ZH
RU
ES

Primary antibody secondary antibody mix

Primary antibody secondary antibody mix, Total:499 items.

In the international standard classification, Primary antibody secondary antibody mix involves: Microbiology, Products of the textile industry, Chipless working equipment, Road engineering, Semiconductor devices, Cereals, pulses and derived products, Raw materials for rubber and plastics, Construction materials, Materials for aerospace construction, Fertilizers, Earthworks. Excavations. Foundation construction. Underground works, Rubber and plastics products, Protection against fire, Construction industry, Structures of buildings, Waxes, bituminous materials and other petroleum products, Iron and steel products, Protection of and in buildings, Analytical chemistry, Products of the chemical industry, Equipment for petroleum and natural gas industries, Measurement of force, weight and pressure, Veterinary medicine, Farming and forestry, Fasteners, Road vehicles in general, Pesticides and other agrochemicals, Transformers. Reactors, Adhesives, Optics and optical measurements, Environmental testing, Welding, brazing and soldering, Galvanic cells and batteries, Elements of buildings.


ZA-SANS, Primary antibody secondary antibody mix

  • SANS 5484:2009 Resistance to fungal attack by mixed fungi
  • SANS 5484:1981 Resistance to fungal attack by mixed fungi
  • SANS 1465-2:1988 Steel castings for general engineering applications Part 2: Wear-resistant carbon and low alloy steel castings

GM North America, Primary antibody secondary antibody mix

  • GM GM9328P-1989 Mildew Resistance - Mixed Culture Method
  • GMP.PVC.007-1990 PVC - 80 Shore A, Weatherable, Integral Colored, Extrusion Molding Compound Revision A [Replaced: GMNA GMP.PVC.010, GMNA GMP.PVC.010]

Professional Standard - Agriculture, Primary antibody secondary antibody mix

VN-TCVN, Primary antibody secondary antibody mix

RU-GOST R, Primary antibody secondary antibody mix

  • GOST 23409.7-1978 Moulding sands, moulding and core sand mixtures. Methods for determination of compressive, tensile, bending and shearing strength
  • GOST R 50130-1992 Textiles. Cloth. Methods for determination of resistance to blend
  • GOST 19656.12-1976 Semicondactor UHF mixer diodes. Measurement method of input impedance
  • GOST 23409.16-1978 Moulding sand mixtures. Method for determination of tensile strength limit in moisture condensation zone
  • PNST 181-2016 Automobile roads of general use. Road hot asphalt mixtures and asphalt concrete. Method for determining the resistance to rutting by rolling a loaded wheel
  • PNST 135-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the fatigue strength under repeated bending
  • GOST 23409.8-1978 Moulding and core sand mixtures. Method for determination of compressive strength limit at high temperatures
  • PNST 109-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method for determination of resistance to plastic flow of cylindrical samples at Marshall installation
  • PNST 179-2016 Road hot asphalt mixtures and asphalt concrete. Method for determination of bending tensile strength and ulimate relative tensile strain
  • GOST 9.802-1984 Unified system of corrosion and ageing protection. Textiles and products of natural, artificial, synthetic fibres and its mixtures. Test method for fungous resistance

CZ-CSN, Primary antibody secondary antibody mix

Group Standards of the People's Republic of China, Primary antibody secondary antibody mix

  • T/CSRA 4-2020 Anti-rutting Agent for Highway Asphalt Mixture
  • T/CI 085-2023 Deicing Material for Asphalt Mixture in Highway
  • T/CECS 10001-2017 Anti-crack and anti-permeability composite materials used for concrete
  • T/CECS 10001-2019 Anti-crack and anti-permeability composites used in concrete
  • T/QGCML 964-2023 Preparation method of rigid polymer fiber for crack resistance of concrete
  • T/CECS CECS 474-2017 Technical specification for application of anti-crack and anti-permeability composites used for concrete
  • T/CECS 02-2020 Technical specification for testing concrete compressive strength by ultrasonic rebound comprehensive method

British Standards Institution (BSI), Primary antibody secondary antibody mix

  • BS EN 12697-43:2014 Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fuel
  • BS EN 12697-43:2005 Bituminous mixtures - Test methods for hot mix asphalt - Resistance to fuel
  • BS PD CEN/TS 12697-50:2016 Bituminous mixtures. Test methods. Resistance to scuffing
  • BS PD CEN/TS 12697-50:2018 Bituminous mixtures. Test methods. Resistance to scuffing
  • BS EN 12697-24:2012 Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fatigue
  • BS EN 12697-24:2004 Bituminous mixtures - Test methods for hot mix asphalt - Resistance to fatigue
  • BS ISO 1920-14:2019 Testing of concrete - Setting time of concrete mixtures by resistance to penetration
  • BS EN 12697-24:2018 Tracked Changes. Bituminous mixtures. Test methods. Resistance to fatigue
  • BS EN 13286-41:2003 Unbound and hydraulically bound mixtures - Test method for determination of the compressive strength of hydraulically bound mixtures
  • BS ISO 11236:2017 Rubber compounding ingredients. p-Phenylenediamine antidegradants (PPDs). Test methods
  • BS EN 13286-40:2003 Unbound and hydraulically bound mixtures - Test method for determination of the direct tensile strength of hydraulically bound mixtures
  • BS 5896:1980 Specification for high tensile steel wire and strand for the prestressing of concrete
  • BS 5896:2012 High tensile steel wire and strand for the prestressing of concrete. Specification
  • BS EN 12390-10:2018 Tracked Changes. Testing hardened concrete. Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide
  • BS EN 13286-41:2021 Tracked Changes. Unbound and hydraulically bound mixtures. Test method for the determination of the compressive strength of hydraulically bound mixtures
  • DD 213-1993 Method for determination of the indirect tensile stiffness modulus of bituminous mixtures
  • BS EN 12697-45:2012 Bituminous mixtures. Test methods for hot mix asphalt. Saturation Ageing Tensile Stiffness (SATS) conditioning test
  • 20/30410965 DC BS EN 13286-41. Unbound and hydraulically bound mixtures. Part 41. Test method for the determination of the compressive strength of hydraulically bound mixtures
  • 20/30426168 DC BS EN 12697-41. Bituminous mixtures. Test methods. Part 41. Resistance to de-icing fluids
  • BS EN IEC 61558-1:2019 Safety of transformers, reactors, power supply units and combinations thereof - General requirements and tests
  • BS 4486:1980 Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete
  • BS DD CEN/TS 15087:2005 Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing — Test method for mechanical fasteners
  • BS DD CEN/TS 15087:2006 Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing. Test method for mechanical fasteners
  • BS EN 2848:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 80 IRHD

Korean Agency for Technology and Standards (KATS), Primary antibody secondary antibody mix

  • KS F 2351-2005 Testing method for the compressive strength of asphalt mixtures
  • KS F 2351-2020 Standard test method for the compressive strength of asphalt mixtures
  • KS F 2398-2017 Testing method for resistance of compacted asphalt mixtures to moisture induced damage
  • KS F 2398-2017(2022) Testing method for resistance of compacted asphalt mixtures to moisture induced damage
  • KS F 2436-2017 Testing method for time of setting of concrete mixture by penetration resistance
  • KS M ISO 11236-2007(2017) Rubber compounding ingredients－p-Phenylenediamine(PPD) antidegradants－Test methods
  • KS M ISO 11236-2007(2022) Rubber compounding ingredients－p-Phenylenediamine(PPD) antidegradants－Test methods
  • KS F 2335-2013 Standard test methods for resistance to deformation and cohesion of asphalt mixtures by means of hveem apparatus
  • KS F 2335-1995 Testing methods for resistance to deformation and cohesion of bituminous mixtures by means of Hveem apparatus
  • KS C IEC 61558-1:2022 Safety of transformers, reactors, power supply units and combinations thereof — Part 1: General requirements and tests
  • KS C IEC 61558-1:2002 Safety of power transformers, power supply units and similar－Part 1：General requirements and tests
  • KS C IEC 61558-1:2017 Safety of power transformers, power supply units and similar－Part 1：General requirements and tests

BE-NBN, Primary antibody secondary antibody mix

(U.S.) Ford Automotive Standards, Primary antibody secondary antibody mix

  • FORD ESH-M2G320-A-2015 ADHESIVE, EPOXY - ONE PART - ETHYLENE GLYCOL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESH-M2G251-A-2014 ADHESIVE, EPOXY - ONE PART - ETHYLENE GLYCOL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D762-A2-2010 POLYCARBONATE + POLYBUTHYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED MOLDING COMPOUND, HIGH IMPACT PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D813-A-2006 POLYCARBONATE + ABS BLEND, (PC+ABS) HIGH IMPACT, PLATING GRADE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESL-M4D359-A3-2010 THERMOPLASTIC POLYESTER, NON-REINFORCED PBT - HIGH IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D718-A4-2010 POLYCARBONATE + POLYBUTYLENE THEREPHTALATE (PC+PBT) BLEND FILM, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M4D255-A-2005 ABS MOLDING COMPOUND - HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D709-A-2009 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT HIGH IMPACT AND HIGH TENSILE STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A*
  • FORD WSB-M4D582-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT), HIGH IMPACT, 40% MINERAL/GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D685-A-2008 ABS + POLYCARBONATE BLEND (ABS+PC) MEDIUM IMPACT STRENGTH MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D697-A2-2008 ABS/POLYCARBONATE BLEND (ABS+PC), HIGH IMPACT STRENGTH, HIGH HEAT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M4D697-A1)
  • FORD WSK-M4D769-A-2008 ABS + POLYCARBONATE BLEND (ABS+PC) MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D816-A2-2008 POLYCARBONATE + ABS BLEND, (PC+ABS) MEDIUM IMPACT, HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D670-A-2012 POLYPROPYLENE (PP) COPOLYMER, MEDIUM HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D670-A-2013 POLYPROPYLENE (PP) COPOLYMER, MEDIUM HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1028-A2-2013 POLYPROPYLENE (PP) COPOLYMER, MEDIUM IMPACT COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M4D602-A-1988 POLYPHENYLENE ETHER (PPE) , HIGH IMPACT POLYSTYRENE BLEND, 30% GLASS FIBER REINFORCED,, INJECTION MOLDING COMPOUND, ELECTRICAL GRADE
  • FORD WSK-M4D684-A2-2008 ABS/PC BLEND, MEDIUM IMPACT STRENGTH MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D697-A1-2008 ABS/POLYCARBONATE BLEND (ABS+PC), HIGH IMPACT STRENGTH, HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D867-A-2008 ABS + POLYCARBONATE (ABS+PC), 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

Shandong Provincial Standard of the People's Republic of China, Primary antibody secondary antibody mix

  • DB37/T 3564-2019 Technical specification for design and construction of anti-rutting and anti-fatigue high modulus asphalt mixture
  • DB37/T 2361-2013 Technical specification for testing concrete compressive strength by ultrasonic rebound comprehensive method
  • DB37/T 2361-2022 Technical Regulations for Testing the Compressive Strength of Concrete by Ultrasonic Rebound Comprehensive Method

Professional Standard - Urban Construction, Primary antibody secondary antibody mix

  • CJJ/T 238-2016 Technical specification for application of anti-rutting asphalt mixture

国家市场监督管理总局、中国国家标准化管理委员会, Primary antibody secondary antibody mix

  • GB/T 36143-2018 Durable high modulus asphalt mixture for road engineering
  • GB/T 38948-2020 Evaluation method for the cracking resistance of asphalt mixture at low temperature

Indonesia Standards, Primary antibody secondary antibody mix

  • SNI 8139-2015 Spesifikasi bahan anti pengelupasan (anti stripping) pada campuran beraspal panas
  • SNI 6887-2012 Metode uji kuat tekan silinder campuran tanah-semen
  • SNI ASTM C403/C403M:2012 Test method for time of setting of concrete mixtures by penetration resistance.
  • SNI 03-1768-1990 Aggregates for concrete, Test methods for reactive properties against alkalin by chemical method
  • SNI 03-0450-1989 Test method for reactive alkaline properties of cement with concrete aggregates using stirring rod.

Jiangxi Provincial Standard of the People's Republic of China, Primary antibody secondary antibody mix

  • DB36/T 882-2015 Technical specification for detection of resistance to rice stem borer-feed mixed poison method

International Organization for Standardization (ISO), Primary antibody secondary antibody mix

  • ISO 11236:2017 Rubber compounding ingredients — p-Phenylenediamine antidegradants (PPDs) — Test methods
  • ISO 1920-14:2019 Testing of concrete — Part 14: Setting time of concrete mixtures by resistance to penetration
  • ISO 11236:2000/cor 1:2006 Rubber compounding ingredients - p-Phenylenediamine (PPD) antidegradants - Test methods; Technical Corrigendum 1

German Institute for Standardization, Primary antibody secondary antibody mix

  • DIN EN 12697-24:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue; German version EN 12697-24:2004+A1:2007
  • DIN EN 12697-41:2023 Bituminous mixtures - Test methods - Part 41: Resistance to de-icing fluids
  • DIN EN 12697-24:2018 Bituminous mixtures - Test methods - Part 24: Resistance to fatigue
  • DIN EN 12697-24:2018-11 Bituminous mixtures - Test methods - Part 24: Resistance to fatigue; German version EN 12697-24:2018
  • DIN EN 12697-41:2023-03 Bituminous mixtures - Test methods - Part 41: Resistance to de-icing fluids; German version EN 12697-41:2023
  • DIN EN 13286-41:2022 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • DIN EN 13286-41:2020 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures; German and English version prEN 13286-41:2020
  • DIN EN 12390-10:2019-08 Testing hardened concrete - Part 10: Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide; German version EN 12390-10:2018
  • DIN EN 13286-41:2022-02 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures; German version EN 13286-41:2021
  • DIN EN 12390-10:2019 Testing hardened concrete - Part 10: Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide
  • DIN EN 12697-24:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue; German version EN 12697-24:2012
  • DIN CEN/TS 13286-54:2014-12*DIN SPEC 18094:2014-12 Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures; German version CEN/TS 13286-54:2014
  • DIN EN 12697-46:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests; German version EN 12697-46:2012
  • DIN EN 12697-44:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test; German version EN 12697-44:2010
  • DIN EN ISO 24598:2008 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2007); English version of DIN EN ISO 24598:2008-03
  • DIN EN 1543:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers; German version EN 1543:1998

European Committee for Standardization (CEN), Primary antibody secondary antibody mix

  • EN 12697-24:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue
  • EN 12697-24:2018 Bituminous mixtures - Test methods - Part 24: Resistance to fatigue
  • PD CEN/TS 12697-50:2016 Bituminous mixtures - Test methods - Part 50: Resistance to scuffing
  • prEN 12697-41-2020 Bituminous mixtures - Test methods - Part 41: Resistance to de-icing fluids
  • EN 13286-43-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • EN 13286-4-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • EN 13286-3-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • EN 13286-41-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • EN 12697-41:2023 Bituminous mixtures - Test methods - Part 41: Resistance to de-icing fluids
  • EN 12697-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test
  • EN 12697-46:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests
  • CEN/TS 13286-54:2014 Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures
  • EN 12697-44:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test
  • EN 12390-5:2000 Testing Hardened Concrete - Part 5: Flexural Strength of Test Specimens Incorporating Corrigendum September 2004
  • EN 12697-23:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens
  • EN 12697-23:2017 Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens
  • EN 12390-6:2000 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens Incorporating corrigendum September 2004
  • prEN 14488-3-2021 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

CEN - European Committee for Standardization, Primary antibody secondary antibody mix

  • EN 12697-24:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue

Association Francaise de Normalisation, Primary antibody secondary antibody mix

  • NF EN 12697-24:2018 Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 24 : résistance à la fatigue
  • XP P98-818-50*XP CEN/TS 12697-50:2020 Bituminous mixtures - Test methods - Part 50 : resistance to scuffing
  • NF P98-818-24*NF EN 12697-24:2018 Bituminous mixtures - Test methods - Part 24 : resistance to fatigue
  • NF G18-002:1982 Natural or synthetic polyisoprene rubber threads. Tensile test.
  • NF P98-818-24:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 24 : Resistance to fatigue.
  • NF P98-818-24:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 24 : resistance to fatigue.
  • NF T45-028*NF ISO 11236:2017 Rubber compounding ingredients - p-Phenylenediamine antidegradants (PPDs) - Test methods
  • XP CEN/TS 12697-50:2020 Mélanges bitumineux - Méthodes d'essai - Partie 50 : résistance aux arrachements superficiels
  • NF EN 12697-41:2023 Mélanges bitumineux - Méthodes d'essais - Partie 41 : résistance aux fluides de déverglaçage
  • NF T45-028:2006 Rubber compounding ingredients - P-Phenylenediamine (PPD) antidegradants - Test methods.
  • NF ISO 11236:2017 Ingrédients de mélange du caoutchouc - Antidégradants du type p-phénylènediamine (PPDs) - Méthodes d'essai
  • NF EN 12390-10:2018 Essai pour béton durci - Partie 10 : détermination de la résistance à la carbonatation du béton à des niveaux atmosphériques de dioxyde de carbone
  • NF P18-430-10*NF EN 12390-10:2018 Testing hardened concrete - Part 10 : determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide
  • NF M87-229-3*NF EN ISO 15156-3:2011 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3 : cracking-resistant CRAs (corrosion-resistant alloys) and other alloys.
  • NF ISO 695:1986 Verre - Résistance à l'attaque par une solution aqueuse bouillante d'un mélange alcalin. Méthode d'essai et classification.
  • NF P98-818-23:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 23 : determination of the indirect tensile strength of bituminous specimens.
  • NF P98-818-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45 : Saturation Ageing Tensile Stiffness (SATS) conditioning test.
  • NF X41-600:1971 Tests for the resistance to micro-organisms of natural or artificial cellulose textiles. Method by mixed inoculation (spores/mycellium).
  • NF P98-818-46:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: low temperature cracking and properties by uniaxial tension tests
  • NF U47-306:2004 Animal health analysis methods - Reagent control protocol for the detection of total antibodies (or gB-antibodies) against the Aujeszky desease by the ELISA method in serums (individual or mixed).
  • NF EN IEC 61558-1:2019 Sécurité des transformateurs, bobines d'inductance, blocs d'alimentation et des combinaisons de ces éléments - Partie 1 : exigences générales et essais
  • P18-893:1992 Special products for hydraulic concrete constructions. Synthetic resin based products for injection into concrete structures. Test of brittleness against impact.
  • NF M87-229-2*NF EN ISO 15156-2:2011 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2 : cracking-resistant carbon and low-alloy steels, and the use of cast irons.
  • NF C52-558-1*NF EN IEC 61558-1:2019 Safety of transformers, reactors, power supply units and combinations thereof - Part 1 : general requirements and tests

AASHTO - American Association of State Highway and Transportation Officials, Primary antibody secondary antibody mix

  • T259-1980 Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration (Twentieth Edition)
  • T167-1994 Standard Method of Test for Compressive Strength of Bituminous Mixtures
  • T161-2000 Standard Method of Test for Resistance of Concrete to Rapid Freezing and Thawing (Twentieth Edition; ASTM C666-97)
  • T 167-2010 Standard Method of Test for Compressive Strength of Hot Mix Asphalt
  • T 197M/T 197-2005 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance
  • T 197M/T 197-2011 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance
  • T 197M/T 197-2008 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance
  • T 283-2014 Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage
  • T 283-2003 Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage
  • T167-1995 Standard Specification for Compressive Strength of Bituminous Mixtures (Nineteenth Edition; ASTM D1074-93)
  • T197-1993 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance (ASTM C403-90)
  • T22-1997 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens (Twentieth Edition; ASTM C39-86)
  • T198-1997 Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens (Twentieth Edition; ASTM C496-90)
  • T197-2000 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance (Twentieth Edition; ASTM C403-97)
  • T283-1989 Standard Method of Test for Resistance of Compacted Bituminous Mixture to Moisture Induced Damage (Eighteenth Edition)
  • T 283-2002 Standard Method of Test for Resistance of Compacted Mixtures to Moisture-Induced Damage (HM-22; Part IIA)
  • T 246-2007 Standard Method of Test for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • T 246-2010 Standard Method of Test for Resistance to Deformation and Cohesion of Hot Mix Asphalt (HMA) by Means of Hveem Apparatus
  • T 167-2002 Standard Method of Test for Compressive Strength of Bituminous Mixtures (HM-22; Part IIA; ASTM Designation: D 1074-96)
  • T 246-1993 Standard Method of Test for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus (ASTM Designation D1560-81)

American Society for Testing and Materials (ASTM), Primary antibody secondary antibody mix

  • ASTM D1074-96 Standard Test Method for Compressive Strength of Bituminous Mixtures
  • ASTM D1074-17 Standard Test Method for Compressive Strength of Asphalt Mixtures
  • ASTM D1074-02 Standard Test Method for Compressive Strength of Bituminous Mixtures
  • ASTM D1074-09 Standard Test Method for Compressive Strength of Bituminous Mixtures
  • ASTM D3039/D3039M-08 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
  • ASTM C403/C403M-08 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
  • ASTM C403/C403M-23 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
  • ASTM D5102-96 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
  • ASTM D7064/D7064M-08(2013) Standard Practice for Open-Graded Friction Course 40;OGFC41; Mix Design
  • ASTM D5102/D5102M-22 Standard Test Methods for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
  • ASTM D6932/D6932M-08(2013) Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
  • ASTM C1117-89(1994) Standard Test Method for Time of Setting of Shotcrete Mixtures by Penetration Resistance (Withdrawn 2003)
  • ASTM D5102-04 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
  • ASTM D5102-09 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
  • ASTM D5581-06 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
  • ASTM E2169-12 Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids
  • ASTM D7705/D7705M-12 Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
  • ASTM E2169-01 Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids
  • ASTM E2169-01(2007) Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids
  • ASTM D1560-05e1 Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D1560-92(2005) Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D1560-05 Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D1560-92(2000) Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D1560-09 Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D1560-09a Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM C1231/C1231M-12 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
  • ASTM C1231/C1231M-13 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
  • ASTM D1560-15 Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus
  • ASTM E2783-11 Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure
  • ASTM D8225-19 Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
  • ASTM C579-23 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • ASTM C1231/C1231M-07 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
  • ASTM C1231/C1231M-00e1 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
  • ASTM C1231/C1231M-06 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
  • ASTM C1231/C1231M-15 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
  • ASTM C1231/C1231M-08a Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
  • ASTM C1231/C1231M-09 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
  • ASTM D5581-07A(2021)e1 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 in. Diameter Specimen)
  • ASTM D8044-23 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
  • ASTM D8044-16 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures

Anhui Provincial Standard of the People's Republic of China, Primary antibody secondary antibody mix

  • DB34/T 3092-2018 Technical specification for the application of drainage and anti-cracking asphalt mixture
  • DB34/T 2463-2015 Ultrasonic rebound comprehensive method for testing technical specifications for concrete compressive strength in highway engineering

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Primary antibody secondary antibody mix

  • GB/T 10212-1988 The determination of granula average crushing strength for monoammonium phosphate and diammonium phosphate

Lithuanian Standards Office , Primary antibody secondary antibody mix

  • LST EN 12697-24-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue
  • LST EN 12697-41-2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
  • LST EN 13286-41-2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • LST CEN/TS 13286-54-2014 Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures
  • LST EN 12960-2002 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
  • LST EN 12960-2002/AC-2007 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
  • LST EN 14488-3-2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

Danish Standards Foundation, Primary antibody secondary antibody mix

  • DS/EN 12697-24:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue
  • DS/EN 12697-41:2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
  • DS/EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • DS/EN 12960/AC:2007 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
  • DS/EN 12960:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
  • DS/EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

AENOR, Primary antibody secondary antibody mix

  • UNE-EN 12697-24:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue
  • UNE-EN 12697-41:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
  • UNE-EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • UNE 43705:1991 GLASS. RESISTANCE TO ATTACK BY A BOILING AQUEOUS SOLUTION OF MIXED ALKALI. METHOD OF TEST AND CLASSIFICATION.
  • UNE-EN 12960:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance.
  • UNE-EN 14488-3:2007 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

ES-UNE, Primary antibody secondary antibody mix

  • UNE-EN 12697-24:2019 Bituminous mixtures - Test methods - Part 24: Resistance to fatigue
  • UNE-EN 12390-10:2019 Testing hardened concrete - Part 10: Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide
  • UNE-EN 13286-41:2022 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • UNE 41210:2022 Test methods for bituminous mixtures. Resistance to structural cracking and fatigue with UGR-FACT
  • UNE-EN IEC 61558-1:2021 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests

PT-IPQ, Primary antibody secondary antibody mix

  • NP ENV 1994-1-2-2000 Eurocode 4:Design of composite steel and concrete structures Part 1-2:General rules Structural fire design
  • NP ENV 1992-1-2-2000 Eurocode 2:Design of concrete structures Part 1-2:General rules Structural fire design

Hunan Provincial Standard of the People's Republic of China, Primary antibody secondary antibody mix

  • DB43/T 2029-2021 Technical regulations for "one two three" reduction and control of drug-resistant weeds in paddy fields

Professional Standard - Traffic, Primary antibody secondary antibody mix

RO-ASRO, Primary antibody secondary antibody mix

  • STAS 11404-1980 Woven fabrics for antiacid protective equipment POLYPROPYLENE AND WOOLBLENDED CLOTH

The American Road & Transportation Builders Association, Primary antibody secondary antibody mix

  • AASHTO T 167-2010 Standard Method of Test for Compressive Strength of Hot Mix Asphalt
  • AASHTO T 197M/T 197-2011 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance
  • AASHTO T 283-2014 Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage
  • AASHTO T 283-2021 Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage
  • AASHTO T 283-2002 Standard Method of Test for Resistance of Compacted Mixtures to Moisture-Induced Damage HM-22; Part IIA
  • AASHTO T 246-2010 Standard Method of Test for Resistance to Deformation and Cohesion of Hot Mix Asphalt (HMA) by Means of Hveem Apparatus
  • AASHTO T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
  • AASHTO TP 116-2015 Standard Method of Test for Rutting Resistance of Asphalt Mixtures Using Incremental Repeated Load Permanent Deformation (iRLPD)
  • AASHTO T 167-2002 Standard Method of Test for Compressive Strength of Bituminous Mixtures HM-22; Part IIA; ASTM Designation: D 1074-96

PL-PKN, Primary antibody secondary antibody mix

  • PN C04404-24-1986 Pigments for paints General methods of test Determination of resistance to sulphur dioxide
  • PN B13110-1986 Glass Resistance to attack by a boiling aqueous solution of mixed alkali Method of test and classification

AT-ON, Primary antibody secondary antibody mix

  • OENORM EN 13286-41-2021 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures

Shanxi Provincial Standard of the People's Republic of China, Primary antibody secondary antibody mix

  • DB14/T 677-2012 Technical specification for design and construction of road rutting-resistant asphalt mixture
  • DB14/T 2282-2021 Technical specification for design and construction of high modulus anti-fatigue asphalt mixture
  • DB14/T 1715-2018 Technical requirements and testing methods of anti-rutting agent for highway asphalt mixture

Inner Mongolia Provincial Standard of the People's Republic of China, Primary antibody secondary antibody mix

  • DB15/T 1932-2020 Technical specifications for design and construction of anti-icing asphalt mixture for highways

ACI - American Concrete Institute, Primary antibody secondary antibody mix

  • ACI SP-258-2008 Seismic Strengthening of Concrete Buildings Using FRP Composites
  • ACI SP-313-2017 Proceedings of the First ACI & JCI Joint Seminar: Design of Concrete Structures Against Earthquake and Tsunami Disasters

Taiwan Provincial Standard of the People's Republic of China, Primary antibody secondary antibody mix

  • CNS 11879-1987 Rubber Antioxidant TMDQ (Poly-2,2,4-trimethyl-1,2-Dihydroquinoline)
  • CNS 11880-1987 Method of Test for Rubber Antioxidant TMDO (Poly-2,2,4-Trimethyl-1,2-Dihydroquinoline)

VE-FONDONORMA, Primary antibody secondary antibody mix

US-FCR, Primary antibody secondary antibody mix

  • FCR COE CRD-C 406-79-1979 HANDBOOK FOR CONCRETE AND CEMENT TEST METHOD FOR COMPRESSIVE STRENGTH OF MORTAR FOR USE IN EVALUATING WATER FOR MIXING CONCRETE

Compressed Gas Association (U.S.), Primary antibody secondary antibody mix

  • CGA P-57-2013 AVOIDANCE OF FAILURE OF CARBON MONOXIDE AND OF CARBON MONOXIDE/CARBON DIOXIDE MIXTURES CYLINDERS
  • CGA P-57-2007 AVOIDANCE OF FAILURE OF CARBON MONOXIDE AND OF CARBON MONOXIDE/CARBON DIOXIDE MIXTURES CYLINDERS FIRST EDITION

HU-MSZT, Primary antibody secondary antibody mix

工业和信息化部, Primary antibody secondary antibody mix

  • HG/T 5197-2017 Test Method for Hydration Resistance of Carbon Monoxide Sulfur Tolerant Shift Catalysts

Standard Association of Australia （SAA）, Primary antibody secondary antibody mix

  • AS/NZS 2350.11:2006 Methods of testing portland, blended and masonry cements - Compressive strength
  • AS/NZS 2350.11:2001 Methods of testing portland, blended and masonry cements - Compressive strength

Society of Automotive Engineers (SAE), Primary antibody secondary antibody mix

  • SAE AMS3375B-2001 Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing
  • SAE J2990-2-2020 Hybrid and EV First and Second Responder Recommended Practice
  • SAE J2990-2012 Hybrid and EV First and Second Responder Recommended Practice
  • SAE J2990-1-2016 Hybrid and EV First and Second Responder Recommended Practice
  • SAE J2990-2019 Hybrid and EV First and Second Responder Recommended Practice

GOSTR, Primary antibody secondary antibody mix

  • GOST R 58406.3-2020 Automobile roads of general use. Asphalt mixtures and asphalt. Method for determining the resistance to rutting by rolling a loaded wheel

Beijing Provincial Standard of the People's Republic of China, Primary antibody secondary antibody mix

  • DB11/T 1446-2017 Technical regulations for testing the compressive strength of pumped concrete by rebound method and ultrasonic rebound comprehensive method

Defense Logistics Agency, Primary antibody secondary antibody mix

Military Standards (MIL-STD), Primary antibody secondary antibody mix

Professional Standard - Civil Aviation, Primary antibody secondary antibody mix

  • MH/T 6083-2012 Standard test method for spalling resistance of concrete surfaces exposed to deicing compounds

Aerospace Industries Association/ANSI Aerospace Standards, Primary antibody secondary antibody mix

  • AIA/NAS NASM6812-2006 Fasteners, Externally Threaded Alloy Steel, Corrosion Resistant Steel, Aluminum 60,000 PSI to 125,000 PSI Rev 2

ES-AENOR, Primary antibody secondary antibody mix

United States Navy, Primary antibody secondary antibody mix

International Electrotechnical Commission (IEC), Primary antibody secondary antibody mix

  • IEC PAS 62707-1:2011 LED - Binning - Part 1: General requirements and white grid
  • IEC 61558-1:2017 RLV Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
  • IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests

KR-KS, Primary antibody secondary antibody mix

  • KS C IEC 61558-1-2022 Safety of transformers, reactors, power supply units and combinations thereof — Part 1: General requirements and tests

NL-NEN, Primary antibody secondary antibody mix

  • NEN 2038-1979 Air quality - Calibration gas mixture of nitrogen monoxide in nitrogen - Gravimetric preparation

Japanese Industrial Standards Committee (JISC), Primary antibody secondary antibody mix

  • JIS C 61558-1:2019 Safety of transformers, reactors, power supply units and combinations thereof -- Part 1: General requirements and tests

European Committee for Electrotechnical Standardization（CENELEC）, Primary antibody secondary antibody mix

  • EN IEC 61558-1:2019 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests

  Primary Antibody Secondary Antibody Hybridization, Primary Antibody Secondary Antibody Dilution, Primary antibody, secondary antibody blocking, Primary and Secondary Antibody Dilutions, Milk for primary antibody and secondary antibody, Primary antibody and secondary antibody combined first, Dilution of primary and secondary antibodies, Primary antibody secondary antibody mix, Secondary antibody dilution according to primary antibody, primary antibody secondary antibody binding, The secondary antibody recognizes several primary antibodies, Primary Antibody Secondary Antibody Formula, Primary Antibody Secondary Antibody Dilution, Secondary Antibody Mix, Concentration of primary antibody and secondary antibody, Primary Antibody Secondary Antibody Dilution, Primary Antibody Secondary Antibody Effect, Dilute primary and secondary antibodies, Apply primary antibody and secondary antibody, Primary antibody plus secondary antibody.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved