ZH
RU
ES

Three point bending sample

Three point bending sample, Total:196 items.

In the international standard classification, Three point bending sample involves: Materials for aerospace construction, Glass, Plastics, Farming and forestry, Reinforced plastics, Paper and board, Adhesives, Rubber and plastics products, Inorganic chemicals, Refractories, Raw materials for rubber and plastics, Waxes, bituminous materials and other petroleum products, Products of the textile industry, Construction materials, Paints and varnishes, Medical equipment, Valves, Pipeline components and pipelines, Ceramics, Road vehicle systems, Products of the chemical industry, Insulating materials, Road engineering, Testing of metals, Soil quality. Pedology, Wood, sawlogs and sawn timber.

British Standards Institution (BSI), Three point bending sample

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS EN ISO 899-2:2003+A1:2015 Plastics. Determination of creep behaviour. Flexural creep by three-point loading
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
14/30288711 DC BS EN ISO 1288-3. Glass in building. Determination of the bending strength of glass. Part 3. Test with specimen supported at two points (four-point bending)
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DD ENV 1966-1996 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS ISO 5628:2019 Tracked Changes. Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
23/30449747 DC BS EN ISO 899-2. Plastics. Determination of creep behaviour - Part 2. Flexural creep by three-point loading
BS EN 1966:2002 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method
BS EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)

FI-SFS, Three point bending sample

SFS-ISO 6602 E:1986 This standard is approved in English

German Institute for Standardization, Three point bending sample

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 53442:1990-09 Flexural fatique testing of plastics using flat specimens
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003); German version EN ISO 899-2:2003
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN ISO 899-2:2015-06 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003 + Amd.1:2015); German version EN ISO 899-2:2003 + A1:2015 / Note: To be replaced by DIN EN ISO 899-2 (2023-03) (in preparation).
DIN EN 1966:2009-07 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; German version EN 1966:2009
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN SPEC 1026:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010
DIN EN ISO 899-2:2023-03 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO/DIS 899-2:2023); German and English version prEN ISO 899-2:2023 / Note: Date of issue 2023-02-03*Intended as replacement for DIN EN ISO 899-2 (2015-06).
DIN EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; English version of DIN EN 1966:2009-07
DIN EN ISO 899-2:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003 + Amd.1:2015); German version EN ISO 899-2:2003 + A1:2015

RU-GOST R, Three point bending sample

GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading
GOST R 56810-2015 Polymer composites. Test method for flexural flat samples

European Committee for Standardization (CEN), Three point bending sample

EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
EN ISO 899-2:1996 Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading ISO 899-2: 1993
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN ISO 899-2:2003 Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading ISO 899-2: 2003
prEN ISO 899-2 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO/DIS 899-2:2023)
EN ISO 899-2:2003/A1:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)
EN 1966:2002 Structural adhesives Characterisation of a surface by measuring adhesion by means of the three point bending method Supersedes ENV 1966: 1995
DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three point bending sample

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass—Three-point bending method
GB/T 33099-2016 Test methods of stiffness for dipped reinforcing material—Three-point bending

American Society for Testing and Materials (ASTM), Three point bending sample

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM F2606-08 Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM F2606-08(2014) Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM F2606-08(2021) Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM D7196-23 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM G39-99 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM G39-99(2021) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C1609/C1609M-19 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-10 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C947-03 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C947-99 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM C947-03(2016) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
ASTM C947-03(2023) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D8295-19 Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
ASTM C651-91(2005)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-91(2010)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-20 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-11 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-13 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-15 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

AENOR, Three point bending sample

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE-EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
UNE-EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003)
UNE-EN ISO 899-2:2003/A1:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)

American National Standards Institute （ANSI), Three point bending sample

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)

Association Francaise de Normalisation, Three point bending sample

NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF EN 1288-3:2000 Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 3 : essais avec éprouvettes supportées en deux points (flexion quatre points)
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
NF T30-010:1992 Paints and varnishes. Evaluation of adhesion or cohesion. Three point bending method.
NF EN ISO 899-2:2003 Plastiques - Détermination du comportement au fluage - Partie 2 : fluage en flexion par mise en charge en trois points
NF EN 1966:2009 Adhésifs structuraux - Caractérisation d'une surface par mesure de l'adhérence au moyen de la méthode de la flexion en trois points
NF T51-120-2:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 2 : essai en flexion sur éprouvettes encastrées.
NF T76-143*NF EN 1966:2009 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method.
NF T51-103-2/A1*NF EN ISO 899-2/A1:2015 Plastics - Determination of creep behaviour - Part 2 : flexural creep by three-point loading - Amendment 1
NF EN ISO 22088-3:2006 Plastiques - Détermination de la fissuration sous contrainte dans un environnement donné (ESC) - Partie 3 : méthode de l'éprouvette courbée
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
NF EN ISO 899-2/A1:2015 Plastiques - Détermination du comportement au fluage - Partie 2 : fluage en flexion par mise en charge en trois points - Amendement 1
NF P98-261-1:2001 Test relating to pavements - Determination of the fatigue resistance of bituminous mixtures - Part 1 : two points flexural fatigue test with constant displacement on trapezoidal isocel specimens.
NF T51-103-2*NF EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2 : flexural creep by three-point loading
NF EN 658-5:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à température ambiante - Partie 5 : détermination de la résistance au cisaillement interlaminaire par essai de flexion sur appuis rapprochés (trois points)

Danish Standards Foundation, Three point bending sample

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
DS/EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading
DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

Lithuanian Standards Office , Three point bending sample

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN 1966-2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
LST EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003)
LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

International Organization for Standardization (ISO), Three point bending sample

ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
ISO/DIS 899-2:1968 Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
ISO 899-2:2003/Amd 1:2015 Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1
ISO 13061-10:2017 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 10: Determination of impact bending strength

AT-ON, Three point bending sample

ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.
ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)

Korean Agency for Technology and Standards (KATS), Three point bending sample

KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 899-2-2016(2021) Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method
KS M ISO 12986-1-2004(2009) Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Three point bending sample

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

国家市场监督管理总局、中国国家标准化管理委员会, Three point bending sample

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）

Japanese Industrial Standards Committee (JISC), Three point bending sample

JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)
JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three point bending sample

GB/T 11546.2-2022 Plastics—Determination of creep behaviour—Part 2:Flexural creep by three-point loading
GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method

UY-UNIT, Three point bending sample

UNIT 64-1948

未注明发布机构, Three point bending sample

BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DIN EN 1966:2003 Structural adhesives — Characterization of a surface by measuring adhesion by means of the three point bending method

Professional Standard - Medicine, Three point bending sample

YY/T 0858-2011 Standard guide for three-piont bending of balloon expandable vascular stents and stent systems

Malaysia Standards, Three point bending sample

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

KR-KS, Three point bending sample

KS M ISO 899-2-2016 Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method

Professional Standard - Agriculture, Three point bending sample

GB 2760-2014增补公告2019年第2号 Announcement on 24 kinds of "three new foods" including Lactobacillus benthus

CEN - European Committee for Standardization, Three point bending sample

DD ENV 1966-1995 Structural Adhesives - Characterization of a Surface by a Measuring Adhesion by Means of the Three Point Bending Method

TH-TISI, Three point bending sample

TIS 2246.2-2005 Plastics.determination of creep behaviour.part 2: flexural creep by three.point loading

Society of Automotive Engineers (SAE), Three point bending sample

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

European Association of Aerospace Industries, Three point bending sample

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1

AGMA - American Gear Manufacturers Association, Three point bending sample

09FTM13-2009 Bending Fatigue@ Impact and Pitting Resistance of Ausform Finished P/M Gears

WRC - Welding Research Council, Three point bending sample

BULLETIN 299-1984 ENGINEERING ASPECTS OF CTOD FRACTURE TOUGHNESS TESTING ; THREE-DIMENSIONAL ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS OF THREE-POINT BEND SPECIMEN ; FAILURE PREDICTION OF NOTCHED PRESSURE VESSELS USING T

The American Road & Transportation Builders Association, Three point bending sample

AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

AASHTO - American Association of State Highway and Transportation Officials, Three point bending sample

T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

Aerospace, Security and Defence Industries Association of Europe (ASD), Three point bending sample

ASD-STAN PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

PL-PKN, Three point bending sample

PN C82055-02-1991 Test methods of pressed carbon products Determination of flexural strength by three-point method

Professional Standard - Commodity Inspection, Three point bending sample

SN/T 3728-2013 Rapid determination of Campylobacter jejuni in food for export.Quantum dots immuno-fluorescence method