ZH
RU
ES
Coating instrument
Coating instrument, Total:484 items.
In the international standard classification, Coating instrument involves: Glass, Optical equipment, Optics and optical measurements, Surface treatment and coating, Paints and varnishes, Inorganic chemicals, Packaging materials and accessories, Vacuum technology, Textile fibres, Non-ferrous metals, Medical equipment, Road vehicle systems, Quality, Dentistry, Road engineering, Laboratory medicine, Equipment for the chemical industry, Industrial automation systems, Linear and angular measurements, Electrical equipment for working in special conditions, Organic chemicals, Domestic, commercial and industrial heating appliances, Products of non-ferrous metals, Mining equipment, Installations in buildings, Iron and steel products, Vocabularies, Leather technology, Insulating materials, Production in the chemical industry, Geology. Meteorology. Hydrology, Company organization and management, Energy and heat transfer engineering in general, Electrical wires and cables, Products of the textile industry, Powder metallurgy, Protection against fire, Protection against crime, Products of the chemical industry, Horology, Paint coating equipment, Analytical chemistry, Air quality, Capacitors, Materials and articles in contact with foodstuffs, Solar energy engineering, Environmental protection, Medical sciences and health care facilities in general, Photography, Rubber and plastics products, Equipment for the metallurgical industry, Printed circuits and boards, Paint coating processes, Water quality, Mechanical testing, Manufacturing processes in the rubber and plastics industries, Electronic components in general, Semiconducting materials, Fasteners for aerospace construction.
Society of Automotive Engineers (SAE), Coating instrument
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Coating instrument
- GB/T 18915.2-2002 Coated glass--Part2: Low emissivity coated glass
- GB/T 18915.2-2013 Coated glass.Part 2:Low emissivity coated glass
- GB/T 18915.1-2002 Coated glass--Part 1: Solar control coated glass
- GB/T 18915.1-2013 Coated glass.Part 1:solar control coated glass
- GB/T 31860-2015 Magnesium fluoride for coating film use
- GB/T 9800-1988 Chromate conversion coatings on electroplated zinc and cadmium coatings
- GB/T 11164-1999 Vacuum coating plant generic specification
- GB/T 11164-2011 Vacuum coating plant generic specification
- GB/T 26598-2011 Transparent conductive thin film speciation for optical instruments
- GB/T 26332.1-2010 Optics and optical instruments.Optical coatings.Part 1:Definitions
- GB/T 28786-2012 Vacuum technology.Methods of bouding strength measurement for vacuum coating film.Measuring adhesion by tape test
- GB/T 25898-2010(英文版) Instrumented nanoindentation test—Indentation hardness and modulus of thin film
- GB/T 27581-2011 Electromagnetic interference shielding film.Electroless copper plating solution.Method of determining concentration of Ni and Cu
- GB/T 12967.7-2010 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 7: Measurement of abrasion resistance of anodic oxidation coatings by sand falling test apparatus
- GB/T 20506-2006 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
- GB/T 25898-2010 Instrumented nanoindentation test.Indentation hardness and modulus of thin film
- GB/T 12967.1-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 1:Measurement of meat specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
Professional Standard - Machinery, Coating instrument
- JB/T 5474-1991 Optical part coatings - Polarization film
- JB/T 8226.7-1999 Coating for optical element.Beam splitter coating
- JB/T 5588-1991 Optical part coatings - Conducting film
- JB/T 8226.2-1999 Coating for optical element.Double layeranti-reflecting coating by hydrolltic process
- JB/T 8226.1-1999 Coating for optical element.Anti-reflection coating
- JB/T 8226.3-1999 Coating for optical element.Front surface reflecting coating
- JB/T 8226.4-1999 Coating for optical element.Rear surface mirror coating
- JB/T 5589-1991 Optical part coatings - High reflectance film
- JB/T 8226.5-1999 Coating for optical element.Neutral-filter coating
- JB/T 8226.8-1999 Coating for optical element.Edge filter coating
- JB/T 8226.6-1999 Coating for optical element.Narrow bandpass interterence filter coating
- JB/T 6922-2015 Vacuum evaporation coating plant
- JB/T 6922-2004 Vacuum evaporation coating plant
- JB/T 8945-1999 Vacuum sputtering coating plant
- JB/T 8946-1999 Vacuum ion coating plant
- JB/T 8945-2010 Vacuum sputtering coating plant
- JB/T 8946-2010 Vacuum ion coating plant
- JB/T 6922-1993 Vacuum evaporation coating equipment
- JB/T 4167-1999 Membrane type pneumatic measuring instrument
- JB/T 53021-1999 Vacuum coating equipment product quality classification
- JB/T 6179-1992 Optical part coatings - Classification, symbol and marking
- JB/T 7707-1995 Test method for thickness of hard film of ion plating Ball milling method
- JB/T 5579-1991 Technical conditions of vacuum evaporation mirror coating equipment
- JB/T 5575-1991 Technical conditions of vacuum evaporation optical coating equipment
- JB/T 5576-1991 Technical conditions for vacuum evaporation decorative coating equipment
- JB/T 4279.13-1994 Enamelled winding wire test equipment and equipment verification method High-voltage paint film continuity tester
- JB/T 4279.12-1994 Enamelled winding wire test equipment and equipment verification method Low-voltage paint film continuity tester
- JB/T 4279.12-2008 Verification procedure for test equipment of enamelled winding wire.Part 12:Continuity of insulation tester(low voltage method)
- JB/T 4279.13-2008 Verification procedure for test equipment of enamelled winding wire.Part 13:Continuity of insulation tester(high-voltage method)
Association of German Mechanical Engineers, Coating instrument
Professional Standard - Chemical Industry, Coating instrument
- HG/T 4766-2014 Vacuum metalizing coatings
- HG/T 3240~3241-2007 Computer Film Thickness GaugeComputer Hole Film Thickness Gauge
- HG/T 3240-2007 Micro-computer film-thickness tester
- HG/T 3241-2007 Micro-computer thickness tester for inner hole coating
- HG/T 5297～5300-2018 Diffusion composite polyethylene terephthalate (PET) film, high temperature resistant transparent high barrier film, transparent polyethylene terephthalate (PET) hardened film for indium tin oxide (ITO) coating and indium tin Refractive index matching cur
- HG/T 4949~4950-2016 Matte polyethylene terephthalate (PET) hardened films for in-mold decoration (IMD) for clear optics and indium tin oxide (ITO) coatings (2016)
HU-MSZT, Coating instrument
Japanese Industrial Standards Committee (JISC), Coating instrument
- JIS R 3221:2022 Optical coated glass
- JIS G 3318:2005 Prepainted hot-dip zinc -- 5% aluminium alloy-coated steel sheets and coils
- JIS G 3318:2008 Prepainted hot-dip zinc -- 5 % aluminium alloy-coated steel sheet and strip
- JIS G 3318:2012 Prepainted hot-dip zinc -- 5 % aluminium alloy-coated steel sheet and strip
- JIS G 3318:2019 Prepainted hot-dip zinc -- 5 % aluminium alloy-coated steel sheet and strip
- JIS C 2319:1993 Metallized polyester film for capacitors
- JIS G 3312:2005 Prepainted hot-dip zinc-coated steel sheets and coils
- JIS G 3312:2008 Prepainted hot-dip zinc-coated steel sheet and strip
- JIS G 3312:2012 Prepainted hot-dip zinc-coated steel sheet and strip
- JIS G 3318 AMD 1:2013 Prepainted hot-dip zinc -- 5% aluminium alloy-coated steel sheet and strip (Amendment 1)
- JIS G 3312 AMD 1:2013 Prepainted hot-dip zinc-coated steel sheet and strip (Amendment 1)
- JIS G 3322:2005 Prepainted hot-dip 55 % aluminium-zinc alloy-coated steel sheets and coils
- JIS G 3322:2008 Prepainted hot-dip 55 % aluminium -- Zinc alloy-coated steel sheet and strip
- JIS G 3322:2012 Prepainted hot-dip 55 % aluminium-zinc alloy-coated steel sheet and strip
- JIS G 3322 AMD 1:2013 Prepainted hot-dip 55% aluminium -- zinc alloy-coated steel sheet and strip (Amendment 1)
- JIS C 6488:1994 Copper-clad laminates for printed wiring boards -- Glass cloth surfaces, cellulose paper core, epoxy resin
- JIS K 7129:2008 Plastics --Film and sheeting -- Determination of water vapour transmission rate -- Instrumental method
- JIS C 6489:1994 Copper-clad laminates for printed wiring boards -- Glass cloth surfaces, nonwoven glass core, epoxy resin
- JIS K 7129:1992 Testing methods for water vapor transmission rate of plastic film and sheeting (instrument method)
Professional Standard - Building Materials, Coating instrument
German Institute for Standardization, Coating instrument
- DIN 50997:2020 Zinc-aluminium coatings applied by thin film galvanizing of steel - Requirements and testing
- DIN EN ISO 19980:2005 Ophthalmic instruments - Corneal topographers (ISO 19980:2005); English version of DIN EN ISO 19980:2005
- DIN ISO 9211-6:2020 Optics and photonics - Optical coatings - Part 6: Minimum requirements for reflecting coatings (ISO 9211-6:2018)
- DIN EN 1096-2:2012-04 Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings; German version EN 1096-2:2012
- DIN EN 1096-3:2012-04 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings; German version EN 1096-3:2012
- DIN EN ISO 19980:2022-04 Ophthalmic instruments - Corneal topographers (ISO 19980:2021); German version EN ISO 19980:2021
- DIN ISO 9211-7:2020 Optics and photonics - Optical coatings - Part 7: Minimum requirements for neutral beam splitting coatings (ISO 9211-7:2018)
- DIN EN 1096-5:2016 Glass in building - Coated glass - Part 5: Test method and classification for the self-cleaning performances of coated glass surfaces
- DIN EN ISO 19980:2019 Ophthalmic instruments - Corneal topographers (ISO/DIS 19980:2019); German and English version prEN ISO 19980:2019
- DIN 50957:1978 Testing of electrolytes used for electro-deposited metallic coatings; test involving electro-deposition of a coating in the Hull cell, general principles
- DIN 58772:2019-09 Production in optical engineering - Coating rings - General requirements
- DIN EN 1096-5:2016-06 Glass in building - Coated glass - Part 5: Test method and classification for the self-cleaning performances of coated glass surfaces; German version EN 1096-5:2016
- DIN EN ISO 12865:2006 Ophthalmic instruments - Retinoscopes (ISO 12865:2006); English version of DIN EN ISO 12865:2006-10
- DIN EN 1096-4:2018-11 Glass in building - Coated glass - Part 4: Product standard; German version EN 1096-4:2018 / Note: DIN EN 1096-4 (2005-01) remains valid alongside this standard until 2019-02-01.
- DIN EN 1096-1:2012-04 Glass in building - Coated glass - Part 1: Definitions and classification; German version EN 1096-1:2012
- DIN EN ISO 22553-7:2021-11 Paints and varnishes - Electro-deposition coatings - Part 7: Electrical wet-film resistance (ISO 22553-7:2020); German version EN ISO 22553-7:2021
- DIN 50997:2020-08 Zinc-aluminium coatings applied by thin film galvanizing of steel - Requirements and testing
- DIN CEN ISO/TS 19397:2018-05*DIN SPEC 55661:2018-05 Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015); German version CEN ISO/TS 19397:2018
- DIN ISO 9211-1:2020 Optics and photonics - Optical coatings - Part 1: Vocabulary (ISO 9211-1:2018)
- DIN 55662:2009 Paints and varnishes - Coatings for automotive industry - Testing of resistance to pressure-water jetting
- DIN EN 15755-1:2014-10 Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and requirements; German version EN 15755-1:2014
- DIN EN ISO 19490:2017 Dentistry - Sinus membrane elevator (ISO 19490:2017); German version EN ISO 19490:2017
- DIN EN 1096-4:2018 Glass in building - Coated glass - Part 4: Product standard; German version EN 1096-4:2018
- DIN EN 13523-1:2010 Coil coated metals - Test methods - Part 1: Film thickness; German version EN 13523-1:2009
- DIN EN 13523-1:2017 Coil coated metals - Test methods - Part 1: Film thickness; German version EN 13523-1:2017
- DIN CEN/TS 16359:2012 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of knot staining resistance of wood coatings; German version CEN/TS 16359:2012
- DIN EN 14805:2008 Chemicals used for treatment of water intended for human consumption - Sodium chloride for on site electrochlorination using non-membrane technology; English version of DIN EN 14805:2008-09
- DIN EN ISO 19980:2012 Ophthalmic instruments - Corneal topographers (ISO 19980:2012); German version EN ISO 19980:2012
Indonesia Standards, Coating instrument
Professional Standard-Packaging, Coating instrument
KR-KS, Coating instrument
- KS D ISO 4526-2012 Metallic coatings－Electroplated coatings of nickel for engineering purposes
- KS D ISO 4525-2012 Metallic coatings－Electroplated coatings of nickel plus chromium on plastics materials
- KS P ISO 12865-2018 Ophthalmic instruments — Retinoscopes
- KS D ISO 10546-2009 Chemical conversion coatings－Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
机械工业部, Coating instrument
- JB/T 8226.6-1995 Optical parts coating narrow band interference filter film
- JB/T 7502-1994 Technical requirements for surface quality control of parts before ion plating
- JB/T 8227-1995 External reflective film reinforced by anodizing after vacuum aluminum plating on optical parts
- JB/T 8228-1995 Optical parts are coated with titanium dioxide, silicon dioxide and three-layer spectroscopic film (R:T=1:1) using hydrolysis method
AT-ON, Coating instrument
RU-GOST R, Coating instrument
Professional Standard - Textile, Coating instrument
- FZ/T 64002-1993 Metal coated composite flakes
- FZ/T 60009-1993 Determination of Needle-punched Density of Metal Coated Composite Floc
- FZ/T 60011-1993 Determination of Peeling Strength of Metal Coated Composite Flocs
- FZ/T 60010-1993 Determination of breaking strength, elongation at break and build-up strength of metal-coated composite flakes
International Organization for Standardization (ISO), Coating instrument
- ISO 4520:1981 Chromate conversion coatings on electroplated zinc and cadmium coatings
- ISO 19490:2017 Dentistry - Sinus membrane elevator
- ISO 11479-1:2011 Glass in building - Coated glass - Part 1: Physical defects
- ISO 11479-2:2011 Glass in building - Coated glass - Part 2: Colour of façade
- ISO/DIS 9211-1 Optics and photonics — Optical coatings — Part 1: Vocabulary
- ISO/DIS 9211-2 Optics and photonics — Optical coatings — Part 2: Optical properties
- ISO/CD 19397:2023 Determination of the film thickness of coatings using an ultrasonic gage
- ISO 4168:2002 Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits
- ISO 4168:1979 Time measurement instruments; Conditions for carrying out checks on radioluminescent deposits
- ISO 8321-1:1991 Optics and optical instruments; contact lenses; part 1: specification for rigid corneal and scleral contact lenses
- ISO 10216:2010 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
- ISO 10216:1992 Anodized aluminium and aluminium alloys; instrumental determination of image clarity of anodic oxidation coatings; instrumental method
- ISO 10216:2017 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
- IEC TR 63258:2021 Nanotechnologies — A guideline for ellipsometry application to evaluate the thickness of nanoscale films
- IEC/TR 63258:2021 Nanotechnologies — A guideline for ellipsometry application to evaluate the thickness of nanoscale films
- ISO 10216:2010/Cor 1:2011 Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method — Technical Corrigendum 1
- ISO 3868:1976 Metallic and other non-organic coatings; Measurement of coating thicknesses; Fizeau multiple-beam interferometry method
Korean Agency for Technology and Standards (KATS), Coating instrument
- KS D 8350-1994 Chromate conversion coatings on electroplated zinc and cadmium coatings
- KS D 8350-2013 Chromate conversion coatings on electroplated zinc and cadmium coatings
- KS R 0014-2004 General rules of coating films for automobile parts
- KS D 6711-2012 Painted aluminium and aluminium alloy sheets and strips
- KS D 8323-1996(2001) TEST METHODS FOR ZINC SPARYED COATINGS
- KS D 8323-1986 TEST METHODS FOR ZINC SPARYED COATINGS
- KS D 6711-1982 Painted aluminium and aluminium alloy sheets and strips
- KS D 6711-1992 Painted aluminium and aluminium alloy sheets and strips
- KS P 8425-2015 Dentistry — Test methods for determining fluorescence of dental restorative materials
- KS P 8428-2015 General requirements for clinical laboratory automation system performance
- KS P 8429-2015 General requirements for clinical laboratory automation system information
- KS P 8426-2015 Dentistry — Dental handpieces — Anti-suckback test methods for anti-contamination
- KS P 8427-2015 Dentistry — Orthodonticmetallic mini screw — Test methods of torque and multiangularpull-out strength
- KS P 8430-2015 Management and safety requirements for clinical laboratory pre-analytical automation system
- KS P ISO 12865:2018 Ophthalmic instruments — Retinoscopes
- KS D 3520-2020 Prepainted hot-dip zinc-coated steel sheets and coils
- KS P ISO 10343:2002 Ophthalmic instruments－Ophthalmometers
- KS D 3854-2018 Zinc-coated light gauge steels for structure
- KS D ISO 4519:2009 Electrodeposited metallic coatings and related finishes－Sampling procedures for inspection by attributes
- KS B ISO 4168:2005 Timekeeping instruments-Conditions for carrying out checks on radioluminescent deposits
- KS M 3088-1994 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
- KS M 3088-2013 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
- KS D ISO 10216-2012(2017) Anodizing of aluminium and its alloys－Instrumental determination of image clarity of anodic oxidation coatings－Instrumental method
- KS M 3088-2009 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
Danish Standards Foundation, Coating instrument
- DS/EN ISO 19980:2012 Ophthalmic instruments - Corneal topographers
- DS/ISO 19980:2021 Ophthalmic instruments – Corneal topographers
- DS/EN 1096-3:2012 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
- DS/EN ISO 19980:2021 Ophthalmic instruments – Corneal topographers (ISO 19980:2021)
- DS/EN 1096-2:2012 Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
- DS/EN 1096-1:2012 Glass in building - Coated glass - Part 1: Definitions and classification
- DS/EN 1096-4/Till. 1:2006 Glass in building – Coated glass – Part 4: Evaluation of conformity/Product standard
- DS/EN 1096-4:2004 Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
- DS/EN ISO 3892:2001 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
IT-UNI, Coating instrument
Professional Standard - Medicine, Coating instrument
ES-UNE, Coating instrument
Association Francaise de Normalisation, Coating instrument
- NF EN ISO 19980:2021 Instruments ophtalmiques - Topographes de la cornée
- NF S10-005-7:2021 Optics and photonics - Optical coatings - Part 7 : minimum requirements for neutral beam splitter coatings
- NF EN 1096-2:2012 Verre dans la construction - Verre à couche - Partie 2 : exigences et méthodes d'essai pour les couches de classes A, B et S
- NF ISO 9211-7:2021 Optique et photonique - Traitements optiques - Partie 7 : exigences minimales pour les traitements optiques séparateurs de faisceaux neutres
- NF P78-312-5*NF EN 1096-5:2016 Glass in building - Coated glass - Part 5 : test method and classification for the self-cleaning performances of coated glass surfaces
- NF EN 1096-5:2016 Verre dans la construction - Verre à couche - Partie 5 : méthode d'essai et classification des performances autonettoyantes des surfaces de verre à couche
- NF A91-114:1995 Metallic coatings. Measurement of coating thickness. Profilometric method.
- NF T36-005:2010 Paints and varnishes - Characterization of coating materials.
- NF S10-005-1*NF ISO 9211-1:2018 Optics and photonics - Optical coatings - Part 1 : vocabulary
- NF EN 1096-4:2018 Verre dans la construction - Verre à couche - Partie 4 : norme de produit
- NF S86-306:2003 Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits.
- NF T35-202*NF EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements
- NF EN 1096-1:2012 Verre dans la construction - Verre à couche - Partie 1 : définitions et classification
- XP T30-129*XP CEN ISO/TS 19397:2018 Determination of the film thickness of coatings using an ultrasonic gage
- NF T35-200*NF EN 12621+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements.
- NF T35-200/IN1*NF EN 12621/IN1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
- NF S11-610:1996 Optics and optical instruments. Contact lenses. Part 1 : specification for rigid corneal and scleral contact lenses.
- NF A91-149*NF EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography.
- NF T37-001-3:2014 Coil coated metals - Test methods - Part 3 : colour difference - Instrumental comparison
- NF EN 1096-3:2012 Verre dans la construction - Verre à couche - Partie 3 : exigences et méthodes d'essai pour les couches C et D
- NF EN ISO 18452:2016 Céramiques techniques - Détermination de l'épaisseur des films céramiques avec un profilomètre à contact
- NF T94-367:2013 Chemicals used for treatment of water intended for human consumption - Sodium chloride for on site electrochlorination using membrane cells
- NF T37-001-3*NF EN 13523-3:2021 Coil coated metals - Test methods - Part 3 : colour difference and metamerism - Instrumental comparison
- NF C74-327:2003 Medical electrical equipment - Part 2-39 : particular requirements for the safety of peritoneal dialysis equipment.
- NF L24-056-006*NF EN 4673-006:2011 Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 006 : in heat resisting steel FE-PA2601 (A286), MoS2 coated.
未注明发布机构, Coating instrument
American Society for Testing and Materials (ASTM), Coating instrument
- ASTM F1367-98(2003) Standard Specification for Chromium Sputtering Targets for Thin Film Applications
- ASTM F1367-98 Standard Specification for Chromium Sputtering Targets for Thin Film Applications
- ASTM C1048-18 Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass
- ASTM B636-84(2006)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
- ASTM B636-84(2001) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
- ASTM B636-84(1992)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
- ASTM B520-93(2007) Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
- ASTM B636-84(2010) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
- ASTM F1594-95(1999) Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
- ASTM D5702-02 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
- ASTM D5702-95 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
- ASTM F1594-95(2003) Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
- ASTM F1594-95(2011) Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
- ASTM B636/B636M-15 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
- ASTM D5702-07 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
- ASTM D5702-07(2012) Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
- ASTM E2244-05 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM E2244-11 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM E2244-11(2018) Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM B244-09(2021) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM B244-09(2014) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM B244-97 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM B244-97(2002) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM E2246-02 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM E2246-05 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM E2244-02 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM E2245-05 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM E2245-02 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM E2245-11 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM E2246-11 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM E2244-11e1 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM E2245-11e1 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM E2246-11e1 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM F673-90(1996)e1 Standard Test Methods for Measuring Resistivity of Semiconductor Slices or Sheet Resistance of Semiconductor Films with a Noncontact Eddy-Current Gage
- ASTM D3786/D3786M-18(2023) Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
Group Standards of the People's Republic of China, Coating instrument
- T/QGCML 906-2023 Reflective cup coating process specification
- T/CASME 571-2023 Laser holographic anti-counterfeiting aluminized film
- T/ZZB 2003-2020 Low emissivity coated glass for building
- T/ZBH 005-2018 Anti-reflective coated glass for building
- T/QGCML 1178-2023 Vacuum coating online cleaning device
- T/STSI 38-2022 Technical specification for coated aluminum alloy formwork
- T/CSTM 00030-2019 Ultraviolet（UV） curing coatings for vacuum metallization
- T/QGCML 853-2023 Good Manufacturing Practice for Automotive Paint Coating Agents
- T/GVS 010-2022 Generic specification for vacuum roll-to-roll coating plant
- T/GVS 004-2022 Specification for occupation skill level evaluation of optical vacuum coating
- T/GDCA 018-2023 General principles of facial mask for radiofrequency appliance
- T/GVS 002-2021 Generic specification for high precision magnetron sputtering coating plant
- T/SDSIA 3-2016 Technical requirements for vacuum coating heat-absorbing materials for solar collectors
- T/CBMF 153-2021 Technical specification for green-design product assessment—Online Low-E coated glass
- T/ZJYBF 0004-2023 Polyester/aluminized polyester/polyethylene composite films and bags for oral solid preparations
- T/GVS 001-2021 Vacuum coating plant—Electromagnetic compatibility—Technical specification for shielding and radiation safety
- T/BIE 002-2022 Test method for protective properties of parylene vacuum vapor deposition coatings for printed board assemblies
European Committee for Standardization (CEN), Coating instrument
- EN ISO 19980:2021 Ophthalmic instruments - Corneal topographers (ISO 19980:2021)
- EN ISO 19980:2012 Ophthalmic instruments - Corneal topographers (ISO 19980:2012)
- EN ISO 19490:2017 Dentistry - Sinus membrane elevator
- EN ISO 12865:1998 Ophthalmic Instruments - Retinoscopes ISO 12865:1998
- EN 1096-1:2012 Glass in building - Coated glass - Part 1: Definitions and classification
- EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
- EN ISO 4518:1995 Metallic Coatings - Measurement of Coating Thickness - Profilometric Method (ISO 4518:1990)
- EN ISO 12865:2006 Ophthalmic instruments - Retinoscopes (ISO 12865:2006)
- EN 13523-1:2009 Coil coated metals - Test methods - Part 1: Film thickness
- EN 50072:1992 Medical electrical equipment; particular requirements for the safety of peritoneal dialysis equipment
- EN 1096-4:2004 Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
- EN 1096-4:2018 Glass in building - Coated glass - Part 4: Product standard
- EN 16370:2013 Chemicals used for treatment of water intended for human consumption - Sodium chloride for on site electrochlorination using membrane cells
- EN 14805:2008 Chemicals used for treatment of water intended for human consumption - Sodium chloride for on site electrochlorination using non-membrane technology
CEN - European Committee for Standardization, Coating instrument
- EN ISO 19980:2005 Ophthalmic instruments - Corneal topographers
- EN 1096-5:2016 Glass in building - Coated glass - Part 5 - Test method and classification for the self-cleaning performances of coated glass surfaces
- CEN ISO/TS 19397:2018 Determination of the film thickness of coatings using an ultrasonic gage
British Standards Institution (BSI), Coating instrument
- BS ISO 9211-8:2018 Optics and photonics. Optical coatings - Minimum requirements for coatings used for laser optics
- BS EN ISO 19490:2017 Dentistry. Sinus membrane elevator
- BS EN ISO 19980:2021 Tracked Changes. Ophthalmic instruments. Corneal topographers
- 19/30378395 DC BS EN ISO 19980. Ophthalmic instruments. Corneal topographers
- BS ISO 9211-1:2010 Optics and photonics - Optical coatings - Definitions
- BS EN 13523-1:2009 Coil coated metals - Test methods - Film thickness
- BS EN 13523-1:2010 Coil coated metals. Test methods. Film thickness
- BS EN ISO 22553-7:2021 Paints and varnishes. Electro-deposition coatings - Electrical wet-film resistance
- BS EN ISO 19980:2012 Ophthalmic instruments. Corneal topographers
- BS ISO 9211-1:2018 Tracked Changes. Optics and photonics. Optical coatings. Vocabulary
- BS EN ISO 9717:2013 Metallic and other inorganic coatings. Phosphate conversion coating of metals
- BS EN 1096-4:2018 Tracked Changes. Glass in building. Coated glass. Product standard
- PD CEN ISO/TS 19397:2018 Determination of the film thickness of coatings using an ultrasonic gage
- 23/30437586 DC BS ISO 9211-1. Optics and photonics. Optical coatings - Part 1. Vocabulary
- BS ISO 17514:2005 Time-measuring instruments - Photoluminescent deposits - Test methods and requirements
- 23/30437583 DC BS ISO 9211-2. Optics and photonics. Optical coatings - Part 2. Optical properties
- BS EN 16370:2013 Chemicals used for treatment of water intended for human consumption. Sodium chloride for on site electrochlorination using membrane cells
- PD IEC TR 63258:2021 Nanotechnologies. A guideline for ellipsometry application to evaluate the thickness of nanoscale films
- BS ISO 9211-7:2021 Tracked Changes. Optics and photonics. Optical coatings. Minimum requirements for neutral beam splitter coatings
- BS EN 14805:2008 Chemicals used for treatment of water intended for human
consumption - Sodium chloride for on site electrochlorination
using non-membrane technology
- BS EN 14805:2022 Chemicals used for treatment of water intended for human
consumption - Sodium chloride for on site electrochlorination
using non-membrane technology
- BS EN 1096-5:2016 Glass in building. Coated glass. Test method and classification for the self-cleaning performances of coated glass surfaces
- BS EN IEC 60746-4:2019 Expression of performance of electrochemical analyzers - Dissolved oxygen in water measured by membrane-covered amperometric sensors
- BS ISO 9211-4:2022 Tracked Changes. Optics and photonics. Optical coatings. Specific test methods: abrasion, adhesion and resistance to water
Professional Standard - Electron, Coating instrument
- SJ/T 11185-1998 General specifications for vapor coating equipment
- SJ/T 11131-1997 Basic parameter series of evaporation plating equipment
- SJ/T 31260-1994 Requirements of readiness and methods of inspection and assessment for A500B2K high vacuum film coaters
- SJ/T 31257-1994 Requirements of readiness and methods of inspection and assessment for AD01 coating machines
- SJ/T 31082-1994 Requirements of readiness and methods of inspection and assessment for vacuum coating equipment
- SJ/T 31083-1994 Requirements of readiness and methods of inspection and assessment for DM-450A vacuum coating equipment
Professional Standard - Aerospace, Coating instrument
- QJ/Z 149-1985 Detailed rules for pickling process of coated wire
- QJ 20037-2011 Technical requirements for covered wire acid pickling
- QJ 1827-1989 Test method for contact resistance of low-resistance metal plating layer and chemical conversion film layer
Professional Standard - Military and Civilian Products, Coating instrument
- WJ 2343-1995 Specification for vacuum ion plating nitrogen titanium film
- WJ 288-1965 Optical parts are coated with black matte paint
- WJ/Z 8-1965 Code of handling of magnesium fluoride for coating of optical parts
- WJ 410-1965 Technical conditions of ethyl silicate for optical element coating
- WJ 411-1965 Technical conditions of titanium ethoxide for optical element coating
- WJ/Z 6-1965 Typical process of ethyl silicate for optical parts coating
- WJ/Z 7-1965 Typical process of ethyl titanate for coating optical parts
- WJ 2356-1995 Vacuum coating with time quota for special process of optical parts
- WJ 1855-1989 Gold electroplating for metal cladding optical instruments
- WJ 455-1995 Metal coating. Specifications for nickel electroplated coatings of optical instrument
- WJ 456-1995 Metal coating. Specifications for chromium electroplated coatings of optical instrument
- WJ 457-1995 Metal coating. Specifications for cadmium electroplated coatings of optical instrument
- WJ 458-1995 Metal coating. Specifications for zinc electroplated coatings of optical instrument
- WJ 459-1995 Metal coating. Specifications for silver electroplated coatings of optical instrument
- WJ 460-1995 Metal coating. Specifications for tin electroplated coatings of optical instrument
- WJ 465-1995 Metal coating. Specifications for copper electroplated coatings of optical instrument
- WJ 1573-1984 Circular coating frame for optical parts cold processing and special process fixtures
- WJ 454-1995 Metal coating. Specifications for black nickel electroplated coatings of optical instrument
- WJ/Z 209-1986 Specifications for Electroless Nickel Plating on Aluminum and Aluminum Alloys for Optical Instruments
- WJ 1568-1984 45° chemical coating fixture for optical parts cold processing and special process fixture
- WJ 1569-1984 90° chemical coating fixture for optical parts cold processing and special process fixture
- WJ 1572-1984 Spherical Vacuum Coating Holder for Fixtures for Cold Working of Optical Parts and Special Processes
- WJ 1574-1984 Right-angle prism coating frame for fixtures for cold processing of optical parts and special processes
- WJ 1575-1984 Parallel vacuum coating fixtures for optical parts cold processing and special process fixtures
- WJ 1576-1984 Roof-type vacuum coating fixture for optical parts cold processing and special process
- WJ 467-1995 Metal and non-metal coatings Pre-painting surface preparation for optical instrument
- WJ 1567-1984 Fixtures for cold processing of optical parts and special processes Thread pressure ring type chemical coating fixtures
- WJ 2016-1991 Metallic and non-metallic coatings Stainless steel passivation film for military optical instruments
- WJ 1565-1984 Optical parts cold processing and special process fixture taper upper ring type chemical coating fixture
- WJ 1566-1984 Optical parts cold processing and special process fixture taper pressure ring type chemical coating fixture
工业和信息化部, Coating instrument
- JC/T 2388-2016 Self-cleaning insulated flat coated glass
- HG/T 5300-2018 Refractive index matching hardened film for indium tin oxide (ITO) coating
- WJ/Z 6-2014 Typical process of ethyl silicate for optical parts coating
- HG/T 4950-2016 Matte polyethylene terephthalate (PET) hardened film for indium tin oxide (ITO) coating
- HG/T 5299-2018 Transparent polyethylene terephthalate (PET) hardened film for indium tin oxide (ITO) coating
- SJ/T 31083-2016 Vacuum coating equipment integrity requirements and inspection and assessment methods
- HG/T 5893-2021 Microfiltration membrane filter integrity automatic tester
- YS/T 1186-2017 Falling sand tester for testing the wear resistance of anodized films and organic polymer films on aluminum surfaces
Lithuanian Standards Office , Coating instrument
- LST EN 1096-3-2012 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
- LST EN ISO 19980:2012 Ophthalmic instruments - Corneal topographers (ISO 19980:2012)
- LST EN ISO 19980:2021 Ophthalmic instruments - Corneal topographers (ISO 19980:2021)
- LST ISO 4520:2003 Chromate conversion coatings on electroplated zinc and cadmium coatings (idt ISO 4520:1981)
- LST EN 1096-2-2012 Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
- LST EN 1096-1-2012 Glass in building - Coated glass - Part 1: Definitions and classification
- LST EN 1096-4-2005 Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
AENOR, Coating instrument
- UNE-EN 1096-3:2012 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
- UNE-EN ISO 19980:2012 Ophthalmic instruments - Corneal topographers (ISO 19980:2012)
- UNE-EN 1096-5:2017 Glass in building - Coated glass - Part 5 - Test method and classification for the self-cleaning performances of coated glass surfaces
- UNE-EN 1096-2:2012 Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
- UNE-EN 1096-1:2012 Glass in building - Coated glass - Part 1: Definitions and classification
- UNE-EN 1096-4:2005 Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
- UNE-EN 15755-1:2015 Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and requirements
- UNE 60495-2:2009 Gaseous fuels. Diaphragm domestic meter supports for gaseous fuels. Part 2: Meters placed outside.
- UNE-EN ISO 3892:2002 Conversion coatings on metallic materials- Determination of coating mass per unit area- Gravimetric methods. (ISO 3892:2000)
National Metrological Verification Regulations of the People's Republic of China, Coating instrument
- JJG(交通) 125-2015 Abrasion tester for paint films
- JJG 125-2015 Paint Abrasion Tester
- JJG 084-2007 Reflective film impact resistance performance tester
- JJG 147-2020 Coating Adhesion Tester for Water Transport Engineering
- JJG 291-1999 Verification Regulation of Film Electrode Dissolved Oxygen Meter
- JJG 291-2008 Verification Regulation of Dissolved Oxygen Meter with Covered-Membrane-Electrode
- JJG(交通) 083-2007 Measurer for Adhesion Performance of Retroreflective Sheeting
- JJG(交通) 084-2007 Measurer for Impact Resistance of Retroreflective Sheeting
- JJG(交通) 082-2007 Measurer for Adhesion Performance of Zinc Coating of Steel Components
- JJG(交通) 085-2007 Measurer for Liner Removal Performance of Retroreflective Sheeting
Professional Standard - Traffic, Coating instrument
- JT/T 995-2015 Abrasion tester for paint films
- JT/T 685-2007 Measurer for adhesion performance of retroreflective sheeting
- JT/T 686-2007 Measureer for impact resistance of retroreflective sheeting
- JT/T 684-2007 Measurer for adhesion performance of zinc coatingof steel components
- JT/T 687-2007 Measurer for liner removal performance of retroreflective sheeting
国家能源局, Coating instrument
U.S. Military Regulations and Norms, Coating instrument
Professional Standard - Light Industry, Coating instrument
- QB 2682-2005 Properties and quality requirement for anti-reflection coating of spectacles lenses
- QB/T 4503-2013 Gold jacket infra-red halogen lamp
- QB/T 2702-2005 Test method of abrasion-resistance for coating of spectacles lenses
- QB/T 3816-1999 Thickness testing method of the metal deposits and aluminum oxide films for the light industrial products.Weighing method
- QB/T 3825-1999 Testing method of the white chromatic conversion coatings existance and the corrosion resistance of the zinc deposits for the light industrial products
Jiangsu Provincial Standard of the People's Republic of China, Coating instrument
- DB32/T 2175-2012 Durability requirements of coated glass film layer for solar cells
- DB32/T 3792-2020 Graphene film light transmittance test light transmittance instrument method
IPC - Association Connecting Electronics Industries, Coating instrument
国家市场监督管理总局、中国国家标准化管理委员会, Coating instrument
- GB/T 41314-2022 Coated glass for photovoltaic modules in building
- GB 38455-2019 Ophthalmic instruments—Ophthalmometers
- GB/T 37361-2019 Determination of the film thickness—Ultrasonic thickness gauge method
- GB/T 40262-2021 Metal coating fabric—Determination of metal layer adhesive force—Tape method
SAE - SAE International, Coating instrument
CH-SNV, Coating instrument
Professional Standard - Geology, Coating instrument
Professional Standard - Urban Construction, Coating instrument
DE-VDA, Coating instrument
Professional Standard - Ocean, Coating instrument
National Metrological Technical Specifications of the People's Republic of China, Coating instrument
- JJF 1865-2020 Calibration Specification for Corneal Topographers
- JJF(石化) 001-2015 Calibration Specification for Paint Film Scrub Resistance Testers
- JJF 1148-2006 Calibration Specification for Test Devices of Contact Lenses
- JJF(石化)001-2015 Calibration Specification for Paint Film Scrub Resistance Testers
- JJF(石化) 003-2015 Calibration Specification for Putty Film Flexibility Testers
- JJF 1488-2014 Calibration Specification for Rubber and Plastic Film Gage
- JJF(石化)003-2015 Calibration Specification for Putty Film Flexibility Testers
- JJF 1306-2011 Calibration Specification for X-Ray Fluorescence Coating Thickness Instruments
- JJF(石化) 035-2020 Calibration Specification for Coating Bend Testers(Cylindrical Mandrel)
- JJF(石化)035-2020 Calibration Specification for Coating Bend Testers(Cylindrical Mandrel)
- JJF 2010-2022 Calibration specification for reflective film adhesion tester
- JJF(石化) 036-2020 Calibration Specification for Film Adhesion Testers(Circle-drawing method)
- JJF(石化)036-2020 Calibration Specification for Film Adhesion Testers(Circle-drawing Method)
- JJF 1441-2013 Program of Pattern Evaluation of Dissolved Oxygen Meter With Covered-Membrane-Electrode
- JJF 1613-2017 Calibration Specification for Thin Film Thickness Measurement Instruments by Grazing Incidence X-Ray Reflectivity
Professional Standard - Water Conservancy, Coating instrument
- SL 408-2007 Calibrating code for impermeablility testing instrument of geomembranes
- SL 407-2007 Calibrating code for permeability testing instrument of geomembranes
YU-JUS, Coating instrument
- JUS C.A6.051-1989 Chromate conversicm coatlngs on electropJatod zJrtc and cadmium coatings. General regulrements and classifIcation
Professional Standard - Automobile, Coating instrument
- QC/T 985-2014 Solar reflective coated laminated automotive windshield
Shanghai Provincial Standard of the People's Republic of China, Coating instrument
ZA-SANS, Coating instrument
- SANS 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method
- SANS 60384-2:2007 Fixed capacitors for use in electronic equipment Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors
Professional Standard - Nuclear Industry, Coating instrument
- EJ/T 20216-2018 Environmental radon concentration double filter membrane measuring instrument
Military Standard of the People's Republic of China-General Armament Department, Coating instrument
- GJB/J 3828-1999 Calibration procedures for hotline/hot film anemometer
- GJB 8687-2015 Calibration procedures for optical film refractive index and thickness testers
- GJB 76.2-1985 Polyimide film insulated wire and cable for aviation Silver-plated copper core PI/F46 insulated PI paint sheathed wire
- GJB 76.3-1985 Aviation polyimide film insulated wire and cable silver-plated copper core PI/F46 insulated F4 raw tape sheathed wire
Professional Standard - Agriculture, Coating instrument
- NY/T 805-2004 Specification of reflective material for solar cookers
Fujian Provincial Standard of the People's Republic of China, Coating instrument
- DB35/T 1874-2019 General technical specifications for titanium pentoxide coating materials
IN-BIS, Coating instrument
VN-TCVN, Coating instrument
Taiwan Provincial Standard of the People's Republic of China, Coating instrument
- CNS 4162-1987 Measurement of Thickness of Metallic Coatings by the Jet Test Method
- CNS 13788-1996 Methods of Test for Water Vapor Transmission Rate of Plastic Films and Sheets (Instrument Method)
European Association of Aerospace Industries, Coating instrument
JO-JSMO, Coating instrument
Professional Standard - Public Safety Standards, Coating instrument
- GA/T 1651-2019 Technical Specifications for Forensic Science Vacuum Coating to Reveal Fingerprints
American National Standards Institute （ANSI), Coating instrument
- ANSI/EIA 495-A:1989 Film Dielectric Capacitors with Metallized Paper Electrodes for Alternating Current Applications
- ANSI/ASTM D5946:2001 Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
- ANSI/ASTM D4272:1999 Plastic Film by Instrumented Dart Drop, Test Method for Impact Resistance of (08.03)
PL-PKN, Coating instrument
- PN D56136-1986 Machines and equipment for wood processing Varnishing coaters Base parameters
Hunan Provincial Standard of the People's Republic of China, Coating instrument
- DB43/T 1168.5-2019 General technical requirements for food packaging multi-layer aluminized composite film and bags
- DB43/T 1168.4-2019 General technical requirements for food packaging multi-layer non-aluminized composite film and bags
工业和信息化部/国家能源局, Coating instrument
- JB/T 12962.3-2016 Energy dispersive X-ray fluorescence spectrometer Part 3: Coating thickness analyzer
SG-SPRING SG, Coating instrument
- SS 373 Pt.2-1994 Specification for Optics and optical instruments - Contact lenses Part 2: Soft corneal and scleral contact lenses
(U.S.) Ford Automotive Standards, Coating instrument
- FORD ESF-M3L58-A-2003 SLEEVING, COATED GLASS, HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M98P11-A2-2015 COATED WINDOW MOLDINGS, EXTERIOR COMPONENTS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M1P85-B1-2011 PLATING, ELECTROLYTIC ZINC, 5 MICROMETERS, THIN FILM PASSIVATE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD FLTM BU 101-07-2000 DETERMINATION OF SHEAR ADHESION OF POLYCARBONATE FILM INSTRUMENT DIAL APPLIQUES
- FORD WSS-M1P85-B2-2011 PLATING, ELECTROLYTIC ZINC, 8 MICROMETERS, THIN FILM PASSIVATE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M1P85-B3-2011 PLATING, ELECTROLYTIC ZINC, 8 MICROMETERS, THICK FILM PASSIVATE ***TO BE USED WITH FORD WSS-M99P1111-A***
Professional Standard - Aviation, Coating instrument
- HB 5067.2-2005 Test methods for hydrogen embrittlement evaluation of plating processes--Part 2: Hydrogen detection instrument method
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Coating instrument
- GJB/J 5463-2005 Verification regulation for measurement equipment of optical film refractive index and thickness
Canadian Standards Association (CSA), Coating instrument
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Coating instrument
- GB/T 33826-2017 Measurement of nanofilm thickness on glass substrate—Profilometric method
Professional Standard - Pharmaceutical Packaging, Coating instrument
- YBB 0019-2004 Laminated Films and Pouches (BOPP/VMCPP) for Pharmaceutical Packaging
International Electrotechnical Commission (IEC), Coating instrument
- IEC 60601-2-39:1999 Medical electrical equipment - Part 2-39: Particular requirements for the safety of peritoneal dialysis equipment
- IEC 60601-2-39:2003 Medical electrical equipment - Part 2-39: Particular requirements for the safety of peritoneal dialysis equipment
CZ-CSN, Coating instrument
- CSN ISO 6581:1993 Anodizing of aluminium and its alloys. Determinatíon of the fastness to ultra-violet light of coloured anodk oxide coatings