ZH
RU
ES

Sample concentration

Sample concentration, Total:445 items.

In the international standard classification, Sample concentration involves: Metalliferous minerals, Water quality, Air quality, Construction materials, Test conditions and procedures in general, Road engineering, Laboratory medicine, Nuclear energy engineering, Protection against fire, Microbiology, Lubricants, industrial oils and related products, Geology. Meteorology. Hydrology, Linear and angular measurements, Machine tools, Fluid power systems, Photography, Fuels, Industrial automation systems, Manufacturing forming processes, Vocabularies, Burners. Boilers, Equipment for the chemical industry, Products of the textile industry, Analytical chemistry, Paint ingredients, Radiation measurements, Radiation protection, Protection against dangerous goods, Welding, brazing and soldering.

Professional Standard - Urban Construction, Sample concentration

CJ/T 524-2018 Odorant Concentration Monitor

CU-NC, Sample concentration

NC 44-07-1986 Ores. Gobalt and Nickel Sulfide Concentrate. Sampling

Canadian General Standards Board （CGSB), Sample concentration

CGSB 1-GP-71 METH 4.7-1974 Methods of Testing Paints and Pigments Consistency Consistency of Putty by Means of Gardner Mobilometer

Standard Association of Australia （SAA）, Sample concentration

AS 2884.4:1997 Heavy mineral sand concentrates - Sampling - Determination of precision and bias
AS/NZS 2891.14.5:1999 Methods of sampling and testing asphalt - Field density tests - Density ratio of compacted asphalt
AS 2636:1994 Sampling of venous and capillary blood for the determination of lead or cadmium concentration
AS 2891.7.1:2004 Methods of sampling and testing asphalt - Determination of maximum density of asphalt - Water displacement method
AS 2891.9.1:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Waxing procedure
AS 2891.9.2:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Presaturation method
AS 2891.9.3:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Mensuration method
AS 2891.7.3:2005 Methods of sampling and testing asphalt - Determination of maximum density of asphalt - Methylated spirits displacement

IT-UNI, Sample concentration

UNI 7115-1972
UNI 7118-1972
UNI ISO 11665-4:2021 Measurement of radioactivity in the environment -- Air: radon-222 - Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis

American Society for Testing and Materials (ASTM), Sample concentration

ASTM D3977-97(2013) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3977-97(2019) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3977-97(2013)e1 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D6582-00(2005)e1 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D6582-00 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D6582-00(2005) Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D5835-95 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D5835-95(2001) Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM E1413-06 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM D5835-20 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D5835-95(2013) Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM E2657-21 Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
ASTM E2657-16 Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
ASTM E2250-02 Standard Method for Determination of Endotoxin Concentration in Water Miscible Metal Working Fluids
ASTM E1413-07 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E2657-11 Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
ASTM D7872-13(2018) Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
ASTM D7872-13(2022) Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
ASTM D7872-13 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
ASTM D6327-98 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM D6327-98(2004) Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM D7687-23 Red Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration (Standard + Redline PDF Bundle)
ASTM D6327-10 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM D7687-21 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D7687-17 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D7687-23 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D6756-02 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D6756-10(2015) Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D5756-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
ASTM D5756-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
ASTM E1413-00 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E1413-00(2005) Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E1413-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration onto an Adsorbent Tube
ASTM E3189-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Static Headspace Concentration onto an Adsorbent Tube
ASTM E1412-95 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
ASTM D5755-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Concentrations
ASTM E1412-00(2005) Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
ASTM D5755-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Concentrations
ASTM E1412-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Activated Charcoal
ASTM D6480-05(2010) Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy
ASTM D6327-10(2021) Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM D6327-10(2016) Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM E2330-19 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons

RU-GOST R, Sample concentration

GOST R ISO 10396-2006 Stationary source emissions. Sampling for the automated determination of gas concentrations
GOST R ISO 16000-7-2011 Indoor air. Part 7. Sampling strategy for determination of airborne asbestos fibre concentrations
GOST 30527-1997 Metal-cutting machines. Checking methods of product specimen working accuracy
GOST R ISO 10396-2012 Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
GOST R 50591-1993 Gas-consuming thermal units. Industrial gas-burners. Limiting concentration rates of NOx in combustion products
GOST 25443-1982 Metal-cutting machines. Product specimens for control of working aceuracy. General technical requirements
GOST R 52716-2007 Work-place air. Determination of mass concentration of carbon monoxide. Method using detector tubes for short-term sampling with direct indication
GOST R 52717-2007 Work-place air. Determination of mass concentration of nitrogen dioxide. Method using detector tubes for short-term sampling with direct indication
GOST ISO 18153-2011 In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials

HU-MSZT, Sample concentration

MSZ 14352-1978

RO-ASRO, Sample concentration

STAS SR ISO 10275-1:1997 PI aste rs - General specification sample preparing, preparation of normal consistency paste and determination of white degree

CH-SNV, Sample concentration

VSM 23745.2-1967
SN EN 17346-2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

British Standards Institution (BSI), Sample concentration

BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
BS EN 16339:2013 Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
BS EN ISO 16000-7:2007 Indoor air. Sampling strategy for determination of airborne asbestos fibre concentrations
BS EN 17346:2020 Ambient air. Standard method for the determination of the concentration of ammonia using diffusive samplers
BS EN 13205-4:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations
19/30367217 DC BS EN 17346. Ambient Air Quality. Standard method for the determination of the concentration of ammonia by diffusive sampling
BS EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Sampling of PCDDs/PCDFs
BS PD CEN/TR 13205-3:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Analysis of sampling efficiency data
BS ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
BS EN 13205-1:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. General requirements
BS EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Automated pumped sampling with in situ gas chromatography
BS PD CEN/TS 1948-5:2015 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Long-term sampling of PCDDs/PCDFs and PCBs
BS EN 14412:2004 Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
BS EN 14412:2004(2009) Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
BS EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-1:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 1948-4:2010+A1:2013 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs
BS EN 16161:2012 Water quality. Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples
BS EN 13205-2:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on determination of sampling efficiency
BS EN 13205-5:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Aerosol sampler performance test and sampler comparison carried out at workplaces
BS DD CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Sampling and analysis of dioxin-like PCBs
BS EN 13205-6:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Transport and handling tests
BS EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 14662-4:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-5:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-2:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - General requirements
BS EN 14662-3:2015 Tracked Changes. Ambient air. Standard method for the measurement of benzene concentrations. Automated pumped sampling with in situ gas chromatography
BS 2634-2:1987 Roughness comparison specimens. Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens
BS 2634-2:2010 Roughness comparison specimens. Part 2: Specification for spark-eroded, shot?blasted, grit-blasted and polished specimens
DD CEN/TS 1948-4:2007 Stationary source emissions — Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs — Part 4: Sampling and analysis of dioxin-like PCBs
BS EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS EN 13528-3:2003(2008) Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS EN 13528-2:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Specific requirements and test methods
BS EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
BS ISO 11665-4:2012 Measurement of radioactivity in the environment. Air: radon-222. Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
BS PD CEN/TS 13649:2014 Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Sorptive sampling method followed by solvent extraction or thermal desorption
BS EN ISO 15011-3:2002 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Determination of ozone concentration using fixed point measurements
BS EN 1948-4:2010 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs

International Organization for Standardization (ISO), Sample concentration

ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
ISO 10396:1993 Stationary source emissions; sampling for the automated determination of gas concentrations
ISO 11598:1995 Requirements for representative sampling of uranyl nitrate solutions for the determination of uranium concentration
ISO 12803:1997 Representative sampling of plutonium nitrate solutions for determination of plutonium concentration
ISO 16000-7:2007 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
ISO 25597:2013 Stationary source emissions - Test method for determining PM<(Index)2,5> and PM<(Index)10> mass in stack gases using cyclone samplers and sample dilution
ISO 5990:1996 Photography - Processing chemicals - Specifications for potassium sulfite, 650 g/l aqueous solution
ISO 8761:1989 Work-place air; determination of mass concentration of nitrogen dioxide; method using detector tubes for short-term sampling with direct indication
ISO 2632-1:1985 Roughness comparison specimens; Part 1 : Turned, ground, bored, milled, shaped and planed
ISO 8760:1990 Work-place air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication
ISO 8761:1989/cor 1:2009 Work-place air - Determination of mass concentration of nitrogen dioxide - Method using detector tubes for short-term sampling with direct indication; Technical Corrigendum 1
ISO 8760:1990/cor 1:2009 Work-place air - Determination of mass concentration of carbon monoxide - Method using detector tubes for short-term sampling with direct indication; Technical Corrigendum 1
ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials
ISO 11665-4:2021 Measurement of radioactivity in the environment - Air: radon-222 - Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis

VN-TCVN, Sample concentration

TCVN 6157-1996 Ambient air.Determination of the mass concentration of ozone.Chemiluminescence method
TCVN 7556-1-2005 Health care solid waste incinerators.Determination of the mass concentration of PCDDs/PCDFs.Part 1: Sampling
TCVN 6192-2010 Stationary source emmissions.Sampling for the automated determination of gas emission concentrations for permanently.installed monitoring systems
TCVN 5754-1993 Work place air.Methods for determination of mass concentration of toxic gases and vapours.General sampling methods

German Institute for Standardization, Sample concentration

DIN EN 16339:2013-11 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling; German version EN 16339:2013
DIN EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
DIN EN 13205-4:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014
DIN EN ISO 16000-7:2007 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations (ISO 16000-7:2007); English version of DIN EN ISO 16000-7:2007-11
DIN 18555-2:1982 Testing of mortars containing mineral binders; freshly mixed mortars containing aggregates of dense structure (heavy aggregates); determination of consistence, bulk density and air content
DIN EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs English version of DIN EN 1948-1:2006-06
DIN EN 1948-1:2006-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs; German version EN 1948-1:2006
DIN EN ISO 16000-7:2007-11 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations (ISO 16000-7:2007); German version EN ISO 16000-7:2007
DIN EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014
DIN EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling; German version EN 16339:2013
DIN 58932-1:2012 Haematology - Determination of the concentration of blood corpuscles in blood - Part 1: Blood collection, sample preparation, biological influence factors, interference factors; Text in German and English
DIN EN 16161:2012-09 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples; German version EN 16161:2012
DIN 58932-1:1996 Haematology - Determination of the concentration of blood corpuscles in blood - Part 1: Blood collection, sample preparation, biological influence factors, interference factors
DIN EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
DIN EN 13205-1:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements; German version EN 13205-1:2014
DIN ISO 2889 Bb.2:2012 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 2: Assessment of the changes in the concentration of aerosol particles due to non-isokinetic sampling
DIN EN 13205-2:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency; German version EN 13205-2:2014
DIN EN 13205-5:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces; German version EN 13205-5:2014
DIN EN 14662-3:2016-02 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2015
DIN EN 14412:2004-12 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
DIN 58932-1:2023-08 Haematology - Determination of the concentration of blood corpuscles in blood - Part 1: Blood collection, sample preparation, influence quantities, interference factors; Text in German and English
DIN EN 13205-6:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests; German version EN 13205-6:2014
DIN CEN/TS 1948-5:2015-06*DIN SPEC 33970:2015-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs; German version CEN/TS 1948-5:2015
DIN ISO 2889 Beiblatt 2:2012-08 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 2: Assessment of the changes in the concentration of aerosol particles due to non-isokinetic sampling
DIN EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance; German version EN 13528-3:2003
DIN 58932-1:2023 Haematology - Determination of the concentration of blood corpuscles in blood - Part 1: Blood collection, sample preparation, biological influence factors, interference factors; Text in German and English
DIN EN 14662-4:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN 14662-1:2022-09 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German and English version prEN 14662-1:2022 / Note: Date of issue 2022-07-29*Intended as r...
DIN EN 13528-3:2004-04 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance; German version EN 13528-3:2003
DIN EN 14662-1:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005 / Note: To be replaced by DIN EN 14662-1 (2022-09).
DIN 53165:1997 Testing of pigments and extenders - Determination of the relative scattering power of white pigments for different pigment volume concentrations (P.V.C.) - Grey paste method
DIN EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2005
DIN EN 14662-2:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005
DIN EN 14662-5:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography; German version EN 14662-5:2005
DIN EN 1948-4:2014-03 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version EN 1948-4:2010+A1:2013
DIN EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005
DIN CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version CEN/TS 1948-4:2007
DIN EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005
DIN EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography; German version EN 14662-5:2005
DIN EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces; German version EN 13205-5:2014
DIN EN 13528-1:2002-12 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements; German version EN 13528-1:2002
DIN CEN/TS 13649:2015-03*DIN SPEC 33969:2015-03 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption; German version CEN/TS 13649:2014
DIN EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency; German version EN 13205-2:2014
DIN EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements; German version EN 13205-1:2014
DIN EN 14662-3:2016 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2015

PL-PKN, Sample concentration

PN Z04112-06-1990 Air purity protection Tests for vinyl chloride Determination of vinyl chloride in ambient air (immission) by gas chromatography with sample enrichment
PN-EN 17346-2020-11 E Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers
PN Z04015-05-1989 Air purity protectión Tests for sulphur and its compounds Determination of carbon disulphide in ambient air (imision) by gas chromatography with sample enrichment
PN Z04111-03-1989 Air purity protection "Microbiological testings Determination number of the fungi in the atmospheric air (imision) wiht sampling by aspiration and sedimentation method
PN Z04158-03-1986 Air purity protection ests of ethers etermination of izopropyl ther in work places by gas hromatography with sample nrichment
PN Z04166-02-1986 Air purity protection ests for octane etermination of octane in work laces by gas chromatography ith sample enrichment
PN Z04174-02-1986 Air purity protection ests for buthoxyethyl alcohol etermination of 2-buthoxyethyl lkohol in work places by gas hromatography with sample nrichment
PN Z04187-02-1988 Air purity protection ests for chloroform etermination of chloroform at work laces by gas chromatography with ample enrichment
PN Z04191-02-1988 Air purity protection Tests for ethylenediamine Determination of ethylenediamine in work places by gaschromatography with sample enrichment
PN Z04092-08-1989 Air purity protection Tests for nitric acid and nitrogen oxides Determination of nitrogen dioxide in ambient air (imision) by spectrophotometric method with passive sampling
PN Z04189-02-1988 Air purity protection ests tor aminodiphcnyl etermination ot 4-aminodiphcnyl t work places by gas hromalography' with sample nrichment
PN Z04195-02-1988 Air punty protection ests for hexarnethylphosphotriamide etermination of examethylphosphotriamide in work laces by gas chromatography ith sample nrichment
PN Z04052-10-1990 Air purity protection Tests for chlorophenols Determination of o-chlorophenol in permanent residence area air by gas chromatography with sample enrichment
PN Z04079-10-1990 Air purity protection ? Tests for cresols Determina?ion of cresols in pennanenl residence area air by gas chromatography with sample enrichment
PN Z04163-02-1986 Air purity protection ests for cyklohexene etermination of cyklohexene n work places by gas chromatography ith sample enrichment
PN Z04164-02-1986 Air purity protection ests for methyl bromide etermination of methyl bromide n work places by gas chromatography ith sample enrichment
PN Z04167-02-1986 Air purity protection ests for methoxyethyl alcohol etermination of 2-methoxyethyl lcohol in work places by gas hromatography with sample nrichment
PN Z04151-02-1986 Air purity protection Tests for cyclohexane Determination of cyclohexane in work places by gas chromatography with sample enrichment
PN Z04152-02-1986 Air purity protection Tests for styrene Determination of styrene in work places by gas chromatography with sample enrichment
PN Z04112-10-1989 Air purity protection , Tests for vinyl chloride Determination of vinyl chloride in permanent residence area air by gas chromatography with sample enrichment
PN Z04151-10-1990 Air purity protection Tests for cyclohexane Determination of cyclohexane in permanent residence area air by gas chromatography with sample enrichment
PN Z04160-02-1986 Air purity protection ests for methyl iodide etermination of methyl iodide in ork places by gas chromatography ith sample enrichment
PN Z04162-02-1986 Air punty protection ests for diethylamine etermination of diethylamine n work places by gas hromatography with sample nrichment
PN Z04158-02-1986 Air purity protection ests for ethers etermination of diethyl ether in work laces by gas chromatography with ample enrichment
PN Z04179-02-1987 Air purity protection ests for trichloroethane etermination of 1,1,1-trichloroethane n work places by gas hromatography with sample nrichment
PN Z04179-03-1987 Air purity protection ests for trichloroethane etermination of 1,1,2-trichloroethane n work places by gas chromatography ith sample enrichment
PN Z04190-02-1988 Air purity protection ests for nitrodiphenyl etermination of 4-nitrodiphenyl at ork places by gas chromatography ith sample enrichment
PN Z04004-02-1990 Air purity protection Tests for 2-ethoxyethyl alcohol Determination of 2-ethoxyethyl alcohol in work places by gas chromatography with sample enrichment
PN Z04004-10-1991 Air purity protection Tests for 2-ethoxyethyl alcohol Determination of 2-ethoxyethyl alcohol in permanent residence area air by gas chromatography with sample enrichment
PN Z04022-10-1989 Air purity protection Tests for chlorobenzenes Determination of chlorobenzene and dichlorobenzenes in permanent residence area air by gas chromatography with sample enrichment
PN Z04178-02-1987 Air purity protection ests for vinyl acetate etermination of vinyl acetate n work places by gas chromatography ith sample enrichment
PN Z04184-02-1988 Air purity protection Tests for 2-methoxyethyl acetate Determination of 2-methoxyethyl= acetate in work places by gas chromatography with sample enrichment
PN Z04217-10-1991 Air purity protection Tests for maleic anhydrideDetermination of maleic anhydride vapours in permanent residence area air by gas chromatography with sample enrichment
PN Z04113-10-1990 Air punty protection Tests for acrylic compounds Determination of acrylonitryle in permanent residence area air by gas chromatography with sample enrichment
PN Z04199-02-1988 Air purity protection ests for iV-nitrosoamines etermination f N-nitrosodimethylamine n work places by gas chromatography ith sample enrichment
PN Z04113-05-1986 Air purity protection Tests for acrylic compounds Determination of methyl acrylate in work places by gas chromatography with sample enrichment
PN Z04113-06-1986 Air purity protection Tests for acrylic compounds Determination of butyl acrylate in work places by gas chromatography with sample enrichment
PN Z04159-10-1989 Air purity protection ests for phenol etermination of phenol in permanent esidence area air by gas hromatography with sample nrichment
PN Z04031-04-1988 Air purity protection Tests for anilin? and its compounds Determination of o-nitroaniline in work places by gas chromatography with sample enrichment
PN Z04031-05-1988 Air purity protection Tests for anilin? and its compounds Determination of m-nitroaniline in work places by gas chromatography with sample enrichment
PN Z04031-06-1988 Air purity protection Tests for anilin? and its compounds Determination of/j-nitroaniline in work places by gas chromatography with sample enrichment
PN Z04032-10-1991 Air purity protection -- Tests for 4-cumylophenole -- Determination of 4-cumylophenole in permanent residence area air by gas chromatography with sample enrichment
PN Z04045-10-1990 Air purity protection Tcsts lor aldehydes Dctermination of formaldehyde in pcrmanent residence area air by uas chromatooraphy with sample cnrichment
PN Z04155-10-1990 Air purity protection ests for butyl alcohol etermination of isobutyl and H-butyl lcohol in permanent residance area air y gas chromatography with sample nrichment
PN Z04192-02-1988 Air purity protection Tests for hexachlorobutadiene-l,3 Determination of hexachlorobutadiene-l,3 in work places by gas chromatography with sample enrichment
PN Z04197-02-1988 Air punty protection Tests for 2-ethoxyethyl acetate Determination of 2-ethoxyethylacetate in work places by gas chromatography with sample enrichment

Association Francaise de Normalisation, Sample concentration

NF M60-412:1998 Requirements for representative sampling of uranyl nitrate solutions for the determination of uranium concentration.
NF X43-028*NF EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
NF X43-324:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Part 1 : Sampling.
NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
NF EN 16339:2013 Air ambiant - Méthode pour la détermination de la concentration du dioxyde d'azote au moyen d'échantillonneurs par diffusion
NF X43-710:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Part 1 : measurement at low concentrations by use of impactors.
FD X43-284*FD CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
NF X43-283-4*NF EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4 : laboratory performance test based on comparison of concentrations
FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
NF X43-404-7*NF EN ISO 16000-7:2007 Indoor air - Part 7 : sampling strategy for determination of airborne asbestos fibre concentrations
NF EN ISO 16000-7:2007 Air intérieur - Partie 7 : stratégie d'échantillonnage pour la détermination des concentrations en fibres d'amiante en suspension dans l'air
FD CEN/TR 15547:2007 Atmosphères des lieux de travail - Calcul de la concentration en fractions d'aérosols liées à la santé à partir de la concentration mesurée à l'aide d'un dispositif de prélèvement ayant des caractéristiques de performances connues
GA X46-033:2012 Application guide for NF EN ISO 16000-7 - Sampling strategy for the determination of airborne asbestos fibre concentrations
NF ISO 10396:2007 Émissions de sources fixes - Échantillonnage pour la détermination automatisée des concentrations d'émission de gaz pour des systèmes fixes de surveillance
NF P18-511-7*NF EN 14488-7:2006 Testing sprayed concrete - Part 7 : fibre content of fibre reinforced concrete
NF ISO 25597:2014 Émissions de sources fixes - Méthode d'essai pour la détermination de la concentration en masse de PM 2,5 et PM 10 dans les gaz émis à la cheminée en utilisant des échantillonneurs cyclone et une dilution d'échantillon
NF EN 13205-5:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 5 : essais de performances des échantillonneurs d'aérosols, réa...
NF X43-553*NF ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems.
NF X43-324-1*NF EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1 : sampling of PCDDs/PCDFs
NF EN 1948-1:2006 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 1 : prélèvement des PCDD/PCDF
NF EN 16161:2012 Qualité de l'eau - Lignes directrices pour l'utilisation de techniques d'absorption in vivo pour l'estimation de la concentration de chlorophylle-a dans des échantillons d'eau de mer et d'eau douce
NF X43-063*NF EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentration of gases and vapours - Guide for selection, use and maintenance
NF T90-455:2015 Water quality - Sampling and/or enumeration of Cryptosporidium oocystes and Giardia cysts - Concentration and enumeration method
NF T90-207*NF EN 16161:2012 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples.
NF X43-324-4/IN1*NF EN 1948-4/IN1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
NF ISO 8760:1990 Air des lieux de travail - Détermination de la concentration en masse du monoxyde de carbone - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
NF ISO 8761:1990 Air des lieux de travail - Détermination de la concentration en masse du dioxyde d'azote - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
NF EN 14412:2004 Qualité de l'air intérieur - Échantillonnage par diffusion pour la détermination de la concentration des gaz et des vapeurs - Guide pour la sélection, l'utilisation et la maintenance
NF X43-283-1*NF EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1 : general requirements
FD CEN/TR 13205-3:2014 Exposition sur les lieux de travail - Évaluation des performances des instruments de mesurage des concentrations d'aérosols - Partie 3 : Analyse des données d'efficacité de prélèvement
NF X43-283-5*NF EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5 : aerosol sampler performance test and sampler comparison carried out at workplaces
XP X43-324-5*XP CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5 : long-term sampling of PCDDs/PCDFs and PCBs
XP CEN/TS 1948-5:2015 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 5 : prélevement à long terme de PCDD/PCDF et PCB
NF EN 14662-3:2015 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 3 : prélèvement par pompage automatique avec analyse chromatographique en phase gazeuse sur site
NF EN 14662-5:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration de benzène - Partie 5 : prélèvement par diffusion suivi d'une désorption au solvant et d'une chromatographie gazeuse
NF EN 14662-2:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 2 : prélèvement par pompage suivi d'une désorption au solvant et d'une méthode de chromatographie en phase gazeuse
NF X43-283-2*NF EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2 : laboratory performance test based on determination of sampling efficiency
NF X43-255*NF ISO 8761:1990 Work-place air. Determination of mass concentration nitrogen dioxide. Method using detector tubes for short-term sampling with direct indication.
FD X43-283-3*FD CEN/TR 13205-3:2014 Workplace exposure - Assessment of performance of instruments for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
NF EN 13205-1:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 1 : exigences générales
NF EN 14662-1:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 1 : échantillonnage par pompage suivi d'une désorption thermique et d'une méthode chromatographie en phase gazeuse
NF M60-763-4*NF ISO 11665-4:2021 Measurement of radioactivity in the environment - Air : radon-222 - Part 4 : integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
NF X43-029-3:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography.
NF X43-324-4*NF EN 1948-4+A1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
NF X43-283-6*NF EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6 : transport and handling tests
NF X43-029-2*NF EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : pumped sampling followed by solvent desorption and gas chromatography
NF EN 1948-4/IN1:2014 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 4 : prélèvement et analyse des PCB de type dioxine
NF EN 1948-4+A1:2014 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 4 : prélèvement et analyse des PCB de type dioxine
NF M60-312-1:2019 Nuclear energy - Measurement of radioactivity in the environment - Determination of tritium activity in the air - Part 1 : determination of the activity concentration of atmospheric tritium sampled by the sparging technique (air through water)
NF X43-029-5*NF EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5 : diffusive sampling followed by solvent desorption and gas chromatography.
NF X43-254*NF ISO 8760:1990 Work-place air. Determination of mass concentration of carbon monoxide. Method using detector tubes for short-term sampling with direct indication.
NF EN 13528-1:2003 Qualité de l'air - Echantillonneurs par diffusion pour la détermination des concentrations des gaz et des vapeurs - Prescriptions et méthodes d'essai - Partie 1: prescriptions générales
NF ISO 11665-4:2021 Mesurage de la radioactivité dans l'environnement - Air : radon-222 - Partie 4 : méthode de mesure intégrée pour la détermination de l'activité volumique moyenne du radon avec un prélèvement passif et une analyse en différé
NF M60-312:1999 Nuclear energy. Measurement of environmental radioactivity-Air. Determination by liquid scintillation of the activity concentration of atmospheric tritium sampled by the sparging technique (air through water).
NF X43-060-1*NF EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1 : general requirements
NF X43-029-1*NF EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : pumped sampling followed by thermal desorption and gas chromatography
NF X43-029-3*NF EN 14662-3:2015 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography
NF EN 13205-6:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 6 : essais de manipulation et de transport
NF X43-295:1995 Air des lieux de travail - Détermination par rayons X de la concentration de dépôt alvéolaire de silice cristalline - Échantillonnage par dispositif à coupelle rotative.
NF EN 14662-4:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 4 : échantillonnage par diffusion suivi d'une désorption thermique et d'une chromatographie en phase gazeuse
NF S92-022*NF EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials.
NF X43-029-4*NF EN 14662-4:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 4 : diffusive sampling followed by thermal desorption and gas chromatography
XP X43-341*XP CEN/TS 13649:2015 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling methode followed by solvent extraction or thermal desorption
XP CEN/TS 13649:2015 Émissions de sources fixes - Détermination de la concentration massique en composés organiques gazeux individuels - Échantillonnage par adsorption et extraction par solvant ou thermodésorption
NF X43-060-3*NF EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3 : guide to selection, use and maintenance.

European Committee for Standardization (CEN), Sample concentration

EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
EN ISO 16000-7:2007 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
PD CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
EN 16161:2012 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples
EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
EN 1948-1:1996 Stationary Source Emissions - Determination of the Mass Concentration of PCDDs/PCDFs - Part 1: Sampling
EN 14662-3:2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
EN 14662-3:2015 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs
EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
PD CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements
EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography
PD CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs
EN 13528-2:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods
EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
EN 1948-4:2010 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs (Incorporates Amendment A1: 2013)

Danish Standards Foundation, Sample concentration

DS/EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
DS/CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
DS/EN ISO 16000-7:2007 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
DS/ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
DS/EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
DS/EN 16161:2012 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples
DS/ISO 2632-1:1989 Roughness comparison specimens. Part 1: Turned, ground, bored, milled, shaped and planed
DS/EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
DS/EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
DS/EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
DS/EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography
DS/EN 1948-4:2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
DS/EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
DS/EN 14662-3:2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
DS/EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements

AENOR, Sample concentration

UNE-EN 16339:2014 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
UNE-EN 13205-4:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
UNE-CEN/TR 13205-3:2015 IN Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
UNE-EN ISO 16000-7:2009 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations (ISO 16000-7:2007)
UNE-ISO 10396:2009 Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
UNE-EN 1948-1:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
UNE-EN 16161:2013 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples
UNE-EN 14662-4:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
UNE-EN 14662-1:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
UNE-EN 14412:2005 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
UNE-EN 13205-5:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
UNE-EN 13205-1:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
UNE-EN 13205-2:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
UNE-EN 1948-4:2011+A1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
UNE-EN 13205-6:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
UNE-EN 14662-2:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography
UNE-EN 14662-5:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
UNE-EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
UNE 73340-3:2004 Procedure to obtain samples for the determination of environmental radioactivity. Analytical methods. Part 3: Determination of 89Sr and 90Sr concentration in soils and sediments.

Korean Agency for Technology and Standards (KATS), Sample concentration

KS E ISO 13292:2008 Copper, lead, zinc and nickel concentrates－Experimental methods for checking the bias of sampling
KS E ISO 12743:2008 Copper, lead, zinc and nickel concentrates-Sampling procedures for determination of metal and moisture content
KS A 0082-2008(2018) Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS I ISO 16000-7:2009 Indoor air－Part 7：Sampling strategy for determination of airborne asbestos fibre concentrations
KS I ISO 16000-7:2020 Indoor air — Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
KS I ISO 10396-2009(2019) Stationary source emissions－Sampling for the automated determination of gas emission concentrations forpermanently-installed monitoring systems
KS I ISO 10396:2009 Stationary source emissions-Sampling for the automated determination of gas emission concentrations forpermanently-installed monitoring systems
KS M ISO 5990:2002 Photography－Processing chemicals－Specifications for potassium sulfite, 650g/L solution
KS B ISO 10791-7:2021 Test conditions for machining centres —Part 7: Accuracy of finished test pieces
KS B ISO 10791-7-2016(2021) Test conditions for machining centres — Part 7: Accuracy of a finished test piece
KS B ISO 10791-7:2016 Test conditions for machining centres — Part 7: Accuracy of a finished test piece
KS I ISO 8760:2008 Work-place air－Determination of mass concentration of carbon monoxide－Method using detector tubes for short-term sampling with direct indication
KS I ISO 8761:2008 Work-place air－Determination of mass concentration of nitrogen dioxide－Method using detector tubes for short-term sampling with direct indication
KS D ISO 14237-2003(2018)
KS P ISO 18153-2010(2016) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS P ISO 18153-2010(2021) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS I ISO 8760:2019 Work-place air ― Determination of mass concentration of carbon monoxide ― Method using detector tubes for short-term sampling with direct indication
KS I ISO 8761:2019 Work-place air ― Determination of mass concentration of nitrogen dioxide ― Method using detector tubes for short-term sampling with direct indication
KS P ISO 18153:2010 In vitro diagnostic medical devices-Measurement of quantities in biological samples-Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials

ES-UNE, Sample concentration

UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
UNE-EN 14662-3:2016 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
UNE-CEN/TS 13649:2014 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption (Endorsed by Asociación Española de Normalización in August...

Professional Standard - Grain, Sample concentration

LS/T 15121.1-2008 Special grade standard sample of early indica rice processing precision
LS/T 15122.1-2008 Standard sample of processing precision of late indica rice
LS/T 15123.1-2008 Standard sample of processing precision of late japonica rice
LS/T 15121.2-2008 Early indica rice processing precision standard sample standard first class
LS/T 15121.3-2008 Early indica rice processing precision standard sample standard second class
LS/T 15122.2-2008 Late Indica Rice Processing Precision Standard Sample Standard First Class
LS/T 15122.3-2008 Late Indica Rice Processing Precision Standard Sample Standard Second Class
LS/T 15123.2-2008 Late japonica rice processing precision standard sample standard first class
LS/T 15123.3-2008 Late japonica rice processing precision standard sample standard second class
LS/T 15111.3-2008 Southern wheat flour processing precision standard sample standard flour
LS/T 15112.3-2008 Northern wheat flour processing precision standard sample standard flour
LS/T 15111.1-2008 Special first-class standard sample of processing precision of southern wheat flour
LS/T 15111.2-2008 Southern wheat flour processing precision standard sample special second class
LS/T 15112.1-2008 Special first-class standard sample of northern wheat flour processing precision
LS/T 15112.2-2008 Second-class special standard sample of northern wheat flour processing precision

CEN - European Committee for Standardization, Sample concentration

PREN 17346-2019 Ambient Air Quality - Standard method for the determination of the concentration of ammonia by diffusive sampling
PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations

American National Standards Institute （ANSI), Sample concentration

ANSI/ASTM E2657:2011 Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
ANSI/ASTM D7872:2013 Test Method for Determining the concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels

API - American Petroleum Institute, Sample concentration

API PUBL 4619-1995 Study to Characterize Air Concentrations of Methyl Tertiary Butyl Ether (MTBE) at Service Stations in the Northeast

Professional Standard - Meteorology, Sample concentration

QX/T 67-2007 Determination of concentration of carbon dioxide in flask samples from background atmosphere.non-dispersive infrared absorption method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Sample concentration

ASHRAE SF-98-26-4-1998 Field Tests of Bio-Additives to Reduce Ammonia Emission from and Ammonia Concentration in Pig Houses

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sample concentration

GB/T 6060.4-1988 Roughness comparison specimens--Polished surfaces
GB/T 6060.3-1986 Roughness comparison specimens--Spark-erosion machining surfaces
GB/T 6060.5-1988 Roughness comparison specimens--Shot-blasted and grit-blasted surfaces
GB/T 6060.2-1985 Roughness comparison specimens--Ground, turned, bored,milled, shaped and planed
GB/T 6060.2-2006 Roughness comparison specimens - Ground, turned, bored, milled, shaped and planed

Professional Standard - Agriculture, Sample concentration

空气和废气监测分析方法 5.1.4-2003 Chapter 5 Pollution Source Monitoring Chapter 1 Sampling 4 Emission Concentration Calculation of Emissions

Japanese Industrial Standards Committee (JISC), Sample concentration

JIS Z 7152:2013 Determination of PM10/PM2.5 mass concentration in flue gas by use of virtual impactors

SE-SIS, Sample concentration

SIS SS-ISO 8760:1990 Work-place air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication
SIS SS-ISO 8761:1990 Work-place air — Determination of mass concentration of nitrogen dioxide — Method using detector tubes for short- term sampling with direct indication
SIS SS-ISO 2632-2:1989 Roughness comparison specimens — Part 2: Spark-eroded, shot-blasted and grit-blasted, and polished

KR-KS, Sample concentration

KS I ISO 16000-7-2020 Indoor air — Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
KS B ISO 10791-7-2021 Test conditions for machining centres —Part 7: Accuracy of finished test pieces
KS D ISO 14237-2003(2023)
KS I ISO 8761-2019 Work-place air ― Determination of mass concentration of nitrogen dioxide ― Method using detector tubes for short-term sampling with direct indication
KS I ISO 8760-2019 Work-place air ― Determination of mass concentration of carbon monoxide ― Method using detector tubes for short-term sampling with direct indication

BELST, Sample concentration

STB 17.13.05-49-2021 Еnvironmental pгоtесtion аnd nature use. Sampling and measurements, monitoring. Water quality. Determination of the mass concentration of nitrogen-containing substances using photometric tests

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Sample concentration

ASHRAE QC-06-060-2006 Poultry Slaughtering Plants: Concentrations of Microbial Aerosols in Poultry Slaughtering and Processing Plants RP-834

Lithuanian Standards Office , Sample concentration

LST EN ISO 16000-7:2007 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations (ISO 16000-7:2007)
LST EN 1948-1-2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
LST EN 16161-2012 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples
LST EN 14662-1-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography
LST EN 14662-4-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
LST EN 14412-2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
LST EN 1948-4-2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
LST EN 14662-3-2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
LST EN 14662-2-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography
LST EN 14662-5-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
LST EN 13528-1-2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements

未注明发布机构, Sample concentration

BS EN 1948-1:2006(2019) Stationary source emissions - Determination of the mass concentration of PCDDs / PCDFs and dioxin - like PCBs Part 1 : Sampling of PCDDs / PCDFs
ISO 25597:2013/Cor 1:2015 Stationary Source Emissions. Technical Corrigendum 1 for Test Method for Determination of PM and PM Mass in Stack Waste Using Cyclone Samples and Sample Concentration Dilutions

Shaanxi Provincial Standard of the People's Republic of China, Sample concentration

DB61/T 1294-2019 Determination of low-concentration sulfur dioxide in exhaust gas from stationary pollution sources Molecular sieve adsorption tube sampling-ion chromatography

ZA-SANS, Sample concentration

SANS 1092:2007 Breaking strength and extension at break of textile fabrics - Strip method using constant rate of load

US-CFR-file, Sample concentration

CFR 30-70.206-2014 Mineral Resources. Part70:Mandatory health standards—underground coal mines. Section70.206:Approved sampling devices; equivalent concentrations.
CFR 30-90.206-2014 Mineral Resources. Part90:Mandatory health standards—coal miners who have evidence of the development of pneumoconiosis. Section90.206:Approved sampling devices; equivalent concentrations.

Association of German Mechanical Engineers, Sample concentration

VDI 2452 Blatt 3-1987 Gaseous air pollution measurement; measurement of fluoride ion concentration; sorption method with prepared silver balls and heated membrane filter
VDI 2119-2013 Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration

TR-TSE, Sample concentration

TS 2578-1977 Roughness Comparison Specimens PART 1 : Turned, Ground, Bored, Milled, Shaped And Planed

(U.S.) Ford Automotive Standards, Sample concentration

FORD WSS-M99C127-A1-2009 ADDITIVE, CERIUM/IRON BASED FOR USE WITH DIESEL PARTICULATE FILTERS 6.5% CERIUM/IRON CONCENTRATION ***TO BE USED WITH FORD WSS-M99P1111-A***

NL-NEN, Sample concentration

NVN 2968-1992 Air quality. Workplace atmosphere. Determination of the concentration of ketones by active sorbent tube sampling, thermal desorption and gas chromatography
NVN 2964-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous chlorinated hydrocarbons by active sorbent tube sampling, liquid desorption and gas chromatography
NVN 2961-1992 Air quality. Workplace atmosphere. Determination of the concentration of aliphatic hydrocarbons by active sorbent tube sampling, thermal desorption and gas chromatography
NVN 2967-1992 Air quality. Workplace atmosphere. Determination of the concentration of ketones by active sorbent tube sampling, liquid desorption and gas chromatography
NVN 2969-1992 Air quality. Workplace atmosphere. Determination of the concentration of esters by active sorbent tube sampling, liquid desorption and gas chromatography
NVN 2960-1992 Air quality. Workplace atmosphere. Determination of the concentration of aliphatic hydrocarbons by active sorbent tube sampling, liquid desorption and gas chromatography
NVN 2958-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous aromatic hydrocarbons by active sorbent tube sampling, thermal desorption and gas chromatography
NVN 2956-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous aromatic hydrocarbons by active sorbent tube sampling, liquid desorption and gas chromatography
NEN 2931-1993 Air quality. Workplace atmosphere. Determination of the concentration of vinylchloride by active sorbent tube sampling, liquid desorption and gas chromatography
NVN 2965-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous chlorinated hydrocarbons by active sorbent tube sampling, thermal desorption and gas chromatography

SAE - SAE International, Sample concentration

SAE AS1015-1960 Fitting End (Attachable@ Female Flareless Machined Nipple@ Flexible Metal Hose- Straight@ 45 Degree Elbow and 90 Degree Elbow Styles)
SAE AS1015A-1999 Fitting End Attachable@ Female Flareless Machined Nipple@ Flexible Metal Hose - Straight@ 45 Degree Elbow and 90 Degree Elbow Styles

Professional Standard - Medicine, Sample concentration

YY/T 0638-2008 In vitro diagnostic medical devices.Measurement of quantities in biological samples.Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials