ZH
RU
ES

Nylon service temperature

Nylon service temperature, Total:377 items.

In the international standard classification, Nylon service temperature involves: Medical equipment, Products of the chemical industry, Plastics, Materials for aerospace construction, Thermodynamics and temperature measurements, Clothes, Rubber, Fasteners, Paints and varnishes, Printed circuits and boards, Installations in buildings, Home textiles. Linen, Construction materials, Protection of and in buildings, Waxes, bituminous materials and other petroleum products, Lubricants, industrial oils and related products, Rotating machinery, Refractories, Tobacco, tobacco products and related equipment, Fasteners for aerospace construction, Aircraft and space vehicles in general, Road engineering, Industrial automation systems, Semiconductor devices, Powder metallurgy, Nuclear energy engineering, Road vehicles in general, Occupational safety. Industrial hygiene, Analytical chemistry, Aerospace electric equipment and systems, Glass.

(U.S.) Ford Automotive Standards, Nylon service temperature

FORD WSB-M7H52-A-1993 WEBBING, NYLON, AHCOR BELT, HIGH STRENGTH
FORD ESB-M4D189-A-2006 POLYAMIDE (PA) 6 OR 66, 13% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D240-A-2011 NYLON (TYPE 11), COATING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M15H46-A-2009 THREAD, NYLON - MONOFILAMENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M15H39-A-2009 THREAD, NYLON, THREE PLY, TEX 210 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M15H51-B2-2009 THREAD, NYLON, FOUR PLY, TEX 90 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D278-A-2005 NYLON COPOLYMER, EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D278-A-2009 NYLON COPOLYMER, EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D216-A-2009 NYLON (TYPE 612) MOLDING COMPOUND, HEAT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M15H51-D-2009 THREAD, NYLON, THREE PLY, TOP THREAD, TEX 70 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D374-A-2005 TUBING, NYLON (TYPE 11 AND TYPE 12) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D133-A-2005 NYLON, GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M99D42-A-2006 POLYPROPYLENE, NYLON FLOCKED SURFACE *** TO BE USED WITH FORD WSS-M99P1111-A ***
FORD WSB-M15H61-A-2002 THREAD, NYLON EMBROIDERY, 3 PLY TWISTED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D366-A1-2008 NYLON, (TYPE 6), 40% GLASS REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D545-A-2014 NYLON/POLYPHENYLENE OXIDE ALLOY, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D545-A-2005 NYLON/POLYPHENYLENE OXIDE ALLOY, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M70J6-A-2005 PAINT, POWDERED, THERMOPLASTIC NYLON (TYPE 11) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D101-A-2006 NYLON (TYPE 6), HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D185-A-2008 NYLON, 20% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M15H43-C-2009 THREAD, NYLON, LOW TWIST MULTIFILAMENT, TEX 150 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M15H61-A-2009 THREAD, NYLON EMBROIDERY, 3 PLY TWISTED, TEX 30 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M15H61-A-2008 THREAD, NYLON EMBROIDERY, 3 PLY TWISTED, TEX 30 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D545-A-2010 NYLON/POLYPHENYLENE OXIDE ALLOY, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M70J6-A-2011 PAINT, POWDERED, THERMOPLASTIC NYLON (TYPE 11) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M4D428-A-2006 NYLON (TYPE 66) COPOLYMER, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D423-A-2006 NYLON (TYPE 6) COPOLYMER, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H115-A-2004 CARPET, BCF NYLON, CUT PILE, TRILAMINATE, LANIER PATTERN, 407 g/m2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D379-A-2006 NYLON (TYPE 6/6), MODIFIED - HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M15H64-A-2010 THREAD, NYLON, SERGING, BULKED TEXTURED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D235-D2-2004 BELT, POSITIVE DRIVE - HIGH TEMPERATURE POLYCHLOROPRENE - GLASS FIBER REINFORCED, NYLON FABRIC FACING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D235-D2-2009 BELT, POSITIVE DRIVE - HIGH TEMPERATURE POLYCHLOROPRENE - GLASS FIBER REINFORCED, NYLON FABRIC FACING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D235-D2-1984 BELT, POSITIVE DRIVE - HIGH TEMPERATURE POLYCHLOROPRENE - GLASS FIBER REINFORCED, NYLON FABRIC FACING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D267-A-2006 NYLON (TYPE 6/6), MODIFIED - HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D240-A2-2007 COATING, POWDERED, THERMOPLASTIC NYLON (TYPE 11 OR 12)***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D353-A1-2008 NYLON (TYPE 6/6), MINERAL FILLED - HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H115-A2-2010 CARPET, BCF NYLON, CUT PILE, LATEX BACKED, LANIER PATTERN, 407 g/m2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESL-M4D533-A-2006 NYLON (PA) 6/66 COPOLYMER, 33% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSK-M4D673-A)
FORD ESE-M4D287-A-2006 NYLON (TYPE 6/6), 33% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H125-A-2008 CARPET, BCF NYLON, LATI PATTERN, PRECOATED, 370g/m2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H134-A-2010 CARPET, BCF NYLON, MINI-BERBER, 680 g/m2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D305-A-2006 NYLON (TYPE 6) MOLDING COMPOUND, NUCLEATED HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H128-A-2008 CARPET, BCF NYLON, LOW LOOP PILE, PRECOATED, 670g/m2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D335-A-2007 NYLON (TYPE 66), 43% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D244-B-2004 RUBBER INSULATOR - EPDM, NYLON FABRIC, LAMINATE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M96D25-A3-2006 HOSE, AIR CONDITIONING REFRIGERANT (NYLON 6 BARRIER) RESISTANT, MEDIUM PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H115-A2-2007 CARPET, BCF NYLON, CUT PILE, LATEX BACKED, LANIER PATTERN, 407 G/M2 - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M15H51-E-2009 THREAD, NYLON, THREE PLY, UNDERTHREAD, TEX 70 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D325-A-2006 NYLON (TYPE 6) COPOLYMER, 20% GLASS - MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H129-A-2008 CARPET, BCF NYLON, SANTA FE PATTERN, RIGITEX, 305 g/m? ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H136-A-2008 CARPET, BCF NYLON, PARMA PATTERN, SOLUTION DYED, PRECOATED, 339 g/m? ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D160-C-2010 HOSE, MEDIUM PRESSURE - AIR CONDITIONING UNITS NYLON CONSTRUCTION ACID RESISTANT SLEEVE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D429-C3-2013 NYLON (PA) 6, MOLDING COMPOUND, 34% MINERAL FILLED, EXTERIOR, PAINTED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M4D287-B-2006 NYLON (TYPE 66), 33% GLASS FIBER REINFORCED - HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D159-A-2006 NYLON (TYPE 66), GLASS FIBER REINFORCED - MOLYBDENUM DISULFIDE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H130-A-2003 CARPET, BCF NYLON, CASINO PATTERN, PRECOATED, 360 g/m ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H130-B-2004 CARPET, BCF NYLON, CASINO PATTERN, PRECOATED, 365 g/m ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2L24-A-2014 COPPER WIRE, SOFT OR ANNEALED ROUND, HEAVY POLYURETHANE AND NYLON INSULATED, SOLDERABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M1P83-B1-2006 ELECTROPLATING, BRIGHT OR LOW GLOSS DECORATIVE OVER ABS, PPO OR MINERAL FILLED NYLON - INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Use WSS-M1P83-C1
FORD ESH-M4D367-A-2005 NYLON (TYPE 612), 43% GLASS FIBER REINFORCED HEAT STABILIZED - BLACK ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H134-A-2003 CARPET, BCF NYLON, MINI-BERBER, 680 g/m2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H124-A-2008 CARPET, BCF NYLON, ITAL PATTERN, LATEX BACKCOATED, 220g/m2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H136-B-2008 CARPET, BCF NYLON, PARMA PATTERN, PIECE DYED, PRECOATED, 339 g/m? ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D244-B-2009 RUBBER INSULATOR - EPDM, NYLON FABRIC, LAMINATE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M4D367-A-2009 NYLON (TYPE 612), 43% GLASS FIBER REINFORCED HEAT STABILIZED - BLACK ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H115-B-2010 CARPET, BCF NYLON 6/6, CUT PILE, LANIER PATTERN, 407 g/m2 (12 oz) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H123-B-2010 CARPET, BCF NYLON 6/6, CUT PILE, SHIVA PATTERN, 678 g/m2 (20 oz) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H123-B-2012 CARPET, BCF NYLON, CUT PILE, SHIVA PATTERN, 678 g/m2 (20 oz) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2L25-A-2014 COPPER WIRE, SOFT OR ANNEALED ROUND, SINGLE POLYURETHANE AND NYLON INSULATED, SOLDERABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M1P83-B4-2006 ELECTROPLATING, BUFFED DECORATIVE OVER ABS, PPO OR MINERAL FILLED NYLON - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on WSB-M1P83-B1; Use WSS-M1P83-C2
FORD ESA-M4D349-B-2006 NYLON (TYPE 66), 13% FIBERGLASS REINFORCED - IMPACT MODIFIED, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H136-A5-2008 CARPET, BCF NYLON, PARMA PATTERN, SOLUTION DYED,POLYETHYLENE BACKED, 340 g/m? - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H115-A3-2004 CARPET, BCF NYLON, CUT PILE, PRECOATED, LANIER PATTERN, 407 g/m2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H115-A4-2004 CARPET, BCF NYLON, CUT PILE, BILAMINATE, LANIER PATTERN, 407 g/m2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M1P83-B3-2006 ELECTROPLATING, BRIGHT OR LOW GLOSS DECORATIVE OVER MINERAL FILLED NYLON - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on WSB-M1P83-B1; Use WSS-M1P83-C1
FORD WSS-M3H128-A2-2008 CARPET, BCF NYLON, LOW LOOP PILE, LATEX BACKCOATED, HEAVY LAYER SUBSTRATE BACKING, 670g/m2, FLOOR MATS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H130-A5-2004 CARPET, BCF NYLON, CASINO PATTERN, POLYETHYLENE BACKED, 360 g/m ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D353-A2-2008 NYLON (TYPE 6/6), MINERAL FILLED - HIGH MODULUS GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M4D353-A1)
FORD WSS-M3H125-A4-2008 CARPET, BCF NYLON, LATI PATTERN, FILLED POLYPROPYLENE BACKTING, 370 g/m? ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H137-B2-2008 CARPET, BCF NYLON, PALERMO PATTERN, THERMAL PLASTIC BARRIER MATERIAL, 474 g/m? ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H137-B3-2008 CARPET, BCF NYLON, PALERMO PATTERN, LATEX, HEAVY LAYER SUBSTRATE, 474 g/m? ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H124-A2-2008 CARPET, BCF NYLON, ITAL PATTERN, LATEX, BACKCOATED, SEATBACK APPLICATIONS 220 g/m2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D379-B-2006 NYLON (TYPE 6/6), MODIFIED - HEAT STABILIZED HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D366-B2-2007 POLYAMIDE (PA) 66, 25% GLASS FIBER / MINERAL REINFORCED, HEAT STABILIZED, 100% POST INDUSTRIAL NYLON ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD M5B324-A-1985 CLEANER ALKALINE SPRAY AMBIENT TEMPERATURE
FORD M5B382-A-1989 CLEANER ALKALINE SPRAY AMBIENT TEMPERATURE
FORD M5B404-A-1995 CLEANER, ALKALINE, AMBIENT TEMPERATURE
FORD WSS-M3H133-B5-2008 CARPET, BCF NYLON, BAVARIA PATTERN, 515 g/m?, POLYETHYLENE BACKED, PIECE DYED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M1P83-B1-2008 ELECTROPLATING, BRIGHT OR LOW GLOSS DECORATIVE OVER ABS, PPO OR MINERAL FILLED NYLON - INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D331-A-2006 NYLON (TYPE 6), HEAT STABILIZED - FLEXIBLE - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D133-A-2009 NYLON, GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2L25-A-2003 COPPER WIRE, SOFT OR ANNEALED ROUND, SINGLE POLYURETHANE AND NYLON INSULATED, SOLDERABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D366-A2-2008 NYLON (TYPE 6/6), 25% GLASS SPHERE - 15% GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H133-A4-2008 CARPET, BCF NYLON, BAVARIA PATTERN, FILLED POLYPROPYLENE BACKING, 515 g/m? ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD U-MC002-8011-1992 LUBRICANT, CONVEYOR, AMBIENT TEMPERATURE
FORD ESF-M2L24-A-2003 COPPER WIRE, SOFT OR ANNEALED ROUND, HEAVY POLYURETHANE AND NYLON INSULATED, SOLDERABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H133-A3-2010 CARPET, BCF NYLON, BAVARIA PATTERN, LATEX, HEAVY LAYER SUBSTRATE RECOATED, 515 g/m? ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D353-A4-2008 NYLON (TYPE 6/6), MINERAL FILLED - EXTERIOR, PAINTED BODY COLOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M4D353-A1)
FORD WSB-M1P83-B3-2008 ELECTROPLATING, BRIGHT OR LOW GLOSS DECORATIVE OVER MINERAL FILLED NYLON - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSB-M1P83-B1)
FORD ESA-M1P47-D-2008 BRIGHT DECORATIVE ELECTROPLATING, OVER ABS, PPO, OR MINERAL FILLED NYLON - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H217-A1-2021 CARPET, BCF NYLON 6 or 66, CUT PILE, HANFORD PATTERN 2050 g/m2 (60oz), TUFTED FLOOR BACKING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D353-A3-2008 NYLON (TYPE 6), MINERAL/ GLASS FILLED - EXTERIOR PAINTED BODY COLOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on ford ESB-M4D353-A1)
FORD M5B381-A-1989 CLEANER LIQUID SPRAY AMBIENT
FORD WSF-M6A12-B-2003 TEMPERATURE COMPENSATOR ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H151-A2-2013 CARPET, BCF NYLON 6/6, CUT PILE, 390 g/m2 (11.5 oz), MASS BACKING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M3H151-A1
FORD WSS-M2C204-A-2009 FLUID, POWER ASSISTED STEERING, EXTENDED TEMPERATURE RANGE ***TO BE USED WITH FORD WSS-M99P1111-A***

