ZH
RU
ES
table test
table test, Total:132 items.
In the international standard classification, table test involves: Measurement of volume, mass, density, viscosity, Electrical and electronic testing, Telecommunication terminal equipment, Electricity. Magnetism. Electrical and magnetic measurements, Acoustics and acoustic measurements, Thermodynamics and temperature measurements, Geology. Meteorology. Hydrology, Construction materials, Surface treatment and coating, Road engineering, Road vehicle systems, Furniture, Non-metalliferous minerals, Electrical accessories, Linear and angular measurements, Horology, Installations in buildings, Electrical wires and cables, Paper and board, Testing of metals, Domestic electrical appliances in general, Electromechanical components for electronic and telecommunications equipment, Power stations in general, Open systems interconnection (OSI).
Korean Agency for Technology and Standards (KATS), table test
Indonesia Standards, table test
SE-SIS, table test
Professional Standard - Post and Telecommunication, table test
Professional Standard - Electron, table test
CZ-CSN, table test
AENOR, table test
International Electrotechnical Commission (IEC), table test
- IEC TR 60736:1982 Testing equipment for electrical energy meters
- IEC 62057-1:2023 Electrical energy meters - Test equipment, techniques and procedures - Part 1: Stationary meter test units (MTUs)
American National Standards Institute (ANSI), table test
- BS EN IEC 62057-1:2023 Electrical energy meters. Test equipment, techniques and procedures Stationary meter test units (MTUs) (British Standard)
- BS EN ISO 4064-2:2017+A11:2022 Water meters for cold potable water and hot water Test methods (British Standard)
- ANSI C12.9-2005 Test Switches for Transformer-Rated Meters
- ANSI/ASTM A912:1993 Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Rodial Specimens
HU-MSZT, table test
European Committee for Electrotechnical Standardization(CENELEC), table test
- FprEN IEC 62057-1:2022 Electrical energy meters - Test equipment, techniques and procedures - Part 1: Stationary meter test units (MTUs)
ES-UNE, table test
- UNE-EN IEC 62057-1:2023 Electrical energy meters - Test equipment, techniques and procedures - Part 1: Stationary meter test units (MTUs) (Endorsed by Asociación Española de Normalización in June of 2023.)
- IEEE 2960-2023 IEEE Guide for Testing Equipment for Direct Current Electrical Energy Meters
- UNE-EN 12350-5:2020 Testing fresh concrete - Part 5: Flow table test
- UNE-EN IEC 60512-99-002:2022 Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (Endorsed by Asociación Española de Normalización in April of 2022.)
- UNE-EN IEC 60512-99-002:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (Endorsed by Asociación Española de Normalización in June of 2019.)
- UNE 68068-1:1986 ERRATUM VACUUM REGULATORS FOR MILKING MACHINES. PERFORMANCE. TESTS
Hebei Provincial Standard of the People's Republic of China, table test
Inner Mongolia Provincial Standard of the People's Republic of China, table test
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, table test
IN-BIS, table test
GOSTR, table test
British Standards Institution (BSI), table test
- 21/30427990 DC BS EN 62057-3. Test equipment, techniques and procedures for electrical energy meter. Part 3. Automatic Meter Testing System (AMTS)
- BS EN 12350-5:2019 Tracked Changes. Testing fresh concrete. Flow table test
- 20/30337815 DC BS EN IEC 62057-1. Test equipment, techniques and procedures for electrical energy meters. Part 1. Stationary Meter Test Units (MTU)
- BS EN IEC 60512-99-002:2022 Connectors for electrical and electronic equipment. Tests and measurements - Endurance test schedules. Test 99b: Test schedule for unmating under electrical load (IEC 60512-99-002:2022)
- 20/30427721 DC BS EN 60512-99-002. Connectors for electrical and electronic equipment. Tests and measurements. Part 99-002. Endurance test schedules. Test 99b: Test schedule for unmating under electrical load
National Metrological Verification Regulations of the People's Republic of China, table test
Association Francaise de Normalisation, table test
Lithuanian Standards Office , table test
Danish Standards Foundation, table test
CEN - European Committee for Standardization, table test
- PREN 12350-5-2017 Testing fresh concrete - Part 5: Flow table test
- EN 1730:2000 Domestic Furniture - Tables - Test Methods for Determination of Strength@ Durability and Stability
German Institute for Standardization, table test
Institute of Electrical and Electronics Engineers (IEEE), table test
- IEEE P2960/D8, June 2022 IEEE Draft Guide for Testing Equipment for Direct Current Electrical Energy Meters
- IEEE P2960/D8.1, October 2022 IEEE Apprvoved Draft Guide for Testing Equipment for Direct Current Electrical Energy Meters
- IEEE P2960 IEEE Approved Draft Guide for Testing Equipment for Direct Current Electrical Energy Meters
- IEEE Std C12.9-1993 American National Standard for Test Switches for Transformer-Rated Meters(ANSI/IEEE)
NEMA - National Electrical Manufacturers Association, table test
- NEMA UTE S1-2018 NEMA Comments on the University of Twente Electronic Meter Tests
- NEMA 103-1951 "TEST BLOCKS AND CABINETS FOR THE INSTALLATION OF SELF-CONTAINED ""A"" BASE WATTHOUR METERS"
American Society for Testing and Materials (ASTM), table test
- ASTM E670-09(2020) Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
U.S. Air Force, table test
BR-ABNT, table test
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., table test
European Committee for Standardization (CEN), table test
- EN 1730:2012 Furniture - Tables - Test methods for the determination of stability, strength and durability
PL-PKN, table test
CU-NC, table test
- NC 54-288-1984 Construction Materials and Products. Procedure for Pe'rforming Gaging Tests for Determining the Hydrogeological Parameters. Testing Method
- NC 04-78-1987 Materials Testing. Determination of Superficially Hardened Layer Depth. Testing Methods
YU-JUS, table test
AT-ON, table test
- ONORM M 1343-1995 Control of measuring and test equipment - Testing Instruction for dial gauges
- ONORM M 7443 Teil.3-1989 Gas appliances with atmospheric burners; requirements, marking, testing, fest tables and test pressures
- ONORM M 1342-3-1994 Control of measuring and test equipment - Testing Instruction for internal micrometers
RU-GOST R, table test
- GOST R 50193.3-1992 Measurement of water flow in closed conduits. Meters for cold potable water. Test methods and equipment
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., table test
National Electrical Manufacturers Association(NEMA), table test
International Telecommunication Union (ITU), table test
- ITU-T Q.3945-2011 (Pre-Published) The types and list of NGN services testing on the Model networks. Test set I
CENELEC - European Committee for Electrotechnical Standardization, table test
Defense Logistics Agency, table test
Professional Standard - Electricity, table test
- DL/T 826-2002 On-site Testing equipment for alternating current electricity meters
IL-SII, table test
- S.I.692 Pt.102-1971 TESTING OF CLEANING MATF IALS BASED ON SYNTHETIC SURFACE ACTIVE AGENTS: TEST FOR TYPE OF SURFACE ACTIVE AGENT
Canadian Standards Association (CSA), table test
- CSA Z5100-2014 Nanomatériaux à base de cellulose - Méthodes d’essai pour la caractérisation (première édition)
European Telecommunications Standards Institute (ETSI), table test
- ETSI ES 202 553-2008 Methods for Testing and Specification (MTS); TPLan: A notation for expressing Test Purposes V1.1.1
- ETSI ES 202 553-2009 Methods for Testing and Specification (MTS); TPLan: A notation for expressing Test Purposes (V1.2.1)
Standard Association of Australia (SAA), table test
- AS/NZS 4222.1:1994 Information technology - Open Systems Interconnection - Conformance test suite for the presentation layer - Test suite structure and test purposes for the presentation protocol
TR-TSE, table test
- TS 2310-1976 Non- Destructive Testing- Metallographic Replica Technigues of Surface examination