ZH
RU
ES

Bending strength test method

Bending strength test method, Total:499 items.

In the international standard classification, Bending strength test method involves: Construction materials, Wood, sawlogs and sawn timber, Measurement of force, weight and pressure, Wood-based panels, Semi-manufactures of timber, Ceramics, Kitchen equipment, Solar energy engineering, Mining and quarrying, Glass, Gears, Reinforced plastics, Rubber, Structures of buildings, Wood technology processes, Insulating fluids, Semiconducting materials, Iron and steel products, Refractories, Leather technology, Paper and board, Products of the textile industry, Veterinary medicine, Elements of buildings, Paints and varnishes, Piezoelectric and dielectric devices, Plastics, Adhesives, Protection of and in buildings, Welding, brazing and soldering, Materials for the reinforcement of composites, Testing of metals, Farming and forestry, Inorganic chemicals, Pipeline components and pipelines, Medical equipment, Fibre optic communications, Aerospace electric equipment and systems, Earthworks. Excavations. Foundation construction. Underground works, Non-ferrous metals, Seals, glands, Waxes, bituminous materials and other petroleum products, Microbiology, Integrated circuits. Microelectronics, Equipment for the metallurgical industry, Insulating materials, Insulation, Products of the chemical industry, Cellular materials, Road vehicle systems, Non-destructive testing, Semiconductor devices, Paper products, Road engineering, Resistors, Electricity. Magnetism. Electrical and magnetic measurements, Rubber and plastics products.

Lithuanian Standards Office , Bending strength test method

LST EN 14617-2-2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
LST EN 1533-2010 Wood flooring - Determination of bending strength under static load - Test methods
LST EN 1170-5-2003 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
LST EN 1170-4-2000 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
LST EN 12372-2007 Natural stone test methods - Determination of flexural strength under concentrated load
LST EN 14651+A1-2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
LST EN 1052-2-2000 Methods of test for masonry - Part 2: Determination of flexural strength
LST EN 13892-2-2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
LST EN 13161-2008 Natural stone test methods - Determination of flexural strength under constant moment
LST EN 820-1-2003 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermonechanical properties - Part 1: Determination of flexural strength at elevated temperatures

Danish Standards Foundation, Bending strength test method

DS/EN 14617-2:2009 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength
DS/EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
DS/EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, ""Complete bending test"" method
DS/EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, ""Simplified bending test"" method
DS/EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
DS 438.15:1984 Test method for the structural use of brickwork. Determination of the tensile strength in bending of brickwork
DS/EN 14651+A1:2008 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
DS/EN 1052-2:2002 Methods of test for masonry - Part 2: Determination of flexural strength
DS/EN 13892-2:2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
DS/EN 13161:2008 Natural stone test methods - Determination of flexural strength under constant moment
DS/EN 820-1:2003 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 1: Determination of flexural strength at elevated temperatures
DS/EN 62047-13:2012 Semiconductor devices - Micro-electromechanical devices - Part 13: Bend- and shear- type test methods of measuring adhesive strength for MEMS structures
DS/EN ISO 10272-1:2006 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 1: Detection method

German Institute for Standardization, Bending strength test method

DIN EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DIN 53864:1978 Testing of textiles; determination of the bending strength, method according to Schlenker
DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
DIN EN 1052-2:1999 Methods of test for masonry - Part 2: Determination of flexural strength; German version EN 1052-2:1999
DIN EN 14617-2:2016-09 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2016
DIN 53864:1978-08 Testing of textiles; determination of the bending strength, method according to Schlenker
DIN EN 1533:2010-12 Wood flooring - Determination of bending strength under static load - Test methods; German version EN 1533:2010
DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
DIN EN 1170-4:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997
DIN EN 1170-5:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; "complete bending test" method; German version EN 1170-5:1997
DIN EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
DIN EN 12372:2022-05 Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:2022
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 12372:1999 Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:1999
DIN EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load; English version of DIN EN 12372:2007-02
DIN 18555-3:1982 Testing of mortars containing mineral binders; hardened mortars; determination of flexural strength, compressive strength and bulk density
DIN EN 1052-2:2016 Methods of test for masonry - Part 2: Determination of flexural strength; German version EN 1052-2:2016
DIN EN 13892-2:2003-02 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength; German version EN 13892-2:2002
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods; German version EN 1533:2010
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51030:2015-01 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products
DIN EN 13161:2008-08 Natural stone test methods - Determination of flexural strength under constant moment; German version EN 13161:2008
DIN EN 772-6:2002 Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units; German version EN 772-6:2001
DIN EN 14651:2007-12 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual); German version EN 14651:2005+A1:2007
DIN EN 14651:2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual) (includes Amendment A1:2007); English version of DIN EN 14651:2007-12
DIN EN 1052-2:2018-12 Methods of test for masonry - Part 2: Determination of flexural strength; German version EN 1052-2:2016+AC:2017
DIN EN 1015-11:2007 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar(includes Amendment A1:2006) Englisg version of DIN EN 1015-11:2007-05
DIN 51944 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigendum to DIN 51944:1999-01
DIN ISO 11093-6:2005 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN EN 820-1:2003-01 Advanced technical ceramics - Methods of testing monolithic ceramics; Thermo-mechanical properties - Part 1: Determination of flexural strength at elevated temperatures; German version EN 820-1:2002
DIN EN 62047-13:2012-10 Semiconductor devices - Micro-electromechanical devices - Part 13: Bend- and shear- type test methods of measuring adhesive strength for MEMS structures (IEC 62047-13:2012); German version EN 62047-13:2012
DIN EN 60793-1-47:2008 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss (IEC 60793-1-47:2006); German version EN 60793-1-47:2007
DIN EN ISO 9073-7:1998-10 Textiles - Test methods for non-wovens - Part 7: Determination of bending length (ISO 9073-7:1995); German version EN ISO 9073-7:1998
DIN EN ISO 10272-1:2006 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 1: Detection method (ISO 10272-1:2006); English version of DIN EN ISO 10272-1:2006-04

RU-GOST R, Bending strength test method

GOST 16483.3-1984 Wood. Method of static bending strength determination
GOST 19921-1974 Glued and bent blanks. Method of determining ultimate strength in static bending
GOST 26406-1984 Porcelain and faience ware. Method for determination of bending resistance
GOST 21153.6-1975 Rocks. Method for the determination of bend strength limit
GOST 255-1990 Ebonite. Determination of cross-breaking strength
GOST 21554.3-1982 Sawn timber and blanks. Method for control of strength at bending, tension and compression
GOST 30271-1996 Paper and board. Determination of bending stiffness. Resonance method
GOST R 52740-2007 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST 10635-1988 Particle boards. Methods for determinining of ultimate strength and modulus of elasticity in bendind
GOST 26798.2-1996 I-G and I-H well cement. Test methods
GOST 26798.2-1985 Oil-well cements. Test methods of strength limits in bending and compression
GOST 9625-1987 Laminated glued wood. Method for determination of strength and elasticity module in static bending
GOST 31974-2012 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
GOST R 57350-2016 Masonry. Method for determination of flexural strength
GOST 9582-1975 Paper and board. Method for determination of rigidity in static bending
GOST 15613.4-1978 Glued massive wood. Methods for determining the ultimate strength of serrate glued joints in static bending
GOST 24036-1980 Seal sheet materials, asbestos polymer. Method of test for folding resistance
GOST ISO 2493-1996 Paper and board. Method for determination of resistance to bending
GOST 30435-1996 Paper and board. Determination of bending stiffness by static methods. General principles
GOST R EN 12089-2008 Thermal insulating products for building applications. Method for determination of bending behaviour
GOST 23775-1979 Carbon products. Methods of determination for compressive, bend, tensile, strengths (diametral compression)
GOST R 57732-2017 Polymer composites. Determination of strength of adhesive bonded joints using a bending-shear method
GOST 28791-1990 Rubber- or plastics-coated fabrics. Determination of resistance to damage by flexing (dynamic method)
GOST 8462-1985 Wall materials. Methods for determination of ultimate compressive and bending strength
GOST R 57338-2016 Mortars for masonry. Method of determination of flexural and compressive strength
GOST ISO 10272-1-2013 Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of Campylobacter spp. Part 1. Detection method
GOST 9900-1985 Inorganic glass and glasscrystal materials. Methods for the determination of elastic module at cross static bending
GOST 25085-1981 Refractories. Method of determination for strength under bending at elevated temperatures
GOST 21395.7-1975 Resistors variable. Test method for stop strength

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Bending strength test method

GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
GB/T 1965-1996 Test method for cross-bending strength of porous ceramic
GB/T 6569-1986 Testing method for flexural strength of high performance ceramics
GB/T 14230-1993 Standard of test methed for bending load capacity of gears
GB 6569-1986 Testing method for flexural strength of high performance ceramics
GB/T 6569-2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
GB/T 4741-1999 Standard test method for bending strength of ceramic materials
GB/T 6619-1995 Test methods for bow of silicon slices
GB/T 6619-2009 Test method for bow of silicon wafers
GB/T 14390-1993 Test method for flexural strength of high performance ceramics at elevated temperature
GB/T 14390-2008 Fine ceramics (advanced ceramics,advanced technical ceramics).Test methos for flexural strength of monolithic ceramics at elevated temperature
GB/T 41627-2022 Detection method of Campylobacter jejuni from animal samples
GB/T 11387-2008 Test methods for the properties of piezoelectric ceramics.Test for the static flexural strength
GB/T 11387-1989 Testing methods for static flexural strength of piezoelectric ceramics
GB/T 15615-1995 Test method for measuring flexture strength of silicon slices
GB/T 14926.49-2001 Laboratory animal--Method for examination of Campylobacter jejuni
GB/T 31353-2014 Test methods for bow of sapphire substrates
GB/T 8805-1988 Determination of deflection for rigid plastic pipes
GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method
GB/T 42667-2023 Test method for iso-biaxial bending strength of fine ceramics at room temperature Double ring method
GB/T 7689.4-2001 Reinforcements--Test method for woven fabrics Part 4: Determination of flexural stiffness
GB/T 7689.4-2013 Reinforcements.Test method for woven fabrics.Part 4: Determination of flexural stiffness
GB/T 42895-2023 Bending strength test method of microelectromechanical system (MEMS) technology silicon-based MEMS microstructure
GB/T 14235.2-1993 Testing methods for bending strength of pattern materials in investment casting
GB/T 9966.2-2001 Test methods for natural facing stones Part 2: Dry and wet test methods for flexural strength
GB/T 10062.3-2003 Calculation of load capacity of bevel gear--Part 3:Calculation of tooth root strength
GB/T 41852-2022 Semiconductor devices—Micro-electromechanical devices—Bend-and shear-type test methods of measuring adhesive strength for MEMS structures
GB/T 9966.2-2020 Test methods for natural stone—Part 2:Determination of dry,wet and after freezing flexural strength

British Standards Institution (BSI), Bending strength test method

BS EN 14617-2:2016 Tracked Changes. Agglomerated stone. Test methods. Determination of flexural strength (bending)
BS EN 14617-2:2004 Agglomerated stone-Test methods-Part 2:Determination of flexural strength(bending)
BS 3356:1990 Method for determination of bending length and flexural rigidity of fabrics
BS EN 12372:2006 Natural stone test methods — Determination of flexural strength under concentrated load
BS EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
BS DD 86-1:1983 Damp-proof courses - Methods of test for flexural bond strength and short term shear strength
BS EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength - 'Simplified bending test' method
BS EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength, "complete bending test" method
BS EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
BS ISO 4604:2011 Reinforcement fabrics. Determination of conventional flexural stiffness. Fixed-angle flexometer method
21/30403937 DC BS EN 12372. Natural stone test methods. Determination of flexural strength under concentrated load
BS 3531-23.1:1991 Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness
BS EN 2591-416:2001 Elements of electrical and optical connection - Test methods - Contact bending strength
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS EN 12372:2022 Tracked Changes. Natural stone test methods. Determination of flexural strength under concentrated load
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS EN 1015-11:1999 Methods of test for mortar for masonry - Determination of flexural and compressive strength of hardened mortar
BS 7034-4:1988 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by beam bending
BS 6663:1986 Methods for determination of crimp rigidity of textured nylon yarns
BS 3531 Sec.23.1:1991 Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness
BS EN 772-6:2001 Methods of test for masonry units - Determination of bending tensile strength of aggregate concrete masonry units
BS 7034-4:1989 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by beam bending
BS EN ISO 10272-1:2006 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campulobacter spp - Detection method
BS EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
BS EN ISO 10272-1:2017+A1:2023 Microbiology of the food chain. Horizontal method for detection and enumeration of Campylobacter spp - Detection method. Inclusion of methods for molecular confirmation and identification of thermotolerant Campylobacter spp, the use of growth…
BS EN 14651:2005+A1:2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
BS EN 14651:2005+A1:2007(2008) Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
BS 1881-119:1983 Testing concrete - Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)
BS 1881-119:2011 Testing concrete. Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)
BS EN ISO 10272-1:2017 Microbiology of the food chain. Horizontal method for detection and enumeration of Campylobacter spp. Detection method
BS EN ISO 9073-7:1998 Textiles. Test methods for nonwovens. Determination of bending length
BS EN 1015-11:2019 Methods of test for mortar for masonry - Determination of flexural and compressive strength of hardened mortar
BS EN 1052-2:1999 Methods of test for masonry - Determination of flexural strength
BS EN 1052-2:2016 Methods of test for masonry. Determination of flexural strength
BS ISO 21712:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural bond strength of ceramics
17/30345383 DC BS ISO 2100-416. Aerospace elements of electrical and optical connection. Test methods. Part 416. Contact bending strength
BS EN 846-11:2000 Methods of test for ancillary components for masonry - Determination of dimensions and bow of lintels
21/30389674 DC BS EN ISO 10272-1 AMD1. Microbiology of the food chain. Horizontal method for detection and enumeration of Campylobacter spp.. Part 1. Detection method

Group Standards of the People's Republic of China, Bending strength test method

T/CSEB 0002-2018 Testing method for determining dynamic bending strength of rock materials by the Semi-circular Bending specimen
T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/SSEA 0069-2020 Measuring method of bending degree of bar
T/CSAE 155-2020 U-shaped constant bending load test method for hydrogen induced delayed fracture sensitivity of ultra high strength automobile steel plate

Standard Association of Australia （SAA）, Bending strength test method

AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
AS/NZS 4266.5/AMD 1:2006 Amendment No.1 to AS/NZS 4266.5-2004 Reconstituted wood-based panels--Methods of test Part 5: Modulus of elasticity in bending and bending strength
AS/NZS 4266.10(Int):2001 Reconstituted wood-based panels - Methods of test - Wet bending strength after immersion in water at 70 degrees Celsius or boiling temperature
AS 4143.5:1993 Methods of test for fibre ropes - Resistance to flexion and surface abrasion
AS 2498.4:1993 Methods of testing rigid cellular plastics - Determination of cross-breaking strength
AS/NZS 4257.9:1995 Plastic roof and wall cladding materials - Methods of test - Determination of transverse bending stiffness
AS/NZS 1301.453:2016 Methods of test for pulp and paper, Method 453: Determination of bending resistance — Constant rate of deflection

Association Francaise de Normalisation, Bending strength test method

NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
NF EN ISO 5402-2:2018 Cuir - Détermination de la résistance à la flexion - Partie 2 : méthode de flexion d'empeigne
NF EN ISO 17707:2005 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance à la flexion
NF P19-829-4*NF EN 1170-4:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, ""Simplified bending test"" method."
NF P12-702-2*NF EN 1052-2:2016 Methods of test for masonry - Part 2 : determination of flexural strength
NF EN ISO 5402-1:2022 Cuir - Détermination de la résistance à la flexion - Partie 1 : méthode au flexomètre
NF EN 13161:2008 Méthodes d'essai pour pierres naturelles - Détermination de la résistance en flexion sous moment constant
NF EN 14617-2:2016 Pierre agglomérée - Méthodes d'essai - Partie 2 : détermination de la résistance à la flexion (traction)
NF EN ISO 17694:2016 Chaussures - Méthodes d'essai pour les tiges et les doublures - Résistance à la flexion
NF B10-621*NF EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
NF EN 14651+A1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la résistance à la traction par flexion (limite de proportionnalité (LOP), résistance résiduelle)
NF EN 14651/IN1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la résistance à la traction par flexion (limite de proportionnalité (LOP), résistance résiduelle)
NF P19-829-5*NF EN 1170-5:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 5 : measuring bending strength, ""Complete bending test"" method.".
NF B10-602-2:2008 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending).
NF G52-030:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method.
NF EN 13892-2:2003 Méthodes d'essai des matériaux pour chapes - Partie 2 : détermination de la résistance à la flexion et à la compression
NF P19-212*NF EN 14651+A1:2007 Test method for metallic fibered concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual).
NF V08-026-1*NF EN ISO 10272-1:2017 Microbiology of the food chain - Horizontal method for detection and enumeration of Campylobacter spp. - Part 1 : detection method
NF EN 1052-2:2016 Méthodes d'essai de la maçonnerie - Partie 2 : détermination de la résistance à la flexion
NF P12-311/A1:2007 Methods of test for mortar for masonry - Part 11 : determination of flexural and compressive strength of hardened mortar.
NF EN 3745-512:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 512 : résistance à la flexion
NF P14-204-2*NF EN 13892-2:2003 Methods of test for screed materials - Part 2 : determination of flexural and compressive strength
NF P12-702:2000 Methods of test for masonry - Part 2 : determination of flexural strength.
NF P12-106*NF EN 772-6:2002 Methods of test for masonry units - Part 6 : determination of bending tensile strength of aggregate concrete masonry units
NF B10-621:2007 Natural stone test methods - Determination of flexural strength under concentrated load.
NF B53-643*NF EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
NF EN 62047-13:2012 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 13 : méthodes d'essais de types courbure et cisaillement de mesure de la résistance d'adhérence pour les structures MEMS
NF EN 820-1:2003 Céramiques techniques avancées - Méthode d'essai des céramiques monolithiques - Propriétés thermomécaniques - Partie 1 : détermination de la résistance à la flexion à températures élevées
NF EN 61063:2003 Céramiques techniques avancées - Méthode d'essai des céramiques monolithiques - Propriétés thermomécaniques - Partie 1 : détermination de la résistance à la flexion à températures élevées
NF EN 1186-13:2003 Céramiques techniques avancées - Méthode d'essai des céramiques monolithiques - Propriétés thermomécaniques - Partie 1 : détermination de la résistance à la flexion à températures élevées
XP CEN/TS 14234:2003 Céramiques techniques avancées - Méthode d'essai des céramiques monolithiques - Propriétés thermomécaniques - Partie 1 : détermination de la résistance à la flexion à températures élevées
NF EN 2746:1998 Série aérospatiale - Plastiques renforcés au verre textile - Essai de flexion. Méthode des trois pannes.
NF Q03-048:1971 Paper and board tests. Method to determine the stiffness of paper and board by static bending.
NF EN ISO 9073-7:1998 Textiles - Méthodes d'essai pour non-tissés - Partie 7 : détermination de la longueur de flexion
NF B38-206:1980 Textiles glass. Woven fabrics. Determination of conventional flexural stifness. Fixed angle flexometer method.

国家市场监督管理总局、中国国家标准化管理委员会, Bending strength test method

GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
GB/T 37781-2019 Test methods for bending strength of glass
GB/T 14230-2021 Test method of tooth bending strength for gear load capacity
GB/T 38898-2020 Non-destructive testing—Testing method for measuring coating bond strength using ultrasonic wave
GB/T 38947-2020 Magnetic flux density test method for magnetic separators

VN-TCVN, Bending strength test method

TCVN 3119-1993 Heavy weight concrete.Method for the determination of flexural strength
TCVN 4032-1985 Cements.Test methods of bending and compression strengths
TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength
TCVN 6355-3-2009 Bricks.Test methods.Part 3: Determination of bending strength.
TCVN 7715-1-2007 Microbiology of food and animal feeding stuffs.Horizontal method for detection and enumeration of Campylobacter spp.Part 1: Detection method

未注明发布机构, Bending strength test method

BS 3356:1990(1999) Method for Determination of bending length and flexural rigidity of fabrics
BS 1881-118:1983(1998) Testing concrete — Part 118 : Method for determination of flexural strength
BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength
BS 2782-10-Method 1008B:1996(1999) Methods of testing Plastics — Part 10 : Glass reinforced plastics — Method 1008B : Determination of flexural strength on rods made of roving - reinforced resin
DIN EN 1015-11:1999 Test method for mortar for masonry DIN Part 11: Determination of bending tensile and compressive strength
BS EN 1052-2:2016(2017) Methods of test for masonry Part 2 : Determination of flexural strength
BS EN 820-1:2002(2003) Advanced technical ceramics — Methods of testing monolithic ceramics — Thermomechanical properties — Part 1 : Determination of flexural strength at elevated temperatures

HU-MSZT, Bending strength test method

Indonesia Standards, Bending strength test method

SNI 03-6851-2002 Test method for structural wood panel flexibility
SNI 03-3975-1995 Test method of bending strength of structural size construction woods
SNI 07-3806-1995 Bending test method for butt-welded joints
SNI 04-0683-1989 Low voltage ceramic insulators, Body mass bending and impact strength
SNI ISO 10272-1:2012 Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk deteksi dan enumerasi - Campylobacter spp.- Bagian 1: Metode deteksi
SNI 4154-2014 Standard test method for flexural strength of concrete (using simple beam with center-point loading)
SNI 03-6758-2002 Test method for compressive strength of asphalt mixture

Korean Agency for Technology and Standards (KATS), Bending strength test method

KS L 1591-2013 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
KS L 1591-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test method for flexural strength of monolithic ceramics at room temperature
KS F 2566-2014 Standard test method for flexural performance of fiber reinforced concrete
KS F 2208-2004 Method of bending test for wood
KS F 2566-2000 Test method for flexural toughness of steel fiber reinforced concrete
KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
KS F 2211-2004 Method of impact bending test for wood
KS F 2413-2020 Standard test method for compressive strength of concrete after flexural strength test
KS M ISO 15108-2009(2019) Adhesives－Determination of strength of bonded joints using a bending-shear method
KS F 2413-2015 Method of test for compressive strength of concrete using portions of beams broken in flexure
KS M ISO 22288:2008 Leather-Physical and mechanical tests-Determination of flex resistance by the vamp flex method
KS D 0259-2012(2022) Methods of measurement of thickness,thickness variation and bow for silicon wafer
KS F 2150-2004 Method of static bending test for full sized structural lumber
KS M 7123-1993 Testing Method for Stiffness of Paper by Bending Load
KS F 2232-2016 Testing method for bending strength of polystyrene composite wood wool cement boards
KS F 2408-2000 Method of test for flexural strength of concrete
KS F 2326-2002(2017) Testing method for compressive strength of soil－cement using portions of beam broken in flexure
KS D 0259-2012 Methods of measurement of thickness,thickness variation and bow for silicon wafer
KS M ISO 15108:2009 Adhesives－Determination of strength of bonded joints using a bending-shear method
KS F 2483-2014 Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure
KS F 2413-1995 Testing method for compressive strength of concrete using portions of beams broken in flexure
KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS J ISO 10272-1:2020 Microbiology of the food chain — Horizontal method for detection and enumeration of Campylobacter spp. — Part 1: Detection method1：Detection method
KS F 2390-2019 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 458-1:2007 Plastics－Determination of stiffness in torsion of flexible materials－Part 1：General method
KS F 2413-2000 Method of test for compressive strength of concrete using portions of beams broken in flexure
KS F 2325-2002 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2325-1982 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS K ISO 9073-7:2010 Textiles-Test methods for nonwovens-Part 7:Determination of bending length
KS K ISO 9073-7:2015 Textiles－Test methods for nonwovens－Part 7：Determination of bending length
KS J ISO 10272-1:2007 Microbiology of food and animal feeding stuffs－Horizontal method for detection and enumeration of Campylobacter spp.－Part 1：Detection method
KS L ISO 17565-2006(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for flexural strength of monolithic ceramics at elevated temperature

Japanese Industrial Standards Committee (JISC), Bending strength test method

JIS A 1106:1993 Method of test for flexural strength of concrete
JIS R 1624:1995 Testing method for bending strength of fine ceramic joint
JIS R 1624:2010 Testing method for bending strength of fine ceramic joint
JIS R 1664:2004 Testing method for bending strength of porous fine ceramics
JIS A 1114:1993 Method of test for compressive strength of concrete using portions of beams broken in flexure
JIS K 7074:1988 Testing methods for flexural properties of carbon fiber reinforced plastics
JIS H 0611:1994 Methods of measurement of thickness, thickness variation and bow for silicon wafer
JIS R 1663:2004 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites
JIS K 7096:2017 Test method for through-thickness tensile properties of carbon fibre reinforced plastics -- Flexure method
JIS A 1183:1995 Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure
JIS K 6545:1994 Testing method for flexing endurance of light leathers and their surface finishes
JIS R 1663:2017 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites at room temperature

Professional Standard - Building Materials, Bending strength test method

JC/T 676-1997 Test method for flexure of glass material
JC/T 263-1993 Performance test method for cast stone products. Bending strength test

American Society for Testing and Materials (ASTM), Bending strength test method

ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880-98 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880-06 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-15 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM D7914/D7914M-14 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E518-03 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D1184-98(2020) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM C1684-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
ASTM C1161-02a Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-02c Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-02b Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM E518-02 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM F417-78(1996) Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM F394-78(1996) Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)
ASTM C1161-02c(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D6415/D6415M-06ae1 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-06 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM C1499-02 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C149-86(2000) Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM C1499-08 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1899-21 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM C1495-16(2023) Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM C1495-16 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM D4032-94 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D4032-94(2001) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D4032-08 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D4032-08(2012) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D4032-08(2016) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D4338-97(2004) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D648-04 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-07 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D1634-00(2006) Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM D1634-00 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM D1634-17 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM D790-15e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D790-00 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D790-02 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D648-06 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C651-91(2005)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-91(2010)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-20 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-11 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-13 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-15 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM F3260-17 Standard Test Method for Determining the Flexural Stiffness of Medical Textiles
ASTM F3260-18 Standard Test Method for Determining the Flexural Stiffness of Medical Textiles
ASTM C1072-00a Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C1072-19 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-12 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-22 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-13e1 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-11 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-13 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1674-23 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
ASTM C1072-05 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C1072-05b Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C1072-05a Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C158-02(2012) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1341-13(2023) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C349-02 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
ASTM C349-08 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
ASTM C349-18 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending

CZ-CSN, Bending strength test method

CSN 49 0147-1989 Tests of wood based panels. Method of apparent modulus of elasticity in bending and of bending strength determination
CSN 77 0241-1968 Method of determining the durabi- lity (brittleness) of packaging foils (Stress-flex method)
CSN 34 6314-1985 Testing of ceramic electrotechnic materials. Method of the determination of the bending strenght
CSN 34 6315-1984 Testing of ceramic elektrotechnic materials. Method of the determination of the impulse flexural strenght

Professional Standard - Aviation, Bending strength test method

HB 5434.6-1989 Method for determination of standard flexural strength of aircraft wheel brakes
HB 5295-1984 Kiscc test method for cantilever-bending pre-cracked specimens of high-strength alloys
HB 5434.6-2004 Test methods for aircraft wheel friction materials-Part 6:Test method for bend strength
HB 5350.3-1986 Method for determination of flexural strength of investment casting mold materials
HB 5352.1-1986 Method for Determination of Bending Strength of Investment Casting Shells
HB 5353.3-1986 Method for Determination of Bending Strength of Investment Casting Ceramic Cores

ES-UNE, Bending strength test method

UNE-EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
UNE-EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
UNE-EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
UNE-EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
UNE-EN ISO 10272-1:2018 Microbiology of the food chain - Horizontal method for detection and enumeration of Campylobacter spp. - Part 1: Detection method (ISO 10272-1:2017)
UNE 83519:2023 Concrete with fibres. Test method for the characterization of the flexural tensile strength of strain hardened concretes.
UNE-EN 2591-416:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength. (Endorsed by AENOR in April of 2002.)
UNE-EN 820-1:2002 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermonechanical properties - Part 1: Determination of flexural strength at elevated temperatures
UNE-EN 62047-13:2012 Semiconductor devices - Micro-electromechanical devices - Part 13: Bend- and shear- type test methods of measuring adhesive strength for MEMS structures (Endorsed by AENOR in June of 2012.)
UNE-EN 772-6:2002 Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units.
UNE-EN 1052-2:2018 Methods of test for masonry - Part 2: Determination of flexural strength. (Consolidated versión)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Bending strength test method

PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)
PREN 2591-D16-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D16 - Contact Bending Strength (Issue P 1)

Professional Standard - Automobile, Bending strength test method

QC/T 637-2000 Automobile engine crankshaft bending fatigue strength test method

European Committee for Standardization (CEN), Bending strength test method

EN 993-7:1998 Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures
EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
EN 1052-2:1999 Methods of Test for Masonry - Part 2: Determination of Flexural Strength
EN 12372:2006 Natural stone test methods - Determination of flexural strength under concentrated load
FprEN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load
EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method [Superseded: CEN EN 13335]
EN 1170-5:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
EN 1170-4:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
EN 1052-2:2016/AC:2016 Methods of test for masonry - Part 2: Determination of flexural strength
prEN 772-6-1992 Methods of test for masonry units; part 6: determination of bending tensile strength of concrete masonry units
EN 1288-1:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 1: Fundamentals of Testing Glass
EN 14651:2005+A1:2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
EN 993-6:1995 Methods of test for dense shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperatur
EN 2591-416:2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength
EN 1052-2:2016 Methods of test for masonry - Part 2: Determination of flexural strength
EN ISO 10272-1:2017 Microbiology of the food chain - Horizontal method for detection and enumeration of Campylobacter spp. - Part 1: Detection method

Professional Standard - Aerospace, Bending strength test method

QJ 2199-1991 Test method for flexural strength of rigid foamed plastics

YU-JUS, Bending strength test method

JUS D.A1.046-1979 Testing ofwood. Determination ofuttimate strength in static bending
JUS G.S2.630-1991 Plastics. Determination of stiffness in torsion of flexible materials. General method

AENOR, Bending strength test method

UNE-EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
UNE-EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
UNE-EN 14651:2007+A1:2008 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
UNE-EN 1052-2:2000 METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH
UNE-EN 13892-2:2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
UNE-EN 13161:2008 Natural stone test methods - Determination of flexural strength under constant moment

Guangdong Provincial Standard of the People's Republic of China, Bending strength test method

DB44/T 1100.2-2012 Test methods for artificial stone: Part 2 Determination of bending strength

NZ-SNZ, Bending strength test method

AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)

Professional Standard - Chemical Industry, Bending strength test method

HG/T 4283-2011 Testing method for bending of plastic welding specimens

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Bending strength test method

GB/T 35160.2-2017 Test methods for agglomerated stone—Part 2：Determination of flexural strength

International Organization for Standardization (ISO), Bending strength test method

ISO 5402-2:2015 Leather - Determination of flex resistance - Part 2: Vamp flex method
ISO 4604:2011 Reinforcement fabrics - Determination of conventional flexural stiffness - Fixed-angle flexometer method
ISO 15108:1998 Adhesives - Determination of strength of bonded joints using a bending-shear method
ISO 22288:2006 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
ISO 21712:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural bond strength of ceramics
ISO 11093-6:2005 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method
ISO 11093-6:1996 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method
ISO 9073-7:1995 Textiles - Test methods for nonwovens - Part 7: Determination of bending length
ISO 10272-1:2006 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 1: Detection method
ISO 10272-1:2017 Microbiology of the food chain - Horizontal method for detection and enumeration of Campylobacter spp.- Part 1:Detection method

CEN - European Committee for Standardization, Bending strength test method

EN 12372:1999 Natural Stone Test Methods - Determination of Flexural Strength Under Concentrated Load
EN 14617-2:2004 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN 993-6:2018 Methods of test for (dense) shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperature

IN-BIS, Bending strength test method

AT-ON, Bending strength test method

OENORM EN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load

Professional Standard - Commodity Inspection, Bending strength test method

SN/T 0175-2010 Detection of Campylobacter spp. in food for import and export
SN/T 3639-2013 Determination of Campylobacter jejuni in food for export.Real-time PCR method
SN/T 3728-2013 Rapid determination of Campylobacter jejuni in food for export.Quantum dots immuno-fluorescence method

Professional Standard - Light Industry, Bending strength test method

QB/T 2803-2006 Method for measuring bending degree of rigid plastic pipes

American National Standards Institute （ANSI), Bending strength test method

ANSI/TIA-455-111-A-2003 Procedure for the Measurement of Optical Fiber Curl

KR-KS, Bending strength test method

KS F 2326-2022 Test method for compressive strength of soil cement using portions of beam broken in flexure
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS J ISO 10272-1-2020 Microbiology of the food chain — Horizontal method for detection and enumeration of Campylobacter spp. — Part 1: Detection method1：Detection method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS K ISO 9073-7-2015 Textiles－Test methods for nonwovens－Part 7：Determination of bending length

AGMA - American Gear Manufacturers Association, Bending strength test method

93FTMS1-1993 Spur Gear Bending Strength Geometry Factors: A Comparison of AGMA and ISO Methods

The American Road & Transportation Builders Association, Bending strength test method

AASHTO T 140-1997(R2009) Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
AASHTO T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
AASHTO T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
AASHTO TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)

AASHTO - American Association of State Highway and Transportation Officials, Bending strength test method

T 140-1997 Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 177-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2004 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP 125-2016 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2003 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2005 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2012 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1998 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1997 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 368-2017 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot-Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)
TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)
TP1-1993 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) (Edition 1B)
T177-1997 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading) (Twentieth Edition; ASTM C293-94)

工业和信息化部, Bending strength test method

JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method
JC/T 2405-2017 Test method for flexural strength of continuous fiber reinforced ceramic matrix composites at room temperature

Aerospace, Security and Defence Industries Association of Europe (ASD), Bending strength test method

ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

European Association of Aerospace Industries, Bending strength test method

AECMA PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending Edition P1

TR-TSE, Bending strength test method

TS 3287-1979 STANDARD METHOD OF TEST FOR COMPRESSIVE STRENGTH OF CONCRETE USING PORTIONS OF BEAMS BROKEN IN FLEXURE

CU-NC, Bending strength test method

NC 10-27-1984 Powder Metallurgy. Determination of Plexural Strength. Testing Method

GOSTR, Bending strength test method

GOST R 58527-2019 Wall materials. Methods for determination of ultimate compressive and bending strength
GOST 34510-2018 Transmission tooth gears of the traction main railway stock. Methods for determination of bending and contact fatigue strength

(U.S.) Telecommunications Industries Association , Bending strength test method

TIA TSB62-13-2000 ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending

SE-SIS, Bending strength test method

SIS SS-ISO 4604:1989 Textile glass — Woven fabrics — Determi- nation of conventional flexural stiffness — Fixed-angle flexometer method

BE-NBN, Bending strength test method

NBN 927-1971

SG-SPRING SG, Bending strength test method

SS 78 Pt.A19-1987 Testing Concrete Part A19 : Method For Determination Of Compressive Strength Using Portions Of Beams Broken In Flexure (Equivalent Cube Method)
SS 78 Pt.A18-1987 Testing Concrete Part A18 : Method For Determination Of Flexural Strength

PL-PKN, Bending strength test method

PN C05011-09-1988 Test methods of conveyer belts fati?ue Determination flexure strength

IT-UNI, Bending strength test method

Society of Automotive Engineers (SAE), Bending strength test method

SAE J949-2003 Test Method for Determining Stiffness (Modulus of Bending) of Interior Trim Materials and Substrates

SAE - SAE International, Bending strength test method

SAE J949-1981 Test Method for Determining Stiffness (Modulus of Bending) of Fiberboards@ Standard (August 1981)

PT-IPQ, Bending strength test method

NP EN 1170-4-2000 Precast concrete products. Test method for glass-fibre reinforced cement Part 4:Measuring bending strength,"Simplified bending test"method
NP EN ISO 9073-7:2000 Textiles Test methods for nonwovens Part 7:Determination of bending length(ISO 9073-7:1995)

Professional Standard - Agriculture, Bending strength test method

309药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4008 Determination of heat seal strength
305药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4004 Determination of peel strength

ES-AENOR, Bending strength test method

UNE 49 401 h20

Xinjiang Provincial Standard of the People's Republic of China, Bending strength test method

DB65/T 4166-2018 Test method for the length and strength of wool bundles of sheep wool—Quick detection of wool bundle length and strength—Body test method

GM Daewoo, Bending strength test method

GMKOREA EDS-T-7660-2011 Test Method for Determining the Bending Strength of Chipboards and Similar Materials