ZH
RU
ES

lab test stress

lab test stress, Total:499 items.

In the international standard classification, lab test stress involves: Wood, sawlogs and sawn timber, Quality, Water quality, Medical sciences and health care facilities in general, Equipment for the chemical industry, Earthworks. Excavations. Foundation construction. Underground works, Analytical chemistry, Test conditions and procedures in general, Metrology and measurement in general, Tyres, Corrosion of metals, Diagnostic, maintenance and test equipment, Road vehicle systems, Medical equipment, Elements of buildings, Installations in buildings, Standardization. General rules, Soil quality. Pedology, Laboratory medicine, Ground service and maintenance equipment, Air quality, Civil engineering in general, Pipeline components and pipelines, Farming and forestry, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Wastes, Environmental protection, Ceramics, Acoustics and acoustic measurements, Ventilators. Fans. Air-conditioners, Radiation protection, Internal combustion engines for road vehicles, Aircraft and space vehicles in general, Sports equipment and facilities, Fluid power systems, Environmental testing, Road engineering, Protection against crime, Coals, Products of non-ferrous metals, Testing of metals, Construction materials, Surface treatment and coating, Products of the chemical industry, Non-textile floor coverings, Fuels, Ergonomics, Fishing and fish breeding, Fertilizers, Paper products, Paper and board, General methods of tests and analysis for food products, Protection against fire, Products of the textile industry, Electricity. Magnetism. Electrical and magnetic measurements, Conducting materials, Edible oils and fats. Oilseeds, Extraction and processing of petroleum and natural gas, Company organization and management, Protection of and in buildings, Nuclear energy engineering, Mechanical testing, Vocabularies, Services, Equipment for petroleum and natural gas industries, Microbiology, Construction industry, Paints and varnishes, Petroleum products in general.

Indonesia Standards, lab test stress

SNI 03-3399-1994 Test method for tensile strength of wood in the laboratories
SNI 03-3400-1994 Test method for friction strenght of wood in laboratories.
SNI 03-3960-1995 Test method for modulus of bending elasticity of wood in laboratories
SNI 1744-2012 Metode uji CBR laboratorium
SNI 07-6217-2000 Testing methods of metal laboratory corrosion
SNI ISO/IEC 17025:2008 General requirements for the competence of testing and calibration laboratories
SNI 2848-2008
SNI 03-3959-1995 Test method for bending strength of wood in laboratories
SNI 7957-2014
SNI 8072-2016 Cara uji pengukuran potensi keruntuhan tanah di laboratorium

Taiwan Provincial Standard of the People's Republic of China, lab test stress

CNS 15009-2006 Proficiency testing by interlaboratory comparisons
CNS 13125-1992 Development and Operation of Laboratory Proficiency Testing
CNS 17025-2007 General requirements for the competence of testing and calibration laboratories
CNS 17025-2001 General requirements for the competence of testing and calibration laboratories
CNS 13123-1992 General Requirements for The Acceptance of Testing Laboratories

Korean Agency for Technology and Standards (KATS), lab test stress

KS I ISO TS 20612:2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS Q ISO/IEC 17025:2019 General requirements for the competence of testing and calibration laboratories
KS Q ISO 13528-2017(2022) Statistical methods for use in proficiency testing by interlaboratory comparisons
KS I ISO 20612:2009 Water quality－Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS B 6392-2013 Laboratory methods of testing air diffusers for aerodynamic performance
KS Q ISO 13528:2017 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS Q ISO/IEC 17025:2006 General requirements for the competence of testing and calibration laboratories
KS D 0235-2015(2020) Laboratory test method of sacrificial anodes for cathodic protection
KS P 2069-2020 Protocol for evaluation of detection capability for measurement procedures in in-vitro diagnostic medical laboratory

KR-KS, lab test stress

KS I ISO TS 20612-2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS Q ISO/IEC 17025-2019 General requirements for the competence of testing and calibration laboratories
KS Q ISO 13528-2017 Statistical methods for use in proficiency testing by interlaboratory comparisons

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, lab test stress

GB/T 27409-2010 Application of proficiency testing in the medical laboratory
GB/T 30098-2013 Laboratory magnetic driven autoclave
GB/T 15481-2000 General requirements for the competence of testing and calibration laboratories
GB/T 27025-2008 General requirements for the competence of testing and calibration laboratories
GB/T 31429-2015 Guide for quality management in a coal laboratory
GB/T 29170-2012 Petroleum and natural gas industries.Drilling fluids.laboratory testing
GB/T 21919-2022 Laboratory medicine—Requirements for the competence of calibration laboratories using reference measurement procedures
GB/T 24518-2009 Corrosion of metals and alloys-Test methods for stress corrosion cracking in outdoor envionments

RU-GOST R, lab test stress

GOST 12248-2010 Soils. Laboratory methods for determining the strength and strain characteristics
GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
GOST R ISO/IEC 17025-2000 General requirements for the competence of testing and calibration laboratories
GOST R ISO/IEC 17025-2006 General requirements for the competence of testing and calibration laboratories
GOST R 8.692-2009 State system for ensuring the uniformity of measurements. Requirements for the competence of providers of proficiency testing for test laboratories by interlaboratory comparisons
GOST R 51000.3-1996 General criteria for testing laboratories
GOST 30416-2012 Soils. Laboratory testing. General requirements
GOST 34259-2017 Soils. Method of laboratory determination of adhesion (stickiness)
GOST R 59596-2021 Soils. Method of laboratory determination of normal forces of frost heaving
GOST R 51000.4-2008 General requirements for accreditation of testing laboratories
GOST R 51000.4-2011 General requirements for accreditation of testing laboratories
GOST R 51000.4-1996 State system for standardization of the Russian Federation. Accreditation system in the Russian Federation. General requirements for accreditation of testing laboratories
GOST 31299-2005 Noise of machines. Determination of sound insulation performances of cabins. Laboratory and in situ test
GOST R 56726-2015 Soils. Laboratory method for determine the specific tangential forces of frost heaving
GOST 17245-1979 Soils. Method of laboratory determination of temporary resistance for single-exial compression
GOST R ISO 5089-1999 Textiles. Preparation of laboratory test samples and test specimens for chemical testing

Professional Standard - Machinery, lab test stress

JB/T 7439.2-1994 Terminology relating to laboratory instruments - Dynamic test instrument
JB/T 7439.7-1994 Terminology relating to laboratory instruments - Strain measuring instrument
JB/T 8537-1997 Laboratory test method of dust specific electric resistance
JB/T 8537-2010 Testing method for dust resistivity in lab
JB/T 8537-2023 Testing method for dust resistivity in laboratory

British Standards Institution (BSI), lab test stress

BS 6460-1:1983 Accreditation of testing laboratories - Specification of the general requirements for the technical competence of testing laboratories
BS EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
BS EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
BS EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
BS EN 13286-2:2010 Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
BS EN 13286-2:2010(2012) Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
BS EN 13286-2:2004 Unbound and hydraulically bound mixtures - Test methods for the determination of the laboratory reference density and water content - Proctor compaction
BS ISO 8858-1:2019 Hard coal. Froth flotation testing - Laboratory procedure
BS EN ISO 17892-10:2018 Geotechnical investigation and testing. Laboratory testing of soil - Direct shear tests
BS EN 17542-2:2022 Earthworks. Geotechnical laboratory tests - Fragmentability test standard
BS EN 17542-1:2022 Earthworks. Geotechnical laboratory tests - Degradability test standard
BS EN ISO 11378-2:2001+A1:2017 Textile floor coverings. Laboratory soiling tests - Drum test
BS EN ISO 17892-11:2019 Geotechnical investigation and testing. Laboratory testing of soil - Permeability tests
BS ISO 27327-1:2010 Fans. Air curtain units. Laboratory methods of testing for aerodynamic performance rating
BS ISO 27327-1:2009 Fans - Air curtain units - Laboratory methods of testing for aerodynamic performance rating
BS EN ISO 17892-1:2014 Geotechnical investigation and testing. Laboratory testing of soil. Determination of water content
BS EN ISO 17892-8:2018 Geotechnical investigation and testing. Laboratory testing of soil - Unconsolidated undrained triaxial test
PD ISO/TR 19867-3:2018 Clean cookstoves and clean cooking solutions. Harmonized laboratory test protocols. Voluntary performance targets for cookstoves based on laboratory testing
BS EN ISO 17892-4:2016 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle size distribution
BS EN ISO 17892-1:2014+A1:2022 Geotechnical investigation and testing. Laboratory testing of soil - Determination of water content
BS EN ISO 17892-3:2015 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle density
BS EN ISO 17892-2:2014 Geotechnical investigation and testing. Laboratory testing of soil. Determination of bulk density
PD ISO/IEC TS 23532-2:2021 Information security, cybersecurity and privacy protection. Requirements for the competence of IT security testing and evaluation laboratories. Testing for ISO/IEC 19790

未注明发布机构, lab test stress

GJB 15481-2001 General requirements for competence of testing and calibration laboratories
SAE J2334-201604 Laboratory Cyclic Corrosion Test
DIN EN ISO 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
BS EN ISO/IEC 17025:2017(2018) General requirements for the competence of testing and calibration laboratories
BS EN ISO 3696:1995(1999) Water for analytical laboratory use — Specification and test methods
BS EN ISO 10416:2009(2010) Petroleum and natural gas industries — Drilling fluids — Laboratory testing

SE-SIS, lab test stress

SIS SS 02 01 80-1987 General requirements for the technical competence of testing laboratories
SIS SS 02 01 81-1985 General requirements for the acceptance of testing laboratories
SIS SS 16 18 12-1984 Plastics — Methods of exposure to laboratory light sources
SIS SS-EN 45 002-1989 General criteria for the assessment of testing laboratories
SIS SS-EN 45 001-1989 General criteria for the operation of testing laboratories
SIS SS 2095-1986 Heating equipment - Heat pumps - Laboratory testing of performance

International Organization for Standardization (ISO), lab test stress

ISO/IEC GUIDE 25:1990 General requirements for the competence of calibration and testing laboratories
ISO 17892-11:2019 Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Permeability tests
ISO 17892-7:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined compression test
ISO 10191:2021 Passenger car tyres — Verifying tyre capabilities — Laboratory test methods
ISO 15195:2018 Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement procedures
ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
ISO/IEC GUIDE 38:1983 General requirements for the acceptance of testing laboratories
ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
ISO/TS 20612:2007 Water quality - Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
ISO/IEC 17025:1999 General requirements for the competence of testing and calibration laboratories
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 7263:2008 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
ISO/R 783:1968 Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
ISO/IEC 17025:2005/Cor 1:2006 General requirements for the competence of testing and calibration laboratories; Technical Corrigendum 1
ISO 17892-10:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests

CEN - European Committee for Standardization, lab test stress

EN ISO 17892-11:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests
EN ISO 17892-7:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test
EN 13286-2:2004 Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction
EN ISO 7263:2008 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
EN ISO 17892-10:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests

Military Standard of the People's Republic of China-General Armament Department, lab test stress

GJB 2725-1996 General requirements for calibration laboratories and testing laboratories
GJB 2725A-2001 General requirements for testing laboratories and calibration laboratories
GJB 165.3-1986 Fuze laboratory test Fuze delay tube ignition capability test
GJB 165.3A-2019 Fuze Laboratory Test Part 3: Fuze Delay Barrel Ignition Capability Test
GJB 165.3A-2004 Fuze Laboratory Test Part 3: Fuze Delay Barrel Ignition Capability Test
GJB 165.6-1986 Fuze laboratory test Fuze static clock mechanism time measurement test
GJB 2926-1997 Electromagnetic compatibility testing laboratory accreditation requirements
GJB 165.6A-2019 Laboratory test of fuze Part 6: Static timing test of fuze clock mechanism

National Association of Corrosion Engineers (NACE), lab test stress

NACE TM0177-1996 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments Errata Sheet
NACE TM0177-2016 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments (Item No: 21212)
NACE TM0177-2005 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments (Item No:21212)
NACE TM0169-2000 Laboratory Corrosion Testing of Metals Item No:21200

American Society for Testing and Materials (ASTM), lab test stress

ASTM ANS/ISO 17025-99 General requirements for the competence of testing and calibration laboratories
ASTM ANS/ISO 17025-05 General Requirements for the Competence of Testing and Calibration Laboratories
ASTM ANS/ISO17025-05 General Requirements for the Competence of Testing and Calibration Laboratories
ASTM ANS/ISO17025-99 General requirements for the competence of testing and calibration laboratories
ASTM E2935-17 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E2935-16 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM F1903-98(2003) Standard Practice for Testing for Biological Responses to Particles In Vitro
ASTM F1903-98 Standard Practice for Testing for Biological Responses to Particles In Vitro
ASTM D7401-08 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
ASTM D7300-06 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
ASTM E2489-16 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM E2935-13 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D7300-18 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
ASTM D1883-05 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-99 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-07e1 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM C1576-05 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
ASTM D5607-02 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
ASTM D5607-08 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
ASTM F2634-10 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM D7300-11 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
ASTM E671-98 Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
ASTM E671-98(2004) Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
ASTM E596-96(2002) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E596-96(2002)e1 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E596-96(2009) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM F2634-07 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM D1557-00 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³(2,700 kN-m/m³))
ASTM G97-97(2013) Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM G97-18(2022) Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM C943-17 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM C943-10 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM D1883-14 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1883-07e2 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D5179-16(2021) Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D698-00ae1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft³ (600 kN-m/m³))
ASTM D698-00a Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft³ (600 kN-m/m³))
ASTM C1077-07a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-07 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-11 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C1077-10d Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-11a Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM D1557-02 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³(2,700 kN-m/m³))
ASTM D1557-02e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³(2,700 kN-m/m³))
ASTM D1557-09 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³))
ASTM D1557-12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³))
ASTM C1222-06 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1021-08(2014) Standard Practice for Laboratories Engaged in Testing of Building Sealants
ASTM D4427-92(2007) Standard Classification of Peat Samples by Laboratory Testing
ASTM D4427-92(1997) Standard Classification of Peat Samples by Laboratory Testing
ASTM D4427-13(2017) Standard Classification of Peat Samples by Laboratory Testing
ASTM D4427-18 Standard Classification of Peat Samples by Laboratory Testing
ASTM D5607-95 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
ASTM C1077-03a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-03 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-02 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-00 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM E2653-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E596-96(2016) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E691-21 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-22 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM C1576-05(2017) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
ASTM D6275-98(2003) Standard Practice for Laboratory Testing of Bridge Decks (Withdrawn 2004)
ASTM D698-12(2021) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft³ (600 kN-m/m³))
ASTM D698-12e2 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft³ (600 kN-m/m³))
ASTM F551/F551M-09a Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires
ASTM E671-98(2022) Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
ASTM E671-98(2016) Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
ASTM C1021-08(2023) Standard Practice for Laboratories Engaged in Testing of Building Sealants
ASTM E2215-10 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
ASTM D4648/D4648M-10 Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
ASTM D4648/D4648M-13 Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
ASTM F551-89(2000) Standard Practice for Using a 67.23-in. (1.707-m) Diameter Laboratory Test Roadwheel in Testing Tires
ASTM D4633-86 Test Method For Stress Wave Energy Measurment For Dynamic Penetrometer Testing Systems
ASTM E596-96 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM D7847-17 Standard Guide for Interlaboratory Studies for Microbiological Test Methods
ASTM C1077-11c Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM E2653-14 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E596-22 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM D969-85(2003) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D698-07e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft³ (600 kN-m/m³))
ASTM D698-07 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft³ (600 kN-m/m³))
ASTM D1557-07 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³))
ASTM D698-12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12thinsp;400 ft-lbf/ft³thinsp;(600 kN-m/m³))
ASTM D698-12e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort 40;12 400 ft-lbf/ft³ 40;600 kN-m/m³41;41;

International Electrotechnical Commission (IEC), lab test stress

ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories

German Institute for Standardization, lab test stress

DIN EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005); German and English version EN ISO/IEC 17025:2005
DIN EN ISO/IEC 17025:2018-03 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017); German and English version EN ISO/IEC 17025:2017
DIN 50905-4:2018-03 Corrosion of metals - Corrosion testing - Part 4: Performance of chemical corrosion experiments without mechanical stresses in liquids in the laboratory
DIN 50905-4:1987 Corrosion of metals; corrosion testing; corrosion testing in liquids under laboratory conditions without mechanical stress
DIN EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
DIN 13277:2022-05 Refrigerators and freezers for laboratory and medical applications - Terminology, requirements, testing / Note: DIN 13221 (2016-08), DIN 58345 (2007-09), DIN 58371 (2010-09) and DIN 58375 (2004-11) remain valid alongside this standard until 2022-10-31.
DIN 13277:2022 Refrigerators and freezers for laboratory and medical applications - Terminology, requirements, testing
DIN EN ISO 15195:2019-07 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018); German version EN ISO 15195:2019
DIN EN 12155:2000-10 Curtain walling - Watertightness - Laboratory test under static pressure; German version EN 12155:2000
DIN 45688:2014-07 Specific requirements for the competence of testing laboratories for noise and vibration in the field of immission control
DIN EN ISO 7263:2009 Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2008); English version of DIN EN ISO 7263:2009-05
DIN 13221:2016-08 Laboratory refrigerators and freezers - Terminology, requirements, testing
DIN EN ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017); German and English version EN ISO/IEC 17025:2017
DIN 30665-1:2021-06 Gas-appliances - Gas burners for laboratory use (laboratory burners) - Part 1: Safety requirements and tests / Note: This standard is part of the DVGW body of rules.*DIN 30665-1 (1982-03) remains valid alongside this standard until 2021-11-30.
DIN 18125-1:2010 Soil, investigation and testing - Determination of density of soil - Part 1: Laboratory tests
DIN EN ISO 5089:2016-09 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977); German version EN ISO 5089:2016
DIN 18125-1:1997 Soil, investigation and testing - Determination of density of soil - Part 1: Laboratory tests
DIN 58936-2:2001 Quality management in laboratory medicine - Part 2: Terminology for quality and application of test procedure
DIN 25412-2:2015-12 Laboratory equipment - Glove boxes - Part 2: Leakage test
DIN EN ISO 10416:2010-04 Petroleum and natural gas industries - Drilling fluids - Laboratory testing (ISO 10416:2008); English version EN ISO 10416:2009
DIN 12927:1995-10 Laboratory furniture - Ductless filtering fume enclosures - Requirements, test
DIN 18130-1:1998 Soil - investigation and testing; Determination of the coefficient of water permeability - Part 1: Laboratory tests
DIN EN ISO 17892-10:2019-04 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018); German version EN ISO 17892-10:2018
DIN 12600:1990 Laboratory volumetric instruments; conformity testing and certification
DIN 51412-1:2005 Testing of petroleum products - Determination of the electrical conductivity - Part 1: Laboratory method

US-FCR, lab test stress

FCR FED H-08-1 SEC 01410-2004 TESTING LABORATORY SERVICES
FCR VA 01 45 29-2012 TESTING LABORATORY SERVICES
FCR COE ER 1110-1-8100-1997 LABORATORY INVESTIGATIONS AND TESTING
FCR COE ER 1140-1-210-1979 LABORATORY INVESTIGATIONS AND MATERIALS TESTING
FCR COE ER 1110-1-1401-1989 INTERLABORATORY TESTING PROGRAM FOR CHEMICAL ANALYSES
FCR COE ER 1110-1-261-1999 QUALITY ASSURANCE OF LABORATORY TESTING PROCEDURES
FCR COE EM 1110-2-1909-1970 CALIBRATION OF LABORATORY SOILS TESTING EQUIPMENT
FCR COE EM 1110-2-1909 CHANGE 1-1986 CALIBRATION OF LABORATORY SOILS TESTING EQUIPMENT
FCR FED SPEC PUB 736-1987 PROCEEDINGS OF THE CONFERENCE ON ACCREDITATION OF CONSTRUCTION MATERIALS TESTING LABORATORIES
FCR 21 CFR PART 660-2015 ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS
FCR 21 CFR PART 660-2014 ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS
FCR 21 CFR PART 660-2013 ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS
FCR COE EM 1110-2-1906-1970 LABORATORY SOILS TESTING, REPRINT INCORPORATES CHANGES 1-2
FCR COE EP 1-1-10-1985 CORPS OF ENGINEERS LABORATORY, INVESTIGATIONAL, RESEARCH AND TESTING FACILITIES
FCR COE ER 70-1-8-1980 WORK FOR OTHERS LABORATORY RESEARCH AND DEVELOPMENT AND TESTS

BELST, lab test stress

STB 941.3-93 System of accreditation of verification ant testing laboratory of Belarus. General requirements for estimation of technical competence verification and testing laboratory
STB 2542-2019 Special requirements for the application of STB ISO/IEC 17025-2007 for the evaluation of competence of laboratories performing verifications of measuring instruments
STB 941.5-96 System of accreditation and testing laboratories of Belarus. Experts on attestation of calibration and testing laboratories

Professional Standard - Commodity Inspection, lab test stress

SN/T 3092-2012 Code for validation of the ability of lab replying to public safety affairs
SN/T 3782-2014 Rules for laboratory proficiency testing specification of manufacturing/marketing enterprises on import and export textiles
SN/T 2990-2011 Quality control and quality evaluation. Index evaluation method of process and ability in testing laboratory

HU-MSZT, lab test stress

Professional Standard - Agriculture, lab test stress

CNAS-CL01-G001-2018 Application Requirements of CNAS-CL01
CNAS-CL01-A002-2018 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Chemical Testing
CNAS-CL01-A006-2021 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Nondestructive Testing
CNAS-CL01-A002-2020 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Chemical Testing
CNAS-CL01-A003-2019 Instructions for the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Electrical Testing
CNAS-CL01-A025-2022 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Calibration
CNAS-RL01-2019 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Microbiological Testing
CNAS-CL01-A001-2018 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Microbiological Testing
CNAS-CL01-A001-2022 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Microbiological Testing
CNAS-GL043-2020 Guidelines for the Evaluation of Uncertainty in Measurement of ELISA Tests in Veterinary Testing Laboratories

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, lab test stress

GB/T 4157-2017 Laboratory testing of metals for resistance to sulfide stress cracking and stress corrosion cracking in H2S environment

Society of Automotive Engineers (SAE), lab test stress

SAE J1106-2012 Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires
SAE J2334-2003 Laboratory Cyclic Corrosion Test
SAE J1107-2012 Laboratory Testing Machines and Procedures for Measuring the steady state Force and Moment Properties of Passenger Car Tires
SAE J984-1967 BODY FORMS FOR LABORATORY IMPACT TESTING
SAE J994-2003 Alarm Backup Electric Laboratory Performance Testing
SAE J1106-1975 Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires, Recommended Practice January 1975
SAE J1597-2008 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
SAE J1597-1994 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
SAE J1597-1999 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
SAE J994-2023 Alarm - Backup - Electric Laboratory Performance Testing
SAE AIR5797-2008 Aircraft Tire Wear Profile Development and Execution for Laboratory Testing
SAE J1107-1975 Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires, Information Report January 1975
SAE J944A-1968 STEERING CONTROL SYSTEM — PASSENGER CAR — LABORATORY TEST PROCEDURE
SAE J1633-1995 Laboratory Speed Test Procedure for Light Truck Tires
SAE J944-2022 Steering Control System - Passenger Car - Laboratory Test Procedure

Association Francaise de Normalisation, lab test stress

NF S92-062*NF EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures
NF X50-061:2000 General requirements for the competence of testing and calibration laboratories.
NF P94-072:1995 Sols : reconnaissance et essais - Essai scissométrique en laboratoire
NF X50-061*NF EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories.
NF X50-061*NF EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
NF EN ISO/IEC 17025:2017 Exigences générales concernant la compétence des laboratoires d'étalonnages et d'essais
NF EN 12155:2000 Façades rideaux - Détermination de l'étanchéité à l'eau - Essai de laboratoire sous pression statique
NF E49-501:1976 Pneumatic fluid power systems. Cylinders. Measurement of friction forces. Laboratory method.
FD CEN ISO/ASTM TR 52917:2022 Fabrication additive - Essais interlaboratoires - Lignes directrices générales
NF Q03-044:2009 Corrugating medium - Determination of the flat crush resistance after laboratory fluting.
NF Q03-044:2011 Corrugating medium - Determination of the flat crush resistance after laboratory flutin.
NF A06-000:1979 Statistical interpretation of interlaboratory tests. Simplified method applicable to maximum 20 laboratories and maximum 10 results per laboratory.
NF EN 17542-2:2022 Terrassements - Essais géotechniques en laboratoire - Partie 2 : Essai de fragmentabilité
NF EN ISO 664:2008 Graines oléagineuses - Réduction de l'échantillon pour laboratoire en échantillon pour essai
NF P98-846-2:2005 Unbound and hydraulically bound mixtures - Part 2 : test methods for the determination of the laboratory reference density and water content - Proctor compaction.
NF P98-846-2*NF EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2 : test methods for laboratory reference density and water content - Proctor compaction.
NF R12-755*NF ISO 10191:2021 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
NF G06-001*NF EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
NF EN ISO 10416:2010 Industries du pétrole et du gaz naturel - Fluides de forage - Essais en laboratoire
NF X15-206:2022 Sorbonnes de laboratoire - Seuil pour les essais de confinement et de vitesse
NF EN 12697-35:2017 Mélanges bitumineux - Essais - Partie 35 : malaxage de laboratoire
NF S31-050:1979 Acoustics. Measurement of the acoustic insulation of building and building components. Specifications relating to laboratories.

国家能源局, lab test stress

NB/T 10523.1-2021 Test methods for mechanical properties of drum shearers Part 1: Laboratory tests

European Committee for Standardization (CEN), lab test stress

CEN PREN 14727-2003 Laboratory furniture - Storage units for laboratories - Requirements and test methods
EN ISO/IEC 17025:2000 General Requirements for the Competence of Testing and Calibration Laboratories ISO/IEC 17025: 1999
EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
EN ISO 10140-3:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2021)
EN ISO 10140-3:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010)

Danish Standards Foundation, lab test stress

DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
DS/EN ISO/IEC 17025/AC:2006 General requirements for the competence of testing and calibration laboratories
DS/EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
DS/EN 20-2:1994 Wood preservatives-Determination of the protective effectiveness against Lyctus brunneus(Stephens)-Part 2:Application by impregnation (laboratory method)
DS/EN ISO 3696:1996 Water for analytical laboratory use - Specification and test methods
DS/EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
DS/EN 20-1:1994 Wood preservatives-Determination of the protective effectiveness against Lyctus brunneus(Stephens)-Part 1;Application by surface treatment(laboratory method)
DS/EN ISO 10416:2010 Petroleum and natural gas industries - Drilling fluids - Laboratory testing

Lithuanian Standards Office , lab test stress

LST EN 14727-2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
LST EN ISO/IEC 17025:2005/AC:2006 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005/Cor.1:2006)
LST EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
LST ISO 5089:1996 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
LST EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011)

AENOR, lab test stress

UNE-EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
UNE 103502:1995 TEST LABORATORY METHOD FOR DETERMINING IN A SOIL THE C.B.R. INDEX.
UNE-EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure.
UNE-EN ISO/IEC 17025:2005 Conformity assessment. General requirements for the competence of testing and calibration laboratories
UNE-EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017)
UNE-EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011)

SAE - SAE International, lab test stress

SAE J2334-2002 Cosmetic Corrosion Lab Test
SAE J2334-2016 Laboratory Cyclic Corrosion Test
SAE J2334-1998 Cosmetic Corrosion Lab Test
SAE J984-1992 BODYFORMS FOR USE IN MOTOR VEHICLE PASSANGER COMPARTMENT IMPACT DEVELOPMENT
SAE J1597-1988 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure Cycle Durability
SAE J1597-2016 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
SAE J1597-2021 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure Cycle Durability
SAE J2883-2020 Laboratory Measurement of Random Incidence Sound Absorption Tests Using a Small Reverberation Room
SAE J2883-2015 Laboratory Measurement of Random Incidence Sound Absorption Tests Using a Small Reverberation Room
SAE J944-1968 STEERING CONTROL SYSTEM - PASSENGER CAR - LABORATORY TEST PROCEDURE
SAE J944-1965 STEERING WHEEL ASSEMBLY - LABORATORY TEST PROCEDURE
SAE J944-1980 STEERING WHEEL ASSEMBLY - LABORATORY TEST PROCEDURE

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., lab test stress

ASHRAE CH-99-9-1999 Symposium on Laboratory Verification and Testing
ASHRAE 51 INT 2-2000 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51 ERTA-2006 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51 INT 1-2000 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51 ADD A-2001 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 110-2016 Methods of Testing Performance of Laboratory Fume Hoods
ASHRAE 110 INT 1-2011 Method of Testing Performance of Laboratory Fume Hoods
ASHRAE 51-2016 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ASHRAE 130-2016 Laboratory Methods of Testing Air Terminal Units
ASHRAE 4001-1996 Development of Ventilation Rates and Design Information for Laboratory Animal Facilities: Part 2 - Laboratory Tests (RP-730)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), lab test stress

ASHRAE IC 51-1999-02-1999 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 110 ERTA-2016 Methods of Testing Performance of Laboratory Fume Hoods
ASHRAE 110-1995 Method of Testing Performance of Laboratory Fume Hoods
ASHRAE 51-2008 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51-2007 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 207-2021 Laboratory Method of Test of Fault Detection and Diagnosis for Air Economizers

Heilongjiang Provincial Standard of the People's Republic of China, lab test stress

DB23/T 3598-2023 Hemp Inspection and Testing Laboratory Personnel Competency Requirements

FI-SFS, lab test stress

SFS 5207-1986
SFS 5120-1985
SFS 5485-1988 In case of interpretation disputes the English textapplies

ES-AENOR, lab test stress

UNE 66-802-1989
UNE 66-501-1991
UNE 66-502-1991 General criteria for the assessment of testing laboratories
UNE 66-801-1989
UNE 66-804-1989

Compressed Gas Association (U.S.), lab test stress

CGA M-13-2008 Certifying third-party testing laboratories
CGA M-13-2014 Certifying third-party testing laboratories

RO-ASRO, lab test stress

STAS 1913/6-1976 Foundation ground LABORATORY PERMEABILITY TEST
STAS SR ISO 718:1995 Laboratory glassware - Thermal shock and thermal shock endurance - Test methods
STAS SR EN 45001-1993 Generai criteria for the operation of testing iaboratories
STAS 11399-1980 Tests of metals TORSIONAL STRESS TESTING

NZ-SNZ, lab test stress

NZS ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (ISO/IEC 17025:2005)

Group Standards of the People's Republic of China, lab test stress

T/CSCP 0035.13-2017 Laboratory Corrosion Testing of Low Alloy Structural Steels Part 13: Stress Corrosion Test Methods for Low Alloy Structural Steels
T/ZCHSP 003-2023 Operation and management specifications for emergency nucleic acid testing laboratories
T/BSAS 001-2020 Code for Emergency Management of Agricultural Product Quality Inspection and Testing Laboratory
T/LNIQA 006-2022 Competence evaluation?specifications for food safety rapid testing laboratories
T/CAS 651-2022 Guidelines for hiring, competency development and assessment supervision of Inspection and testinglaboratory personnel
T/LZZLXH 056-2021 Specification for management of media and reagents for laboratory testing
T/SDAS 247-2021 Management specifiaction of reagent consumables of ecological environmental monitoring laboratory

TH-TISI, lab test stress

TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes
TIS 5043.2-1997 Proficiency testing by interlaboratory comparisons.part 2: selection and use of proficiency testing schemes by laboratory accreditation bodies
TIS 17025-2005 General requirements for the competence of testing and calibration laboratories
TIS 1300-1994 General requirements for teh competence of calibration and testing laboratories

CZ-CSN, lab test stress

CSN 30 3642-1983 Hydraulic telescopic shock absorbes for road vehicles Methods of laboratory testing
CSN ISO 7140:1993 Cross-country skis. Determination of dynamic performance. Laboratory measurement method
CSN 63 1502-1988 Tyre testing. Instruction for the preparation of tyres for laboratory tests
CSN ISO 5089:1994 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
CSN 72 1026-1992 Laboratory determination of the Shear Strength of soils by vane test
CSN 30 3109-1974 Laboratory testing of fric-tlon materials for clutch facing

PL-PKN, lab test stress

PN B04481-1988 Building soils Laboratory tests
PN EN 45002-1993 General criteria for the assessment of testing laboratories
PN G04502-1990 Hard coal Samplins and prepafation for laboratory testing
PN H11079-1973 Foundry moulding materials Laboratory tests Sempling
PN B04482-1989 Apparatus lor laboratory shear strcngith tcsting of soils willi de lined shear surlaee General technical requirenents
PN B13018-1992 Laboratory glassware. Volumetric glassware. Methods for use and testing of capacity
PN P04600-1991 Textiles. Determination of the precision of test methods by inter-laboratory tests
PN B13043-1986 Laboratory glassware Test tubes Specification and methods of test
PN BN 7469-01-1968 Printing inks System of laboratory testing methods
PN T06515-06-1989 pH-metry Laboratory pH-meters General re?uirements and tests
PN P22101-1992 Leather Preparation of laboratory samples for tests

AT-ON, lab test stress

ONORM EN 45002-1990 General criteria for the assesment of testing laboratories

NO-SN, lab test stress

NS 8011-1982 Geotechnical testing - Laboratory methods - Density
NS 8013-1982 Geotechnical testing - Laboratory methods - Water content
NS 8016-1988 Geotechnical testing - Laboratory methods - Determination of undrained shear strength by unconfined pressure testing
NS 8003-1982 Geotechnical testing - Laboratory methods - Plastic limit

American Petroleum Institute (API), lab test stress

API RP 13I-2020 Laboratory Testing of Drilling Fluids (NINTH EDITION)

API - American Petroleum Institute, lab test stress

API TR 939-D-2007 Stress Corrosion Cracking of Carbon Steel in Fuel-Grade Ethanol: Review@ Experience Survey@ Field Monitoring@ and Laboratory Testing (Second Edition)
API STD 1512-1995 Petroleum Test Laboratory Accreditation Program (First Edition)
API RP 13I-2004 Recommended Practice for Laboratory Testing of Drilling Fluids (Seventh Edition)
API RP 13I-2009 Recommended Practice for Laboratory Testing of Drilling Fluids (EIGHTH EDITION)
API RP 13I-2000 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (Sixth Edition)
API RP 13I-1990 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (FOURTH EDITION)
API RP 13I SUPP 1-1992 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (Fourth Edition)

Professional Standard - Civil Aviation, lab test stress

MH/T 6096-2013 Proficiency testing procedures for commercial aviation oil testing laboratory

Association of German Mechanical Engineers, lab test stress

VDI 4221 Blatt 2-2017 Quality assurance - Requirements on interlaboratory tests in immission control - Design, performance and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions
VDI 4221 Blatt 1-2015 Quality assurance - Requirements on interlaboratory tests in immission control - Requirements on providers of interlaboratory tests

American National Standards Institute （ANSI), lab test stress

ANSI/ASTM E2935:2013 Practice for Conducting Equivalence Testing in Laboratory Applications
ANSI/ASTM/ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/ASTM F2634:2010 TEST METHOD FOR LABORATORY TESTING OF POLYETHYLENE (PE) BUTT FUSION JOINTS USING TENSILE-IMPACT METHOD
ANSI/AMCA 220-2021 Laboratory Methods of Testing Air Curtain Units for Aerodynamic Performance Rating
ANSI/ASHRAE 51-2001 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ANSI/AMCA 220-2005 Laboratory Methods of Testing Air Curtain Units for Aerodynamic Performance Rating
ANSI/AMCA 240-2015 Laboratory Methods of Testing Positive Pressure Ventilators for Aerodynamic Performance Rating
ANSI/AMCA 500-L-2015 Laboratory Methods of Testing Louvers for Rating
ANSI/ASHRAE 51-2016 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ANSI/AMCA 210/ASHRAE51-2007 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ANSI/ASTM E2489:2016 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ANSI/ASHRAE 130-2016 Laboratory Methods of Testing Air Terminal Units
ANSI/AMCA 240-1996 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/AMCA 240-2006 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/ASTM E2653a:2009 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer than Six Participating Laboratories
ANSI/ASA S3.1-1999 Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms
ANSI/NCSL Z540-1-1994 Calibration -- Calibration Laboratories and Measuring and Test Equipment -- General Requirements
ANSI/ASTM E691:2013 PRACTICE FOR CONDUCTING AN INTERLABORATORY STUDY TO DETERMINE THE PRECISION OF A TEST METHOD
ANSI/AMCA 260-2013 Laboratory Methods of Testing Induced Flow Fans for Rating
ANSI/ASTM D6617:2013 Practice For Laboratory Bias Detection Using Single Test Result from Standard Material

American Society of Quality Control （ASQC), lab test stress

ASQ 17025-1999 General requirements for the competence of testing and calibration laboratories T17025E
ASQ 17025-2005 General requirements for the competence of testing and calibration laboratories T804

Standard Association of Australia （SAA）, lab test stress

AS ISO/IEC 17025:2005/Amdt 1:2006
AS ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories
AS ISO 10416:2022 Petroleum and natural industries — Drilling fluids — Laboratory testing
AS ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories

GOSTR, lab test stress

GOST ISO/IEC 17025-2019 General requirements for the competence of testing and calibration laboratories
GOST 34276-2017 Soils. Methods of laboratory determination of the specific resistance to penetration

国家市场监督管理总局、中国国家标准化管理委员会, lab test stress

GB/T 27025-2019 General requirements for the competence of testing and calibration laboratories
GB/T 38841-2020 Mechanical properties measurement—Room temperature tensile test of reacted Nb3Sn composite superconductors

IX-FAO, lab test stress

CAC/GL 27-1997,Amended 2006(Ch) Guidelines for Capacity Assessment of Testing Laboratories Engaged in Food Import and Export Control
CAC/GL 27-1997(En) Guidelines for Capacity Assessment of Testing Laboratories Engaged in Food Import and Export Control
CAC/GL 27-1997 Guidelines for the Assessment of the Competence of Testing Laboratories Involved in the Import and Export Control of Foods

IT-UNI, lab test stress

UNI 6687-1973

GM Global, lab test stress

GMW 14872-2013 Cyclic Corrosion Laboratory Test Issue 3; English

Professional Standard - Environmental Protection, lab test stress

HJ/T 155-2004 The guidelines of chemical testing good laboratory practices

国家质量监督检验检疫总局, lab test stress

SN/T 4754-2017 Technical requirements for chemical testing proficiency verification in entry-exit laboratories

Professional Standard - Nuclear Industry, lab test stress

EJ/T 20037-2014 Laboratory competency requirements for radioactivity determination of biological samples

ES-UNE, lab test stress

UNE-EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
UNE-EN ISO 10416:2009 Petroleum and natural gas industries - Drilling fluids - Laboratory testing (ISO 10416:2008) (Endorsed by AENOR in January of 2010.)
UNE-EN ISO 17892-6:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test (ISO 17892-6:2017)
UNE-EN ISO 17892-10:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018)

YU-JUS, lab test stress

JUS G.S2.006-1984 Leather. Laboratory samples and preparation for testing
JUS U.B1.042-1997 Testing ofsoil - Determination of the California bearing rado in laboratory
JUS B.E8.131-1991 Insulating glass units. Determination of dew point temperature, Laboratory test

Professional Standard - Coal, lab test stress

MT/T 895-2000 Guidelines for quality control in coal laboratory

Professional Standard - Public Safety Standards, lab test stress

GA/T 1780-2021 Specifications for the construction of multi-channel psychological testing laboratories

VN-TCVN, lab test stress

TCVN 7155-2002 Laboratory glassware.Thermal shock and thermal shock endurance.Test methods

Professional Standard - Electricity, lab test stress

DL/T 520-2007 Technical guidance for coal analytical laboratory in power plant

国家市场监督管理总局, lab test stress

RB/T 055-2020 Competence Guidelines for Conformity Assessment Service Characteristics Assessment Laboratories

Xinjiang Provincial Standard of the People's Republic of China, lab test stress

DB6523/T 351-2023 Emergency management regulations for agricultural product quality and safety inspection and testing laboratories

BE-NBN, lab test stress

NBN-EN 302-2-1994
NBN B 16-501-1977
NBN-ISO 7845:1992 Horizontal joints between load-bearing walls and concrete floors - Laboratory mechanical tests -Effect of vertical loading and of moments transmitted by the floors

Professional Standard - Medicine, lab test stress

YY/T 1915-2023 General rules for laboratory testing of immunochromatographic kits

Professional Standard - Geology, lab test stress

DZ/T 0130.16-2006 Geology and Mineral Resources Laboratory Testing Quality Management Regulations Part 16: Storage of Laboratory Samples and Secondary Samples
DZ 0129-1994 Quality management specification for laboratory testing of geological and mineral resources

ZA-SANS, lab test stress

ARP 030-1993 The application of SABS 0259, General requirements for the competence of calibration and testing laboratories, by facilities monitoring hazardous chemical substances

IN-BIS, lab test stress

PT-IPQ, lab test stress

NP EN ISO/IEC 17025:2000 General requirements for the competence of testing and calibration laboratories

Canadian Standards Association (CSA), lab test stress

CSA A283-06-2006 Qualification Code for Concrete Testing Laboratories Fourth Edition: Update No 1: September 2007

IFI/FASTNR - Industrial Fastener Institute, lab test stress

139-1991 Quality Assurance Requirements for Fastener Testing Laboratories

Japanese Industrial Standards Committee (JISC), lab test stress

JIS Z 9325:1996 General requirements for the competence of calibration and testing laboratories

CN-STDBOOK, lab test stress

图书 3-9833 Understanding and Implementation of GB/T 27025-2019 "General Requirements for the Capability of Testing and Calibration Laboratories"

The American Road & Transportation Builders Association, lab test stress

AASHTO T 265-2015 Standard Method of Test for Laboratory Determination of Moisture Content of Soils

AASHTO - American Association of State Highway and Transportation Officials, lab test stress

T 265-1993 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
T 288-1991 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity
T 288-2012 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity

GB-REG, lab test stress

REG NASA-LLIS-0729--2000 Lessons Learned ?Integration and Test Practices to Eliminate Stresses on Electrical and Mechanical Components