ZH
RU
ES
ford pa6 material
ford pa6 material, Total:343 items.
In the international standard classification, ford pa6 material involves: Paint coating equipment, Services, Magnetic materials, Electricity. Magnetism. Electrical and magnetic measurements, Reinforced plastics, Animal feeding stuffs.
(U.S.) Ford Automotive Standards, ford pa6 material
- FORD WSS-M4D804-A2-2014 POLYAMIDE 6 (PA6), HEAT STABILIZED BLOW MOLDING GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D960-A2-2012 ABS + POLYAMIDE 6 BLEND (ABS + PA6) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D986-A-2013 POLYAMIDE (PA6) -45% GLASS FIBER REINFORCED, MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSA-M2D451-A2-2008 HYDROGENATED NITRILE (HNBR) RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D674-A3-2021 POLYAMIDE 6 (PA6), HEAT STABILIZED, 50% GLASS FIBER REINFORCED MOLDING COMPOUND, MOLD IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D627-A-2010 POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D627-A2-2010 POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESE-M7G3-A-2011 LABEL, POLYESTER, THERMAL TRANSFER PRINTABLE, PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D822-A-2014 POLYAMIDE 6 (PA6), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSF-M3G207-A-2011 LABEL, ACRYLIC FILM, TWO LAYER, LASER ENGRAVABLE, PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A3-2011 PERFORMANCE OF PLASTIC MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
- FORD WSK-M98P5-A-2011 FINISHED PARTS, PLASTICS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D819-A-2008 POLYETHYLENE (PE) FOAM, CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A9-2011 PERFORMANCE OF UREA SCR MATERIALS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
- FORD WSB-M4D926-A-2010 POLYCARBONATE (PC), POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A7-2011 PERFORMANCE OF PLASTIC MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
- FORD WSS-M4D822-A2-2014 POLYAMIDE 6 (PA6), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D820-A-2008 POLYETHYLENE (PE) FOAM, CROSSLINKED, CLOSED CELL, 48 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A4-2011 PERFORMANCE OF ELASTOMERIC MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
- FORD WSK-M4D796-A1-2010 POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D796-A2-2010 POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD SK-M99J9587-B-2012 STONE PECK RESISTANT MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD SK-M99J9587-A)
- FORD WSS-M99P23-C2-2013 MATERIAL CONTROL, GRAY BOX COMPONENTS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99P23-C1)
- FORD WSS-M98P14-A3-2014 PERFORMANCE OF PLASTIC MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
- FORD WSS-M98P14-A5-2011 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
- FORD WSF-M4D757-A-2010 POLYCARBONATE (PC), 12.5% TiO2 FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D797-A-2010 POLYCARBONATE (PC), 22% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESF-M4D255-A-2011 ABS MOLDING COMPOUND - HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D955-A-2012 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A8-2011 PERFORMANCE OF ELASTOMERIC MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
- FORD ESB-M1C31-B-2003 GREASE, HIGH TEMPERATURE - WATERPROOF WITH FILLER - NLGI #1 ***TO BE USED WITH FORD WSS-M99P1111-A*** [Replaced: FORD ESB-M1C31-A, FORD ESB-M1C31-A, FORD ESB-M1C31-A, FORD ESB-M1C31-A, FORD ESB-M1C35-A]
- FORD WSS-M98P14-A5-2014 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
- FORD WSK-M4D792-A2-2011 ABS, HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD SK-M99J9589-C-2012 STONE PECK RESISTANT REPAIR MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD SK-M99J9589-A)
- FORD WSK-M4D761-A-2010 POLYCARBONATE (PC) MEDIUM MELT FLOW RATE MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D761-A2-2010 POLYCARBONATE (PC), HIGH MELT FLOW RATE MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSF-M4D628-A-2011 POLYAMIDE (PA) 66 MOLDING COMPOUND, 25 % GLASS FIBER REINFORCED, FLAME RETARDED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A7-2014 PERFORMANCE OF PLASTIC MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
- FORD WSS-M98P14-A4-2014 PERFORMANCE OF ELASTOMERIC MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
- FORD ESA-M4D197-A-2012 POLYETHYLENE, COPOLYMER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** [Use: FORD WSK-M4D645-A, FORD WSK-M4D645-A, FORD WSK-M4D645-A]
- FORD WSS-M98P14-A6-2011 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
- FORD WSS-M98P14-A2-2011 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
- FORD WSS-M98P14-A2-2014 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
- FORD WSK-M2P168-A-2010 PAINT PERFORMANCE, ZINC-RICH PRIMER, COOLING AND ALLIED TUBES ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D796-A3-2010 POLYCARBONATE (PC), MODIFIED, HIGH FLOW AND HIGH HEAT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D922-A-2010 POLYCARBONATE (PC), 10% GLASS FIBER REINFORCED, POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D926-A2-2010 POLYCARBONATE (PC), IMPACT MODIFIED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M1A341-A11-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1)
- FORD WSS-M1A341-A12-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1)
- FORD WSK-M15J4-A-2012 PAINT, TWO PACK, PLASTIC SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M15P16-A-2013 CUSHION MATERIALS, INFLATABLE RESTRAINT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A6-2014 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
- FORD ESB-M8P4-A-2011 PLASTIC TRIM - INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A1-2011 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A3-2021 PERFORMANCE OF PLASTIC MATERIALS USED IN FLEX FUELS (Shown on FORD WSS-M98P14-A1)
- FORD WSK-M4D647-A-2011 POLYAMIDE (PA) 66 MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M99P23-C1-2013 MATERIAL CONTROL, BLACK BOX COMPONENTS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D745-A-2011 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT HIGH IMPACT STRENGTH, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A8-2014 PERFORMANCE OF ELASTOMERIC MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
- FORD WSS-M4D964-A3-2011 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P188-B1-2015 PAINT PERFORMANCE, PLASTIC SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P188-A1-2014 PAINT PERFORMANCE, PLASTIC SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P188-B1-2021 PAINT PERFORMANCE, PLASTIC SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D911-B-2011 POLYPROPYLENE (PP) COPOLYMER, HIGH IMPACT 100% RECYCLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A7-2021 PERFORMANCE OF PLASTIC MATERIALS USED IN BIO-DIESEL FUELS (Shown on FORD WSS-M98P14-A1)
- FORD WSS-M98P14-A4-2021 PERFORMANCE OF ELASTOMERIC MATERIALS USED IN FLEX FUELS (Shown on FORD WSS-M98P14-A1)
- FORD WSS-M99D514-A2-2014 THERMOPLASTIC COMPOUNDS USING DIRECT LONG GLASS FIBER TECHNOLOGY (DLFT) / INJECTION MOLDING COMPOUNDING (IMC) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99D514-A1)
- FORD WSS-M98P14-A10-2011 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN CNG FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
- FORD WSS-M98P14-A5-2021 PERFORMANCE OF PLASTIC FUELTUBE MATERIALS USED IN BIO-DIESEL FUELS (Shown on FORD WSS-M98P14-A1)
- FORD WSS-M98P14-A1-2014 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESH-M6J149-A-2008 PRIMER, ACRYLIC, SOLVENT BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M15P38-A-2008 HEADLINER, INTEGRAL AIR DUCT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESF-M99G147-A-2012 CARBON BRUSH MATERIAL (2153-2660 micro ohm.cm SPECIFIC RESISTANCE) ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D673-A-2011 POLYAMIDE (PA) 66, HEAT STABILIZED 35% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSD-M1H516-B2-2007 FABRIC, RUSHING PATTERN, KNITTED, 6 mm - ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSD-M1H516-A3
- FORD WSD-M1H516-D2-2007 FABRIC, RUSHING PATTERN, KNITTED, 6 mm - ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSD-M1H516-A3
- FORD WSD-M1A283-B37-2013 STEEL, CROSS REFERENCE FOR STANDARD PARTS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M1A283-B1)
- FORD WSD-M1A283-B51-2013 STEEL, CROSS REFERENCE FOR STANDARD PARTS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M1A283-B1)
- FORD WSD-M1A283-B50-2013 STEEL, CROSS REFERENCE FOR STANDARD PARTS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M1A283-B1)
- FORD ESB-M4D330-A2-2011 IONOMER (ETHYLENE) MOLDING COMPOUND, PIGMENTED ZINC TYPE - EXTERIOR GRADE - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M4D330-A1)
- FORD WSB-M4D690-A-2011 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, UV STABILIZED, LOW GLOSS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M99J310-A-2012 MOLDED COATING FOR COMPRESSION MOLDED FRP - HARDENER PORTION ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M99J309-A)
- FORD ESB-M4D330-A1-2011 IONOMER (ETHYLENE) MOLDING COMPOUND, CLEAR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESE-M99J289-A-2012 LABEL, VINYL, PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M1H1178-A1-2014 FABRIC, MATERIAL PEARL PATTERN, DOBBY WOVEN, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESA-M2G146-B-2014 ADHESIVE, THERMOSETTING - FOR FRICTION MATERIALS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESA-M2G146-A-2014 ADHESIVE, THERMOSETTING - FOR FRICTION MATERIALS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WRS-M99P42-A2-2010 TEXTILE MATERIALS, IDENTIFICATION OF RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A2-2021 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIAL USED IN FLEX FUELS (Shown on FORD WSS-M98P14-A1)
- FORD ESB-M4D330-A4-2011 IONOMER (ETHYLENE) MOLDING COMPOUND, BLACK SODIUM TYPE - EXTERIOR GRADE - NOT PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M4D330-A1)
- FORD ESB-M4D330-A6-2011 IONOMER (ETHYLENE) MOLDING COMPOUND, GLASS FILLED - BLACK - ZINC/SODIUM TYPE - EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M4D330-A1)
- FORD WSK-M4D788-A2-2011 POLYPROPYLENE (PP), COPOLYMER, 40% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M4D788-A1)
- FORD WRS-M4D729-B2-2011 POLYPROPYLENE (PP), 20% MINERAL FILLED, MOLDING COMPOUND, 50% RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M4D729-B1
- FORD WSS-M4D865-A4-2012 POLYPROPYLENE (PP) HOMOPOLYMER, 30% LONG GLASS FIBER AND MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A6-2021 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIALS USED IN BIO-DIESEL FUELS (Shown on FORD WSS-M98P14-A1)
- FORD WSK-M4D564-A-2010 POLYAMIDE (PA) 66, MOLDING COMPOUND - SELF EXTINGUISHING (SE) ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WRS-M99P42-A1-2011 MOLDING COMPOUND, IDENTIFICATION OF RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSD-M4D651-A-2011 POLYPROPYLENE (PP), 10% MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D878-A-2011 POLYARYLETHERKETONE (PAEK), SELF-EXTINGUISHING (SE) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WRS-M99P42-A2-2011 TEXTILE MATERIALS, IDENTIFICATION OF RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M16J11-A-2012 PAINT, CLEARCOAT, TWO PACK, PLASTIC SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESK-M6J147-A-2012 PRIMER, TWO PACK, PLASTIC SUBSTRATES, HIGH FLEXIBLE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M6J147-B-2014 PRIMER, TWO PACK, PLASTIC SUBSTRATES, HIGH FLEXIBLE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P15-A1-2014 ACRYLIC COATING PERFORMANCE, RIGID SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D827-A-2011 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT HIGH IMPACT, LOW GLOSS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2F208-A3-2012 FLEXIBLE COVERSTOCK, THERMOPLASTIC OLEFIN (TPO), POLYESTER KNITTED SPACER FABRIC BACKED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2F208-A1
- FORD WSS-M2F208-A2-2014 FLEXIBLE COVERSTOCK, THERMOPLASTIC OLEFIN (TPO), OPEN CELL POLYURETHANE FOAM BACKED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2F208-A1)
- FORD WSS-M1A341-A2-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A1*** (Shown on FORD WSS-M1A341-A1; No direct replacement, use CBP strategy)
- FORD WSS-M4D836-B2-2012 ABS, ELECTROPLATING GRADE MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D836-B1)
- FORD WSK-M4D626-A1-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT, SE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESK-M16J3-A-2012 PAINT, TWO PACK, PLASTIC SUBSTRATES, HIGH FLEXIBLE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M16J3-B-2012 PAINT, TWO PACK, HIGH FLEXIBLE, PLASTIC SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P14-A8-2021 PERFORMANCE OF ELASTOMERIC MATERIALS USED IN BIO-DIESEL FUELS (Shown on FORD WSS-M98P14-A1)
- FORD WSS-M1A374-A1-2013 STEEL, SHEET, HOT ROLLED, BORON TREATED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M1G3-A-2013 BINDING, VINYL PLASTIC ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESF-M11A5-A-2012 SOLDER - RESIN CORED (63-37) ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESE-M4G117-A-2014 COATING, PLASTIC - ANTISTICK ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESF-M4D405-D-2010 POLYETHYLENE TEREPHTHALATE (PET), 35 % GLASS FIBER/MICA REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESF-M4D405-B)
- FORD ESF-M4D405-D2-2010 POLYETHYLENE TEREPHTHALATE (PET), 45 % GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D744-A4-2011 ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 1.5 - 3.5, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M4D744-A2
- FORD ESB-M99J291-A3-2012 TAPE, URETHANE, PRESSURE SENSITIVE, CHIP RESISTANT, NON-VISIBLE APPLICATIONS - 0.36 MM (14 MIL) NOMINAL THICKNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD ESB-M99J291-A
- FORD WSS-M4D865-A3-2012 POLYPROPYLENE (PP) HOMOPOLYMER, 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND, HIGH PERFORMANCE, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P187-A2-2010 PAINT PERFORMANCE, WATER BASED, AUTODEPOSITED, NON VISIBLE EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D638-B-2011 POLYPROPYLENE (PP) MOLDING COMPOUND, MOLDED-IN-COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M16J13-A-2012 PAINT, TEXTURED, TWO PACK, FLEXIBLE, PLASTIC SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P158-A1-2015 PRINTED GRAPHICS PERFORMANCE, PLASTIC AND PAINTED SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M99J275-B-2012 PAINT, HOT STAMP TRANSFER, FIRST SURFACE EXTERIOR ACRYLIC PLASTIC***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD S-M99D4560-A-2007 DECORATIVE PLASTIC MOULDING ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D647-A-2013 POLYAMIDE (PA) 66 MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESE-M11A10-A-2012 SOLDER - SILVER BEARING ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M11A41-A-2012 SOLDER, 81 Sn/16.8 Cu/2.5 Zn ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESE-M99D40-A-2013 PLASTIC, MAGNETIC - INJECTION MOLDED *** TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESF-M4D405-C2-2010 POLYETHYLENE TEREPHTHALATE (PET), 30 % GLASS REINFORCED MOLDING COMPOUND, SELF-EXTINGUISHING (SE) ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M99D514-A2-2011 THERMOPLASTIC COMPOUNDS USING DIRECT LONG GLASS FIBER TECHNOLOGY (DLFT) / INJECTION MOLDING COMPOUNDING (IMC) ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M99D514-A1
- FORD WSS-M8P3-E3-2011 PERFORMANCE, FLEXIBLE POLYMERIC FILM, INTERIOR QUALITY, SUPPORTED PLUS FOAM LAMINATE AND/OR BACKING MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M8P3-E1
- FORD WRS-M5H50-A20-2021 LAMINATE, POLYESTER FABRIC, MOOREA PATTERN PILE WARP KNIT, RECYCLED, PIR/PCR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M5H50-A10)
- FORD ESB-M4G70-A-2011 SEALER, POLYVINYL CHLORIDE FOAM PLASTISOL - HEAT CURING ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2F208-A1-2012 FLEXIBLE COVERSTOCK, THERMOPLASTIC OLEFIN (TPO), POLYESTER KNITTED FABRIC BACKED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2F208-A1-2014 FLEXIBLE COVERSTOCK, THERMOPLASTIC OLEFIN (TPO), POLYESTER KNITTED FABRIC BACKED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M99P2222-B1-2011 PERFORMANCE, VEHICLE INTERIOR ENVIRONMENT QUALITY MATERIAL / COMPONENT REQUIREMENTS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M99P37-A-2014 PERFORMANCE,LAMINATED IN-COLOR FILM MATERIALS, CLASS "A" SURFACE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M99P37-B-2014 PERFORMANCE,LAMINATED IN-COLOR FILM MATERIALS, CLASS "A" SURFACE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D865-A-2010 POLYPROPYLENE (PP), 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D626-A2-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT, SE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D841-A2-2011 POLYPROPYLENE (PP) COPOLYMER, 16% MINERAL FILLED, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D841-A6-2011 POLYPROPYLENE (PP) COPOLYMER, 13 % TALC REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D729-B7-2011 POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, BLOW MOLDING COMPOUND, UNDERBODY AND ENGINE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D860-A-2011 ACETAL (POM) COPOLYMER, 25% MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D731-B1-2011 POLYPROPYLENE (PP) HOMOPOLYMER, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D741-B1-2011 POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESA-M2P111-A-2007 PAINT QUALITY, EXTERIOR - ELASTOMERIC SUBSTRATE - ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D775-A2-2014 POLYCARBONATE (PC), MOLDING COMPOUND, OPTICAL GRADE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M4D775-A1)
- FORD ESA-M4D465-A2-2011 TUBING, PTFE - POLYPHENYLENE SULFIDE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESA-M4D465-A1)
- FORD WSS-M2P185-A3-2015 PAINT PERFORMANCE, METALLIC SUBSTRATES ENGINES, STANDARD PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P185-A1)
- FORD WSS-M2A174-A2-2013 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, ENHANCED BAKE RESPONSE ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A174-A1
- FORD WSS-M2A175-A5-2013 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, OVERAGED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A175-A1
- FORD WSS-M2A175-A5-2015 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, OVERAGED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A175-A1)
- FORD WSD-M1H516-A3-2007 FABRIC, RUSHING PATTERN, KNITTED, UNLAMINATED - ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESH-M11A12-A-2012 SOLDER, 5 Sn/95 Pb ALLOYING PIG ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M8P3-E3-2012 PERFORMANCE, FLEXIBLE POLYMERIC FILM, INTERIOR QUALITY, SUPPORTED PLUS FOAM LAMINATE AND/OR BACKING MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M8P3-E1
- FORD WSS-M8P3-E3-2013 PERFORMANCE, FLEXIBLE POLYMERIC FILM, INTERIOR QUALITY, SUPPORTED PLUS FOAM LAMINATE AND/OR BACKING MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M8P3-E1
- FORD WSS-M8P3-E3-2014 PERFORMANCE, FLEXIBLE POLYMERIC FILM, INTERIOR QUALITY, SUPPORTED PLUS FOAM LAMINATE AND/OR BACKING MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M8P3-E1)
- FORD WSS-M4D873-A3-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 20% MINERAL FILLED, LOW THERMAL EXPANSION, HIGH IMPACT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D906-B2-2012 ACRYLONITRILE BUTADIENE STYRENE (ABS) EXTRUSION MOLDING COMPOUND, MEDIUM HEAT RESISTANT, EXTERIOR, PAINTED APPLICATIONS ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D695-A-2010 POLYETHYLENE (PE), MOLDING COMPOUND, HIGH DENSITY, LOW MELT FLOW RATE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D644-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER, 40% MINERAL MIX FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D931-A1-2011 POLYETHYLENE, HIGH DENSITY (PE-HD), 25% MICA FILLED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D702-A-2012 ACETAL (POM) COPOLYMER, MINERAL OIL IMPREGNATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M99J265-A-2012 PAINT, COLOR COAT POLYPROPYLENE - INTERIOR, BAKING ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M1A345-A2-2013 STEEL, SHEET, COLD ROLLED, LOW CARBON, IMPROVED FORMABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A345-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A345-A4-2013 STEEL, SHEET, COLD ROLLED, LOW CARBON, EXTRA HIGH FORMABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A345-A1; No direct replacement, use CBP strategy)
- FORD WSS-M2A175-A4-2013 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, ENERGY ABSORPTION ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A175-A1
- FORD WSS-M2P189-A61-2009 PLATING PERFORMANCE, 60 CYCLES APG/APG''''E'''' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P189-A62-2009 PLATING PERFORMANCE, 60 CYCLES APG/APG''''E'''' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P189-A63-2009 PLATING PERFORMANCE, 60 CYCLES APG/APG''''E'''' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P189-A64-2009 PLATING PERFORMANCE, 60 CYCLES APG/APG''''E'''' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P189-A65-2009 PLATING PERFORMANCE, 60 CYCLES APG/APG''''E'''' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P189-A66-2009 PLATING PERFORMANCE, 60 CYCLES APG/APG''''E'''' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M1A341-A3-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A341-A4-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A341-A5-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A341-A6-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A341-A7-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A341-A8-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A341-A9-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A341-A10-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A346-A2-2013 STEEL, SHEET, HOT ROLLED HSLA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A346-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A346-A3-2013 STEEL, SHEET, HOT ROLLED HSLA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A346-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A346-A4-2013 STEEL, SHEET, HOT ROLLED HSLA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A346-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A346-A5-2013 STEEL, SHEET, HOT ROLLED HSLA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A346-A1; No direct replacement, use CBP strategy)
- FORD WSS-M1A346-A6-2013 STEEL, SHEET, HOT ROLLED HSLA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A346-A1; No direct replacement, use CBP strategy)
- FORD ESK-M99J325-A-2012 ADDITIVE FOR WATERBORNE PAINT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D891-A1-2010 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D733-A3-2010 ETHYLENE VINYL ACETATE (E/VAC) COPOLYMER MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D733-A4-2010 ETHYLENE VINYL ACETATE (E/VAC) COPOLYMER MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D882-A1-2011 ACETAL (POM) COPOLYMER, 10 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D556-A8-2011 POLYPROPYLENE (PP) COPOLYMER, 22% MINERAL FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D936-A1-2012 POLYPROPYLENE (PP) COPOLYMER, 30 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M5H50-A10-2021 LAMINATE, POLYESTER FABRIC, MOOREA PATTERN, PILE WARP KNIT, 100% VIRGIN ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P188-A1-2011 PAINT PERFORMANCE, PLASTIC SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P187-A1-2010 PAINT PERFORMANCE, WATER BASED, AUTODEPOSITED, NON VISIBLE INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P189-A11-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P189-A12-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P189-A13-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P189-A14-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P189-A15-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P189-A1)
- FORD WSS-M2P189-A16-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P189-A1)
- FORD WSS-M4D732-B7-2014 POLYPROPYLENE (PP) COPOLYMER, 30% GLASS FIBER FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D732-B2)
- FORD WSS-M4D732-B7-2021 POLYPROPYLENE (PP) COPOLYMER, 30% GLASS FIBER FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D732-B2)
- FORD WSS-M2A175-A2-2013 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, HIGH STRENGTH, THICK GAGE ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A175-A1
- FORD WSS-M2A175-A2-2015 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, HIGH STRENGTH, THICK GAGE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A175-A1)
- FORD WSS-M4D1005-A2-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, 22% MINERAL FILLED, FULLY PAINTED ONLY, MOLDING COMPOUND, FASCIA / THIN-WALLED EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M4D1005-A1
- FORD ESB-M2P106-A-2010 PAINT QUALITY, EPOXY COATING - RUSTLESS STEEL SCREWS - BLACK ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D918-A-2010 POLYPHENYLENE SULFIDE (PPS), 33% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D892-A1-2010 POLYAMIDE 12 (PA12), HEAT STABILIZED 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D865-A2-2010 POLYPROPYLENE (PP) HOMOPOLYMER, 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D993-B1-2011 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D962-A-2011 THERMOPLASTIC POLYESTER ELASTOMERIC MOLDING COMPOUND, 20% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D744-A-2011 ACETAL (POM) HOMOPOLYMER, UV STABILIZED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D955-B-2011 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND, NON VISIBLE EXTERIOR / UNDERBODY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D1016-A1-2011 POLYAMIDE (PA) 6,6 HEAT STABILIZED 25% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D674-A2-2011 POLYAMIDE (PA) 6, HEAT STABILIZED, 60% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D1011-A1-2011 POLYAMIDE (PA) 6, HEAT STABILIZED, 10% GLASS REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D799-A-2012 POLYETHYLENE (PE), MEDIUM DENSITY, LOW MELT FLOW RATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D1019-A1-2012 POLYAMIDE (PA) 66, HEAT STABILIZED, 15%GLASS FIBER REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M6J106-B-2012 PRIMER SURFACER, HIGH GLOSS, FIBERGLASS REINFORCED POLYESTER PLASTICS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD ESB-M6J106-A
- FORD WRS-M1H1158-B1-2014 FABRIC, CALDER EU PATTERN, FLAT WOVEN 38% PIR/PCR, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WRS-M1H1158-A1)
- FORD ESF-M70J1-A-2011 PAINT, POWDERED, THERMOSETTING EPOXY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M2D460-A-2013 POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSL-M99D60-A1-2013 POLYVINYL CHLORIDE (PVC) COPOLYMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D648-B1-2014 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD S-M3D1008-A-2005 MOLDING COMPOUND, MELAMINE PHENOLIC ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P170-B1-2013 PAINT PERFORMANCE, METAL SUBSTRATES, HEAT RESISTANT COATING, LOW VISIBILITY, 250 °C, max ***TO BE USED WITH FORD WSS-M99P1111-A*** (Includes FORD WSS-M2P170-B2 - B7)
- FORD WSS-M16J20-A2-2014 PAINT, TWO COMPONENT ELASTOMERIC BASECOAT/CLEARCOAT OVER FLEXIBLE SUSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M16J20-A1)
- FORD WSS-M16J20-A2-2021 PAINT, TWO COMPONENT ELASTOMERIC BASECOAT/CLEARCOAT OVER FLEXIBLE SUSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M16J20-A1)
- FORD WSB-M1A215-F1-2013 STEEL, SHEET, COLD ROLLED HSLA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSB-M1A215-E1; No direct replacements use CBP strategy)
- FORD WSS-M1A347-A2-2013 STEEL, SHEET, COLD ROLLED HSLA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A347-A1; No direct replacements, use CBP strategy)
- FORD WSS-M1A347-A3-2013 STEEL, SHEET, COLD ROLLED HSLA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A347-A1; No direct replacements, use CBP strategy)
- FORD WSS-M1A347-A4-2013 STEEL, SHEET, COLD ROLLED HSLA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A347-A1; No direct replacements, use CBP strategy)
- FORD WSS-M1A347-A5-2013 STEEL, SHEET, COLD ROLLED HSLA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A347-A1; No direct replacements, use CBP strategy)
- FORD WSS-M1A347-A6-2013 STEEL, SHEET, COLD ROLLED HSLA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A347-A1; No direct replacements, use CBP strategy)
- FORD WSS-M2P180-C-2007 PAINT PERFORMANCE, RIGID SUBSTRATES, EXTERIOR- ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P181-C-2007 PAINT PERFORMANCE, FLEXIBLE SUBSTRATES, EXTERIOR - ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P180-D-2012 PAINT PERFORMANCE, RIGID SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P181-C-2014 PAINT PERFORMANCE, FLEXIBLE SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P180-D-2014 PAINT PERFORMANCE, RIGID SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M2P137-A1-2010 PAINT PERFORMANCE, ENGINES, AND ENGINE ACCESSORIES, 24 h SALT SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M2P137-A2-2010 PAINT PERFORMANCE, ENGINES, AND ENGINE ACCESSORIES, 48 h SALT SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M2P137-A3-2010 PAINT PERFORMANCE, ENGINES, AND ENGINE ACCESSORIES, 96 h SALT SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P185-A6-2010 PAINT PERFORMANCE, ENGINES, NON-METALLIC SUBSTRATES, HIGH PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P185-A1)
- FORD WSS-M2P185-A7-2010 PAINT PERFORMANCE, ENGINES, NON-METALLIC SUBSTRATES, STANDARD PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P185-A1)
- FORD WSS-M2P185-A8-2010 PAINT PERFORMANCE, ENGINES, NON-METALLIC SUBSTRATES, MIN PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P185-A1)
- FORD WSS-M2P170-B3-2013 PAINT PERFORMANCE, METAL SUBSTRATES, HEAT RESISTANT COATING, LOW VISIBILITY, 450 °C, max ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P170-B1)
- FORD WSS-M2P170-B5-2013 PAINT PERFORMANCE, METAL SUBSTRATES, HEAT RESISTANT COATING, LOW VISIBILITY, 650 °C, max ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P170-B1)
- FORD WSS-M2P170-B7-2013 PAINT PERFORMANCE, METAL SUBSTRATES, HEAT RESISTANT COATING, HIGH VISIBILITY, 450°C, max ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P170-B1)
- FORD WSD-M1A333-A2-2013 STEEL, SHEET, COLD ROLLED, LOW CARBON ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M1A333-A1; No direct replacements, use CBP strategy)
- FORD WSB-M4D766-A-2010 POLYETHYLENE TEREPHTHALATE (PET), 35% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M15P42-A-2013 PERFORMANCE, CHILD SEAT LINER, FABRIC - FOAM LAMINATED COMPOSITE WITH HOT STAM, LABEL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D623-A2-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D823-B1-2011 POLYAMIDE (PA66), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M5H23-A-2013 LAMINATE, POLYESTER FABRIC, POLYURETHANE FOAM PRISMATIC PATTERN, KNIT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M5H42-A1-2014 LAMINATE, POLYESTER FABRIC, POLYURETHANE FOAM, CHINA PRISM HD PATTERN, KNIT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M5H40-B5-2021 LAMINATE, POLYESTER FABRIC, POLYESTER BACKING LYRIC HD (HEAVY DUTY) PATTERN, KNIT, 100% VIRGIN ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M70J4-A-2011 PAINT, POWDERED, THERMOSETTING EPOXY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSA-M70J9-A-2011 PAINT, POWDERED, THERMOSETTING POLYESTER ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M6J60-A-2012 PRIMER, PLASTISOL, ADHESIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D666-A-2014 POLYAMIDE 66 (PA66), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M16J8-A-2012 CLEAR TOPCOAT, ABRASION RESISTANT, TRANSPARENT PLASTIC PARTS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M99G102-B-2012 PLASTISOL COATING, ACOUSTICAL SOUND BARRIER ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M18P4-A-2014 FRP FILLER, REPAIR KIT - PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D941-A1-2012 POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER/MICA REINFORCED MOLDING COMPOUND, LUBRICATED AND HEAT STABILIZED WITH 25% MINIMUM RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P170-B2-2013 PAINT PERFORMANCE, METAL SUBSTRATES, HEAT RESISTANT COATING, MODERATE VISIBILITY, 250 °C, max ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P170-B1)
- FORD WSS-M2P170-B4-2013 PAINT PERFORMANCE, METAL SUBSTRATES, HEAT RESISTANT COATING, MODERATE VISIBILITY, 450 °C, max ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P170-B1)
- FORD WSS-M2P170-B6-2013 PAINT PERFORMANCE, METAL SUBSTRATES, HEAT RESISTANT COATING, MODERATE VISIBILITY, 650°C, max ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P170-B1)
- FORD ESA-M4D465-A1-2011 TUBING, PTFE - GLASS SPHERE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M3B83-A1-2014 PRETREATMENT SOLUTION, ALUMINUM SUBSTRATE, DEOXODIZER ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESF-M4D405-B-2011 POLYETHYLENE TEREPHTHALATE (PET), 45 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESF-M4D405-C1-2011 POLYETHYLENE TEREPHTHALATE (PET), 30 % GLASS REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D644-A4-2011 POLYPROPYLENE (PP) HOMOPOLYMER, 40% MINERAL MIX FILLED HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D664-B1-2011 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2F217-A1-2021 FABRIC, VINYL COATED (PVC), SUPPORTED, ANTI-SQUEAK, GAP HIDER MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WRS-M4D1064-A1-2021 POLYPROPYLENE (PP) HOMOPOLYMER, 10% GLASS BEAD / GLASS FIBER, REINFORCED MOLDING COMPOUND, 50% RECYCLED MATERIAL BY WEIGHT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WRS-M4D1064-A2-2021 POLYPROPYLENE (PP) HOMOPOLYMER AND COPOLYMER, IMPACT MODIFIED, UV STABILIZED, 10% GLASS BEAD / GLASS FIBER, REINFORCED MOLDING COMPOUND, EXTERIOR, 50% RECYCLED MATERIAL BY WEIGHT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WRS-M4D1064-A1)
- FORD WSS-M15J15-A2-2020 PAINT, TWO COMPONENT COLOR COAT FOR PLASTIC, INTERIOR SOFT TOUCH, METALLIC ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M15J15-A1)
- FORD WSS-M1F29-B2-2021 LEATHER, GENUINE, SEATING, PREMIUM, ADVANCED DENIM DYE BARRIER TOP COAT, CHROME ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1F29-B)
- FORD WSS-M98P13-E-2015 EXTERIOR PLASTIC PERFORMANCE, MOLD-IN-COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P13-C-2014 EXTERIOR PLASTIC PERFORMANCE, MOLD-IN-COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P13-D-2015 EXTERIOR PLASTIC PERFORMANCE, MOLD-IN-COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M98P13-F-2021 EXTERIOR PLASTIC PERFORMANCE, MOLD-IN-COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M5P8-A-2011 METALLIZE PLASTIC PARTS - REFLECTORS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M5P8-B1-2011 LIGHTING METALIZATION, PLASTIC SUBSTRATES ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M2G357-A-2015 PRIMER, ADHESION, PLASTIC TRIM SURFACES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M1H1357-A10-2021 ASCENT FABRIC, ASCENT PATTERN, JACQUARD WOVEN, 100% VIRGIN ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P177-C2-2010 PAINT PERFORMANCE, METAL SUBSTRATES, MODERATE VISIBILITY, 6 WEEK RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M15J14-A2-2020 PAINT, TWO COMPONENT COLOR COAT FOR PLASTIC, INTERIOR, HARD COAT, METALLIC ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M15J14-A1)
- FORD WRS-M4D483-D2-2015 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND, RECYCLED, 100% PIR RESIN CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D483-D1)
- FORD WSS-M4D833-A2-2011 ACRYLONITRILE STYRENE ACRYLATE (ASA) MOLDING COMPOUND, EXTERIOR HIGH GLOSS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D841-A4-2011 POLYPROPYLENE (PP) COPOLYMER, 11 - 17% MINERAL FILLED, HIGH MELT FLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M4D330-A5-2011 IONOMER (ETHYLENE) MOLDING COMPOUND, FOAMED GLASS FILLED - BLACK - ZINC/SODIUM TYPE EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D623-A-2011 POLYPHENYLENE ETHER + POLYAMIDE (PPE+PA) BLEND MOLDING COMPOUND, IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D891-A2-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA), HIGH FLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D578-B1-2011 POLYAMIDE (PA) 6, HEAT STABILIZED, IMPACT MODIFIED, 35% GLASS REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSD-M1A333-A3-2013 STEEL, SHEET, COLD ROLLED, LOW CARBON, HIGH FORMABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M1A333-A1; No direct replacements, use CBP strategy)
- FORD WSD-M1A333-A4-2013 STEEL, SHEET, COLD ROLLED, LOW CARBON, EXTRA HIGH FORMABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M1A333-A1; No direct replacements, use CBP strategy)
- FORD WSS-M1A341-A1-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (No direct replacement, use CBP strategy)
- FORD ESA-M2P165-A-2003 PAINT PERFORMANCE, TWO COAT SYSTEM, TUBING ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2P190-A-2013 PAINT PERFORMANCE, INTERIOR PARTS METAL SUBSTRATES ***TO BE USED WITH FORD WSS-M99P1111-A***
Taiwan Provincial Standard of the People's Republic of China, ford pa6 material
Professional Standard - Agriculture, ford pa6 material
- 农业农村部公告第197号-7-2019 Determination of formoterol and arformoterol in feed by liquid chromatography-tandem mass spectrometry
Society of Automotive Engineers (SAE), ford pa6 material
- SAE CPFD2_17FFUSION-2016 J1349 Certified Power Engine Data for Ford as used in 2017 Ford Fusion Regular Fuel - Level 2
- SAE CPFD1_17FFUSION-2016 J1349 Certified Power Engine Data for Ford as used in 2017 Ford Fusion Regular Fuel - Level 1
- SAE CPFD2_13FFLEX-2012 J1349 Certified Power Engine Data for Ford 3.5L as used in 2013 Ford Flex - Regular Fuel 91 RON - Level 2
- SAE CPFD1_13FFLEX-2012 J1349 Certified Power Engine Data for Ford 3.5L as used in 2013 Ford Flex - Regular Fuel 91 RON - Level 1
RU-GOST R, ford pa6 material
- GOST R 53060-2008 Social service of the population. Documentation of social service establishments
Electrostatic Discharge Association (ESDA), ford pa6 material
British Standards Institution (BSI), ford pa6 material
- BS 6404-8.1:2001 Magnetic materials - Individual materials - Magnetically hard materials
- BS EN 60404-8-1:2015 Magnetic materials. Specifications for individual materials. Magnetically hard materials
- BS EN 16245-5:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for core materials
- BS EN 16245-4:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fabrics
SG-SPRING SG, ford pa6 material
- SS 5 Pt.B11-1987 Methods Of Test For Paints, Varnishes And Related Materials Part B11: Determination Of Viscosity By Ford Viscosity Cup
Jilin Provincial Standard of the People's Republic of China, ford pa6 material
- DB22/T 1696-2012 Determination of Arformoterol in Feed by Liquid Chromatography-Mass Spectrometry/Mass Spectrometry
ESD - ESD ASSOCIATION, ford pa6 material
- ESD DS7.1:1992 REVISED - Floor Materials - Resistive Characterization of Materials
- S7.1-2005 Resistive Characterization of Materials
Danish Standards Foundation, ford pa6 material
- DS/EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
Association Francaise de Normalisation, ford pa6 material
- NF EN 16245-5:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 5 : exigences particulières pour les matériaux d'âme
- NF T57-120-5*NF EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: specific requirements for core materials
- NF EN 60404-8-1:2015 Matériaux magnétiques - Partie 8-1 : spécifications pour matériaux particuliers - Matériaux magnétiquement durs
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), ford pa6 material
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., ford pa6 material