ZH

RU

ES

Liquid sampling

Liquid sampling, Total:496 items.

In the international standard classification, Liquid sampling involves: Analytical chemistry, Insulating fluids, Petroleum products in general, Insulating materials, Equipment for the chemical industry, Test conditions and procedures in general, Hydraulic fluids, Wastes, Organic chemicals, Textile machinery, Products of the chemical industry, Equipment for petroleum and natural gas industries, Radiation measurements, Agricultural machines, implements and equipment, Kitchen equipment, Domestic, commercial and industrial heating appliances, Road vehicle systems, Rubber, Aerospace fluid systems and components, Fertilizers, Geology. Meteorology. Hydrology, Domestic safety, Aircraft and space vehicles in general, Fluid power systems, Farming and forestry, Materials for aerospace construction, Fuels, Spices and condiments. Food additives, Inorganic chemicals, Plant and equipment for the food industry, Lubricants, industrial oils and related products, Bottles. Pots. Jars, Particle size analysis. Sieving, Water quality, Small craft, Nuclear energy engineering, Non-destructive testing, Measurement of fluid flow, Fluid storage devices, Environmental protection, Semiconducting materials, Plastics, Special purpose vehicles, Air quality, Medical equipment, Protection against fire, Equipment for processing of minerals, Fasteners for aerospace construction, Installations in buildings, Paints and varnishes, Energy and heat transfer engineering in general, Solar energy engineering, Optics and optical measurements, Paint ingredients, Structures of buildings, Protective equipment, Laboratory medicine, Freight distribution of goods, Meat, meat products and other animal produce, Pumps, Inks. Printing inks, Protection against dangerous goods, Protection against excessive pressure, External water conveyance systems, Iron and steel products, Barrels. Drums. Canisters, Valves.


CZ-CSN, Liquid sampling

CU-NC, Liquid sampling

RU-GOST R, Liquid sampling

SE-SIS, Liquid sampling

U.S. Air Force, Liquid sampling

European Committee for Electrotechnical Standardization(CENELEC), Liquid sampling

International Electrotechnical Commission (IEC), Liquid sampling

VN-TCVN, Liquid sampling

BE-NBN, Liquid sampling

International Organization for Standardization (ISO), Liquid sampling

  • ISO 3170:2004 Petroleum liquids - Manual sampling
  • ISO 3170:1988 Petroleum liquids; manual sampling
  • ISO/WD 3170 Petroleum liquids — Manual sampling
  • ISO/DIS 3170:2023 Petroleum liquids — Manual sampling
  • ISO 2209:1973 Liquid halogenated hydrocarbons for industrial use; Sampling
  • ISO 3427:1976 Gaseous halogenated hydrocarbons (liquefied gases); Taking of a sample
  • ISO 3171:1988 Petroleum liquids; automatic pipeline sampling
  • ISO/WD 3171 Petroleum liquids — Automatic pipeline sampling
  • ISO 11217:1993 Aerospace; hydraulic system fluid contamination; location of sampling points and citeria for sampling
  • ISO/TR 9494:1997 Petroleum liquids — Automatic pipeline sampling — Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids
  • ISO 4364:1977 Liquid flow measurement in open channels; Bed material sampling
  • ISO 16665:2014 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
  • ISO 14887:2000 Sample preparation - Dispersing procedures for powders in liquids
  • ISO 14895:2016 Small craft - Liquid-fuelled galley stoves and heating appliances
  • ISO 6142:2001/Amd 1:2009 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method; Amendment 1: Liquid introduction
  • ISO 4021:1977 Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system
  • ISO 5884:1987 Aerospace; Fluid systems and components; Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
  • ISO 5884:2018 Aerospace series - Fluid systems and components - Methods for system sampling and measuring the solid particle contamination in hydraulic fluids
  • ISO 9057:1991 Glass containers; 28 mm tamper-evident finish for pressurized liquids; dimensions
  • ISO/TS 3716:2006 Hydrometry - Functional requirements and characteristics of suspended-sediment samplers
  • ISO 3716:2021 Hydrometry - Functional requirements and characteristics of suspended-sediment samplers
  • ISO 11500:2008 Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
  • ISO 11500:2022 Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
  • ISO 9057:1991/cor 1:2006 Glass containers - 28 mm tamper-evident finish for pressurized liquids - Dimensions; Technical Corrigendum 1

Association Francaise de Normalisation, Liquid sampling

  • NF M07-001*NF EN ISO 3170:2004 Petroleum liquids - Manual sampling
  • NF C27-475*NF EN 60475:2012 Method of sampling insulating liquids
  • NF C27-475:1975 Method of sampling liquid dielectrics.
  • NF M07-057*NF EN ISO 3171:1999 Petroleum liquids. Automatic pipeline sampling.
  • NF E48-653:1991 Hydraulic fluid power. Sampling bottles. Qualifying methods and lot inspection.
  • NF EN ISO 3171:1999 Produits pétroliers liquides - Échantillonnage automatique en oléoduc
  • NF U42-400:1996 Sampling of solid fertilizers and liming materials.
  • NF M07-076:1995 Liquid petroleum products. Retail outlet sampling.
  • FD X10-346:1996 Mesure de débit des liquides dans les canaux découverts - Échantillonnage des matériaux du lit
  • NF T90-371:2006 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna.
  • NF EN ISO 10248:1999 Engrais liquides - Désaération des échantillons de suspension par entraînement en couche mince
  • NF X11-710*NF ISO 14887:2000 Sample preparation - Dispersing procedures for powders in liquids.
  • NF J95-047*NF EN ISO 14895:2016 Small craft - Liquid-fuelled galley stoves and heating appliances
  • NF D35-001:1965 Choice of an individual heating unit (solid, liquid and gaseous fuels) according to the volume to be heated.
  • NF ISO 14887:2000 Préparation de l'échantillon - Procédures pour la dispersion des poudres dans les liquides
  • NF T20-030*NF EN ISO 4630:2016 Clear liquids - Estimation of colour by the Gardner colour scale
  • NF EN ISO 14895:2016 Petits navires - Réchauds de cuisine et appareils de chauffage alimentés par un combustible liquide
  • NF E48-654:1986 Hydraulic fluid power. Sampling bottles. Dimensions. Cleaning. Conditioning. Identification.
  • NF M07-077-2:1997 Produits pétroliers liquides - Échantillonnage de carburant au pistolet de distribution - Partie 2 : échantillonnage de grand volume, à un instant donné.
  • NF E31-503:1978 Heat machines.hot air generators with liquid fuels.
  • NF M07-112:2004 Produits pétroliers liquides - Dosage du benzène dans les combustibles liquides pour appareils mobiles de chauffage - Méthode par chromatographie capillaire en phase gazeuse
  • NF T30-048:1994 Paints and varnisches. Sampling of products in liquid or paste form.
  • NF P50-103:1988 Solar energy. Hot water tanks heated by heat transfer fluids. Vocabulary.
  • NF EN ISO 4630:2016 Liquides clairs - Évaluation de la couleur au moyen de l'échelle de couleur Gardner
  • NF E48-650:1986 Hydraulic fluid power. Fluids. Methods for bottle sampling from lines of an operating system.
  • NF X10-340*NF ISO 9195:1992 Liquid flow measurement in open channels. Sampling and analysis of gravel-bed material.
  • NF U42-080:1981 Fertilizers. Solutions and suspensions. Sampling for estimating the average contents of a batch.
  • NF EN ISO 10249:1999 Engrais liquides - Examen visuel préliminaire et préparation des échantillons pour essais physiques
  • NF M07-077-1:1997 Produits pétroliers liquides - Échantillonnage de carburant au pistolet de distribution - Partie 1 : échantillonnage représentatif de l'approvisionnement moyen de l'usager.
  • NF EN 14432:2014 Citernes de transport de matières dangereuses - Équipements de la citerne pour le transport de produits chimiques liquides et de gaz liquéfiés - Vannes de mise en pression de la citerne ou de déchargement du produit
  • NF H90-008:1992 Series 1 freitht containers. Specification and testing. Part 3 : tank containers for liquids, gases and pressurized dry bulk.
  • NF S92-036:2004 In vitro diagnostic medical devices - Single-use receptables for the collection of specimens, other than blood, from humans.
  • NF T20-520:1973 Sodium and potassium silicates for industrial use. Determination of density of samples in solution. Method using density hydrometer. Method using pyknometer.
  • NF ISO 11500:2023 Transmissions hydrauliques - Détermination du niveau de pollution particulaire d'un échantillon liquide par comptage automatique des particules par absorption de lumière
  • NF EN 14814:2016 Adhésifs pour systèmes de canalisations thermoplastiques pour liquides sous pression - Spécifications
  • NF EN 60076-2:2011 Transformateurs de puissance - Partie 2 : échauffement des transformateurs immergés dans le liquide
  • NF U44-108:1982 Boues des ouvrages de traitement des eaux usées urbaines - Boues liquides - Échantillonnage en vue de l'estimation de la teneur moyenne d'un lot

British Standards Institution (BSI), Liquid sampling

  • BS 5263:1975 Method for sampling liquid dielectrics
  • BS EN 60475:2011 Method of sampling insulating liquids
  • BS 5309-3:1976 Methods for sampling chemical products - Sampling of liquids
  • BS 5598-1:1978 Methods of sampling and test for halogenated hydrocarbons. Sampling of liquid products
  • BS 5598-2:1979 Methods of sampling and test for halogenated hydrocarbons. Sampling of liquefied gases
  • BS EN IEC 60475:2022 Tracked Changes. Method of sampling insulating liquids
  • 20/30412804 DC BS EN IEC 60475. Method of sampling insulating liquids
  • BS ISO 14887:2001 Sample preparation. Dispersing procedures for powders in liquids
  • BS ISO 14887:2000 Sample preparation - Dispersing procedures for powders in liquids
  • BS 4140-13:1986 Methods of test for aluminium oxide. Preparation of sample solution by treatment with hydrochloric acid under pressure
  • BS EN ISO 10248:1997 Fluid fertilizers - De-aeration of suspension samples by film disentrainment
  • BS ISO 11500:2008 Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
  • BS EN ISO 4630-1:2004 Clear liquids - Estimation of colour by the Gardner colour scale - Visual method
  • BS EN ISO 2812-4:2017 Tracked Changes. Paints and varnishes. Determination of resistance to liquids. Spotting methods
  • BS EN ISO 10248:2000 Fluid fertilizers - De-aeration of suspension samples by film disentrainment
  • BS ISO 8943:2007 Refrigerated light hydrocarbon fluids. Sampling of liquefied natural gas. Continuous and intermittent methods
  • 22/30429423 DC BS ISO 11500. Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
  • BS 7117-2:1991 Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel - Guide to installation
  • BS ISO 9057:1995 Glass containers - 28mm tamper-evident finish for pressurized liquids - Dimensions
  • BS EN ISO 4630-2:2004 Clear liquids - Estimation of colour by the Gardner colour scale - Spectrophotometric method
  • BS ISO 11500:2022 Tracked Changes. Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
  • BS EN ISO 3170:2004 Methods of test for petroleum and its products. BS 2000-475: Petroleum liquids. Manual sampling
  • BS EN 14254:2004 In vitro diagnostic medical devices - Single-use receptacles for the collection of specimens, other than blood, from humans
  • BS ISO 4126-10:2010 Safety devices for protection against excessive pressure. Sizing of safety valves for gas/liquid two-phase flow
  • BS DD ISO/TS 3716:2006 Hydrometry - Functional requirements and characteristics of suspended-sediment samplers
  • BS 5551 Sec.2.7:1988 Fertilizers. Sampling. Recommendations for minimum mass of increment of a solid fertilizer to be taken to be representative of the total sampling unit
  • BS 7117-3:1991 Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel - Guide to maintenance after installation
  • BS EN ISO 14895:2016 Tracked Changes. Small craft. Liquid-fuelled galley stoves and heating appliances
  • BS ISO 9057:1991 Glass containers. 28mm tamper-evident finish for pressurized liquids. Dimensions
  • 22/30426288 DC BS ISO 5352. Hydraulic fluid power. Determining discharge flow rate and thermal losses of gas loaded accumulators

German Institute for Standardization, Liquid sampling

  • DIN EN ISO 3170:2004 Petroleum liquids - Manual sampling (ISO 3170:2004); German version EN ISO 3170:2004
  • DIN EN ISO 3170 Berichtigung 1:2007-12 Petroleum liquids - Manual sampling (ISO 3170:2004); German version EN ISO 3170:2004, Corrigenda to DIN EN ISO 3170:2004-06
  • DIN EN ISO 3170:2004-06 Petroleum liquids - Manual sampling (ISO 3170:2004); German version EN ISO 3170:2004
  • DIN 51750-2:1990-12 Sampling of liquid petroleum products
  • DIN EN ISO 3171:2000 Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988); German version EN ISO 3171:1999
  • DIN EN ISO 3171:2000-11 Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988); German version EN ISO 3171:1999
  • DIN EN ISO 3170:2023-07 Petroleum liquids - Manual sampling (ISO/DIS 3170:2023); German and English version prEN ISO 3170:2023 / Note: Date of issue 2023-06-23*Intended as replacement for DIN EN ISO 3170 (2004-06), DIN EN ISO 3170 Berichtigung 1 (2007-12).
  • DIN EN ISO 10248:1999-07 Fluid fertilizers - De-aeration of suspension samples by film disentrainment (ISO 10248:1996); German version EN ISO 10248:1999
  • DIN ISO 14887:2010 Sample preparation - Dispersing procedures for powders in liquids (ISO 14887:2000)
  • DIN ISO 11217:1994 Aerospace; hydraulic system fluid contamination; location of sampling points and criteria for sampling; identical with ISO 11217:1993
  • DIN EN 16423:2014-02 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection; German version EN 16423:2013
  • DIN EN 60475:2012 Method of sampling insulating liquids (IEC 60475:2011); German version EN 60475:2011
  • DIN EN ISO 3170 Berichtigung 1:2007 Petroleum liquids - Manual sampling (ISO 3170:2004); German version EN ISO 3170:2004, Corrigenda to DIN EN ISO 3170:2004-06
  • DIN EN ISO 4630:2016-05 Clear liquids - Estimation of colour by the Gardner colour scale (ISO 4630:2015); German version EN ISO 4630:2015
  • DIN ISO 14887:2010-03 Sample preparation - Dispersing procedures for powders in liquids (ISO 14887:2000)
  • DIN EN ISO 2812-4:2018-03 Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017); German version EN ISO 2812-4:2017
  • DIN EN ISO 10249:1999-07 Fluid fertilizers - Preliminary visual examination and preparation of samples for physical testing (ISO 10249:1996); German version EN ISO 10249:1999
  • DIN EN ISO 4257:2002 Liquefied petroleum gases - Method of sampling (ISO 4257:2001); German version EN ISO 4257:2001
  • DIN EN 14254:2004 In vitro diagnostic medical devices - Single-use receptacles for the collection of specimens, other than blood, from humans; German version EN 14254:2004
  • DIN ISO 5884:1989 Aerospace; fluid systems and components; methods for system sampling and measuring the solid particle contamination of hydraulic fluids; identical with ISO 5884:1987
  • DIN EN ISO 14895:2016-11 Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016); German version EN ISO 14895:2016
  • DIN EN ISO 6717:2020 In vitro diagnostic medical devices - Single-use containers for the collection of specimens, other than blood, from humans (ISO/DIS 6717:2020); German and English version prEN ISO 6717:2020
  • DIN EN ISO 4630-1:2005 Clear liquids - Estimation of colour by the Gardner colour scale - Part 1: Visual method (ISO 4630-1:2004); German version EN ISO 4630-1:2004

Danish Standards Foundation, Liquid sampling

  • DS/EN ISO 3170:2004 Petroleum liquids - Manual sampling
  • DS/EN 60475:2012 Method of sampling insulating liquids
  • DS/EN ISO 3171:2000 Petroleum liquids - Automatic pipeline sampling
  • DS/ISO 3722:1989 Hydraulic fluid power. Fluid sample containers. Qualifying and controlling cleaning methods
  • DS/EN ISO 10248:2000 Fluid fertilizers - De-aeration of suspension samples by film disentrainment
  • DS/EN ISO 2812-4:2007 Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods
  • DS/ISO 6717:2021 In vitro diagnostic medical devices – Single-use containers for the collection of specimens from humans other than blood
  • DS/EN ISO 4630-1:2005 Clear liquids - Estimation of colour by the Gardner colour scale - Part 1: Visual method

国家市场监督管理总局、中国国家标准化管理委员会, Liquid sampling

ES-UNE, Liquid sampling

  • UNE-EN IEC 60475:2023 Method of sampling insulating liquids
  • UNE-EN ISO 4630:2016 Clear liquids - Estimation of colour by the Gardner colour scale (ISO 4630:2015)
  • UNE-EN ISO 14895:2016 Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016)
  • UNE-EN ISO 2812-4:2018 Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017)
  • ISO/DIS 8943:2023 Refrigerated light hydrocarbon fluids — Sampling of liquefied natural gas — Continuous and intermittent methods
  • UNE-EN ISO 6717:2022 In vitro diagnostic medical devices - Single-use containers for the collection of specimens from humans other than blood (ISO 6717:2021)

YU-JUS, Liquid sampling

Group Standards of the People's Republic of China, Liquid sampling

Indonesia Standards, Liquid sampling

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Liquid sampling

  • GB/T 4756-1998 Petroleum liquids--Manual sampling
  • GB/T 4756-2015 Method for manual sampling of petroleum liquids
  • GB/T 6680-2003 General rules for sampling liquid chemical products
  • GB/T 27867-2011 Petroleum liquid.Automatic pipeline sampling
  • GB/T 8570.1-1988 Liquefied anhydrous ammonia--Taking a laboratory sample
  • GB 10621-2006 Food additive liquid carbon dioxide
  • GB/T 23256-2009 Petroleum liquids.Automatic pipeline sampling.Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids
  • GB/T 20099-2006 Sample preparatio.Dispersing procedures for powders in liquids
  • GB 1917-1994 Food additive.Liquid carbon dioxide(From alcohol fermentation plant)
  • GB/T 11223.2-1989 Analytical determination of uranium in ash of biological samples—Laser liquid fluorimetry
  • GB/T 20603-2006 Refrigerated light hydrocarbon fluids Sampling of liquefied natural gas Continuous method
  • GB/T 22295-2008 Standard test method for color of transparent liquids(Gardner color scale)
  • GB/T 21403-2008 Irrigation equipment.Differential pressure Venturi-type liquid additive injectors
  • GB/T 8570.1-2008 Determination of liquefied anhydrous ammonia.Part 1:Taking a laboratory sample
  • GB 10621-1989 Food additive--Liquid carbon dioxide(from lime-kiln and ammonia plant off gases)
  • GB/T 12373-1990 Standard sampling equipments of liquid absorbent methods for determining gaseous pollutants in air of residential areas
  • GB/T 9281.1-2008 Clear liquids. Estimation of colour by the Gardner colour scale. Part 1: Visual method
  • GB/T 16563-1996 Series 1: Tank containers for liquids, gases and pressurized dry bulk--Specification and testing

IN-BIS, Liquid sampling

AENOR, Liquid sampling

  • UNE-EN 60475:2013 Method of sampling insulating liquids
  • UNE 70102:1984 GASEOUS HALOGENATED HYDROCARBONS (LIQUEFIED GASES). TAKING OF A SAMPLE
  • UNE-EN ISO 3170:2004 Petroleum liquids - Manual sampling (ISO 3170:2004)
  • UNE-EN ISO 3171:1999 PETROLEUM LIQUIDS. AUTOMATIC PIPELINE SAMPLING (ISO 3171:1988)
  • UNE 48077:1961 VISCOSITY OF TRANSPARENT LIQUIDS. (GARDNER-HOLDT METHOD)
  • UNE-ISO 8943:2005 Refrigerated light hydrocarbon fluids -- Sampling of liquefied natural gas -- Continuous method
  • UNE-EN ISO 10248:2001 Fluid fertilizers. De-aeration of suspension samples by film disentrainment.(ISO 10248:1996)
  • UNE-EN ISO 10249:2001 FLUID FERTILIZERS. PRELIMINARY VISUAL EXAMINATION AND PREPARATION OF SAMPLES FOR PHYSICAL TESTING. (ISO 10249:1996)

Korean Agency for Technology and Standards (KATS), Liquid sampling

  • KS M ISO 3171-2003(2018)
  • KS M ISO 10248:2006 Fluid fertilizers-De-aeration of suspension samples by film disentrainment
  • KS M ISO 10248:2013 Fluid fertilizers-De-aeration of suspension samples by film disentrainment
  • KS B ISO 3722:2007 Hydraulic fluid power-Fluid sample containers-Qualifying and controlling cleaning methods
  • KS B ISO 4364:2020 Measurement of liquid flow in open channels —Bed material sampling
  • KS B 6878-2011(2021) Cabinet heater cylinders for liquefied butane gas
  • KS I ISO 4021-2005(2020) Hydraulic fluid power-Particulate contamination analysis-Extraction of fluid samples from lines of an operating system
  • KS W ISO 5884:2007 Aerospace-Fluid systems and components-Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
  • KS B ISO 3722-2017(2022) Hydraulic fluid power-Fluid sample containers-Qualifying and controlling cleaning methods
  • KS M ISO 1552:2012 Liquid chlorine for industrial use-Method of sampling(for determining only the volumetric chlorine content)
  • KS M ISO 10248-2006(2011) Fluid fertilizers-De-aeration of suspension samples by film disentrainment
  • KS M ISO 10249-2006(2011) Fluid fertilizers-Preliminary visual examination and preparation of samples for physical testing
  • KS M ISO 1552:2013 Liquid chlorine for industrial use-Method of sampling(for determining only the volumetric chlorine content)
  • KS B ISO 15873:2022 Irrigation equipment — Differential pressure Venturi-type liquid additive injectors
  • KS B ISO 11500-2014(2019) Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
  • KS M ISO 10249:2006 Fluid fertilizers-Preliminary visual examination and preparation of samples for physical testing
  • KS M ISO 10249:2013 Fluid fertilizers-Preliminary visual examination and preparation of samples for physical testing
  • KS W ISO 5884-2007(2018) Aerospace-Fluid systems and components-Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
  • KS M ISO 4630-1-2010(2020) Clear liquids-Estimation of colour by the Gardner colour scale-Part 1:Visual method

American Society for Testing and Materials (ASTM), Liquid sampling

  • ASTM D5495-94 Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
  • ASTM D5495-94(2001) Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
  • ASTM D5495-21 Standard Practice for Sampling with a Composite Liquid Waste Sampler (COLIWASA)
  • ASTM D5495-03(2016) Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
  • ASTM D923-15 Standard Practices for Sampling Electrical Insulating Liquids
  • ASTM D923-89 Standard Methods of Sampling Electrical Insulating Liquids
  • ASTM E947-83(2007) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
  • ASTM D923-86 Standard Methods of Sampling Electrical Insulating Liquids
  • ASTM D923-97 Standard Practices for Sampling Electrical Insulating Liquids
  • ASTM F307-13(2020) Standard Practice for Sampling Pressurized Gas for Gas Analysis
  • ASTM D923-07 Standard Practices for Sampling Electrical Insulating Liquids
  • ASTM D6699-01(2010) Standard Practice for Sampling Liquids Using Bailers
  • ASTM D6699-01 Standard Practice for Sampling Liquids Using Bailers
  • ASTM D6699-16 Standard Practice for Sampling Liquids Using Bailers
  • ASTM D5495-03(2011) Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
  • ASTM D6759-02 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
  • ASTM D6759-07 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
  • ASTM D6759-09 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
  • ASTM D6759-16 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
  • ASTM F302-78(1996) Standard Practice for Field Sampling of Aerospace Fluids in Containers
  • ASTM D3437-10 Standard Practice for Sampling and Handling Liquid Cyclic Products
  • ASTM D3437-99 Standard Practice for Sampling and Handling Liquid Cyclic Products
  • ASTM E947-83(2002) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
  • ASTM E947-83(2015) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
  • ASTM C1052-96 Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
  • ASTM C1052-01 Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
  • ASTM C1052-01(2007) Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
  • ASTM D1265-11(2017)e1 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
  • ASTM C1052-20 Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
  • ASTM C1052-14 Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
  • ASTM F310-70(1996) Standard Practice for Sampling Cryogenic Aerospace Fluids
  • ASTM D4696-92(2000) Standard Guide for Pore-Liquid Sampling from the Vadose Zone
  • ASTM D6699-01(2006) Standard Practice for Sampling Liquids Using Bailers
  • ASTM F309-04(2018) Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
  • ASTM F309-70(1996) Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
  • ASTM F309-18 Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
  • ASTM F310-07(2020) Standard Practice for Sampling Cryogenic Aerospace Fluids
  • ASTM D4696-18 Standard Guide for Pore-Liquid Sampling from the Vadose Zone
  • ASTM D4696-92(2008) Standard Guide for Pore-Liquid Sampling from the Vadose Zone
  • ASTM D4598-87 Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Liquid Sorbent Diffusional Samplers
  • ASTM D3437-03 Standard Practice for Sampling and Handling Liquid Cyclic Products
  • ASTM D3437-08 Standard Practice for Sampling and Handling Liquid Cyclic Products
  • ASTM D3437-15(2022) Standard Practice for Sampling and Handling Liquid Cyclic Products
  • ASTM D3437-15 Standard Practice for Sampling and Handling Liquid Cyclic Products
  • ASTM E2451-21 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
  • ASTM E2144-01 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
  • ASTM E2144-01(2007) Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
  • ASTM D3437-11 Standard Practice for Sampling and Handling Liquid Cyclic Products
  • ASTM D117-22 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
  • ASTM E2451-08 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
  • ASTM D117-18 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
  • ASTM D3925-02(2022) Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
  • ASTM D7995-19 Standard Test Method for Total Water in Liquid Butane by Liquefied Gas Sampler and Coulometric Karl Fischer Titration
  • ASTM D3523-92(1997) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
  • ASTM F2196-02 Standard Specification for Circulating Liquid and Forced Air Patient Temperature Management Devices
  • ASTM E884-82(2006) Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities
  • ASTM D1544-04 Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
  • ASTM D4260-05(2012) Standard Practice for Liquid and Gelled Acid Etching of Concrete
  • ASTM D1544-04(2018) Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
  • ASTM D1544-04(2023) Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
  • ASTM F309-04 Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
  • ASTM D5854-19 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
  • ASTM F309-04(2010) Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
  • ASTM E947-22 Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
  • ASTM D5854-19a Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
  • ASTM D7670-10 Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
  • ASTM E2451-13 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
  • ASTM D1544-98 Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
  • ASTM D1544-04(2010) Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
  • ASTM E3245-20 Standard Guide for Systematic Approach to the Extraction, Analysis, and Classification of Ignitable Liquids and Ignitable Liquid Residues in Fire Debris Samples
  • ASTM E3245-20e1 Standard Guide for Systematic Approach to the Extraction, Analysis, and Classification of Ignitable Liquids and Ignitable Liquid Residues in Fire Debris Samples
  • ASTM D7353-21 Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
  • ASTM E1746-08 Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
  • ASTM D6866-21 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D6866-11 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D6866-16 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D6866-08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D6866-10 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D6866-22 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D6866-12 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D5743-21 Standard Practice for Sampling Single or Multilayered Liquids, with or Without Solids, in Drums or Similar Containers
  • ASTM E947-83(1996)e1 Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
  • ASTM D5854-96(2005) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
  • ASTM D7353-07 Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
  • ASTM D5854-96(2000) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
  • ASTM D5854-96(2010) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
  • ASTM D7353-07(2013) Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
  • ASTM D5854-96(2015) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

Standard Association of Australia (SAA), Liquid sampling

  • AS 1767.2.3:1999 Insulating liquids - Test methods - Method of sampling liquid dielectrics
  • AS 2872:2000 Atmospheric heating of vessels containing fluids - Estimation of maximum temperature
  • AS 4760:2006 Procedures for specimen collection and the detection and quantitation of drugs in oral fluid

Professional Standard - Agriculture, Liquid sampling

  • GB/T 6680-1986 General Rules for Sampling of Liquid Chemical Products
  • GB 8570.1-1988 Collection of laboratory samples of liquid anhydrous ammonia
  • SN/T 5493-2023 Determination of 29 Fentanyls in Solid and Liquid Samples by Liquid Chromatography-Quadrupole/Time-of-Flight Mass Spectrometry

ES-AENOR, Liquid sampling

Professional Standard - Petroleum, Liquid sampling

GOSTR, Liquid sampling

  • GOST 6859-1972 Apparatus for liquids sampling and measuring. Specifications

Lithuanian Standards Office , Liquid sampling

Japanese Industrial Standards Committee (JISC), Liquid sampling

  • JIS Z 4402:1993 Vials for liquid scintillation counting
  • JIS B 9937:2001 Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods
  • JIS Z 8824:2004 Sample preparation -- Dispersing procedures for powders in liquids
  • JIS Z 2343:1992 Method for liquid penetrant testing and classification of the indication
  • JIS W 2925:2002 Aerospace -- Hydraulic system fluid contamination -- Location of sampling points and criteria for sampling
  • JIS B 9934:2012 Hydraulic fluid power -- Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
  • JIS T 3254:2007 Single-use syringes for blood gas specimen collection
  • JIS T 3254:2013 Single-use syringes for blood gas specimen collection
  • JIS T 8031:2005 Clothing for protection against liquid chemicals -- Determination of the resistance of protective clothing materials to penetration by liquids under pressure
  • JIS T 8031:2010 Clothing for protection against liquid chemicals -- Determination of the resistance of protective clothing materials to penetration by liquids under pressure
  • JIS B 9936:2001 Hydraulic fluid power -- Particulate contamination analysis -- Extraction of fluid samples from lines of an operating system
  • JIS W 2923:2000 Aerospace -- Fluid systems and components -- Methods for system sampling and measuring the solid particle contamination of hydraulic fluids

Professional Standard - Machinery, Liquid sampling

SAE - SAE International, Liquid sampling

  • SAE ARP88-2004 HEATER@ AIRPLANE@ LIQUID TYPE
  • SAE ARP4268A-1994 Aerospace Hydraulic System Fluid Contamination - Location of Sampling Points
  • SAE J2890-2010 Hydraulic Fluid Power - Accelerated Method for Determining the Wear Characteristics of a Hydraulic Component Due to Contaminants
  • SAE ARP5376A-2003 Methods@ Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids
  • SAE ARP5376-1998 Methods@ Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids

ZA-SANS, Liquid sampling

  • SANS 158:2003 Electrical appliances for heating liquids
  • SANS 1435:2004 Biocides for use in emulsions of aqueous metal working fluid and aqueous hydraulic fluid

Hebei Provincial Standard of the People's Republic of China, Liquid sampling

TH-TISI, Liquid sampling

GM Europe, Liquid sampling

  • GME L 000 0642-2003 Dip phosphate make-up solution (liquid, nitrite accelerated) (English/German)
  • GME L 000 0639-2003 Spray phosphate replenisher solution (liquid, nitrite accelerated) (English/German)

Professional Standard - Commodity Inspection, Liquid sampling

  • SN/T 0975-2000 Method for sampling of petroleum and liquid petroleum products for import and export (automatic sampling)
  • SN/T 0826-1999 Method for sampling of petroleum and liquid petroleum products for import and export(manual sampling)
  • SN/T 3605-2013 Determination of mercury content in liquid petroleum products.Direct injection method
  • SN/T 1372-2004 Rules for the inspection of safety requirements for appliances of heating liquids for import and export

海关总署, Liquid sampling

  • SN/T 0975-2020 Sampling method for import and export of petroleum and liquid petroleum products (automatic sampling)

Professional Standard - Petrochemical Industry, Liquid sampling

  • SH/T 0635-1996 Liquid petroleum product sampling method (semi-automatic method)

U.S. Military Regulations and Norms, Liquid sampling

United States Navy, Liquid sampling

CA-SCC, Liquid sampling

工业和信息化部, Liquid sampling

未注明发布机构, Liquid sampling

  • BS ISO/TR 9494:1997(1999) Petroleum liquids — Automatic pipeline sampling — Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids
  • DIN EN 14252:2004 In-vitro diagnostics – disposable vessels for human specimens with the exception of blood samples; German version EN 14254:2004
  • BS ISO 8943:2007(2008) Refrigerated light hydrocarbon fluids — Sampling of liquefied natural gas — Continuous and intermittent methods
  • BS ISO 9057:1991(2009) Glass containers — 28 mm tamper - evident finish for pressurized liquids — Dimensions
  • BS EN ISO 3171:1999(2004)*BS 2000-476:2002 Methods of test for petroleum and its products — BS 2000 - 476 : Petroleum liquids — Automatic pipeline sampling

HU-MSZT, Liquid sampling

KR-KS, Liquid sampling

  • KS M ISO 2209-2017 Liquid halogenated hydrocarbons for industrial use — Sampling
  • KS B ISO 4364-2020 Measurement of liquid flow in open channels —Bed material sampling
  • KS M ISO 1552-2012 Liquid chlorine for industrial use-Method of sampling(for determining only the volumetric chlorine content)
  • KS B ISO 15873-2022 Irrigation equipment — Differential pressure Venturi-type liquid additive injectors

European Committee for Standardization (CEN), Liquid sampling

  • EN ISO 16665:2013 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna (ISO 16665:2014)
  • EN ISO 3170:2004 Petroleum liquids - Manual sampling (ISO 3170:2004)
  • EN ISO 3171:1999 Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
  • EN 21512:1994 Paints and Varnishes - Sampling of Products in Liquid or Paste Form (ISO 1512 : 1991)
  • EN ISO 10249:1999 Fluid Fertilizers - Preliminary Visual Examination and Preparation of Samples for Physical Testing
  • EN ISO 14895:2016 Small craft - Liquid-fuelled galley stoves and heating appliances
  • EN ISO 4630:2015 Clear liquids - Estimation of colour by the Gardner colour scale (ISO 4630:2015)
  • EN 12561-3:2002 Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure
  • EN 12561-3:2011 Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure
  • EN 14254:2004 In vitro diagnostic medical devices - Single-use receptacles for the collection of specimens, other than blood, from humans

CEN - European Committee for Standardization, Liquid sampling

  • EN ISO 16665:2005 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna

IT-UNI, Liquid sampling

NL-NEN, Liquid sampling

  • NEN 3350-1991 Steel tanks for underground storage of non-pressurerized liquids

American National Standards Institute (ANSI), Liquid sampling

  • ANSI/NFPA 87-2011 Recommended Practice for Fluid Heaters
  • ANSI/UL 2523-2013 Standard for Safety for Solid Fuel-Fired Hydronic Heating Appliances, Water Heaters, and Boilers
  • ANSI/UL 2523-2009 Standard for Safety for Solid Fuel-Fired Hydronic Heating Appliances, Water Heaters, and Boilers
  • ANSI/AWWA C300-2004 Reinforced Concrete Pressure Pipe, Steel Cylinder Type, for Water and Other Liquids
  • ANSI Z21.76 Addenda b-1993 Gas-fired unvented catalytic room heaters for use with liquefied petroleum (LP) gases; Addenda
  • ANSI Z21.76 Addenda a-1992 Gas-fired unvented catalytic room heaters for use with liquefied petroleum (LP) gases; Addenda

US-FCR, Liquid sampling

CH-SNV, Liquid sampling

AT-ON, Liquid sampling

  • ONORM M 7521-1976 Room-heating capacity of stoves for solid and liquid fuels
  • ONORM M 7105-1991 Basic concepts of energy economy — Extraction and processing of liquid fuels
  • OENORM H 7510-3-2021 Checking of heating systems - Part 3: Comprehensive verification of firing systems for liquid and gaseous fuels
  • OENORM H 7510-2-2021 Checking of heating systems - Part 2: Basic check of firing systems for liquid and gaseous fuels

AT-OVE/ON, Liquid sampling

Society of Automotive Engineers (SAE), Liquid sampling

  • SAE ARP4268A-1999 Aerospace Hydraulic System Fluid Contamination - Location of Sampling Points
  • SAE ARP4268-1989 AEROSPACE - HYDRAULIC SYSTEM FLUID CONTAMINATION - LOCATION OF SAMPLING POINTS
  • SAE MA2155/1-1991 Clamp, Rectangular Loop, Cushioned, with Wedge, Hydrocarbon Fluid Resistant, Aluminum, Metric
  • SAE AS85449/2-2003(R2007) Clamp assembly, saddle type, cushioned, phosphate ester fluid resistant
  • SAE MA2154/1-1991 Clamp, Rectangular, 2 Piece, Cushioned, with Wedges, Hydrocarbon Fluid Resistant, Metric
  • SAE ARP5376B-2010 Methods, Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids
  • SAE MA2155/2-1991 Clamp, Rectangular Loop, Cushioned, with Wedge, Hydrocarbon Fluid Resistant, Stainless Steel, Metric
  • SAE MA2154/2-1991 Clamp, Rectangular, 2 Piece, Cushioned, with Wedges, Phosphate Ester Fluid Resistant, Metric
  • SAE ARP5376C-2021 Methods, Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids

GM North America, Liquid sampling

Canadian General Standards Board (CGSB), Liquid sampling

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Liquid sampling

  • GJB 2007A-2005 General specification for liquid heater of armoured vehicles

Professional Standard - Automobile, Liquid sampling

  • QC/T 29105.3-1992 Sampling of test method for solid pollution degree of hydraulic oil in special automobile hydraulic system
  • QC/T 29105.3-2013 Sampling methods of testing particulate contamination of hydraulic oil of special purpose vehicle hydraulic system

Association of German Mechanical Engineers, Liquid sampling

  • VDI 3397 Blatt 2-2005 Maintenance of metalworking fluids - Measures for maintaining quality, and for reducing solid and liquid waste

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Liquid sampling

中华人民共和国环境保护部, Liquid sampling

  • GB 11223.2-1989 Analytical determination of uranium in ash of biological samples-Laser liquid fluorimetry

NATO - North Atlantic Treaty Organization, Liquid sampling

  • AEP-6(F)-2009 MANUAL OF TECHNIQUES OF SAMPLING AND ANALYSIS OF GASES AND LIQUEFIED GASES FOR AIRCRAFT SERVICING (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 7
  • AEP-6(E)-2003 MANUAL OF TECHNIQUES OF SAMPLING AND ANALYSIS OF GASES AND LIQUEFIED GASES FOR AIRCRAFT SERVICING (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 7
  • AEP-6(C)-2000 Manual of Techniques of Sampling and Analysis of Gases and Liquefied Gases for Aircraft Servicing (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 7
  • STANAG 3977-2008 Manual of Techniques of Sampling and Analysis of Gases and Liquefied Gases for Aircraft Servicing - AEP-(6E) (ED 3; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Ph
  • STANAG 3977-1997 Manual of Techniques of Sampling and Analysis of Gases and Liquefied Gases for Aircraft Servicing - AEP-6(A) (ED 2; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Ph
  • AEP-6(D)-2003 MANUAL OF TECHNIQUES OF SAMPLING AND ANALYSIS OF GASES AND LIQUIFIED GASES FOR AIRCRAFT SERVICING (Supersedes AEP-6(C); To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so
  • STANAG 3977-1991 Manual of Techniques of Sampling and Analysis of Gases and Liquefied Gases for Aircraft Servicing - AEP-6 (ED 1 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@

Professional Standard - Aerospace, Liquid sampling

US-CLSI, Liquid sampling

  • CLSI H18-A4-2010 Procedures for the Handling and Processing of Blood Specimens for Common Laboratory Tests

RO-ASRO, Liquid sampling

  • STAS SR ISO 5884:1996 Aerospace - Fluid systems and components - Methods for system sampling and measuring the soiid partide contamination of hydraulic fluids
  • STAS 7947/12-1988 CALCINATED ALUMINIUM OXIDE Sample disintegration methods and preparation of solution for analysis
  • STAS 11782-1980 Heating equipment for Plastic deformation purpose CHAMBER FURNACES HEATED WITH GAS OK LIQUID FUEL Main parameter*

FI-SFS, Liquid sampling

North Atlantic Treaty Organization Standards Agency, Liquid sampling

  • STANAG 3977-2009 MANUAL OF TECHNIQUES OF SAMPLING AND ANALYSIS OF GASES AND LIQUEFIED GASES FOR AIRCRAFT SERVICING - AEP-6

Professional Standard - Energy, Liquid sampling

  • NB/T 13002-2015 Compile regulation on process design package of processing and conversion for biomass liquid fuels

Defense Logistics Agency, Liquid sampling

PT-IPQ, Liquid sampling

  • NP EN ISO 10248:2001 Fluid fertilizers De-aeration of suspension samples by film disentrainment(ISO 10248:1996)

Canadian Standards Association (CSA), Liquid sampling

  • CSA B140.9.2-2010 Portable, pressurized-type, liquid-petroleum-fuelled camp stoves (Second Edition)

Compressed Gas Association (U.S.), Liquid sampling

  • CGA PS-7-2013 Safe transportation of compressed gas cylinders and crypginc liquid containers in passenger vehicles
  • CGA PS-7-2019 Safe transportation of compressed gas cylinders and crypginc liquid containers in passenger vehicles

Anhui Provincial Standard of the People's Republic of China, Liquid sampling

  • DB34/T 3425-2019 Liquid Helium Cooling Method for Superconducting Cyclotron Low-Temperature Superconducting Magnet

Professional Standard - Medicine, Liquid sampling

  • YY/T 0699-2008 Clothing for protection against liquid chemicals.Determination of the resistance of protective clothing materials to penetration by liquids under pressure

AR-IRAM, Liquid sampling

Underwriters Laboratories (UL), Liquid sampling

  • UL 307A-1995 Liquid fuel-burning heating appliances for manufactured homes and recreational vehicles

ESDU - Engineering Sciences Data Unit, Liquid sampling

  • ESDU 81003-1981 Vapour pressures and critical points of liquids. XVIII: additional esters of aliphatic carboxylic acids.

PL-PKN, Liquid sampling

  • PN E08223-01-1988 Safety óf household and similar electrical appliances Part 2: Particular requirements for appliances tor heating liouids

GB-REG, Liquid sampling

中华人民共和国国家卫生和计划生育委员会, Liquid sampling

  • GB 12373-1990 Standard sampling device for liquid absorption method of gaseous pollutants in the atmosphere of residential areas

National Health Commission of the People's Republic of China, Liquid sampling

  • GB 1886.215-2016 National Food Safety Standard Food Additive White Oil (also known as Liquid Paraffin)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved