ZH
RU
ES

Nut use temperature

Nut use temperature, Total:493 items.

In the international standard classification, Nut use temperature involves: Fasteners for aerospace construction, Fasteners, Pipeline components and pipelines, Materials for aerospace construction, Electrical accessories, Hand-held tools, Aircraft and space vehicles in general, Aerospace electric equipment and systems, Coatings and related processes used in aerospace industry, Printed circuits and boards, Thermodynamics and temperature measurements, Home textiles. Linen, Road vehicles in general, Rails and railway components, Construction of railways, Construction materials.

Association Francaise de Normalisation, Nut use temperature

NF L22-566:1979 Gang channel self-locking nuts, straight, deep counterbore. Maximum temperature : 235 degrees C. ISO thread.
NF L22-565:1979 Gang channel self-locking nuts, straight, deep counterbore. Maximum temperature : 120 degrees C. ISO thread.
NF L22-524:1969 Nut-double hexagon, self locking, fine pitch threads, for temperatures up to 650 degrees celsius.
NF L22-500:2001 Fasteners - Nuts, self-locking, with maximum operating temperature less than or equal to 425 o - Technical requirements.
NF L22-500:2014 Fasteners - Nuts, self-locking, with maximum operating temperature less than or equal to 425 oC - Technical requirements
NF L22-500/AM1:1974
NF L22-519:1969 12 POINT SELF-LOCKING FLANGE NUTS. TEMPERATURE CLASS : 260 DEGREES C.
NF L22-510:1954 Aircraft fasteners with sim thread. Self-locking hexagon nuts for temperatures below 300 degrees C (rech.).
NF L22-542:1966 Aircraft fasteners. Self-locking hexagon nuts. Maximum temperature : 120 degrees C.
NF L22-588:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-560:1966 Aircraft fasteners. Self-locking anchor nuts, countersunk type, 90 degrees angle. Maximum temperature : 260 degrees C - 425 degrees C.
NF L22-434:1987 HEXAGONAL NUTS. NORMAL HEIGHT. NORMAL ACROSS FLATS. ISO LH THREAD. 4H CLASS.
NF L22-433:1987 HEXAGONAL NUTS. NORMAL HEIGHT. NORMAL ACROSS FLATS. ISO RH THREAD. 4H CLASS.
NF E74-306:2017 Outillage de manoeuvre des vis et écrous - Dégagement pour manoeuvre par clés des écrous et des vis H
NF L22-461:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS WITH LOCKING HOLES. ISO RH THREAD,4H5H CLASS,FINE PITCH.
NF L22-457:1987 HEXAGONAL CASTELLATED NUTS. NORMAL HEIGHT. ISO RH THREAD. 4H CLASS.
NF L22-518:1966 Aircraft fasteners. 12 point thick flange nuts, self-locking. Temperature classes : 500, 700, 800 degrees C.
NF L22-558:1966 Aircraft fasteners. Self-locking anchor nuts, countersunk type with two lugs. Maximum temperature : 260 degrees C - 425 degrees C.
NF E74-307:1985 Assembly tools for screws and nuts. Combination wrenches. Lengths.
NF L22-541:2001 Aircraft bolts and nuts - Hexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC or in heat resisting steel, silver plated - Classification : 1 100 MP
NF L54-143-012*NF EN 2997-012:2009 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 oC to 175 oC continuous, 200 oC continuous, 260 oC peak - Part 012 : jam-nut for jam-nut receptacles - Product
NF L22-522:1966 Aircraft fasteners. 12 point thick flange nuts, self-locking, fine pitch. Temperature classes : 500, 700, 800 degrees C.
NF L22-559:1966 Aircraft fasteners. Self-locking anchor nuts, countersunk type, single lug with two holes. Maximum temperature : 260 degrees C - 425 degrees C.
NF L22-440:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS,WITH LOCKING HOLES. ISO LH THREAD. 4H CLASS.
NF L22-439:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS,WITH LOCKING HOLES. ISO RH THREAD. 4H CLASS.
NF L22-589:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L22-462:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS WITH LOCKING HOLES.ISO LH THREAD,4H5H CLASS,FINE PITCH.
NF E74-313:1992 Assembly tools for screws and nuts. Double-headed, deep offset and modified offset, box wrenches. Lengths. Thickness of heads.
NF E74-311:1994 Assembly tools for screws and nuts. Double-headed, flat and offset, box wrenches. Lengths. Thickness of the heads.
NF L22-432:1987 HEXAGONAL NUTS. NORMAL HEIGHT. NORMAL ACROSS FLATS. ISO LH THREAD. II,4H5H OR 5H,TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-431:1987 HEXAGONAL NUTS. NORMAL HEIGHT. NORMAL ACROSS FLATS. ISO RH THREAD. II,4H5H OR 5H,TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-519:2000 Aircraft bolts and nuts - Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature) / 235 oC
NF L22-569:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 oC
NF L22-596:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L22-570:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-451:1987 HEXAGONAL CASTELLATED NUTS. NORMAL HEIGHT. ISO THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-587:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC
NF L22-590:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, 60o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L22-588:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L22-570:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, 60o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 oC
NF L22-568:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-277:1968 Drilled cheese head screws, fully threaded, for temperatures above 260 degrees C.
NF L22-455:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-457:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-590:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads,in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L24-600:1988 Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods.
NF L22-568:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 oC
NF L22-567:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 oC
NF L22-576:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC
NF L22-573:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-572:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-587:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-589:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-592:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-567:2001 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC.
NF L22-458:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class.
NF L22-436:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS. ISO THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-435:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS. ISO RH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L24-508*NF EN 4069:1996 Aerospace series. Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated. Classification : 600 MPa (at ambient temperature) / 650 degrees celsius.
NF L22-500:2018 Fasteners - Nuts, self-locking, with maximum operating temperature less than or equal to 425 oC - Technical requirements
NF L22-442:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-433:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-437:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS,WITH LOCKING HOLES. ISO RH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-575:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC
NF L22-594:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF E74-307:2001 Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads.
NF E74-307*NF ISO 7738:2015 Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads
NF L22-569:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempeerature)/235 oC.
NF L22-576:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-596:2000 Aircraft bols and nuts - Nuts, anchor, self-locking, floating, singl lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-571:2000 Aircraft bolts and nuts - Nuts, anchjor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-575:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L24-521*NF EN 3227:2010 Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread - Classification : 1 100 MPa (at ambient temperature) /2 35oC
NF E74-310:2001 Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads.
NF L22-443:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-434:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, 4H tolerance class
NF L22-441:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-438:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS,WITH LOCKING HOLES. ISO LH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-592:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L22-591:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L22-571:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC
NF L22-577:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-595:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, flatting, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-594:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-593:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF EN 3227:2010 Série aérospatiale - Écrous hexagonaux ordinaires, hauteur normale, surplats normaux, en acier, cadmiés, filetage à gauche - Classification : 1 100 MPa (à température ambiante) / 235oC
NF L22-451:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter
NF L54-143-004*NF EN 2997-004:2007 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 oC to 175 oC continuous, 200 oC continuous, 260 oC peak - Part 004 : jam-nut mounted receptacle - Product stan

ES-AENOR, Nut use temperature

German Institute for Standardization, Nut use temperature

DIN 65247:1989 Aerospace; nuts, hexagon, slotted/castellated, thin, with MJ thread, corrosion-resisting steel, class: 1100 MPa/425 °C
DIN 6379:2003-08 Studs for use with tee nuts
DIN V 65900-15:1999 Aerospace series - Materials for self-locking nuts, threaded inserts and screw thread inserts of temperature classes 425 °C (AECMA Technical Report TR 3791:1999)
DIN EN 3004:1997-03 Aerospace series - Nuts, self-locking, MJ theads, in heat resisting steel FE-PA2601 (A286); classification: 1100 MPa (at ambient temperature)/650 °C; technical specification; German version EN 3004:1997
DIN 65395:1989 Aerospace; studs with MJ thread, ring locked, steel; nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN 65330:1987 Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C
DIN 65268:2011 Aerospace - Hexagon bolts, with MJ thread, short thread, titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 C
DIN 65438:1993 Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65525:1992 Aerospace; bolts, hexagon, close tolerance, with MJ-thread, short thread, steel, nominal tensile strength 1100 MPa, for temperatures up to 235 °C
DIN 65464:1990 Aerospace; studs with MJ thread, ring locked, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 267-29:1993 Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C
DIN 65555:1987 Aerospace; hexagon bolts with short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C
DIN 65265:1998 Aerospace - Screws, hexagon bolts with MJ thread, threaded approximately to head, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN EN 3379:1996-05 Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 °C; German version ...
DIN EN 4069:1996 Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 °C; German version EN 4069:1996
DIN EN 2997-015:2011 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 015: Jam-nut mounted receptacle with integrated
DIN 65339:1998 Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, corrosion-resisting steel - Nominal tensile strength 1100 MPa, for temperatures up to 425 °C
DIN 65442:1993 Aerospace; bihexagonal head bolts, close tolerance, with medium-length MJ thread, corrosion resisting nickel alloy; nominal tensile strength 1550 MPa, for temperatures up to 315 °C
DIN 65526:1998 Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65338:1993 Aerospace; hexagon bolts, close tolerance, with short-length MJ thread, shoulder, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 71428:1989-11 Compression couplings with olives; cylindrical thread nipples for use with union nuts
DIN 65286:1987 Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 900 MPa, for temperatures up to 235 °c

Professional Standard - Aviation, Nut use temperature

HB 7686-2001 General specification for MJ thread self-locking nuts with service temperature higher than 425°C
HB 7595-1998 General specifications for self-locking nut with ＭＪthread and operating temperature no more than 425°Ｃ
HB 7595-2011 General specification for nuts, self-locking, with maximum operating temperature less than or equal to 425 ℃
HB 7596-1998 Test method for MJ threaded self-locking nuts when the service temperature is not higher than 425°C
HB 7687-2001 Test method for MJ threaded self-locking nuts used at temperatures above 425°C
HB 5639-1987 Twelve angle flattened self-locking nuts (maximum temperature 230°C)
HB 5638-1987 Hexagonal flattened self-locking nuts (maximum working temperature 230°C)
HB 5635-1987 Hexagonal slotted self-locking nuts (maximum working temperature 650°C)
HB 5634-1981 Hexagonal flattened self-locking nuts (maximum working temperature 650°C)
HB 5639-1981 Hexagon slotted self-locking nuts (maximum working temperature 230°C)
HB 5635-1981 Hexagonal slotted self-locking nuts (maximum working temperature 650°C)
HB 5638-1981 Hexagonal flattened self-locking nuts (maximum working temperature 230°C)
HB 5640-1987 Twelve angle flattened self-locking nuts (maximum working temperature 230°C)
HB 5636-1987 Twelve angle flattened self-locking nuts (maximum working temperature 650°C)
HB 5641-1987 Twelve angle slotted self-locking nuts (maximum working temperature 230°C)
HB 5636-1981 Twelve angle flattened self-locking nuts (maximum working temperature 650°C)
HB 5637-1981 Twelve angle slotted self-locking nuts (maximum working temperature 650°C)
HB 5641-1981 Twelve angle slotted self-locking nuts (maximum working temperature 230°C)
HB 5640-1981 Twelve angle flattened self-locking nuts (maximum working temperature 230°C)
HB 5637-1987 Twelve angle slotted self-locking nuts (maximum working temperature 650°C)

Military Standard of the People's Republic of China-General Armament Department, Nut use temperature

GJB 3580-1999 General specification for self-locking nuts with MJ threads for use at temperatures not higher than 425°C

IT-UNI, Nut use temperature

UNI 5023-1962
UNI 811-1975
UNI 3845-1957
UNI ISO 888:1986 Bolts, screws and studs. Nominal lenghts, and thread lenghts for general purpose bolts.
UNI 5713-1975

Professional Standard - Aerospace, Nut use temperature

QJ 1747-1989 Strength classification and temperature classification of bolts and nuts for MJ threaded fasteners
QJ 3242-2005 General specification for high temperature self-locking nuts
QJ 1753-1989 Test method for self-locking nuts with MJ threaded fasteners with a maximum operating temperature greater than 425°C
QJ 1756-1989 Technical conditions for self-locking nuts with MJ threaded fasteners with a maximum working temperature greater than 425°C
QJ 1752-1989 Test method for self-locking nuts with MJ threaded fasteners whose maximum working temperature is less than or equal to 425°C
QJ 1755-1989 Technical conditions for self-locking nuts with MJ threaded fasteners whose maximum working temperature is less than or equal to 425°C
QJ 1754-1989 Specifications for ordinary and slotted nuts with MJ threaded fasteners with a maximum operating temperature less than or equal to 425°C
QJ 1751-1989 Test method for plain and slotted nuts with MJ threaded fasteners with a maximum operating temperature less than or equal to 425°C

American Society for Testing and Materials (ASTM), Nut use temperature

ASTM A194/A194M-14a Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-16 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-14 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-03 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
ASTM A194/A194M-22a Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-06a Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-06 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-10a : Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-05b Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-07b Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-11 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A962/A962M-19 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-18 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-17 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A194/A194M-18 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-16a Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-20 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-17a Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-15a Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-20a Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-17 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM E1502-98(2003)e1 Standard Guide for Use of Freezing-Point Cells for Reference Temperatures
ASTM E1502-16 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
ASTM A962/A962M-23 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-23a Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-07 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-07b Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-00 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-01a Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-01 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-03 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-11 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-22 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM C447-85(2001)e1 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
ASTM C447-85(1995)e1 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
ASTM C447-15(2022) Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
ASTM A194/A194M-22 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A194/A194M-10 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A962/A962M-10 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

Society of Automotive Engineers (SAE), Nut use temperature

SAE AS7252-2006 Nuts, Self-Locking, Steel High Strength, All Metal 450°F Use, UNJ Thread Form
SAE AS7252A-2020 Nuts, Self-Locking, Steel High Strength, All Metal 450 °F Use, UN and UNJ Thread Form
SAE ARP688-1995 REUSABLE LOCK FOR SPANNER NUTS
SAE ARP688A-2012 Reusable Lock for Spanner Nuts
SAE AS28002-1-1970 AS28002 Washer - for use with AS28001 Nuts
SAE AS7252-1991 Nuts, Self-Locking, Steel High Strength, All Metal 450 Degrees F Use, UNJ Thread Form ; FSC 5310
SAE AS7251B-2006 Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UNJ Thread Form
SAE AS7250B-2006 Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UN Thread Form
SAE AS7250-1991 NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 °F USE, UN THREAD FORM
SAE AS7251-1991 NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 °F USE, UNJ THREAD FORM
SAE AS7251A-1995 NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 °F USE, UNJ THREAD FORM
SAE AS7250D-2018 Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UN Thread Form
SAE AS7251C-2020 Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UNJ Thread Form
SAE AS1371-2004 Nuts, Self-Locking, Corrosion Resistant Steel High Strength, Prevailing Torque, All Metal 800°F (427°C) Use, UNJ Thread Form
SAE MA1573-1988 Nut, Self-Locking - Steel, Class 1100 MPa/235°C, MJ Thread Procurement Specification For, Metric FSC 5310
SAE AMS7250F-1990 Nuts, Self-Locking Steel, Corrosion and Heat Resistant, High Strength, All-Metal, 1200°F Use, Unified (MIL-S-7742) Thread Form
SAE TS135-2-2004 TS135 Technical Specification for All Metal Self-Locking Nuts (MJ Threads Reduced Hexagon - Deep Counterbored Tensile Strength:- 1100 MPa at Ambient Temperature
SAE TS149-2-2004 TS149 Technical Specification for All Metal Self-Locking Nuts (UNJ Threads) 1550 MPa (225,000 lbf/in²) Minimum Tensile Strength at Ambient Temperature
SAE TS129-3-2004 TS129 Performance Specification for All Metal Self-Locking Shaft Nuts (Unified Threads) Non-Corrosion Resistant Steel Rated Temperature 350°C
SAE AMS7250D-1980 NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT High Strength, All Metal 1200° F(650° C) Use, Unified (MIL-S-7742) Thread Form
SAE AMS7250E-1980 NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT High Strength, All Metal 1200° F(650° C) Use, Unified (MIL-S-7742) Thread Form
SAE AMS7252-1969 NUTS, SELF-LOCKING, STEEL High Strength, Prevailing-Torque, All Metal 450 F (232 C) Use, Unified "J" (MIL-S-8879) Thread Form
SAE AS7253-1991 NUTS, SELF-LOCKING, NICKEL ALLOY, UNS N07001 180 000 psi, ALL METAL 1400 °F USE, UNJ THREAD FORM
SAE TS128-6-2006 TS128 "All Metal" Self-Locking Nuts (UNJ Threads) 1100 MPa (160,000 lbf/in²) Minimum Tensile Strength at Room Temperature
SAE TS9-4-2004 TS9 Performance Specification for All Metal Self-Locking Shaft Nuts (Unified Threads) Non Corrosion Resistant Steel Rated Temperature 235°C.
SAE TS128-7-2019 TS128 "All-Metal" Self-Locking Nuts (UNJ Threads) 1100 MPa (160,000 lbf/in²) Minimum Tensile Strength at Room Temperature
SAE AMS7251C-1989 NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT High Strength, All Metal 1200°F (650°C) Use, Unified "J" (MIL-S-8879) Thread Form
SAE TS26-3-2004 TS26 Technical Specification for All Metal Self-Locking Nuts (UNJ Threads) 1210 MPa (175,000 lbf/in²) Minimum Tensile Strength at Ambient Temperature
SAE AS54381-1-1995 AS54381-390 Nut, Self Locking, Extended Washer, Double Hexagon - for Use with Impedance Type Bolts
SAE AS64379-1-2004 AS64379-380 Nut, Self-Locking, Extended Washer, Double Hexagon – for Use with Impedance Type Bolts
SAE AS64379-2-2022 AS64379-380 NUT, SELF LOCKING, EXTENDED WASHER, DOUBLE HEXAGON - FOR USE WITH IMPEDANCE TYPE BOLTS
SAE AS54381-2-2023 AS54381-390 Nut, Self Locking, Extended Washer, Double Hexagon - for Use with Impedance Type Bolts
SAE TS8-10-2004 TS8 Technical Specification for "All Metal" Self-Locking Nuts (UNJ Threads) 1100 MPa (160,000 lbf/in²) Minimum Tensile Strength at Room Temperature
SAE AMS7253B-1980 NUTS, SELF-LOCKING, ALLOY, CORROSION AND HEAT RESISTANT High Strength, All Metal 1400°F (760°C) Use, Unified "J" (MIL-S-8879) Thread Form
SAE AMS7250A-1966 NUTS, SELF-LOCKING, CORROSION AND HEAT RESISTANT High Strength, Prevailing Torque, All Metal 1200 F (649 C) Use, Unified National Thread Form
SAE AMS7250B-1969 NUTS, SELF-LOCKING, CORROSION AND HEAT RESISTANT High Strength, Prevailing-Torque, All Metal 1200 F (649 C) Use, Unified (MIL-S-7742) Thread Form
SAE AS8432-1-1960 AS8432 Packing Plates - Plain for Use with B.S.A. 125-201 - Single Anchor Stiffnuts
SAE AMS7250C-1973 NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT High Strength, Prevailing-Torque, All Metal 1200° F (649° C) Use, Unified (MIL-S-7742) Thread Form
SAE AMS7253-1969 NUTS, SELF-LOCKING, CORROSION AND HEAT RESISTANT High Strength, Prevailing-Torque, All Metal 1400 F (760 C) Use, Unified "J" (MIL-S-8879) Thread Form
SAE AMS7251-1966 NUTS, SELF-LOCKING, CORROSION AND HEAT RESISTANT High Strength, Prevailing Torque, All Metal 1200 F (649 C) Use, Unified National "J" Thread Form
SAE AMS7251A-1969 NUTS, SELF-LOCKING, CORROSION AND HEAT RESISTANT High Strength, Prevailing-Torque, All Metal 1200 F (649 C) Use, Unified "J" (MIL-S-8879) Thread Form

Standard Association of Australia （SAA）, Nut use temperature

AS 2528:1982 Bolts, studbolts and nuts for flanges and other high and low temperature applications
AS/NZS 1252:1996 High strength steel bolts with associated nuts and washers for structural engineering

SAE - SAE International, Nut use temperature

SAE AS7252A-2015 Nuts, Self-Locking, Steel High Strength, All Metal 450 °F Use, UN and UNJ Thread Form
SAE ARP688-1962 Reusable Lock for Spanner Nuts
SAE ARP688A-2002 Reusable Lock for Spanner Nuts
SAE ARP688B-2018 Reusable Lock for Spanner Nuts
SAE AMS7252A-1973 "NUTS@ SELF-LOCKING@ STEEL High Strength@ Prevailing Torque@ all metal 450 degrees F (230 degrees C) Use@ Unified ""J"" (MIL-S-8879) Thread Form"
SAE AMS7252B-1980 "NUTS@ SELF-LOCKING@ STEEL High Strength@ all metal 450 degrees F (230 degrees C) Use@ Unified ""J"" (MIL-S-8879) Thread Form"
SAE AMS7252C-1990 "NUTS@ SELF-LOCKING@ STEEL High Strength@ All Metal 450 degrees F (230 degrees C) Use@ Unified ""J"" (MIL-S-8879) Thread Form"
SAE AS7250D-2013 Nuts@ Self-Locking@ Steel@ Corrosion and Heat Resistant High Strength@ All Metal 1200 °F Use@ UN Thread Form
SAE AS7250C-2008 Nuts@ Self-Locking@ Steel@ Corrosion and Heat Resistant High Strength@ All Metal 1200 °F Use@ UN Thread Form
SAE AS7251C-2014 Nuts@ Self-Locking@ Steel@ Corrosion and Heat Resistant High Strength@ All Metal 1200 °F Use@ UNJ Thread Form
SAE AS7251A-1996 Nuts@ Self-Locking@ Steel@ Corrosion and Heat Resistant High Strength@ All Metal 1200 Degrees F Use@ UNJ Thread Form FSC 5310
SAE AS7251B-2001 Nuts@ Self-Locking@ Steel@ Corrosion and Heat Resistant High Strength@ All Metal 1200 Degrees F Use@ UNJ Thread Form (FSC 5310)
SAE AS7250A-1996 Nuts@ Self-Locking@ Steel@ Corrosion and Heat Resistant High Strength@ All Metal 1200 Degrees F Use@ UN Thread Form FSC 5310
SAE AS7250B-2001 Nuts@ Self-Locking@ Steel@ Corrosion and Heat Resistant High Strength@ All Metal 1200 Degrees F Use@ UN Thread Form (FSC 5310)
SAE AS1371-1976 Nuts@ Self-Locking@ Corrosion Resistant Steel High Strength@ Prevailing Torque@ All Metal 800 Degrees F (427 Degrees C) Use@ UNJ Thread Form
SAE AS1371-1993 Nuts@ Self-Locking@ Corrosion Resistant Steel High Strength@ Prevailing Torque@ All Metal 800 Degrees F (427 Degrees C) Use@ UNJ Thread Form
SAE AS1371A-2015 Nuts@ Self-Locking@ Corrosion Resistant Steel High Strength@ Prevailing Torque@ All Metal 800°F (427°C) Use@ UNJ Thread Form
SAE AMS7250F-1993 NUTS@ SELF-LOCKING@ STEEL@ CORROSION AND HEAT RESISTANT HIGH STRENGTH@ ALL METAL 1200 DEGREES F (650 DEGREES C) USE@ UNIFIED (MIL-S-7742) THREAD FORM
SAE AMS7251D-1991 "NUTS@ SELF-LOCKING@ CORROSION AND HEAT RESISTANT STEEL HIGH STRENGTH@ ALL METAL 1200 DEGREES F (650 DEGREES C) USE@ UNIFIED ""J"" (MIL-S-8879) THREAD FORM"
SAE AMS7251E-1993 "NUTS@ SELF-LOCKING@ CORROSION AND HEAT RESISTANT STEEL HIGH STRENGTH@ ALL METAL 1200 DEGREES F (650 DEGREES C) USE@ UNIFIED ""J"" (MIL-S-8879) THREAD FORM"
SAE AMS7253C-1990 "NUTS@ SELF-LOCKING@ CORROSION AND HEAT RESISTANT ALLOY HIGH STRENGTH@ ALL METAL 1400 DEGREES F (760 DEGREES C) USE@ UNIFIED ""J"" (MIL-S-8879) THREAD FORM"

AIA/NAS - Aerospace Industries Association of America Inc., Nut use temperature

NAS1409-1979 Nut@ Self-Locking@ Hexagon-Regular Height@ Fine Thread@ Non- Airborne Use (Rev 5)
NAS1408-1979 Nut@ Self-Locking@ Hexagon-Regular Height@ Coarse Thread@ Non- Airborne Use (Rev 6)
NASM14179-1999 Nut@ Plate@ Self-Locking@ Floating@ Two Lug@ Reduced Rivet Spacing@ Steel@ (Polyamide Insert) 500 Cycles Reuse@ Replaceable Nut@ 160 KSI Ftu@ 450 Degrees F
NAS1872-1975 Nut@ Torque Limiting@ 900 Degrees F Application@ 1/4-28 UNJF-3B Thread
NASM33588-1999 Nut@ Self-Locking@ Aircraft@ Reliability and Maintainability Usage Requirements for
NASM85353-2000 Nuts (Fasteners)@ Internally Threaded@ Preload Locking@ 450 Degrees F@ 800 Degrees F and 1200 Degrees F@ General Specification for
NASM14183-2003 Washer@ Countersunk and Plain@ for Use with Bolts and Nuts Up to and Including 220 KSI Ftu (Rev 1)

Defense Logistics Agency, Nut use temperature

DLA AN818 REV 20 NOTICE 1-2011 NUT, TUBE COUPLING, SHORT [Use: SAE AS5175]
DLA MS27236 REV B-2007 SHOULDER - DESIGNED FOR 45?AND 90?SWIVEL NUT, HOSE TO TUBE ADAPTERS, REUSABLE, HYDRAULIC, FUEL AND OIL LINES
DLA MS16286 REV A VALID NOTICE 2-2005 NUTS, HEXAGON, FINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS16286 REV A NOTICE 1-2000 NUTS, HEXAGON, FINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS16286 REV A (1)-1999 NUTS, HEXAGON, FINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS16286 REV A-1997 NUTS, HEXAGON, FINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS27226 REV B-2007 SWIVEL NUT ASSEMBLY 45 DEGREE , ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES
DLA MS27238 REV B-2007 WIRE, NUT RETAINING, DESIGNED FOR ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES
DLA MS16285 REV A VALID NOTICE 2-2005 NUT, HEXAGON, SEMIFINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS16285 REV A NOTICE 1-2000 NUT, HEXAGON, SEMIFINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA MS16285 REV A-1997 NUT, HEXAGON, SEMIFINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
DLA AN924 REV 12-2012 NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING [Use: SAE AS5178A, SAE AS5178A, SAE AS5178]
DLA MS14180 NOTICE 1-1994 NUT REPLACEMENT FOR SELF LOCKING PLATE, FLOATING, TWO LUG, STEEL, (VESPEL INSERT) 500 CYCLES REUSE 160 KSI FTU, 450 DEG. F
DLA MS14180-1979 NUT REPLACEMENT FOR SELF LOCKING PLATE, FLOATING, TWO LUG, STEEL, (VESPEL INSERT) 500 CYCLES REUSE 160 KSI FTU, 450 DEG. F
DLA MS21206 REV A NOTICE 1-1999 WASHER, COUNTERSUNK AND PLAIN, FOR USE WITH BOLTS AND NUTS UP TO AND INCLUDING 220 KSI FTU
DLA MS21206 REV A-1991 WASHER, COUNTERSUNK AND PLAIN, FOR USE WITH BOLTS AND NUTS UP TO AND INCLUDING 220 KSI FTU

RU-GOST R, Nut use temperature

GOST 20700-1975 Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST R 52643-2006 High-strength screws and nuts washers for metal structures. General specifications
GOST R 53664-2009 High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications

Aerospace, Security and Defence Industries Association of Europe (ASD), Nut use temperature

ASD-STAN TR 3791-1999
ASD-STAN PREN 2997-012-2006 Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak Part 012: Jam-nut for jam-nut receptacles Product standa

Korean Agency for Technology and Standards (KATS), Nut use temperature

KS W ISO 9199:2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
KS W ISO 7481-2005(2020) Aerospace－Nuts, self-locking, with maximum operatingtemperature less than or equal to 425 ℃－Test methods
KS W 0935-2018 Aerospace — Nuts, hexagonal, slotted(castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa(at ambient temperature)/120 ℃, 600 MPa(at ambient temperature)/ 235 ℃,
KS W ISO 8940:2020 Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug,with counterbore, with MJ threads, classifications:900 MPa (at ambient temperature)/120 °C,900 MPa (at ambient temperature)/175 °C an
KS W ISO 8538:2007 Aerospace－Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications：1 100 MPa(at ambient temperature)/235 ℃,1 100 MPa(at ambient temperature)/315 ℃ and 1 100 MPa(at ambient temperature)/425 ℃－Dimensions
KS W ISO 12272:2005 Aerospace-Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications:900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and 900 MPa(at ambient temperature)/425 ℃-Dimensions
KS W ISO 12273:2005 Aerospace-Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambient temperature)/425 ℃-Dimensions
KS W ISO 12272:2016 Aerospace－Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications：900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and 900 MPa(at ambient temperature)/425 ℃－Dimensions
KS W ISO 12273:2016 Aerospace－Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambient temperature)/425 ℃－Dimensions
KS W ISO 8642-2007(2018) Aerospace－Self-locking nuts with maximum operating temperature greater than 425 ℃－Test methods
KS W ISO 5858-2008(2018) Aerospace－Nuts, self-locking, with maximum operating temperature less than 425℃－Procurement specification
KS W ISO 8641-2005(2020) Aerospace－Self-locking nuts with maximum operating temperature greater than 425 ℃－Procurement specification
KS W ISO 9618:2007 Aerospace－Nuts, hexagonal, slotted(castellated), reduced height,normal across flats, with MJ threads, classifications：450 MPa (at ambient temperature)/120 ℃,450 MPa (at ambient temperature)/235 ℃,600 MPa (at ambient temperature)/425 ℃,900 MPa (at ambient
KS W ISO 8642:2007 Aerospace－Self-locking nuts with maximum operating temperature greater than 425 ℃－Test methods
KS W ISO 7332:2009 Aerospace－Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications：1 100 MPa (at ambient temperature)/235 ℃, 1 100 MPa (at ambient temperature)/315 ℃ and 1 100 MPa (at ambient temperature)/425 ℃－Di
KS W ISO 9156:2020 Aerospace — Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications:1 100 MPa (at ambient temperature)/235 °C,1 100 MPa (at ambient temperatur
KS W ISO 8279:2007 Aerospace-Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications:600 MPa(at ambient temperature)/120 ℃,600 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/425 ℃, 1 100 MPa(at ambient temperature)/23
KS B ISO 2320-2003(2018)
KS W ISO 8641:2005 Aerospace－Self-locking nuts with maximum operating temperature greater than 425 ℃－Procurement specification
KS B ISO 7738:2003 Assembly tools for screws and nuts-Combination wrenches-Lengths of wrenches and maximum thickness of heads
KS B ISO 7738-2003(2008) Assembly tools for screws and nuts－Combination wrenches－Lengths of wrenches and maximum thickness of heads
KS B ISO 7738:2013 Assembly tools for screws and nuts－Combination wrenches－Lengths of wrenches and maximum thickness of heads
KS W ISO 7481:2005 Aerospace－Nuts, self-locking, with maximum operatingtemperature less than or equal to 425 ℃－Test methods
KS M ISO 871:2019 Plastics — Determination of ignition temperature using a hot-air furnace
KS W ISO 8538:2020 Aerospace — Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 °C, 1 100 MPa (at ambient temperature)/315 °C a
KS W 0932-1998 Aerospace-Self-locking, fixed, single-lug anchor nuts,reduced series, with counterbore, strength classification 1100MPa and maximum operating temperature 235 degrees C
KS B 2819-2016 Sets of torque-shear type high tension bolt, hexagon nut and plain washer for structural joints
KS W ISO 8279-2007(2018) Aerospace－Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications：600 MPa(at ambient temperature)/120 ℃,600 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient t
KS W ISO 5858:2008 Aerospace－Nuts, self-locking, with maximum operating temperature less than 425℃－Procurement specification

KR-KS, Nut use temperature

KS W ISO 9199-2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
KS W ISO 8940-2020 Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug,with counterbore, with MJ threads, classifications:900 MPa (at ambient temperature)/120 °C,900 MPa (at ambient temperature)/175 °C an
KS W ISO 9156-2020 Aerospace — Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications:1 100 MPa (at ambient temperature)/235 °C,1 100 MPa (at ambient temperatur
KS M ISO 871-2019 Plastics — Determination of ignition temperature using a hot-air furnace
KS W ISO 8538-2020 Aerospace — Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 °C, 1 100 MPa (at ambient temperature)/315 °C a

BE-NBN, Nut use temperature

Professional Standard - Railway, Nut use temperature

TB/T 2347-1993 High-strength rail joint bolts and nuts

Group Standards of the People's Republic of China, Nut use temperature

T/ZZB 1698-2020 High strength clinching nuts for automobile
T/ZZB 0263-2017 High strength bolts, nuts and washer for wind power
T/HOMETEX 21-2021 Method for measuring comfort temperature of quilt

GB-REG, Nut use temperature

REG NASA-LLIS-1426-1998 Lessons Learned ?Cadmium-plated High-Strength Bolts Used in High Temperature Applications (1998)

HU-MSZT, Nut use temperature

British Standards Institution (BSI), Nut use temperature

BS A 359:2000 Nuts, barrel, self-locking, floating, with MJ threads, classifications. 900 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/235°C, 1250 MPa (at ambient temperature)/235°C, 1550 MPa (at ambient temperature)/235°C. Dimensions
BS A 337:1999 Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 329:1999 Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 298:1988 Methods of test for self-locking nuts with maximum operating temperature greater than 425 °C
BS A 336:1999 Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS ISO 8642:2008 Aerospace - Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods
BS A 321:1997 Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/315°C and 900 MPa (at ambient temperature)/425°C. Dimensions
BS A 334:1999 Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS 2A 302:2000 Nuts, self-locking, with maximum operating temperatures less than or equal to 425°C. Procurement specification
BS 2A 295:2000 Nuts, self-locking, with maximum operating temperature less than or equal to 425°C. Test methods
BS A 345:1999 Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C, 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 340:1999 Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 330:1999 Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/315°C and 900 MPa (at ambient temperature)/425°C. Dimensions
BS ISO 12273:2010 Aerospace. Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/ 315 °C and 900 MPa (at ambient temperature)/425 °C. Dimensions
BS A 31-54:1951 Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes
BS ISO 8641:2008 Aerospace - Self-locking nuts with maximum operating temperature greater than 425 °C - Procurement specification
BS 1041-2.1:1985 Code for temperature measurement - Expansion thermometers - Guide to selection and use of liquid-in-glass thermometers
BS ISO 9618:2016 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
BS A 339:1999 Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 344:1999 Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperatures)/235°C, 1100 MPa (at ambient temperature)/315°C, 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 338:1999 Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS ISO 10102:2001 Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Length of wrenches and thickness of the heads
BS ISO 8279:2008 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
BS EN 3229:2010 Aerospace series. Nuts, hexagonal, plain, reduced height normal across flats, in steel, cadmium plated, left hand thread. Classification: 900 MPa (at ambient temperature)/235°C
BS EN 3229:2009 Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated, left hand thread - Classification: 900 MPa (at ambient temperature)/235 °C
BS 1041-3:1989 Temperature measurement - Guide to selection and use of industrial resistance thermometers
BS ISO 7738:2001 Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads
BS ISO 7738:2015 Assembly tools for screws and nuts. Combination wrenches. Lengths of wrenches and maximum thickness of heads
BS A 317:1997 Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications - 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/235
BS A 315:1997 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (
BS EN 3733-103:2008 Aerospace series — Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous — Part 103: Protective cover jam nut receptacle — Product standard
BS 64:1992 Specification for normal and high strength steel bolts and nuts for railway rail fishplates
BS A 31-54:1951+A6:2012 Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes
BS EN 3227:2010 Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread - Classification: 1100 MPa (at ambient temperature)/235 °C
BS 4395-2:1969 Specification for high strength friction grip bolts and associated nuts and washers for structural engineering. Higher grade bolts and nuts and general grade washers
BS 1041-7:1988 Temperature measurement - Guide to selection and use of temperature/time indicators
15/30328094 DC BS A 31-54. Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes
BS EN 14399-4:2005 High-strength structural bolting assemblies for preloading. System HV. Hexagon bolt and nut assemblies
BS EN 4443:2012 Aerospace series. Nuts, elliptical clinch, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated, Classification: 900 MPa (at ambient temperature)/425°C
BS EN 3005:2004 Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature)/730℃ - Technical specification
BS EN 3733-106:2008 Aerospace series — Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous — Part 106: Receptacle connector dummy jam nut — Product standard

Aerospace Industries Association, Nut use temperature

AIA NAS 1408-1979 (Inactive)Nut, Self-Locking, Hexagon-Regular Height, Coarse Thread, Non- Airborne Use (Rev. 6)
AIA NAS 1409-1979 (Inactive)Nut, Self-Locking, Hexagon-Regular Height, Fine Thread, Non- Airborne Use (Rev. 5)
AIA NAS 448-1950 (Inactive)Nut Plate - Self-Locking - Angle (Rev. 1)
AIA NAS 472-1951 (Inactive)Bracket - Angle Speed Nut (Rev. 1)
AIA NAS 473-1951 (Inactive)Bracket - Angle Speed Nut (Rev. 1)
AIA NAS 474-1951 (Inactive)Bracket - Angle Speed Nut (Rev. 1)
AIA NAS 475-1951 (Inactive)Bracket - Angle Speed Nut (Rev. 1)
AIA NAS 684-1987 (Inactive)Nut, Self-Locking, Plate-Corner, Low Height, C'Bore Superseded - November 1987 (Use MS21055, MS21056) (Rev. 11)
AIA NAS 685-1974 (Inactive)Nut, Self-Locking, Plate-Corner, Low Height, Csk Superseded - December 1974 (Use MS21057, MS21058) (Rev. 11)
AIA NAS 1022-1991 (Inactive)Nut, Self-Locking, Hexagon-Low Height, Low Strength Superseded - September 1985 (Use MS21042, MS21043,MS21245, and MS21083) (Rev. 8)
AIA NAS 1441-1961 Locknut - Bearing Retaining Cancelled - March 1961 (Use NAS1493)
AIA NAS 1021-1991 (Inactive)Nut, Self-Locking, Hexagon-Regular Height Superseded - September 1985 (Use MS21042 Thru MS21046) (Rev. 10)
AIA NAS 680-1987 (Inactive)Nut, Self-Locking, Plate Two Lug, Low Height, C'Bore Superseded - November 1987 (Use MS21047, MS21048) (Rev. 10)
AIA NAS 1067-1987 (Inactive)Nut, Self-Locking, Plate-One Lug, Regular Height, Side-by-Side Superseded - November 1987 (Use MS21086, MS21087) (Rev. 9)
AIA NASM14179-1999 Nut, Plate, Self-Locking, Floating, Two Lug, Reduced Rivet Spacing, Steel, (Polyamide Insert) 500 Cycles Reuse, Replaceable Nut, 160 KSI Ftu, 450 Degrees F FSC 5310
AIA NAS 1872-1975 Nut, Torque Limiting, 900 Degrees F Application, 1/4-28 UNJF-3B Thread R(2001)
AIA NAS 686-1974 (Inactive)Nut, Self-Locking, Plate-Two Lug, Low Height, C'Bore, Floating Superseded - December 1974 (Use MS21059, MS21060) (Rev. 13)
AIA NAS 687-1974 (Inactive)Nut, Self-Locking, Plate-One Lug, Low Height, C'Bore, Floating Superseded - December 1974 (Use MS21061, MS21062) (Rev. 11)
AIA NAS 693-1987 (Inactive)Nut Assembly, Self- Locking, Gang Channel- Low Height, Csk (Superseded January 1, 1989; Use MS21066, MS21067 and NAS 380)
AIA NAS 694-1987 (Inactive)Nut Assembly, Self- Locking, Gang Channel- Low Height, Csk (Superseded January 1, 1989; Use MS21066, MS21067 and NAS 380)
AIA NAS 695-1987 (Inactive)Nut Assembly, Self- Locking, Gang Channel- Low Height, Csk (Superseded January 1, 1989; Use MS21066, MS21067 and NAS 380)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Nut use temperature

GB/T 3103.4-2014 Tolerances for fasteners.Bolt/nut assemblies for service temperatures from -200 ℃~+700 ℃
GB/T 1229-1991 High strength large hexagon nuts for steel structures
GB/T 1229-2006 High strength large hexagon nuts for steel structures

International Organization for Standardization (ISO), Nut use temperature

ISO/DIS 7481 Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C — Test methods
ISO 9199:1998 Aerospace - Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at
ISO 12278:1999 Aerospace - Nuts, barrel, self-locking, floating, self-aligning, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/235 °C, 1250 MPa (at ambient temperature)/235 °C and 1550 MPa (at ambient tempera
ISO 8279:1985 Aerospace; Plain hexagon nuts with strength classification 1 100 MPa and maximum operating temperature 235 degrees C
ISO 13589:1998 Aerospace - Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/
ISO 3168:1998 Aerospace - Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12274:1997 Aerospace - Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads; classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3209:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3223:1998 Aerospace - Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3224:1998 Aerospace - Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3209:2016 Aerospace - Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425
ISO 10096:1997 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa
ISO 8642:1986 Aerospace; Self-locking nuts with maximum operating temperature greater than 425 degrees C; Test methods
ISO 8641:1987 Aerospace; Self-locking nuts with maximum operating temperature greater than 425 degrees C; Procurement specification
ISO 7995:1985 Aerospace — Fasteners — Nuts, hexagon, self-locking — Strength classification 1 100 MPa — Maximum operating temperature 235 degrees C
ISO 8538:1999 Aerospace - Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3221:1998 Aerospace - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12273:2010 Aerospace - Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12272:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimen
ISO 7738:2001 Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads
ISO 7738:2015 Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads
ISO 9609:2016 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C, 9
ISO 9618:2016 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
ISO 9609:1996 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient tempe
ISO 9618:1996 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (
ISO 3225:1998 Aerospace - Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - D
ISO 3191:1998 Aerospace - Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C
ISO 7332:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C
ISO 10102:2001 Assembly tools for screws and nuts - Double headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads
ISO 12277:2000 Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1100 MPa (at ambient temperature)/120 °C, 1100 MPa (at ambient temperature)/235 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 6787:1982 Assembly tools for screws and nuts; Adjustable wrenches; Width across flats up to 50 mm
ISO 8641:2008 Aerospace - Self-locking nuts with maximum operating temperature greater than 425 °C - Procurement specification
ISO 8642:2008 Aerospace - Self-locking nuts with maximum operating temperature greater than 425 °C - Test methods
ISO/FDIS 7481:2023 Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C — Test methods
ISO 7481:2023 Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C — Test methods
ISO 9156:1998 Aerospace - Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C
ISO 5858:1999 Aerospace - Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C - Procurement specification
ISO 7481:2000 Aerospace - Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C - Test methods
ISO 3222:1998 Aerospace - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425
ISO 5858:1991 Aerospace; self-locking nuts with maximum operating temperature less than or equal to 425 C; procurement specification

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Nut use temperature

JEDEC JESD22-A108D-2010 Temperature, Bias, and Operating Life

The American Road & Transportation Builders Association, Nut use temperature

AASHTO M 292M/M 292-2008 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
AASHTO M 292M/M 292-2010 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
AASHTO M 292M/M 292-2013 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High- Temperature Service, or Both
AASHTO M 292M/M 292-2014 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
AASHTO M 292M/M 292-2015 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
AASHTO M 292M/M 292-2009 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
AASHTO M 292M_M 292-2007 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both

国家市场监督管理总局、中国国家标准化管理委员会, Nut use temperature

GB/T 3098.24-2020 Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications

European Committee for Standardization (CEN), Nut use temperature

EN 2910:1994 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 2906:1994 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 4069:1996 Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 °C
EN 3377:1996 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 2907:1995 Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 3723:1996 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 2911:1995 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 3196:1994 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 2997-015:2011 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 015: Jam-nut mounted receptacle with integrated
EN 3227:2010 Aerospace series - Nuts@ hexagonal@ plain@ normal height@ normal across flats@ in steel@ cadmium plated@ left hand thread - Classification: 1 100 MPa (at ambient temperature) / 235 ��
EN 2908:1994 Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
EN 3722:1995 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 4116:2004 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/425 °C
EN 4116:2003 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread Classification: 1 100MPa (at ambient temperature)/425 degrees Celsius
EN 4443:2012 Aerospace series - Nuts, elliptical clinch, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated, Classification: 900 MPa (at ambient temperature)/ 425 °C
EN 3239:1995 Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/730 °C

IN-BIS, Nut use temperature

IS 6649-1985

IPC - Association Connecting Electronics Industries, Nut use temperature

IPC TM-650 2.6.21A-2010 Service Temperature of Flexible Printed Boards

GOSTR, Nut use temperature

GOST 9064-1975 Nuts for flanged connections with medium temperature 0 to 650 °C. Types and main dimensions

Shanxi Provincial Standard of the People's Republic of China, Nut use temperature

DB14/T 2471-2022 Requirements for the use of high-strength bolts

American National Standards Institute （ANSI), Nut use temperature

ANSI/ASTM A194/A 194M:2001 Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service

SE-SIS, Nut use temperature

SIS SS-ISO 8642:1988 Aerospace — Self-locking nuts with maxi- mum operating temperature greater than 425 °C — Test methods
SIS SS-ISO 8641:1989 Aerospace — Self-locking nuts with maxi- mum operating temperature greater than 425° C — Procurement specification
SIS SS-ISO 2320:1988 Prevailing torque type steel hexagon nuts - Mechanicai and performance properties
SIS SS-ISO 5858:1992 Aerospace — Self-locking nuts with maximum operating temperature less than or equal to 425 °C — Procurement specification

Professional Standard - Coal, Nut use temperature

MT/T 913-2002 Hydraulic nuts and high-strength fasteners for coal mining machinery

European Association of Aerospace Industries, Nut use temperature

AECMA TR 3791-1999 Luft- Und Raumfahrt Werkstoffe Fur Selbstsichernde Muttern, Gewindeeinsatze Und Draht-Gewindeeinsatze Fur Temperaturklassen Von Less Than or Equal to 425 Degrees Celsius Aerospace Series Materials for Self-Locking Nuts, Threaded Inserts and Screw Thread
AECMA PREN 2997-012-2006 Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures ?65 癈 to 175 癈 continuous, 200 癈 continuous, 260 癈 peak Part 012: Jam-nut for jam-nut receptacles Product standa

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Nut use temperature

IPC TM-650 2.6.21-1988 Service Temperature of Flexible Printed Wiring

未注明发布机构, Nut use temperature

DIN 6915:1999 Hexagon nuts with large widths across flats for high strength structural bolting
BS EN 3012:1996(1999) Nuts, bihexagonal, self - locking, in heat resisting nickel base alloy NI - P101HT (Waspaloy) — Classification : 1210 MPa (at ambient temperature)/ 730 °C
BS 1041-3:1989(2000) Temperature measurement — Part 3 : Guide to selection and use of industrial resistance thermometers
BS 1041-2.2:1989(2000) Temperature measurement — Part 2 : Expansion thermometers — Section 2.2 Guide to selection and use of dial - type expansion thermometers
BS 1041-7:1988(1999) Temperature measurement — Part 7 : Guide to selection and use of temperature / time indicators
BS 1041-2.1:1985(2007) Temperature measurement — Part 2 : Expansion thermometers — Section 2.1 Guide to selection and use of liquid - in - glass thermometers
BS EN 3723:1996(1999) Nuts, hexagonal, self - locking, in heat resisting steel FE - PA92HT (A286), MoS2 coated — Classification : 1100 MPa (at ambient temperature)/ 425 °C

AASHTO - American Association of State Highway and Transportation Officials, Nut use temperature

M 292/M 292M-1992 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service (ASTM A194/A194M-91)
M 292M/M 292-2010 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service@ or Both
M 292M/M 292-2011 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service@ or Both
M 292M/M 292-2008 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service@ or Both
M 292M/M 292-2013 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High- Temperature Service@ or Both
M 292M/M 292-2015 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service@ or Both
M 292M/M 292-2009 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service@ or Both
M 292M/M 292-2007 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service@ or Both
M 292M/M 292-2014 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service@ or Both

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Nut use temperature

ASHRAE 4580-2002 Estimation of U.S. Design Temperatures Using Daily Maximum and Minimum Temperatures (RP-1171)
ASHRAE DA-00-3-2-2000 Direct Calculation of Mean Radiant Temperature Using Radiant Intensities
ASHRAE 3748-1994 Measurement of the Humidity Ratio of Moist Air Using a Thermo-Hygrometer

ZA-SANS, Nut use temperature

SANS 10094:2005 The use of high-strength friction-grip bolts

United States Navy, Nut use temperature

NAVY GGG-W-644 C-1992 WRENCH, SOCKET (WHEEL NUT) [Use In Lieu Of: NAVY GGG-W-00644 A]

Japanese Industrial Standards Committee (JISC), Nut use temperature

JIS B 1056:2000 Prevailing torque type steel hexagon nuts -- Mechanical and performance properties

Danish Standards Foundation, Nut use temperature

DS/EN 3379:1997 Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730°C

AENOR, Nut use temperature

UNE 28567:1988 METRIC FASTENERS FOR AEROSPACE CONSTRUCTION. HEXAGON SLOTTED (CASTELLATED) NUTS. STRENGHT CLASSIFICATION 1 100 MPA. MAXIMUM OPERATING TEMPERATURE 235oC.
UNE 28581:1986 AEROSPACE. FASTENERS. SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERTURE LESS THAN OR EQUAL TO 425oC. TEST METHODS.

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Nut use temperature

PREN 4124-1994 Aerospace Series Shank Nuts@ Self-Locking@ in Heat Resisting Nickel Base Alloy NI-P101HT (Waspaloy)@ Silver Plated on Thread@ for 60 Degree Swage Classification: 1 210 MPa (at Ambient Temperature)/730 Degrees C (Edition P1)

Lithuanian Standards Office , Nut use temperature

LST EN 3379-2001 Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1 210 MPa (at ambient temperature)/730°C

(U.S.) Ford Automotive Standards, Nut use temperature

FORD ESS-M11P24-A1-2013 ADHESIVE, MALE THREADED FASTENER - FOR SERVICE TEMPERATURES BELOW 135 °C ***TO BE USED WITH FORD WSS-M99P1111-A***

ES-UNE, Nut use temperature

UNE-EN 4122:2018 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1 100 MPa (at ambient temperature) / 650 °C (Endorsed by Asociación Española de Normalización in June of 2018.)