GM North America, Nylon service temperature

GM GMP.PA612.009-2002 Nylon 612 - General Purpose, High Viscosity, Lubricated (Revision B)
GM GMP.PA6.015-2013 Nylon 6 鈥?45% Glass Fiber Reinforced, Heat Stabilized Issue 5; Do Not Use on New Programs; Replaced by GMW3029
GM GMP.PA6.054-2013 Nylon 6 鈥?30% Glass Fiber Reinforced, Heat Stabilized Issue 2; Do Not Use on New Programs; Replaced by GMW3029
GMP.PA66.023R-2011 Nylon 66 ?Recycled, High Impact Issue 3; Do Not Use on New Programs; No Replacement
GMP.PA66.038R-2011 Nylon 66 ?Recycled, Heat Stabilized Issue 2; Do Not Use on New Programs; No Replacement
GMP.PA6.047R-2011 Nylon 6 ?Recycled, General Purpose, Heat Stabilized Issue 4; Do Not Use on New Programs; No Replacement
GMP.PA6.049R-2011 Nylon 6 ?Recycled, General Purpose, Heat Stabilized Issue 2; Do Not Use on New Programs; No Replacement
GMP.PA66.049R-2011 Nylon 66 ?Recycled, Heat Stabilized, Black Issue 2; Do Not Use on New Programs; No Replacement
GMP.PA66.085-2011 Flexible Nylon 66 ?600 Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GMP.PA66.009-2011 Nylon 66 - Impact Modified, Heat Stabilized Issue 4; Do Not Use on New Programs; Replaced by GMW16447
GMP.PA66.075-2011 Nylon 66 ?40% Solid Glass Sphere Reinforced Issue 2; Do Not Use on New Programs; No Replacement
GMP.PA6.014-2011 Nylon 6 ?40% Solid Glass Sphere Reinforced Issue 4; Do Not Use on New Programs; No Replacement
GM GMP.PA66.056-2013 NYLON 66 - 15% GLASS FIBER REINFORCED, LUBRICATED Issue 4; Do Not Use on New Programs; No Replacement
GMP.PA66.015-2011 Nylon 66 ?High Impact Modified, Heat Stabilized Issue 6; Do Not Use on New Programs; Replaced by GMW16447
GMP.PA66.067-2011 Nylon 66 ?Reprocessed, Heat Stabilized, High Impact Issue 2; Do Not Use on New Programs; No Replacement
GMP.PA66.068-2011 Nylon 66 ?20% Glass Bead Reinforced, Heat Stabilized Issue 3; Do Not Use on New Programs; No Replacement
GMP.PA6.039-2011 Nylon 6 ?12% Glass Fiber Reinforced, Blow Molding Grade Issue 3; Do Not Use on New Programs; No Replacement
GMP.PA66.011-2011 Nylon 66 ?32% Mineral Filled, Impact Modified Issue 6; Do Not Use on New Programs; No Replacement
GMP.PA66.086-2011 Nylon 66-36% Glass/Mineral Filled, Heat Stabilized Issue 2; Do Not Use on New Programs; No Replacement
GMP.PA6.030-2011 Nylon 6 ?40% Particulate Mineral Filled, Heat Stabilized Issue 2; Do Not Use on New Programs; No Replacement
GM GMP.PA6.004-2013 Nylon 6 - 25% Glass Fiber Reinforced, Heat Stabilized Issue 3; Do Not Use on New Programs; Replaced by GMW3029
GM GMP.PA6.006-2013 Nylon 6 - 13% Glass Fiber Reinforced, Heat Stabilized Issue 5; Do Not Use on New Programs; Replaced by GMW3029
GM GMP.PA6.009-2013 Nylon 6 - 33% Glass Fiber Reinforced, Heat Stabilized Issue 4; Do Not Use on New Programs; Replaced by GMW3029
GM GMP.PA6.029-2013 Nylon 6 - 15% Glass Fiber Reinforced, Heat Stabilized Issue 4; Do Not Use on New Programs; Replaced by GMW3029
GMP.PA66.070-2011 Nylon 66 ?25% Glass Sphere/15% Glass Fiber Reinforced Issue 4; Do Not Use on New Programs; No Replacement
GMP.PA66.088-2011 Nylon 66 ?33% Glass Fiber Reinforced, Impact Modified Issue 2; Do Not Use on New Programs; No Replacement
GMN11230-2010 Sunscreen Lotion Resistant Metallic Paints for Nylon Substrates Issue 2; Do Not Use on New Programs; Replaced by GMW15716
GMP.PA66.035R-2011 Nylon 66 ?Recycled, 43% Glass Fiber Reinforced, Heat Stabilized Issue 3; Do Not Use on New Programs; No Replacement
GMP.PA66.039R-2011 Nylon 66 ?Recycled, 40% Glass Fiber Reinforced, Heat Stabilized Issue 3; Do Not Use on New Programs; No Replacement
GMP.PA66.072-2011 Nylon 66 ?20% Mineral Filled, Impact Modified, Heat Stabilized Issue 2; Do Not Use on New Programs; No Replacement
GMP.PA6.031-2011 Nylon 6 ?34% Mineral Filled, Heat Stabilized, Impact Modified Issue 2; Do Not Use on New Programs; No Replacement
GMP.PA6.025R-2011 Nylon 6 ?Recycled, 34% Mineral Filled, UV Stable, Heat Stabilized Issue 2; Do Not Use on New Programs; No Replacement
GMP.PA66.016-2011 Nylon 66 ?33% Glass Fiber Reinforced, High Impact Modified, Heat Stabilized Issue 5; Do Not Use on New Programs; No Replacement
GMP.PA66.045R-2011 Nylon 66 ?Recycled, 13% Glass Fiber Reinforced, Impact Modified, Heat Stabilized Issue 2; Do Not Use on New Programs; No Replacement
GM GMP.PA6.045-2013 Nylon 6 - 33% Glass Fiber Reinforced, UV Stabilized, Heat Stabilized Issue 4; Do Not Use on New Programs; Replaced by GMW16582
GM GMP.PA66/6.004-2013 Nylon 66/6 - 33% Glass Fiber Reinforced, UV Stable, Heat Stabilized Issue 5; Do Not Use on New Programs; No Replacement
GMP.PA66.036R-2011 Nylon 66 ?Recycled, 40% Glass Fiber Reinforced/Mineral Filled, Heat Stabilized Issue 2; Do Not Use on New Programs; No Replacement
GMP.PA6.055R-2011 Nylon 6 ?Recycled, 40% Mineral Filled, UV Stable, Heat Stabilized Issue 2; Do Not Use on New Programs; No Replacement
GMP.PA6.013-2011 Nylon 6 ?40% Glass Fiber Reinforced/Mineral Filled, Weatherable, Heat Stabilized Issue 4; Do Not Use on New Programs; Replaced by GMW16280
GMP.PA6.046R-2011 Nylon 6 ?Recycled 15% Glass Fiber Reinforced/25% Mineral Filled, Heat Stabilized Issue 3; Do Not Use on New Programs; No Replacement

PL-PKN, Nylon service temperature

PN P83010-1991 Textiles. Vercro strips. Specifications for use

Professional Standard - Medicine, Nylon service temperature

YY/T 1288-2015 Nylon blood filter nets for transfusion equipments for single use

United States Navy, Nylon service temperature

NAVY MIL-W-21632 NOTICE 1-1991 WIRE ROPES, STEEL, BARE AND NYLON COVERED, CORROSION-RESISTING, FLEXIBLE, PREFORMED, OCEANOGRAPHIC AND BATHYTHERMOGRAPHIC
NAVY MIL-W-21632 (1)-1961 WIRE ROPES, STEEL, BARE AND NYLON COVERED, CORROSION-RESISTING, FLEXIBLE, PREFORMED, OCEANOGRAPHIC AND BATHYTHERMOGRAPHIC
NAVY MIL-W-21632-1958 WIRE ROPES, STEEL, BARE AND NYLON COVERED, CORROSION-RESISTING, FLEXIBLE, PREFORMED, OCEANOGRAPHIC AND BATHYTHERMOGRAPHIC
NAVY MS16175 REV C-1967 BODY, NYLON STUFFING TUBE, 90 DEG. [Use: NAVY MIL-S-19622/6 A CANC NOTICE 1, NAVY MIL-S-19622/6 A, NAVY MIL-S-19622/6]
NAVY MS16176 REV C-1967 LOCKNUT, NYLON STUFFING TUBE, 90 DEG. [Use: NAVY MIL-S-19622/15 A CANC NOTICE 1, NAVY MIL-S-19622/15 A, NAVY MIL-S-19622/15]
NAVY MIL-V-3155 C (1)-1965 VALVE, TEMPERATURE REGULATING VENTILATION HEATER, STEAM CONTROL, NAVAL SHIPBOARD USE
NAVY MIL-V-3155 C-1964 VALVE, TEMPERATURE REGULATING VENTILATION HEATER, STEAM CONTROL, NAVAL SHIPBOARD USE

Group Standards of the People's Republic of China, Nylon service temperature

T/ZZB 2810-2022 Modified high-temperature nylon compound for internal structural part of circuit-breaker
T/HOMETEX 21-2021 Method for measuring comfort temperature of quilt

U.S. Military Regulations and Norms, Nylon service temperature

ARMY MIL-S-52607 A-1975 SLING, CARGO, NET: NYLON ROPE (LIGHTWEIGHT TYPE FOR HELICOPTER USE)
ARMY MIL-C-3924 J-1991 CLOTH, OXFORD, COTTON WARP AND NYLON FILLING, QUARPEL TREATED [Use In Lieu Of: ARMY MIL-C-003924 C]

American Society for Testing and Materials (ASTM), Nylon service temperature

ASTM E1137-97 Standard Specification for Industrial Platinum Resistance Thermometers
ASTM E1137/E1137M-04 Standard Specification for Industrial Platinum Resistance Thermometers
ASTM E1137/E1137M-08 Standard Specification for Industrial Platinum Resistance Thermometers
ASTM E1502-16 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
ASTM E1502-98(2003)e1 Standard Guide for Use of Freezing-Point Cells for Reference Temperatures
ASTM C447-85(2001)e1 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
ASTM C447-85(1995)e1 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
ASTM C447-15(2022) Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
ASTM D4366-14 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM E1502-98 Standard Guide for Use of Freezing-Point Cells for Reference Temperatures
ASTM E1299-96(2002) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E2758-22 Standard Guide for Selection and Use of Infrared Thermometers
ASTM E2758-15a Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
ASTM E1502-10 Standard Guide for Use of Freezing-Point Cells for Reference Temperatures
ASTM E1502-22 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
ASTM D5133-99 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-19 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-20 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM E1299-96 Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E2602-09(2015) Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM E1299-96(2023) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E1299-96(2016) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E2683-09 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM C1113-99 Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM C1113-99(2004) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM C1113/C1113M-09 Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM C447-03 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
ASTM D7110-20 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM D7110-05 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM D7110-21 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM E2683-17 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM C1113/C1113M-09(2013) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire lpar;Platinum Resistance Thermometer Techniquerpar;
ASTM E1299-96(2010) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E3186-19 Standard Guide for Use and Testing of Dry-Block Temperature Calibrators
ASTM D4402/D4402M-23 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
ASTM D4402/D4402M-15 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
ASTM D2728-98(2003) Standard Practice for Paving Uses and Application Temperatures for Road Tars
ASTM D2728-98 Standard Practice for Paving Uses and Application Temperatures for Road Tars
ASTM D2728-98(2009) Standard Practice for Paving Uses and Application Temperatures for Road Tars
ASTM C447-15 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
ASTM D2728-98(2014) Standard Practice for Paving Uses and Application Temperatures for Road Tars
ASTM B417-22 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM B417-18 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM E1214-11(2018) Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance
ASTM C1057-12 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
ASTM E563-97 Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature
ASTM C447-03(2010) Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
ASTM E1545-11 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM E1214-11(2023) Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance
ASTM A962/A962M-19 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-18 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-17 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-23 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A962/A962M-23a Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

(U.S.) Parachute Industry Association, Nylon service temperature

PIA-C-8021B-2008 CLOTH, PARACHUTE, NYLON, CARGO AND DECELERATION

Defense Logistics Agency, Nylon service temperature

DLA MIL-DTL-43734 E ADMIN NOTICE 1-2006 CLOTH, DUCK, TEXTURED NYLON - USERS SHOULD USE MIL-C-43734D UNTIL REVISION F IS FINALIZED AND PUBLISHED
DLA MIL-DTL-43734 E-2005 CLOTH, DUCK, TEXTURED NYLON - USERS SHOULD USE MIL-C-43734D UNTIL REVISION F IS FINALIZED AND PUBLISHED
DLA MIL-C-43734 D-1987 CLOTH, DUCK, TEXTURED NYLON - USERS SHOULD USE MIL-C-43734D UNTIL REVISION F IS FINALIZED AND PUBLISHED
DLA A-A-55623 VALID NOTICE 1-2003 SCREW, MACHINE, 82 DEGREE AND 100 DEGREE, FLAT COUNTERSUNK HEAD, SLOTTED, PLASTIC (NYLON), UNC-2A AND UNF-2A
DLA A-A-55623-1997 SCREW, MACHINE, 82 DEGREE AND 100 DEGREE, FLAT COUNTERSUNK HEAD, SLOTTED, PLASTIC (NYLON), UNC-2A AND UNF-2A

International Organization for Standardization (ISO), Nylon service temperature

ISO 11346:1997 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use from an Arrhenius plot
ISO 12013-2:2012 Paints and varnishes - Determination of curing characteristics using a free damped oscillation method - Part 2: Glass transition temperature
ISO 12013-1:2012 Paints and varnishes - Determination of curing characteristics using a free damped oscillation method - Part 1: Start temperature of the curing reaction
ISO 386:1977 Liquid-in-glass laboratory thermometers; Principles of design, construction and use
ISO 18097:2013 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature
ISO/TS 13471-1:2017 Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method
ISO 11346:2004 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use
ISO 11346:2014 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use
ISO 18097:2022 Thermal insulating products for building equipment and industrial installations — Determination of maximum service temperature

Society of Automotive Engineers (SAE), Nylon service temperature

SAE AMS3718/2-1985 WEBBING, WOVEN NYLON For Decelerators 1 (25) Wide, 4000 (17,800) Breaking Strength
SAE AMS3718/5-1985 WEBBING, WOVEN NYLON For Decelerators 1 (25) Wide, 9000 (40,000) Breaking Strength
SAE AMS3718/3-1985 WEBBING, WOVEN NYLON For Decelerators 1 (25) Wide, 6000 (26,700) Breaking Strength
SAE AMS3718/1-1985 WEBBING, WOVEN NYLON For Decelerators 3/4 (19) Wide, 3000 (13,350) Breaking Strength
SAE AMS3718/4-1985 WEBBING, WOVEN NYLON For Decelerators 1-23/32 (43) Wide, 8700 (38,700) Breaking Strength
SAE AMS3718/6-1985 WEBBING, WOVEN NYLON For Decelerators 1-3/4 (44) Wide, 10,000 (44,500) Breaking Strength
SAE AMS3718/2A-1993 (Noncurrent)Webbing, Woven Nylon for Decelerators 1 (25) Wide, 4000 (17,800) Breaking Strength
SAE AMS3718/3A-1993 (Noncurrent)Webbing, Woven Nylon for Decelerators 1 (25) Wide, 6000 (26,700) Breaking Strength
SAE AMS3718/5A-1993 (Noncurrent)Webbing, Woven Nylon for Decelerators 1 (25) Wide, 9000 (40,000) Breaking Strength
SAE AMS3718/1A-1993 (Noncurrent)Webbing, Woven Nylon for Decelerators 3/4 (19) Wide, 3000 (13,350) Breaking Strength
SAE AMS3718/4A-1993 (Noncurrent)Webbing, Woven Nylon for Decelerators 1-23/32 (43) Wide, 8700 (38,700) Breaking Strength
SAE AMS3718/6A-1993 (Noncurrent)Webbing, Woven Nylon for Decelerators 1 3/4 (44) Wide, 10,000 (44,500) Breaking Strength
SAE AMS-G-81827A-2012 Grease, Aircraft, High Load Capacity, Wide Temperature Range
SAE AMS3364C-2001 Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Short Application Life, Durometer 35 - 55
SAE AMS3364B-1985 SILICONE RUBBER COMPOUND Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Short Application Life, Durometer 35 - 55

IN-BIS, Nylon service temperature

IS 12247-1988 Specifications for the safe use of nylon 6 polymers in contact with food, pharmaceuticals and drinking water
IS 12248-1988 Positive Checklist for Safe Use of Nylon 6 Polymer Ingredients in Contact with Food, Drugs and Drinking Water
IS 6537-1972 Crystal Unit Temperature Control Unit User Guide
IS 8787-1977 Design, construction and principles of use of liquid-in-glass thermometers

GM Holden Ltd, Nylon service temperature

HOLDEN HN 2121-2012 Nylon 11 for Powder Coating Do Not Use on New Programs, No Replacement. Limited for current use

SAE - SAE International, Nylon service temperature

SAE AMS3718/3B-2016 Webbing@ Woven Nylon for Decelerators 1 (25) Wide@ 6000 (26@700) Breaking Strength
SAE AMS3718/5B-2016 Webbing@ Woven Nylon For Decelerators 1 (25) Wide@ 9000 (40@000) Breaking Strength
SAE AMS3718/2B-2016 Webbing@ Woven Nylon for Decelerators 1 (25) Wide@ 4000 (17@800) Breaking Strength
SAE AMS3718/1B-2016 Webbing@ Woven Nylon for Decelerators 3/4 (19) Wide@ 3000 (13@350) Breaking Strength
SAE AMS3718/4B-2016 Webbing@ Woven Nylon For Decelerators 1-23/32 (43) Wide@ 8700 (38@700) Breaking Strength
SAE AMS3718/6A-1983 Webbing@ Woven Nylon for Decelerators 1 3/4 (44) Wide@ 10@000 (44@500) Breaking Strength
SAE AMS3718/6B-2016 Webbing@ Woven Nylon for Decelerators 1 3/4 (44) Wide@ 10@000 (44@500) Breaking Strength
SAE AMS2665F-1996 Brazing@ Silver for Use up to 400 Degrees F (204 Degrees C)
SAE EIA-4900-2016 Use of Semiconductor Devices Outside Manufacturers' Specified Temperature Ranges

ZA-SANS, Nylon service temperature

SANS 11346:2003 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use from an Arrhenius plot

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Nylon service temperature

GB/T 20028-2005 Rubber,vulcanized or thermoplastic.Estimation of life-time and maximum temperature of use from an Arrhenius plot
GB/T 17430-2015 Estimating the maximum service temperature of thermal insulation
GB/T 17430-1998 Estimating the maximum use temperature of thermal insulation

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Nylon service temperature

JEDEC JESD22-A108D-2010 Temperature, Bias, and Operating Life

IPC - Association Connecting Electronics Industries, Nylon service temperature

IPC TM-650 2.6.21A-2010 Service Temperature of Flexible Printed Boards

Standard Association of Australia （SAA）, Nylon service temperature

AS 4032.4:2014 Water supply — Valves for the control of heated water supply temperatures, Part 4: Thermostatically controlled taps for the control of heated water supply temperatures
AS 2001.7.7:1983 METHODS OF TEST FOR TEXTILES PART 7-QUANTITATIVE ANALYSIS OF FIBRE MIXTURES AS 2001.7.7 BINARY MIXTURES OF NYLON 6 OR NYLON 6.6 AND CERTAIN OTHER FIBRES (METHOD USING FORMIC ACID 80 PERCENT m/m)

British Standards Institution (BSI), Nylon service temperature

BS ISO 12013-1:2012 Paints and varnishes. Determination of curing characteristics using a free damped oscillation method. Start temperature of the curing reaction
BS ISO 289-1:2015 Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of Mooney viscosity
BS 1041-2.1:1985 Code for temperature measurement - Expansion thermometers - Guide to selection and use of liquid-in-glass thermometers
BS ISO 871:2022 Plastics. Determination of ignition temperature using a hot-air furnace
BS ISO 11346:2014 Rubber, vulcanized or thermoplastic. Estimation of life-time and maximum temperature of use
BS 1041-5:1990 Temperature measurement. Guide to selection and use of radiation pyrometers
20/30404776 DC BS ISO 871. Plastics. Determination of ignition temperature using a hot-air furnace
BS ISO 12013-2:2012 Paints and varnishes. Determination of curing characteristics using a free damped oscillation method. Glass transition temperature
PD ISO/TS 289-4:2017 Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of the Mooney stress-relaxation rate
PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement. Correction for temperature when testing with the CPX method
BS 903-A58.1:2001 Physical testing of rubber - Methods using the Mooney viscometer - Determination of the Delta Mooney value for non-pigmented, oil-extended, emulsion-polymerized SBR - Determination of the Delta Mooney value for non-pigmented, oil-extended, emulsion-polyme
BS ISO 18097:2013 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature
PD IEC/PAS 62240:2001 Use of semiconductor devices outside manufacturer's specified temperature ranges
19/30393435 DC BS ISO 13276. Tobacco and tobacco products. Determination of nicotine purity. Gravimetric method using tungstosilicic acid
BS EN ISO 18096:2022 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation

Association Francaise de Normalisation, Nylon service temperature

NF ISO 12013-2:2012 Peintures et vernis - Détermination des caractéristiques de polymérisation par une méthode utilisant un pendule amorti - Partie 2 : température de transition vitreuse
NF T34-558-2*NF ISO 12013-2:2012 Paints and varnishes - Determination of curing characteristics using a free damped oscillation method - Part 2: glass transition temperature
NF T43-005-1*NF ISO 289-1:2015 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1 : determination of Mooney viscosity
NF EN 12830:2018 Enregistreurs de température pour le transport, le stockage et la distribution des marchandises thermosensibles - Essais, performance, aptitude à l'emploi
NF ISO 289-1:2015 Caoutchouc non vulcanisé - Déterminations utilisant un consistomètre à disque de cisaillement - Partie 1 : détermination de l'indice consistométrique Mooney
NF V37-033:2020 Tobacco and tobacco products - Determination of nicotine purity - Gravimetric method using tungstosilicic acid
NF V37-033:1997 Tobacco and tobacco products. Determination of nicotine purity. Gravimetric method using tungstosilicic acid.
NF ISO 12013-1:2012 Peintures et vernis - Détermination des caractéristiques de polymérisation par une méthode utilisant un pendule amorti - Partie 1 : température de début de réaction de polymérisation
NF EN 61788-10:2006 Supraconductivité - Partie 10 : mesure de la température critique - Température critique des composites supraconducteurs par une méthode par résistance
NF T46-082*NF ISO 11346:2014 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use
XP ISO/TS 289-4:2017 Caoutchouc non vulcanisé - Détermination utilisant un consistomètre à disque de cisaillement - Partie 4 : détermination du taux de relaxation de contrainte Mooney
NF EN ISO 18097:2022 Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Détermination de la température maximale de service

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Nylon service temperature

IPC TM-650 2.6.21-1988 Service Temperature of Flexible Printed Wiring

European Committee for Standardization (CEN), Nylon service temperature

EN 1111:1998 Sanitary Tapware - Thermostatic Mixing Valves (PN-10) - General Technical Specification
EN 1111:2017 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
EN 1111:2017/prA1:2021 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
EN ISO 18097:2022 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature (ISO 18097:2022)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Nylon service temperature

ASHRAE 4580-2002 Estimation of U.S. Design Temperatures Using Daily Maximum and Minimum Temperatures (RP-1171)
ASHRAE DA-00-3-2-2000 Direct Calculation of Mean Radiant Temperature Using Radiant Intensities
ASHRAE 3748-1994 Measurement of the Humidity Ratio of Moist Air Using a Thermo-Hygrometer
ASHRAE 4530-2002 Measurement of the Indoor Thermal Environment Using a Radiant Temperature Sensor
ASHRAE AT-96-4-4-1996 Using Blending Pumps to Increase Individual Facility Supply Water Temperatures and Total System Differential Temperatures
ASHRAE MN-00-7-1-2000 Surface Temperature Measurements Inside an Insulated Glazing Unit Using Liquid Crystals

未注明发布机构, Nylon service temperature

BS 1041-3:1989(2000) Temperature measurement — Part 3 : Guide to selection and use of industrial resistance thermometers
BS 1041-2.2:1989(2000) Temperature measurement — Part 2 : Expansion thermometers — Section 2.2 Guide to selection and use of dial - type expansion thermometers
BS 1041-7:1988(1999) Temperature measurement — Part 7 : Guide to selection and use of temperature / time indicators
BS 1041-2.1:1985(2007) Temperature measurement — Part 2 : Expansion thermometers — Section 2.1 Guide to selection and use of liquid - in - glass thermometers
BS 1041-5:1989(2000) Temperature measurement — Part 5 : Guide to selection and use of radiation pyrometers
BS 1041-4:1992(1999) Temperature measurement — Part 4 : Guide to the selection and use of thermocouples

Korean Agency for Technology and Standards (KATS), Nylon service temperature

KS M ISO 871:2019 Plastics — Determination of ignition temperature using a hot-air furnace
KS B ISO 386:2007 Liquid-in-glass laboratory thermometers－Principles of design, construction and use
KS M ISO 289-1-2017(2022) Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity
KS B ISO 386-2007(2022) Liquid-in-glass laboratory thermometers－Principles of design, construction and use
KS B ISO 386-2007(2017) Liquid-in-glass laboratory thermometers－Principles of design, construction and use
KS C IEC PAS 62240-2008(2018) Use of semiconductor devices outside manufacturers specified temperature range
KS M ISO 11346:2007 Rubber, vulcanized or thermoplastic－Estimation of life－time and maximum temperature of use
KS M ISO 11346:2017 Rubber, vulcanized or thermoplastic－Estimation of life－time and maximum temperature of use
KS M ISO 289-4:2019 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate

KR-KS, Nylon service temperature

KS M ISO 871-2019 Plastics — Determination of ignition temperature using a hot-air furnace
KS M ISO 289-4-2019 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate

ES-UNE, Nylon service temperature

UNE-ISO 289-1:2018 Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 1: Determination of Mooney viscosity
UNE-EN 14706:2012 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature (Endorsed by AENOR in February of 2013.)

SE-SIS, Nylon service temperature

SIS SS 14 25 70-1984 High-strength austenitic steel for use at elevated temperature
SIS SS 14 25 70-1984-1 High-strength austenitic steel for use at elevated temperature

HU-MSZT, Nylon service temperature

MSZ 7847-1962 Engine oil viscosity testing using a viscometer at 0C-ON and E temperatures

VN-TCVN, Nylon service temperature

TCVN 6090-1-2015 Rubber,unvulcanized - Determinations using a shearing-disc viscometer .Part 1:Determination of Mooney viscosity
TCVN 6090-1-2010 Rubber, unvulcanized.Determinations using a shearing-disc viscometer.Part 1: Determination of Mooney viscos

国家市场监督管理总局、中国国家标准化管理委员会, Nylon service temperature

GB/T 38426-2019 Test method for thermal resistance and use temperature of sleeping bags

RU-GOST R, Nylon service temperature

GOST 32271-2013 Petroleum asphalts. Determination of viscosity at elevated temperatures using a rotational viscometer
GOST 27895-1988 Rotating electrical machines. Built-in thermal protection. General rules for thermal protectors used in thermal protection systems
GOST 27917-1988 Rotating electrical machines. Built in thermal protection. Thermal detector and control units used in thermal protection systems
GOST R ISO 289-1-2017 Rubbers and rubber compounds. Tests using a shearing-disc viscometer. Part 1. Determination of Mooney viscosity
GOST 32175-2013 Tobacco and tobacco products. Determination of nicotine purity. Gravimetric method using tungstosilicic acid

IEC - International Electrotechnical Commission, Nylon service temperature

PAS 62204-2000 Standard Method for Measuring and Using the Temperature Coefficient of Resistance to Determine the Temperature of a Metallization Line (Edition 1.0)

Indonesia Standards, Nylon service temperature

SNI ISO 289-1:2012 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity

German Institute for Standardization, Nylon service temperature

DIN ISO 289-1:2018-12 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity (ISO 289-1:2015)
DIN ISO 13276:2021-01 Tobacco and tobacco products - Determination of nicotine purity - Gravimetric method using tungstosilicic acid (ISO 13276:2020)
DIN ISO 289-1:2018 Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity (ISO 289-1:2015)
DIN ISO/TS 13471-1:2022-01 Acoustics - Temperature influence on tyre/road noise measurement - Part 1: Correction for temperature when testing with the CPX method (ISO/TS 13471-1:2017)
DIN EN ISO 18097:2023-03 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature (ISO 18097:2022); German version EN ISO 18097:2022

CZ-CSN, Nylon service temperature

CSN 34 6552 Cast.3-1976 Insulating sleevings and tubings used at temperatures 105 °C, Type 312
CSN 34 6552 Cast.1-1976 Insulating sleevings and tubings used at temperatures 105 °C, Type 042
CSN 25 8103-1970 Glass thermometers. Meteorological glass thermometers for temperatures range -60 φC to +65 φC. Common regulations
CSN 65 6259-1986 Apparent viscosity of, motor oil at low emperature using the cold cranking si- ulátor
CSN 34 6551 Cast.1-1976 Insulating tubings and sleevings u?ed at temperatures below 90 °C, Type 041
CSN 25 8102-1965 Glass thermometers. Laboratory glass thermometers for temperature range from -80 φC to +400 φC. Common regulations
CSN 25 8105-1967 Glass thermometers with switch contacts for temperature range from — 35 CC to +360 °C. Common regulations

Association of German Mechanical Engineers, Nylon service temperature

DVS 2201-1 Beiblatt 5-2006 Service life temperature time limits due to thermal ageing

GOSTR, Nylon service temperature

GOST R 58888-2020 Soils. Field test method with the use of cone penetration with temperature measurement

VE-FONDONORMA, Nylon service temperature

NORVEN 55-5-1960 How to test the fineness of cotton fibers by using the Micronaire airflow fiber fineness tester

Professional Standard - Aviation, Nylon service temperature

HB 7686-2001 General specification for MJ thread self-locking nuts with service temperature higher than 425°C
HB 7595-1998 General specifications for self-locking nut with ＭＪthread and operating temperature no more than 425°Ｃ
HB 7595-2011 General specification for nuts, self-locking, with maximum operating temperature less than or equal to 425 ℃
HB 7596-1998 Test method for MJ threaded self-locking nuts when the service temperature is not higher than 425°C
HB 7687-2001 Test method for MJ threaded self-locking nuts used at temperatures above 425°C

API - American Petroleum Institute, Nylon service temperature

API MPMS 7.4-1993 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 4 - Static Temperature Determination Using Fixed Automatic Tank Thermometers
API MPMS 7.3-1985 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 3 - Static Temperature Determination Using Portable Electronic Thermometers (First Edition)
API MPMS 7.1-1991 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 1 - Static Temperature Determination Using Mercury-in-Glass Tank Thermometers (First Edition; Supersedes STD 2543)

American Society of Mechanical Engineers (ASME), Nylon service temperature

ASME SEC VIII D2 NMA APP E-2001 Appendix E - Nonmandatory Limiting Service Temperatures for Nonferrous Materials

GB-REG, Nylon service temperature

REG NASA-LLIS-1426-1998 Lessons Learned ?Cadmium-plated High-Strength Bolts Used in High Temperature Applications (1998)

Military Standard of the People's Republic of China-General Armament Department, Nylon service temperature

GJB 3580-1999 General specification for self-locking nuts with MJ threads for use at temperatures not higher than 425°C

Alliance of Telecommunications Industry Solutions （ATIS), Nylon service temperature

ATIS 0600010.01-2014 Temperature, Humidity, and Altitude Requiprements for Network Telecommunications Equipment Utilized in Outside Plant Environments
ATIS 0600010.01-2008 Temperature, Humidity, and Altitude Requiprements for Network Telecommunications Equipment Utilized in Outside Plant Environments Pre-Pub

National Association of Pipe Fabricators (NAPF), Nylon service temperature

PFI TB-1-2013 PRESSURE-TEMPERATURE RATINGS USED IN POWER PLANT PIPING SYSTEMS

AENOR, Nylon service temperature

UNE-ISO 289-1:2007 Rubber, unvulcanized. Determinations using a shearing-disc viscosimeter. Part 1: Determination of Mooney viscosity (ISO 289-1:2005)

CU-NC, Nylon service temperature

NC 90-14-30-1986 Metrological Assurance. Mercury and Mercury-Thallium Standard. Thermometers. Use and Conservation

International Electrotechnical Commission (IEC), Nylon service temperature

IEC PAS 62240:2001 Use of semiconductor devices outside manufacturer's specified temperature ranges

ESDU - Engineering Sciences Data Unit, Nylon service temperature

ESDU 97019 A-2010 Equilibrium temperatures in self-contained bearing assemblies (Use of computer program A9719)
ESDU 97019-1997 Equilibrium temperatures in self-contained bearing assemblies (use of computer program A9719).

American National Standards Institute （ANSI), Nylon service temperature

ANSI/EIA 4900:2002 Use of Semiconductor Devices Outside Manufacturers' Specified Temperature Ranges

Government Electronic & Information Technology Association, Nylon service temperature

GEIA-4900-2001 Use of Semiconductor Devices Outside Manufacturers?Specified Temperature Ranges
GEIA SP4900-2002 Use of Semiconductor Devices Outside Manufacturers?Specified Temperature Ranges Comment Period Expires: May 27, 2002; ANSI/EIA-4900

ATIS - Alliance for Telecommunications Industry Solutions, Nylon service temperature

0600010.01-2014 Temperature@ Humidity@ and Altitude Requiprements for Network Telecommunications Equipment Utilized in Outside Plant Environments

Lithuanian Standards Office , Nylon service temperature

LST EN 14706-2013 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature

Danish Standards Foundation, Nylon service temperature

DS/EN 14706:2013 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature