ZH
RU
ES
Suture Strength Testing
Suture Strength Testing, Total:499 items.
In the international standard classification, Suture Strength Testing involves: Products of the textile industry, Sacks. Bags, Non-textile floor coverings, Clothes, Non-destructive testing, Mechanical testing, Leather technology, Equipment for entertainment, Welding, brazing and soldering, Structures of buildings, Road engineering, Protection of and in buildings, Medical equipment, Construction materials, Adhesives, Interior finishing, Wood-based panels, Sewing machines and other equipment for the clothing industry, Footwear, Pipeline components and pipelines, Rubber and plastics products, Measurement of volume, mass, density, viscosity, Construction equipment, Mining equipment, Packaging materials and accessories, Bridge construction, Testing of metals, Materials for the reinforcement of composites, Measurement of force, weight and pressure, Fluid storage devices, Farming and forestry, Nuclear energy engineering, Construction industry, Paint ingredients, Wood, sawlogs and sawn timber, Occupational safety. Industrial hygiene, Fuels, Pharmaceutics, Resistors, Electricity. Magnetism. Electrical and magnetic measurements, Integrated circuits. Microelectronics, Inorganic chemicals, Cans. Tins. Tubes, Mining and quarrying, Iron and steel products, Paper products, Powder metallurgy, Surface treatment and coating, Dentistry, Reinforced plastics, Freight distribution of goods, Sports equipment and facilities, Plastics, Products of non-ferrous metals, Paper and board, Continuous handling equipment, Products of the chemical industry, Analytical chemistry, Inks. Printing inks, Refractories, Rubber, Shipbuilding and marine structures in general, Elements of buildings, Protection against fire.
YU-JUS, Suture Strength Testing
Korean Agency for Technology and Standards (KATS), Suture Strength Testing
PL-PKN, Suture Strength Testing
European Committee for Standardization (CEN), Suture Strength Testing
- EN 684:1995 Resilient floor coverings - Determination of seam strength
- prEN 684-1992 Resilient floorcoverings; determination of seam strength
- prEN 846-2-1992 Methods of tests for ancillary components for masonry; part 2: determination of bond strength of bed joint reinforcement in mortar joints
- EN 846-2:2000 Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
- EN ISO 22825:2017 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)
- EN 12697-46:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests
- EN 15387:2011 Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam
- EN 1926:2006 Natural stone test methods - Determination of uniaxial compressive strength
- EN 1926:1999 Natural Stone Test Methods - Determination of Compressive Strength
- prEN 846-3-1992 Methods of tests for ancillary components for masonry; part 3: determination of shear strength of welds in bed joint reinforcement
- EN ISO 10675-2:2013 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys
- EN ISO 10675-2:2017 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys
- EN ISO 10675-2:2021 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2021, Corrected version 2022-02)
- prEN 23327-1992 Hardmetals; determination of transverse rupture strength (ISO 3327:1982)
- prEN 26922-1992 Adhesives; determination of tensile strength of butt joints (ISO 6922:1987)
- EN ISO 10675-1:2016 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel@ nickel@ titanium and their alloys
- EN ISO 10675-1:2021 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel@ nickel@ titanium and their alloys
- EN ISO 10675-1:2013 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys [Superseded: CEN EN 12517-1]
Taiwan Provincial Standard of the People's Republic of China, Suture Strength Testing
TR-TSE, Suture Strength Testing
- TS 1619-1974 SEAM BREAKING STRENGTH OF WOVEN TEXTILE FABRICS
Japanese Industrial Standards Committee (JISC), Suture Strength Testing
- JIS Z 0215:1996 Testing method of stitch strength for sewn kraft paper sacks
国家市场监督管理总局、中国国家标准化管理委员会, Suture Strength Testing
- GB/T 38898-2020 Non-destructive testing—Testing method for measuring coating bond strength using ultrasonic wave
- GB/T 40732-2021 Non-destructive testing of welds—Ultrasonic testing—Testing of welds in austenitic steels and nickel-based alloys
- GB/T 39789-2021 Non-destructive testing of welds—Eddy current-video integrated testing method of metal composites weld
- GB/T 3903.43-2019 Footwear—Test methods for uppers,lining and insocks—Seam strength
- GB/T 37910.2-2019 Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
- GB/T 38947-2020 Magnetic flux density test method for magnetic separators
- GB/T 37910.1-2019 Non-destructive testing of welds—Acceptance levels for radiographic testing—Part 1:Steel,nickel,titanium and their alloys
- GB/T 39163-2020 Test methods of the bonding strength for target-backing plate assemblies
ZA-SANS, Suture Strength Testing
- SANS 6132:1989 Wet stitch tear strength of leather welting
- SANS 5633:1968 Determination of wet stitch tear strength (leather, leatherboard, fibreboard)
- SANS 5652:1972 Determination of split tear strength of elastomeric material
Association Francaise de Normalisation, Suture Strength Testing
- NF EN 12773:2000 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance du point de couture
- NF G52-005:2007 Leather - Physical and mechanical tests - Measurement of stitch tear resistance.
- NF A89-523:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys.
- NF A89-523*NF EN ISO 22825:2017 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- NF P62-128*NF EN 684:1996 Resilient floor coverings. Determination of seam strength.
- NF EN 514:2018 Plastiques - Profilés à base de poly(chlorure de vinyle) (PVC) - Détermination de la résistance des assemblages soudés en angle et en T
- NF M60-407*NF ISO 10980:1998 Validation of the strength of reference solutions used for measuring concentrations.
- NF A89-523:2006 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys.
- NF EN ISO 22825:2017 Essais non destructif des assemblages soudés - Contrôle par ultrasons - Contrôle des soudures en aciers austénitiques et en alliages à base nickel
- NF EN ISO 3327:2009 Métaux-durs - Détermination de la résistance à la flexion
- NF EN 846-3:2000 Méthodes d'essai des composants accessoires de maçonnerie - Partie 3 : détermination de la résistance au cisaillement des soudures dans l'armature du joint d'assise
- NF A89-511-2*NF EN ISO 10675-2:2021 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2 : aluminium and its alloys
- NF A95-423:1993 Hardmetals. Determination of transverse rupture strength.
- NF T76-125:1986 Adhesives. Conventional determination of setting strength.
- NF A91-211*NF EN ISO 14916:2017 Thermal spraying - Determination of tensile adhesive strength
- NF G62-301*NF EN 12774:2000 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance
- NF A89-511-1*NF EN ISO 10675-1:2021 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1 : steel, nickel, titanium and their alloys
- NF P98-818-46:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: low temperature cracking and properties by uniaxial tension tests
- NF A95-423*NF EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
- NF G38-119*NF EN 14151:2010 Geosynthetics - Determination of burst strength
- NF EN 14151:2010 Géosynthétiques - Détermination de la résistance à l'éclatement
- NF EN 846-2:2000 Méthodes d'essai des composants accessoires de maçonnerie - Partie 2 : détermination de la résistance de l'adhérence des armatures dans les joints
Professional Standard - Light Industry, Suture Strength Testing
- QB/T 4872-2015 Test method of artificial leather and synthetic leather.Test method of seam strength
German Institute for Standardization, Suture Strength Testing
- DIN 55543-3:1985 Testing of packaging; methods of test for plastic sacks; determination of the strenght of longitudinal seams
- DIN EN ISO 22825:2018-02 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017); German version EN ISO 22825:2017
- DIN EN 684:1996 Resilient floor coverings - Determination of seam strength; German version EN 684:1995
- DIN EN ISO 22825:2018 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
- DIN EN 684:1996-07 Resilient floor coverings - Determination of seam strength; German version EN 684:1995
- DIN 53255:1964 Testing of wood adhesives and glued wood joints; shear and delamination tests for determining the failing strength of plywood bonds (plywood and coreboard)
- DIN 66061-9:1972 Household sewing-machines; testing of loss of tensile strength of needle thread by sewing
- DIN 53766-1:1991 Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength
- DIN 55543-3:2010 Packaging test - Test methods for packaging films - Part 3: Determination of the strength of longitudinal seams of sacks and bags
- DIN 18555-3:1982 Testing of mortars containing mineral binders; hardened mortars; determination of flexural strength, compressive strength and bulk density
- DIN EN 846-2:2000 Methods of tests for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints; German version EN 846-2:2000
- DIN 52377:1978 Testing of plywood; determination of modulus of elasticity in tension and of tensile strength
- DIN 52376:1978 Testing of plywood; determination of compression strength parallel to the surfaces
- DIN 52376:2016 Testing of plywood - Determination of compression strength parallel to the surfaces
- DIN 52377:2016 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
- DIN EN 15387:2011-10 Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam; German version EN 15387:2011
- DIN EN ISO 17697:2016-10 Footwear - Test methods for uppers, lining and insocks - Seam strength (ISO 17697:2016); German version EN ISO 17697:2016
- DIN EN ISO 18119:2021-09 Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing (ISO 18119:2018 + Amd.1:2021); German version EN ISO 18119:2018 + A1:2021
- DIN 51717:2016 Testing of solid fuels - Determination of mechanical strength of coke
- DIN 51717:1994 Testing of solid fuels; determination of mechanical strength of coke
- DIN 55529:2012-09 Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material
- DIN 18555-6:1987 Testing of mortars containing mineral binders; determination of bond strength of hardened mortar
- DIN 55529:2005 Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material
- DIN 55529:2012 Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material
- DIN 51910:1997 Testing of carbon materials - Determination of compressive strength - Solid materials
- DIN EN ISO 22825:2006 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2006); English version of DIN EN ISO 22825:2006-10
- DIN EN ISO 10675-2:2022-05 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2021, Corrected version 2022-02); German version EN ISO 10675-2:2021
- DIN 53864:1978 Testing of textiles; determination of the bending strength, method according to Schlenker
- DIN EN 582:1994 Thermal spraying; determination of tensile adhesive strength; German version EN 582:1993
- DIN 18555-9:1999 Testing of mortars containing mineral binders - Part 9: Hardened mortars; determination of the mortar compressive strength in the bed joint
- DIN 51914:1985 Testing of carbon materials; determination of tensile strength; solid matters
- DIN EN ISO 3327:2009-10 Hardmetals - Determination of transverse rupture strength (ISO 3327:2009); German version EN ISO 3327:2009
- DIN EN 14151:2010-11 Geosynthetics - Determination of burst strength; German version EN 14151:2010
- DIN 61551:2008-01 Geosynthetics - Determination of burst strength
- DIN EN 12228:2013-12 Surfaces for sports areas - Determination of joint strength of synthetic surfaces; German version EN 12228:2013
- DIN EN ISO 29022:2013-09 Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013); German version EN ISO 29022:2013
- DIN EN ISO 10675-2:2018 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2017)
- DIN 53366:1983 Testing of plastic films and sheetings; determination of blocking strength
- DIN 18554-1:1985 Testing of masonry; determination of compressive strenght and of elastic modulus
- DIN 52461:2015 Testing of sealing compounds in building construction - Rain strength of just applied sprayable jointing products
- DIN 52461:2000 Testing of sealing compounds in building construction - Rain strength of just applied sprayable jointing products
American Society for Testing and Materials (ASTM), Suture Strength Testing
- ASTM D4884/D4884M-22 Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
- ASTM D4884/D4884M-14 Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
- ASTM D4884/D4884M-14a Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
- ASTM D6644-01 Standard Test Method for Tension Strength of Sew-Through Flange Buttons
- ASTM D4884-96(2003) Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
- ASTM D4884-96 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
- ASTM D4884-09 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
- ASTM D4884-12 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
- ASTM D4786-00 Standard Test Method for Stitch Tear Strength, Single Hole
- ASTM D4786-00(2016) Standard Test Method for Stitch Tear Strength, Single Hole
- ASTM D4786-00(2020) Standard Test Method for Stitch Tear Strength, Single Hole
- ASTM D4786-00(2005) Standard Test Method for Stitch Tear Strength, Single Hole
- ASTM D4786-00(2010) Standard Test Method for Stitch Tear Strength, Single Hole
- ASTM D4884-09e1 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
- ASTM D4884-13 Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
- ASTM D4705-00(2010) Standard Test Method for Stitch Tear Strength of Leather, Double Hole
- ASTM D6644-01(2021) Standard Test Method for Tension Strength of Sew-Through Flange Buttons
- ASTM D4705-18(2023) Standard Test Method for Stitch Tear Strength of Leather, Double Hole
- ASTM D4705-12 Standard Test Method for Stitch Tear Strength of Leather, Double Hole
- ASTM D4705-13 Standard Test Method for Stitch Tear Strength of Leather, Double Hole
- ASTM A714-99(2003) Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
- ASTM A714-99 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
- ASTM D1683/D1683M-17 Standard Test Method for Failure in Sewn Seams of Woven Fabrics
- ASTM A618-74 Standard Specification for Hot-Formed Welded And Seamless High-Strength Low-Alloy Structural Tubing
- ASTM D4705-00(2005) Standard Test Method for Stitch Tear Strength of Leather, Double Hole
- ASTM A618/A618M-21 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM A714-99(2009)e1 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
- ASTM D5822-03(2007) Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D5822-03 Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D5822-13(2019) Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D5822-13 Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D5822-02 Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D3931-93a(2005) Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM D3931-93a(1999)e1 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM D7571-10 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
- ASTM D7571-10(2014)e1 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
- ASTM A618-01 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM A618-99 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM A618/A618M-04 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM A618/A618M-04(2010) Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM A618/A618M-04(2015) Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM D5822-00 Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D5822-08 Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D1683/D1683M-11 Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics
- ASTM D6636-01(2018) Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
- ASTM C1531-22 Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index
- ASTM A847/A847M-05 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
- ASTM A847/A847M-12 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
- ASTM A847/A847M-11 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
- ASTM A847/A847M-14 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
- ASTM E215-16 Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube
- ASTM D7056-07(2018) Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams
RU-GOST R, Suture Strength Testing
- GOST R 57264-2016 Fittings for horizontal joints of masonry. Method for adhesive strength determining
- GOST 23351-1978 Textile terry cloth and piece goods. Method for determination of fixhere strength of loop threads
- GOST 28073-1989 Sewing articles. Methods for the determination of breaking load, elongation of thread seams, slippage of fibre trends in seams
- GOST R 53005-2008 Surgical suture materials. General technical requirements. Test methods
- GOST 28966.1-1991 Polymer adhesives. Method of determining cleavage strength
- GOST 28966.2-1991 Polymer adhesives. Method of determining peel strength
- GOST 21395.7-1975 Resistors variable. Test method for stop strength
- GOST 22690-2015 Concretes. Determination of strength by mechanical methods of nondestructive testing
- GOST 22690-1988 Concretes. Determination of strength by mechanical methods of nondestructive testing
- GOST 14760-1969 Adhesives. Method of determination of tensile strength
- GOST 9624-1993 Laminated glued wood method for determination of shear strength
- GOST 26128-1984 Polymer films. Methods of tear resistance determination
- GOST 9624-2009 Laminated glued wood. Method for determination of shear strength
- GOST ISO 13765-4-2017 Refractory mortars. Determination of flexural bonding strength
- GOST R 57867-2017 Polymer composites. Test methods for determination of pull-through resistance
- GOST 27647-1988 Veriable resistors. Test method of mechanical strength of lead screw
IN-BIS, Suture Strength Testing
Indonesia Standards, Suture Strength Testing
- SNI 19-0363-1989 Test method for sewing strength of gunny sacks
- SNI 03-6758-2002 Test method for compressive strength of asphalt mixture
- SNI 08-4648-1998 Test method for seam strength of knitted fabrics by bursting strength tester (diaphragm method )
- SNI ISO 10675-2:2010 Non-destructive testing of welds - Acceptance levels for radiographic testing - part 2 : Alumunium and its alloys
- SNI ISO 10675-1:2010 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1 : Steel, nickel, titanium and their alloys
NL-NEN, Suture Strength Testing
- NEN 1769-1965 Textiie testing: determination of the seam strength
- NEN-EN 582-1994 Thermal spraying.Determination of adhesive tensile strength
Liaoning Provincial Standard of the People's Republic of China, Suture Strength Testing
- DB21/T 2249-2014 On-the-spot rapid detection method of seam peel strength of asphalt waterproof membrane
- DB21/T 2601-2016 Technical specification for testing the compressive strength of concrete by post-anchor method
HU-MSZT, Suture Strength Testing
KR-KS, Suture Strength Testing
Danish Standards Foundation, Suture Strength Testing
- DS/EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- DS/EN 12808-3:2008 Grouts for tiles - Part 3: Determination of flexural and compressive strength
- DS/EN 684:1996 Resilient floor coverings - Determination of seam strength
- DS/EN 582:1993 Thermal spraying. Determination of tensile adhesive strength
- DS/EN ISO 10675-2:2013 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys
- DS/EN 582:1994 Thermal spraying - Determination of tensile adhesive strength
- DS/EN ISO 10675-1:2013 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys
- DS/EN 12228:2013 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
- DS/EN 1971-1:2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- DS/EN 23327:1994 Hardmetals. Determination of transverse rupture strength
- DS/EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
- DS/EN 14151:2010 Geosynthetics - Determination of burst strength
- DS/EN 846-2:2002 Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
Professional Standard - Agriculture, Suture Strength Testing
- 309药典 四部-2020 4000 Testing methods for pharmaceutical packaging materials 4008 Determination of heat seal strength
- 305药典 四部-2020 4000 Testing methods for pharmaceutical packaging materials 4004 Determination of peel strength
工业和信息化部, Suture Strength Testing
- QB/T 4874-2015 Artificial Leather Test Methods for Synthetic Leather Determination of Fatigue Strength of Seams
- QB/T 5488-2020 Method for determination of composite strength of liquid ink
Lithuanian Standards Office , Suture Strength Testing
- LST EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)
- LST EN 12808-3-2009 Grouts for tiles - Part 3: Determination of flexural and compressive strength
- LST EN 684-2002 Resilient floor coverings - Determination of seam strength
- LST EN 582-2001 Thermal spraying - Determination of tensile adhesive strength
- LST EN 12228-2003 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
- LST EN 1971-1-2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- LST EN 14151-2010 Geosynthetics - Determination of burst strength
- LST EN 846-2-2000 Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
AENOR, Suture Strength Testing
- UNE-EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)
- UNE-EN 12808-3:2009 Grouts for tiles - Part 3: Determination of flexural and compressive strength
- UNE-EN 684:1996 Resilient floor coverings - Determination of seam strength
- UNE 56539:1978 DETERMINATION OF STRENGHT AGAINST CLEFT. PHYSICAL-MECHANICAL CHARACTERISTICS OF WOOD.
- UNE-EN 12228:2014 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
- UNE-EN 1971-1:2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- UNE-EN 14151:2010 Geosynthetics - Determination of burst strength
- UNE 53612:1984 RUBBER-ANALYSIS OF MULTI-PEAK TRACES OBTAINED IN DETERMINATIONS OF TEAR STRENGTH AND ADHESION STRENGTH
- UNE-EN ISO 10675-2:2013 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2010)
ES-UNE, Suture Strength Testing
- UNE-EN ISO 22825:2018 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
- UNE-EN ISO 17697:2016 Footwear - Test methods for uppers, lining and insocks - Seam strength (ISO 17697:2016)
- UNE-EN ISO 18119:2020 Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing (ISO 18119:2018)
- UNE-EN ISO 18119:2020/A1:2021 Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 1 (ISO 18119:2018/Amd 1:2021)
- UNE-EN ISO 10675-2:2022 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2021, Corrected version 2022-02)
- UNE-EN ISO 10675-1:2022 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2021)
RO-ASRO, Suture Strength Testing
British Standards Institution (BSI), Suture Strength Testing
- BS EN 684:1996 Resilient floor coverings - Determination of seam strength
- BS 3531-23.1:1991 Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness
- BS ISO 16906:2015 Resilient floor coverings. Determination of seam strength
- BS EN ISO 11666:2011 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
- BS EN ISO 11666:2010 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
- BS EN ISO 23277:2015 Tracked Changes. Non-destructive testing of welds. Penetrant testing. Acceptance levels
- BS EN ISO 23278:2015 Tracked Changes. Non-destructive testing of welds. Magnetic particle testing. Acceptance levels
- BS EN ISO 11666:2018 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
- BS EN ISO 22825:2017 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys
- PD ISO/TR 18124:2006 Plastics piping systems. Multilayer M (metal) pipes. Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
- BS EN ISO 18119:2018+A1:2021 Gas cylinders. Seamless steel and seamless aluminium-alloy gas cylinders and tubes. Periodic inspection and testing
- BS 5756:1997 Specification for visual strength grading of hardwood
- BS EN ISO 10675-2:2017 Non-destructive testing of welds. Acceptance levels for radiographic testing. Aluminium and its alloys
- BS EN ISO 10675-2:2013 Non-destructive testing of welds. Acceptance levels for radiographic testing. Aluminium and its alloys
- BS EN ISO 22825:2012 Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys
- PD ISO/TS 20746:2016 Dentistry. Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
- BS ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
- BS ISO 15509:2001 Adhesives - Determination of the bond strength of engineering-plastic joints
- BS PD ISO/TS 20746:2016 Dentistry. Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
- 20/30415201 DC BS EN ISO 18119 AMD1. Gas cylinders. Seamless steel and seamless aluminium-alloy gas cylinders and tubes. Periodic inspection and testing
- BS EN 16210:2013 Transportation loads. Measurement and evaluation of climatic and other loads. Data acquisition and general requirements for measuring equipment
- BS ISO 12817:2013 Fibre-reinforced plastic composites. Determination of open-hole compression strength
- BS EN ISO 4761:2022 Non-destructive testing of welds. Phased array ultrasonic testing (PAUT) for thin-walled steel components. Acceptance levels
- 23/30470623 DC BS EN ISO 18119 AMD 2. Gas cylinders. Seamless steel and seamless aluminium-alloy gas cylinders and tubes. Periodic inspection and testing
- BS ISO 12815:2013 Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength
- BS EN 1464:2010 Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method
- BS EN ISO 10675-1:2016 Non-destructive testing of welds. Acceptance levels for radiographic testing. Steel, nickel, titanium and their alloys
- BS EN ISO 10675-1:2013 Non-destructive testing of welds. Acceptance levels for radiographic testing. Steel, nickel, titanium and their alloys
(U.S.) Ford Automotive Standards, Suture Strength Testing
International Organization for Standardization (ISO), Suture Strength Testing
- ISO 16906:2015 Resilient floor coverings - Determination of seam strength
- ISO 12579:2007 Timber structures - Glued laminated timber - Method of test for shear strength of glue lines
- ISO 4587:1979 Adhesives; Determination of tensile lap-shear strength of high strength adhesive bonds
- ISO 22825:2006 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- ISO 22825:2017 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- ISO 10675-2:2021 Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
- ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
- ISO 10675-1:2021 Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
- ISO 14916:1999 Thermal spraying - Determination of tensile adhesive strength
- ISO/TS 20746:2016 Dentistry - Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
- ISO 12817:2013 Fibre-reinforced plastic composites - Determination of open-hole compression strength
- ISO 12817:2012 Fibre-reinforced plastic composites - Determination of open-hole compression strength
- ISO 15509:2001 Adhesives - Determination of the bond strength of engineering-plastic joints
- ISO 15107:1998 Adhesives - Determination of cleavage strength of bonded joints
- ISO 3327:1975 Title missing - Legacy paper document
- ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
- ISO 16260:2016 Paper and board - Determination of internal bond strength
- ISO 6922:1987 Adhesives; Determination of tensile strength of butt joints
- ISO 3327:1982 Hardmetals; Determination of transverse rupture strength
- ISO 12815:2013 Fibre-reinforced plastic composites - Determination of plain-pin bearing strength
Standard Association of Australia (SAA), Suture Strength Testing
ESDU - Engineering Sciences Data Unit, Suture Strength Testing
- ESDU 92017-1992 Fatigue strength of cruciform and other fillet welded joints in aluminium alloys.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Suture Strength Testing
- GB/T 3903.43-2008 Footwear.Test methods for uppers,lining and insocks.Seam strength
- GB/T 9846.12-1988 Plywood--Determination of glue bond strength
- GB/T 1742-1979 Methods of test for adhesive strength of sizes
- GB/T 28277-2012 Silicon-based MEMS fabrication technology.Measurement method of cutting and pull-press strength of micro bonding area
- GB/T 14074.10-1993 Test methods for wood adhesives and their resins - Determination of wood bonding strength
- GB/T 19496-2004 Determinating of the compressive strength of spun high-strength concrete cores
- GB/T 6548-2011 Determination of ply adhesive strength for corrugated fiberboard
- GB/T 6548-1998 Corrugated fibreboard--Determination of ply adhesive strength
- GB/T 8642-2002 Thermal spraying--Determination of tensile adhesive strength
- GB/T 6760-1986 Flat belts--Determination of ply adhesion
- GB/T 3687-1989 V-belts--Determination of ply adhesion
- GB/T 12833-2006 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
Professional Standard - Construction Industry, Suture Strength Testing
- JGJ/T 294-2013 Technical specification for strength testing of high strength concrete
- JG/T 507-2016 Digital sticking strength tester
- JG 3056-1999 Digital sticking strength tester
- JGJ/T 368-2015 Technical specification for testing shear strength of masonry and strength of mortar with drilled core
- JGJ/T 384-2016 Technical specification for testing concrete strength by core drilling method
- JGJ/T 23-2001 Technical specification for inspection of concrete compressive strength by rebound method
- JGJ/T 23-2001(条文说明) Technical Specification for Inspection of Concrete Compressive Strength by Rebound Method(explanation)
- JGJ/T 23-2011 Technical specification for inspecting of concrete compressive strength by rebound method
- JGJ/T 23-1992 Technical Specification for Inspection of Concrete Compressive Strength by Rebound Method(explanation)
- JGJ/T 378-2016 Technical specification for testing the compressive strength of concrete by pull-off method
- JGJ/T 136-2017 Technical specification for testing compressive strength of masonry mortar by penetration resistance method
- JGJ/T 136-2001 Technical specification for testing compressive strength of masonry mortar by penetration resistance method
- JGJ/T 136-2001(条文说明) Technical specification for testing compressive strength of masonry mortar by penetration resistance method(explanation)
- JGJ/T 208-2010 Technical specification for inspection of concrete compressive strength by post-installed adhesive anchorage method
- JGJ/T 234-2011 Technical specification for testing the compressive strength of masonry mortar by selective pressure method
Professional Standard - Pharmaceutical Packaging, Suture Strength Testing
Professional Standard - Coal, Suture Strength Testing
Society of Automotive Engineers (SAE), Suture Strength Testing
- SAE AMS2649D-2019 Etch Inspection of High Strength Steel Parts
- SAE ARP4462A-2018 Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts
- SAE ARP4462-2010 BARKHAUSEN NOISE INSPECTION FOR DETECTING GRINDING BURNS IN HIGH STRENGTH STEEL PARTS
- SAE ARP4462B-2019 Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts
国家安全生产监督管理总局, Suture Strength Testing
CU-NC, Suture Strength Testing
- NC 40-128-1987 Textiles. Determination of Stitch Density. Testing Methods
Professional Standard - Recommended Standards for Engineering Construction, Suture Strength Testing
- CECS 02-1988 TECHNICAL SPECIFICATION FOR TESTING CONCRETE STRENGTH BY ULTRASONIC-REBOUND COMBINED METHOD
- CECS 02-2005 Technical specification for testing concrete strength by ultrasonic rebound comprehensive method
- CECS 03-1988 TECHNICAL SPECIFICATION FOR TESTING CONCRETE STRENGTH WITH DRILLED CORE
- CECS 03-2007 Technical specification for testing concrete strength with drilled core
- CECS 69-1994 TECHNICAL SPECIFICATION FOR INSPECTION OF CONCRETE STRENGTH BY PULL-OUT POST-INSERT METHOD
- CECS 278-2010 Technical specification for testing of concrete compressive strength by shear-pressure method
Professional Standard - Traffic, Suture Strength Testing
- JT/T 1166-2017 Non destructive testing for compressive strength of high strength concrete of bridges
Group Standards of the People's Republic of China, Suture Strength Testing
- T/CSTM 00674-2023 Non-destructive testing—Steel products—Automatic testing of wate-jet coupling ultrasonic for seamless steel tube
- T/HBMIF 005-2022 Technical requirements for ground strength detector
- T/CECS 02-2020 Technical specification for testing concrete compressive strength by ultrasonic rebound comprehensive method
- T/ZZXJX 052-2021 Technical specification for testing concrete strength by core drilling method
- T/JSTJXH 21-2023 Technical specification for butt welds of clad steel plates and T-joint welds of U-rib nondestructive testing in bridges deck slab
- T/CECS 965-2021 Technical specification for testing wood strength by pendulum hammer method
- T/CECS 914-2021 Test standard for bond strength of facing stone in construction engineering
- T/ZS 0336-2022 Technical specification for testing tensile strength of steel construction in site by Leeb-hardness method
- T/CECS 964-2021 Technical specification for testing yield strength of steel by pendulum hammer method
Guangdong Provincial Standard of the People's Republic of China, Suture Strength Testing
- DB44/T 1853-2016 Method for determination of seaming strength of zipper and bag materials
CZ-CSN, Suture Strength Testing
WRC - Welding Research Council, Suture Strength Testing
- BULLETIN 213-1976 WELDABILITY OF NIOBIUM CONTAINING HIGH STRENGTH LOW ALLOY STEEL; A REVIEW OF THE STRUCTURE AND PROPERTIES OF WELDS IN COLUMBIUM OR VANADIUM CONTAINING HIGH STRENGTH LOW ALLOY STEELS
GM Europe, Suture Strength Testing
- GME GMI 60347-2012 Bond Strength of Dielectrically Produced Welding Seams of Assembly Components in Body Interior Equipment (English/German; This standard may be applied only for current projects incl. 4403 (“Junior”). It is Superceded for all future projects and replaced b
Xinjiang Provincial Standard of the People's Republic of China, Suture Strength Testing
- DB65/T 4166-2018 Test method for the length and strength of wool bundles of sheep wool—Quick detection of wool bundle length and strength—Body test method
Shandong Provincial Standard of the People's Republic of China, Suture Strength Testing
- DB37/T 2361-2013 Technical specification for testing concrete compressive strength by ultrasonic rebound comprehensive method
- DB37/T 2361-2022 Technical Regulations for Testing the Compressive Strength of Concrete by Ultrasonic Rebound Comprehensive Method
- DB37/T 2371-2013 Technical specification for testing masonry shear strength and masonry mortar strength by core drilling method
- DB37/T 2371-2022 Technical Regulations for Testing the Shear Strength of Masonry and the Strength of Masonry Mortar by Core Drilling Method
- DB37/T 5169-2020 Technical specification for testing the strength of building steel by imprint method
- DB37/T 2368-2013 Technical specification for testing the compressive strength of concrete by core drilling method
- DB37/T 2366-2013 Technical specification for testing the compressive strength of concrete by rebound method
- DB37/T 2368-2022 Technical Regulations for Testing the Compressive Strength of Concrete by Core Drilling Method
- DB37/T 2366-2022 Technical Regulations for Testing the Compressive Strength of Concrete by Rebound Method
- DB37/T 5046-2015 Technical specification for on-site testing of tensile strength of building steel by Leeb hardness method
- DB37/T 2367-2013 Technical specification for testing the compressive strength of masonry mortar by rebound method
- DB37/T 2364-2013 Technical specification for testing the compressive strength of concrete by post-anchor method
- DB37/T 2363-2013 Technical specification for testing the compressive strength of masonry mortar by penetration method
- DB37/T 2364-2022 Technical Regulations for Testing the Compressive Strength of Concrete by Post-Anchoring Method
- DB37/T 2363-2022 Technical Regulations for Testing the Compressive Strength of Masonry Mortar by Penetration Method
- DB37/T 2367-2022 Technical Regulations for Testing the Compressive Strength of Masonry Mortar by Rebound Method
- DB37/T 5171-2020 Technical specification for testing concrete compressive strength by tensile stress method
BR-ABNT, Suture Strength Testing
Professional Standard - Labor and Labor Safety, Suture Strength Testing
- LD 83-1995 Rules of inspect for classification standard of labor intensity at physical work
AASHTO - American Association of State Highway and Transportation Officials, Suture Strength Testing
- TP 91-2015 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test
- TP 91-2011 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Asphalt Bond Strength (ABS) Test
The American Road & Transportation Builders Association, Suture Strength Testing
- AASHTO TP 91-2015 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test
- AASHTO TP 91-2011 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Asphalt Bond Strength (ABS) Test
GM Daewoo, Suture Strength Testing
- GMKOREA EDS-T-7713-2012 Method of Testing the Adhesion Strength of Adhesives ???? ???? ???? Version 3; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW3371 [Replaced: GMKOREA EDS-T-7713]
CEN - European Committee for Standardization, Suture Strength Testing
- EN ISO 22825:2006 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- PREN 1971-1-2019 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
- EN 14151:2010 Geosynthetics - Determination of burst strength
VN-TCVN, Suture Strength Testing
- TCVN 6898-2001 Paper.Determination of surface strength.Wax pick method
Professional Standard - Aviation, Suture Strength Testing
- HB 20096-2012 Barkhausen inspection for thermal damage of high-strength steel
Ningxia Provincial Standard of the People's Republic of China, Suture Strength Testing
- DB64/T 1647-2019 Technical specification for testing the compressive strength of high-strength concrete by rebound method
American Gear Manufacturers Association, Suture Strength Testing
- AGMA 02FTM5-2002 Crack Length and Depth Determination in an Integrated Carburized Gear/Bearing
GM North America, Suture Strength Testing
未注明发布机构, Suture Strength Testing
- BS 5131-5.13:1980(1999) Methods of test for Footwear and footwear materials — Part 5 : Testing of complete footwear — Section 5.13 Measurement of the strength of stitched seams in upper and lining materials CEDIREER) REP TY HS PERNAL :
- BS EN ISO 10675-2:2021(2022) Non - destructive testing of welds — Acceptance levels for radiographic testing Part 2 : Aluminium and its alloys
- BS ISO 16260:2016(2018) Paper and board — Determination of internal bond strength
- BS EN 582:1994(1999) Thermal spraying — Determination of tensile adhesive strength
Professional Standard - Civil Aviation, Suture Strength Testing
- MH/T 3027-2013 Test method for adhesion or cohesion strength of thermal spray coatings
Professional Standard - Earthquake, Suture Strength Testing
- DB/T 28-2008 Calibration code of measuring instruments for magnetic induction of low field
National Metrological Technical Specifications of the People's Republic of China, Suture Strength Testing
- JJF 1372-2012 Calibration Specification for Instrument of Testing Mortar-strength by Penetration Resistance Method
National Metrological Verification Regulations of the People's Republic of China, Suture Strength Testing
- JJG(机械) 7-1990 Verification rules for single particle compressive strength tester
Professional Standard - Railway, Suture Strength Testing
- TB 10426-2004 Specification for testing the strength of concrete for railway engineering structures
- TB 10426-2019 Specification for testing the strength of concrete for railway engineering structures
Professional Standard - Military and Civilian Products, Suture Strength Testing
- WJ 2283-1995 Verification rules for activated carbon and impregnated carbon strength tester
Anhui Provincial Standard of the People's Republic of China, Suture Strength Testing
- DB34/T 233-2022 Technical specification for testing the compressive strength of mortar by penetration method
- DB34/T 2463-2015 Ultrasonic rebound comprehensive method for testing technical specifications for concrete compressive strength in highway engineering
- DB34/T 569-2022 Technical specification for testing the compressive strength of concrete by shear compression method
- DB34/T 234-2022 Technical specification for testing the compressive strength of bricks in masonry by rebound method
- DB34/T 233-2002 Technical specification for testing the compressive strength of masonry mortar by penetration method
Military Standard of the People's Republic of China-General Armament Department, Suture Strength Testing
- GJB 8645-2015 Calibration procedures for alternating magnetic induction intensity measuring coils
Sichuan Provincial Standard of the People's Republic of China, Suture Strength Testing
- DB51/T 1996-2015 Technical specification for testing structural concrete strength by ultrasonic rebound comprehensive method in highway engineering
Professional Standard - Commodity Inspection, Suture Strength Testing
- SN/T 1665-2005 Test method for peeling strength of sole adhesive bonds of shoes
Professional Standard - Machinery, Suture Strength Testing
- JB/T 7150-1993 Main inspection items and detection methods of high-strength bolts for construction machinery
Beijing Provincial Standard of the People's Republic of China, Suture Strength Testing
- DB11/T 1446-2017 Technical regulations for testing the compressive strength of pumped concrete by rebound method and ultrasonic rebound comprehensive method
Hebei Provincial Standard of the People's Republic of China, Suture Strength Testing
- DB13/T 5385-2021 Technical requirements for robot detection of concrete compressive strength
- DB13/T 5157-2019 Straightness and roundness detection of titanium and titanium alloy bars
Yunnan Provincial Standard of the People's Republic of China, Suture Strength Testing
- DB53/T 715-2015 Technical specification for testing the compressive strength of concrete by pull-off method
Professional Standard - Textile, Suture Strength Testing
- FZ/T 01030-2016 Knitted fabric and elastic woven fabric.Determination of maximum force to seam rupture and bursting distension.Bursting method
- FZ/T 01030-1993 Determination of seam strength and expansion of knitted and elastic woven fabrics Burst method
American National Standards Institute (ANSI), Suture Strength Testing
- ANSI/ASTM D5045:1999 Test Method for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials (08.03)
SE-SIS, Suture Strength Testing
- SIS 11 26 18-1974 Hardmetals. Determination of transverse rupture strength
- SIS SS IEC 370:1982 Test procedure for thermal endurance of insulating varnishes - Electric strength method
Professional Standard - Chemical Industry, Suture Strength Testing
- HG/T 3864-2006 Method for Determination of Interlaminar Adhesion Strength of V-belts
US-FCR, Suture Strength Testing
- FCR FED SSBA 1-1969 SHEAR STRENGTH OF BONDING AGENTS FOR BONDED CONSTRUCTION JOINTS IN CONCRETE, METHOD OF TEST AND TEST REQUIREMENTS FOR
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Suture Strength Testing
- GB/T 35367-2017 X-ray radiography technique and quality classification for titanium butt weld joints on submersible
- GB/T 35361-2017 Ultrasonic testing technique and quality classification for titanium butt weld joints on submersible
Professional Standard - Water Conservancy, Suture Strength Testing
- SL 581-2012 Ultrasonic testing method and quality classification for T-joint fillet welds and combination of butter weld and fillet weld of hydro steel structures
SAE - SAE International, Suture Strength Testing
- SAE AMS3656C-1978 Polytetrafluoroethylene Extrusions Normal Strength@ As Sintered@ Radiographically Inspected
Jilin Provincial Standard of the People's Republic of China, Suture Strength Testing
- DB22/T 2771-2017 Technical specification for non-destructive testing of concrete strength in highway engineering
Professional Standard - Ferrous Metallurgy, Suture Strength Testing
- YB 9248-1992 Technical specification for testing the compressive strength of hardened mortar by impact method