ZH
RU
ES

primary antibody secondary antibody binding

primary antibody secondary antibody binding, Total:500 items.

In the international standard classification, primary antibody secondary antibody binding involves: Footwear, Wood-based panels, Materials for aerospace construction, Surface treatment and coating, Veterinary medicine, Protection against crime, Construction materials, Structures of buildings, Fertilizers, Products of the textile industry, Rubber and plastics products, Road engineering, Adhesives, Raw materials for rubber and plastics, Testing of metals, Waxes, bituminous materials and other petroleum products, Protection of and in buildings, Iron and steel products, Equipment for the rubber and plastics industries, Test conditions and procedures in general, Analytical chemistry, Packaging and distribution of goods in general, Plastics, Protection against fire, Construction industry, Products of the chemical industry, Paper and board, Equipment for petroleum and natural gas industries, Fasteners, Organic chemicals, Farming and forestry, Reinforced plastics, Transformers. Reactors, Elements of buildings, Petroleum, petroleum products and natural gas handling equipment.


Professional Standard - Agriculture, primary antibody secondary antibody binding

ZA-SANS, primary antibody secondary antibody binding

  • SANS 5665:2005 Resistance to creep of adhesive bonds
  • SANS 6045:2007 Resistance to delamination of wood adhesive bonds
  • SANS 1465-2:1988 Steel castings for general engineering applications Part 2: Wear-resistant carbon and low alloy steel castings

AWS - American Welding Society, primary antibody secondary antibody binding

  • D1.8/D1.8M-2009 Structural Welding Code—Seismic Supplement (Second Edition)

PL-PKN, primary antibody secondary antibody binding

  • PN H92149-1986 Low alloy struclural weather-resisting thin steels
  • PN C04404-24-1986 Pigments for paints General methods of test Determination of resistance to sulphur dioxide
  • PN C89412-1989 Dispersions of homopolymers Mand copolymers Determination of shear strength of adhesive-bonded joint

CZ-CSN, primary antibody secondary antibody binding

Association Francaise de Normalisation, primary antibody secondary antibody binding

