ZH
RU
ES

Pressure gauge elbow

Pressure gauge elbow, Total:499 items.

In the international standard classification, Pressure gauge elbow involves: Pipeline components and pipelines, Measurement of force, weight and pressure, Precision mechanics, Products of non-ferrous metals, Fasteners, Materials and components for railway engineering, Burners. Boilers, Components for aerospace construction, Valves, Quality, Fluid power systems, Equipment for the chemical industry, On-board equipment and instruments, Aerospace fluid systems and components, Iron and steel products, Safety of machinery, Chipless working equipment, Shipbuilding and marine structures in general, Protection against fire, Pumps, AIRCRAFT AND SPACE VEHICLE ENGINEERING, Vocabularies, Thermodynamics and temperature measurements, Linear and angular measurements, Testing of metals, Road vehicle systems, Fasteners for aerospace construction, Materials for aerospace construction, Aircraft and space vehicles in general, Earth-moving machinery, Wood-based panels, Adhesives, Insulation, Internal combustion engines for road vehicles, Fluid storage devices, Electrical accessories, Equipment for the rubber and plastics industries, Mechanical testing.


German Institute for Standardization, Pressure gauge elbow

  • DIN 16282:2004 Siphons for pressure gauges and their accessories
  • DIN 2605-1:1991 Steel butt-welding pipe fittings; elbows and bends with reduced pressure factor
  • DIN 3161:1974 Elbow valves for refrigerant circuits; nominal pressure 25 bar
  • DIN EN 837-3:2019-08 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996
  • DIN 16282:2020 Siphons for pressure gauges and their accessories
  • DIN 16282:2020-12 Siphons for pressure gauges and their accessories
  • DIN EN 837-1:1997-02 Pressure gauges - Part 1: Bourdon tube pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-1:1996
  • DIN 19805:1977 Cast iron special castings for asbestos cement pressure pipe lines; bends
  • DIN EN ISO 6803:1997 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997
  • DIN 75554:1992 Pressure gauges
  • DIN 75554:1992-04 Pressure gauges
  • DIN 14421:2017-04 Pressure gauges (manometer) for fire pumps
  • DIN 14421:2001 Pressure gauges (manometer) for fire pumps
  • DIN 14421:2017 Pressure gauges (manometer) for fire pumps
  • DIN EN 472:1994-11 Pressure gauges - Vocabulary; German version EN 472:1994
  • DIN 75551:1988-05 Pressure gauges for automobiles
  • DIN EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015); German and English version EN ISO 3503:2015
  • DIN EN 837-2:1997-05 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges; German version EN 837-2:1997
  • DIN 2413:2011 Seamless steel tubes for oil- and water-hydraulic systems - Calculation rules for pipes and elbows for dynamic loads
  • DIN 8063-1:1986 Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of socket bends
  • DIN 74315:1999 Non-soldering compression couplings - Elbow body
  • DIN 16962-3:1980 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions
  • DIN 16963-3:1980 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions
  • DIN 7638:1985 Compression couplings with spherical liner; equal elbows
  • DIN 3161:1974-08 Elbow valves for refrigerant circuits; nominal pressure 25 bar
  • DIN EN 713:1994 Plastics piping systems; mechanical joints between fittings and polyolefin pressure pipes; test method for leaktightness under internal pressure of assemblies subjected to bending; German version EN 713:1993
  • DIN EN ISO 6803:2010 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2008); German version EN ISO 6803:2008
  • DIN EN ISO 6803:2017 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017); German version EN ISO 6803:2017
  • DIN EN 1966:2009-07 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; German version EN 1966:2009
  • DIN 16002:2017-07 Mechanical pressure and temperature gauges - Absolute pressure gauges - Dimensions, Metrology, Requirements and Testing
  • DIN EN ISO 3503:2015-06 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015); German and English version EN ISO 3503:2015
  • DIN 86001:2010 Pipelines on ships - Pressure ratings, pressure tests
  • DIN 86001:2010-09 Pipelines on ships - Pressure ratings, pressure tests
  • DIN 2916:1975 Bending Radii for Seamless and Welded Steel Tubes; Design Sheet
  • DIN 16003:2018 Mechanical pressure and temperature gauges - Differential pressure gauges - Dimensions, metrology, requirements and testing
  • DIN EN 837-3:2019 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing
  • DIN 16963-8:1980 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions
  • DIN 16963-1:1980 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of Segmental Construction for Butt-welding, Dimensions
  • DIN 16962-1:1980 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions
  • DIN 16962-6:1980 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions
  • DIN 8063-6:2002 Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 6: Injection-moulded elbows for solvent cementing; Dimensions
  • DIN V 4279-7:1994 Internal pressure test of pressure pipelines for water - Pressure pipes of low-density polyethylene PE-LD, pressure pipes of high density polyethylene PE-HD (PE 80 and PE 100), pressure pipes of cross-linked polyethylene PE-X and pressure pipes of unplast

Professional Standard - Aviation, Pressure gauge elbow

Defense Logistics Agency, Pressure gauge elbow

ESDU - Engineering Sciences Data Unit, Pressure gauge elbow

  • ESDU 83037 D-2007 Pressure losses in curved ducts: single bends.
  • ESDU 83037 C-1995 Pressure losses in curved ducts: single bends
  • ESDU 77029 C-2007 Pressure losses in curved ducts: coils.
  • ESDU 77029-1977 PRESSURE LOSSES IN CURVED DUCTS: COILS
  • ESDU 74043-1974 Flexibilities of and stresses in unrestrained pressurised thin pipe bends subjected to in-plane bending.
  • ESDU 77009 B-2007 Pressure losses in curved ducts: interaction factors for two bends in series.
  • ESDU 77009 A-1990 PRESSURE LOSSES IN CURVED DUCTS: INTERACTION FACTORS FOR TWO BENDS IN SERIES
  • ESDU 81041-1981 Flexibilities of and stresses in thin unpressurised pipe bends with flanged ends under in-plane bending: influence of bend angle.
  • ESDU 75014-1975 Flexibilities of and stresses in thin pipe bends under in-plane bending: influence of bend angle and tangent pipe ends.
  • STRUCT 03.06.05 A-1983 Bending moment in elliptical frames due to internal pressure.

CZ-CSN, Pressure gauge elbow

Korean Agency for Technology and Standards (KATS), Pressure gauge elbow

KR-KS, Pressure gauge elbow

FI-SFS, Pressure gauge elbow

  • SFS 3275-1976
  • SFS 3275 E-1975 In the event of any differences in interpretation of this standard the Finnish version shall taka precedence over this translation.

Japanese Industrial Standards Committee (JISC), Pressure gauge elbow

RU-GOST R, Pressure gauge elbow

  • GOST 9933-1975 Absolute pressure gauges and u-tubes combined pressure vacuum gauges
  • GOST 4.58-1985 System of product quality indices. Pressure gauges, vacuum gauges, pressure-and-vacuum gauges, braught gauges, head gauges, draught-and-head gauges. Nomenclature of indices
  • GOST 12.2.017.4-2003 Sheet-bending presses. Safety requirements
  • GOST 8.053-1973 State system for ensuring the uniformity of measurements. Pressure, combined pressure-vacuum, vacuum, gauges and draught gauges with pneumatic output signals. Methods of verification
  • GOST 18066-1972 Laminated glued wood. Method of determining bending ability

Taiwan Provincial Standard of the People's Republic of China, Pressure gauge elbow

  • CNS 8201-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Duckfoot Bends
  • CNS 8199-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Doubles-Socket Bends 30°
  • CNS 839-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Double-socket Bends 90
  • CNS 849-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Flanged Bends (FB)
  • CNS 851-1982 Ductile Cast Iron Special Castings for Main Lines,Double Flanged Bends 45 (DFB-45)
  • CNS 840-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Double-Socket Bends 45(DSB-45)
  • CNS 841-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Double-Socket Bends 22(DSB-22)
  • CNS 842-1982 Ductile Cast Iron Special Castings for Pressure Main Lines,Double-Socket Bends(DSB-11)
  • CNS 850-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Double Flanged Duckfoot Bends. (DFDB)
  • CNS 5795-1987 Oil Pressure Gauges for Automobiles

SE-SIS, Pressure gauge elbow

Group Standards of the People's Republic of China, Pressure gauge elbow

RO-ASRO, Pressure gauge elbow

  • STAS 3958-1975 Cast ircn pressuie pipes and littings DOUBLE FLANGED 22° 30' BEND NP 10 Dimensions
  • STAS 3959-1975 Cast iron pressure pipes and fittings DOUBLE FLANGED 45° BEND NP 10 Dimensions
  • STAS 1873-1975 Cast iron pressure pipes and fittings SOCKET 45° BENDS NP 10 Dimensions
  • STAS 1872-1975 Cast iron pressure pipes and fittings SOCKirr 11 15' BENDS NP 10 Dimensions
  • STAS 4397-1975 Cast iron pressure pipes and fittings DOUBLE FLANGED 11° 15' BEND NP 10 Dimensions
  • STAS 1874-1975 Cast iron pressure pipes and fittings FLANGED ELBOW NP 10 Dimensions
  • STAS 9985-1974 Cast iron pressure pipcs and fittings [DOUBLE SOCKET 1/4 BEND NP 10 Dimensions
  • STAS SR ISO 3503:1995 Assembled joints between fittings and polyethylene (PE) pressure pipes-Test of leakproofness under internai pressure when subjected to bending
  • STAS SR ISO 3589-0:1995 Indicating pressure gauges, vacuum gauges and combined pressure and vacuum gauge with pressure-respansive element - Vocabulary
  • STAS 10275/4-1991 PLASTER Determination of bending resistance and compression strength
  • STAS 7039/2-1983 Pre-stressed concrete pressure tubes CENTRIFUGALLY CAST PRE-STRESSED CONCRETE PRESSURE TUBES
  • STAS 3589/3-1986 INDICATING PRESSURE GAU- GES, VACUUM GAUGES AND PRE- SURE VACUUM GAUGES WITH ELASTIC .ELEMENT Dials, scales, graphical symbols
  • STAS 7039/3-1983 Pre-strcssed concrete pressure tubes VIBRATED AND COMPRESSED PRE-STRESSED CONCRETE PRESSURE TUBES
  • STAS 5308-1986 MANUAL TYKE PHKSSURE INU1CATING GAUGES
  • STAS 2697-1951
  • STAS 10537-1976 CARBON MATERIALS Determination of (he strength to compression, bending and traction

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pressure gauge elbow

Society of Automotive Engineers (SAE), Pressure gauge elbow

SAE - SAE International, Pressure gauge elbow

National Metrological Verification Regulations of the People's Republic of China, Pressure gauge elbow

  • JJG 52-1999 Verification Regulation of Bourdon Tube Pressure Gauge、Pressure Vacuum Gauge and Vacuum Gauge for General Use
  • JJG 457-1986 Verification Regulation of Single Tube Mercury Manometer
  • JJG 274-1981 Verification Regulation of Double Tube Mercury Barometer
  • JJG 274-2007 Double Tube Mercury Barometer
  • JJG 49-1999 Verification Regulation of Bourdon Tube Precision Pressure Gauge and Vacuum Gauge
  • JJG 926-2015 Verification Regulation of Record Pressure Gauges, Pressure Vacuum Gauges and Vacuum Gauges
  • JJG 926-1997 Verification Regulation of the Record Pressure Gauge、Pressure Vacuum Gauge and Vacuum Gauge
  • JJG 573-2003 Capsule Pressure Gauges
  • JJG(石油) 32-1994 Anti-shock pressure gauge
  • JJG 52-2013 Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use
  • JJG 927-1997 Verification Regulation of Tyre Pressure Gauge
  • JJG 927-2013 Verification Regulation of Tyre Pressure Gauges

HU-MSZT, Pressure gauge elbow

未注明发布机构, Pressure gauge elbow

British Standards Institution (BSI), Pressure gauge elbow

  • ASME B40.100-2022 Pressure Gauges and Gauge Attachments
  • 2G 113-1956 Specification for manifold pressure gauges for aircraft
  • BS 2G 113:1956 Specification for manifold pressure gauges for aircraft
  • BS EN ISO 3503:2015 Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending
  • BS EN 713:1995 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
  • BS ISO 8574:2004 Aerospace. Hydraulic system tubing. Qualification tests for bent tubes
  • BS ISO 16873:2011 Hydraulic fluid power. Pressure switches. Mounting surfaces

NO-SN, Pressure gauge elbow

  • NS 5598-1977 Butt welding fittings, bent saddle joints, nominal pressure 16

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Pressure gauge elbow

IN-BIS, Pressure gauge elbow

Danish Standards Foundation, Pressure gauge elbow

  • DS/EN 837-1/AC:1999 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
  • DS/EN 837-1:1998 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
  • DS/EN 472:1996 Pressure gauges - Vocabulary
  • DS/EN 837-2:1998 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
  • DS/EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
  • DS/EN 713:1995 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
  • DS/ISO 3503:1988 Assembled joints between fittings and polyethylene (PE) pressure pipes. Test of leak-proofness under internal pressure when subjected to bending
  • DS/EN 837-3:1998 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing

Lithuanian Standards Office , Pressure gauge elbow

  • LST EN 837-1+AC-2001 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
  • LST EN 472-2008 Pressure gauges - Vocabulary
  • LST EN 837-2-2001 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
  • LST EN 1966-2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
  • LST EN 713-2002 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
  • LST EN 837-3-2001 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing

AENOR, Pressure gauge elbow

  • UNE-EN 837-1:1997 PRESSURE GAUGES. PART 1: BOURDON TUBE PRESSURE GAUGES. DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING.
  • UNE-EN 472:1996 PRESSURE GAUGES. VOCABULARY.
  • UNE-EN 837-2:1998 PRESSURE GAUGES. PART 2: SELECTION AND INSTALLATION RECOMMENDATIONS FOR PRESSURE GAUGES.
  • UNE-EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
  • UNE-EN 837-3:1997 PRESSURE GAUGES. PART 3: DIAPHRAGM AND CAPSULE PRESSURE GAUGES. DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING.
  • UNE 27430:2014 Civil shipbuilding and ship repairing. Selective list. Pipes and accessories: Steel pipe elbows

ES-UNE, Pressure gauge elbow

  • UNE-EN 837-1/AC:1998 PRESSURE GAUGES. PART 1: BOURDON TUBE PRESSURE GAUGES. DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING.
  • UNE-EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015)

Association Francaise de Normalisation, Pressure gauge elbow

  • NF EN 837-1:1997 Manomètres - Partie 1 : manomètres à tube de Bourdon. Dimensions, métrologie, prescriptions et essais.
  • NF E15-038:1989 INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. ABSOLUTE PRESSURE GAUGES.
  • NF E15-034:1989 INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. DIFFERENTIAL GAUGES.
  • NF M88-901:1985 Petroleum industry. Checking appliances. Bourdon gauges.
  • NF EN 837-3:1997 Manomètres - Partie 3 : manomètres à membrane et manomètres à capsule. Dimensions, métrologie, prescriptions et essais.
  • NF EN 472:1994 Manomètres - Vocabulaire
  • NF T54-008*NF EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
  • NF EN 837-2:1997 Manomètres - Partie 2 : recommandations sur le choix et l'installation des manomètres.
  • NF ISO 3567:2013 Manomètres - Étalonnage par comparaison directe avec un manomètre de référence
  • NF T54-008:1994 Plastics piping systems. Mechanical joints between fittings and polyolefin pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending.
  • NF EN ISO 3503:2015 Systèmes de canalisations en plastique - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai pour l'étanchéité sous pression interne de montages soumis à une courbure
  • NF EN 1966:2009 Adhésifs structuraux - Caractérisation d'une surface par mesure de l'adhérence au moyen de la méthode de la flexion en trois points
  • NF E48-427*NF ISO 16873:2012 Hydraulic fluid power - Pressure switches - Mounting surfaces

Professional Standard - Chemical Industry, Pressure gauge elbow

  • HG/T 21581-1995HK02 Pressure Gauge and Pressure Transmitter Pipeline Connection Installation Atlas

ISA - International Society of Automation, Pressure gauge elbow

American Welding Society (AWS), Pressure gauge elbow

  • WRC 179:1972 Stress Indices and Flexibility Factors for Moment Loadings on Elbows and Curved Pipe

Professional Standard - Machinery, Pressure gauge elbow

Indonesia Standards, Pressure gauge elbow

IT-UNI, Pressure gauge elbow

Professional Standard - Petroleum, Pressure gauge elbow

  • SY/T 5211-1993 High pressure pipe connection and high pressure swivel elbow

Professional Standard-Ships, Pressure gauge elbow

WRC - Welding Research Council, Pressure gauge elbow

  • BULLETIN 179-1972 STRESS INDICES AND FLEXIBILITY FACTIORS FOR MOMENT LOADINGS ON ELBOWS AND CURVED PIPE
  • BULLETIN 472-2002 USING FINITE ELEMENT ANALYSIS TO DETERMINE PIPING ELBOW BENDING MOMENT (B2) STRESS INDICES

National Metrological Technical Specifications of the People's Republic of China, Pressure gauge elbow

  • JJF 1328-2011 Calibration Specification for Pressure Regulators with Bourdon Tube Pressure Gauge
  • JJF 1511-2015 Program of Pattern Evaluation of the Record Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges
  • JJF 1415-2013 Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use
  • JJF(机械) 036-2008 Calibration Specifications for Seismic Pressure Gauge

National Aeronautics and Space Administration (NASA), Pressure gauge elbow

  • NASA-TN-D-71-1959 An approximate method for calculating surface pressures on curved profile blunt plates in hypersonic flow

Professional Standard - Farm Machinery, Pressure gauge elbow

  • NJ 239-1981 Spring tube pressure gauges for tractors and internal combustion engines

United States Navy, Pressure gauge elbow

Professional Standard - Agriculture, Pressure gauge elbow

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Pressure gauge elbow

European Committee for Standardization (CEN), Pressure gauge elbow

  • EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015)
  • EN 713:1993 Plastics Piping Systems - Mechanical Joints Between Fittings and Polyolefin Pressure Pipes - Test Method for Leaktightness Under Internal Pressure of Assemblies Subjected to Bending
  • EN ISO 7751:2016 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)

International Organization for Standardization (ISO), Pressure gauge elbow

  • ISO 3503:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of leakproofness under internal pressure when subjected to bending
  • ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
  • ISO 2533:1975/Add 1:1985 Standard Atmosphere — Addendum 1: Hypsometrical tables
  • ISO 5359:1989/Cor 1:1995 Low-pressure flexible connecting assemblies (hose assemblies) for use with medical gas systems; Technical Corrigendum 1
  • ISO 1746:1998/Cor 1:1999 Rubber or plastics hoses and tubing - Bending tests
  • ISO 2441:1975 Pipeline flanges for general use — Shapes and dimensions of pressure-tight surfaces
  • ISO 16873:2002 Hydraulic fluid power - Pressure switches - Mounting surfaces
  • ISO 16873:2011 Hydraulic fluid power - Pressure switches - Mounting surfaces
  • ISO 5893:2002 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification

API - American Petroleum Institute, Pressure gauge elbow

AT-ON, Pressure gauge elbow

  • ONORM EN 713-1994 Plastics piping systems. Mechanical joints between fittings and polyolefin pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending

North Atlantic Treaty Organization Standards Agency, Pressure gauge elbow

American Water Works Association (AWWA), Pressure gauge elbow

BE-NBN, Pressure gauge elbow

  • NBN EN 713-1994 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending

CH-SNV, Pressure gauge elbow

PL-PKN, Pressure gauge elbow

  • PN M42335-1988 Pressure gauges for welding
  • PN H74162-1962 Cast iron special castings for pressure main lines. 11 15, 22°30,' 45° aocket bends with screwed-gland joint
  • PN M42318-1993 Manometers for pressure measurement in vehicle tyres. Requirements and tests
  • PN H74163-1962 Cast iron castings for pressur? main lines. 90° sooket bends with sorewed-gland joint
  • PN M42303-1988 Pressure gauges ixture ocks

Professional Standard - Automobile, Pressure gauge elbow

NATO - North Atlantic Treaty Organization, Pressure gauge elbow

  • AEP-51-2007 Miniaturised Piezo-Electric Gauges (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int. For additional informat

American National Standards Institute （ANSI), Pressure gauge elbow

Professional Standard - Aerospace, Pressure gauge elbow

  • QJ 2984-1997 Compression block for common parts of elbow fixture
  • QJ 203-1986 Nominal pressure and test pressure of pipes and piping accessories

机械工业部, Pressure gauge elbow

ZA-SANS, Pressure gauge elbow

  • SANS 50712:1993 Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force
  • SANS 50713:1993 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
  • SANS 1315:2006 Polypropylene pressure pipes

ES-AENOR, Pressure gauge elbow

International Code Council, Pressure gauge elbow

Building Officials and Code Administrators International(U.S.), Pressure gauge elbow

Henan Provincial Standard of the People's Republic of China, Pressure gauge elbow

Standard Association of Australia （SAA）, Pressure gauge elbow

工业和信息化部/国家能源局, Pressure gauge elbow

Military Standard of the People's Republic of China-General Armament Department, Pressure gauge elbow

GOSTR, Pressure gauge elbow

  • GOST R ISO 3503-2020 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under internal pressure of assemblies subjected to bending

Professional Standard - Geology, Pressure gauge elbow

  • DZ/T 0177-1997 General technical specifications for drilling pressure gauges and pressure gauges for drilling

CEN - European Committee for Standardization, Pressure gauge elbow

  • DD ENV 1966-1995 Structural Adhesives - Characterization of a Surface by a Measuring Adhesion by Means of the Three Point Bending Method

US-FCR, Pressure gauge elbow

BR-ABNT, Pressure gauge elbow

(U.S.) Ford Automotive Standards, Pressure gauge elbow

CN-STDBOOK, Pressure gauge elbow

U.S. Air Force, Pressure gauge elbow

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Pressure gauge elbow

American Society of Mechanical Engineers (ASME), Pressure gauge elbow

Zhejiang Provincial Standard of the People's Republic of China, Pressure gauge elbow

  • DB3309/T 35-2019 Specifications for the maintenance and management of pressure vessels and pressure pipelines in cold storage

Underwriters Laboratories (UL), Pressure gauge elbow

  Technical conditions for small radius elbows for waste heat boilers, Pressure gauge elbow, Oil and gas elbow, iso elbow, Pressure gauge elbow, Small radius elbow, Radius Elbow, bent pipe, pressure gauge bend, Common Parts for Bend Clamps, Pressure gauge spring tube.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved