ZH

RU

ES

Conductivity en value

Conductivity en value, Total:498 items.

In the international standard classification, Conductivity en value involves: Conducting materials, Water quality, Analytical chemistry, Pulps, Paper and board, Soil quality. Pedology, Hydraulic energy engineering, Semiconductor devices, Linear and angular measurements, Construction materials, Insulating fluids, Road vehicles in general, Electrical wires and cables, Electricity. Magnetism. Electrical and magnetic measurements, Sugar. Sugar products. Starch, Internal combustion engines for road vehicles, Radiocommunications, Electromagnetic compatibility (EMC), Fuels, Non-ferrous metals, Medical equipment, Protection against fire, Fertilizers, Pipeline components and pipelines, Products of non-ferrous metals, Plastics, Electrical and electronic testing, Testing of metals, Geology. Meteorology. Hydrology, Organic chemicals, Installations in buildings, Electronic components in general, Thermodynamics and temperature measurements, Surface treatment and coating, Electrical accessories, Test conditions and procedures in general, Continuous handling equipment, Energy and heat transfer engineering in general, Rubber, Safety of machinery, Paints and varnishes, Power stations in general, Materials for aerospace construction, Kitchen equipment, Optoelectronics. Laser equipment, Vocabularies, Electrical engineering in general, Aerospace electric equipment and systems, Non-destructive testing, Ferroalloys, Paint ingredients, Photography, Meat, meat products and other animal produce, Farming and forestry, Telecommunication systems, Flexible drives and transmissions, Iron and steel products, Adhesives, Raw materials for rubber and plastics, Fasteners, Wind turbine systems and other alternative sources of energy, Electronic tubes, Fuel cells, Resistors, Refractories, Solar energy engineering, Non-metalliferous minerals, Switchgear and controlgear, Printed circuits and boards, Reinforced plastics, Protection of and in buildings, Integrated circuits. Microelectronics, HEALTH CARE TECHNOLOGY, Mechanical testing, Metrology and measurement in general, Semiconducting materials.


German Institute for Standardization, Conductivity en value

  • DIN EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies (IEC 61788-16:2013); German version EN 61788-16:2013
  • DIN EN 2853:2006-10 Aerospace series - Current ratings for electrical cables with conductor EN 2083; German and English version EN 2853:2005
  • DIN EN 27888:1993 Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993
  • DIN 53779:1979 Determination of the electric conductivity and the specific resistance (resistivity) of aqueous extracts
  • DIN EN 4426:2020-05 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of conductivity and pH of aqueous extracts; German and English version EN 4426:2020
  • DIN EN 13038:2012 Soil improvers and growing media - Determination of electrical conductivity; German version EN 13038:2011
  • DIN EN ISO 8031:2010 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009); German version EN ISO 8031:2009
  • DIN EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999
  • DIN EN ISO 3915:2022-05 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022); German version EN ISO 3915:2022
  • DIN 10753:2021-06 Analysis of honey - Determination of electrical conductivity
  • DIN EN 60754-2:2015 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity (IEC 60754-2:2011); German version EN 60754-2:2014
  • DIN EN 61788-11:2012 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb<(Index)3>Sn composite superconductors (IEC 61788-11:2011); German version EN 61788-11:2011
  • DIN EN 61788-4:2012 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2011); German version EN 61788-4:2011
  • DIN EN 61788-4:2008 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2007); German version EN 61788-4:2007
  • DIN EN ISO 284:2013 Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012); German version EN ISO 284:2012
  • DIN 10753:2021 Analysis of honey - Determination of electrical conductivity
  • DIN EN 27888:1993-11 Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993
  • DIN EN ISO 15091:2020-05 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019); German version EN ISO 15091:2020
  • DIN EN 4426:2020 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of conductivity and pH of aqueous extracts; German and English version EN 4426:2020
  • DIN EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures; German version EN 10314:2016
  • DIN EN 60754-2:2021 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity (IEC 60754-2:2011 + A1:2019); German version EN 60754-2:2014 + A1:2020
  • DIN EN IEC 61788-7:2021 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies (IEC 61788-7:2020); German version EN IEC 61788-7:2020
  • DIN EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021); German and English version prEN ISO 3915:2021
  • DIN EN ISO 8031:2020 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020); German version EN ISO 8031:2020
  • DIN EN 61173:1996 Overvoltage protection for photovoltaic (PV) power generating systems - Guide (IEC 61173:1992); German version EN 61173:1994
  • DIN EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019)
  • DIN EN 61338-1-5:2016-04 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency (IEC 61338-1-5:2015); German version EN 6...
  • DIN EN 60746-3:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity (IEC 60746-3:2002 + Corrigendum 2002); German version EN 60746-3:2002
  • DIN EN 50267-2-3:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of material from cables - Part 2-3: Procedures; determination of degree of acidity of gases for cables by determination of the weighted average of pH and condu
  • DIN EN 13604:2013-09 Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper; German version EN 13604:2013
  • DIN EN 61788-17:2013 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films (IEC 61788-17:2013); German version EN 61788-17:2013
  • DIN EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014); German version EN ISO 22007-6:2015