  • NF B51-341:1995 Plywood. Description of bending properties for structural plywood.
  • NF G18-002:1982 Natural or synthetic polyisoprene rubber threads. Tensile test.
  • NF T45-028*NF ISO 11236:2017 Rubber compounding ingredients - p-Phenylenediamine antidegradants (PPDs) - Test methods
  • NF T45-028:2006 Rubber compounding ingredients - P-Phenylenediamine (PPD) antidegradants - Test methods.
  • NF ISO 11236:2017 Ingrédients de mélange du caoutchouc - Antidégradants du type p-phénylènediamine (PPDs) - Méthodes d'essai
  • NF T76-051*NF EN 14256:2007 Adhesives for non-structural wood applications - Test method and requirements for resistance to static load
  • NF U47-016:2021 Animal health analysis methods - Detection of antibodies against equine influenza by the complement fixation test
  • NF M87-229-3*NF EN ISO 15156-3:2011 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3 : cracking-resistant CRAs (corrosion-resistant alloys) and other alloys.
  • NF B10-602-5*NF EN 14617-5:2012 Agglomerated stone - Test methods - Part 5 : determination of freeze and thaw resistance
  • NF U47-004:2000 Animal health analysis methods - Detection of antibodies against Brucellosis by the Complement Fixation Test.
  • NF U47-008:2000 Animal health analysis methods - Detection of antibodies against Ovine epididymitis by the Complement Fixation Test.
  • NF U47-008:2012 Animal health analysis methods - Detection of antibodies against Ovine epididymitis by the Complement Fixation Test
  • NF T76-152-1:1992 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES. TEST METHODS. PART 1 : DETERMINATION OF BOND STRENGTH IN LONGITUDINAL TENSILE SHEAR. (EUROPEAN STANDARD EN 302-1).
  • NF T76-152-2*NF EN 302-2:2017 Adhesives for load-bearing timber structures - Test methods - Part 2 : determination of resistance to delamination
  • NF EN 302-2:2023 Adhésifs pour structures portantes en bois - Méthodes d'essai - Partie 2 : détermination de la résistance à la délamination
  • NF U47-007:2000 Animal health analysis methods - Detection of antibodies against Avian Chlamydiosis by the Complement Fixation Test.
  • NF U47-004:2009 Animal health analysis method - Detection of antibodies against Brucellosis by the Complement Fixation Test
  • NF U47-004:2023 Méthodes d'analyse en santé animale - Recherche d'anticorps contre la brucellose par la microméthode de fixation du complément
  • NF U47-001:2000 Animal health analysis methods - Detection of antibodies against Contagious Agalactia by the Complement Fixation Test.
  • NF U47-007:2009 Animal health analysis methods - Detection of antibodies against Avian Chlamydiosis by the Complement Fixation Test.
  • NF T76-152-2:1992 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES. TEST METHODS. PART 2 : DETERMINATION OF RESISTANCE TO DELAMINATION (LABORATORY METHOD). (EUROPEAN STANDARD EN 302-2).
  • NF EN 17618:2021 Adhésifs - Joints collés de bois à bois à usages non structuraux - Détermination de la résistance au cisaillement par effort de compression
  • NF P06-030-1*NF EN 1998-1:2005 Eurocode 8 - Design of structures for earthquake resistance - Part 1 : general rules, seismic actions and rules for buildings
  • NF P06-030-1/A1*NF EN 1998-1/A1:2013 Eurocode 8 - Design of structures for earthquake resistance - Part 1 : general rules, seismic actions and rules for buildings
  • NF EN 1998-1:2005 Eurocode 8 - Calcul des structures pour leur résistance aux séismes - Partie 1 : règles générales, actions sismiques et règles pour les bâtiments
  • NF EN 1998-1/A1:2013 Eurocode 8 - Calcul des structures pour leur résistance aux séismes - Partie 1 : règles générales, actions sismiques et règles pour les bâtiments
  • NF U47-006:2009 Animal health analysis methods - Detection of antibodies against Chlamydiosis and/or Q Fever in mammals by the Complement Fixation Test.
  • NF U47-006:2000 Animal health analysis methods - Detection of antibodies against Chlamydiosis and/or Q Fever in mammals by the Complement Fixation Test.
  • NF U47-008:2023 Méthodes d'analyse en santé animale - Recherche d'anticorps contre l'épididymite contagieuse du bélier par la technique de fixation du complément
  • NF EN IEC 61558-1:2019 Sécurité des transformateurs, bobines d'inductance, blocs d'alimentation et des combinaisons de ces éléments - Partie 1 : exigences générales et essais
  • NF EN 12607-3:2014 Bitumes et liants bitumineux - Détermination de la résistance au durcissement sous l'effet de la chaleur et de l'air - Partie 3 : méthode RFT
  • NF EN 12607-1:2014 Bitumes et liants bitumineux - Détermination de la résistance au durcissement sous l'effet de la chaleur et de l'air - Partie 1 : méthode RTFOT
  • NF EN ISO 3325/A1:2003 Matériaux métalliques frittés à l'exclusion des métaux durs - Détermination de la résistance à la rupture transversale - Amendement 1 : données concernant la fidélité
  • NF M87-229-2*NF EN ISO 15156-2:2011 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2 : cracking-resistant carbon and low-alloy steels, and the use of cast irons.
  • NF T76-152-4:1992 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES. TEST METHODS. PART 4 : DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH. (EUROPEAN STANDARD EN 302-4).
  • P18-893:1992 Special products for hydraulic concrete constructions. Synthetic resin based products for injection into concrete structures. Test of brittleness against impact.
  • NF U47-304:2004 Animal health analysis methods - Control protocol of reagents Control protocol of reagents for the detection of antibodies directed against brucellosis by the Rose Bengal test, the complement fixation test or the seroagglutination test in serum samples or

United States Navy, primary antibody secondary antibody binding

International Organization for Standardization (ISO), primary antibody secondary antibody binding

