ZH
RU
ES
Potential Value Conductivity
Potential Value Conductivity, Total:496 items.
In the international standard classification, Potential Value Conductivity involves: Hydraulic energy engineering, HEALTH CARE TECHNOLOGY, Water quality, Analytical chemistry, Pulps, Paper and board, Integrated circuits. Microelectronics, Semiconductor devices, Soil quality. Pedology, Linear and angular measurements, Insulating fluids, Power transmission and distribution networks, Electricity. Magnetism. Electrical and magnetic measurements, Conducting materials, Resistors, Vocabularies, Electrical wires and cables, Internal combustion engines for road vehicles, Construction materials, Products of non-ferrous metals, Fuels, Road vehicles in general, Sugar. Sugar products. Starch, Electromagnetic compatibility (EMC), Milk and milk products, Crude petroleum, Non-ferrous metals, Plastics, Electrical and electronic testing, Radiocommunications, Rubber, Surface treatment and coating, Electrical accessories, Test conditions and procedures in general, Medical equipment, Protection against fire, Testing of metals, Geology. Meteorology. Hydrology, Organic chemicals, Installations in buildings, Safety of machinery, Paints and varnishes, Power stations in general, Products of the chemical industry, Tobacco, tobacco products and related equipment, Quantities and units, Petroleum products in general, Energy and heat transfer engineering in general, Thermodynamics and temperature measurements, Electronic components in general, Adhesives, Non-destructive testing, Raw materials for rubber and plastics, Fasteners, Kitchen equipment, Electrical engineering in general, Flexible drives and transmissions, Waxes, bituminous materials and other petroleum products, Lubricants, industrial oils and related products, Pipeline components and pipelines, Fuel cells, Reinforced plastics, Corrosion of metals, Fruits. Vegetables, Inorganic chemicals, Aerospace electric equipment and systems, Ferroalloys, Paint ingredients, Photography, Meat, meat products and other animal produce, Farming and forestry, Materials for aerospace construction, Electromechanical components for electronic and telecommunications equipment, Industrial automation systems, Metrology and measurement in general, Printed circuits and boards, Optoelectronics. Laser equipment, Edible oils and fats. Oilseeds, Burners. Boilers, Continuous handling equipment.
PL-PKN, Potential Value Conductivity
- PN C04540-01-1990 Water and waste water Tests for pH, acidity and alkalinity Electrometric pH determination of water and waste water with specific conductivity 10 nS/cm and higher
- PN T06513-02-1990 Measurement of redox potential value Industrial analyzers
- PN C04520-04-1986 Chemical products Determination of bromine number by potentiometric titration
- PN T01023-1975 Radiolocation and radionavigation Terms and definitions
- PN T01504-01-1987 Transistors Measuring methods Static value of the forward current transfer ratio hus and base-emitter voltage Ube
- PN C45051-06-1986 Higher alkohols fats Methods of test Determination of carbonyl value Potentiometric method
Professional Standard - Water Conservancy, Potential Value Conductivity
- SL 78-1994 Determination of conductivity (Conductivity instrument method)
Shanghai Provincial Standard of the People's Republic of China, Potential Value Conductivity
- DB31/T 595-2012 Permissible value of power consumption and energy efficiency level of cold storage unit products
- DB31/ 595-2012 Permissible value of power consumption and energy efficiency level of cold storage unit products
- DB31/595-2012 Permissible value of power consumption and energy efficiency level of cold storage unit products
- DB31/ 514-1992 Vulcanized rubber -- Antistatic and conductive rubber products for anesthesia machines -- Limiting values of electrical resistance
American Society for Testing and Materials (ASTM), Potential Value Conductivity
- ASTM D5464-93(2001) Standard Test Methods for pH Measurement of Water of Low Conductivity
- ASTM D5464-16 Standard Test Method for pH Measurement of Water of Low Conductivity
- ASTM D5128-14 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
- ASTM D1125-23 Standard Test Methods for Electrical Conductivity and Resistivity of Water
- ASTM D4496-21 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
- ASTM UOP565-92 Acid Number and Naphthenic Acids by Potentiometric Titration
- ASTM UOP565-04 Acid Number and Naphthenic Acids by Potentiometric Titration
- ASTM D4399-05 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
- ASTM G5-94(2011)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
- ASTM F744M-10 Standard Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits [Metric]
- ASTM D2739-97 Standard Test Method for Volume Resistivity of Conductive Adhesives
- ASTM B193-02 Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM B193-00 Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM B193-01 Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM E1004-99 Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
- ASTM B193-87(1992) Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM B193-19 Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM B193-87 Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM B193-20 Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM D4399-05(2023) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
- ASTM B193-02(2008) Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM B193-02(2014) Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM B193-16 Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM C1876-19 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
- ASTM D1125-95(2005) Standard Test Methods for Electrical Conductivity and Resistivity of Water
- ASTM D1125-14 Standard Test Methods for Electrical Conductivity and Resistivity of Water
- ASTM D1125-95(2009) Standard Test Methods for Electrical Conductivity and Resistivity of Water
- ASTM D5391-23 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
- ASTM F1896-10 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
- ASTM D2739-97(2017) Standard Test Method for Volume Resistivity of Conductive Adhesives
- ASTM D4739-17 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
CL-INN, Potential Value Conductivity
VN-TCVN, Potential Value Conductivity
American National Standards Institute （ANSI), Potential Value Conductivity
Professional Standard - Electron, Potential Value Conductivity
- SJ 50597/29-1994 Semiconductor integrated circuits.Detail specification for type JC4585 of CMOS 4-Bit magnitude comparator
- SJ 50597.1-1994 Detail specification for type JT54LS85 LS-TTL 4bit magnitude comparator of semiconductor integrated circuit
- SJ/T 2911-2022 Detailed specification for potentiometers for use in electronic equipment. Evaluation level E for type WH159 low-power potentiometers.
- SJ/T 10354-2022 Detailed Specification for Potentiometers for Electronic Equipment Type WHE121 Low Power Potentiometer Assessment Level E
- SJ/T 10041-1991 Detail specification for electronic component.Semiconductor integrated circuit-CC4014 CMOS 8-bit shift register
- SJ/T 10071-1991 Detail Specification for electronic component.Semiconductor integrated circuit.Type CH2022 4-bit shift register
RU-GOST R, Potential Value Conductivity
- GOST 18986.13-1974 Semiconductor tunnel diodes. Methods for measuring peak point current, valley point current, peak point voltage, valley point voltage, projected peak point voltage
- GOST 26423-1985 Soils. Methods for determination of specific electric conductivity, pH and solid residue of water extract
- GOST R 53120-2008 Honey. Method for determination of electroconductivity
- GOST 33613-2015 Butter. Potentiometric method for determination of pH of the serum
- GOST R IEC 60754-2-1999 Tests of materials from cables during combustion. Determination of degree of evolved gases by measuring pH and conductivity
- GOST 31770-2012 Honey. Method for determination of electroconductivity
- GOST 17823.3-1980 Wood chemical products. Method for determination of acid number by potentiometric titration
- GOST R 51456-1999 Butter. Potentiometric method for determination of pH of the serum
- GOST IEC 60754-2-2011 Tests of materials from cables during combustion. Determination of degree of evolved gases acidity by measuring pH and conductivity
- GOST 30050-1993 Petroleum products. Total base number. Perchloric acid potentiometric titration method
- GOST 32327-2013 Petroleum products. Determination for acid number by potentiometric titration
- GOST ISO 6619-2013 Petroleum and lubricants. Number neutralization. Method of potentiometric titration
- GOST IEC 60754-2-2015 Test on gases evolved during combustion of materials from cables. Part 2. Determination of acidity (by pH measurement) and conductivity
- GOST 33313-2015 Juice products. Determination of formol number by potentiometric method
- GOST 25183.7-1982 Photographic gelatine. Method of determination of specific electroconductivity
- GOST 18986.16-1972 Rectifier diodes. Methods of measuring average forward voltage and average reverse current
SE-SIS, Potential Value Conductivity
Professional Standard - Machinery, Potential Value Conductivity
工业和信息化部/国家能源局, Potential Value Conductivity
Professional Standard - Chemical Industry, Potential Value Conductivity
- HG/T 3335-1977 Electrophoretic Paint Conductivity Determination Method
- HG 2-1047-1977 Electrophoretic Paint Conductivity Determination Method
KR-KS, Potential Value Conductivity
- KS C 3001-1983(2023)
- KS M ISO 2882-2008 Rubber, vulcanized－Antistatic and conductive products for hospital use－Electrical resistance limits
- KS I 3201-2023 Testing methods for electric conductivity in highly purified water
- KS H ISO 7238-2021 Butter — Determination of pH of serum — Potentiometric method
- KS C IEC 61788-16-2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies
- KS I ISO 11265-2021 Soil quality — Determination of the specific electrical conductivity
- KS C IEC 60393-2-2020 Potentiometers for use in electronic equipment Part 2: Sectional specification. Lead-screw actuated and rotary preset potentiometer.
Professional Standard - Electricity, Potential Value Conductivity
- DL/T 2553-2022 Technical Guidelines for Measurement of Soil Resistivity, Ground Impedance and Surface Potential in Power Grounding Systems
- DL/T 1764-2017 Technical guidelines for value evaluation of orderly electricity use by power users
- DL/T 1207-2013 Test method for on-line conductivity measurement of purity water for power plant
- DL/T 1201-2013 Test method for on-line pH measurement of water of low conductivity for power plant
- DL/T 1602-2016 On-line measurement method for degassed hydrogen conductivity of pure water in power plants
British Standards Institution (BSI), Potential Value Conductivity
- BS IEC 62951-2:2019 Semiconductor devices. Flexible and stretchable semiconductor devices - Evaluation method for electron mobility, sub-threshold swing, and threshold voltage of flexible devices
- BS EN 61788-4:2007 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
- BS EN 61000-3-2:2006 Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
- BS EN 61788-11:2003 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
- BS EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
- BS 3839:1978 Specification for oxygen-free high-conductivity copper for electronic tubes and semiconductor devices
- BS EN 27888:1993 Water quality. Method for the determination of electrical conductivity
- BS ISO 7238:2004 Butter - Determination of pH of the serum - Potentiometric method
- BS EN 60746-3:2002 Expression of performance of electrochemical analyzers - Electrolytic conductivity
- BS EN 60393-5:2016 Potentiometers for use in electronic equipment. Sectional specification. Single-turn rotary low-power wirewound and non-wirewound potentiometers
- BS EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
- 21/30427395 DC BS EN ISO 3915. Plastics. Measurement of resistivity of conductive plastics
- BS EN ISO 3915:2022 Tracked Changes. Plastics. Measurement of resistivity of conductive plastics
- BS EN 61788-7:2002 Superconductivity - Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
- BS EN 61788-7:2007 Superconductivity - Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
- BS QC 410200:1992 Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification for single-turn rotary power potentiometers
- BS EN ISO 27107:2008 Animal and vegetable fats and oils - Determination of peroxide value - Potentiometric end-point determination
- BS 2000-136.2:1999 Methods of test for petroleum and its products - Determination of saponification number - Potentiometric titration method - Section 136.2: Potentiometric titration method
- BS 2000-136-2:1999 Methods of test for petroleum and its products. Determination of saponification number. Potentiometric titration method. Section 136.2: Potentiometric titration method
- BS EN IEC 61788-7:2020 Superconductivity - Electronic characteristic measurements. Surface resistance of high-temperature superconductors at microwave frequencies
- BS EN 61788-16:2013 Superconductivity. Electronic characteristic measurements. Power-dependent surface resistance of superconductors at microwave frequencies
Japanese Industrial Standards Committee (JISC), Potential Value Conductivity
- JIS H 7312:2007 Superconductivity -- Residual resistance ratio measurement -- Residual resistance ratio of Nb3Sn composite superconductors
- JIS K 0112:1979 General rules for method of conductometric titration
- JIS K 0400-13-10:1999 Water quality -- Determination of electrical conductivity
- JIS H 0505:1975 Measuring methods for electrical resistivity and conductivity of non-ferrous materials
- JIS Z 8202-5:2000 Quantities and units -- Part 5: Electricity and magnetism
- JIS K 0130:2008 General rules for electrical conductivity measuring method
- JIS K 0552:1994 Testing methods for electric conductivity in highly purified water
- JIS C 2525:1999 Testing method for conductor-resistance and resistivity of metallic resistance materials
- JIS C 3666-2:2002 Test on gases evolved during combustion of electric cables -- Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
- JIS C 5260-2:2000 Potentiometers for use in electronic equipment -- Part 2: Sectional specification: Lead-screw actuated and rotary preset potentiometers
- JIS C 5260-5:2000 Potentiometers for use in electronic equipment -- Part 5: Sectional specification: Single-turn rotary low-power wirewound and non-wirewound potentiometers
- JIS Z 8202-10:2000 Quantities and units -- Part 10: Nuclear reactions and ionizing radiations
Korean Agency for Technology and Standards (KATS), Potential Value Conductivity
- KS C IEC 60393-5-2-2005(2010) Potentiometers for use in electronic equipment－Potentiometers for use in electronic equipment－low-power potentiometer－Assessment level F
- KS I 8001-2009 General rules for electrical conductivity measuring method
- KS I ISO 7888:2007 Water quality－Determination of electrical conductivity
- KS I ISO 7888-2007(2017) Water quality－Determination of electrical conductivity
- KS D 0240-2010 Measuring methods for electrical resistivity and conductivity of non-ferrous metals
- KS M ISO 3915:2002 Plastics-Measurement of resistivity of conductive plastics
- KS M 3034-1980(2011) Test methods for electrical resistivity of conductive plastics
- KS M ISO 3915-2002(2017) Plastics－Measurement of resistivity of conductive plastics
- KS M ISO 3915-2002(2022) Plastics－Measurement of resistivity of conductive plastics
- KS M 3034-1985 Test methods for electrical resistivity of conductive plastics
- KS C IEC 61000-1-4:2007 Electromagnetic compatibility(EMC)－Part 1－4：General－Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
- KS M 0042-1999
- KS C 5393-4-2001(2016) Potentiometers for use in electronic equipment－Part 4：Sectional specification：Single－turn rotary power potentiometers
- KS C 5393-4-2001(2021) Potentiometers for use in electronic equipment－Part 4：Sectional specification：Single－turn rotary power potentiometers
- KS M ISO 2882:2008 Rubber, vulcanized－Antistatic and conductive products for hospital use－Electrical resistance limits
- KS M 6768-2004(2019) Rubber vulcanized - Antistatic and condctive products for hospital use - Electrical resistance limits
- KS M ISO 2882:2013 Rubber, vulcanized－Antistatic and conductive products for hospital use－Electrical resistance limits
- KS I ISO 11265:2005 Soil quality-Determination of the specific electrical conductivity
- KS H ISO 1279:2006 Essential oils-Determination of carbonyl value-Potentiometric methods using hydroxylammonium chloride
- KS H ISO 12863:2015 Standard test method for assessing the ignition propensity of cigarettes
- KS H ISO 7238:2006 Butter－Determination of pH of serum－Potentiometric method
- KS H ISO 7238:2021 Butter — Determination of pH of serum — Potentiometric method
- KS H ISO 1279:2014 Essential oils — Determination of carbonyl value — Potentiometric methods using hydroxylammonium chloride
- KS C IEC 61788-11:2005 Superconductivity－Part 11：Residual resistance ratio measurement－Residual resistance ratio of Nb3Sn composite superconductors
- KS C IEC 61788-16:2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies
- KS M 6773-2014 Testing method for volume resistivity of electrically conductive rubber and plastic materials
- KS H ISO 7238-2006(2016) Butter -- Determination of pH of serum -- Potentiometric method
- KS I ISO 11265:2021 Soil quality — Determination of the specific electrical conductivity
- KS I ISO 11265-2005(2015) Soil quality－Determination of the specific electrical conductivity
- KS C 2607-1974(2000) TESTING METHODS OF SEMICONDUCTOR
- KS C 2607-1980 TESTING METHODS OF SEMICONDUCTOR
- KS C 2603-1980 Testing Method for Conductor-Resistance and Resistivity of Metallic Resistance materials
- KS C 2603-1980(2020) Testing Method for Conductor-Resistance and Resistivity of Metallic Resistance materials
- KS M ISO 6619:2003 Petroleum products and lubricants-Neutralization number-Potentiometric titration method
- KS M ISO 4316-2004(2019) Surface active agents－Determination of pH of aqueous solutions－Potentiometric method
- KS M ISO 6619-2016(2021) Petroleum products and lubricants－Neutralization number－Potentiometric titration method
- KS M ISO 6619:2016 Petroleum products and lubricants－Neutralization number－Potentiometric titration method
- KS C IEC 61000-3-2:2010 Electromagnetic compatibility(EMC)－Part 3-2：Limits－Limits for harmonic current emissions(equipment input current ≤ 16 A per phase)
- KS I 8001-2009(2019) General rules for electrical conductivity measuring method
- KS C IEC 60746-3-2014(2019) Expression of performance of electrochemical analyzers — Part 3: Electrolytic conductivity
- KS C IEC 60393-2:2020 Potentiometers for use in electronic equipment Part 2: Sectional specification. Lead-screw actuated and rotary preset potentiometer.
- KS C IEC 60393-5:2005 Potentiometers for use in electronic equipment－Part 5：Sectional specification：Single-turn rotary low-power wirewound and non-wirewound potentiometers
- KS C IEC 60393-5-2005(2020) Potentiometers for use in electronic equipment－Part 5：Sectional specification：Single-turn rotary low-power wirewound and non-wirewound potentiometers
- KS M ISO 3771-2012(2017) Petroleum products－Determination of base number－Perchloric acid potentiometric titration method
- KS M ISO 3771-2012(2022) Petroleum products－Determination of base number－Perchloric acid potentiometric titration method
RO-ASRO, Potential Value Conductivity
- STAS SR 8934-2-1996 Sodium chloride. Measurement of pH. Potentiometric method
- STAS 8917-1971 CONVEYOR BELTS Determination of electrical conductivity
- STAS 12553/20-1987 FIXED RESISTORS FOR USE IN ELECTRONIG EQUIPMENTS FIXED LOW POWER NON WIREWOUND RESISTORS
- STAS 12553/21-1988 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT FIXED LOW-POWER NON- W IRE WO UND RESISTORS Blank detail specification for quality assessment level E
Professional Standard - Environmental Protection, Potential Value Conductivity
- HJ 962-2018 Potentiometric method for the determination of soil pH
- HJ 802-2016 Soil quality—Determination of conductivity- Electrode method
Taiwan Provincial Standard of the People's Republic of China, Potential Value Conductivity
- CNS 686-1980 Testing Standard for Conductivity of Insulated Conductors
- CNS 10913-1984 Resistance and conductivity of copper materials for electrical purposes
- CNS 15111-2007 Methods of test for electrical conductivity and resistivity of water
- CNS 13727-1996 Method of Test for Volume Resistivity of Conductive Adhesives
- CNS 14639-2002 Methods of test for electric conductivity in highly purified water
- CNS 6679-2006 Essential oils - Determination of carbonyl value - Potentiometric methods using hydroxylammonium chloride
International Telecommunication Union (ITU), Potential Value Conductivity
UY-UNIT, Potential Value Conductivity
CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Potential Value Conductivity
Group Standards of the People's Republic of China, Potential Value Conductivity
Professional Standard - Aerospace, Potential Value Conductivity
- QJ 1523-1988 Conductive Adhesive Resistivity Test Method
- QJ 2876-1997 Detail specification for WDD precision conductive plastic potentiometer
CZ-CSN, Potential Value Conductivity
- CSN 35 8106-1982 Resistors. Series of nominal power values
- CSN 65 6214-1986 Petroleum produets. Neutralization number - potentiometric titration method
- CSN 42 0475-1982 Metal testing. Determination of electric conductivity of metallurgical products
- CSN 58 8792-1994 Methods of test for fats and oils Determination of hydroxyvalue with potentiometric indication
- CSN IEC 228A:1992 Conductors of insulated cables Guide to the dimensional limits of circular conductors
- CSN 35 8746-1973 Semiconductor devices. Transistore. Measurement of absolute value of forward current transfer ratio and frequencies fT, fh21b, fh21e
- CSN 65 6069-1977 Petroleum products Total base number Potentiometric perchloric acid titration method
- CSN 50 0332-1972 Paper sizing measurement by lectroconduotivity method
- CSN 35 1602-1981 Power semiconductor devices. Ratings (limiting values) and characteristics
AT-ON, Potential Value Conductivity
- ONORM M 6241-1988 Water quality; determination of electrica! conductivity
- ONORM B 6015 Teil.5-1990 Determination of thermal conductivity by the guarded hot plate apparatus; determination of the nominal value of the thermal conductivity for insulation materials
- ONORM B 6015-6-1992 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the nominal value of the thermal conductivity for mineralic building materials
- ONORM EN 27888-1993 Water quality. Determination of electrical conductivity (ISO 7888:1985)
- OENORM EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021)
ZA-SANS, Potential Value Conductivity
- SANS 6240:2002 Electric conductivity of fine aggregate
- SANS 6240:2008 Electric conductivity of fine aggregate
- SANS 2883:2003 Rubber, vulcanized - Antistatic and conductive products for industrial use - Electrical resistance limits
- SANS 804,805,806+807:1970 STANDARD SPECIFICATION FOR ELECTROLYTIC TOUGH PITCH HIGH CONDUCTIVITY COPPER (Metric Units)
- SANS 11853:2003 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Potential Value Conductivity
- GB 18613-2020(英文版) Minimum allowable values of energy efficiency and values of efficiency grades for motors
- GB/T 11007-1989 Test method of electric conductivity analyzers
- GB/T 11007-2008 Test method of electrolytic conductivity analyzers
- GB/T 18609-2001 Standard test method for acid number of crude oil by potentiometric titration
- GB/T 18609-2011 Determination of acid number of crude oil by potentiometric titration
- GB/T 18932.15-2003 Method for the determination of electrical conductivity in honey
- GB/T 17025-1997 Potentiometers for use in electronic equipment. Part 4: Sectional specification. Single-turn rotary power potentiometers
- GB 6951-1986 Safe surface voltage of light fuel oil in tank filling operation
- GB/T 15662-1995 Method of testing volume resistivity of conducting and antistatic plastics
- GB/T 23246-2009 Conductivity-temperature-depth profiler
- GB/T 16906-1997 Standard test methods for electrical resistivity of antistatic coating in petroleum tanks
- GB/T 7304-2014 Standard test method for acid number of petroleum products by potentiometric titration
- GB 12021.2-2008 The maximum allowable values of the energy consumption and energy efficiency grade for househole refrigerators
- GB 12021.2-2003 The maximum allowable values of the energy consumption and energy efficiency grade for household refrigerators
- GB 5839-1986 Rating system for electron tubes and semiconductor devices
- GB/T 5839-1986 Rating systems for electronic tubes and semiconductor devise
- GB 12021.6-1989 The limited value and testing method of efficiency and warming energy consumption for automatic rice cookers
- GB/T 17949.1-2000 Guide for measuring earth resistivity,ground impedance,and earth surface potentials of a ground system Part 1:Normal measurements
- GB/T 10715-1989 Antistatic endless V-belts--Electrical conductivity--Characteristic and method of test
- GB 6950-2001 Safe rest conductivity of light fuel oil
- GB 6950-2001/XG1-2008 Light Oil Safety Static Conductivity
- GB 6950-2001(XG1-2008) Light Oil Safety Static Conductivity
- GB/T 12582-1990 Liquid hydrocarbons--Determination of electrical conductivity--Precision meter
- GB/T 15738-1995 Test method of resistivity for fibre reinforced conducting and antistatic plastics
- GB/T 15738-2008 Test method for resistivity of conducting and antistatic fiber reinforced plastics
- GB/T 24196-2009 Corrosion of metals and alloys.Electrochemical test methods.Cuidelines for conducting potentiostatic and potentiodynamic polarization measurements
- GB/T 15893.2-1995 Industrial circulating cooling water--Determination of pH--Electrometric method
- GB/T 6368-2008 Surface active agents.Determination of pH of aqueous solution.Potentiometric method
- GB/T 6368-1993 Surface active agents. Determination of pH of aqueous solutions. Potentiometric method
- GB/T 13580.3-1992 Determination of specific conductance in the wet precipitation
- GB/T 12966-1991 The method for electrical conductivity measurement of aluminium alloys by use of eddy current
- GB/T 12966-2008 The method for determining aluminum alloys conductivity using eddy current
- GB/T 23977-2009 Dyestuffs.Determination of content of salt.Conductance method
- GB 13580.3-1992 Method for Determination of Conductivity of Atmospheric Precipitation Water
- GB/T 3048.2-1994 Test methods for determining electrical properties of electric cables and wires.Measurement of resistivity of metallic conductive materials
- GB/T 20245.3-2013 Expression of performance of electrochemical analyzers.Part 3:Electrolytic conductivity
- GB 25958-2010 Minimum allowable values of energy efficiency and values of efficiency grade for small-power motors
- GB/T 14114-1993 General principles of measuring methods of V/F and F/V converters for semiconductor integrated circuits
- GB/T 16515-2023 Potentiometers for electronic equipment - Part 5: Specifications for single-turn low-power wirewound and non-wirewound potentiometers
- GB/T 12845-1991 Series and products of nonlinear circuits for semiconductor integrated circuits--Products of voltage/frequency and frequency/voltage converters
- GB/T 3048.3-1994 Test methods for determining electrical properties of electric cables and wires.Measurement of volumeresistivity of semi-conducting rubbers and plastics
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Potential Value Conductivity
Danish Standards Foundation, Potential Value Conductivity
- DS/ISO 31/5:1984 Quantities and units of electricity and magnetism
- DS/EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
- DS/ISO 1853:1980 Conducting and antistatic rubber. Measurement of resistivity
- DS/EN ISO 15091:2013 Paints and varnishes - Determination of electrical conductivity and resistance
- DS/ISO 31/10:1984 Quantities and units of nuclear reactions and ionizing radiations
- DS/ISO 31/6:1984 Quantities and units of light and related electromagnetic radiations
- DS/EN 27888:2003 Water quality - Determination of electrical conductivity (ISO 7888:1985)
- DS/EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
- DS/EN 60746-3/Corr.1:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
- DS/EN 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
- DS/ISO 3771:2011 Petroleum products - Determination of base number - Perchloric acid potentiometric titration method
American Welding Society (AWS), Potential Value Conductivity
- WRC 357:1990 Calculation of Electrical and Thermal Conductivities of Metallurgical Plasmas
Defense Logistics Agency, Potential Value Conductivity
- DLA SMD-5962-89946 REV A-2006 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, 4-BIT SYNCHRONOUS DECADE UP/DOWN COUNTER, MONOLITHIC SILICON
- DLA SMD-5962-90553 REV A-2006 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, 8-BIT SYNCHRONOUS BINARY DOWN COUNTER, MONOLITHIC SILICON
- DLA QPL-49465-16-2006 RESISTORS, FIXED, METAL ELEMENT (POWER TYPE), VERY LOW RESISTANCE VALUES, GENERAL SPECIFICATION FOR
国家市场监督管理总局、中国国家标准化管理委员会, Potential Value Conductivity
HU-MSZT, Potential Value Conductivity
International Organization for Standardization (ISO), Potential Value Conductivity
- ISO 7888:1985 Water quality; Determination of electrical conductivity
- ISO 7238:2004 | IDF 104:2004 Butter — Determination of pH of the serum — Potentiometric method
- ISO 3915:1981 Plastics; measurement of resistivity of conductive plastics
- ISO 3915:2022 Plastics — Measurement of resistivity of conductive plastics
- ISO 2878:2005 Rubber - Antistatic and conductive products - Determination of electrical resistance
- ISO 1853:1975 Conducting and antistatic rubbers; Measurement of resistivity
- ISO 11265:1994 Soil quality - Determination of the specific electrical conductivity
- ISO 15091:2019 Paints and varnishes — Determination of electrical conductivity and resistance
- ISO 7238:2004 Butter - Determination of pH of the serum - Potentiometric method
- ISO 7238:2004|IDF 104:2004 Butter — Determination of pH of the serum — Potentiometric method
- ISO 7238:1983 Butter; Determination of pH of the serum; Potentiometric method
- ISO 1279:1996 Essential oils - Determination of carbonyl value - Potentiometric methods using hydroxylammonium chloride
- ISO 2883:1980 Rubber, vulcanized; Antistatic and conductive products for industrial use; Electrical resistance limits
- ISO 2878:1987 Rubber, vulcanized; Antistatic and conductive products; Determination of electrical resistance
- ISO 2882:1979 Rubber, vulcanized; Antistatic and conductive products for hospital use; Electrical resistance limits
- ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
- ISO 17475:2005 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
- ISO 2365:1972 Ammonium nitrate for industrial use; Measurement of pH value; Potentiometric method
- ISO 3241:1975 Sodium sulphate for industrial use; Measurement of pH; Potentiometric method
- ISO 6619:1988 Petroleum products and lubricants; neutralization number; potentiometric titration method
- ISO 3771:2011 Petroleum products - Determination of base number - Perchloric acid potentiometric titration method
- ISO 284:1975 Title missing - Legacy paper document
- ISO 284:2003 Conveyor belts - Electrical conductivity - Specification and test method
Association Francaise de Normalisation, Potential Value Conductivity
- NF T90-031*NF EN 27888:1994 Water quality - Determination of electrical conductivity.
- NF EN 27888:1994 Qualité de l'eau - Détermination de la conductivité électrique
- NF T90-008:1953 WATER TESTING. ELECTROMETRIC MEASUREMENT OF PH WITH THE GLASS ELECTRODE.
- NF ISO 7238:2008 Beurre - Détermination du pH de la phase aqueuse - Méthode potentiométrique
- NF T51-080*NF EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics
- NF V04-316:1985 Butter. Determination of pH of the serum. Potentiometric method.
- NF T30-005*NF EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance
- NF EN ISO 15091:2020 Peintures et vernis - Détermination de la conductivité et de la résistance électriques
- NF V04-316*NF ISO 7238:2008 Butter - Determination of pH of the serum - Potentiometric method
- NF C31-888-4:2012 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors.
- NF ISO 11265:1995 Qualité du sol - Détermination de la conductivité électrique spécifique
- UTE C15-106U*UTE C15-106:2003 Cross-sections of protective conductors, earthing conductors and equipotential bonding conductors
- NF T47-135:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity.
- NF C31-888-16*NF EN 61788-16:2013 Superconductivity - Part 16 : electric characteristic measurements - Power dependent surface resistance of superconductors at microwave frequencies
- NF T73-206:1996 Surface active agents. Determination of the pH value of surfactant solutions or dispersions.
- NF T20-458:1976 Sodium sulphate for industrial use. Measurement of ph. Potentiometric method.
- NF X31-113*NF ISO 11265:1995 Soil quality. Determination of the specific electrical conductivity.
- NF EN 60754-2/A1:2020 Essai sur les gaz émis lors de la combustion des matériaux prélevés sur câbles - Partie 2 : détermination de la conductivité et de l'acidité (par mesure du pH)
- NF EN 60754-2:2014 Essai sur les gaz émis lors de la combustion des matériaux prélevés sur câbles - Partie 2 : détermination de la conductivité et de l'acidité (par mesure du pH)
- NF C31-888-11:2003 Superconductivity - Part 11 : residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors.
- NF C31-888-11:2011 Superconductivity - Part 11 : residual resistance ratio measurment - Residual resistance ratio of Nb3Sn composite superconductors.
- NF C91-003-2:1995 Electromagnetic compatibility (emc). Part 3 : limits. Section 2 : limits for harmonic current emissions (equipment input current inferior or equal 16 A per phase).
- NF C83-250-5*NF EN 60393-5:2016 Potentiometers for use in electronic equipment - Part 5 : sectional specification - Single-turn rotary low-power wirewound and non-wirewound potentiometers
- NF C01-067:1966 ELECTROTECHNICAL VOCABULARY. GROUP 67. RADIOLOCATION : RADIO-GONIOMETRY;RADAR;RADIO-NAVIGATION.
National Metrological Verification Regulations of the People's Republic of China, Potential Value Conductivity
- JJG 376-2007 Verification Regulation of Electrolytic Conductivity Meters
- JJG 2059-2014 Measuring Instruments for Electrolytic Conductivity
- JJG(民航) 0092-2006 Verification Regulation of Eddy Current Conductivity Meter
German Institute for Standardization, Potential Value Conductivity
- DIN EN 27888:1993 Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993
- DIN EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies (IEC 61788-16:2013); German version EN 61788-16:2013
- DIN 53779:1979 Determination of the electric conductivity and the specific resistance (resistivity) of aqueous extracts
- DIN EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999
- DIN EN ISO 3915:2022-05 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022); German version EN ISO 3915:2022
- DIN EN IEC 60393-4:2022-11 Potentiometers for use in electronic equipment - Part 4: Sectional specification: Single-turn rotary power potentiometers (IEC 40/2919/CD:2022); Text in German and English / Note: Date of issue 2022-10-14
- DIN 42801:1980-04 Connection device for potential equalization conductors
- DIN 42801-2:1984-01 Connection device for potential equalization conductors
- DIN 10753:2021-06 Analysis of honey - Determination of electrical conductivity
- DIN EN ISO 15091:2020-05 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019); German version EN ISO 15091:2020
- DIN 41450-2:1987 Potentiometers; single turn rotary potentiometers, low power; terms and definitions, characteristics, methods of test
- DIN EN 61788-11:2012 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb<(Index)3>Sn composite superconductors (IEC 61788-11:2011); German version EN 61788-11:2011
- DIN 42801:1980 Connection device for potential equalization conductors
- DIN 42801-2:1984 Connection device for potential equalization conductors
- DIN 19261:2016 pH measurement - Measuring methods with potentiometric cells - Terms and definitions
- DIN 19261:2005 pH measurement - Measuring methods with potentiometric cells - Terms and definitions
- DIN EN 61788-4:2012 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2011); German version EN 61788-4:2011
- DIN EN 61788-4:2008 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2007); German version EN 61788-4:2007
- DIN 10753:2021 Analysis of honey - Determination of electrical conductivity
- DIN EN 27888:1993-11 Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993
- DIN EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021); German and English version prEN ISO 3915:2021
- DIN EN 2853:2006-10 Aerospace series - Current ratings for electrical cables with conductor EN 2083; German and English version EN 2853:2005
- DIN EN 60746-3:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity (IEC 60746-3:2002 + Corrigendum 2002); German version EN 60746-3:2002
- DIN EN IEC 60393-4:2022 Potentiometers for use in electronic equipment - Part 4: Sectional specification: Single-turn rotary power potentiometers (IEC 40/2919/CD:2022); Text in German and English
- DIN EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019)
- DIN EN 60393-5:2016-12 Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound and nonwirewound potentiometers (IEC 60393-5:2015); German version EN 60393-5:2016
AENOR, Potential Value Conductivity
- UNE 34859:1985 BUTTER. DETERMINATION OF THE PH OF THE SERUM. POTENTIOMETRIC METHOD.
- UNE 84101:2006 Cosmetic raw materials. Toothpastes. pH determination. Potentiometric method.
- UNE 84103:2000 Cosmetic products. Mouthwashes. Determination of pH. Potentiometric method.
- UNE 30218:1976 AMMONIUM NITRATE FOR INDUSTRIAL USES. DETERMINATION OF PH. POTENCIOMETRIC METHOD.
- UNE-EN ISO 3915:2000 PLASTICS - MEASUREMENT OF RESISTIVITY OF CONDUCTIVE PLASTICS (ISO 3915:1981)
- UNE 77308:2001 Soil quality. Determination of the specific electrical conductivity.
- UNE-EN 27888:1994 WATER QUALITY. DETERMINATION OF ELECTRICAL CONDUCTIVITY. (ISO 7888:1985).
- UNE-EN 60746-3:2004 Expression of performance of electrochemical analyzers -- Part 3: Electrolytic conductivity
- UNE-EN ISO 15091:2013 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)
International Electrotechnical Commission (IEC), Potential Value Conductivity
- IEC 62951-2:2019 Semiconductor devices - Flexible and stretchable semiconductor devices - Part 2: Evaluation method for electron mobility, sub-threshold swing and threshold voltage of flexible devices
- IEC TR 61000-1-4:2005 Electromagnetic compatibility (EMC) - Part 1-4: General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
- IEC 60287:1982 Calculation of the continuous current rating of cables (100 % load factor)
- IEC 60393-4:1992 Potentiometers for use in electronic equipment; part 4: sectional specification: single-turn rotary power potentiometers
- IEC 60393-4:2023 Potentiometers for use in electronic equipment - Part 4: Sectional specification: Single-turn rotary power potentiometers
- IEC 61788-4:2001 Superconductivity - Part 4: Residual resistance ratio measurement; Residual resistance ratio of Nb-Ti composite superconductors
- IEC 61788-11:2011 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb<(Index)3>Sn composite superconductors
- IEC 61788-4:2007 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
- IEC 61788-4:2011 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
- IEC 61000-3-2:2001 Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions (equipment input current 16 A per phase)
- IEC 60746-3:2002/COR1:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity; Corrigendum 1
- IEC 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
- IEC 61788-4:2016 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- IEC 60050-815:2000 International Electrotechnical Vocabulary - Part 815: Supraconductivity
- IEC 60050-815:2015 International Electrotechnical Vocabulary - Part 815: Superconductivity
- IEC 61788-11:2003 Superconductivity - Part 11: Residual resistance ratio measurement; Residual resistance ratio of Nb<(Index)3>Sn composite superconductors
- IEC 60393-5:2015 Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound and non-wirewound potentiometers
- IEC 61000-3-2:1995 Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits for harmonic current emissions (equipment input current 16 A per phase)
TR-TSE, Potential Value Conductivity
- TS 2734-1977 Conducting Ind Intistatic Rubbers - Measurement Of Resistivity
- TS 209-1965 RESISTIVITY OF COMMERCIAL HARD-DRAVVN ALUMINIUM ELECTRICAL CONDUCTOR WIRE
- TS 1808-1975 AMMONIUM NITRATE FOR ?NDUSTRIAL USE — MEASUREMENT OF pH VALUE — POTENTIOMETR1C METHOD
WRC - Welding Research Council, Potential Value Conductivity
- BULLETIN 357-1990 CALCULATION OF ELECTRICAL AND THERMAL CONDUCTIVITIES OF METALLURGICAL PLASMAS
European Committee for Standardization (CEN), Potential Value Conductivity
- EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
- EN ISO 3915:1999 Plastics - Measurement of Resistivity of Conductive Plastics
- EN 27888:1993 Water quality; determination of electrical conductivity (ISO 7888:1985)
- EN ISO 8031:2020 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020)
- EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
- prEN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021)
- EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019)
ES-UNE, Potential Value Conductivity
- UNE-EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
- UNE-EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019)
- UNE-EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies (Endorsed by AENOR in May of 2013.)
- UNE-EN 2853:2005 Aerospace series - Current ratings for electrical cables with conductor EN 2083 (Endorsed by AENOR in December of 2005.)
- UNE-EN 60393-5:2016 Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound and nonwirewound potentiometers (Endorsed by AENOR in May of 2016.)
BE-NBN, Potential Value Conductivity
CO-ICONTEC, Potential Value Conductivity
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Potential Value Conductivity
International Federation of Trucks and Engines, Potential Value Conductivity
Professional Standard - Aviation, Potential Value Conductivity
- HB 7063-1994 Aluminum alloy conductivity and hardness
- HB 5356-1986 Eddy current test method for electrical conductivity of aluminum alloy
CN-QIYE, Potential Value Conductivity
ES-AENOR, Potential Value Conductivity
Underwriters Laboratories (UL), Potential Value Conductivity
- UL 1277-1996 Electrical power and control tray cables with optional optical-fiber members
Professional Standard - Medicine, Potential Value Conductivity
European Committee for Electrotechnical Standardization（CENELEC）, Potential Value Conductivity
- EN 61788-11:2011 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
- EN 61788-4:2011 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductor
- EN 61788-4:2016 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- EN 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
- EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
- EN 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
- EN 60393-5:2016 Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound and nonwirewound potentiometers
CENELEC - European Committee for Electrotechnical Standardization, Potential Value Conductivity
- EN 61788-11:2003 Superconductivity Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
- EN 61788-4:2001 Superconductivity Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
- EN 61788-4:2007 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
- EN 61000-3-2:1995 Electromagnetic Compatibility (EMC) Part 3: Limits Section 2: Limits for Harmonic Current Emissions (Equipment Input Current Less Tnan or Equal to 16 A per Phase) (Incorporates Amendment A12: 1996)
- EN 61000-3-2:2000 Electromagnetic Compatibility (EMC) Part 3-2: Limits - Limits for Harmonic Current Emissions (Equipment Input Current up to and Including 16 A Per Phase) (Incorporates Amendment A2: 2005)
National Metrological Technical Specifications of the People's Republic of China, Potential Value Conductivity
- JJF 1692-2018 Calibration Specification for Eddy Current Conductivity Meters
- JJF 1357-1990 Electrolyte Conductivity Benchmark Operation Technical Specifications
ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Potential Value Conductivity
IPC - Association Connecting Electronics Industries, Potential Value Conductivity
BR-ABNT, Potential Value Conductivity
Anhui Provincial Standard of the People's Republic of China, Potential Value Conductivity
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Potential Value Conductivity
- GB/T 33328-2016 Paints and varnishes—Determination of electrical conductivity and resistance
- GB/T 35392-2017 Non-destructive testing—Test method for determining electrical conductivity using the electromagnetic (eddy-current) method
- GB/T 35674-2017 General technical requirements for electromagnetic shielding all-round conductive foam
ECIA - Electronic Components Industry Association, Potential Value Conductivity
- 364-54-1988 TP-54 Magnetic Permeability for Electrical Connectors and Electrical Contacts
CH-SNV, Potential Value Conductivity
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Potential Value Conductivity
- PREN 4426-1998 Aerospace Series Textiles Test Method Determination of Conductivity and pH of Aqueous Extracts
YU-JUS, Potential Value Conductivity
- JUS G.E0.045-1991 Rubber and plastic.Antistatic and conductive products for industrial use. Electrical resistance limits
- JUS G.E0.046-1991 Rubber and plastic. Antistatic and conductive products for hospital use. Electrical resistance limits
Canadian Standards Association (CSA), Potential Value Conductivity
- CSA C802.3-2015 Valeurs minimales de rendement pour les transformateurs de puissance (Deuxième édition)
Lithuanian Standards Office , Potential Value Conductivity
- LST EN ISO 3915:2001 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981)
- LST EN 27888-1999 Water quality - Determination of electrical conductivity (ISO 7888:1985)
- LST EN 61788-11-2011 Superconductivity -- Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors (IEC 61788-11:2011)
- LST ISO 7238:2005 Butter. Determination of pH of the serum. Potentiometric method (idt ISO 7238:2004)
- LST ISO 4316:1997 Surface active agents. Determination of pH of aqueous solutions. Potentiometric method
- LST EN 61788-4-2011 Superconductivity -- Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2011)
- LST EN ISO 15091:2013 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)
Professional Standard - Petrochemical Industry, Potential Value Conductivity
- NB/SH/T 0836-2010 Determination of acidity of insulating liquids-Automatic potentiometric titration
- SH/T 0251-1993 Determination of Base Number of Petroleum Products (Perchloric Acid Potentiometric Titration Method)
VE-FONDONORMA, Potential Value Conductivity
American Petroleum Institute (API), Potential Value Conductivity
NL-NEN, Potential Value Conductivity
- NEN-ISO 7888:1994 Water quality.Determination of electrical conductivity(ISO 7888:1985)
- NEN 6591-1990 Rainwater- Determination of electrical conductivity by continuous flow analysis
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Potential Value Conductivity
- IEEE C37.106-1987 Guide for Abnormal Frequency Protection for Power Generating Plants
- IEEE 3-1943 GUIDING PRINCIPLES FOR THE SELECTION OF REFERENCE VALUES FOR ELECTRICAL STANDARDS
- IEEE 3-1962 GUIDING PRINCIPLES FOR THE SELECTION OF REFERENCE VALUES FOR ELECTRICAL STANDARDS
- IEEE 3-1942 GUIDING PRINCIPLES FOR THE SELECTION OF REFERENCE VALUES FOR ELECTRICAL STANDARDS
- IEEE C37.114-2014 Guide for Determining Fault Location on AC Transmission and Distribution Lines
- IEEE C37.114-2004 Guide for Determining Fault Location on AC Transmission and Distribution Lines
- IEEE 127-1963 STANDARD FOR AEROSPACE EQUIPMENT VOLTAGE AND FREQUENCY RATINGS
Military Standard of the People's Republic of China-General Armament Department, Potential Value Conductivity
NEMA - National Electrical Manufacturers Association, Potential Value Conductivity
- NEMA PV 5-1976 constant-potential-type electric utility (semiconductor static converter) battery chargers
IN-BIS, Potential Value Conductivity
Professional Standard - Energy, Potential Value Conductivity
Professional Standard - Coal, Potential Value Conductivity
- MT/T 690-1997 Determination of resistance on ground and mesa conducting statial electricity in detonator production line
European Association of Aerospace Industries, Potential Value Conductivity
- AECMA PREN 2853-1993 Aerospace Series Current Ratings for Electrical Cables with Conductor EN 2083 Revision 2
- AECMA PREN 2853-1998 Aerospace Series Current Ratings for Electrical Cables with Conductor EN 2083 Edition P 1
PT-IPQ, Potential Value Conductivity
ET-QSAE, Potential Value Conductivity
Professional Standard - Ocean, Potential Value Conductivity
- HY/T 267-2018 Testing method of seawater conductivity measuring instrument
Society of Automotive Engineers (SAE), Potential Value Conductivity
Gansu Provincial Standard of the People's Republic of China, Potential Value Conductivity
- DB62/T 2632-2015 Conductivity Method for Determination of Vitality of Alfalfa Seeds
机械电子工业部, Potential Value Conductivity
- JB 5842-1991 Die positioning rings for power semiconductor devices
未注明发布机构, Potential Value Conductivity
Guangdong Provincial Standard of the People's Republic of China, Potential Value Conductivity
- DB4401/T 115-2021 Potentiometric titration method for the determination of acid value of organic heat carrier
中国石油化工总公司, Potential Value Conductivity
- SH/T 0251-1992 Determination of base number of petroleum products (perchloric acid potentiometric titration)
NZ-SNZ, Potential Value Conductivity
- AS/NZS 1660.5.4:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.4: Fire Tests - Determination of Degree of Acidity of Gases Evolved During the Combustion of Materials Taken from Electric Cables by Measuring pH and Conductivity