ZH
RU
ES
test table
test table, Total:118 items.
In the international standard classification, test table involves: Paper and board, Diagnostic, maintenance and test equipment, Mechanical testing, Testing of metals, Aids for disabled or handicapped persons, Telecommunication terminal equipment, Processes of the textile industry, Motor cycles and mopeds, Protection against fire, Road vehicles in general, Rubber and plastics products, Leather technology, Furniture, Electronic display devices, Road engineering, Insulating materials, Document imaging applications, Graphic technology, Physics. Chemistry, Installations in buildings, Ceramics, Telecommunication systems, Construction materials, Surface treatment and coating, Non-ferrous metals, Open systems interconnection (OSI), Linear and angular measurements, Glass, Measurement of volume, mass, density, viscosity, AIRCRAFT AND SPACE VEHICLE ENGINEERING, Ventilators. Fans. Air-conditioners, Electrical and electronic testing, Electricity. Magnetism. Electrical and magnetic measurements, Acoustics and acoustic measurements, Vocabularies, Particle size analysis. Sieving, Environmental testing.
HU-MSZT, test table
Korean Agency for Technology and Standards (KATS), test table
- KS M 7077-2003 BOARD-DETERMINATION OF STIFFNESS BY TABER STIFFNESS TESTER
- KS M 7077-1974 BOARD-DETERMINATION OF STIFFNESS BY TABER STIFFNESS TESTER
- KS K 0636-2001 TESTING METHOD FOR COLORFASTNESS TO HOT PRESSING OF COTTON AND LINEN FABRIC
- KS K 0636-1980 TESTING METHOD FOR COLORFASTNESS TO HOT PRESSING OF COTTON AND LINEN FABRIC
- KS B ISO 10250:2003 Metallic materials－Hardness testing－Tables of Knoop hardness values for use in tests made on flat surfaces
- KS P ISO 7176-13:2019 Wheelchairs — Part 13: Determination of coefficient of friction of test surfaces
- KS C IEC 60514-2003(2013) Acceptance inspection of Class 2 alternating current－watthour meters
- KS B 5349-2013 Oil meter:Test methods
American National Standards Institute （ANSI), test table
American Society of Mechanical Engineers (ASME), test table
IN-BIS, test table
Standard Association of Australia （SAA）, test table
- AS 3696.13:1991 Wheelchairs - Determination of coefficient of friction of test surfaces
- AS 3696.13:1991(R2014)
- AS/NZS 4222.1:1994 Information technology - Open Systems Interconnection - Conformance test suite for the presentation layer - Test suite structure and test purposes for the presentation protocol
RU-GOST R, test table
- GOST R ISO 7176-13-1996 Wheelchairs. Methods of tests for determination of coefficient of friction of test surfaces
- GOST 25218-1982 Facsimile apparatus 02FA test-table. Technical requirements
TR-TSE, test table
- TS 2310-1976 Non- Destructive Testing- Metallographic Replica Technigues of Surface examination
CU-NC, test table
- NC 04-78-1987 Materials Testing. Determination of Superficially Hardened Layer Depth. Testing Methods
- NC 90-19-18-1987 Metrological AssuranceQuality Gager. Methods and Means of Verification
SAE - SAE International, test table
- SAE J1846-1998 Characterizing a Test Surface for Motorcycle Side Stand Retraction Performance Testing
- SAE J1846-1989 Characterizing a Test Surface for Motorcycle Side Stand Retraction Performance Testing@ Recommended Practice
- SAE J1846-2014 Characterizing a Test Surface for Motorcycle Side Stand Retraction Performance Testing
Society of Automotive Engineers (SAE), test table
- SAE J1846-2003 Characterizing a Test Surface for Motorcycle Side Stand Retraction Performance Testing
Taiwan Provincial Standard of the People's Republic of China, test table
- CNS 14964-13-2006 Wheelchairs - Part 13: Determination of coefficient of friction of test surfaces
German Institute for Standardization, test table
- DIN EN 14390:2007-04 Fire test - Large-scale room reference test for surface products; German version EN 14390:2007
- DIN EN ISO 17186:2012-03 Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO 17186:2011); German version EN ISO 17186:2011
- DIN 54378:2021-02 Testing of paper and board - Determination of the surface colony count (OKZ<(Index)s>)
- DIN EN ISO 17233:2017-05 Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2017); German version EN ISO 17233:2017
- DIN EN ISO 2420:2017-05 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017); German version EN ISO 2420:2017
- DIN 19051-3:2013-03 Test charts for micrography - Part 3: Test table for microfilming with planetary camera of technical drawings
- DIN 19051-3 Beiblatt 1:2013-03 Test charts for micrography - Part 3: Test table for microfilming with planetary camera of technical drawings; Supplement 1: Neutral density cards for practical use
- DIN EN ISO 18771:2020-11 Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper (ISO 18771:2019); German version EN ISO 18771:2020
- DIN EN 1288-2:2000-09 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000 / Note: To be replaced by DIN EN ISO 1288-2 (2007-10).
- DIN EN 1288-5:2000-09 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas; German version EN 1288-5:2000 / Note: To be replaced by DIN EN ISO 1288-5 (2007-10).
AENOR, test table
- UNE 111914-13:1995 WHEELCHAIRS. PART 13: DETERMINATION OF COEFFICIENT OF FRICTION OF TEST SURFACES.
- UNE-EN 14390:2007 Fire test - Large-scale room reference test for surface products
- UNE 7018:2000 Materials tests. Rules for expressing some numerical specifications of materials tests.
- UNE 21378:1986 TESTING EQUIPMENT FOR ELECTRICAL ENERGY METERS.
- UNE-EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas.
- UNE-EN 1288-2:2000 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas.
KR-KS, test table
Association Francaise de Normalisation, test table
- NF ISO 7176-13:1990 Fauteuils roulants - Partie 13 : détermination du coefficient de frottement des surfaces d'essai
- NF EN 14390:2007 Essais au feu - Essai de référence dans une pièce à grande échelle pour les produits de surface
- NF ISO 10844:2014 Acoustique - Spécification des surfaces d'essai pour le mesurage du bruit émis par les véhicules routiers et leurs pneumatiques
- NF EN 2078:2002 Série aérospatiale - Matériaux métalliques - Fiche de fabrication, fiche d'essais, rapport de contrôle et d'essais - Définition, principes généraux, préparation et approbation
- NF EN ISO 22476-8:2018 Reconnaissance et essais géotechniques - Essais en place - Partie 8 : essai au pressiomètre refoulant
- NF C20-769:1998 Environmental testing. Part 2 : tests. Test Te : solderability testing of electronic components for surface mount technology by the wetting balance method.
Danish Standards Foundation, test table
- DS/EN 14390:2007 Fire test - Large-scale room reference test for surface products
- DS/ISO/TR 9705-2:2002 Reaction-to-fire tests - Full-scale room test for surface products - Part 2: Technical background and guidance
- DS/EN 1288-2:2001 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
Lithuanian Standards Office , test table
- LST EN 14390-2007 Fire test - Large-scale room reference test for surface products
- LST EN ISO 18771:2020 Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper (ISO 18771:2019)
- LST EN 1288-2-2002 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
AT-ON, test table
- ONORM M 7443 Teil.3-1989 Gas appliances with atmospheric burners; requirements, marking, testing, fest tables and test pressures
- ONORM M 1343-1995 Control of measuring and test equipment - Testing Instruction for dial gauges
The American Road & Transportation Builders Association, test table
- AASHTO T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
- AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, test table
AASHTO - American Association of State Highway and Transportation Officials, test table
- T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
CZ-CSN, test table
- CSN 64 7031-1982 Testing of synthetic leather. Rub and scuff resistance of finish
- CSN 91 0210 Cast.15-1979 Testing o! furnitura sarface coating. Pesistnce of the coai. to the burning cigarette
- CSN 91 0277-1987 Furniture. Testing the furniture surface coating. Method of determining the surface impact resistance
- CSN 66 6129-1990 Testing of auxiliaries. Surface active agents. Determination of wetting po- wer by immersion
- CSN 01 3820-1987 Reprography. Legibility test charts. Determination of the legibility limit
- CSN 01 5051-1974 Eddy-current testing. Glossary of terms.
- CSN IEC 736:1992 Testing equipment for electrical energy meters
TIA - Telecommunications Industry Association, test table
- TSB62-7-2000 ITM-7 Characterization of Fiber Strip Damage by Dynamic Tensile Testing
Group Standards of the People's Republic of China, test table
- T/SXMES 14-2022 Evaluation method of surface temperature for metal material fatigue limit test
- T/GDSHJXH 003-2021 Precious metal alloy color test and expression method
British Standards Institution (BSI), test table
- BS IEC 63211-3-5:2020 Durability test methods for electronic displays - Mechanical tests. Surface durability
- BS 476-33:1993 Fire tests on building materials and structures. Full-scale room test for surface products
- BS EN ISO 17233:2017 Tracked Changes. Leather. Physical and mechanical tests. Determination of cold crack temperature of surface coatings
- BS EN 933-6:2022 Tracked Changes. Tests for geometrical properties of aggregates. Assessment of surface characteristics. Flow coefficient of aggregates
- BS EN 12350-5:2019 Tracked Changes. Testing fresh concrete. Flow table test
- BS EN ISO 18771:2020 Anodizing of aluminium and its alloys. Method to test the surface abrasion resistance using glass-coated abrasive paper
- 19/30390725 DC BS EN IEC 63211-3-5. Durability test methods for electronic displays. Part 3-5. Mechanical tests. Surface durability
- BS ISO 21773:2021 Methods of test and characterization of performance for energy recovery components
- BS 7694:1993 Glossary of terms for test sieves and test sieving
ESDU - Engineering Sciences Data Unit, test table
- TM 167-2011 Mumeter Mk 6: a continuous friction measuring device. Evaluation on test surfaces at Nantes
YU-JUS, test table
- JUS N.A5.789-1994 Basic environmental testing procedures - Test Ue:Robustness of the terminations of surface mounting devices (SMD) in the mounted state
- JUS B.H8.070-1987 Petroleum pro?ucts testing. Determination of surface and interface tension. Ring metho?
SG-SPRING SG, test table
- SS 78 Pt.B2-1992 Testing Concrete Part B2 : Recommendations For Surface Hardness Testing By Rebound Hammer
Indonesia Standards, test table
- SNI 4427-2008 Testing methods of hardness surface frictional properties using British Pendulum Tester (BPT)
- SNI 04-3874-1995 Testing equipment of electric energy meters
IL-SII, test table
- S.I.692 Pt.102-1971 TESTING OF CLEANING MATF IALS BASED ON SYNTHETIC SURFACE ACTIVE AGENTS: TEST FOR TYPE OF SURFACE ACTIVE AGENT
ES-UNE, test table
- UNE-EN ISO 17233:2018 Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2017)
- UNE-EN ISO 2420:2018 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017)
- UNE-EN ISO 18771:2021 Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper (ISO 18771:2019)
- UNE-EN IEC 60512-99-002:2022 Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (Endorsed by Asociación Española de Normalización in April of 2022.)
- UNE-EN IEC 60512-99-002:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (Endorsed by Asociación Española de Normalización in June of 2019.)
未注明发布机构, test table
- BS 1881-202:1986(1998) Testing concrete — Part 202 : Recommendations for surface hardness testing by rebound hammer
American Society for Testing and Materials (ASTM), test table
- ASTM A937/A937M-12 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
- ASTM A937/A937M-06 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
- ASTM C1495-07 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
- ASTM E670-09(2020) Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
BE-NBN, test table
European Committee for Standardization (CEN), test table
- EN ISO 10808:2010 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010)
- EN ISO 18771:2020 Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper (ISO 18771:2019)
Japanese Industrial Standards Committee (JISC), test table
American Industrial Hygiene Association （AIHA), test table
GM Europe, test table
工业和信息化部, test table
- YS/T 679-2018 Surface photovoltage method for measuring minority carrier diffusion length in extrinsic semiconductors
International Organization for Standardization (ISO), test table
- ISO 18771:2019 Anodizing of aluminium and its alloys — Method to test the surface abrasion resistance using glass-coated abrasive paper
- ISO 21773:2021 Methods of test and characterization of performance for energy recovery components
Military Standard of the People's Republic of China-General Armament Department, test table
- GJB 2765.3-1996 Data network protocol consistency test tree table combination representation
SE-SIS, test table
Military Standards (MIL-STD), test table
Professional Standard - Post and Telecommunication, test table
Professional Standard - Electron, test table
International Electrotechnical Commission (IEC), test table