British Standards Institution (BSI), Conductivity en value

  • 22/30461582 DC BS EN 673. Glass in building. Determination of thermal transmittance (U value). Calculation method
  • 21/30427395 DC BS EN ISO 3915. Plastics. Measurement of resistivity of conductive plastics
  • BS IEC 62951-2:2019 Semiconductor devices. Flexible and stretchable semiconductor devices - Evaluation method for electron mobility, sub-threshold swing, and threshold voltage of flexible devices
  • 19/30390197 DC BS EN 61788-23. Superconductivity. Part 23. Residual resistance ratio measurement. Residual resistance ratio of Nb superconductors
  • 19/30402599 DC BS EN IEC 61788-23. Superconductivity. Part 23. Residual resistance ratio measurement. Residual resistance ratio of Nb superconductors
  • 13/30276628 DC BS EN 62704-3. Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz. Part 3. Specific Requirements for using the Finite-Difference Time-Domain (FDTD) Method for SAR C...
  • 18/30370111 DC BS EN 61788-7. Superconductivity. Part 7. Electronic characteristic measurements. Surface resistance of superconductors at microwave frequencies
  • BS EN 61788-4:2007 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • BS EN 61788-11:2003 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
  • 23/30473276 DC BS EN IEC 61788-23. Superconductivity - Part 23. Residual resistance ratio measurement. Residual resistance ratio of cavity-grade Nb superconductors
  • 20/30376386 DC BS EN ISO 23331. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for total electrical conductivity of conductive fine ceramics
  • BS EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
  • BS EN 27888:1993 Water quality. Method for the determination of electrical conductivity
  • 19/30359451 DC BS EN ISO 17409. Electrically propelled road vehicles. Conductive power transfer. Safety requirements
  • 21/30421959 DC BS EN ISO 10545-18. Ceramic tiles. Part 18. Determination of Light Reflectance Value (LRV)
  • 17/30356882 DC BS EN 55011 AMD2. Requirements for semiconductor power converters (SPC)
  • 23/30445047 DC BS EN ISO 10077-2 AMD 1. Thermal performance of windows, doors and shutters. Calculation of thermal transmittance - Part 2. Numerical method for frames
  • BS 3839:1978 Specification for oxygen-free high-conductivity copper for electronic tubes and semiconductor devices
  • 14/30302407 DC BS EN 60895. Live working. Conductive clothing
  • 13/30276624 DC BS EN 62704-1. Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz. Part 1. General Requirements for using the Finite Difference Time Domain...
  • BS EN 4426:2020 Aerospace series. Non-metallic materials. Textiles. Test method. Determination of conductivity and pH of aqueous extracts
  • 21/30446642 DC BS EN 60228. Conductors of insulated cables
  • BS EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
  • 23/30472390 DC BS EN 60747-16-11 Semiconductor devices - Part 16-11. Microwave integrated circuits - Power detectors
  • 19/30402638 DC BS EN 4703. Aerospace series. Test specification for verification of the permeability of electrical insulation under variable pressure conditions
  • BS EN 61788-7:2002 Superconductivity - Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • BS EN 61788-7:2007 Superconductivity - Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • BS EN 60746-3:2002 Expression of performance of electrochemical analyzers - Electrolytic conductivity
  • 23/30465226 DC BS EN ISO 22007-1. Plastics. Determination of thermal conductivity and thermal diffusivity - Part 1. General principles
  • BS EN 2853:2005 Current ratings for electrical cables with conductor EN 2083
  • 18/30347288 DC BS EN IEC/IEEE 62704-4. Recommended practice for determining the Peak Spatial Average Specific Absorption Rate (SAR) in the human body from wireless communications devices, 30 MHz - 6 GHz. Part 4. General requirements for using the Finite-Element Metho...
  • BS EN ISO 284:2012 Conveyor belts. Electrical conductivity. Specification and test method
  • 21/30434332 DC BS EN 63373. Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices
  • 20/30405217 DC BS EN IEC 62047-40. Semiconductor devices. Micro-electromechanical devices. Part 40. Test methods of Micro-electromechanical inertial shock switch threshold
  • 21/30436977 DC BS EN IEC 61788-22-3. Superconductivity. Part 22-3. Superconducting strip photon detector. dark count rate
  • BS EN ISO 3915:2022 Tracked Changes. Plastics. Measurement of resistivity of conductive plastics
  • 23/30466777 DC BS EN ISO 22007-4. Plastics. Determination of thermal conductivity and thermal diffusivity - Part 4. Laser flash method
  • PD CLC/TS 61400-14:2017 Wind turbines. Declaration of apparent sound power level and tonality values
  • 15/30303537 DC BS EN ISO 10545-16. Ceramic tiles. Part 16. Determination of small colour differences and light reflectance values
  • BS EN IEC 61788-7:2020 Superconductivity - Electronic characteristic measurements. Surface resistance of high-temperature superconductors at microwave frequencies
  • BS EN 61788-16:2013 Superconductivity. Electronic characteristic measurements. Power-dependent surface resistance of superconductors at microwave frequencies
  • 22/30455609 DC BS EN 4703. Aerospace series. Test specification for verification of insulation permeability
  • BS EN ISO 14683:2017 Tracked Changes. Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
  • 22/30443678 DC BS EN 60749-34-1. Semiconductor devices. Mechanical and climatic test methods - Part 34-1. Power cycling test for power semiconductor module
  • BS EN 61788-7:2006 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • 20/30407015 DC BS EN 60034-9. Rotating electrical machines. Part 9. Noise limits
  • BS ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity

American Society for Testing and Materials (ASTM), Conductivity en value

  • ASTM D5464-93(2001) Standard Test Methods for pH Measurement of Water of Low Conductivity
  • ASTM D5464-16 Standard Test Method for pH Measurement of Water of Low Conductivity
  • ASTM D5128-14 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
  • ASTM D5464-07 Standard Test Method for pH Measurement of Water of Low Conductivity
  • ASTM D5464-11 Standard Test Method for pH Measurement of Water of Low Conductivity
  • ASTM D1125-23 Standard Test Methods for Electrical Conductivity and Resistivity of Water
  • ASTM D4399-05 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
  • ASTM D4496-21 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
  • ASTM C1876-19 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
  • ASTM D2739-97 Standard Test Method for Volume Resistivity of Conductive Adhesives
  • ASTM B193-02 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-00 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-01 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM E1004-99 Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
  • ASTM B193-87(1992) Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-19 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-87 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-20 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM D4399-05(2023) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
  • ASTM B193-02(2008) Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-02(2014) Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM B193-16 Standard Test Method for Resistivity of Electrical Conductor Materials
  • ASTM D5391-23 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
  • ASTM D1125-95(2005) Standard Test Methods for Electrical Conductivity and Resistivity of Water
  • ASTM D1125-14 Standard Test Methods for Electrical Conductivity and Resistivity of Water
  • ASTM D1125-95(2009) Standard Test Methods for Electrical Conductivity and Resistivity of Water
  • ASTM D5568-14 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
  • ASTM B342-63(1980)e1 Test Method for Electrical Conductivity by Use of Eddy Currents
  • ASTM F1896-10 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
  • ASTM D2739-97(2017) Standard Test Method for Volume Resistivity of Conductive Adhesives
  • ASTM D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM E1004-02 Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
  • ASTM D2739-97(2004) Standard Test Method for Volume Resistivity of Conductive Adhesives
  • ASTM D2739-97(2010) Standard Test Method for Volume Resistivity of Conductive Adhesives
  • ASTM E1004-09 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
  • ASTM B5-00 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
  • ASTM B5-00(2005) Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes

American National Standards Institute (ANSI), Conductivity en value

  • ANSI/TAPPI T252 om-2012 pH and electrical conductivity of hot water extracts of pulp, paper, and paperboard
  • ANSI/EIA 364-54A:1999 Magnetic Permeability Test Procedure for Electrical Connectors, Contacts and Sockets
  • ANSI/ASTM D4496:2013 New Standard Test Method for DC Resistance or Conductance of Moderately Conductive Materials
  • ANSI/TIA/EIA 455-128-1996 Procedures for Determining Threshold Current of Semiconductor Lasers
  • ANSI/ASTM D2624:2009 Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
  • ANSI/IEEE 1302:2008 Guide for the Electromagnetic Characterisation of Conductive Gaskets in the Frequency Range of DC to 18 GHz

RU-GOST R, Conductivity en value

  • GOST 26423-1985 Soils. Methods for determination of specific electric conductivity, pH and solid residue of water extract
  • GOST 18986.13-1974 Semiconductor tunnel diodes. Methods for measuring peak point current, valley point current, peak point voltage, valley point voltage, projected peak point voltage
  • GOST R 53120-2008 Honey. Method for determination of electroconductivity
  • GOST R IEC 60754-2-1999 Tests of materials from cables during combustion. Determination of degree of evolved gases by measuring pH and conductivity
  • GOST IEC 60754-2-2011 Tests of materials from cables during combustion. Determination of degree of evolved gases acidity by measuring pH and conductivity
  • GOST 31770-2012 Honey. Method for determination of electroconductivity
  • GOST IEC 60754-2-2015 Test on gases evolved during combustion of materials from cables. Part 2. Determination of acidity (by pH measurement) and conductivity
  • GOST 25183.7-1982 Photographic gelatine. Method of determination of specific electroconductivity
  • GOST 18986.16-1972 Rectifier diodes. Methods of measuring average forward voltage and average reverse current
  • GOST R 50471-1993 Semiconductor photoemitters. Measuring method for halfintensity angle
  • GOST ISO 284-2017 Conveyor belts. Requirement to electrical conductivity and method for determination
  • GOST 8.457-2000 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring specific conductivity of liguids
  • GOST 8.457-1982 State system for ensuring the uniformity of measurements. State primary standards and state verification schedule for means of measuring specific conductivity of solutions of electrolytes within the range of 1kh10 in minus 4 degree to 1kh10 in 2 degree S

ES-UNE, Conductivity en value

  • UNE-EN 2853:2005 Aerospace series - Current ratings for electrical cables with conductor EN 2083 (Endorsed by AENOR in December of 2005.)
  • UNE-EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
  • UNE-EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019)
  • UNE-EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies (Endorsed by AENOR in May of 2013.)
  • UNE-EN 4426:2020 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of conductivity and pH of aqueous extracts (Endorsed by Asociación Española de Normalización in April of 2020.)

VN-TCVN, Conductivity en value

Professional Standard - Water Conservancy, Conductivity en value

  • SL 78-1994 Determination of conductivity (Conductivity instrument method)

CL-INN, Conductivity en value

AT-ON, Conductivity en value

  • ONORM B 6015 Teil.5-1990 Determination of thermal conductivity by the guarded hot plate apparatus; determination of the nominal value of the thermal conductivity for insulation materials
  • ONORM B 6015-6-1992 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the nominal value of the thermal conductivity for mineralic building materials
  • ONORM M 6241-1988 Water quality; determination of electrica! conductivity
  • ONORM EN 27888-1993 Water quality. Determination of electrical conductivity (ISO 7888:1985)
  • OENORM EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021)
  • ONORM E 3654-1993 Test on gases evolved during the combustion of materials from cables - Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity (IEC 754-2:1991, modified)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Conductivity en value

  • GB 18613-2020(英文版) Minimum allowable values of energy efficiency and values of efficiency grades for motors
  • GB/T 11007-1989 Test method of electric conductivity analyzers
  • GB/T 11007-2008 Test method of electrolytic conductivity analyzers
  • GB/T 18932.15-2003 Method for the determination of electrical conductivity in honey
  • GB/T 23246-2009 Conductivity-temperature-depth profiler
  • GB 5839-1986 Rating system for electron tubes and semiconductor devices
  • GB/T 5839-1986 Rating systems for electronic tubes and semiconductor devise
  • GB 6950-2001 Safe rest conductivity of light fuel oil
  • GB 6950-2001/XG1-2008 Light Oil Safety Static Conductivity
  • GB 6950-2001(XG1-2008) Light Oil Safety Static Conductivity
  • GB 12021.2-2008 The maximum allowable values of the energy consumption and energy efficiency grade for househole refrigerators
  • GB 12021.2-2003 The maximum allowable values of the energy consumption and energy efficiency grade for household refrigerators
  • GB/T 16906-1997 Standard test methods for electrical resistivity of antistatic coating in petroleum tanks
  • GB 25958-2010 Minimum allowable values of energy efficiency and values of efficiency grade for small-power motors
  • GB 12021.6-1989 The limited value and testing method of efficiency and warming energy consumption for automatic rice cookers
  • GB/T 15662-1995 Method of testing volume resistivity of conducting and antistatic plastics
  • GB/T 13580.3-1992 Determination of specific conductance in the wet precipitation
  • GB/T 12966-1991 The method for electrical conductivity measurement of aluminium alloys by use of eddy current
  • GB/T 12966-2008 The method for determining aluminum alloys conductivity using eddy current
  • GB/T 23977-2009 Dyestuffs.Determination of content of salt.Conductance method
  • GB 13580.3-1992 Method for Determination of Conductivity of Atmospheric Precipitation Water
  • GB/T 10715-1989 Antistatic endless V-belts--Electrical conductivity--Characteristic and method of test
  • GB 21456-2008 The minimum allowable values of the energy efficiency and energy efficiency grades for household induction cookers
  • GB 12021.4-2004 The maximum allowable values of the energy consumption and Energy efficiency grade for household electric washing machines
  • GB/Z 25425-2010 Declaration of apparent sound power level and tonality values for the wind turbine
  • GB/T 32184-2015 High conductivity aluminum alloy extruded flat rod and plate
  • GB/T 12582-1990 Liquid hydrocarbons--Determination of electrical conductivity--Precision meter
  • GB/T 32791-2016 Electromagnetic (eddy-current) examination method for electrical conductivity of copper and copper alloys
  • GB/T 27502-2011 Preparation method of reference solutions for the measurement of conductivity
  • GB 13421-1992 Limits of maximum permitted spurious emission power levels and methods of measurement for radio transmitters
  • GB/T 15738-1995 Test method of resistivity for fibre reinforced conducting and antistatic plastics
  • GB/T 15738-2008 Test method for resistivity of conducting and antistatic fiber reinforced plastics
  • GB/T 14114-1993 General principles of measuring methods of V/F and F/V converters for semiconductor integrated circuits
  • GB/T 32697-2016 Plastics.Phenol-formaldehyde.Determination of electrical conductivity of resin extracts
  • GB/T 6539-1997 Standard test methods for electrical conductivity of aviation and distillate fuels

SE-SIS, Conductivity en value

Professional Standard - Machinery, Conductivity en value

工业和信息化部/国家能源局, Conductivity en value

CZ-CSN, Conductivity en value

  • CSN 35 8106-1982 Resistors. Series of nominal power values
  • CSN 35 8746-1973 Semiconductor devices. Transistore. Measurement of absolute value of forward current transfer ratio and frequencies fT, fh21b, fh21e
  • CSN IEC 228A:1992 Conductors of insulated cables Guide to the dimensional limits of circular conductors
  • CSN 42 0475-1982 Metal testing. Determination of electric conductivity of metallurgical products
  • CSN 50 0332-1972 Paper sizing measurement by lectroconduotivity method
  • CSN 35 1602-1981 Power semiconductor devices. Ratings (limiting values) and characteristics
  • CSN 34 7021-2-1995 Test on gases evolved during the combustion of electric cables Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity

American Welding Society (AWS), Conductivity en value

  • WRC 357:1990 Calculation of Electrical and Thermal Conductivities of Metallurgical Plasmas

International Electrotechnical Commission (IEC), Conductivity en value

  • IEC 62951-2:2019 Semiconductor devices - Flexible and stretchable semiconductor devices - Part 2: Evaluation method for electron mobility, sub-threshold swing and threshold voltage of flexible devices
  • IEC TR 61000-1-4:2005 Electromagnetic compatibility (EMC) - Part 1-4: General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
  • IEC 60287:1982 Calculation of the continuous current rating of cables (100 % load factor)
  • IEC 61788-4:2001 Superconductivity - Part 4: Residual resistance ratio measurement; Residual resistance ratio of Nb-Ti composite superconductors
  • IEC 61788-11:2011 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb<(Index)3>Sn composite superconductors
  • IEC 61788-4:2007 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • IEC 61788-4:2011 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • IEC 61788-4:2016 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • IEC 60050-815:2000 International Electrotechnical Vocabulary - Part 815: Supraconductivity
  • IEC 60050-815:2015 International Electrotechnical Vocabulary - Part 815: Superconductivity
  • IEC 61788-11:2003 Superconductivity - Part 11: Residual resistance ratio measurement; Residual resistance ratio of Nb<(Index)3>Sn composite superconductors
  • IEC 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
  • IEC 60134:1961 System of limiting values of electronic tubes and valves and the adequate semiconductor devices
  • IEC 60746-3:2002/COR1:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity; Corrigendum 1
  • IEC 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
  • IEC 61788-7:2002 Superconductivity - Part 7: Electronic characteristic measurements; Surface resistance of superconductors at microwave frequencies
  • IEC 61788-7:2006 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies

International Telecommunication Union (ITU), Conductivity en value

Aerospace, Security and Defence Industries Association of Europe (ASD), Conductivity en value

  • ASD-STAN PREN 2853-1998 Aerospace Series Current Ratings for Electrical Cables with Conductor EN 2083 (Edition P 1)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Conductivity en value

  • PREN 2853-1993 Aerospace Series Current Ratings for Electrical Cables with Conductor EN 2083 (Revision 2)
  • PREN 4426-1998 Aerospace Series Textiles Test Method Determination of Conductivity and pH of Aqueous Extracts
  • PREN 4426-2001 Aerospace Series Non-Metallic Materials Textiles Test Method Determination of Conductivity and pH of Aqueous Extracts (Edition P 1)

ZA-SANS, Conductivity en value

  • SANS 6240:2002 Electric conductivity of fine aggregate
  • SANS 6240:2008 Electric conductivity of fine aggregate
  • SANS 2883:2003 Rubber, vulcanized - Antistatic and conductive products for industrial use - Electrical resistance limits
  • SANS 11853:2003 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity

WRC - Welding Research Council, Conductivity en value

  • BULLETIN 357-1990 CALCULATION OF ELECTRICAL AND THERMAL CONDUCTIVITIES OF METALLURGICAL PLASMAS

Professional Standard - Chemical Industry, Conductivity en value

  • HG 2-1047-1977 Electrophoretic Paint Conductivity Determination Method
  • HG/T 3335-1977 Electrophoretic Paint Conductivity Determination Method
  • HG/T 2905-1997 Plastics-phenolic resins-determination of electrical conductivity

KR-KS, Conductivity en value

国家市场监督管理总局、中国国家标准化管理委员会, Conductivity en value

  • GB/T 36980-2018 Energy consumption limits for electric vehicles
  • GB/T 12966-2022 The methods for determining aluminium and aluminium alloys conductivity using eddy current

Taiwan Provincial Standard of the People's Republic of China, Conductivity en value

  • CNS 686-1980 Testing Standard for Conductivity of Insulated Conductors
  • CNS 15111-2007 Methods of test for electrical conductivity and resistivity of water
  • CNS 10913-1984 Resistance and conductivity of copper materials for electrical purposes
  • CNS 13727-1996 Method of Test for Volume Resistivity of Conductive Adhesives
  • CNS 14639-2002 Methods of test for electric conductivity in highly purified water

Japanese Industrial Standards Committee (JISC), Conductivity en value

  • JIS H 7312:2007 Superconductivity -- Residual resistance ratio measurement -- Residual resistance ratio of Nb3Sn composite superconductors
  • JIS K 0112:1979 General rules for method of conductometric titration
  • JIS K 0400-13-10:1999 Water quality -- Determination of electrical conductivity
  • JIS H 0505:1975 Measuring methods for electrical resistivity and conductivity of non-ferrous materials
  • JIS K 0130:2008 General rules for electrical conductivity measuring method
  • JIS K 0552:1994 Testing methods for electric conductivity in highly purified water
  • JIS C 3666-2:2002 Test on gases evolved during combustion of electric cables -- Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
  • JIS H 7307:2005 Superconductivity -- Part 7: Electoronic characteristic measurements -- Surface resistance of superconductors at microwave frequencies
  • JIS H 7307:2010 Superconductivity -- Part 7: Electronic characteristic measurements -- Surface resistance of superconductors at microwave frequencies

HU-MSZT, Conductivity en value

International Organization for Standardization (ISO), Conductivity en value

  • ISO 7888:1985 Water quality; Determination of electrical conductivity
  • ISO 3915:1981 Plastics; measurement of resistivity of conductive plastics
  • ISO 3915:2022 Plastics — Measurement of resistivity of conductive plastics
  • ISO 11265:1994 Soil quality - Determination of the specific electrical conductivity
  • ISO 2878:2005 Rubber - Antistatic and conductive products - Determination of electrical resistance
  • ISO 15091:2019 Paints and varnishes — Determination of electrical conductivity and resistance
  • ISO 1853:1975 Conducting and antistatic rubbers; Measurement of resistivity
  • ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
  • ISO 2883:1980 Rubber, vulcanized; Antistatic and conductive products for industrial use; Electrical resistance limits
  • ISO 2878:1987 Rubber, vulcanized; Antistatic and conductive products; Determination of electrical resistance
  • ISO 284:1975 Title missing - Legacy paper document
  • ISO 284:2003 Conveyor belts - Electrical conductivity - Specification and test method
  • ISO 284:2012 Conveyor belts - Electrical conductivity - Specification and test method
  • ISO 284:1982 Conveyor belts; Electrical conductivity; Specification and method of test
  • ISO/CD 11265:2023 Environmental solid matrices — Determination of the specific electrical conductivity
  • ISO 2882:1979 Rubber, vulcanized; Antistatic and conductive products for hospital use; Electrical resistance limits

Association Francaise de Normalisation, Conductivity en value

  • NF T90-031*NF EN 27888:1994 Water quality - Determination of electrical conductivity.
  • NF EN 27888:1994 Qualité de l'eau - Détermination de la conductivité électrique
  • NF T51-080*NF EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics
  • NF C31-888-4:2012 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors.
  • NF ISO 11265:1995 Qualité du sol - Détermination de la conductivité électrique spécifique
  • NF T30-005*NF EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance
  • NF EN ISO 15091:2020 Peintures et vernis - Détermination de la conductivité et de la résistance électriques
  • NF L17-039*NF EN 4426:2020 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of conductivity and pH of aqueous extracts
  • NF EN 4426:2020 Série aérospatiale - Matériaux non-métallique - Textiles - Méthode d'essai - Détermination de la conductivité et du pH des extraits aqueux
  • NF EN 60754-2/A1:2020 Essai sur les gaz émis lors de la combustion des matériaux prélevés sur câbles - Partie 2 : détermination de la conductivité et de l'acidité (par mesure du pH)
  • NF EN 60754-2:2014 Essai sur les gaz émis lors de la combustion des matériaux prélevés sur câbles - Partie 2 : détermination de la conductivité et de l'acidité (par mesure du pH)
  • NF C31-888-16*NF EN 61788-16:2013 Superconductivity - Part 16 : electric characteristic measurements - Power dependent surface resistance of superconductors at microwave frequencies
  • NF X31-113*NF ISO 11265:1995 Soil quality. Determination of the specific electrical conductivity.
  • NF T47-135:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity.
  • NF C31-888-11:2003 Superconductivity - Part 11 : residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors.
  • NF C31-888-11:2011 Superconductivity - Part 11 : residual resistance ratio measurment - Residual resistance ratio of Nb3Sn composite superconductors.
  • NF ISO 1853:2019 Caoutchoucs vulcanisés ou thermoplastiques conducteurs et dissipatifs - Mesurage de la résistivité
  • NF T47-109*NF EN ISO 284:2013 Conveyor belts - Electrical conductivity - Specification and test method

National Metrological Verification Regulations of the People's Republic of China, Conductivity en value

Korean Agency for Technology and Standards (KATS), Conductivity en value

  • KS I ISO 7888:2007 Water quality-Determination of electrical conductivity
  • KS I ISO 7888-2007(2017) Water quality-Determination of electrical conductivity
  • KS I 8001-2009 General rules for electrical conductivity measuring method
  • KS C IEC 61000-1-4:2007 Electromagnetic compatibility(EMC)-Part 1-4:General-Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
  • KS M 0042-1999
  • KS D 0240-2010 Measuring methods for electrical resistivity and conductivity of non-ferrous metals
  • KS M ISO 3915:2002 Plastics-Measurement of resistivity of conductive plastics
  • KS M 3034-1980(2011) Test methods for electrical resistivity of conductive plastics
  • KS M ISO 3915-2002(2017) Plastics-Measurement of resistivity of conductive plastics
  • KS M ISO 3915-2002(2022) Plastics-Measurement of resistivity of conductive plastics
  • KS M 3034-1985 Test methods for electrical resistivity of conductive plastics
  • KS I ISO 11265:2005 Soil quality-Determination of the specific electrical conductivity
  • KS C IEC 61788-11:2005 Superconductivity-Part 11:Residual resistance ratio measurement-Residual resistance ratio of Nb3Sn composite superconductors
  • KS I ISO 11265:2021 Soil quality — Determination of the specific electrical conductivity
  • KS I ISO 11265-2005(2015) Soil quality-Determination of the specific electrical conductivity
  • KS C 2607-1974(2000) TESTING METHODS OF SEMICONDUCTOR
  • KS C 2607-1980 TESTING METHODS OF SEMICONDUCTOR
  • KS C IEC 61788-16:2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies
  • KS M ISO 2882:2008 Rubber, vulcanized-Antistatic and conductive products for hospital use-Electrical resistance limits
  • KS M 6768-2004(2019) Rubber vulcanized - Antistatic and condctive products for hospital use - Electrical resistance limits
  • KS M ISO 2882:2013 Rubber, vulcanized-Antistatic and conductive products for hospital use-Electrical resistance limits
  • KS I 8001-2009(2019) General rules for electrical conductivity measuring method
  • KS M 6773-2014 Testing method for volume resistivity of electrically conductive rubber and plastic materials
  • KS C 6111-1997(2002) TEST METHODS OF D.C. CRITICAL CURRENT OF Cu/Nb-Ti COMPOSITE SUPERCONDUCTORS
  • KS I 3201-2007 Testing methods for electric conductivity in highly purified water
  • KS C 2603-1980 Testing Method for Conductor-Resistance and Resistivity of Metallic Resistance materials
  • KS C IEC 61173:2002 Overvoltage protection for photovoltaic(PV) power generating systems-Guide
  • KS L 3306-2007(2012) Testing method for thermal conductivity of firebricks by hot wire
  • KS C IEC 61173:2015 Overvoltage protection for photovoltaic(PV) power generating systems-Guide
  • KS L 3306-1980 Testing method for thermal conductivity of firebricks by hot wire
  • KS C IEC 61136-1-2002(2012) Semiconductor power convertors-Adjustable speed eletcric drive systems-General requirements-Part 1 : Rating specifications, particularly for d.c. motor drives
  • KS C 2603-1980(2020) Testing Method for Conductor-Resistance and Resistivity of Metallic Resistance materials
  • KS L 1619-2013(2018) Testing methods for resistivity of conductive fine ceramic thin films with four point probe array
  • KS M 6773-2014(2019) Testing method for volume resistivity of electrically conductive rubber and plastic materials

UY-UNIT, Conductivity en value

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Conductivity en value

Group Standards of the People's Republic of China, Conductivity en value

Professional Standard - Aerospace, Conductivity en value

CO-ICONTEC, Conductivity en value

PL-PKN, Conductivity en value

  • PN C04540-01-1990 Water and waste water Tests for pH, acidity and alkalinity Electrometric pH determination of water and waste water with specific conductivity 10 nS/cm and higher
  • PN T01504-01-1987 Transistors Measuring methods Static value of the forward current transfer ratio hus and base-emitter voltage Ube

Professional Standard - Environmental Protection, Conductivity en value

  • HJ 802-2016 Soil quality—Determination of conductivity- Electrode method
  • HJ/T 97-2003 The technical requirement for water quality automatic analyzer of electroconductivity

RO-ASRO, Conductivity en value

  • STAS 8917-1971 CONVEYOR BELTS Determination of electrical conductivity
  • STAS 12553/21-1988 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT FIXED LOW-POWER NON- W IRE WO UND RESISTORS Blank detail specification for quality assessment level E
  • STAS 12553/20-1987 FIXED RESISTORS FOR USE IN ELECTRONIG EQUIPMENTS FIXED LOW POWER NON WIREWOUND RESISTORS
  • STAS 8890-1980 Electrical insulating paper and board DETERMINATION OF CONDUCTIVITY OF AQUEOUS EXTRACT

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Conductivity en value

International Federation of Trucks and Engines, Conductivity en value

Professional Standard - Aviation, Conductivity en value

  • HB 7063-1994 Aluminum alloy conductivity and hardness
  • HB 5356-1986 Eddy current test method for electrical conductivity of aluminum alloy

CN-QIYE, Conductivity en value

BE-NBN, Conductivity en value

Professional Standard - Medicine, Conductivity en value

European Committee for Electrotechnical Standardization(CENELEC), Conductivity en value

  • EN 61788-11:2011 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
  • EN 61788-4:2011 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductor
  • EN 61788-4:2016 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
  • EN 61788-7:2006 Superconductivity Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies

CENELEC - European Committee for Electrotechnical Standardization, Conductivity en value

  • EN 61788-11:2003 Superconductivity Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
  • EN 61788-4:2001 Superconductivity Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • EN 61788-4:2007 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • EN 61788-7:2002 Superconductivity Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies

European Committee for Standardization (CEN), Conductivity en value

  • EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
  • EN ISO 3915:1999 Plastics - Measurement of Resistivity of Conductive Plastics
  • EN 20284:1993 Conveyor Belts - Electrical Conductivity - Specification and Method of Test (ISO 284: 1982) Superseded by EN ISO 284:2003
  • EN 27888:1993 Water quality; determination of electrical conductivity (ISO 7888:1985)
  • EN ISO 8031:2020 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020)
  • EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
  • EN 2853:2005 Aerospace series - Current ratings for electrical cables with conductor EN 2083
  • EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019)
  • EN ISO 15091:2012 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)
  • prEN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021)
  • EN 13038:1999 Soil Improvers and Growing Media - Determination of Electrical Conductivity

Danish Standards Foundation, Conductivity en value

  • DS/EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
  • DS/EN 27888:2003 Water quality - Determination of electrical conductivity (ISO 7888:1985)
  • DS/EN ISO 15091:2013 Paints and varnishes - Determination of electrical conductivity and resistance
  • DS/EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
  • DS/ISO 1853:1980 Conducting and antistatic rubber. Measurement of resistivity
  • DS/EN ISO 284:2013 Conveyor belts - Electrical conductivity - Specification and test method

National Metrological Technical Specifications of the People's Republic of China, Conductivity en value

  • JJF 1692-2018 Calibration Specification for Eddy Current Conductivity Meters
  • JJF 1357-1990 Electrolyte Conductivity Benchmark Operation Technical Specifications
  • JJF 1516-2015 Calibration Specification for Electrical Conductivity Standards of Nonferrous Metals

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Conductivity en value

IPC - Association Connecting Electronics Industries, Conductivity en value

BR-ABNT, Conductivity en value

Anhui Provincial Standard of the People's Republic of China, Conductivity en value

Canadian Standards Association (CSA), Conductivity en value

  • CSA C802.3-2015 Valeurs minimales de rendement pour les transformateurs de puissance (Deuxième édition)

Underwriters Laboratories (UL), Conductivity en value

  • UL 1277-1996 Electrical power and control tray cables with optional optical-fiber members

TR-TSE, Conductivity en value

  • TS 2734-1977 Conducting Ind Intistatic Rubbers - Measurement Of Resistivity
  • TS 209-1965 RESISTIVITY OF COMMERCIAL HARD-DRAVVN ALUMINIUM ELECTRICAL CONDUCTOR WIRE

Professional Standard - Electricity, Conductivity en value

  • DL/T 1764-2017 Technical guidelines for value evaluation of orderly electricity use by power users
  • DL/T 1207-2013 Test method for on-line conductivity measurement of purity water for power plant
  • DL/T 1201-2013 Test method for on-line pH measurement of water of low conductivity for power plant
  • DL/T 1356-2014 Online measurement method of cation conductivity deducted the impact of phosphate in boiler water
  • DL/T 1602-2016 On-line measurement method for degassed hydrogen conductivity of pure water in power plants

VE-FONDONORMA, Conductivity en value

American Petroleum Institute (API), Conductivity en value

NL-NEN, Conductivity en value

  • NEN-ISO 7888:1994 Water quality.Determination of electrical conductivity(ISO 7888:1985)
  • NEN 6591-1990 Rainwater- Determination of electrical conductivity by continuous flow analysis

AENOR, Conductivity en value

  • UNE 77308:2001 Soil quality. Determination of the specific electrical conductivity.
  • UNE-EN 27888:1994 WATER QUALITY. DETERMINATION OF ELECTRICAL CONDUCTIVITY. (ISO 7888:1985).
  • UNE-EN ISO 3915:2000 PLASTICS - MEASUREMENT OF RESISTIVITY OF CONDUCTIVE PLASTICS (ISO 3915:1981)
  • UNE 22315:1985 VENTILATION DUCTS. ELECTRIC CONDUCTIVITY. TESTING METHOD. SPECIFICATIONS.
  • UNE 34185:1984 SUGARS. DETERMINATION OF CONDUCTIVITY ASH. METHOD BY POINTS ATTRIBUTION.
  • UNE-EN ISO 15091:2013 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)
  • UNE-ISO 1853:2012 Conducting and dissipative rubbers, vulcanised or thermoplastic. Measurement of resistivity
  • UNE 18155:1981 ANTISTATIC ENDLESS V-BELTS - ELECTRICAL CONDUCTIVITY - CHARACTERISTICS AND METHOD OF TEST.

Lithuanian Standards Office , Conductivity en value

  • LST EN 27888-1999 Water quality - Determination of electrical conductivity (ISO 7888:1985)
  • LST EN 61788-11-2011 Superconductivity -- Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors (IEC 61788-11:2011)
  • LST EN 61788-4-2011 Superconductivity -- Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2011)
  • LST EN ISO 3915:2001 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981)
  • LST EN ISO 15091:2013 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Conductivity en value

  • IEEE C37.106-1987 Guide for Abnormal Frequency Protection for Power Generating Plants
  • IEEE 3-1943 GUIDING PRINCIPLES FOR THE SELECTION OF REFERENCE VALUES FOR ELECTRICAL STANDARDS
  • IEEE 3-1962 GUIDING PRINCIPLES FOR THE SELECTION OF REFERENCE VALUES FOR ELECTRICAL STANDARDS
  • IEEE 3-1942 GUIDING PRINCIPLES FOR THE SELECTION OF REFERENCE VALUES FOR ELECTRICAL STANDARDS
  • IEEE 127-1963 STANDARD FOR AEROSPACE EQUIPMENT VOLTAGE AND FREQUENCY RATINGS

Military Standard of the People's Republic of China-General Armament Department, Conductivity en value

  • GJB 2894-1997 Aluminum alloy conductivity and hardness requirements
  • GJB/J 3049-1997 Calibration procedures for light oil conductivity meters
  • GJB 10010-2021 Method for measuring conductivity of insulating materials used in aerospace
  • GJB 8681-2015 Calibration procedures for conductivity and volume resistance testers of solid explosives

IN-BIS, Conductivity en value

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Conductivity en value

  • GB/T 33328-2016 Paints and varnishes—Determination of electrical conductivity and resistance
  • GB/T 35392-2017 Non-destructive testing—Test method for determining electrical conductivity using the electromagnetic (eddy-current) method

ECIA - Electronic Components Industry Association, Conductivity en value

  • 364-54-1988 TP-54 Magnetic Permeability for Electrical Connectors and Electrical Contacts

Professional Standard - Ocean, Conductivity en value

  • HY/T 267-2018 Testing method of seawater conductivity measuring instrument

Society of Automotive Engineers (SAE), Conductivity en value

Gansu Provincial Standard of the People's Republic of China, Conductivity en value

  • DB62/T 2632-2015 Conductivity Method for Determination of Vitality of Alfalfa Seeds

YU-JUS, Conductivity en value

  • JUS G.E0.045-1991 Rubber and plastic.Antistatic and conductive products for industrial use. Electrical resistance limits
  • JUS G.E0.046-1991 Rubber and plastic. Antistatic and conductive products for hospital use. Electrical resistance limits

CH-SNV, Conductivity en value

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Conductivity en value

  • JEDEC JESD24-11-1996 Power MOSFET Equivalent Series Gate Resistance Test Method Addendum to JEDEC JESD 24

Institute of Electrical and Electronics Engineers (IEEE), Conductivity en value

  • AIEE No.3-1943 AIEE Standards for Guiding Principles for the Selection of Reference Values for Electrical Standards
  • IEEE No 127 IEEE Standard for Aerospace Equipment Voltage and Frequency Ratings

Professional Standard - Coal, Conductivity en value

  • MT/T 690-1997 Determination of resistance on ground and mesa conducting statial electricity in detonator production line

European Association of Aerospace Industries, Conductivity en value

  • AECMA PREN 2853-1993 Aerospace Series Current Ratings for Electrical Cables with Conductor EN 2083 Revision 2
  • AECMA PREN 2853-1998 Aerospace Series Current Ratings for Electrical Cables with Conductor EN 2083 Edition P 1

ET-QSAE, Conductivity en value

The Aluminum Association, Conductivity en value

  • AA RECA-1991 Report on Electrical Conductivity in Heat Treated Aluminum Alloy Plate

Inner Mongolia Provincial Standard of the People's Republic of China, Conductivity en value

  • DB15/T 1537-2018 High conductivity rare earth aluminum bus bar technical specification

Professional Standard - Energy, Conductivity en value

AT-OVE/ON, Conductivity en value

  • OVE EN IEC 61788-7:2021 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies ((IEC 61788-7:2020) EN IEC 61788-7:2020) (german version)

Defense Logistics Agency, Conductivity en value

(U.S.) Telecommunications Industries Association , Conductivity en value

JP-JRA, Conductivity en value

  • JRA GL-07-2008 Guideline of limits for harmonic current emissions from refrigeration and air conditioning equipment

NZ-SNZ, Conductivity en value

  • AS/NZS 1660.5.4:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.4: Fire Tests - Determination of Degree of Acidity of Gases Evolved During the Combustion of Materials Taken from Electric Cables by Measuring pH and Conductivity

Indonesia Standards, Conductivity en value

  • SNI 06-6989.1-2004 Water and waste water - Part 1: Test methods of electrical conductivity

Professional Standard - Forestry, Conductivity en value

  • LY/T 1616-2004 Determination of electric conductivity of aqueous extract from activated carbon

Professional Standard - Non-ferrous Metal, Conductivity en value

  • YS/T 478-2005 The method for electrical conductivity measurement of copper and copper alloys by use of eddy current

GM North America, Conductivity en value

Aeronautical Radio Inc., Conductivity en value

  • ARINC 673-2009 GUIDANCE FOR THE USE OF UHF RADIO FREQUENCY IDENTIFICATION (RFID)

GOSTR, Conductivity en value

  • GOST 33461-2015 Aviation and distillate fuels. Test methods for electrical conductivity

Professional Standard - Geology, Conductivity en value

  • DZ/T 0064.6-1993 Determination of electrical conductivity by groundwater quality inspection method

Professional Standard - Military and Civilian Products, Conductivity en value

  • WJ 2643-2004 Specification for conductivity standard material of solid propellants and explosives

Professional Standard - Agriculture, Conductivity en value

工业和信息化部, Conductivity en value

  • JB/T 13940-2020 Non-destructive testing instrument eddy current conductivity detector

未注明发布机构, Conductivity en value

  • BS 1432:1987(2000) Specification for Copper for electrical purposes : high conductivity copper rectangular conductors with drawn or rolled edges

United States Navy, Conductivity en value

Shanghai Provincial Standard of the People's Republic of China, Conductivity en value

  • DB31/T 595-2012 Permissible value of power consumption and energy efficiency level of cold storage unit products
  • DB31/ 595-2012 Permissible value of power consumption and energy efficiency level of cold storage unit products
  • DB31/595-2012 Permissible value of power consumption and energy efficiency level of cold storage unit products
  • DB31/ 514-1992 Vulcanized rubber -- Antistatic and conductive rubber products for anesthesia machines -- Limiting values of electrical resistance

ES-AENOR, Conductivity en value





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved