ZH
RU
ES

shaft tolerance

shaft tolerance, Total:164 items.

In the international standard classification, shaft tolerance involves: Bearings, Linear and angular measurements, Vocabularies, Materials and components for railway engineering, Horology, Paper and board, Rotating machinery.

BR-ABNT, shaft tolerance

• ABNT PB-278-1979

SE-SIS, shaft tolerance

• SIS SMS 2434-1964 Toleranre.i for gauges. Shafts ISO cd7 -cdlO
• SIS SMS 2432-1964 Toleranc.es for gauges. Shafts ISO b9 - bl3
• SIS SMS 2449-1964 Tolerances for gauges. Shafts ISO s5 - s7
• SIS SMS 2444-1964 Toleronres for gauges. Shaftx ISO k5-k16
• SIS SMS 2435-1964 Tolerances for gauges. Shafts ISO dl - d11
• SIS SMS 2440-1964 Toleranres for gauges. Shafts ISO g5 - g8
• SIS SMS 2436-1964 Tolerances for gauges. Shafts ISO e6-el0
• SIS SMS 2448-1964 Tolerances for gauges. Skafts ISO r5 - r7
• SIS SMS 2437-1964 Tolerancex for gauges. shafs ISO ef'5 - ef9
• SIS SMS 2458-1964 Tolerances for gauges. Shafls ISO zcT - zc9
• SIS SMS 2456-1964 Tolerances for gauges. Shnflx ISO za6 - za8
• SIS SMS 2455-1964 Tolerances for gauges. Shafts ISO z6 - z8
• SIS SMS 2433-1964 Tolerances for gauges. Shafts ISO cS-cl2
• SIS SMS 2438-1964 Tolerances for gauges. Shafts ISO f5-f9
• SIS SMS 2442-1964 Tolerances for gauge.s. Shafls ISO j5 -j7
• SIS SMS 2452-1964 Tolerances for gauges. Shafts ISO v5 - v8
• SIS SMS 2446-1964 Tolerances for gauges. Shafts ISO n.5 - n.7
• SIS SMS 2451-1964 Tolerances for gauges. Skafts ISO u5 - u8
• SIS SMS 2441-1964 Tolerances for gauges. Shafts ISO h5 - h16
• SIS SMS 2443-1964 Tolerances for gauges. Skafts ISO js.5 -js16
• SIS SMS 2454-1964 Tolerances for gauges. Shafts ISO y6 - y8
• SIS SMS 2447-1964 Tolerances for gauges. Shafts ISO 5p -p7
• SIS SMS 2457-1964 Tolerances for gauges. Shafts ISO zb7-zb9
• SIS SMS 2450-1964 Tolerances for gauges. Shafts ISO t5 - t7
• SIS SMS 2414-1964 Tolerances for gauges. Holes ISO K5 - K8
• SIS SMS 2453-1964 Tolerances for gauges. Shafts ISO x5 - x8
• SIS SMS 2445-1964 Tolerances for gauges. Shafts ISO m5 - m7
• SIS SMS 2431-1964 Tolerances for gauges. Shafts ISO alO - al3
• SIS SMS 677-1971 Selection of hole- and shaft tolerances for general purposes
• SIS SMS 2439-1964 To/erances for gauges. Shaft.s ISO fg5 - fg7
• SIS SS 2144-1990 ISO system of limits and fits — ISO tolerances k3 to k13 for shafts
• SIS SS 2151-1990 ISO system of limits and fits — ISO tolerances u5 to u9 for shafts
• SIS SS 2138-1990 ISO system of limits and fits — ISO tolerances f3 to f10 for shafts
• SIS SS 2155-1990 ISO system of limits and fits — (SO tolerances z6toz11 for shafts
• SIS SS 2157-1990 ISO system of limits and fits — ISO tolerances zb7tozbll for shafts
• SIS SS 2131-1990 ISO system of limits and fits — ISO tolerances a9toa13 for shafts
• SIS SS 2148-1990 ISO system of limits and fits — ISO tolerances r3 to Rio for shafts
• SIS SS 2158-1990 ISO system of limits and fits — ISO tolerances zc7 tozc11 for shafts
• SIS SS 2154-1990 ISO system of limits and fits — ISO tolerances y6toy10 for shafts
• SIS SS 2146-1990 ISO system of limits and fits — ISO tolerances n3 to n9 for shafts
• SIS SS 2156-1990 ISO system of limits and fits — ISO tolerances za6 tozall for shafts
• SIS SS 2140-1990 ISO system of limits and fits — ISO tolerances g3tog10 for shafts
• SIS SS 2150-1990 ISO system of limits and fits — ISO tolerances t5 to t8 for shafts
• SIS SS 2145-1990 ISO system of limits and fits — ISO tolerances m3 to m9 for shafts
• SIS SS 2152-1990 ISO system of limits and fits — ISO tolerances v5tov8 for shafts
• SIS SS 2134-1990 ISO system of limits and fits — ISO tolerances cd5 to cd10 for shafts
• SIS SS 2139-1990 ISO system of limits and fits — ISO tolerances fg3 tofglO for shafts
• SIS SS 2141-1990 ISO system of limits and fits — ISO tolerances hi tohlS for shafts
• SIS SS 2137-1990 ISO system of limits and fits — ISO tolerances ef3 to ef10 for shafts
• SIS SS 2153-1990 ISO system of limits and fits — ISO tolerances x5toxW for shafts
• SIS SS 2142-1990 ISO system of limits and fits — ISO tolerances/5 to/8 for shafts
• SIS SS 2136-1990 ISO system of limits and fits — ISO tolerances e5 to e 10 for shafts
• SIS SS 2133-1990 ISO system of limits and fits — ISO tolerances c8 to c12 for shafts
• SIS SS 2149-1990 ISO system of limits and fits — /SO tolerances s3 tos10 for shafts
• SIS SS 677-1990 ISO system of limits and fits — Selection of hole- and shaft tolerances for general purposes
• SIS SS 506-1990 ISO system of limits and fits — Tolerance grades for shafts — Graphical review
• SIS SMS 2625-1970 Rolling bearings. Thrust benrings with flat seats. Tolerantes
• SIS SMS 2142-1964 ISO-tolerances. Shafts. J5-J7

German Institute for Standardization, shaft tolerance

• DIN 620-2:1988 Rolling bearings; tolerances for rolling bearings; tolerances for radial bearings
• DIN 620-2:1988-02 Rolling bearings; tolerances for rolling bearings; tolerances for radial bearings / Note: To be replaced by DIN 620-2 (1999-10).
• DIN 3964:1980 Deviations of Shaft Centre Distances and Shaft Position Tolerances of Casings for Cylindrical Gears
• DIN 3964:1980-11 Deviations of Shaft Centre Distances and Shaft Position Tolerances of Casings for Cylindrical Gears
• DIN ISO 1132-1:2001 Rolling bearings - Tolerances - Part 1: Terms and definitions (ISO 1132-1:2000)
• DIN ISO 1132-1:2001-09 Rolling bearings - Tolerances - Part 1: Terms and definitions (ISO 1132-1:2000)
• DIN 620-3:1982 Rolling bearings; tolerances for thrust bearings
• DIN 620-3:1982-06 Rolling bearings; tolerances for thrust bearings

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, shaft tolerance

• GB/T 307.4-2012 Rolling bearing tolerances - Part 4: Thrust bearing tolerances
• GB/T 1803-2003 Limits and fits Tolerance zones for holes and shafts size up to 18mm
• GB 304.10-1989 Spherical plain bearings-Tolerances
• GB 307.1-1984 Rolling bearings--Tolerances
• GB/T 304.10-1989 Spherical plain bearings--Tolerances
• GB/T 4199-2003 Rolling bearings--Tolerances--Definitions
• GB/T 307.1-1994 Rolling bearings--Radial bearings--Tolerances
• GB/T 307.4-2002 Rolling bearings--Thrust bearings--Tolerances
• GB/T 307.1-2005 Rolling bearings-Radial bearings-Tolerances
• GB 307.1-2017 Rolling bearing radial bearing tolerances
• GB/T 6445.2-1996 Rolling bearings--Needle roller bearings--Track rollers--Tolerances

FI-SFS, shaft tolerance

• SFS 3262-1975
• SFS 3261-1975
• SFS 2872-1973

Professional Standard - Agriculture, shaft tolerance

• GB/T 1803-1979 Tolerance and fit dimensions up to 18 mm hole, shaft tolerance zone
• GB/T 1801-1979 Tolerance and fit dimension to 500mm hole, shaft tolerance zone and fit
• GB/T 1802-1979 Tolerance and matching dimensions greater than 500 to 3150 mm common hole and shaft tolerance zone

CH-SNV, shaft tolerance

• SN 418 909-3-1983 Plastics — Material testing — Coefficient of linear expansion
• SNV 87380-1935

Association Francaise de Normalisation, shaft tolerance

• NF E22-337:1983 ROLLING BEARINGS. TOLERANCES. DEFINITIONS.
• NF E22-335:2002 Rolling bearings - Radial bearings - Tolerances.
• NF E22-321:2006 Rolling bearings - Thrust bearings - Tolerances.
• NF E22-335:1996 Rolling bearings. Radial bearings. Tolerances.
• NF E22-321:1998 Rolling bearings. Thrust bearings. Tolerances.
• NF E22-360-2:1988 SPHERICAL PLAIN RADIAL BEARINGS,JOINT TYPE. TOLERANCES.
• NF F01-121:1989 Rolling stock. Axles for roller-bearing axle-boxes. Tolerances. Surface conditions. Special dimensional indications.
• NF ISO 1132-1:2000 Roulements - Tolérances - Partie 1 : termes et définitions
• NF E22-384:1983 ROLLING BEARINGS. NEEDLE ROLLERS. TOLERANCES.
• NF E22-337-1*NF ISO 1132-1:2000 Rolling bearings - Tolerances - Part 1 : terms and definitions

RO-ASRO, shaft tolerance

• STAS 7016/2-1987 NEEDLE ROLLER BEARINGS Tolerances
• STAS SR ISO 1132:1995 Roling bearings-Tolerances-Definitions
• STAS 12314-1985 ROLLING BEARINGS Tolerances. Definitions
• STAS SR ISO 6125:1982 Spherical plain radial bearings; joint fype. Tolerances
• STAS ISO 6133:1992 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
• SR ISO 199:1993 Rolling bearings. Thrust ball bearings, Tolerances

International Organization for Standardization (ISO), shaft tolerance

• ISO 492:1981 Radial bearings — Tolerances
• ISO 1132:1980 Rolling bearings — Tolerances — Definitions
• ISO 199:2005 Rolling bearings - Thrust bearings - Tolerances
• ISO 492:2002 Rolling bearings - Radial bearings - Tolerances
• ISO 492:1986 Rolling bearings; Radial bearings; Tolerances
• ISO 492:1994 Rolling bearings - Radial bearings - Tolerances
• ISO 199:1979 Rolling bearings; Thrust ball bearings; Tolerances
• ISO/DIS 12129-1 Plain bearings — Tolerances — Part 1: Fits
• ISO 12129-1:2019 Plain bearings — Tolerances — Part 1: Fits
• ISO 6125:1982 Spherical plain radial bearings; joint type; Tolerances

Japanese Industrial Standards Committee (JISC), shaft tolerance

• JIS B 1514:2000 Rolling bearings -- Tolerances
• JIS B 1514-1:2006 Rolling bearings -- Tolerances of bearings -- Part 1: Radial bearings
• JIS B 1514-2:2006 Rolling bearings -- Tolerances of bearings -- Part 2: Thrust bearings
• JIS B 1515-1:2006 Rolling bearings -- Tolerances -- Part 1: Terms and definitions

Taiwan Provincial Standard of the People's Republic of China, shaft tolerance

• CNS 9572-1985 Tolerances of Rolling Bearings-Radial Bearings
• CNS 9573-1985 Tolerances of Rolling Bearings-Thrust Ball Bearings
• CNS 9574-1985 Tolerance of Ball and Roller Bearings (Foundation of Theory)
• CNS 11259-1985 Tolerances of Ball and Roller Bearings-Chamfer Dimension Limits

TR-TSE, shaft tolerance

• TS 966-1971 ROLLING BEARINGS TOLERANCES DEPINITIONS

AENOR, shaft tolerance

• UNE 18106:1985 ROLLING BEARINGS. TOLERANCES. DEFINITIONS.
• UNE 18031:1991 ROLLING BEARINGS. RADIAL BEARINGS. TOLERANCES.

British Standards Institution (BSI), shaft tolerance

• BS ISO 12129-1:2019 Plain bearings. Tolerances. Fits
• BS ISO 199:1997 Rolling bearings - Thrust bearings - Tolerances
• BS ISO 199:1998 Rolling bearings - Thrust bearings - Tolerances
• BS ISO 492:2002 Rolling bearings - Radial bearings - Tolerances
• BS ISO 199:2005 Rolling bearings - Thrust bearings - Tolerances
• BS ISO 1132-1:2000 Rolling bearings - Tolerances - Terms and definitions
• BS ISO 12129-2:2019 Tracked Changes. Plain bearings. Tolerances. Tolerances on form and position and surface roughness for shafts and thrust collars
• BS ISO 1132-2:2002 Rolling bearings. Tolerances. Measuring and gauging principles and methods
• BS ISO 1132-2:2001 Rolling bearings. Tolerances - Measuring and gauging principles and methods
• 23/30472145 DC BS ISO 12129-1. Plain bearings. Tolerances - Part 1. Fits

ES-UNE, shaft tolerance

• UNE 18106:1986 ERRATUM ROLLING BEARINGS. TOLERANCES. DEFINITIONS.

Professional Standard - Machinery, shaft tolerance

• JB/ZQ 4006-2006 Limit and fit - Tolerance and fit for hole and shaft of 3,150 to 10,000 mm in size
• JB/T 8995.3-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines.Common used tolerance strips for size of holes and shafts above 3150mm to 16000mm
• JB/T 8995.2-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines.Tolerance stripsand fits for size of holes and shafts above 500mm to 3150mm
• JB/T 7750-1995 Rolling bearings Thrust spherical roller bearings Tolerances
• JB/T 7751-1995 Rolling bearings Thrust tapered roller bearings Tolerances
• JB/T 5305-2006 Rolling bearings.Thrust ball bearings with sphered housing washer.Tolerances

AT-ON, shaft tolerance

• ONORM M 6321-4-1998 Rolling bearings - Tolerances: internal clearance
• ONORM M 6321 Teil.2-1985 Rolling bearings; tolerances: gauging practices
• ONORM M 6321 Teil.1-1985 Rolling bearings; tolerances: definitions Roulements; tol?rances: d?finitions
• ONORM M 6321 Teil.3-1985 Rolling bearings; tolerances: boundary dimensions and running accuracy

IN-BIS, shaft tolerance

• IS 11027-1984
• IS 5692-1988
• IS 7460-1988

Professional Standard - Light Industry, shaft tolerance

• QB/T 2266-1996 Tolerances and fits for timing instruments with dimensions less than 1 mm Hole and shaft tolerance zone and fit
• QB/T 2266-2012 Tolerance zones and fits for holes and shafts size up to 1mm for timekeeping instruments

YU-JUS, shaft tolerance

• JUS M.C3.751-1991 Rolling bearings.Radial bearings. Tolerances

ABMA - American Bearing Manufacturers Association, shaft tolerance

• 199-2005 Roller Bearings - Thrust Bearings - Tolerances

American National Standards Institute （ANSI), shaft tolerance

• ANSI/ABMA/ISO 199:2005 Rolling bearings - Thrust bearings - Tolerances

CZ-CSN, shaft tolerance

• CSN 02 4602-1981 Rolling bearings. Tolerances. Terminology and definitions.
• CSN 02 3510-1992 Spherical plain bearings, joint type - Tolerances

RU-GOST R, shaft tolerance

• GOST 25256-1982 Rolling bearings. Tolerances. Terms and definitions
• GOST 25256-2013 Rolling bearings. Tolerances. Terms and definitions
• GOST R 55944-2014 Bearings of the modified wood. Tolerances and landing

American Bearing Manufacturers Association, shaft tolerance

• ABMA 199-1997 Roller Bearings - Thrust Bearings - Tolerances ISO 199; 1997

Korean Agency for Technology and Standards (KATS), shaft tolerance

• KS B ISO 12129-1:2022 Plain bearings — Tolerances — Part 1: Fits

KR-KS, shaft tolerance

• KS B ISO 12129-1-2022 Plain bearings — Tolerances — Part 1: Fits

国家市场监督管理总局、中国国家标准化管理委员会, shaft tolerance

• GB/T 39741.1-2021 Plain bearings—Tolerances—Part 1：Fits
• GB/T 39741.2-2021 Plain bearings—Tolerances—Part 2：Tolerances on geometrical characteristics and surface roughness for shafts and thrust collars

VN-TCVN, shaft tolerance

• TCVN 4175-1-2008 Rolling bearings.Tolerances.Part 1: Terms and definitions

PH-BPS, shaft tolerance

• PNS ISO 1132-1:2021 Rolling bearings - Tolerances - Part 1: Terms and definitions

Others:   Fitting tolerances of bearings and shafts, shaft tolerance, Collar Tolerance, shaft tolerance, Drilling Tolerance, Annealing tolerance, Cyclic Tolerance, iso tolerance, Check shaft tolerances, crystal axis, crystal axis crystal axis, axis and crystal axis, iso axis standard tolerance, spectral axis, Shaft geometric tolerance, shaft tolerance, Shaft Tolerance Table, Shaft Tolerance Requirements, Shaft Dimensional Tolerance, Shaft geometric tolerance.