ZH
RU
ES

True Density Meter

True Density Meter, Total:497 items.

In the international standard classification, True Density Meter involves: Fuels, Coals, Refractories, Products of the chemical industry, Protection against fire, Insulating fluids, Metalliferous minerals, Tobacco, tobacco products and related equipment, Conducting materials, Electricity. Magnetism. Electrical and magnetic measurements, Medical equipment, Organic chemicals, Ceramics, Plastics, Mining and quarrying, Measurement of volume, mass, density, viscosity, Nuclear energy engineering, Equipment for petroleum and natural gas industries, Analytical chemistry, Electronic tubes, Crude petroleum, Natural gas, Road engineering, Optics and optical measurements, Photography, Construction materials, Vacuum technology, Soil quality. Pedology, Textile fibres, Glass, Non-destructive testing, Equipment for the paper industry, Pharmaceutics, Hydraulic energy engineering, Power stations in general, Metrology and measurement in general, Magnetic materials, Paper and board, Waxes, bituminous materials and other petroleum products, Particle size analysis. Sieving, Powder metallurgy, Rubber, Materials for the reinforcement of composites, Adhesives, Wood-based panels, Wood, sawlogs and sawn timber, Beverages, Non-metalliferous minerals, Cereals, pulses and derived products, Milk and milk products, Electrical wires and cables, Products of the textile industry, Pesticides and other agrochemicals, Headgear. Clothing accessories. Fastening of clothing, Wood technology processes, Reinforced plastics, Water quality, Paints and varnishes, Protection against dangerous goods, Radiation measurements, Cellular materials, Fertilizers, Petroleum products in general, Fruits. Vegetables.


Taiwan Provincial Standard of the People's Republic of China, True Density Meter

  • CNS 11121-1984 Method for Determination of True Relative Density, Apparent Relative Density and Porosity of Coke
  • CNS 620-1998 Method for determination of true density of refractory materials
  • CNS 7735-1981 Method of Test for Density of Plastics by the Density - Gradient Technique
  • CNS 14314-1999 Method of test for particle density of fine ceramic powder
  • CNS 971-1996 Method of Test for Canned Food-Determimation for Degree of Vaccum

Professional Standard - Coal, True Density Meter

  • MT 39-1987 Method for Determination of True Density of Rock
  • MT/T 39-1987 Method for Determination of True Density of Rock
  • MT/T 713-1997 Determination of true density for mine dust
  • MT/T 678-1997 General technical condition of borehole density logging instrument for mining

Professional Standard - Petrochemical Industry, True Density Meter

  • SH/T 0033-1990 Determination of true density of petroleum coke
  • SH/T 0221-1992 Liquefied Petroleum Gas Density or Relative Density Determination (Pressure Densitometer Method)
  • SH/T 0685-1999 Liquified petroleum gases.Determination of density.Pressure density bottle method

National Metrological Verification Regulations of the People's Republic of China, True Density Meter

ZA-SANS, True Density Meter

  • SANS 5072:2005 Brown coals and lignites - Determination of true relative density and apparent relative density
  • SANS 1014:1985 Coke - Determination of true relative density, apparent relative density and porosity
  • SANS 61034-1:2006 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus
  • SANS 6175:2004 Fibreboard - Determination of density
  • SANS 2781:2003 Rubber, vulcanized - Determination of density

CZ-CSN, True Density Meter

Lithuanian Standards Office , True Density Meter

  • LST ISO 5018:1998 Refractory materials. Determination of true density
  • LST EN 993-2-2001 Methods of test for dense shaped refractory products - Part 2: Determination of true density
  • LST EN 993-2-2002/A1-2004 Methods of test for dense shaped refractory products - Part 2 : Determination of true density
  • LST EN 1936-2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
  • LST EN 1094-4-2001 Insulating refractory products - Part 4: Determination of bulk density and true porosity
  • LST EN ISO 1973:2000 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:1995)
  • LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • LST EN 542-2003 Adhesives - Determination of density
  • LST EN 323-1999 Wood-based panels - Determination of density
  • LST EN 772-4-2000 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
  • LST EN 993-1-2001 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity

RU-GOST R, True Density Meter

  • GOST 8066-1977 Black powders. Real density determination method
  • GOST 2160-2015 Solid mineral fuel. Determination of true and apparent density
  • GOST ISO 5017-2014 Dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
  • GOST 34721-2021 Natural gas. Determination of density by picknometric method
  • GOST 32763-2014 Automobile roads of general use. Mineral powder. The method of determining the true density
  • GOST 2409-2014 Refractories. Method for determination of bulk density, apparent and true porosity, water absorption
  • GOST 2409-1980 Refractory materials and articles. Method of water absorption, bulk density, apparent and true porosities determination
  • GOST 32722-2014 Automobile roads of general use. Natural and crushed sand. Determination of the true density
  • GOST 22091.14-1986 X-ray devices. The method of measuring the energy flow density (photon flux density) of X-radiation
  • GOST 15139-1969 Plastics. Methods for the determination of density (mass density)
  • GOST R 56300-2014 Refractories and refractory raw materials. Methods of true density determination
  • GOST 267-1973 Rubber. Methods for the determination of density
  • GOST 17818.8-1990 Graphite. Method for determination of density
  • GOST 22163-1976 Rice. Method of determination of density
  • GOST R 50203.3-1992 Smallwares. Method for determination of density
  • GOST 32558-2013 Coal. Determination of bulk density
  • GOST R 54246-2010 Coal. Determination of bulk density
  • GOST 23785.4-2001 Cord fabric. Method for determination of linear dimensions, density according to warp and weft, surface density
  • GOST 23785.4-1979 Cord fabric. Method for determination of linear dimensions, density according to warp and welf, surface density
  • GOST 32821-2014 Automobile roads of general use. Rubble and sand slag. The definition of true density and porosity

Group Standards of the People's Republic of China, True Density Meter

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, True Density Meter

  • GB/T 217-1996 Determination of true relative density of coal
  • GB/T 217-2008 Determination of true relative density of coal
  • GB/T 4511.4-1984 Coke--Determination of true relative density
  • GB/T 6155-1985 Carbon materials--Determination of the true density
  • GB/T 24586-2009 Iron ores.Determination of apparent density，true density and porosity
  • GB/T 6155-2008 Carbon materials-Determination of the true density or porosity
  • GB/T 24203-2009 Carbon materials.Determination of the true density or true poroous.Boiling method
  • GB/T 4511.1-2008 Coke.Determination of true relative density apparent relative density and porosity
  • GB/T 8330-2008 Determination of specific gravity of ion exchange resins in wet state
  • GB/T 8330-1987 Method for the determination of true density of ion exchange resins in wet state
  • GB/T 15472-2012 General specification for distortion measure instrument
  • GB/T 15472-1995 Generic specification and test method for distortion meters
  • GB/T 11718.4-1989 Medium density fiberboard--Determination of density
  • GB/T 4472-2011 Detemination of density and relative density for chemical products
  • GB/T 23561.2-2009 Methods for determining the physical and mechanical properties of coal and rock.Part 2:Methods for determining the true density of coal and rock
  • GB/T 4472-1984 General rule for determination of density and relative density for chemical products
  • GB/T 2997-2015 Test method for bulk density,apparent porosity and true porosity of dense shaped refractory products
  • GB/T 2997-2000 Test method for bulk density,apparent porosity and true porosity of dense shaped refractory products
  • GB/T 41940-2022 Rubber—Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
  • GB/T 208-2014 Test method for determinging cement density
  • GB/T 32776-2016 Test method of density for pesticides
  • GB/T 208-1994 Standard test method for cement density
  • GB 1666-1988 Plasticizers--Determination of density
  • GB/T 1933-1991 Method for determination of the density of wood
  • GB/T 1933-2009 Method for determination of the density of wood
  • GB/T 30019-2013 Carbon fiber.Determination of density
  • GB/T 4668-1995 Textiles--Woven fabrics--Determination of number of threads per unit length
  • GB/T 21782.2-2008 Coating powders.Part 2: Determination of density by gas comparison pyknometer (referee method)
  • GB/T 13566.1-2008 Fertilizers.Determination of bulk density.Part 1:Loose density
  • GB/T 29617-2013 Determination of density,relative density,and API gravity of liquids by digital density meter
  • GB/T 2998-2015 Test method for bulk density and true porosity of shaped heat insulating refractory products
  • GB/T 2998-2001 Shaped insulating refractory products-Determination of bulk density and true porosity

Professional Standard - Tobacco, True Density Meter

  • YC/T 473-2013 Determination of apparent density,true density and inner pore volume of cut tobacco

Association Francaise de Normalisation, True Density Meter

  • NF M03-039*NF ISO 1014:2004 Coke - Determination of true relative density, apparent relative density and porosity.
  • NF M01-018*NF ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
  • NF M03-039:1982 SOLID FUELS. COKE. DETERMINATION OF TRUE RELATIVE DENSITY,APPARENT RELATIVE DENSITY AND POROSITY.
  • NF B40-318*NF ISO 5017:2013 Dense shaped refractory products - Determination of bulk density, apparent porosity and true porosity
  • NF B40-301*NF EN 993-2:1995 Methods of test for dense shaped refractory products. Part 2 : determination of true density.
  • NF EN ISO 1973:2021 Fibres textiles - Détermination de la masse linéique - Méthode gravimétrique et méthode au vibroscope
  • NF EN 993-18:2002 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 18 : détermination de la masse volumique apparente des matériaux en grains par la méthode à l'eau sous vide
  • NF EN 993-17:1999 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 17 : détermination de la masse volumique apparente des matériaux en grains par la méthode au mercure sous vide.
  • NF B40-344*NF EN 1094-4:1995 Insulating refractory products. Part 4 : determination of bulk density and true porosity.
  • NF EN 12697-5:2018 Mélanges bitumineux - Méthodes d'essai - Partie 5 : masse volumique réelle (MVR)
  • NF G07-350*NF EN ISO 1973:2021 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
  • NF G07-350:1996 Textile fibres. Determination of linear density. Gravimetric method and vibroscope method.
  • NF EN 1097-7:2022 Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 7 : détermination de la masse volumique réelle du filler - Méthode au picnomètre
  • NF T25-100:1996 Carbon fibre. Determination of density.
  • NF B51-005:1985 Wood. Determination of density.
  • NF B51-122*NF EN 323:1993 Wood-based panels. Determination of density.
  • NF T76-090*NF EN 542:2003 Adhesives - Determination of density.
  • NF T25-100*NF ISO 10119:2003 Carbon fibre - Determination of density
  • NF T76-090:1995 ADHESIVES. DETERMINATION OF DENSITY. (EUROPEAN STANDARD EN 542).
  • NF EN 542:2003 Adhésifs - Détermination de la masse volumique
  • NF EN 323:1993 Panneaux à base de bois - Détermination de la masse volumique
  • NF ISO 10119:2003 Fibre de carbone - Détermination de la masse volumique
  • NF EN 1094-4:1995 Produits réfractaires isolants - Méthodes d'essai - Partie 4 : détermination de la masse volumique apparente et de la porosité réelle.
  • NF B40-340*NF EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum
  • NF B40-321*NF EN 993-1:2018 Methods of test for dense shaped refractory products - Part 1 : determination of bulk density, apparent porosity and true porosity

CU-NC, True Density Meter

  • NC 82-05-5-1984 Wines. Testing Methods. Determination of Relatiy and Absolute Density
  • NC 41-32-2-1985 Leather. Conglomerate Determination of Density and Surface Density

Professional Standard - Light Industry, True Density Meter

Military Standard of the People's Republic of China-General Armament Department, True Density Meter

  • GJB/J 5230-2003 Calibration procedures for smoke density tester
  • GJB 209-1986 Gunpowder Density Determination (Density Bottle Method)
  • GJBz 20058.2-1991(XG1-2015) Method for Determination of Physical Constants of Poisons - Determination of Density (Density Bottle Method) Modification Sheet 1-2015

Korean Agency for Technology and Standards (KATS), True Density Meter

  • KS E ISO 1014-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 5072-2009(2019) Brown coals and lignites－Determination of true relative density and apparent relative density
  • KS E ISO 1014:2002 Coke-Determination of true relative density, apparent relative density and porosity
  • KS E ISO 1014:2022 Coke — Determination of true relative density, apparent relative density and porosity
  • KS L ISO 5017:2013 Dense shaped refractory products ? Determination of bulk density, apparent porosity and true porosity
  • KS L ISO 5017-2013(2018) Dense shaped refractory products?Determination of bulk density, apparent porosity and true porosity
  • KS A 0081-1989 Measuring methods of low pressures by discharge and ionization vacuum gauges
  • KS F 2495-2017(2022) Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
  • KS F 2496-2017 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
  • KS A ISO 5725-3-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 3：lntermediate measures of the precision of a standard measurement method
  • KS M 7096-2018 Paper — Determination of stiffness by Clark stiffness tester
  • KS F 2496-2017(2022) Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
  • KS F 2495-2017 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
  • KS A ISO 5725-5-2012(2022) Accuracy(trueness and precision) of measurement methods and results－Part 5：Alternative methods for the determination of the precision of a standard measurement method
  • KS L 6801-2012 Carbon fiber－Determination of density
  • KS F 2495-2012 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
  • KS C IEC 61034-1:2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
  • KS K 0512-2012 Test method for determination of number of wales and courses per unit length in knitted fabrics
  • KS K 0511-2009 Measuring method for thread per unit length in woven cloth
  • KS L 6801-2017 Carbon fiber－Determination of density
  • KS F 2200-1995 Wood-based panels-Determination of density
  • KS L 6801-2022 Carbon fibre — Determination of density
  • KS F 2200-2018 Wood-based panels — Determination of density
  • KS K 0511-1999 Measuring method for thread per unit length in woven cloth
  • KS K 0512-1967 Test method for determination of number of wales and courses per unit length in knitted fabrics
  • KS C IEC 60692:2009 Nuclear instrumentation-Density gauges utilizing ionizing radiation-Definitions and test methods
  • KS C IEC 60692-2009(2019) Nuclear instrumentation－Density gauges utilizing ionizing radiation－Definitions and test methods

International Organization for Standardization (ISO), True Density Meter

  • ISO 5072:2021 Brown coals and lignites — Determination of true relative density and apparent relative density
  • ISO 1014:1985 Coke; Determination of true relative density, apparent relative density and porosity
  • ISO 1014:1975 Coke — Determination of true relative density, apparent relative density and porosity
  • ISO 1014:2021 Coke — Determination of true relative density, apparent relative density and porosity
  • ISO 1014:1985/Cor 1:1994 Coke - Determination of true relative density, apparent relative density and porosity; Technical Corrigendum 1
  • ISO 5017:1998 Dense shaped refractory products - Determination of bulk density, apparent porosity and true porosity
  • ISO 5017:2013 Dense shaped refractory products - Determination of bulk density, apparent porosity and true porosity
  • ISO 14807:2001 Photography - Transmission and reflection densitometers - Method for determining performance
  • ISO 5017:1988 Dense shaped refractory products; determination of bulk density, apparent porosity and true porosity
  • ISO/FDIS 5725-1 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
  • ISO 5018:1983 Refractory materials; Determination of true density
  • ISO 13145:2012 Rubber - Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
  • ISO 10119:1992 Carbon fibre; determination of density
  • ISO 10119:2020 Carbon fibre — Determination of density
  • ISO 12154:2014 Determination of density by volumetric displacement - Skeleton density by gas pycnometry
  • ISO 23499:2008 Coal - Determination of bulk density
  • ISO 3805:1977 Plywood — Determination of density
  • ISO 2781:1975 Title missing - Legacy paper document
  • ISO 16305:2005 Butter - Determination of firmness
  • ISO 10119:2002 Carbon fibre - Determination of density
  • ISO 2781:1988 Rubber, vulcanized; determination of density
  • ISO 9427:1989 Wood-based panels; determination of density
  • ISO 822:1975 Particle boards — Determination of density
  • ISO 16305:2005|IDF 187:2005 Determination of density of butter
  • ISO/FDIS 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
  • ISO 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
  • ISO/PRF 5725-3 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
  • ISO 5725-3:2023 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
  • ISO 19685:2017 Vacuum technology - Vacuum gauges - Specifications, calibration and measurement uncertainties for Pirani gauges

British Standards Institution (BSI), True Density Meter

  • BS ISO 1014:2021 Coke. Determination of true relative density, apparent relative density and porosity
  • BS EN 993-2:1995 Methods of test for dense shaped refractory products. Determination of true density
  • BS ISO 5072:2013 Brown coals and lignites. Determination of true relative density and apparent relative density
  • 21/30423448 DC BS ISO 1014. Coke. Determination of true relative density, apparent relative density and porosity
  • BS ISO 5072:2021 Tracked Changes. Brown coals and lignites. Determination of true relative density and apparent relative density
  • 21/30426752 DC BS ISO 24477. Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for spinning rotor gauges
  • BS IEC 60692:1999 Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
  • BS EN ISO 1973:1996 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
  • BS EN ISO 1973:2021 Textile fibres. Determination of linear density. Gravimetric method and vibroscope method
  • BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
  • PD ISO/TR 18231:2016 Iron ores. Wavelength dispersive X-ray fluorescence spectrometers. Determination of precision
  • BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
  • BS ISO 13145:2012 Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
  • BS EN 993-1:2018 Tracked Changes. Methods of test for dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
  • BS ISO 10119:2002 Carbon fibre - Determination of density
  • BS EN 542:2003 Adhesives - Determination of density
  • BS EN 323:1993 Wood-based panels. Determination of density
  • BS ISO 16305:2005 Butter - Determination of firmness
  • BS ISO 18747-1:2018 Determination of particle density by sedimentation methods - Isopycnic interpolation approach
  • 20/30406526 DC BS EN ISO 1973. Textile fibres. Determination of linear density. Gravimetric method and vibroscope method
  • BS ISO 12154:2014 Determination of density by volumetric displacement. Skeleton density by gas pycnometry
  • BS ISO 10119:2020 Carbon fibre. Determination of density
  • BS ISO 13145:2023 Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
  • BS 2782-6 Methods 620A to 620D:1991 Methods of testing plastics. Dimensional properties. Determination of density and relative density of non-cellular plastics. Methods 620A to 620D:Determination of density and relative density of non-cellular plastics
  • BS EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Density gradient column method

Professional Standard - Electron, True Density Meter

  • SJ/T 10230-1991 Low distortion meter for Type ZN4112
  • SJ/T 10943-1996 Test method for granulometric distribution of alundum powder for vacuum tubes - Density balance method
  • SJ/T 10216-1991 Determination of density for magnetic oxide powders.Determination of tap density
  • SJ 20240-1993 Verification regulation of model HP4284A LCR precise measurement instruments
  • SJ/T 10215-1991 Determination of density for magnetic oxide powders.Determination of apparent density:Oscillating funnel method

RO-ASRO, True Density Meter

Professional Standard - Nuclear Industry, True Density Meter

Danish Standards Foundation, True Density Meter

  • DS/ISO 5072:2013 Brown coals and lignites - Determination of true relative density and apparent relative density
  • DS/EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2: Determination of true density
  • DS/EN 993-2:1995 Methods of test for dense shaped refractory products - Part 2: Determination of true density
  • DS/EN 1936:2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
  • DS/EN ISO 1973:1996 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
  • DS/ISO 1973:2021 Textile fibres – Determination of linear density – Gravimetric method and vibroscope method
  • DS/EN 1094-4:1996 Insulating refractory products - Part 4: Determination of bulk density and true porosity
  • DS/EN ISO 1973:2021 Textile fibres – Determination of linear density – Gravimetric method and vibroscope method (ISO 1973:2021)
  • DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • DS/EN 323:1993 Wood-based panels. Determination of density
  • DS/EN 542:2003 Adhesives - Determination of density
  • DS/EN 323:1994 Wood-based panels - Determination of density
  • DS/EN 772-4:1999 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
  • DS/EN 993-1:1995 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity

KR-KS, True Density Meter

  • KS E ISO 1014-2022 Coke — Determination of true relative density, apparent relative density and porosity
  • KS C IEC 61034-1-2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus

National Metrological Technical Specifications of the People's Republic of China, True Density Meter

轻工业部, True Density Meter

  • QB 1010-1991 Method for determination of true density of pigments for daily ceramic materials
  • QB 1052-1991 Initial wet strength tester

Professional Standard - Petroleum, True Density Meter

  • SY/T 6582.3-2003 The calibration for petroleum nuclear logging tool Part 3:The calibration for compensated density/litho-density tool
  • SY/T 6182-1996 Production Profile Logging Tool Calibration Procedure Fluid Density Logging Tool
  • SY/T 6579-2003 The calibration method for density tool
  • SY/T 6758-2009 Calibration method of lithological density log tool
  • SY/T 5877-2000 Technology procedure for compensated density logging tool maintenance

International Electrotechnical Commission (IEC), True Density Meter

  • IEC 61874:1998 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ("density logging")

未注明发布机构, True Density Meter

German Institute for Standardization, True Density Meter

  • DIN EN 993-2:1995-04 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995
  • DIN EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995/A1:2003
  • DIN EN 1936:2007-02 Natural stone test method - Determination of real density and apparent density, and of total and open porosity; German version EN 1936:2006
  • DIN EN ISO 1973:2021-12 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:2021); German version EN ISO 1973:2021
  • DIN EN 993-2/A1:2004-01 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995/A1:2003
  • DIN EN 993-17:1999-01 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
  • DIN EN 1094-4:1995-09 Insulating refractory products - Part 4: Determination of bulk density and true porosity of shaped products; German version EN 1094-4:1995
  • DIN 52182:1976-09 Testing of wood; determination of density
  • DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
  • DIN 4512-8:1993 Photographic sensitometry, determination of optical density; geometric conditions for transmission density
  • DIN CEN/TS 17189:2018-08*DIN SPEC 78003:2018-08 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry; German version CEN/TS 17189:2018
  • DIN EN 542:2003 Adhesives - Determination of density; German version EN 542:2003
  • DIN EN 323:1993-08 Wood-based panels; determination of density; German version EN 323:1993
  • DIN EN ISO 1973:2020 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO/DIS 1973:2020); German and English version prEN ISO 1973:2020
  • DIN 66137-2:2019-03 Determination of solid state density - Part 2: Gaspycnometry
  • DIN EN 323:1993 Wood-based panels; determination of density; German version EN 323:1993
  • DIN EN 542:2003-08 Adhesives - Determination of density; German version EN 542:2003
  • DIN EN 993-18:2002-11 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
  • DIN EN 993-1:2019 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity

Standard Association of Australia （SAA）, True Density Meter

  • AS 1774.6:2001 Refractories and refractory materials - Physical test methods - Determination of true density
  • AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block
  • AS 1774.6:2001(R2013)
  • AS 2378:1996 Density bottles
  • AS 2563:2019 Iron ores — Wavelength dispersive X-ray fluorescence spectrometers — Determination of precision
  • AS/NZS 2891.14.1.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Backscatter mode
  • AS 2341.7:1993 Methods of testing bitumen and related roadmaking products - Determination of density using a density bottle
  • AS/NZS 2891.14.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear thin-layer density gauge
  • AS 1289.5.8.5:1998 Methods of testing soils for engineering purposes - Soils compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block

Professional Standard - Commodity Inspection, True Density Meter

  • SN/T 0482-1995 High-speed determination of true relative density,apparentrelative density and porosity of coke for export
  • SN/T 0056-1992 Method for test of tinear density ofchemicat fibers for import.Vibration method
  • SN/T 2383-2009 Liquid chemical products.Determination of density and relative density.Digital density meter method

国家市场监督管理总局、中国国家标准化管理委员会, True Density Meter

  • GB/T 41485-2022 Nuclear instrumentation—Geophysical borehole instrumentation to determine rock density

Professional Standard - Ferrous Metallurgy, True Density Meter

  • YB 4091-1992 Method for measuring true density of carbon materials (distilled water boiling method)

UNKNOWN, True Density Meter

工业和信息化部, True Density Meter

American Society for Testing and Materials (ASTM), True Density Meter

  • ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
  • ASTM C729-05 Standard Test Method for Density of Glass by the Sink-Float Comparator
  • ASTM D2638-06 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
  • ASTM D2638-10 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
  • ASTM D5004-89(1999) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
  • ASTM D2638-10(2015)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
  • ASTM D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D6857-03 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D6857/D6857M-11 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D6857/D6857M-17 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D6857-09 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
  • ASTM B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter
  • ASTM B703-10 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
  • ASTM C729-11(2022) Standard Test Method for Density of Glass by the Sink-Float Comparator
  • ASTM D6857/D6857M-18 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D1505-98e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM D1505-85(1990)e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM D5004-89(2009) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
  • ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
  • ASTM D4052-09 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4052-96 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
  • ASTM D4052-96(2002)e1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
  • ASTM D1505-03 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • ASTM D4052-11 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D1505-68(1979) Standard Test Method for Density Of Plastics By The Density-Gradient Technique
  • ASTM D1505-18 Standard Test Method for Density of Plastics by the Density-Gradient Technique

Indonesia Standards, True Density Meter

  • SNI ISO 5016:2010 Shaped insulating refractory products - Determination of bulk density and true porosity
  • SNI ISO 5017:2010 Dense shaped refractory products - determination of bulk density, apparent porosity, and true porosity

VN-TCVN, True Density Meter

AENOR, True Density Meter

  • UNE-EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2 : Determination of true density
  • UNE-EN 993-2:1996 Methods of test for dense shaped refractory products - Part 2: Determination of true density
  • UNE-EN 1936:2007 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
  • UNE-EN 1094-4:1996 Insulating refractory products - Part 4: Determination of bulk density and true porosity
  • UNE 82009-4:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD.
  • UNE-EN ISO 1973:1996 TEXTILE FIBRES. DETERMINATION OF LINEAR DENSITY. GRAVIMETRIC METHOD ANd vibroscope method. (ISO 1973:1995).
  • UNE 82009-1:1998 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 1: GENERAL PRINCIPLES AND DEFINITIONS.
  • UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
  • UNE-EN 542:2003 Adhesives - Determination of density
  • UNE-EN 323:1994 WOOD-BASED PANELS. DETERMINATION OF DENSITY.
  • UNE 82009-5:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
  • UNE 40225-1:1974 IN WOOL. DETERMINATION OF SHORT TERM IRREGULARITY OF LINEAR DENSITY OF SILVERS, ROVING AND YARNS, BY MEANS OF AN ELECTRONIC EVENESS TESTER.
  • UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM
  • UNE-EN 993-1:1996 METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 1: DETERMINATION OF BULK DENSITY, APPARENT POROSITY AND TRUE POSORITY.

YU-JUS, True Density Meter

  • JUS B.H8.351-1987 Methods of analysis of coal andcoke. Determination of the true relative density, the apparent relative densi-ty and the p orosity of coke
  • JUS B.D8.312-1983 Refractories. Methods of fisical testing. Determination of the bulk deniity, apparent porosity and true porosity of dense shaped refractory products
  • JUS D.A1.044-1979 Test ofwood Determination ofdensity
  • JUS U.B1.014-1988 Testing ofsoils. Deteriftjjnation ofdensiv/
  • JUS D.A8.064-1985 Testing ofplywood. Determination ofdensity
  • JUS D.C8.114-1983 Testing of particle boards. Determination ofdensity
  • JUS B.D8.302-1984 Refractories. Methods of fisical testing. Determination of true density refractorl products and raw materials
  • JUS G.S2.023-1984 Leather. Determination of apparent density
  • JUS G.S2.123-1986 Rubber, vulcanized. Determination of density
  • JUS H.N8.205-1988 Testing of paper. Determinaticm of buJklng thickness and apparent density
  • JUS C.A2.028-1978 Metallic powders - determination ofapparent density by cup andfunnel method

IN-BIS, True Density Meter

PT-IPQ, True Density Meter

  • NP 3757-1989 SOLID FUELS Cokes Determination of true relative density, apparent relative density and porosity
  • NP 1695-1980

U.S. Military Regulations and Norms, True Density Meter

NL-NEN, True Density Meter

  • NEN 2620-1982 Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
  • NEN 2585-1983 Refractory products - Determination of true density of shaped and unshaped products and raw materials
  • NEN 5967-1988 Concrete - Determination of density
  • NEN-EN 323-1993 Wood-based panels. Determination of density

Professional Standard - Non-ferrous Metal, True Density Meter

  • YS/T 587.9-2006 Calcined coke for prebaked blocks. Testing methods. Part 9: Determination of real density
  • YS/T 63.8-2023 Carbonaceous materials used for the production of aluminium — Part 8:Determination of truth density — Pyknometric method
  • YS/T 63.9-2006 Carbonaceous materials used in the production of aluminium. Part 9:Determination of truth density by helium pyknometry method
  • YS/T 63.9-2012 Carbonaceous materials used in the production of aluminium.Part 9:Determination of truth density by helium pyknometry method

PL-PKN, True Density Meter

  • PN H04172-1993 Refractory materials. Determination of bulk density and true porosity of insulating products
  • PN R74007-1973 Cereals Determina?ion o? density
  • PN H04185-1992 Refractory materials. Determination of bulk density, apparent porosity, true porosity and water absorbability
  • PN C04215-1983 Rubber* Determination of density
  • PN H04184-1985 Refractory materials Determination of density
  • PN C89035-1992 Plastics. Methods for determining the density and relative density of non-cellular plastics

ES-UNE, True Density Meter

  • UNE-EN ISO 1973:2022 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:2021)
  • UNE-EN 993-1:2018 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity (Endorsed by Asociación Española de Normalización in January of 2019.)
  • UNE-CEN/TS 17189:2018 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry (Endorsed by Asociación Española de Normalización in May of 2020.)

Professional Standard - Pharmaceutical Packaging, True Density Meter

American Society of Mechanical Engineers (ASME), True Density Meter

  • ASME PTC 19.16-1965 Instruments and apparatus - Part 16: Density Determinations solids and liquids

TR-TSE, True Density Meter

  • TS 768-1969 DETERMINATION OF THE DENSITY AND RELATTVE DENSITY OF ESSENTIAL OILS
  • TS 2827-1977 VULCANIZED RUBBERS - DETERMINATION OP DENSITY
  • TS 3110-1978 PLYWOOD - DETERMINATION OF DENSITY

Professional Standard - Water Conservancy, True Density Meter

  • SL 275-2014 Field test methods for nuclear density-moisture gauges.Part 2: Field test methods for nuclear depth density-moisture probes
  • SL 275-2001 Field test methods for nuclear density-moisture gauges
  • SL 275.1-2001(条文说明) Field test methods for nuclear surface density-moisture gauges(explanation)
  • SL 275.1-2001 Field test methods for nuclear surface density-moisture gauges
  • SL 275.2-2001(条文说明) Field test methods for nuclear depth density-moisture probes(explanation)
  • SL 275.2-2001 Field test methods for nuclear depth density-moisture probes

水利部, True Density Meter

  • SL/T 275-2014 Nuclear moisture-densitometer field test procedures

SE-SIS, True Density Meter

Professional Standard - Electricity, True Density Meter

  • DL/T 846.9-2004 General technical specifications for high voltage test equipments Part 9: vacuum interrupter detector

HU-MSZT, True Density Meter

European Committee for Standardization (CEN), True Density Meter

  • EN 772-4:1998 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
  • EN 993-2:1995 Methods of test for dense shaped refractory products - Part 2: Determination of true density
  • EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • EN 542:2003 Adhesives - Determination of density
  • EN 323:1993 Wood-based panels; determination of density
  • EN 542:1994 Adhesives - Determination of Density
  • prEN 542-1991 Adhesives; determination of density
  • prEN 323-1992 Wood-based panels; determination of density
  • EN ISO 8130-2:2021 Coating powders - Part 2: Determination of density by gas comparison pycnometer (referee method) (ISO 8130-2:2021)
  • EN ISO 8130-2:2010 Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., True Density Meter

  • ASHRAE 3763-1994 Predicting the Temperature@ Humidity@ Pressure@ and/or Density Effects on Velocity Instrumentation

Xinjiang Provincial Standard of the People's Republic of China, True Density Meter

Japanese Industrial Standards Committee (JISC), True Density Meter

Professional Standard - Machinery, True Density Meter

  • JB/T 6220-2011 Non-destructive testing instruments.The densimeter for radiography

Professional Standard - Military and Civilian Products, True Density Meter

  • WJ/T 9056.1-2006 Methods for Determination of Density of Industrial Explosives Part 1: Determination of Density of Coils
  • WJ/T 9056.2-2006 Methods for Determination of Density of Industrial Explosives Part 2: Determination of Density of Explosives

BE-NBN, True Density Meter

Professional Standard - Agriculture, True Density Meter

国家质量监督检验检疫总局, True Density Meter

  • SN/T 2383-2017 Liquid chemical products.Determination of density and relative density.Digital density meter method

GM Holden Ltd, True Density Meter

NZ-SNZ, True Density Meter

  • NZS 4402.5.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.2: Balloon Densometer Method for the Determination of the In Situ Density

FI-SFS, True Density Meter

IT-UNI, True Density Meter

Professional Standard - Aviation, True Density Meter

  • HB 5367.7-1986 Method for Determination of Density of Carbon Graphite Sealing Materials

(U.S.) Ford Automotive Standards, True Density Meter

  true density test, True Density Test Standard, True Density Detection, True Density Meter, true density instrument, True Density Meter, true density experiment, true density test, true density measurement, True Density Determination Method, National standard of true density, Carbon Black True Density, True Density Principle, Solid True Density, true density false density, true density iso, True Density + False Density, true density iso, What is the true density of bulk density?, particle true density.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved