels Using The CTOD Approach

工业和信息化部, Three-point flexural modulus of elasticity

JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method

Standard Association of Australia （SAA）, Three-point flexural modulus of elasticity

AS/NZS 4266.5/AMD 1:2006 Amendment No.1 to AS/NZS 4266.5-2004 Reconstituted wood-based panels--Methods of test Part 5: Modulus of elasticity in bending and bending strength
AS 1774.31.1:2000(R2013)

NZ-SNZ, Three-point flexural modulus of elasticity

AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)

RU-GOST R, Three-point flexural modulus of elasticity

GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST 9900-2013 Glass and glass products. Methods for determination of mechanical properties. Determination of elasticity modulus at cross static bending

ZA-SANS, Three-point flexural modulus of elasticity

SANS 6083:2004 Modulus of elasticity and modulus of rupture in static bending of solid timber and glued laminated timber in structural sizes

VN-TCVN, Three-point flexural modulus of elasticity

TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength

IN-BIS, Three-point flexural modulus of elasticity

IS 2380 Pt.4-1977

GM Daewoo, Three-point flexural modulus of elasticity

GMKOREA EDS-T-7510-2006 TESTING OF PLASTICS DETERMINATION OF THE MODULUS OF ELASTICITY BY TENSILE, COMPRESSION AND FLEXURAL TEST (VERSION: 4)

(U.S.) Ford Automotive Standards, Three-point flexural modulus of elasticity

FORD ESB-M2D348-A3-2004 POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***