  • ISO 14916:1999 Thermal spraying - Determination of tensile adhesive strength
  • ISO 11003-2:2001 Adhesives - Determination of shear behaviour of structural adhesives - Part 2: Tensile test method using thick adherends
  • ISO 11003-2:1993 Adhesives; determination of shear behaviour of structurel bonds; part 2: thick-adherend tensile-test method
  • ISO 14713-1:2009 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance
  • ISO 14713-1:2017 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance
  • ISO 11003-1:2001 Adhesives - Determination of shear behaviour of structural adhesives - Part 1: Torsion test method using butt-bonded hollow cylinders
  • ISO 11003-1:1993 Adhesives; determination of shear behaviour of structural bonds; part 1: torsion test method using butt-bonded hollow cylinders
  • ISO 19210:2017 Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints
  • ISO 11236:2000/cor 1:2006 Rubber compounding ingredients - p-Phenylenediamine (PPD) antidegradants - Test methods; Technical Corrigendum 1
  • ISO 5981:2007 Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing
  • ISO 1920-14:2019 Testing of concrete — Part 14: Setting time of concrete mixtures by resistance to penetration

NL-NEN, primary antibody secondary antibody binding

  • NEN-EN 582-1994 Thermal spraying.Determination of adhesive tensile strength

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, primary antibody secondary antibody binding

  • GB/T 8642-2002 Thermal spraying--Determination of tensile adhesive strength
  • GB/T 10212-1988 The determination of granula average crushing strength for monoammonium phosphate and diammonium phosphate

(U.S.) Ford Automotive Standards, primary antibody secondary antibody binding

  • FORD ESH-M2G320-A-2015 ADHESIVE, EPOXY - ONE PART - ETHYLENE GLYCOL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESH-M2G251-A-2014 ADHESIVE, EPOXY - ONE PART - ETHYLENE GLYCOL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D762-A2-2010 POLYCARBONATE + POLYBUTHYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED MOLDING COMPOUND, HIGH IMPACT PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESL-M4D359-A3-2010 THERMOPLASTIC POLYESTER, NON-REINFORCED PBT - HIGH IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M4D255-A-2005 ABS MOLDING COMPOUND - HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D709-A-2009 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT HIGH IMPACT AND HIGH TENSILE STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A*
  • FORD WSB-M4D582-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT), HIGH IMPACT, 40% MINERAL/GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D813-A-2006 POLYCARBONATE + ABS BLEND, (PC+ABS) HIGH IMPACT, PLATING GRADE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D670-A-2012 POLYPROPYLENE (PP) COPOLYMER, MEDIUM HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D670-A-2013 POLYPROPYLENE (PP) COPOLYMER, MEDIUM HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1028-A2-2013 POLYPROPYLENE (PP) COPOLYMER, MEDIUM IMPACT COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

Professional Standard - Commodity Inspection, primary antibody secondary antibody binding

  • SN/T 3949-2014 Plastic package.Determination of harmful material bisphenol A.Conjuction of antigen and antibody method

Society of Automotive Engineers (SAE), primary antibody secondary antibody binding

  • SAE AMS3892/12-1992 Tow, Carbon Fiber for Structural Composites 730 (5033) Tensile Strength, 41 (283) Tensile Modulus
  • SAE AMS3892/11A-1992 Tow, Carbon Fiber for Structural Composites 450 (3103) Tensile Strength, 32 (221) Tensile Modulus
  • SAE AMS3892/10A-1992 Tow, Carbon Fiber for Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile Modulus
  • SAE AMS3892/9B-1992 Tow, Carbon Fiber for Structural Composites 500 (3447) Tensile Strength, 32 (221) Tensile Modulus
  • SAE AMS3892/6A-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength, 57 (393) Tensile Modulus
  • SAE AMS3892/5B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 220 (1517) Tensile Strength, 75 (517) Tensile Modulus
  • SAE AMS3892/4B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 75 (517) Tensile ModuluS
  • SAE AMS3892/2B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 50 (345) Tensile Modulus
  • SAE AMS3892/1B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
  • SAE AMS3892/8A-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
  • SAE AMS3892/7A-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
  • SAE AMS3892/3B-1992 Tow or Yarn, Carbon Fibers for Structural Composites GF 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
  • SAE AMS4349C-1995 Core, Honeycomb, Aluminum Alloy, Corrosion Inhibited For Sandwich Construction 5056, 350 (177)
  • SAE AMS4348C-1995 Core, Honeycomb Aluminum Alloy, Corrosion Inhibited, For Sandwich Construction, 5052, 350 (177)
  • SAE AMS3375B-2001 Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing

American Society for Testing and Materials (ASTM), primary antibody secondary antibody binding

  • ASTM D3500-90(2009) Standard Test Methods for Structural Panels in Tension
  • ASTM D3500-14 Standard Test Methods for Structural Panels in Tension
  • ASTM F1247-89(2005) Standard Specification for Intrusion Resistant Generic Vault Structures
  • ASTM E1450-92(1998)e1 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
  • ASTM E1450-03 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
  • ASTM E1450-09 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
  • ASTM A490-08a Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
  • ASTM A490-06 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
  • ASTM A490-11 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
  • ASTM A490-12 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
  • ASTM A490-10 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
  • ASTM D7247-16 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
  • ASTM A490-14 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
  • ASTM D7705/D7705M-12 Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
  • ASTM D1560-05e1 Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D1560-92(2005) Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D1560-05 Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D1560-92(2000) Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D1560-09 Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D1560-09a Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
  • ASTM D7857-16 Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures
  • ASTM D906-98(2004) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
  • ASTM D906-98(2011) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
  • ASTM D906-98 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
  • ASTM E2127-01a(2006) Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
  • ASTM E2127-01a(2022) Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
  • ASTM E2127-01A(2015)e1 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction

RU-GOST R, primary antibody secondary antibody binding

  • GOST 17405-1981 Qlanders antigen for use in the complement fixation test. Specifications
  • GOST 22561-1977 Tips of composite shanks for press-moulds for pressure moulding of thermoset articles. Construction and dimensions
  • GOST 17405-2016 Medicine remedies for veterinary use. Glanders antigen for use in the complement fixation test. Specifications
  • GOST 22560-1977 Pushers of composite shanks for press-moulds for pressure moulding of thermoset articles. Construction and dimensions
  • GOST 33121-2014 Glued timber structures. Methods for determining the resistance of glue joints to the temperature and humidity effects
  • GOST R 56809-2015 Polymer composites. Method for determination of compressive strength parallel to the plane of sandwich constructions
  • GOST R 56791-2015 Polymer composites. Determination of mechanical characteristics of shear of the inner layer of sandwich constructions by beam flexure
  • GOST 32858-2014 Automobile roads of general use. Slag rubble. Determination of resistance of grain structure of slag rubble against decay
  • GOST R 9.604-2021 Unified system of corrosion and ageing protection. Electrochemical protection. Protection devices of underground metallic structures against corrosion by induced AC. General specifications

British Standards Institution (BSI), primary antibody secondary antibody binding

  • PD 6698:2009 Recommendations for the design of structures for earthquake resistance to BS EN 1998
  • BS EN ISO 14713-1:2010 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. General principles of design and corrosion resistance
  • BS EN ISO 14713-1:2009 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - General principles of design and corrosion resistance
  • BS EN 12003:2008 Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives
  • BS EN 12003:2008(2009) Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives
  • BS EN 14869-1:2004 Structural adhesives. Determination of shear behaviour of structural bonds. Torsion test method using butt-bonded hollow cylinders
  • BS ISO 11236:2017 Rubber compounding ingredients. p-Phenylenediamine antidegradants (PPDs). Test methods
  • BS EN 17334:2021 Glued-in rods in glued structural timber products. Testing, requirements and bond shear strength classification
  • BS EN 13587:2010 Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method
  • BS EN 302-2:2013 Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
  • BS EN 302-2:2017 Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
  • BS EN 13286-41:2021 Tracked Changes. Unbound and hydraulically bound mixtures. Test method for the determination of the compressive strength of hydraulically bound mixtures
  • BS 5350-C5:2002 Methods of test for adhesives - Determination of bond strength in longitudinal shear for rigid adherends
  • BS EN 14869-1:2011 Structural adhesives. Determination of shear behaviour of structural bonds. Torsion test method using butt-bonded hollow cylinders
  • 20/30410965 DC BS EN 13286-41. Unbound and hydraulically bound mixtures. Part 41. Test method for the determination of the compressive strength of hydraulically bound mixtures
  • BS ISO 1920-14:2019 Testing of concrete - Setting time of concrete mixtures by resistance to penetration
  • BS EN 1998-1:2004 Eurocode 8:Design of structures for earthquake resistance-Part 1:General rules,seismic actions and rules for buildings
  • BS EN 1998-1:2005 Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings
  • BS 5350-C1:1986 Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of cleavage strength of adhesive bonds
  • BS EN 302-2:2023 Tracked Changes. Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
  • BS EN IEC 61558-1:2019 Safety of transformers, reactors, power supply units and combinations thereof - General requirements and tests
  • 22/30439955 DC BS EN 1998-1-1. Eurocode 8. Design of structures for earthquake resistance. - Part 1-1. General rules and seismic action
  • BS 1902 Sec.3.10:1981 Methods of testing refractory materials. General and textural properties. Determination of resistance to carbon monoxide (method 1902-310)
  • NA to BS EN 1998-1:2004 UK National Annex to Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings
  • 21/30439577 DC BS EN 302-2. Adhesives for load-bearing timber structures. Test methods. Part 2. Determination of resistance to delamination
  • BS EN ISO 11343:2019 Tracked Changes. Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions. Wedge impact method
  • BS EN 2848:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 80 IRHD

Lithuanian Standards Office , primary antibody secondary antibody binding

  • LST 1428.19-1998 Conteate. Test method. Determination of frost resistance on one side freezing
  • LST EN 1128-2000 Cement-bonded particleboards - Determination of hard body impact resistance
  • LST EN 13286-41-2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • LST CEN/TS 13286-54-2014 Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures
  • LST EN 14256-2007 Adhesives for non-structural wood applications - Test method and requirements for resistance to static load
  • LST EN 302-2-2004 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
  • LST EN 12960-2002 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
  • LST EN 12960-2002/AC-2007 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
  • LST EN 1998-1-2005 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
  • LST EN 1998-1-2005/AC-2009 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings.

Korean Agency for Technology and Standards (KATS), primary antibody secondary antibody binding

  • KS F 2153-2005 Testing method for lateral load resistance of mechanical timber joints
  • KS F 2760-2018 Standard test method for the slant shear strength of structural bonding agents of concrete structures
  • KS F 2760-2023 Standard test method for the slant shear strength of structural bonding agents of concrete structures
  • KS M ISO 11236-2007(2017) Rubber compounding ingredients－p-Phenylenediamine(PPD) antidegradants－Test methods
  • KS M ISO 11236-2007(2022) Rubber compounding ingredients－p-Phenylenediamine(PPD) antidegradants－Test methods
  • KS M ISO 11003-1:2010 Adhesives－Determination of shear behaviour of structural adhesives－Part 1：Torsion test method using butt-bonded hollow cylinders
  • KS F 2436-2017 Testing method for time of setting of concrete mixture by penetration resistance
  • KS M ISO 3136:2009 Rubber latex－Styrene-butadiene－Determination of bound styrene content
  • KS C IEC 61558-1:2022 Safety of transformers, reactors, power supply units and combinations thereof — Part 1: General requirements and tests
  • KS C IEC 61558-1:2002 Safety of power transformers, power supply units and similar－Part 1：General requirements and tests
  • KS C IEC 61558-1:2017 Safety of power transformers, power supply units and similar－Part 1：General requirements and tests

Standard Association of Australia （SAA）, primary antibody secondary antibody binding

  • AS/NZS 2098.2:1996 Methods of test for veneer and plywood Method 2: Bond quality of plywood (chisel test)
  • AS/NZS 4266.6(Int):2001 Reconstituted wood-based panels - Methods of test - Tensile strength perpendicular to the plane of the panel (Internal bond strength)

European Committee for Standardization (CEN), primary antibody secondary antibody binding

  • EN ISO 14916:2017 Thermal spraying - Determination of tensile adhesive strength
  • EN 13286-43-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • EN 13286-4-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • EN 13286-3-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • EN 13286-41-2003E Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • EN ISO 14713-1:2017 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance
  • EN 1464:2010 Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method
  • CEN/TS 13286-54:2014 Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures
  • EN 14256:2007 Adhesives for non-structural wood applications - Test method and requirements for resistance to static load
  • EN 28339:1990 Building construction; jointing products; sealants; determination of tensile properties (ISO 8339:1984)
  • EN ISO 14713-1:2009 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2009)
  • prEN 1998-1-1 rev Eurocode 8 - Design of structures for earthquake resistance - Part 1-1: General rules and seismic action
  • EN ISO 5981:1997 Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Combined Shear Flexing and Rubbing ISO 5981: 1997
  • EN ISO 5981:2007 Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing
  • prEN 302-2-2021 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
  • EN 302-2:2023 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
  • EN 1998-1:2004/A1:2013 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
  • EN 1896:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
  • EN 28340:1990 Building construction; jointing products; sealants; determination of tensile properties at maintained extension (ISO 8340:1984)
  • EN 1998-1:2004 Eurocode 8 - Design of structures for earthquake resistance - Part 1: General rules, Seismic action and rules for buildings

YU-JUS, primary antibody secondary antibody binding

  • JUS C.N2.007-1990 Sintered metal materinis (excludlng hardmetal). Tenslle test pleces

IX-SA, primary antibody secondary antibody binding

Danish Standards Foundation, primary antibody secondary antibody binding

  • DS/EN 1128:1997 Cement-bonded particleboards - Determination of hard body impact resistance
  • DS/EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • DS/EN 14256:2007 Adhesives for non-structural wood applications - Test method and requirements for resistance to static load
  • DS/EN 302-2:2013 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
  • DS/ENV 1998-1-1:1994 Eurocode 8: Design provisions for earthquake resistance of structures - Part 1-1: General rules - Seismic actions and general requirements for structures
  • DS/ENV 1998-1-2:1994 Eurocode 8: Design provisions for earthquake resistance of structures - Part 1-2: General rules - General rules for buildings
  • DS/EN 302-1:1994 Adhesives for load-bearing timber structures. Test methods. Part 1: Determination of bond strength in longitudinal tensile shear
  • DS/EN 12960/AC:2007 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
  • DS/EN 12960:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
  • DS/EN 1998-1/AC:2009 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
  • DS/EN 1998-1:2005 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
  • DS/EN 1998-1/A1:2013 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings

German Institute for Standardization, primary antibody secondary antibody binding

  • DIN EN 1128:1995-11 Cement-bounded particleboards - Determination of hard body impact resistance; German version EN 1128:1995
  • DIN EN 13286-41:2022 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • DIN EN 13286-41:2020 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures; German and English version prEN 13286-41:2020
  • DIN CEN/TS 13286-54:2014-12*DIN SPEC 18094:2014-12 Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures; German version CEN/TS 13286-54:2014
  • DIN EN 14256:2007 Adhesives for non-structural wood applications - Test method and requirements for resistance to static load; German version EN 14256:2007
  • DIN EN 1464:2010 Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method; German version EN 1464:2010
  • DIN EN 1998-1-1:2022 Eurocode 8 - Design of structures for earthquake resistance - Part 1-1: General rules and seismic action; German and English version prEN 1998-1-1:2022
  • DIN EN 1998-1-1:2022-10 Eurocode 8 - Design of structures for earthquake resistance - Part 1-1: General rules and seismic action; German and English version prEN 1998-1-1:2022 / Note: Date of issue 2022-09-02*Intended as replacement for DIN EN 1998-1 (2010-12, t).
  • DIN EN 14869-1:2011 Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified); German version EN 14869-1:2011
  • DIN EN 302-2:2017 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
  • DIN EN 302-2:2023-05 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination; German version EN 302-2:2023
  • DIN EN 302-2:2023 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
  • DIN EN 1896:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation; German version EN 1896:2001
  • DIN EN 1998-1:2010-12 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings; German version EN 1998-1:2004 + AC:2009 / Note: To be replaced by DIN EN 1998-1-1 (2022-10, t).*To be amended by DIN EN 1998-1/...
  • DIN EN 1998-1/A1:2013-05 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings; German version EN 1998-1:2004/A1:2013
  • DIN EN ISO 14713-1:2010 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2009); German version EN ISO 14713-1:2009
  • DIN EN 12607-1:2023-04 Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method; German and English version prEN 12607-1:2023 / Note: Date of issue 2023-03-24*Intended as replacement for DIN EN 12607...
  • DIN EN 12607-1:2015-01 Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method; German version EN 12607-1:2014
  • DIN EN 12607-3:2015-01 Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 3: RFT Method; German version EN 12607-3:2014
  • DIN EN 1998-1:2006 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings; German version EN 1998-1:2004
  • DIN EN ISO 11343:2019-10 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method (ISO 11343:2019); German version EN ISO 11343:2019
  • DIN EN 1543:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers; German version EN 1543:1998

Hunan Provincial Standard of the People's Republic of China, primary antibody secondary antibody binding

  • DB43/T 2029-2021 Technical regulations for "one two three" reduction and control of drug-resistant weeds in paddy fields

AENOR, primary antibody secondary antibody binding

  • UNE-EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • UNE-EN 14256:2007 Adhesives for non-structural wood applications - Test method and requirements for resistance to static load
  • UNE-EN 302-2:2013 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
  • UNE-EN 12960:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance.
  • UNE-EN 1998-1:2011 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
  • UNE-EN 1998-1:2011/A1:2013 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings

AT-ON, primary antibody secondary antibody binding

  • OENORM EN 13286-41-2021 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
  • OENORM EN 302-2-2021 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
  • ONORM B 3639-1-1997 Asphalts for road construction and related purposes -Testing - Shear resistance in contact surfaces of asphalt layers
  • ONORM B 3639-2-1997 Asphalts for road construction and related purposes - Testing - Pull-off-resistance in contact surfaces of asphalt layers

American National Standards Institute （ANSI), primary antibody secondary antibody binding

  • ANSI/ASTM E1450:1992 Test Method for Tension Testing of Structural Alloys in Liquid Helium
  • ANSI/ASTM E2127:2001 Test Methods for Static Load Test for Combined Tensile and Transverse Load Resistance of Panel Wall Systems in Building Construction

CO-ICONTEC, primary antibody secondary antibody binding

ES-AENOR, primary antibody secondary antibody binding

SAE - SAE International, primary antibody secondary antibody binding

  • SAE AMS4348-1977 Honeycomb Core@ Aluminum Alloy@ Corrosion Inhibited For Sandwich Construction 5052@ 350 (175)
  • SAE AMS4348A-1984 Honeycomb Core@ Aluminum Alloy@ Corrosion Inhibited For Sandwich Construction 5052@ 350 (175)

Canadian Standards Association (CSA), primary antibody secondary antibody binding

  • CSA N289.4-2012 Testing procedures for seismic qualification of nuclear power plant structures, systems, and components (Second Edition)
  • CSA O122-M89-CAN/CSA-1989 Structural Glued-Laminated Timber Second Edition; General Instruction No 1 R(1999)

Taiwan Provincial Standard of the People's Republic of China, primary antibody secondary antibody binding

  • CNS 11879-1987 Rubber Antioxidant TMDQ (Poly-2,2,4-trimethyl-1,2-Dihydroquinoline)
  • CNS 11880-1987 Method of Test for Rubber Antioxidant TMDO (Poly-2,2,4-Trimethyl-1,2-Dihydroquinoline)
  • CNS 13144-1993 Method of Test for Internal Bonding Strength of Paper and Paperboard ( Using Tensile Strength Tester )

PT-IPQ, primary antibody secondary antibody binding

  • NP ENV 1998-1-2-2000 Eurocode 8:Design provisions for earthquake resistance of structures Part 1-2:General rules-General rules for buildings
  • NP ENV 1994-1-2-2000 Eurocode 4:Design of composite steel and concrete structures Part 1-2:General rules Structural fire design
  • NP ENV 1998-1-1-2000 Eurocode 8:Design provisions for earthquake resistance of structures Part 1-1:General rules-Seismic actions and general requirements for structures
  • NP ENV 1993-1-2-2000 Eurocode 3:Design of steel structures Part 1-2:General rules Structural fire design
  • NP ENV 1995-1-2-2000 Eurocode 5:Design of timber structures Part 1-2:General rules Structural fire design
  • NP ENV 1996-1-2-2000 Eurocode 6:Design of masonry structures Part 1-2:General rules Structural fire design
  • NP ENV 1992-1-2-2000 Eurocode 2:Design of concrete structures Part 1-2:General rules Structural fire design

GM North America, primary antibody secondary antibody binding

  • GM 9982285-2009 Adhesive, One-Part, Structural, Fracture Toughened, Full Temperature Spectrum

Japanese Industrial Standards Committee (JISC), primary antibody secondary antibody binding

  • JIS G 5111:1991 High tensile strength carbon steel castings and low alloy steel castings for structural purposes

ACI - American Concrete Institute, primary antibody secondary antibody binding

  • ACI SP-313-2017 Proceedings of the First ACI & JCI Joint Seminar: Design of Concrete Structures Against Earthquake and Tsunami Disasters

HU-MSZT, primary antibody secondary antibody binding

国家质量监督检验检疫总局, primary antibody secondary antibody binding

  • SN/T 4706-2016 Test method for tensile strength of joints in fiberboard box manufacturing for transportation packaging

CEN - European Committee for Standardization, primary antibody secondary antibody binding

  • DD ENV 1998-1-1-1994 Eurocode 8 - Design Provisions for Earthquake Resistance of Structures - Part 1-1: General Rules - Seismic Actions and General Requirements for Structures
  • DD ENV 1998-1-2-1994 Eurocode 8 - Design Provisions for Earthquake Resistance of Structures - Part 1-2: General Rules - General Rules for Buildings
  • DD ENV 1998-1-4-1996 Eurocode 8 - Design Provisions for Earthquake Resistance of Structures - Part 1-4: General Rules - Strengthening and Repair of Buildings

工业和信息化部, primary antibody secondary antibody binding

  • HG/T 5197-2017 Test Method for Hydration Resistance of Carbon Monoxide Sulfur Tolerant Shift Catalysts

AASHTO - American Association of State Highway and Transportation Officials, primary antibody secondary antibody binding

  • M 253-2005 Standard Specification for Structural Bolts@ Alloy Steel@ Heat-Treated@ 150 ksi Minimum Tensile Strength

ES-UNE, primary antibody secondary antibody binding

  • UNE 41210:2022 Test methods for bituminous mixtures. Resistance to structural cracking and fatigue with UGR-FACT
  • UNE-EN 302-2:2018 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
  • UNE-EN 1998-1:2018 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings.
  • UNE-EN ISO 11343:2020 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method (ISO 11343:2019)
  • UNE-EN IEC 61558-1:2021 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests

Aerospace, Security and Defence Industries Association of Europe (ASD), primary antibody secondary antibody binding

  • ASD-STAN PREN 2667-1-1996 Aerospace Series Non-Metallic Materials Foaming Structural Adhesives Test Methods Part 1: Tensile Single-Lap Shear (Edition P 1)

Defense Logistics Agency, primary antibody secondary antibody binding

Military Standards (MIL-STD), primary antibody secondary antibody binding

RO-ASRO, primary antibody secondary antibody binding

  • STAS 9330-1984 Railway and road steel bridges JOINTS BY HIGH RESISTANT PRE-TENSIONAL BOLTS Execution and design rules

Aerospace Industries Association/ANSI Aerospace Standards, primary antibody secondary antibody binding

  • AIA/NAS NASM6812-2006 Fasteners, Externally Threaded Alloy Steel, Corrosion Resistant Steel, Aluminum 60,000 PSI to 125,000 PSI Rev 2

BE-NBN, primary antibody secondary antibody binding

未注明发布机构, primary antibody secondary antibody binding

  • BS EN 1998-1:2004(2005)/NA:2008 Eurocode 8 : Design of structures for earthquake resistance – Part 1 : General rules, seismic actions and rules for buildings
  • DIN EN 12607-3:2000 Bitumen and bituminous binders Determination of resistance to hardening under the influence of heat and air Part 3: RFT method

IN-BIS, primary antibody secondary antibody binding

International Electrotechnical Commission (IEC), primary antibody secondary antibody binding

  • IEC 61558-1:2017 RLV Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
  • IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests

KR-KS, primary antibody secondary antibody binding

  • KS C IEC 61558-1-2022 Safety of transformers, reactors, power supply units and combinations thereof — Part 1: General requirements and tests

NZ-SNZ, primary antibody secondary antibody binding

  Primary Antibody Secondary Antibody Hybridization, Primary Antibody Secondary Antibody Dilution, Primary antibody, secondary antibody blocking, Primary antibody and secondary antibody combined first, Primary antibody secondary antibody mix, primary antibody secondary antibody binding, How the primary antibody binds to the secondary antibody, How to combine primary and secondary antibodies, Primary Antibody Secondary Antibody Formula, Binding method of primary antibody and secondary antibody, Conjugated primary antibody, secondary antibody binding, Flow secondary antibody combined with primary antibody first, Dilute primary and secondary antibodies, Where does the secondary antibody bind to the primary antibody?, How to combine primary and secondary antibodies, How to bind the secondary antibody, Where does the secondary antibody bind to the primary antibody?, Primary antibody and secondary antibody combined first, How to combine primary and secondary antibodies.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved