ZH
RU
ES
Pressure gauge elbow
Pressure gauge elbow, Total:500 items.
In the international standard classification, Pressure gauge elbow involves: Pipeline components and pipelines, Measurement of force, weight and pressure, Precision mechanics, Products of non-ferrous metals, Fasteners, Materials and components for railway engineering, Burners. Boilers, Components for aerospace construction, Valves, Quality, Equipment for the chemical industry, Fluid power systems, On-board equipment and instruments, Aerospace fluid systems and components, Shipbuilding and marine structures in general, Iron and steel products, Safety of machinery, Chipless working equipment, Protection against fire, Pumps, AIRCRAFT AND SPACE VEHICLE ENGINEERING, Vocabularies, Thermodynamics and temperature measurements, Linear and angular measurements, Fasteners for aerospace construction, Materials for aerospace construction, Testing of metals, Road vehicle systems, Earth-moving machinery, Aircraft and space vehicles in general, Wood-based panels, Adhesives, Internal combustion engines for road vehicles, Insulation, Fluid storage devices, Electrical accessories, Equipment for the rubber and plastics industries, Mechanical testing, Reinforced plastics.
German Institute for Standardization, Pressure gauge elbow
- DIN 16282:2004 Siphons for pressure gauges and their accessories
- DIN 3161:1974 Elbow valves for refrigerant circuits; nominal pressure 25 bar
- DIN EN 837-3:2019-08 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996
- DIN 16282:2020 Siphons for pressure gauges and their accessories
- DIN 16282:2020-12 Siphons for pressure gauges and their accessories
- DIN EN 837-1:1997-02 Pressure gauges - Part 1: Bourdon tube pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-1:1996
- DIN 19805:1977 Cast iron special castings for asbestos cement pressure pipe lines; bends
- DIN EN ISO 6803:1997 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997
- DIN 75554:1992-04 Pressure gauges
- DIN 14421:2017-04 Pressure gauges (manometer) for fire pumps
- DIN 14421:2001 Pressure gauges (manometer) for fire pumps
- DIN 14421:2017 Pressure gauges (manometer) for fire pumps
- DIN EN 472:1994-11 Pressure gauges - Vocabulary; German version EN 472:1994
- DIN 75551:1988-05 Pressure gauges for automobiles
- DIN EN 837-2:1997-05 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges; German version EN 837-2:1997
- DIN EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015); German and English version EN ISO 3503:2015
- DIN 2413:2011 Seamless steel tubes for oil- and water-hydraulic systems - Calculation rules for pipes and elbows for dynamic loads
- DIN 8063-1:1986 Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of socket bends
- DIN 74315:1999 Non-soldering compression couplings - Elbow body
- DIN 16962-3:1980 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions
- DIN 16963-3:1980 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions
- DIN 3161:1974-08 Elbow valves for refrigerant circuits; nominal pressure 25 bar
- DIN EN 713:1994 Plastics piping systems; mechanical joints between fittings and polyolefin pressure pipes; test method for leaktightness under internal pressure of assemblies subjected to bending; German version EN 713:1993
- DIN EN 1966:2009-07 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; German version EN 1966:2009
- DIN EN ISO 6803:2010 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2008); German version EN ISO 6803:2008
- DIN EN ISO 6803:2017 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017); German version EN ISO 6803:2017
- DIN 16002:2017-07 Mechanical pressure and temperature gauges - Absolute pressure gauges - Dimensions, Metrology, Requirements and Testing
- DIN EN ISO 3503:2015-06 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015); German and English version EN ISO 3503:2015
- DIN 86001:2010 Pipelines on ships - Pressure ratings, pressure tests
- DIN 86001:2010-09 Pipelines on ships - Pressure ratings, pressure tests
- DIN 16003:2018 Mechanical pressure and temperature gauges - Differential pressure gauges - Dimensions, metrology, requirements and testing
- DIN 2916:1975 Bending Radii for Seamless and Welded Steel Tubes; Design Sheet
- DIN EN 837-3:2019 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing
- DIN 16963-1:1980 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of Segmental Construction for Butt-welding, Dimensions
- DIN 16963-8:1980 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions
- DIN 16962-1:1980 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions
- DIN 16962-6:1980 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions
- DIN V 4279-7:1994 Internal pressure test of pressure pipelines for water - Pressure pipes of low-density polyethylene PE-LD, pressure pipes of high density polyethylene PE-HD (PE 80 and PE 100), pressure pipes of cross-linked polyethylene PE-X and pressure pipes of unplast
- DIN 8063-6:2002 Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 6: Injection-moulded elbows for solvent cementing; Dimensions
Professional Standard - Aviation, Pressure gauge elbow
Defense Logistics Agency, Pressure gauge elbow
- DLA MIL-DTL-55023 D-2011 MANOMETERS, U-TUBE AND CURVED TUBE
- DLA MS51820 REV E NOTICE 1-1999 ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
- DLA MS51820 REV E-1987 ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
- DLA QPL-25867-QPD-2010 Gage, Pressure, Dial Indicating, Pneumatic
- DLA MIL-DTL-25867 D VALID NOTICE 1-2012 Gage, Pressure, Dial Indicating, Pneumatic
- DLA QPL-25867-2012 Gage, Pressure, Dial Indicating, Pneumatic
- DLA MS51813 REV E NOTICE 1-1999 ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
- DLA MS51813 REV E-1987 ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
- DLA MS28924 REV C (1)-2012 HOSE ASSEMBLY, RUBBER, HYDRAULIC 3,000 PSI, ELBOW 90?TO ELBOW 90? FLARED TUBE
- DLA MIL-DTL-9395/10 F VALID NOTICE 1-2012 Switches, Pressure, (Gage), Type II
- DLA A-A-59568 A-2013 GAGES, MECHANICAL, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE
- DLA MS28052 REV C-2011 VALVE, CHECK, PRESSURE GAGE LINES BLEEDER AND FILLER
- DLA MS51815 REV F NOTICE 1-1999 ELBOW, PIPE TO TUBE, 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
- DLA MS51815 REV F-1987 ELBOW, PIPE TO TUBE, 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
- DLA MS51817 REV E NOTICE 1-1999 ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
- DLA MS51817 REV E-1987 ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
- DLA MS39207 REV F-2005 ELBOWS, TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE
- DLA MIL-DTL-52525/41 A-2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE
- DLA MIL-DTL-52525/44-2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREE BENT TUBE
- DLA MIL-DTL-52525/45-2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREE BENT TUBE
- DLA MS51855 REV C NOTICE 1-1999 ELBOW, TUBE, 90 DEGREE, BULKHEAD, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
- DLA MS51855 REV C (1)-1998 ELBOW, TUBE, 90 DEGREE, BULKHEAD, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
- DLA MS51855 REV C-1987 ELBOW, TUBE, 90 DEGREE, BULKHEAD, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
- DLA MIL-DTL-9395/31 E VALID NOTICE 1-2012 Switches, Pressure, (Gage), Type II, 5 Amperes
- DLA MS28780 REV F (1)-2009 FITTING END, 45 DEGREES ELBOW, ATTACHABLE, HYDRAULIC, HIGH PRESSURE HOSE 3000 PSI, FLARED TUBE
- DLA MS28781 REV E (1)-2009 FITTING END, 90 DEGREES ELBOW, ATTACHABLE, HYDRAULIC, HIGH PRESSURE HOSE 3000 PSI, FLARED TUBE
- DLA MIL-DTL-52525/12 C-2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 DEGREE BENT
- DLA QPL-9395-QPD-2010 Switches, Pressure, (Absolute, Gage, and Differential), General Specification for
- DLA QPL-9395-2011 Switches, Pressure, (Absolute, Gage, and Differential), General Specification for
- DLA MS39202 REV F-2002 ELBOWS, PIPE TO TUBE-SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE, MALE PIPE END
- DLA MIL-DTL-9395/1 D VALID NOTICE 1-2012 Switches, Pressure (Gage), Type II, SPDT, 3 Amperes
- DLA A-A-50062 A VALID NOTICE 1-2006 SCALES, SPRING, (SUSPENSION MOUNTED)
- DLA A-A-50062 A-2001 SCALES, SPRING, (SUSPENSION MOUNTED)
- DLA MIL-DTL-25308 C-2010 GAGE, PRESSURE, DIAL INDICATING, HYDRAULIC, TYPE ME-1
ESDU - Engineering Sciences Data Unit, Pressure gauge elbow
- ESDU 83037 D-2007 Pressure losses in curved ducts: single bends.
- ESDU 83037 C-1995 Pressure losses in curved ducts: single bends
- ESDU 77029 C-2007 Pressure losses in curved ducts: coils.
- ESDU 77029-1977 PRESSURE LOSSES IN CURVED DUCTS: COILS
- ESDU 74043-1974 Flexibilities of and stresses in unrestrained pressurised thin pipe bends subjected to in-plane bending.
- ESDU 77009 B-2007 Pressure losses in curved ducts: interaction factors for two bends in series.
- ESDU 77009 A-1990 PRESSURE LOSSES IN CURVED DUCTS: INTERACTION FACTORS FOR TWO BENDS IN SERIES
- ESDU 81041-1981 Flexibilities of and stresses in thin unpressurised pipe bends with flanged ends under in-plane bending: influence of bend angle.
- ESDU 75014-1975 Flexibilities of and stresses in thin pipe bends under in-plane bending: influence of bend angle and tangent pipe ends.
- STRUCT 03.06.05 A-1983 Bending moment in elliptical frames due to internal pressure.
CZ-CSN, Pressure gauge elbow
Korean Agency for Technology and Standards (KATS), Pressure gauge elbow
KR-KS, Pressure gauge elbow
FI-SFS, Pressure gauge elbow
- SFS 3275-1976 Connection dimensions of pressure vessels. Pipeline system. Bend pipe. Internal pressure
- SFS 3275 E-1975 In the event of any differences in interpretation of this standard the Finnish version shall taka precedence over this translation.
- SFS 4240-1978 plastic pipe. PEH-pressure feeding pipe. Estimated pressure measurement
Japanese Industrial Standards Committee (JISC), Pressure gauge elbow
RU-GOST R, Pressure gauge elbow
- GOST 9933-1975 Absolute pressure gauges and u-tubes combined pressure vacuum gauges
- GOST 4.58-1985 System of product quality indices. Pressure gauges, vacuum gauges, pressure-and-vacuum gauges, braught gauges, head gauges, draught-and-head gauges. Nomenclature of indices
- GOST 12.2.017.4-2003 Sheet-bending presses. Safety requirements
- GOST 8.053-1973 State system for ensuring the uniformity of measurements. Pressure, combined pressure-vacuum, vacuum, gauges and draught gauges with pneumatic output signals. Methods of verification
- GOST 18066-1972 Laminated glued wood. Method of determining bending ability
Group Standards of the People's Republic of China, Pressure gauge elbow
SE-SIS, Pressure gauge elbow
- SIS SMS 1648-1955 pressure gauge, safety water pipe
- SIS SMS 1557-1952 Pressure Gauge, Tubular Feather and Center Scale
- SIS SMS 1556-1952 pressure gauge, drawing
- SIS SMS 1558-1952 Pressure gauge, tubular feather and one center scale
- SIS SMS 1555-1952 Pressure Gauges, Ratings and Charts
- SIS SMS 416-1933 Cast iron sleeves for gas and water transportation. 22.5° bend. Nominal pressure: 10
- SIS SMS 414-1933 Cast iron sleeves for gas and water transportation. 90° bend. Nominal pressure: 10
- SIS SMS 415-1933 Cast iron sleeves for gas and water transportation. 45 degree bend. Nominal pressure: 10
- SIS SEN 31 01 71-1961 Edison line, pressure gauge
- SIS SMS 1554-1952 pressure gauge, all qualitative
- SIS SMS 1646-1955 Pressure gauge, valve needle, external thread, nominal pressure: 160
- SIS SMS 1642-1955 Pressure gauge, tap, external thread, standard pressure: 16
- SIS SMS 1644-1955 Pressure gauge, valve needle, external thread, nominal pressure: 64
- SIS SMS 1230-1975 Pipeline systems. Nominal pressure, PN. Working pressure. Test pressure
- SIS SS 11 01 31-1985 Pressure vessel steel - Sampling of steel tubes for pressure purposes
- SIS SMS-1051-1941 Water meter, heavy duty, pressure rating: 12.5
- SIS SMS 1787-1975 Seamless steel tubes for pressure purposes
- SIS SMS 1887-1975 Welded steel tubes for pressure purposes
- SIS SS 1887-1984 Welded steel tubes for pressure purposes
- SIS SS 11 01 31-1984 Sampling of steel tubes for pressure purposes
- SIS SMS 332-1939 Steel pipe, plate pipe, nominal pressure: 6
Taiwan Provincial Standard of the People's Republic of China, Pressure gauge elbow
- CNS 8201-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Duckfoot Bends
- CNS 8199-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Doubles-Socket Bends 30°
- CNS 839-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Double-socket Bends 90
- CNS 849-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Flanged Bends (FB)
- CNS 851-1982 Ductile Cast Iron Special Castings for Main Lines,Double Flanged Bends 45 (DFB-45)
- CNS 840-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Double-Socket Bends 45(DSB-45)
- CNS 841-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Double-Socket Bends 22(DSB-22)
- CNS 842-1982 Ductile Cast Iron Special Castings for Pressure Main Lines,Double-Socket Bends(DSB-11)
- CNS 850-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Double Flanged Duckfoot Bends. (DFDB)
- CNS 5795-1987 Oil Pressure Gauges for Automobiles
- CNS 4626-1995 Carbon Steel Pipes for Pressure Service
RO-ASRO, Pressure gauge elbow
- STAS 3958-1975 Cast ircn pressuie pipes and littings DOUBLE FLANGED 22° 30' BEND NP 10 Dimensions
- STAS 3959-1975 Cast iron pressure pipes and fittings DOUBLE FLANGED 45° BEND NP 10 Dimensions
- STAS 1873-1975 Cast iron pressure pipes and fittings SOCKET 45° BENDS NP 10 Dimensions
- STAS 1872-1975 Cast iron pressure pipes and fittings SOCKirr 11 15' BENDS NP 10 Dimensions
- STAS 4397-1975 Cast iron pressure pipes and fittings DOUBLE FLANGED 11° 15' BEND NP 10 Dimensions
- STAS 1874-1975 Cast iron pressure pipes and fittings FLANGED ELBOW NP 10 Dimensions
- STAS 9985-1974 Cast iron pressure pipcs and fittings [DOUBLE SOCKET 1/4 BEND NP 10 Dimensions
- STAS SR ISO 3503:1995 Assembled joints between fittings and polyethylene (PE) pressure pipes-Test of leakproofness under internai pressure when subjected to bending
- STAS SR ISO 3589-0:1995 Indicating pressure gauges, vacuum gauges and combined pressure and vacuum gauge with pressure-respansive element - Vocabulary
- STAS 10275/4-1991 PLASTER Determination of bending resistance and compression strength
- STAS 7039/2-1983 Pre-stressed concrete pressure tubes CENTRIFUGALLY CAST PRE-STRESSED CONCRETE PRESSURE TUBES
- STAS 7039/3-1983 Pre-strcssed concrete pressure tubes VIBRATED AND COMPRESSED PRE-STRESSED CONCRETE PRESSURE TUBES
- STAS 5308-1986 MANUAL TYKE PHKSSURE INU1CATING GAUGES
- STAS 3589/3-1986 INDICATING PRESSURE GAU- GES, VACUUM GAUGES AND PRE- SURE VACUUM GAUGES WITH ELASTIC .ELEMENT Dials, scales, graphical symbols
- STAS 2697-1951 Steel pipe joints with normal pressures of 25kgf/cm2 and 100kgf/cm2. Elbow, T-tube and sleeved cross sizes
- STAS 10537-1976 CARBON MATERIALS Determination of (he strength to compression, bending and traction
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pressure gauge elbow
Society of Automotive Engineers (SAE), Pressure gauge elbow
- SAE AS411-1948 MANIFOLD PRESSURE INDICATING INSTRUMENTS
- SAE AS411A-1993 MANIFOLD PRESSURE INDICATING INSTRUMENTS
- SAE AS411B-2008 Manifold Pressure Indicating Instruments
- SAE ARP1321-1993 FLEXURE TESTING OF BENT HYDRAULIC TUBING
- SAE AS1584A-1986 ELBOW 90°, TUBE WELD, 3000 PSI. HYDRAULIC
- SAE AS1584-1980 ELBOW 90°, TUBE WELD, 3000 PSI HYDRAULIC
- SAE ARP427-1991 PRESSURE RATIO INSTRUMENTS
- SAE ARP427A-2008 Pressure Ratio Instruments
- SAE ARP1185-1973 FLEXURE TESTING OF HYDRAULIC TUBING JOINTS AND FITTINGS
- SAE ARP1185A-2011 FLEXURE TESTING OF HYDRAULIC TUBING JOINTS AND FITTINGS
- SAE J1347-1996 Guide to Manifold Absolute Pressure Transducer Representative Specification
- SAE AIR1379A-1977 Prestressing (Autofrettaging) of Hydraulic Tubing Lines R(2001)
- SAE AS8042-2008 MANIFOLD PRESSURE INSTRUMENTS
- SAE AS8042-1985 MANIFOLD PRESSURE INSTRUMENTS
- SAE AS4226-1997 Fitting, Elbow, 90 Degree, Beam Seal, Bulkhead, External Swage Tube End, Hydraulic, 3000 psi
- SAE ARP1185B-2013 Flexure Testing of Hydraulic Tubing Joints and Fittings
SAE - SAE International, Pressure gauge elbow
National Metrological Verification Regulations of the People's Republic of China, Pressure gauge elbow
- JJG 52-1999 Verification Regulation of Bourdon Tube Pressure Gauge、Pressure Vacuum Gauge and Vacuum Gauge for General Use
- JJG 457-1986 Verification Regulation of Single Tube Mercury Manometer
- JJG 274-1981 Verification Regulation of Double Tube Mercury Barometer
- JJG 274-2007 Double Tube Mercury Barometer
- JJG 49-1999 Verification Regulation of Bourdon Tube Precision Pressure Gauge and Vacuum Gauge
- JJG 926-2015 Verification Regulation of Record Pressure Gauges, Pressure Vacuum Gauges and Vacuum Gauges
- JJG 926-1997 Verification Regulation of the Record Pressure Gauge、Pressure Vacuum Gauge and Vacuum Gauge
- JJG 573-2003 Capsule Pressure Gauges
- JJG(石油) 32-1994 Anti-shock pressure gauge
- JJG 52-2013 Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use
- JJG 927-1997 Verification Regulation of Tyre Pressure Gauge
- JJG 927-2013 Verification Regulation of Tyre Pressure Gauges
未注明发布机构, Pressure gauge elbow
HU-MSZT, Pressure gauge elbow
- MNOSZ 2998-1952 Cast iron pipe surface pressure 10
- MSZ 2975-1969 Comb-shaped compression pipe. Surface pressure 64.320
- MNOSZ 11205-1952 Pressure Gauge Accessories Flow, Pressure Gauge
- MSZ 2993-1968 Grooved pipe surface pressure 10-100
- MNOSZ 11249-1952 Pressure gauge pipe 80-340 mm to pressure gauge nominal diameter
- MNOSZ 2905-1953 Pipe smooth edge surface pressure 6
- MSZ 2939-1971 Pipe cast steel edge surface pressure 320
- MSZ 2936-1971 Steel alloy pipe edge surface pressure 100
- MSZ 2937-1971 Cast steel pipe edge surface pressure 169
- MSZ 2892-1971 Pipe cast iron edge surface pressure 10
- MSZ 2932-1971 Cast steel pipe edge surface pressure 16
- MNOSZ 2896-1953 Seamless steel pipe. Strong pressure siphon equipment 35.29 steel surface pressure 320 kg/cm2
- MNOSZ 2910-1953 Surface pressure at edge of pipe neck 100
- MNOSZ 2909-1953 Pipe hollow edge surface pressure 64
- MSZ 2938-1971 Steel alloy pipe edge surface pressure 250
- MSZ 2933-1971 Steel alloy pipe edge surface pressure 25
- MSZ 2891-1971 Edge surface pressure of cast iron pipes 6
- MSZ 2895-1971 Pipe ferroalloy edge surface pressure 40
- MSZ 2890-1971 Edge surface pressure of cast iron pipe 2.5
- MSZ 2935-1971 Edge surface pressure of cast steel pipe 64
- MNOSZ 2941-1953 Surface pressure of pipe with tail edge 2.5
- MNOSZ 13787-1955 Knife cutting pipe plug chemical equipment. Surface pressure 6
- MSZ 2873-1986 Pipe surface, operating and test pressures
- MSZ 2894-1971 Iron cast pipe edge surface pressure 25
- MSZ 2923-1968 Pipe weldable steel edge surface pressure 16
- MSZ 11240-1966 Pressure Gauge Accessories Left Thread Welded End Pressure Gauge
- MNOSZ 2918-1953 Reinforceable Neck Pipe Surface Pressure 25
- MSZ 2994-1968 Pipe edge jump out and in. Surface pressure 10.100
- MNOSZ 2973-1951 Planar compression pipeline surface pressure 10-100 kg/cubic centimeter
- MNOSZ 11204-1952 Pressure Gauge Equipment Threads to Pressure Gauge
- MNOSZ 2962-1951 Tail edge weldable pipe surface pressure 6
- MNOSZ 2915-1953 Pipe Tightenable Smooth Edge Surface Pressure 6
- MNOSZ 2946-1951 Pipe smooth, oval edge surface pressure 6
- MNOSZ 2995-1952 Pipe edge filling annular groove surface pressure 10-100
- MNOSZ 2917-1953 Pipe tightenable necked edge surface pressure 16
- MNOSZ 2947-1951 Necked elliptical pipe edge surface pressure 6
- MSZ 8000/3-1979 Hard PCV tube. Sleeve pressure pipe and pressure pipe standard parts
- MNOSZ 2999-1952 Nut links for cast iron pipes with surface pressures 10, 16, 25 and 40
- MNOSZ 2916-1953 Pipe Tightenable Necked Edge Surface Pressure 10
- MNOSZ 2919-1953 Pipe reinforced necked edge surface pressure 40
- MSZ 2927-1968 Steel pipes can be welded with additional edge surface pressure 100
- MSZ 2928-1968 Pipe weldable additional steel edge surface pressure 160
- MSZ 2968-1963 Pipe weldable smooth edge surface pressure 2.5
- MNOSZ 11206-1952 Chemical pressure gauge accessories left and right movable side plates, for pressure gauges
- MNOSZ 11203-1952 Pressure gauges M 12x1,5 and M 20x1,5 are added to the pressure gauges
- MSZ 12910-1971 Pressure vessel data sheet
- MNOSZ 2943-1953 Pipe untensioned edge tail can be welded surface pressure 10
- MNOSZ 2951-1951 The edge pipe is not tightened. With tightenable ring surface pressure 2.5
- MNOSZ 2942-1953 Pipe untensioned edge tail weldable surface pressure 6
- MNOSZ 2948-1951 Pipe necked, oval edge surface pressure 10 and 16
- MNOSZ 11243-1953 Air pressure gauge. For automobiles
- MSZ 4742-1965 Asbestos cement pressure pipe. Multiple connections, pressure pipes and lowering pipes
- MSZ KGST 1855-1979 Air pressure gauges, vacuum pressure gauges, counting tables and proportional tables for vacuum gauges
- MNOSZ 11247-1955 Lubricating oil pressure gauge. For automobiles
- MSZ 2906-1983 Neck edge surface pressure 6
- MNOSZ 2976-1953 Pipe welding membrane filling is used for edge fixing surface pressure 160-320
- MNOSZ 2961-1951 Weldable tail pipe with reinforcement ring surface pressure 2.5
- MNOSZ 85-1952 Cast iron pressure pipe muffle rated pressure 10
- MNOSZ 86-1951 Cast iron pressure pipe flange. Nominal pressure 10
- MSZ KGST 518-1977 Hydraulic and pneumatic energy device surface pressure
- MSZ 2929-1968 Pipes are weldable steel extensions. Side surface pressure of cups, bowls, etc. 250
British Standards Institution (BSI), Pressure gauge elbow
- ASME B40.100-2022 Pressure Gauges and Gauge Attachments
- BS 2G 113:1956 Specification for manifold pressure gauges for aircraft
- BS EN ISO 3503:2015 Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending
- BS EN 713:1995 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
- BS ISO 8574:2004 Aerospace. Hydraulic system tubing. Qualification tests for bent tubes
- BS ISO 16873:2011 Hydraulic fluid power. Pressure switches. Mounting surfaces
NO-SN, Pressure gauge elbow
- NS 5598-1977 Butt welding fittings, bent saddle joints, nominal pressure 16
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Pressure gauge elbow
IN-BIS, Pressure gauge elbow
- IS 11639 Pt.1-1986 Design standards for pressure piping structures Part 1 Surface pressure piping
- IS 3624-1979 Specifications for pressure and vacuum gauges
- IS 1538 Pt.10-1976 Specification for cast iron fittings for water, gas and sewage pressure pipes Part X Special requirements for double socket elbows
- IS 1538 Pt.18-1976 Specifications for cast iron fittings for water, gas and sewage pressure pipes, Part XVIII, Special requirements for double flange elbows
- IS 10732-1983 Pressure Vessel Instrument Glass Buyer Data Sheet
- IS 11625-1986 Hydraulic design standards for pressure pipelines
Danish Standards Foundation, Pressure gauge elbow
- DS/EN 837-1/AC:1999 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
- DS/EN 837-1:1998 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
- DS/EN 472:1996 Pressure gauges - Vocabulary
- DS/EN 837-2:1998 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
- DS/EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
- DS/EN 713:1995 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
- DS/ISO 3503:1988 Assembled joints between fittings and polyethylene (PE) pressure pipes. Test of leak-proofness under internal pressure when subjected to bending
- DS/EN 837-3:1998 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
Lithuanian Standards Office , Pressure gauge elbow
- LST EN 837-1+AC-2001 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
- LST EN 472-2008 Pressure gauges - Vocabulary
- LST EN 837-2-2001 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
- LST EN 1966-2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
- LST EN 713-2002 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
- LST EN 837-3-2001 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
AENOR, Pressure gauge elbow
- UNE-EN 837-1:1997 PRESSURE GAUGES. PART 1: BOURDON TUBE PRESSURE GAUGES. DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING.
- UNE-EN 472:1996 PRESSURE GAUGES. VOCABULARY.
- UNE-EN 837-2:1998 PRESSURE GAUGES. PART 2: SELECTION AND INSTALLATION RECOMMENDATIONS FOR PRESSURE GAUGES.
- UNE-EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
- UNE-EN 837-3:1997 PRESSURE GAUGES. PART 3: DIAPHRAGM AND CAPSULE PRESSURE GAUGES. DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING.
- UNE 27430:2014 Civil shipbuilding and ship repairing. Selective list. Pipes and accessories: Steel pipe elbows
ES-UNE, Pressure gauge elbow
- UNE-EN 837-1/AC:1998 PRESSURE GAUGES. PART 1: BOURDON TUBE PRESSURE GAUGES. DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING.
- UNE-EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015)
Association Francaise de Normalisation, Pressure gauge elbow
- NF EN 837-1:1997 Manomètres - Partie 1 : manomètres à tube de Bourdon. Dimensions, métrologie, prescriptions et essais.
- NF E15-038:1989 INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. ABSOLUTE PRESSURE GAUGES.
- NF E15-034:1989 INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. DIFFERENTIAL GAUGES.
- NF M88-901:1985 Petroleum industry. Checking appliances. Bourdon gauges.
- NF EN 837-3:1997 Manomètres - Partie 3 : manomètres à membrane et manomètres à capsule. Dimensions, métrologie, prescriptions et essais.
- NF EN 472:1994 Manomètres - Vocabulaire
- NF T54-008*NF EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
- NF EN 837-2:1997 Manomètres - Partie 2 : recommandations sur le choix et l'installation des manomètres.
- NF ISO 3567:2013 Manomètres - Étalonnage par comparaison directe avec un manomètre de référence
- NF T54-008:1994 Plastics piping systems. Mechanical joints between fittings and polyolefin pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending.
- NF EN 1966:2009 Adhésifs structuraux - Caractérisation d'une surface par mesure de l'adhérence au moyen de la méthode de la flexion en trois points
- NF EN ISO 3503:2015 Systèmes de canalisations en plastique - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai pour l'étanchéité sous pression interne de montages soumis à une courbure
- NF E48-427*NF ISO 16873:2012 Hydraulic fluid power - Pressure switches - Mounting surfaces
Professional Standard - Chemical Industry, Pressure gauge elbow
- HG/T 21581-1995HK02 Pressure Gauge and Pressure Transmitter Pipeline Connection Installation Atlas
ISA - International Society of Automation, Pressure gauge elbow
Professional Standard - Machinery, Pressure gauge elbow
American Welding Society (AWS), Pressure gauge elbow
- WRC 179:1972 Stress Indices and Flexibility Factors for Moment Loadings on Elbows and Curved Pipe
Professional Standard-Ships, Pressure gauge elbow
Indonesia Standards, Pressure gauge elbow
Professional Standard - Petroleum, Pressure gauge elbow
- SY/T 5211-1993 High pressure pipe connection and high pressure swivel elbow
IT-UNI, Pressure gauge elbow
- UNI 6568-1969 Gray iron pressure pipes, fittings and special parts, replacing uni 3766. Casing elbow joint
- UNI 6570-1969 Gray iron pressure pipe pipes, joints and special parts. Bracket flange elbow joint
- UNI 7390-1975 Cast iron pipes and joints for unpressurized waste water, rainwater drains and exhaust pipes. 45° elbow joint
- UNI 6569-1969 Gray iron pressure pipes, fittings and special parts, replacing uni 3768. Flange elbow joint
- UNI 7391-1975 Cast iron pipes and joints for unpressurized waste water, rainwater drains and exhaust pipes. 67°30' elbow joint
- UNI 7392-1975 Cast iron pipes and joints for unpressurized waste water, rainwater drains and exhaust pipes. 87°30' elbow joint
- UNI 7527-P2-1976 Lead pipe. Pipe for pressure pipe
- UNI 1283-1967 pipeline. Nominal pressure
WRC - Welding Research Council, Pressure gauge elbow
- BULLETIN 179-1972 STRESS INDICES AND FLEXIBILITY FACTIORS FOR MOMENT LOADINGS ON ELBOWS AND CURVED PIPE
- BULLETIN 472-2002 USING FINITE ELEMENT ANALYSIS TO DETERMINE PIPING ELBOW BENDING MOMENT (B2) STRESS INDICES
National Metrological Technical Specifications of the People's Republic of China, Pressure gauge elbow
- JJF 1328-2011 Calibration Specification for Pressure Regulators with Bourdon Tube Pressure Gauge
- JJF 1511-2015 Program of Pattern Evaluation of the Record Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges
- JJF 1415-2013 Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use
- JJF(机械) 036-2008 Calibration Specifications for Seismic Pressure Gauge
United States Navy, Pressure gauge elbow
- NAVY MIL-HDBK-801-1990 LIST OF PRESSURE GAUGES
- NAVY MIL-H-24239 NOTICE 1-1998 HOSE ASSEMBLIES, HYDRAULIC, NONMAGNETIC, FOR MINESWEEPING TENSIOMETERS
- NAVY MIL-H-24239 (2)-1967 HOSE ASSEMBLIES, HYDRAULIC, NONMAGNETIC, FOR MINESWEEPING TENSIOMETERS
- NAVY MIL-H-24239-1966 HOSE ASSEMBLIES, HYDRAULIC, NONMAGNETIC, FOR MINESWEEPING TENSIOMETERS
- NAVY MS28077 REV D VALID NOTICE 1-1987 GAGE-PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE
- NAVY MS28077 REV D-1980 GAGE-PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE
- NAVY MS17856 REV A VALID NOTICE 1-2013 Gage, Pressure, Dial Indicating, Stainless Steel Case
Professional Standard - Agriculture, Pressure gauge elbow
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Pressure gauge elbow
National Aeronautics and Space Administration (NASA), Pressure gauge elbow
- NASA-TN-D-71-1959 An approximate method for calculating surface pressures on curved profile blunt plates in hypersonic flow
Professional Standard - Farm Machinery, Pressure gauge elbow
- NJ 239-1981 Spring tube pressure gauges for tractors and internal combustion engines
European Committee for Standardization (CEN), Pressure gauge elbow
- EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015)
- EN 713:1993 Plastics Piping Systems - Mechanical Joints Between Fittings and Polyolefin Pressure Pipes - Test Method for Leaktightness Under Internal Pressure of Assemblies Subjected to Bending
- EN ISO 7751:2016 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)
International Organization for Standardization (ISO), Pressure gauge elbow
- ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
- ISO 3503:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of leakproofness under internal pressure when subjected to bending
- ISO 2533:1975/Add 1:1985 Standard Atmosphere — Addendum 1: Hypsometrical tables
- ISO 13665:1997 Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections
- ISO 1746:1998/Cor 1:1999 Rubber or plastics hoses and tubing - Bending tests
- ISO 2441:1975 Pipeline flanges for general use — Shapes and dimensions of pressure-tight surfaces
- ISO 5359:1989/Cor 1:1995 Low-pressure flexible connecting assemblies (hose assemblies) for use with medical gas systems; Technical Corrigendum 1
- ISO 4179:2024 Ductile iron pipes and fittings for pressure and non-pressure pipelines
- ISO 16873:2002 Hydraulic fluid power - Pressure switches - Mounting surfaces
- ISO 16873:2011 Hydraulic fluid power - Pressure switches - Mounting surfaces
- ISO 5893:2002 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification
API - American Petroleum Institute, Pressure gauge elbow
North Atlantic Treaty Organization Standards Agency, Pressure gauge elbow
American Water Works Association (AWWA), Pressure gauge elbow
AT-ON, Pressure gauge elbow
- ONORM EN 713-1994 Plastics piping systems. Mechanical joints between fittings and polyolefin pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending
PL-PKN, Pressure gauge elbow
- PN M42335-1988 Pressure gauges for welding
- PN H74162-1962 Cast iron special castings for pressure main lines. 11 15, 22°30,' 45° aocket bends with screwed-gland joint
- PN M42318-1993 Manometers for pressure measurement in vehicle tyres. Requirements and tests
- PN H74163-1962 Cast iron castings for pressur? main lines. 90° sooket bends with sorewed-gland joint
- PN M42303-1988 Pressure gauges ixture ocks
Professional Standard - Automobile, Pressure gauge elbow
CH-SNV, Pressure gauge elbow
- SNV 71520 a-1959 Thermoplastic pipes. Negative pressure unplasticized polyvinyl chloride (PVC) pressure pipe and accessories. List
- SN ISO 105/X09:1984 pipeline. Ferrous metal piping notes and guidelines. Rated pressure; working pressure; test pressure
- SNV 37107-1966 pipeline. Flange type, nominal pressure and nominal size range. Summary table
BE-NBN, Pressure gauge elbow
- NBN EN 713-1994 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
NATO - North Atlantic Treaty Organization, Pressure gauge elbow
Professional Standard - Aerospace, Pressure gauge elbow
- QJ 2984-1997 Compression block for common parts of elbow fixture
- QJ 203-1986 Nominal pressure and test pressure of pipes and piping accessories
- QJ 2889.7-1997 37° Conduit Connector Pressure Gauge Transition Straight Fitting Type and Size
机械工业部, Pressure gauge elbow
American National Standards Institute (ANSI), Pressure gauge elbow
ZA-SANS, Pressure gauge elbow
- SANS 50712:1993 Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force
- SANS 50713:1993 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
- SANS 1315:2006 Polypropylene pressure pipes
International Code Council, Pressure gauge elbow
Building Officials and Code Administrators International(U.S.), Pressure gauge elbow
Henan Provincial Standard of the People's Republic of China, Pressure gauge elbow
Standard Association of Australia (SAA), Pressure gauge elbow
工业和信息化部/国家能源局, Pressure gauge elbow
Military Standard of the People's Republic of China-General Armament Department, Pressure gauge elbow
Professional Standard - Geology, Pressure gauge elbow
- DZ/T 0177-1997 General technical specifications for drilling pressure gauges and pressure gauges for drilling
ES-AENOR, Pressure gauge elbow
- UNE 53-407-1986 plastic. Polybutylene pipe assemblies with mechanical accessories for conducting pressure fluids. Internal pressure tightness caused by bending
- UNE 19 002 pipeline. Pressure segment setting. Rated pressure; working pressure; test pressure
GOSTR, Pressure gauge elbow
- GOST R ISO 3503-2020 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under internal pressure of assemblies subjected to bending
US-FCR, Pressure gauge elbow
CEN - European Committee for Standardization, Pressure gauge elbow
- DD ENV 1966-1995 Structural Adhesives - Characterization of a Surface by a Measuring Adhesion by Means of the Three Point Bending Method
(U.S.) Ford Automotive Standards, Pressure gauge elbow
CN-STDBOOK, Pressure gauge elbow
- 图书 A-4545 Pressure gauge verification and calibration
BR-ABNT, Pressure gauge elbow
U.S. Air Force, Pressure gauge elbow
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Pressure gauge elbow
American Society of Mechanical Engineers (ASME), Pressure gauge elbow
Zhejiang Provincial Standard of the People's Republic of China, Pressure gauge elbow
- DB3309/T 35-2019 Specifications for the maintenance and management of pressure vessels and pressure pipelines in cold storage
Underwriters Laboratories (UL), Pressure gauge elbow
Professional Standard - Special Equipment Specification, Pressure gauge elbow
- TSG R1001-2008 Design Appraisal Regulations for Pressure Vessel & Pressure Pipe