ZH
RU
ES

Environmental test reliability test equipment

Environmental test reliability test equipment, Total:498 items.

In the international standard classification, Environmental test reliability test equipment involves: Quality, Electrical engineering in general, Equipment for petroleum and natural gas industries, Telecontrol. Telemetering, Characteristics and design of machines, apparatus, equipment, Electrical and electronic testing, Telecommunication terminal equipment, Radiocommunications, Medical equipment, Test conditions and procedures in general, Electronic display devices, Photography, Environmental testing, Telecommunications in general, Audio, video and audiovisual engineering, Road vehicle systems, Telecommunication systems, Components for electrical equipment, Electronic component assemblies, Aircraft and space vehicles in general, Equipment for the metallurgical industry, Electronic components in general, Semiconductor devices, Integrated circuits. Microelectronics, Welding, brazing and soldering, Insulation, Shipbuilding and marine structures in general, Electricity. Magnetism. Electrical and magnetic measurements, Integrated Services Digital Network (ISDN), Vibrations, shock and vibration measurements, Analytical chemistry, On-board equipment and instruments, Aerospace electric equipment and systems, Alarm and warning systems, Surface treatment and coating, Applications of information technology, Information technology (IT) in general, TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING, Hospital equipment, Optoelectronics. Laser equipment, Power transmission and distribution networks, Protection against crime.

Korean Agency for Technology and Standards (KATS), Environmental test reliability test equipment

KS A IEC 60605-2-2002(2022) Equipment reliability testing－Part 2：Design of test cycles
KS A IEC 60605-2-2002(2017) Equipment reliability testing－Part 2：Design of test cycles
KS A IEC 60605-3-6-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation
KS A IEC 60605-3-5-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions －Section 5：Test cycle 5：Ground mobile equipment－Low degree of simulation
KS A IEC 60605-3-6-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation
KS A IEC 60605-3-5-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions －Section 5：Test cycle 5：Ground mobile equipment－Low degree of simulation
KS C 7112-2007 Organic light emitting diode(OLED) displays－Environmental reliability test methods
KS C 7112-2007(2017) Organic light emitting diode(OLED) displays－Environmental reliability test methods
KS A IEC 60605-3-4-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Section 4：Test cycle 4：Equipment for portable and non－stationary use－Low degree of simulation
KS A IEC 60605-3-1-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions－Indoor portable equipment－Law degree of simulation
KS A IEC 60605-3-1-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Indoor portable equipment－Law degree of simulation
KS A IEC 60605-3-4-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions－Section 4：Test cycle 4：Equipment for portable and non－stationary use－Low degree of simulation
KS W 0811-2004 Environmental test methods for aerospace equipment
KS A IEC 60605-3-3-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions Section 3：Test cycle 3：Equipment for stationary use in partially weatherprotected locations－Low degree of simulation
KS A IEC 60605-3-3-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions Section 3：Test cycle 3：Equipment for stationary use in partially weatherprotected locations－Low degree of simulation
KS W 0926-2014 Environmental tests for aircraft equipment - Insulation resistance and high voltage tests for electrical equipment
KS C 0236-1994(2014) Basic environmental testing procedures Test Ta:Soldering Solderability testing by the wetting balance method
KS W 0926-1997(2012) Environmental tests for aircraft equipment - Insulation resistance and high voltage tests for electrical equipment
KS W 0811-2004(2019) Environmental test methods for aerospace equipment
KS A IEC 60605-3-2-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Equipment for stationary use in weatherprotected location－High degree of simulation
KS C IEC PAS 62182:2003 Preconditioning of nonhermetic surface mount devices prior to reliability testing
KS A IEC 60605-3-1:2002 Equipment reliability testing－Part 3：Preferred test conditions－Indoor portable equipment－Law degree of simulation
KS A IEC 60605-3-2-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions－Equipment for stationary use in weatherprotected location－High degree of simulation
KS W 0924-1999 Environmental tests for aircraft equipment-Steady- state acceleration
KS W 0923-1997(2002) AIRBORNE EQUIPMENT - ENVIRONMENTAL CONDITIONS AND TEST PROCEDURES
KS C IEC 60068-3-3:2020 Environmental testing — Part 3-3: Guidance seismic test methods for equipments
KS W 0926-1997 Environmental tests for aircraft equipment - Insulation resistance and high voltage tests for electrical equipment
KS C IEC 62341-5-2007(2022) Organic light emitting diode(OLED) displays－Part 5：Environmental and mechanical reliability test methods
KS C IEC 62341-5-2007(2017) Organic light emitting diode(OLED) displays－Part 5：Environmental and mechanical reliability test methods
KS V 0818-2013 General rules for environmental test of marine electrical apparatus
KS C 0915-1995 Electrical apparatus for explosive gas atmospheres-Construction and verification test of flameproof enclosures of electrical apparatus
KS C 0243-2001(2011) Environmental testing Part 2：Tests－Test Ec： Drop and topple, primarily for equipment－type specimens
KS W ISO 2669:2007 Environmental tests for aircraft equipment-Steady-state acceleration
KS W ISO 2669:2018 Environmental tests for aircraft equipment－Steady-state acceleration
KS C IEC 60068-2-54-2015(2020) Environmental testing－Part 2－54：Tests－Test Ta：Solderability testing of electronic components by the wetting balance method
KS C IEC 60068-2-20:2021 Environmental testing — Part 2-20: Tests — Test T: Test methods for solderability and resistance to soldering heat of devices with leads
KS C IEC 60068-2-31:2014 Environmental testing — Part 2-31: Tests — Test Ec: Rough handling shocks, primarily for equipment-type specimens
KS C IEC 61747-5-3:2007 Liquid crystal display devices－Part 5－3：Glass strength and reliability measurement method
KS A IEC 60605-3-5:2002 Equipment reliability testing－Part 3：Preferred test conditions －Section 5：Test cycle 5：Ground mobile equipment－Low degree of simulation
KS A IEC 60605-3-6:2002 Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation
KS C 0287-2002(2022) Environmental test－Tests－Test Td：Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting device(SMD)
KS C IEC 60068-3-3:2001 Environmental testing-Part 3:Guidance seismic test methods for equipments
KS W 0925-2013 Environmental tests for aircraft equipment-Part 3.4 : Acoustic vibration
KS W ISO 7137:2018 Aircraft－Environmental conditions and test procedures for airborne equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Environmental test reliability test equipment

GB 5080.2 86 Equipment reliability testing Guidance for the design of test cycles
GB/T 5080.2-1986 Equipment reliability testing--Guidance for the design of test cycles
GB 5080.2-1986 Equipment reliability testing Guidance for the design of test cycles
GB/T 5080.1-1986 Equipment reliability testing--General requirements
GB 5080.5-1985 Verification test plan for success rate of equipment reliability test
GB/T 5080.5-1985 Equipment reliability testing--Compliance test plans for success ratio
GB/T 24262-2009 Enviromental tests and reliability for petroleum geophysical exploration instrument
GB 7288.1-1987 Equipment reliability testing－Preferred test conditions Indoor portable equipment－Low degree of simulation
GB/T 7288.1-1987 Equipment reliability testing--Preferred test conditions--Indoor portable equipment--Low degree of simulation
GB/T 5080.4-1985 Equipment reliability testing--Procedure for point estimates and confidence intervals from reliability determination tests(Exponential distribution)
GB 5080.4-1985 Point estimation and interval estimation method (exponential distribution) of equipment reliability test reliability determination test
GB/T 5080.6-1996 Equipment reliability testing--Tests for the validity of a constant failure rate assumption
GB/T 5080.2-2012 Reliability testing.Part 2:Design of test cycles
GB/T 5170.20-2022 Inspection methods for environmental testing equipments—Part 20：Water testing equipments
GB/T 15214-2008 Requirements and methods of reliability test for ultrasonic diagnostic equipment
GB 12322-1990 General application television equipment reliability test method
GB/T 12322-1990 Methods of reliability testing for universal CCTV systems
GB/T 5170.8-2017 Inspection methods for environmental testing equipments.Part 8:Salt mist testing equipments
GB/T 5170.2-2017 Test methods for environmental test equipment Part 2: Temperature test equipment
GB/T 13426-1992 Reliability requirements and test methods for digital communication equipment
GB/T 5170.9-2017 Inspection methods for environmental testing equipments.Part 9:Solar radiation testing equipments
GB/T 5170.11-2017 Inspection methods for environmental testing equipments.Part 11:Corrosive gas testing equipments
GB/T 5170.2-2008 Inspection methods for environmental testing equipments for electric and electronic products.Temperature testing equipments
GB/T 5170.5-2008 Inspection methods for environmental testing equipments for electric and electronic products.Damp heat testing equipments
GB/T 5170.8-2008 Inspection methods for environmental testing equipments for electric and electronic products.Salt mist testing equipments
GB/T 5170.18-2022 Inspection methods for environmental testing equipments—Part 18：Composite temperature/humidity cyclic testing equipments
GB 7288.2-1987 Equipment reliability testing－Preferred test conditions－Equipment for stationary use in weather protected locations－High degree of simulation
GB/T 7288.2-1987 Equipment reliability testing--Preferred test conditions--Equipment for stationary use in weather protected locations--High degree of simulation
GB/T 32710.7-2016 Safety requirements for environmental testing and conditioning equipment.Part 7:Climatic and environmental test chambers
GB/T 5170.10-2017 Inspection methods for environmental testing equipments.Part 10:Combined high and low temperature/low air pressure testing equipments
GB/T 5170.11-2008 Inspection methods for environmental testing equipments for electric and electronic products.Corrosive gas testing equipments
GB/T 5170.9-2008 Inspection methods for environmental testing equipments for electric and electronic products.Solar radiation testing equipments
GB/T 13543-1992 Environmental test methods for digital communication equipments
GB/T 15214-1994 Requirements and methods of reliability test for medical B mode ultrasonic diagnostic equipment
GB/T 5170.10-2008 Inspection methods for environmental testing equipments for electric and electronic products.Combined high and low temperature/low air pressure testing equipments
GB 5080.7-1986 The verification test plan of failure rate and mean time between failures under the assumption of constant failure rate in equipment reliability test
GB/T 5080.7-1986 Equipment reliability testing--Compliance test plans for failure rate and mean time between failures assuming constant failure rate
GB/T 5170.20-1990 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Water testing equipments
GB/T 5170.20-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Water testing equipments
GB/T 5170.2-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Temperature testing equipments
GB/T 5170.8-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Salt mist testing equipments
GB/T 5170.5-1996 Inspection on methods for basic parameters of environmental testing equipments for electric and electronic products--Damp heat testing equipments
GB/T 5170.1-2008 Inspection methods for environmental testing equipments for electric and electronic products.Genernal
GB/T 14710-1993 The environmental requirements and test methods for medical electrical equipment
GB/T 2423.32-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Ta:Solderability test by the wetting balance method
GB/T 5170.18-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Composite temperature/humidity cyclic testing equipments
GB/T 5170.18-1987 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Composite temperature/humidity cyclic testing equipments
GB/T 5170.9-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Solar radiation testing equipments
GB/T 5170.11-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Corrosive gas testing equipments
GB/T 15211-2013 Security alarm equipments.Environmental adaptability requirements and test methods
GB/T 2423.9-2001 Environmental testing for electric and electronic products Part 2: Test methods Test Cb: Damp heat,steady state,primarily for equipment
GB/T 18328.1-2009 Vibration generating machines-Guidance for selection-Part 1: Equipment for environmental testing

Professional Standard - Agriculture, Environmental test reliability test equipment

GB 5080.1-1986 General Requirements for Equipment Reliability Test
SC/T 7002.14-1992 Environmental test conditions and methods for marine electronic equipment-electromagnetic compatibility

Professional Standard - Petroleum, Environmental test reliability test equipment

SY/T 6541-2003 Environmental test and reliability for geophysical exploration instrument
SY/T 5099-2007 Environmental test and reliability requirements for petroleum well-logging instruments
SY 5099-2007 Environmental Test and Reliability Requirements for Petroleum Logging Instruments

Professional Standard - Electron, Environmental test reliability test equipment

SJ 2584-1985 Qualification test and acception test for reliability of radar equipment
SJ 2810-1987 Test methods of reliability for carrier communication equipment
SJ/Z 9110-1987 Equipment reliability testing - Part 4: Procedures for determining point estimates and confidence limits in equipment reliability testing
SJ/T 10386-1993 Compliance test method of reliability target for electronic industry special equipment
SJ/T 11325-2006 Reliability test methods for digital television receiver and display equipment
SJ/T 10654-1995 General requirements of reliability test for short wave single-sideband communication equipment
SJ 2940-1988 Reliability test method for electronic equipment of satellite communications ground stations
SJ 20375-1993 General specification for military electronic test equipment.Requirements and methods for reliability test
SJ/Z 2312-1983 Methods of measurement for climatic environmental test equipnent for electronic industry
SJ/Z 9001.32-1987 Basic environmental testing procedures--Part 2: Tests--Test Ta: Solderability testing by the wetting balance method
SJ 2325-1983 Environmental test conditions and test procedures for land microwave communication equipment
SJ 2847-1988 Test method of reliability for equipment of ground radio-relay system (exponential distribution)
SJ 2311-1983 Generic specification for environmental test equipment for electronic industry

Group Standards of the People's Republic of China, Environmental test reliability test equipment

T/CSTM 00987-2023 Design guideline of environment reliability test for communication materials
T/CSBME 024-2021 Reliability test methods for ultrasonic diagnostic equipment
T/CECA 38-2020 Reliability test specification of fixed inductors for electronic equipment
T/ZMDS 10007-2019 Reliability Testing and Assessment for Medical Electron Linear Accelerator Part 3: Method of Reliability Enhancement Testing for Electrical Equipment
T/ZPP 042-2023 Overall technical conditions of electronic component reliability test equipment
T/CIS 03002.1-2020 Reliability of electric system in instrument or equipment -- Enhance test method
T/CSEE 0035-2017 Environmental adaptability requirements and test methods for electric vehicle charging equipment

Military Standard of the People's Republic of China-General Armament Department, Environmental test reliability test equipment

GJB 573.18-1988 Fuze environment and performance test method Sequential vibration-loading and unloading reliability test
GJB 150.13-1986 Environmental test methods for military equipment Explosive atmosphere testing
GJB 150.9-1986 Laboratory environmental test methods for military materiel.Part 9:Damp heat test
GJB 150.12-1986 Environmental test methods for military equipment Sand and Dust Test
GJB 150.10-1986 Environmental test methods for military equipment Mold testing
GJB 4.9-1983 Environmental testing of ship electronic equipment and impact testing
GJB 150.16-1986 Environmental test methods for military equipment Vibration test
GJB 150.18-1986 Environmental testing methods for military equipment Impact testing
GJB 150.17-1986 Environmental test methods for military equipment Noise test
GJB 4.7-1983 Environmental testing of ship electronic equipment and vibration testing
GJB 150.8-1986 Environmental test methods for military equipment rain test
GJB 4.8-1983 Environmental test of ship electronic equipment, vibration test
GJB 4.11-1983 Environmental testing of ship electronic equipment Salt spray test
GJB 150.21-1987 Environmental test methods for military equipment Wind pressure test
GJB 4.10-1983 Environmental testing of ship electronic equipment Mold testing
GJB 150.3-1986 Environmental test methods for military equipment High temperature test
GJB 150.14-1986 Environmental test methods for military equipment - immersion test
GJB 473.8-1988 Reliability test of boat bridge equipment design finalization test procedures
GJB 150.15-1986 Environmental test methods for military equipment Acceleration test
GJB 367.3-1987 Reliability qualification test and acceptance test method for general technical conditions of military communication equipment
GJB 4.13-1983 Marine electronic equipment environmental test shell waterproof test
GJB 4.6-1983 Environmental test of ship electronic equipment, alternating damp heat test
GJB 150.5-1986 Environmental test methods for military equipment Temperature shock test
GJB 150.20-1986 Environmental test methods for military equipment Aircraft gun vibration test
GJB 150.7-1986 Environmental test methods for military equipment Solar radiation test
GJB 150.22-1987 Military Equipment Environmental Test Methods Ice Accumulation/Freezing Rain Test
GJB 4.12-1983 Environmental testing of ship electronic equipment Solar radiation testing
GJB 4622-1993*GJBz 20128.8-1993 Reliability test of the design finalization test procedures for the four-fold belt type pontoon bridge
GJB 522.5-1988 Reliability test method for technical conditions of meteorological information receiving equipment
GJB 81.18-1985 Reliability test method of military bulldozer design test procedures
GJB 150.2-1986 Environmental test methods for military equipment Low pressure (altitude) test
GJB 150.23-1991 Military Equipment Environmental Test Methods Tilt and Swing Test
GJB 4.1-1983 General principles for environmental testing of ship electronic equipment
GJB 150.1-1986 General Principles of Environmental Test Methods for Military Equipment
GJB 796.8-1990 Reliability test of design and finalization test procedures for military fixed bridge beam equipment
GJB 150.25-1992 Environmental test methods for military equipment vibration-noise-temperature test
GJB 8108-2013 Test procedure for running reliability of armoured-vehicle-chassis engineering equipment
GJB 150.24-1992 Environmental test methods for military equipment Temperature-humidity-vibration-height test
GJB 150.28-2009 Laboratory environmental test methods for military materiel.Part 28:Acidic atmosphere test
GJB 4110.17-2000 General test procedures for military wheeled construction machinery design and finalization Reliability test methods
GJB 150.13A-2009 Laboratory environmental test methods for military materiel.Part 13:Explosive atmosphere test
GJB 4111.25-2000 General test procedures for military crawler construction machinery design and finalization Reliability test methods

International Electrotechnical Commission (IEC), Environmental test reliability test equipment

IEC 60605-2:1994 Equipment reliability testing - Part 2: Design of test cycles
IEC 60605-3-5:1996 Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation
IEC 60605-3-6:1996 Equipment reliability testing - Part 3: Preferred test conditions - Section 6: Test cycle 6: Outdoor transportable equipment - Low degree of simulation
IEC 60605-4:1986 Equipment reliability testing. Part 4 : Procedures for determining point estimates and confidence limits from equipment reliability determination tests
IEC 60605-1:1978 Equipment reliability testing. Part 1 : General requirements
IEC 60605-4/AMD1:1989 Equipment reliability testing; part 4: procedures for determining point estimates and confidence limits for equipment reliability determination tests; amendment 1 to IEC 60605-4:1986
IEC 60605-3-4:1992 Equipment reliability testing; part 3: preferred test conditions; section 4: test cycle 4: equipment for portable and non-stationary use; low degree of simulation
IEC 60605-3-1:1986 Equipment reliability testing. Part 3 : Preferred test conditions. Indoor portable equipment - Low degree of simulation
IEC 60605-1/AMD1:1982 Equipment reliability testing. Part 1 : General requirements
IEC 60749-30:2011 Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
IEC 60605-6:1986 Equipment reliability testing. Part 6 : Tests for the validity of a constant failure rate assumption
IEC 60605-3-3:1992 Equipment reliability testing; part 3: preferred test conditions; section 3: test cycle 3: equipment for stationary use in partially weatherprotected locations; low degree of simulation
IEC 60068-2-54:1985 Environmental testing. Part 2: Tests. Test TA: Soldering. Solderability testing by the wetting balance method
IEC 60605-6/COR1:2000 Equipment reliability testing - Part 6: Tests for the validity of the constant failure rate or constant failure intensity assumptions
IEC 61124:1997 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
IEC 60068-3-3:1991 Environmental testing; part 3: guidance; seismic test methods for equipments
IEC 60068-2-31:2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
IEC 60068-2-20:2008 Environmental testing - Part 2: Tests - Test T: Test methods for soldeability and resistance to soldering heat of devices with leads
IEC 60068-2-20:2021 Environmental testing - Part 2-20: Tests - Tests Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads
IEC 61747-5-3:2009 Liquid crystal display devices - Part 5-3: Environmental, endurance and mechanical test methods - Glass strength and reliability
IEC 60605-3-2:1986 Equipment reliability testing. Part 3 : Preferred test conditions. Equipment for stationary use in weatherprotected locations - High degree of simulation
IEC 60068-2-56:1988 Environmental testing; part 2: tests; test Cb: damp heat, steady state, primarily for equipment

RU-GOST R, Environmental test reliability test equipment

GOST R 27.605-2013 Reliability in technique. Maintainability of equipment. Diagnostic testing
GOST 21317-1987 Household radioelectronic equipment. Reliability testing procedures
GOST R IEC 60068-2-20-2015 Environmental testing. Part 2-20. Tests. Test T. Test methods for solderability and resistance to soldering heat of devices with leads

Professional Standard - Aerospace, Environmental test reliability test equipment

QJ 2631-1994 Comprehensive Environmental Reliability Test Method for Missile System Level
QJ 2653-1994 Reliability Verification Test Method for Ground Equipment of Ground-to-Surface Strategic Missile
QJ 1986-1990 Environmental Test Equipment Manual for Aerospace Products
QJ 1184.1-1987 Coastal Defense Missile Environmental Specification High Temperature Test of Missile Equipment
QJ 1184.2-1987 Low-temperature test of equipment on board the coastal defense missile environment specification

RO-ASRO, Environmental test reliability test equipment

STAS R 12007/4-1989 Equipment reliability testing PROCEDURES FOR DETERMINING POINT ESTIMATES AND CONFI- DENCE LIMITS FROM EQUIPMENT RELIABILITY DETERMINATION TESTS
STAS R 12007/3.2-1989 Equipment reliability testing PREFERRED TEST CONDITIONS Equipment for stationary use in weatherprotected locations
STAS 8393/10-1970 Basic environmental testing procedures for electronic equipment TEST Hb: STORAGE

Professional Standard - Post and Telecommunication, Environmental test reliability test equipment

YD/T 282-2000 General reliability test methods for communication equipment
YD/T 612-1993 Reliability index and test method of facsimile communication equipment
YD/T 642-1993 Reliability indicator and test method of carrier communication equipment
YD/T 2379.4-2011 Environmental test requirements and test methods for telecommunication equipment .Part 4:terminal equipment
YD/T 2379.6-2012 Environmental test requirements and test methods for telecommunications equipment Part 6: Transportation
YD/T 2379.5-2013 Environmental test requirements and test methods for telecommunications equipment Part 5: Storage
YD/T 2379.2-2011 Environmental test requirements and test methods for telecommunications equipment.Part 2:telecommunication equipment in central room

European Committee for Electrotechnical Standardization（CENELEC）, Environmental test reliability test equipment

EN 62059-31-1:2008 Electricity metering equipment - Dependability - Part 31-1: Accelerated reliability testing - Elevated temperature and humidity
HD 323.2.58 S1-1992 Environmental Testing - Part 2: Tests Test Td: Solderability, Resistance to Dissolution of Metallization and to Soldering Heat of Surface Mounting Devices (SMD)
HD 323.3.3 S1-1991 Environmental Testing Part 3: Guidance - Seismic Test Methods for Equipments
HD 323.2.54-1987 Basic Environmental Testing Procedures Part 2: Tests Test TA: Soldering, Solderability Testing by the Wetting Balance Method
EN 61747-5-3:2010 Liquid crystal display devices - Part 5-3: Environmental, endurance and mechanical test methods - Glass strength and reliability
HD 323.2.56 S1-1990 Basic Environmental Testing Procedures Part 2: Tests Test Cb; Damp Heat, Steady State, Primarily for Equipment

British Standards Institution (BSI), Environmental test reliability test equipment

BS 5760-10.2:1995 Reliability of systems, equipment and components. Guide to reliability testing. Design of test cycles
BS 5760-10.5:1993 Reliability of systems, equipment and components - Guide to reliability testing - Compliance test plans for success ratio
BS 5760 Sec.10.5:1993 Reliability of systems, equipment and components. Guide to reliability testing. Compliance test plans for success ratio
BS EN 60068-2-58:2004 Environmental testing - Tests - Test Td - Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS EN 60068-2-58:2015 Environmental testing. Tests. Test Td. Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS 5760 Sec.10.3:1993 Reliability of systems, equipment and components. Guide to reliability testing. Compliance test procedures for steady-state availability
BS EN 60068-3-3:1991 Environmental testing - Guidance - Environmental testing - Miscellaneous - Guide to seismic test methods for equipment
BS EN 61747-5-3:2010 Liquid crystal display devices - Environmental, endurance and mechanical test methods - Glass strength and reliability
BS EN 60068-2-31:2008 Environmental testing –– Part 2-31: Tests – Test Ec: Rough handling shocks, primarily for equipment-type specimens
BS IEC 60605-6:2010 Equipment reliability testing. Tests for the validity and estimation of the constant failure rate and constant failure intensity
BS IEC 60605-6:2007 Equipment reliability testing - Tests for the validity and estimation of the constant failure rate and constant failure intensity
BS 2011-2.1Td:1990 Environmental testing. Tests. Test Td. Solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS IEC 62908-13-10:2016 Touch and interactive displays. Reliability test methods of touch displays. Environmental durability test methods
BS 5760-13.5:1996 Reliability of systems, equipment and components - Guide to reliability test conditions for consumer equipment - Ground mobile equipment - Low degree of simulation
BS 5760-13.1:1993 Reliability of systems, equipment and components - Guide to reliability test conditions for consumer equipment - Conditions providing a low degree of simulation for indoor portable equipment
BS EN 60068-2-31:1993 Environmental testing - Test methods - Test Ec - Drop and topple, primarily for equipment-type specimens
BS ISO 10813-1:2023 Vibration generating machines. Guidance for selection - Equipment for environmental testing
BS EN 60068-2-69:2007 Environmental testing - Tests - Test Te - Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method
BS EN IEC 60068-3-3:2019 Environmental testing - Supporting documentation and guidance. Seismic test methods for equipment
3G 229-1993 Schedule for environmental conditions and test procedures for airborne equipment

Professional Standard - Machinery, Environmental test reliability test equipment

JB/T 11556-2013 Reliability test method for blasting (spraying) shot cleaning equipment
JB/T 50118-1998 Test method for shot blasting cleaning equipment (only for internal use)
JB/T 7439.3-1994 Terminology relating to laboratory instruments - Climatic and environmental test equipment
JB/T 9512-1999 Climate environmental testing equipment and cabinet - Determination of sound power level of noise emitted

Association Francaise de Normalisation, Environmental test reliability test equipment

NF C20-325:1985 Equipment reliability testing Part 5:Compliance test plans for success ratio
NF Z87-019-26*NF ETS 300019-2-6:1995 Equipment engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 2-6 : specification of environmental tests. Ship environments.
NF Z87-019-22:1995 Equipment engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 2-2 : specification of environmental tests. Transport.
NF Z87-019-25:1995 Equipment engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 2-5 : specification of environmental tests. Ground vehicle installations.
NF X10-812:2013 Marine environment - Underwater equipment - Environment tests and recommendations
NF Z87-019-20:1995 Equipement engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 2-0 : specification of environmental tests. Introduction.
NF Z87-019-2-0*NF EN 300019-2-0:2003 Environnental Engineering (EE) - Environmental conditions and environmental tests for telecommunication equipment - Part 2-0 : Specification of environmental tests - Introduction (V2.1.2)
NF Z87-019-27:1995 Equipment engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 2-7 : specification of environmental tests. Portable and non-stationary use.
NF Z87-019-2-2:2013 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2 : specification of environmental tests - Transportation (V2.3.1)
NF C20-700-2-20*NF EN 60068-2-20:2013 Environmental testing - Part 2-20 : tests - Test T : test methods for solderability and resistance to soldering heat of devices with leads
NF Z87-019-21:1995 Equipement engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 2-1 : specification of environmental tests. Storage.
NF C20-420*NF EN 60068-3-3:1994 Environmental testing. Part 3 : guidance seismic test methods for equipments.
NF Z87-019-2-4:2013 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-4 : specification of environmental tests - Stationary use at non-weatherprotected locations (V2.3.1)
NF C20-735:1987 Basic environmental testing procedures. Test methods. Test Fda : randim vibration wide band. Reproducibility.
NF Z87-019-16:1995 Equipement engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 1-6 : classification of environmental conditions. Ship environments.
NF C20-737:1987 Basic environmental testing procedures. Test methods. Test Fdc : random vibration wide band. Reproductibility low.
NF X10-811:1995 Marine environment-Oceanographic instrumentation-Environmental tests and recommendations for equipments in marine atmosphere
NF Z87-019-2-8:2020 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-8 : specification of environmental tests - Stationary use at underground locations (V2.2.1)
NF C20-736:1987 Basic environmental testing procedures. Test methods. Test Fdb : random vibration wide band. Reproducibility medium.
NF Z87-019-11:1995 Equipment engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 1-1 : classification of environmental conditions. Storage.
NF Z87-019-2-7*NF EN 300019-2-7:2006 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-7 : specification of environmental tests - Portable and non-stationary use (V3.0.1)
NF C93-547-5-3*NF EN 61747-5-3:2010 Liquid crystal display devices - Part 5-3 : environmental, endurance and mechanical test methods - Glass strength and reliability
NF C20-700-2-20*NF EN IEC 60068-2-20:2021 Environmental testing - Part 2-20 : tests - Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads

VN-TCVN, Environmental test reliability test equipment

TCVN 5413-1991 Household radioelectronic apparatus.Reliability indices and reliability test methods

German Institute for Standardization, Environmental test reliability test equipment

DIN IEC 60605-3-4:1993 Equipment reliability testing; preferred test conditions; equipment for portable and non-stationary use; low degree of simulation; identical with IEC 60605-3-4:1992
DIN EN 300019-2-6:2004 Equipment Engineering (EE) - Evironmental conditions and environmental tests for telecommunications equipment - Part 2-6: Specification of environmental tests; Ship environments (Endorsement of the English version EN 300019-2-6 V3.0.0 (2002-12) as German
DIN IEC 60068-3-3:1993 Environmental testing; seismic test methods for equipments; guidance; identical with IEC 60068-3-3:1991
DIN EN 300019-2-1:2004 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-1: Specification of environmental tests; Storage (Endorsement of the English version EN 300019-2-1 V2.1.2 (2000-09) as German standard)
DIN EN 300019-2-0:2004 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-0: Specification of environmental tests; Introduction (Endorsement of the English version EN 300019-2-0 V2.1.2 (2003-05) as German stan
DIN EN 300019-2-8:2000 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-8: Specification of environmental tests; stationary use at underground locations (Endorsement of the English version EN 300019-2-8 V 2.
DIN EN 300019-2-7:2004 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-7: Specification of environmental tests; Portable and non-stationary use (Endorsement of the English version EN 300019-2-7 V3.0.0 (2002
DIN EN 300019-2-1:2016 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-1: Specification of environmental tests; Storage (Endorsement of the English version EN 300 019-2-1 V2.2.1 (2014-10) as German stan
DIN EN 300019-2-5:2004 Equipment Engineering (EE) - Evironmental conditions and environmental tests for telecommunications equipment - Part 2-5: Specification of environmental tests; Ground vehicle installations (Endorsement of the English version EN 300019-2-5 V3.0.0 (2002-12)
DIN EN 60068-2-58:2005 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (IEC 60068-2-58:2004); German version EN 60068-2-58:2004 + Corrigendum 2
DIN EN 300019-2-4:2004 Equipment Engineering (EE) - Evironmental conditions and environmental tests for telecommunications equipment - Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations (Endorsement of the English version EN 300019-
DIN EN 300019-2-3:2004 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-3: Specification of environmental tests; Stationary use at weather protected locations (Endorsement of the English version EN 300019-2-
DIN IEC 60605-3-1:1988 Electrical engineering; equipment reliability testing; preferred test conditions; indoor portable equipment; low degree of simulation; identical with IEC 60605-3-1:1986
DIN EN 60068-2-69:2007 Environmental testing - Part 2-69: Tests - Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method (IEC 60068-2-69:2007); German version EN 60068-2-69:2007
DIN EN 50130-5:2012 Alarm systems - Part 5: Environmental test methods; German version EN 50130-5:2011
DIN EN 60068-2-31:2009 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens (IEC 60068-2-31:2008); German version EN 60068-2-31:2008
DIN EN 300019-1-6:2004 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-6: Classification of environmental conditions; Ship environments (Endorsement of the English version EN 300019-1-6 V2.1.4 (2003-04) as
DIN ETS 300019-1-4/A1:1998 Equipment engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-4: Classification of environmental conditions; stationary use at non-weatherprotected locations; Amendment A1; English version ETS 3000
DIN EN 60068-2-20:2009 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads (IEC 60068-2-20:2008); German version EN 60068-2-20:2008
DIN EN 300019-1-0:2004 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-0: Classification of environmental conditions; Introduction (Endorsement of the English version EN 300019-1-0 V2.1.2 (2003-05) as Germa
DIN EN 300019-1-1:2004 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-1: Classification of environmental conditions; Storage (Endorsement of the English version EN 300019-1-1 V2.1.4 (2003-04) as German sta
DIN EN 300019-1-2:2004 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-2: Classification of environmental conditions; Transportation (Endorsement of the English version EN 300019-1-2 V2.1.4 (2003-04) as Ger

Danish Standards Foundation, Environmental test reliability test equipment

DS/ETS 300019-2-6:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-6:Specification of environmental tests - Ship environments
DS/ETS 300019-2-0:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-0:Specification of environmental tests - Introduction
DS/ETS 300019-2-1:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-1:Specification of environmental tests - Storage
DS/ETS 300019-2-2:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2:Specification of environmental tests - Transportation
DS/ETS 300019-2-5:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-5:Specification of environmental tests - Ground vehicle installations
DS/EN 300019-2-6 V3.0.0:2004 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments
DS/EN 300019-2-1 V2.1.2:2001 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage
DS/ETS 300019-2-2 V2.1.2:2003 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
DS/ETS 300019-2-7:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-7:Specification of environmental tests - Portable and non-stationary use
DS/EN 300019-2-0 V2.1.2:2005 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-0: Specification of environmental tests; Introduction
DS/EN 300019-2-1 V2.2.1:2012 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
DS/EN 300 019-2-2 V2.3.1:2013 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
DS/ETS 300019-2-3:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-3:Specification of environmental tests - Stationary use at weatherprotected locations
DS/ETS 300019-2-4:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-4:Specification of environmental tests - Stationary use at non-weatherprotected locations
DS/ETS 300019-1-6:1993 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment. Part 1-6: Classification of environmental conditions Ship environments
DS/IEC 68-2-54:1986 Basic environmental testing procedures. Part 2: Tests. Test Ta: Soldering. Solderability testing by the wetting balance method
DS/IEC 68-2-37:1985 Basic environmental testing procedures - Part 2: Tests - Test Fdc: Random vibration wide band - Reproducibility low
DS/EN 61747-5-3:2010 Liquid crystal display devices - Part 5-3: Environmental, endurance and mechanical test methods - Glass strength and reliability
DS/EN 300 019-2-3 V2.3.1:2013 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-3: Specification of environmsuppental tests; Stationary use at weatherprotected locations
DS/IEC 68-2-56:1990 Environmental testing. Part 2: Tests. Test Cb: Damp heat, steady state, primarily for equipment
DS/ETS 300019-1-1:1993 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment. Part 1-1: Classification of environmental conditions. Storage
DS/ETS 300019-1-2:1993 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment. Part 1-2: Classification of environmental conditions. Transportation
DS/ETS 300019-1-0:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-0:Classification of environmental conditions - Introduction

American National Standards Institute （ANSI), Environmental test reliability test equipment

ANSI PH3.713-1985 Photography (Equipment) - Environmental Testing
ANSI/ASA S2.62-2009 Shock Test Requirements for Equipment in a Rugged Shock Environment

IN-BIS, Environmental test reliability test equipment

AENOR, Environmental test reliability test equipment

UNE 20608-2:1999 EQUIPMENT RELIABILITY TESTING. PART 2: DESIGN OF TEST CYCLES.
UNE-EN 60068-2-31:2009 Environmental testing -- Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
UNE-EN 60068-3-3:1994 ENVIRONMENTAL TESTING. PART 3: GUIDANCE. SEISMIC TEST METHODS FOR EQUIPMENTS.

Guangdong Provincial Standard of the People's Republic of China, Environmental test reliability test equipment

DB44/T 1769-2015 Reliability test methods for electronic equipment used in electric vehicles
DB44/T 1758-2015 Reliability strengthening test method for electric vehicle electronic equipment
DB44/T 1768-2015 Environmental adaptability test method for electronic equipment used in electric vehicles
DB44/T 1345-2014 Reliability test method for vehicle-mounted GPS/Beidou dual-mode satellite positioning and navigation terminal equipment

ES-AENOR, Environmental test reliability test equipment

未注明发布机构, Environmental test reliability test equipment

GJB 150.4-1986 Environmental test methods for military equipment Low temperature test
GJB 4.2-1983 Environmental testing of ship electronic equipment High temperature testing
GJB 4.3-1983 Environmental testing of ship electronic equipment Low temperature testing
GJB 150.11-1986 Environmental test methods for military equipment Salt spray test
GJB 4.4-1983 Environmental testing of ship electronic equipment Low temperature storage testing
GJB 4.5-1983 Environmental test of ship electronic equipment Constant humidity and heat test
GJB 150.6-1986 Environmental test methods for military equipment temperature-altitude test
BS ISO 2678:1985(2022) Environmental tests for aircraft equipment — Insulation resistance and high voltage tests for electrical equipment
GJB 150.19-1986 Environmental test methods for military equipment temperature-humidity-altitude test

Lithuanian Standards Office , Environmental test reliability test equipment

LST ETS 300 019-2-6 Leid.1-2005 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments
LST EN 300 019-2-6 V3.0.0-2005 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments
LST EN 300 019-2-6 V2.1.2-2005 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments
LST EN 300 019-2-1 V2.1.2-2005 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage
LST ETS 300 019-2-5 Leid.1-2007 Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-5: Specification of environmental tests;Ground vehicle installations
LST EN 300 019-2-2 V2.1.2-2000 Equipment Engineering (EE). Environmental conditions and environmental tests for telecommunications equipment. Part 2-2: Specification of environmental tests. Transportation
LST ETS 300 019-2-2 Leid.1-2005 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
LST ETS 300 019-2-0 Leid.1-2005 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-0: Specification of environmental tests; Introduction
LST EN 300 019-2-0 V2.1.2-2004 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-0: Specification of environmental tests; Introduction
LST EN 300 019-2-2 V2.2.1-2012 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
LST ETS 300 019-1-1 Leid.1-2006 Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 1-1: Classification of environmental conditions;
LST ETSI EN 300 019-2-5 V3.1.1-2021 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2: Specification of environmental tests; Sub-part 5: Ground vehicle installations
LST ETS 300 019-1-0 Leid.1-2005 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-0: Classification of environmental conditions; Introduction
LST ETS 300 019-1-2 Leid.1-2005 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-2: Classification of environmental conditions; Transportation

Standard Association of Australia （SAA）, Environmental test reliability test equipment

AS 60068.2.21:2004 Environmental testing - Tests - Test U: Robustness of terminations and integral mounting devices
AS 60068.2.58:2004 Environmental testing - Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

ETSI - European Telecommunications Standards Institute, Environmental test reliability test equipment

PRETS 300 019-2-0-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-0: Specification of Environmental Tests Introduction
PRETS 300 019-2-2-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests Transportation
ETS 300 019- 2-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-0: Specification of Environmental Tests Introduction
PRETS 300 019-2-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-0: Specification of Environmental Tests Introduction
ETS 300 019- 2-2-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests Transportation
ETS 300 019- 2-1-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-1: Specification of Environmental Tests Storage
PRETS 300 019-2-1-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-1: Specification of Environmental Tests Storage
ETSI EN 300 019-2-1:2014 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage (V2.2.1)
ETSI EN 300 019-2-1:2017 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage (V2.2.8)
ETSI EN 300 019-2-2:2011 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation (V2.2.1)
PRETS 300 019-B-1990 Equipment Engineering Environmental Conditions and Environmental Tests for Telecommunications Equipment Part B - Classification of Environmental Conditions (T/TR 02-12)
ETS 300 019-1-6-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-6: Classification of Environmental Conditions Ship Environments
PRETS 300 019-1-6-1991 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-6: Classification of Environmental Conditions Ship Environments
ETSI EN 300 019-2-0:2003 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-0 Specification of environmental tests; Introduction (V2.1.2)
ETSI EN 300 019-2-2:2017 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation (V2.3.6)
ETSI EN 300 019-2-2:2012 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation (V2.3.1)
ETSI EN 300 019-2-2:2013 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation (V2.3.1)
TR 103 538-2019 Environmental Engineering (EE); Analysis of test method and test severity for mechanical test of equipment installed on poles/towers (V1.1.1)
PRETS 300 019-1-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-0: Classification of Environmental Conditions Introduction
PRETS 300 019-1-2-1991 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-2: Classification of Environmental Conditions Transportation
PRETS 300 019-1-0-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-0: Classification of Environmental Conditions Introduction
ETS 300 019- 1-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-0: Classification of Environmental Conditions Introduction
ETS 300 019-1-2-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-2: Classification of Environmental Conditions Transportation
ETS 300 019-1-1-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-1: Classification of Environmental Conditions Storage
PRETS 300 019-1-1-1991 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-1: Classification of Environmental Conditions Storage

Professional Standard - Aviation, Environmental test reliability test equipment

HB 6167.14-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 14: Fire flammability test
HB 6167.22-1989 Environmental conditions and test methods for radio frequency susceptibility test of airborne equipment of civil aircraft
HB 6167.9-1989 Environmental conditions and test methods for airborne equipment of civil aircraft Fluid sensitivity test
HB 6167.15-1989 Environmental conditions and test methods for airborne equipment of civil aircraft
HB 6167.13-1992 Environmental conditions and test methods for civil aircraft airborne equipment icing test
HB 6167.12-1989 Environmental conditions and test methods for civil aircraft airborne equipment Salt spray test
HB 6167.10-1989 Environmental conditions and test methods for airborne equipment of civil aircraft Sand and dust test
HB 6167.4-1989 Environmental conditions and test methods for airborne equipment of civil aircraft Damp heat test
HB 6167.6-1989 Vibration test of civil aircraft airborne equipment environmental conditions and test methods
HB 6167.7-1989 Environmental conditions and test methods for airborne equipment of civil aircraft Explosion test
HB 6167.8-1989 Environmental conditions and test methods for airborne equipment of civil aircraft Waterproof test
HB 6167.11-1989 Environmental conditions and test methods for airborne equipment of civil aircraft mold test
HB 6167.21-1989 Environmental conditions and test methods for airborne equipment of civil aircraft Sensitivity test for induction signals
HB 5830.1-1984 Airborne Equipment Environmental Conditions and General Rules of Test Methods
HB 5830.11-1986 Airborne equipment environmental conditions and test methods damp heat
HB 5830.13-1986 Airborne Equipment Environmental Conditions and Test Methods Mold
HB 5830.2-1982 Airborne equipment environmental conditions and test method impact
HB 5830.3-1982 Airborne Equipment Environmental Conditions and Test Methods Collision
HB 5830.5-1984 Airborne Equipment Environmental Conditions and Test Method Vibration
HB 5830.9-1984 Airborne Equipment Environmental Conditions and Test Methods Low Temperature
HB 5830.8-1984 Airborne Equipment Environmental Conditions and Test Methods High Temperature
HB 5830.12-1986 Airborne Equipment Environmental Conditions and Test Methods Salt Spray
HB 6167.17-1989 Environmental conditions and test methods for civil aircraft airborne equipment Magnetic influence test
HB 6783.11-1993 Military airborne equipment climate environment test chamber (room) verification method Explosive atmosphere test chamber (room)
HB 6167.9-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 9: Fluids susceptibility test
HB 6167.22-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 22: Radio frequency susceptibility (radiated and conducted) test
HB 6167.18-1989 Environmental conditions and test methods for civil aircraft airborne equipment power input test
HB 6167.3-1989 Environmental conditions and test methods for airborne equipment of civil aircraft Temperature change test
HB 6167.19-1989 Environmental conditions and test methods for airborne equipment of civil aircraft Voltage spike test

国家市场监督管理总局、中国国家标准化管理委员会, Environmental test reliability test equipment

GB/T 38341-2019 Micro-electromechanical system technology—The reliability test methods of MEMS in integrated environments
GB/T 5170.19-2018 Inspection methods for environmental testing equipments—Part 19:Combined temperature vibration(sinusoidal) testing equipment
GB/T 39555-2020 Intelligent laboratory—Instruments and equipment—Data interface of climatic and environmental testing equipment
GB/T 5170.16-2018 Inspection methods for environmental testing equipments—Part 16：Centrifugal machines for constant acceleration test

Japanese Industrial Standards Committee (JISC), Environmental test reliability test equipment

JIS C 0054:1994 Environmental testing Part 2: Tests -- Test Td: Solderability, resistance to dissolution of metallization and to soldering heat of Surface Mounting Devices (SMD)
JIS C 0054:2002 Environmental testing -- Part 2: Tests -- Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
JIS C 0051:2002 Environmental testing -- Part 2-21: Tests -- Test U: Robustness of termination and integral mounting devices
JIS C 60068-3-3:2000 Environmental testing -- Part 3: Guidance Seismic test method for equipments
JIS C 0055 ERRATUM 1:2001 Environmental testing -- Part 3: Guidance Seismic test method for equipments (Erratum 1)
JIS C 60068-2-56:1996 Environmental testing Part 2: Tests. Test Cb: Damp heat, steady state, primarily for equipment
JIS C 60068-2-54:1996 Environmental testing Part 2: tests. Test Ta: Soldering. Solderability testing by the wetting balance method
JIS C 0053:1996 Environmental testing Part 2: tests. Test Ta: Soldering. Solderability testing by the wetting balance method
JIS C 0055:2000 Environmental testing -- Part 3: Guidance Seismic test method for equipments
JIS W 0801:1983 Environmental test methods for aerospace equipment
JIS W 0812:2004 Airborne equipment -- Environmental conditions and test procedures
JIS W 0823:1994 Environmental tests for aircraft equipment -- Insulation resistance and high voltage tests for electrical equipment
JIS C 0032:1996 Environmental testing Part 2: Tests. Test Cb: Damp heat, steady state, primarily for equipment
JIS W 7002:1981 Environmental conditions and test procedures for airborne equipment and instruments
JIS C 60068-2-31:1995 Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens
JIS W 7004:1981 Testing, environmental, airborne electronic and associated equipment
JIS C 60068-3-3:2021 Environmental testing -- Part 3-3: Supporting documentation and guidance -- Seismic test methods for equipment
JIS C 60068-2-54:2009 Environmental testing -- Part 2-54: Tests -- Test Ta: Solderability testing of electronic components by the wetting balance method
JIS C 60068-2-31:2013 Environmental testing.Part 2-31: Tests .Test Ec: Rough handling shocks, primarily for equipment-type specimens
JIS C 0043:1995 Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens
JIS C 60068-2-20:2010 Environmental testing -- Part 2-20: Tests -- Test T: Test methods for solderability and resistance to soldering heat of devices with leads
JIS W 0812:1993 Airborne equipment -- Environmental conditions and test procedures (RTCA/DC - 160C)

Professional Standard-Ships, Environmental test reliability test equipment

CB 1146.13-1985 Environmental test method test Kb for ship equipment: Alternating salt spray
CB 1146.6-1996 Environmental testing of ship equipment and impact of engineering guidelines
CB 1146.11-1996 Guidelines for environmental testing and engineering of marine equipment mold
CB 1146.12-1996 Environmental test and engineering guidelines for marine equipment salt spray
CB 1146.17-1996 Environmental Test and Engineering Guidelines for Ship Equipment Ice Accumulation
CB 1146.18-1996 Environmental test and engineering guidelines for naval equipment wind speed
CB 1146.3-1996 Guidelines for environmental testing and engineering of marine equipment at high temperatures
CB 1146.1-1996 General Rules for Environmental Test and Engineering Guidelines for Ship Equipment
CB 1146.2-1996 Environmental testing and engineering guidelines for naval equipment at low temperature
CB 1146.4-1996 Environmental testing and engineering guidelines for marine equipment damp heat
CB 1146.7-1996 Collision between marine equipment environmental test and engineering guidelines
CB 1146.14-1996 Guidelines for environmental testing and engineering of ship equipment sand and dust

CZ-CSN, Environmental test reliability test equipment

CSN 34 5638-1983 Electrotechnical and electronic equipment. Resistance tests against environmental effects. Hydrogen sulphide test.
CSN IEC 605-4:1992 Equipment reliability testing. Part 4: Procedures for determining point estimates and confidence limits from equipment reliability determination tests
CSN 34 5701-1983 Electrotechnical and electronic equipment. Resistance teat against environmental effects. Cold test
CSN IEC 605-6:1992 Equipment reliability testing Part 6: Tests for the validity of a constant failure rate assumption
CSN IEC 605-3-5:1997 Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation
CSN 34 5686-1980 Electrotechnical and radioelectronic equipment. Resistance tests against environmental effects. Salt mist tests. Cyclic regime
CSN 34 5690-1981 Electroteclmical and electronical equipment. Tests of environmental effects. Solar radiation test

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Environmental test reliability test equipment

GB/T 17215.9311-2017 Electricity metering equipment—Dependability—Part 311:Accelerated reliability testing—Elevated temperature and humidity
GB/T 5170.5-2016 Inspection methods for environmental testing equipments for electric and electronic products—Part 5：Damp heat testing equipments

European Telecommunications Standards Institute (ETSI), Environmental test reliability test equipment

ETSI EN 300 019-2-1-2014 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage (V2.2.1)

ATIS - Alliance for Telecommunications Industry Solutions, Environmental test reliability test equipment

0600063-2017 Guidelines for Environmental Testing and Evaluation of Communication Equipment

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Environmental test reliability test equipment

JEDEC JESD22A113E-2006 Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing

工业和信息化部, Environmental test reliability test equipment

YD/T 2379.9-2019 Environmental test requirements and test methods for telecommunications equipment Part 9: Shipborne equipment
YD/T 2379.6-2022 Environmental test requirements and test methods for telecommunications equipment Part 6: Transportation
YD/T 2379.10-2020 Environmental test requirements and test methods for telecommunications equipment Part 10: Airborne equipment for civil aircraft
YD/T 2379.11-2022 Environmental test requirements and test methods for telecommunications equipment Part 11: Equipment for underground fixed use
YD/T 2379.1-2019 Environmental test requirements and test methods for telecommunications equipment Part 1: General guidelines

Taiwan Provincial Standard of the People's Republic of China, Environmental test reliability test equipment

CNS 9589-1982 General Rules of Environmental Testing Method for Automotive Electronic Equipment

KR-KS, Environmental test reliability test equipment

KS W ISO 2669-2018 Environmental tests for aircraft equipment－Steady-state acceleration
KS C IEC 60068-3-3-2020 Environmental testing — Part 3-3: Guidance seismic test methods for equipments
KS A IEC 60605-6-2003(2023)
KS C IEC 60068-2-20-2021 Environmental testing — Part 2-20: Tests — Test T: Test methods for solderability and resistance to soldering heat of devices with leads
KS W ISO 7137-2018 Aircraft－Environmental conditions and test procedures for airborne equipment

GB-REG, Environmental test reliability test equipment

REG NASA-LLIS-1728-2006 Lessons Learned ?Space Shuttle - Designing Environments Tests for Sustainability

International Organization for Standardization (ISO), Environmental test reliability test equipment

ISO 2678:1985 Environmental tests for aircraft equipment; Insulation resistance and high voltage tests for electrical equipment
ISO 2678:1977 Title missing - Legacy paper document
ISO 2653-1:1975 Environmental tests for aircraft equipment — Part 1: Ice formation
ISO 2678-1:1977 Environmental tests for aircraft equipment — Part 1: Insulation resistance and high voltage tests for electrical equipment
ISO 2669:1995 Environmental tests for aircraft equipment - Steady-state acceleration
ISO 7137:1981 Aircraft; environmental conditions and test procedures for airborne equipment
ISO 7137:1992 Aircraft; environmental conditions and test procedures for airborne equipment

Professional Standard - Water Conservancy, Environmental test reliability test equipment

SL 144-1995 Check method of water environmental detecting instrument and experimental equipment
SL 144-1995（条文说明） Calibration (inspection) method of water environment testing instruments and test equipment

National Metrological Technical Specifications of the People's Republic of China, Environmental test reliability test equipment

JJF 1101-2003 Calibration Specification for the Equipment of the Environmental Testing for Temperature and Humidity
JJF 1101-2019 Calibration Specification for the Equipment of the Environmental Testing for Temperature and Humidity

JP-JASO, Environmental test reliability test equipment

JASO D001-1987 General Rules of Environmental Testing Method for Automotive Electronic Equipment
JASO D001-1994 General rules of environmental testing methods for automotive electronic equipment

American Society for Testing and Materials (ASTM), Environmental test reliability test equipment

ASTM C537-87(2004)e1 Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
ASTM C537-87(2009) Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
ASTM C537-87(2014)e1 Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage

SE-SIS, Environmental test reliability test equipment

SIS SS 436 15 03-1986 Electronic equipment for industry and trade - Immunity to conducted electromagnetic interference - Environmental classification and tests
SIS SS 436 15 03-1984 Electronic equiprnent for industry and trade - Immunity to conducted electromagnetic interference - Environmental classification and tests
SIS SS 436 15 23-1984 Electronic equipment for industry and trade - Immunity to radio frequency electromagnetic fields - Environmental classification and tests
SIS SS-ISO 7137:1982 Aircraft - Environmental conditions and test procedures for airborne equipment

CENELEC - European Committee for Electrotechnical Standardization, Environmental test reliability test equipment

EN 60068-2-31:1993 Basic Environmental Testing Procedures Part 2: Tests Test Ec: Drop and Topple@ Primarily for Equipment- Type Specimens

Professional Standard - Medicine, Environmental test reliability test equipment

YY/T 1420-2016 Environmental requirement and test methods for medical ultrasonic equipment
YY/T 0291-2016 Environmental requirements and test methods for medical X-ray equipment
YY/T 0291-1997 Environmental requirements and test methods for medical X-ray equipment
YY/T 0291-2007 Environmental requirements and test methods for medical X-ray equipment

TR-TSE, Environmental test reliability test equipment

TS 2089-1975 BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT TEST Ca:DAMP HEAT (STEADY STATE)

Professional Standard - Aquaculture, Environmental test reliability test equipment

SC/T 7002.14-1991 Environmental test conditions and methods for marine electronic equipment electromagnetic compatibility

PL-PKN, Environmental test reliability test equipment

PN E04603-02-1992 Electrical and electronic products Environmental testing Test Cb: Damp heat, steady state, primarily for e?uipment