ZH
RU
ES

instantaneous photocurrent

instantaneous photocurrent, Total:463 items.

In the international standard classification, instantaneous photocurrent involves: Semiconductor devices, Electrical accessories, Ventilators. Fans. Air-conditioners, Optoelectronics. Laser equipment, Nuclear energy engineering, Transformers. Reactors, Technical drawings, Electromagnetic compatibility (EMC), Adhesives, Road vehicle systems, Electricity. Magnetism. Electrical and magnetic measurements, Integrated circuits. Microelectronics, Power transmission and distribution networks, Solar energy engineering, Lamps and related equipment, Power stations in general, Hydraulic construction, Electronic components in general, Analytical chemistry, Testing of metals, Shipbuilding and marine structures in general, Lighting, Rectifiers. Convertors. Stabilized power supply, Paints and varnishes, Industrial automation systems, Railway rolling stock, Electric road vehicles, Rotating machinery, Fibre optic communications, Galvanic cells and batteries, Industrial furnaces, Electronic tubes, Aircraft and space vehicles in general, Telecommunication systems, Installations in buildings, Protection against electric shock, Metrology and measurement in general, Electrical wires and cables, Switchgear and controlgear, Medical equipment, Fuels, Electrical engineering in general, Aerospace electric equipment and systems, On-board equipment and instruments, Resistors, Burners. Boilers, Interface and interconnection equipment.


Defense Logistics Agency, instantaneous photocurrent

Institute of Electrical and Electronics Engineers (IEEE), instantaneous photocurrent

  • IEEE Std C37.011-2011 Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • IEEE Std C37.011-2005 IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • IEEE 1627-2019 IEEE Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE P1627/D7, March 2019 IEEE Approved Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE Std C37.06.1-2000 Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated “Definite Purpose for Fast Transient Recovery Voltage Rise Times”
  • IEEE P1627/D4, April 2018 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE P1627/D5, October 2018 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE P1627/D2, November 2017 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • ANSI/IEEE Std 37.011-1979 IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE Std C37.011-1979 IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE PC37.011/D7, July 2010 IEEE Draft Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • IEEE PC37.011/D10, August 2011 IEEE Draft Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • IEEE Std 328-1971*ANSI C37.0721-1971 IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers rated on a symetical current basis.
  • IEEE Std C37.011-1994 IEEE Application guide for transient recovery voltage for AC High-Voltage circuit breakers rated on a symmetrical current basis
  • IEEE P1627/D6, February 2019 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE PC37.06.1/D6, October 2017 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • IEEE PC37.06.1/D5, April 2017 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • IEEE PC37.06.1/D3, July 2016 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • IEEE Std C37.011-2019 IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers with Rated Maximum Voltage above 1000 V
  • ANSI C37.06.1-2000 American National Standard Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated -Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • IEEE Std C37.06.1-2017 IEEE Recommended Practice for Preferred Ratings for High-Voltage(>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • IEEE PC37.011/D6, November 2017 IEEE Draft Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers with Rated Maximum Voltage above 1000 V
  • IEEE 1627 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of Surge Arrestors
  • IEEE PC37.06.1/D7, October 2017 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • P1627/D1, June 2017 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of Surge Arrestors
  • IEEE PC37.011/D9, September 2018 IEEE Approved Draft Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers with Rated Maximum Voltage above 1000V
  • IEEE Std 1601-2010 IEEE Trial-Use Standard for Optical AC Current and Voltage Sensing Systems
  • IEEE Unapproved Draft Std P1601/D12, Nov 2009 Draft Trial-Use Standard for Optical A.C. Current and Voltage Sensing Systems
  • IEEE 1601-2010 Trial-Use Standard for Optical AC Current and Voltage Sensing Systems
  • IEEE Std C37.09b-2010 Test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis - Amendment 2: To change the description of transient recovery voltage for harmonization with IEC 62271-100
  • IEEE Unapproved Draft Std P1601_D10, Mar 2008.pdf IEEE Draft Trial-Use Standard for Optical A.C. Current and Voltage Sensing Systems
  • IEEE Std C57.12.59/COR-2006 Errata to IEEE Guide for Dry-Type Transformer Through-Fault Current Duration
  • ANSI/IEEE Std C57.109-1985 IEEE Guide for Transformer Through-Fault-Current Duration
  • IEEE Std C57.109-1985 IEEE Guide for Transformer Through-Fault-Current Duration
  • IEEE Std PC37.011/D13 Unapproved IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers (Revision of C37.011-1979) Superseded by Pc37.011_D14
  • IEEE Std PC37.011/D14 Approved IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers (Revision of C37.011-1979) Superseded by C37.011-2005
  • IEEE Std C37.04b-2008 Rating structure for ac high-voltage circuit breakers rated on a symmetrical current basis - Amendment 2: To change the description of transient recovery voltage for harmonization with IEC 62271-100
  • IEEE Std C62.2-1987(R1994) IEEE Guide for the Application of Gapped Silicon-Carbide Surge Arresters for Alternating Current Systems
  • IEEE Unapproved Draft Std PC37.09b/D4, Sept 2009 IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
  • IEEE Unapproved Draft Std PC37.04b/D14, Apr 2008 IEEE Draft &Ldquo;IEEE Standard for Rating Structure for Ac High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis&Rdquo; - Amendment to Change the Description of Transient Recovery Voltage for Harmonization With IEC 62271-100
  • IEEE Std C57.12.59-1989 Guide for dry-type transformer through-fault current duration
  • IEEE Std C57.12.59-2001 IEEE Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE Std C57.12.59-2015 Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE Std C57.109-2018 IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration

HU-MSZT, instantaneous photocurrent

American National Standards Institute （ANSI), instantaneous photocurrent

  • ANSI/EIA 364-43C:2013 Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
  • ANSI/IEEE C37.011:2011 Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • ANSI/IEEE C37.09b:2010 Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis -Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
  • ANSI/IEEE C37.04b:2009 IEEE Standard for Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment to Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
  • ANSI/IEEE C57.12.59:2002 Guide for Dry-Type Transformer Through-Fault Current Duration

TR-TSE, instantaneous photocurrent

  • TS 2577-1977 L?QUID FLOW MEASUREMENT ?N OPEN CHANNELS-DILUTION METHODS FOR MEASUREMENT OF STEADY H.OW-PAR'i" II: INTEGRATION (SUDDEN INJECTION) METHOD

Association Francaise de Normalisation, instantaneous photocurrent

  • NF S10-121:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics.
  • NF C91-004-29*NF EN 61000-4-29:2001 Electromagnetic compatibilty (EMC) - Part 4-29 : testing and measurement techniques - Voltages dips, short interruptions and voltage variations on d.c. in put power port immunity tests
  • NF C42-544-6:2001 Instrument transformers - Part 6 : requirements for protective current transformers for transient performance.
  • NF EN ISO 13129:2013 Peintures et vernis - Mesurage électrochimique de la protection apportée à l'acier par des revêtements de peinture - Technique du courant interrompu (CI), voltamétrie de relaxation (VR) et mesurages de courants continus transitoires (CCT)
  • NF EN 62374-1:2011 Dispositifs à semiconducteurs - Partie 1 : essai de rupture diélectrique en fonction du temps (TDDB) pour les couches intermétalliques
  • NF EN IEC 61083-3:2021 Appareils et logiciels utilisés pour les mesurages pendant les essais à haute tension et à courant élevé - Partie 3 : exigences relatives au matériel pendant les essais avec des tensions et des courants alternatifs et continus
  • NF C57-321:1994 Photovaltaic devices. Part 1 : measurement of photovaltic current-voltage characteristics.
  • NF C71-239:1992 A.C. supplied electronic ballast for tubular fluorescent lamps. performance requirements.
  • NF C46-023:1988 ELECTROMAGNETIC COMPATIBILITY MAINLY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT. ELECTRICAL FAST TRANSIENTS BURST REQUIREMENTS.
  • NF C57-341*NF EN 50530:2010 Overall efficiency of grid connected photovoltaic inverters
  • NF C71-235:1992 D.C. supplied electronic ballast for tubular fluorescent lamps. Performance requirements.
  • NF C57-321*NF EN IEC 60904-1:2020 Photovoltaic devices - Part 1 : measurement of photovoltaic current-voltage characteristics
  • NF C57-321*NF EN 60904-1:2007 Photovoltaic devices - Part 1 : measurement of photovoltaic current-voltage characteristics
  • NF C91-004-11:1995 Electromagnetic compatibility (emc). Part 4 : testing and measurement techniques. Section 11 : voltage dips, short interruptions and voltage variations immunity tests.
  • NF EN 186220:1995 Spécification intermédiaire - Jeux de connecteurs pour fibres et câbles optiques type LSC.
  • NF EN IEC 60794-3:2022 Câbles à fibres optiques - Partie 3 : câbles extérieurs - Spécification intermédiaire
  • NF EN 60794-2:2017 Câbles à fibres optiques - Partie 2 : câbles intérieurs - Spécification intermédiaire
  • NF EN 60909-3:2010 Courants de court-circuit dans les réseaux triphasés à courant alternatif - Partie 3 : courants durant deux court-circuits monophasés simultanés séparés à la terre et courants de court-circuit partiels s'écoulant à travers la terre
  • NF EN IEC 60904-1:2020 Dispositifs photovoltaïques - Partie 1 : mesurage des caractéristiques courant-tension des dispositifs photovoltaïques
  • NF EN IEC 61225:2020 Centrales nucléaire de puissance - Systèmes d'instrumentation, de contrôle-commande et d'alimentation électrique - Exigences pour les systèmes d'alimentation en courant alternatif et en courant continu statiques sans interruption
  • NF C57-108*NF EN 61829:2016 Photovoltaic (PV) array - On-site measurement of current-voltage characteristics
  • NF C53-228:1989 Semiconductor convertors. Switches for uninterruptible power systems (vps switches).
  • NF F62-311:2003 Railway applications - Rolling stock D.C. supplied electronic ballasts for lighting fluorescent lamps.
  • NF C71-234:1992 D.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements.
  • NF EN IEC 63027:2023 Systèmes photovoltaïques - Détection et interruption d'arc en courant continu
  • NF EN IEC 60794-4:2018 Câbles à fibres optiques Partie 4 : spécification intermédiaire - Câbles optiques aériens le long des lignes électriques de transport d'énergie
  • NF EN 61829:2016 Champ de modules photovoltaïques (PV) - Mesurage sur site des caractéristiques courant-tension
  • NF C71-238/A1:2001 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements.
  • NF C71-305*NF EN 62384:2006 D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements.
  • NF C71-238:1996 Auxiliaries for lamps. A.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements.
  • NF F62-311*NF EN 62718:2017 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
  • NF C71-239/A1*NF EN 60929/A1:2016 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., instantaneous photocurrent

  • IEEE 328-1971 Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.011-1994 Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE P1627/D7-2019 Draft Standard for Transient Overvoltage Protection of DC Electrification System by Application DC Surge Arresters
  • IEEE C37.011-2005 Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • IEEE P1627/D2-2017 Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE P1627/D4-2018 Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE P1627/D5-2018 Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE C37.011-1979 APPLICATION GUIDE FOR TRANSIENT RECOVERY VOLTAGE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS (R 1989)
  • IEEE C37.06.1-2000 Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated “Definite Purpose for Fast Transient Recovery Voltage Rise Times”
  • IEEE P1627/D1-2017 Draft Standard for Transient Overvoltage Protection of DC Electrification System by Application of Lightning Arresters
  • IEEE P1627/D6-2019 Draft Standard for Transient Overvoltage Protection of DC Electrification System by Application of Surge Arresters
  • IEEE C37.06.1-2017 Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • IEEE C57.109-1985 GUIDE FOR TRANSFORMER THROUGH-FAULT-CURRENT DURATION
  • IEEE C37.36B-1990 Guide to Current Interruption with Horn-Gap Air Switches
  • IEEE C62.1-1989 Standard for Gapped Silicon-Carbide Surge Arresters for AC Power Circuits
  • IEEE C37.04B-2008 Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
  • IEEE C57.109-1993 Guide for Liquid-Immersed Transformer Through-Fault-Current Duration
  • IEEE C37.09B-2010 Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
  • IEEE C57.12.59 ERTA-2006 Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE C57.12.59-1989 Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE C57.12.59-2001 Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE C57.12.59-2015 Guide for Dry-Type Transformer Through-Fault Current Duration

CZ-CSN, instantaneous photocurrent

  • CSN 33 3030-1986 Determination of transient recovery voltage forms in networks of alternating voltages.
  • CSN 34 1610-1963 Heavy-current distribution system in industrial workshops
  • CSN 35 8761-1973 Semiconductor devices. Phototransistors photodíodes. Measurement of photoelectric current
  • CSN 35 8762-1973 Semiconductor devices. Phototransistors photodiodes. Measurement of dark current
  • CSN EN 60929-1994 A.C.supplied electronic ballasts for tubular fluorescent lamps.Performance requirements

Professional Standard - Energy, instantaneous photocurrent

国家能源局, instantaneous photocurrent

  • NB/T 20403-2017 Transient analysis of pressure and temperature in compartments of pressurized water reactor nuclear power plants
  • NB/T 10693-2021 Modular AC uninterruptible power supply system
  • NB/T 10685-2021 Technical specifications for combiner boxes for photovoltaic power generation
  • NB/T 32045-2018 Design specifications for DC power generation systems of photovoltaic power stations

ETSI - European Telecommunications Standards Institute, instantaneous photocurrent

  • ETR 283-1996 Equipment Engineering (EE); Transient Voltages at Interface A on Telecommunications Direct Current (DC) Power Distributions
  • ETR 283 CORR.-1997 Equipment Engineering (EE); Transient Voltages at Interface A on Telecommunications Direct Current (DC) Power Distributions
  • TR 100 283-2007 "Environmental Engineering (EE); Transient voltages at Interface ""A"" on telecommunications direct current (dc) power distributions (V2.2.1)"
  • TR 100 283-2002 "Environmental Engineering (EE); Transient Voltages at Interface ""A"" on Telecommunications Direct Current (dc) Power Distributions (V2.1.1)"

YU-JUS, instantaneous photocurrent

  • JUS N.K3.113-1980 High voltage alternating-current circuit-breakers. The envelope of the prospective transient recovery voltage of circuit.
  • JUS N.N6.363-1978 Radio Communications. Transmitters. Measurements particular to transmitters and transposers for television. Transient response

ZA-SANS, instantaneous photocurrent

  • SANS 61000-4-29:2005 Electromagnetic compatibility (EMC) Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
  • SANS 60929:2006 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • SANS 60044-6:2004 Instrument transformers Part 6: Requirements for protective current transformers for transient performance
  • NRS 064-2005 Guidelines for the exchange of spatial information in the Electricity Supply Industry
  • SANS 60925:2001 DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • SANS 60099-1:1999 Surge arresters Part 1: Non-linear resistor type gapped surge arresters for a.c systems

GB-REG, instantaneous photocurrent

Group Standards of the People's Republic of China, instantaneous photocurrent

  • T/ZZB 3092-2023 Medium viscosity α- Ethyl cyanoacrylate instant adhesive for electronic products
  • T/CEC 446.4-2022 Lithium battery DC power supply system for electric power Part 4: Intermittent charging DC power supply equipment
  • T/QGCML 225-2021 Operation and maintenance specification for DC combiner box of photovoltaic power station
  • T/CES 054-2021 Technical specification for optical fiber current transformers
  • T/CEEIA 390-2019 SPDs with integrated overcurrent protection function based on spark gap
  • T/GSEE 0006-2023 Full Optical Fiber Current Measurenment Device Supervision Guideline
  • T/CEC 518-2021 Pulse electroacoustic (PEA) space charge test method for extruded insulated DC cables
  • T/CSA 048-2019 Measurement of Electrical and Photometric Characteristics for General Lighting LEDs under Different Currents / Temperatures

European Telecommunications Standards Institute (ETSI), instantaneous photocurrent

  • ETSI ETR 283-1996 Equipment Engineering (EE); Transient Voltages at Interface A on Telecommunications Direct Current (DC) Power Distributions
  • ETSI ETR 283 CORR.-1997 Equipment Engineering (EE); Transient Voltages at Interface A on Telecommunications Direct Current (DC) Power Distributions
  • ETSI TR 100 283-2007 Environmental Engineering (EE); Transient voltages at Interface "A" on telecommunications direct current (dc) power distributions (V2.2.1)
  • ETSI TR 100 283-2002 Environmental Engineering (EE); Transient Voltages at Interface"A" on Telecommunications Direct Current (dc) Power Distributions V2.1.1

RO-ASRO, instantaneous photocurrent

  • STAS 7246/7-1974 ASYNCHRONOUS THREEPHASE MOTORS Test methods Overspeed test and momentary excess load test
  • STAS 11232/5-1981 Stabilized power supplies, d.c. outputTEMPERATURE EFFECT, TRANSIENT PERFORMANCE MEASUREMENT, SETTLING EFFECTS Prescription

未注明发布机构, instantaneous photocurrent

  • BS EN 60044-6:1999 Instrument transformers — Part 6 : Requirements for protective current transformers for transient performance
  • DIN EN 62747:2020 Terminology for voltage intermediate circuit converters (VSC) for high-voltage direct current (HVDC) systems
  • BS EN 60909-3:2010(2013) Short - circuit currents in three - phase a . c systems Part 3 : Currents during two separate simultaneous line - to - earth short - circuits and partial short - circuit currents flowing through earth
  • BS IEC 60287-1-3:2002 Electric cables — Calculation of the current rating — Part 1 - 3 : Current rating equations (100 % load factor) and calculation of losses — Current sharing between parallel single - core cables and calculation of circulating current losses

International Organization for Standardization (ISO), instantaneous photocurrent

  • ISO 7637-2:2004 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
  • ISO 7637-2:2011 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
  • ISO 7637-2:2004/Amd 1:2008 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only; Amendment 1
  • ISO 7637-2:1990 Road vehicles; electrical disturbance by conduction and coupling; part 2: commercial vehicles with nominal 24 V supply voltage; electrical transient conduction along supply lines only
  • ISO 7637-3:2007 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
  • ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

CENELEC - European Committee for Electrotechnical Standardization, instantaneous photocurrent

  • EN 60044-6:1999 Instrument Transformers Part 6: Requirements for Protective Current Transformers for Transient Performance
  • EN 60904-1:1993 Photovoltaic Devices Part 1: Measurement of Photovoltaic Current-Voltage Characteristics
  • EN 60929:2006 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • EN 60929:2004 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • EN 60928:1995 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements (Incorporates Amendment A1: 1999)
  • EN 60928:1994 A.C. Supplied Electronic Ballasts for Tubular Fluorescent Lamps - General and Safety Requirements

Danish Standards Foundation, instantaneous photocurrent

  • DS/EN 60044-6:2000 Instrument transformers - Part 6: Requirements for protective current transformers for transient performance
  • DS/EN 60929:1994 A.C supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • DS/EN 60904-1:1994 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • DS/EN 60904-1:2007 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • DS/EN IEC 60904-1:2020 Photovoltaic devices – Part 1: Measurement of photovoltaic current-voltage characteristics
  • DS/EN 60909-3:2010 Short-circuit currents in three-phase a.c systems - Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth
  • DS/EN 60928+A2:1994 A.C supplied electronic ballasts for tubular fluorescent lamps - General and safety requriements
  • DS/EN ISO 13129:2013 Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements
  • DS/EN 60925:1994 D.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • DS/IEC 60287-1-3:2002 Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses
  • DS/EN 50311:2004 Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps
  • DS/IEC 62718:2013 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
  • DS/EN 60929/AC:2012 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • DS/EN 60929:2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements

Korean Agency for Technology and Standards (KATS), instantaneous photocurrent

  • KS C 8100-1992 AC supplied electronic ballasts for fluorescent lamps
  • KS C 8100-2020 AC supplied electronic ballast for fluorescent lamps
  • KS C 8100-1999 AC supplied electronic ballast for fluorescent lamps
  • KS C IEC 60044-6:2003 Instrument transformers－Part 6：Requirements for protective current transformers for transient performance
  • KS C 8100-2014 AC supplied electronic ballast for fluorescent lamps
  • KS C 8013-2002 A.C supplied electronic ballasts for discharge lamps
  • KS C 8100-2007 AC supplied electronic ballasis for fluorescent lamps
  • KS C IEC 60925:2003 D.C. supplied electronic ballasts for tubular fluorescent lamps-Performance requirements
  • KS C IEC 60925:2013 D.C. supplied electronic ballasts for tubular fluorescent lamps－Performance requirements
  • KS C IEC 60904-1:2009 Photovoltaic devices-Part 1:Measurement of photovoltaic current-voltage characteristics
  • KS C IEC 60904-1-2009(2020) Photovoltaic devices－Part 1：Measurement of photovoltaic current-voltage characteristics
  • KS C IEC 60929:2008 A.C supplied electronic ballasts for tubular fluorescent lamps－Performance requirements
  • KS C IEC 60925-2003(2008) D.C. supplied electronic ballasts for tubular fluorescent lamps－Performance requirements
  • KS C IEC 62384:2011 DC or AC supplied electronic control gear for LED modules-Performance requirements

RU-GOST R, instantaneous photocurrent

  • GOST 24613.15-1977 Optoelectronic integrated microcircuits. Method for measuring consumption carrent of switching and its duration of logic signal switches
  • GOST 21316.2-1975 Photocells. Method of dark current measurement
  • GOST 24613.9-1983 Optoelectronic integrated microcircuits and optocouplers. Method for measuring switching times
  • GOST 24613.2-1981 Optoelectronic integrated microcircuits and opto-couples. Method for measuring leatage current
  • GOST R IEC 925-1998 D.c. supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
  • GOST 24613.19-1977 Optoelectronic integrated microcircuits and optocouplers. Method for measuring current transfer ratio
  • GOST R IEC 60904-1-2013 Photovoltaic devices. Part 1. Measurement of photovoltaic current-voltage characteristics
  • GOST 11612.4-1984 Photomultipliers. Measuring method of dark anode current
  • GOST 17457-1972 Glow discharge thyratrons tubes. Basic parameters
  • GOST 11612.6-1983 Photomultipliers. Measuring methods of light equivalent of anode dark current noise
  • GOST R IEC 924-1998 D.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
  • GOST 11612.7-1983 Photomultipliers. Measuring methods of light and spectral equivalent of anode current noise produced by luminous flux
  • GOST IEC 60924-2012 D.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
  • GOST 18720.18-1985 Television camera tubes. Methods of measuring insulation resistance and leakage cuvvent between electrodes
  • GOST R IEC 929-1998 Auxiliaries for lamps. A.c.-Supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
  • GOST 21107.5-1975 Gas discharge devices. Methods of measurement of electrical parameters of glow-discharge thyratrons and gas-filled rectifiers
  • GOST IEC 60928-2012 Auxiliaries for lamps. A.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
  • GOST R IEC 62384-2011 Electronic control gear supplied from the sources of direet or alternative current for light emitted diode modules. Performance requirements

Professional Standard - Electricity, instantaneous photocurrent

  • DL/T 1074-2019 DC and AC integrated uninterruptible power supply for electric power
  • DL/T 1074-2007 Integrated uninterruptible power supply equipment of DC and AC for power system
  • DL/T 1789-2017 Fiber optic current transformer technical specification
  • DL/T 5491-2014 Technical code for the design of AC uninterruptible power system of power engineering
  • DL/T 2305-2021 Guidelines for Altitude Correction of Air Gap Discharge Voltage in HVDC Engineering

ES-AENOR, instantaneous photocurrent

NEMA - National Electrical Manufacturers Association, instantaneous photocurrent

  • NEMA C78.3-1978 DIMENSIONAL AND ELECTRICAL CHARACTERISTICS OF FLUORESCENT LAMPS - INSTANT-START AND COLD-CATHODE TYPES
  • NEMA C37.06.1-1997 "Guide for High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Designated ""Definite Purpose for Fast Transient Recovery Voltage Rise Times"" (This is Now Copyrighted by IEEE; See IEEE C37.06.1-2000)"
  • NEMA C78.5-1991 Electric Lamps - Fluorescent Self-Ballasted Lamps - Performance Guide

Professional Standard - Machinery, instantaneous photocurrent

  • JB/T 9302-1999 d.c.photoelectric amplifier galvanometer
  • JB/T 9478.6-1999 Measuring methods of photocell - Dark current
  • JB/T 9478.10-1999 Measuring methods of photocell - Rise time and fall time
  • JB/T 9617-1999 Test specification of the interture insulation on armature winding for DC machines
  • JB/T 9478.4-1999 Measuring methods of photocell - Illumination-current characteristic
  • JB/T 4311.5-2002 Indirect resistance furnaces-RJ series natural convection pit type resistance furnace
  • JB/T 5264-1991 Indirect Resistance Furnace RF Series Forced Convection Well Resistance Furnace
  • JB/T 9478.10-2013 Photovoltaic Cell Measurement Methods Part 10: Rise Time, Fall Time
  • JB/T 9478.7-1999 Measuring methods of photocell - Dark current temperature characteristic
  • JB/T 9478.6-2013 Photovoltaic Cell Measurement Methods Part 6: Dark Current
  • JB/T 9478.4-2013 Photovoltaic Cell Measurement Methods Part 4: Illuminance-Current Characteristics

British Standards Institution (BSI), instantaneous photocurrent

  • BS EN 60904-1:2006 Photovoltaic devices - Measurement of photovoltaic current-voltage characteristics
  • BS EN IEC 60904-1:2020 Photovoltaic devices. Measurement of photovoltaic current-voltage characteristics
  • BS EN 60255-22-4:2002 Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Electrical fast transient/burst immunity test
  • PD IEC TS 63202-3:2023 Photovoltaic cells. Measurement of current-voltage characteristics of bifacial photovoltaic cells
  • BS EN 150014:1997 Harmonized system of quality assessment for electronic components - Blank detail specification: Thyristor diodes, transient overvoltage suppressors
  • BS EN 150014:1995 Harmonized system of quality assessment for electronic components. Blank detail specification: Thyristor diodes, transient overvoltage suppressors
  • BS ISO 7637-3:2007 Road vehicles - Electrical disturbances from conduction and coupling - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
  • BS EN 61347-2-3:2001+A2:2006 Lamp controlgear. Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
  • BS EN 60929:1992 Specification for a.c. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • BS EN 60904-1-1:2017 Photovoltaic devices - Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices
  • PD IEC TS 60904-1-2:2019 Photovoltaic devices. Measurement of current-voltage characteristics of bifacial photovoltaic (PV) devices
  • BS EN 60929:2006 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • BS EN 60928:1995 Auxiliaries for lamps. a.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
  • BS EN IEC 61225:2020 Nuclear power plants. Instrumentation, control and electrical power systems. Requirements for static uninterruptible DC and AC power supply systems
  • BS EN 61347-2-3:2001 Lamp controlgear. Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
  • BS EN IEC 63027:2023 Photovoltaic power systems. DC arc detection and interruption
  • BS IEC 60287-1-3:2003 Electric cables - Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses
  • BS IEC 60287-1-3:2023 Electric cables. Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses. Current sharing between parallel single-core cables and calculation of circulating current losses
  • 21/30405603 DC BS IEC 63272. Nuclear facilities. Electrical power systems. AC interruptible power supply systems
  • BS EN 60929:2004 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • BS EN 61347-2-12+A1:2006 Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • BS EN 61347-2-12:2006 Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic Ballasts for discharge lamps (excluding fluorescent lamps)
  • BS EN 61347-2-12:2005+A1:2010 Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • 19/30355682 DC BS EN 60904-1. Photovoltaic devices. Part 1. Measurement of photovoltaic current-voltage characteristics
  • BS EN 2591:6315:2001 Elements of electrical and optical connection - Test methods - Optical elements - Fluid resistance
  • BS EN 60929:2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps. Performance requirements
  • BS IEC 60747-5-16:2023 Semiconductor devices - Optoelectronic devices. Light emitting diodes. Test method of the flat-band voltage of GaN-based light emitting diodes based on the photocurrent spectroscopy

Japanese Industrial Standards Committee (JISC), instantaneous photocurrent

  • JIS C 8117:1992 AC supplied electronic ballasts for fluorescent lamps
  • JIS C 8117:2008 AC supplied electronic ballasts for fluorescent lamps
  • JIS C 8947:2023 Spherical photovoltaic cell (SPVC) -- Measurement of photovoltaic current-voltage characteristics
  • JIS C 8120:2008 A.C.-supplied electronic ballasts for fluorescent lamps -- Performance requirements
  • JIS E 4411:2015 Rolling stock -- DC supplied electronic ballasts for lighting fluorescent lamps
  • JIS C 8117 AMD 1:2006 AC supplied electronic ballasts for fluorescent lamps (Amendment 1)
  • JIS C 8904-1:2019 Photovoltaic devices -- Part 1: Measurement of photovoltaic current-voltage characteristics
  • JIS C 8120-2:1999 A.C.-supplied electronic ballasts for fluorescent lamps -- Part 2: Performance requirements
  • JIS Z 4613:1993 Capacitor discharge X-ray apparatus for chest indirect radiography
  • JIS C 8120-1:1999 A.C.-supplied electronic ballasts for fluorescent lamps -- Part 1: General and safety requirements
  • JIS C 8120:2015 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps -- Performance requirements

BE-NBN, instantaneous photocurrent

American Society for Testing and Materials (ASTM), instantaneous photocurrent

  • ASTM D5785-95(2006) Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
  • ASTM E1097-97 Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
  • ASTM E10-08 Standard Test Method for Brinell Hardness of Metallic Materials
  • ASTM E10-15 Standard Test Method for Brinell Hardness of Metallic Materials
  • ASTM E973-91e1 Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
  • ASTM E973-10 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
  • ASTM E973-02 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
  • ASTM E973-05a Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
  • ASTM E973-05 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
  • ASTM E973-15 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
  • ASTM F1506-15 Standard Performance Specification for Flame Resistant and Arc Rated Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards
  • ASTM D5785/D5785M-15 Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)

Professional Standard - Electron, instantaneous photocurrent

  • SJ/Z 9032-1987 guidelines - measuring method of short duration of transient signal on low-voltage power and signal cables
  • SJ 1389-1978 Methods of measurement for diodes leakage current between electrodes of noise-generator diodes
  • SJ 2214.10-1982 Method of measurement for light current of semiconductor photodiodes and phototransistors
  • SJ 455-1973 Methods of measurement for static interelectrode capacitance of high-voltage rectifier tubes
  • SJ 366-1973 Measurement of interelectrode leakage current of reflex klystrons
  • SJ 2215.10-1982 Method of measurement for direct current transfer ratio of semiconductor photocouplers
  • SJ 2354.3-1983 Method of measurement for dark current of PIN and avalanche photodiodes

Professional Standard - Commodity Inspection, instantaneous photocurrent

  • SN/T 1444-2004 Indirect immunofluorescent antibody technique for epidemic hemorrhagic fever of rats

Professional Standard-Ships, instantaneous photocurrent

  • CB 1290-1996 Specifications for Marine DC Uninterruptible Power Supply

工业和信息化部, instantaneous photocurrent

  • YD/T 1095-2018 AC uninterruptible power supply (UPS) for communications
  • YD/T 4151-2022 Small integrated AC and DC uninterruptible power supply
  • YD/T 2165-2017 Modular AC uninterruptible power supply for communications
  • YD/T 4006-2022 10kV AC input DC uninterruptible power supply system for information and communication

TH-TISI, instantaneous photocurrent

  • TIS 1506-1998 A.c.-supplied electronic ballasts for tubular fluorescent lamps
  • TIS 885-2008 A.c. supplied electronic ballasts for fluorescent lamps: safety requirements
  • TIS 191-1988 Standard for capacitors for use in tubular fluorescent and other discharge lamp circuits

Professional Standard - Military and Civilian Products, instantaneous photocurrent

U.S. Military Regulations and Norms, instantaneous photocurrent

JP-JEM, instantaneous photocurrent

US-FCR, instantaneous photocurrent

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, instantaneous photocurrent

  • JEDEC JESD66-1999 Transient Voltage Suppressor Standard for Thyristor Surge Protective Device Rating Verification and Characteristic Testing

European Committee for Standardization (CEN), instantaneous photocurrent

  • prEN 60904-1-1993 Photovoltaic devices; part 1: measurement of photovoltaic current-voltage characteristics (IEC 904-1:1987)
  • EN ISO 13129:2012 Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements
  • EN 60925:1991 D.C. supplied electronic ballasts for tubular fluorescent lamps; performance requirements (IEC 925:1989)

Canadian Standards Association (CSA), instantaneous photocurrent

  • CSA C60044-6-07-CAN/CSA-2007 Transformateurs de mesure ?Partie 6 : Prescriptions concernant les transformateurs de courant pour protection pour la r閜onse en r間ime transitoire premi鑢e 閐ition,
  • CSA TIL B-37-1988 Lighting; Solid State (Electronic) Fluorescent Ballasts; Interim Certification Requirements

Lithuanian Standards Office , instantaneous photocurrent

  • LST EN 60044-6-2001 Instrument transformers. Part 6: Requirements for protective current transformers for transient performance (IEC 60044-6:1992, modified)
  • LST EN ISO 13129:2013 Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements (ISO 13129:2012)
  • LST EN 60904-1-2007 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:2006)
  • LST EN IEC 60904-1:2021 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:2020)
  • LST EN 60909-3-2010 Short-circuit currents in three-phase a.c systems -- Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth (IEC 60909-3:2009)
  • LST EN 50311-2004 Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps

Taiwan Provincial Standard of the People's Republic of China, instantaneous photocurrent

  • CNS 13059.1-1992 Photovoltaic Devices Part 1:Measurement of Photovoltaic Current─Voltage Characteristics
  • CNS 13059-1-1992 Photovoltaic Devices Part 1:Measurement of Photovoltaic Current─Voltage Characteristics
  • CNS 13755-2006 AC supplied electronic ballasts for fluorescent lamp
  • CNS 13755-1998 AC supplied electronic ballasts for fluorescent lamp

United States Navy, instantaneous photocurrent

Professional Standard - Light Industry, instantaneous photocurrent

  • QB/T 2871-2007 AC-supplied electronic ballasts for electrodeless fluorescent lamps
  • QB/T 2878-2007 Auxiliaries for lamps.D.C.or A.C.supplied electronic ballasts for discharge lamps (excluding fluorescent lamps).performance requirements

Society of Automotive Engineers (SAE), instantaneous photocurrent

  • SAE J2836-3-2017 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2836-4-2021 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2836-2018 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2836-2-2011 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2836-6-2021 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2836-5-2021 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2847/2-2015 Communication Between Plug-In Vehicles and Off-Board DC Chargers
  • SAE J2847/2-2011 Communication Between Plug-in Vehicles and Off-Board DC Chargers
  • SAE J2847/2-2012 Communication Between Plug-In Vehicles and Off-Board DC Chargers
  • SAE J2847/2-2023 Communication Between Plug-in Vehicles and Off-Board DC Chargers
  • SAE J2836/2-2011 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2836/2-2023 Use Cases for Communication Between Plug-in Vehicles and Off-Board DC Charger

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, instantaneous photocurrent

  • GB/T 22716-2008 Test specifications of interturn insulation of armature winding for DC electrical machines
  • GB/T 18311.28-2007 Fibre optic interconnecting devices and passive components.Basic test and measurement procedures.Part 3-28:Examinations and measurements.Transient loss
  • GB/T 6495.1-1996 Photovoltaic devices. Part 1: Measurement of photovoltaic current-voltage characteristics
  • GB/T 15144-1994 A.C.supplied electronic ballasts for tubular fluorescent lamps-Performence requirements
  • GB/T 15144-2005 A.C.supplied electronic ballasts for tubular fluorescent lamps Performance requirements
  • GB/T 15144-2009 Performance requirements for AC electronic ballasts for tubular fluorescent lamps
  • GB/T 19656-2005 DC supplied electronic ballasts for tubular fluorescent lamps--Performance requirements
  • GB 3379-1982 Interoffice direct signalling system for telephone automatic switching network
  • GB/T 30113.1-2013 Optical measurement methods on flow field in microgravity fluid physics.Part 1:Shadowgraph and schlieren

国家机械工业局, instantaneous photocurrent

  • JB/T 9697-1999 Specification for interturn insulation test of DC motor armature windings

National Electrical Manufacturers Association（NEMA), instantaneous photocurrent

  • NEMA C82.3-2016 Electric Lamps - Reference Ballasts for Fluorescent Lamps
  • NEMA C136.41-2013 For Roadway and Area Lighting Equipment- Dimming Control Between an External Locking Type Photocontrol and Ballast or Driver
  • NEMA C78.5-2003 Electric Lamps - Specifications for Performance of Self-ballasted Compact Fluorescent Lamps

International Electrotechnical Commission (IEC), instantaneous photocurrent

  • IEC 60929/COR1:1991 A.C.-supplied electronic ballasts for tubular fluorescent lamps; performance requirements
  • IEC 60929:1990 A.C.-supplied electronic ballasts for tubular fluorescent lamps; performance requirements
  • IEC 60925:1989 D.c. supplied electronic ballasts for tubular fluorescent lamps; performance requirements
  • IEC 60929:2003 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • IEC 60904-1:1987 Photovoltaic devices; part 1: measurement of photovoltaic current-voltage characteristics
  • IEC 60904-1:2006 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • IEC 60904-1:2020 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • IEC TS 63202-3:2023 Photovoltaic cells - Part 3: Measurement of current-voltage characteristics of bifacial photovoltaic cells
  • IEC 60929:2006 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • IEC 60925:2001 DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • IEC 60929:2015 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • IEC 60747-5-11:2019 Semiconductor devices - Part 5-11: Optoelectronic devices - Light emitting diodes - Test method of radiative and nonradiative currents of light emitting diodes
  • IEC 60924/AMD1:1993 D.C. supplied electronic ballasts for tubular fluorescent lamps; general and safety requirements; amendment 1
  • IEC 61225:2019 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems
  • IEC 60925/AMD2:2001 DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements; Amendment 2
  • IEC 60929/AMD1:1994 A.C.-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements; Amendment 1
  • IEC 60929/AMD2:1996 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements; Amendment 2
  • IEC 63027:2023 Photovoltaic power systems - DC arc detection and interruption
  • IEC 60924:1990 D.C. supplied electronic ballasts for tubular fluorescent lamps; general and safety requirements
  • IEC 60929:2011/AMD1:2015 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • IEC 60929:2011+AMD1:2015 CSV AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • IEC 61829:2015 Photovoltaic (PV) array - On-site measurement of current-voltage characteristics
  • IEC 63128:2019 Lighting control interface for dimming – Analogue voltage dimming interface for electronic current sourcing controlgear
  • IEC 60928:1999 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements
  • IEC 60928:1995 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements
  • IEC 62384:2006 D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements

TIA - Telecommunications Industry Association, instantaneous photocurrent

  • TIA/EIA-41.2-D-1997 Cellular Radiotelecommunications Intersystem Operations: Intersystem Handoff Information Flows
  • TIA/EIA/IS-41.2-C-1996 Cellular Radiotelecommunications Intersystem Operations: Intersystem Handoff Information Flows

SG-SPRING SG, instantaneous photocurrent

  • SS 24-1970 SPECIFICATION FOR BALLASTS FOR FLUORESCENT LAMPS ON A.C. 50 Hz. SUPPLIES
  • SS 24-1987 SPECIFICATION FOR Ballasts For Fluorescent Lamps On A.C. 50 Hz Supplies

European Committee for Electrotechnical Standardization（CENELEC）, instantaneous photocurrent

  • EN 60929:2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • EN IEC 60904-1:2020 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • EN IEC 61225:2020 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems
  • EN 60904-1:2006 Photovoltaic devices Part 1: Measurement of photovoltaic current-voltage characteristics
  • EN 62718:2016 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps

Indonesia Standards, instantaneous photocurrent

Standard Association of Australia （SAA）, instantaneous photocurrent

  • AS/NZS IEC 60904.1:2023 Photovoltaic devices, Part 1: Measurement of photovoltaic current-voltage characteristics
  • AS/NZS 60929:2005 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • IEC 60909-3:2009 RLV Short-circuit currents in three-phase AC systems — Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth
  • AS/NZS IEC 61829:2020 Photovoltaic (PV) array — On-site measurement of current-voltage characteristics

ES-UNE, instantaneous photocurrent

  • UNE-EN IEC 60904-1:2021 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • UNE-EN IEC 61225:2020 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems (Endorsed by Asociación Española de Normalización in May of 2020.)
  • EN IEC 63027:2023 Photovoltaic power systems - DC arc detection and interruption
  • UNE-EN 61829:2016 Photovoltaic (PV) array - On-site measurement of current-voltage characteristics
  • UNE-EN 60929:2011 ERRATUM:2012 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • UNE-EN 62718:2016 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps

机械电子工业部, instantaneous photocurrent

  • JB 4311.5-1991 Indirect resistance furnace RJ series natural convection well type resistance furnace

VN-TCVN, instantaneous photocurrent

  • TCVN 7674-2007 AC-supplied electronic ballasts for tubular fluorescent lamps.Performance requirements
  • TCVN 7674-2014 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements

Professional Standard - Railway, instantaneous photocurrent

  • TB/T 2219-2005 DC supplied electronic ballasts for railway passenger car
  • TB/T 1691-1995 Direct Current Signal Mode Between Railway Telephone Switching Networks

GOSTR, instantaneous photocurrent

  • GOST R 58649-2019 Photovoltaic array. On-site measurement of current-voltage characteristics

SE-SIS, instantaneous photocurrent

  • SIS SS-EN 60 929-1992 A. C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • SIS SS-EN 60 925-1991 D.C. supplied electronic ballasts for tubularfluorescent lamps - Performance requirements
  • SIS SS-EN 60 924-1991 D.C. supplied electronic ballasts for tubular fluorescent lamps — General and safety requirements

German Institute for Standardization, instantaneous photocurrent

  • DIN EN 60904-1:2007 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:2006); German version EN 60904-1:2006
  • DIN EN 60929 Berichtigung 1:2007 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements (IEC 60929:2006); German version EN 60929:2006, Corrigenda to DIN EN 60929 (VDE 0712-23):2006-11; CENELEC-Corrigendum December 2006 to EN 60929:2006
  • DIN SPEC 70121:2012 Electromobility - Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging in the Combined Charging System
  • DIN SPEC 70121:2014 Electromobility - Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging in the Combined Charging System
  • DIN EN 62384:2007 DC or AC supplied electronic control gear for LED modules - Performance requirements (IEC 62384:2006); German version EN 62384:2006

AENOR, instantaneous photocurrent

  • UNE-EN 60909-3:2011 Short-circuit currents in three-phase a.c systems -- Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth
  • UNE-EN ISO 13129:2013 Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements (ISO 13129:2012)
  • UNE-EN 60904-1:2007 Photovoltaic devices -- Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:2006).
  • UNE 21144-1-3:2003 Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses.
  • UNE-EN 50311:2004 Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps.
  • UNE-EN 60929:2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements

IN-BIS, instantaneous photocurrent

International Telecommunication Union (ITU), instantaneous photocurrent

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, instantaneous photocurrent

  • GB/T 34936-2017 Technical requirement of combiner box for photovoltaic power station

Underwriters Laboratories (UL), instantaneous photocurrent

  • UL 1741-1999 Static inverters and charge controllers for use in photovoltaic power systems

VE-FONDONORMA, instantaneous photocurrent

Society of Motion Picture and Television Engineers (SMPTE), instantaneous photocurrent

  • SMPTE RP 188-1999 Transmission of Time Code and Control Code in the Ancillary Data Space of a Digital Television Data Stream

国家市场监督管理总局、中国国家标准化管理委员会, instantaneous photocurrent

  • GB/T 39750-2021 Technology requirements of DC arc-fault circuit protection for photovoltaic power system

CU-NC, instantaneous photocurrent

  • NC 66-96-1988 Electrotechnical and Electronic Industry. "Diadin-03" Diadynamic Current Stimulator. Quality Specifications

PL-PKN, instantaneous photocurrent

  • PN-EN IEC 60904-1-2021-06 E Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:2020)

IX-IX-IEC, instantaneous photocurrent

  • IEC 60287-1-3:2023 Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses

NL-NEN, instantaneous photocurrent

  • NEN 10099-1-1993 Non-linear resistor type gapped surge arresters for a.c. systems (IEC 99-1:1991)

Hunan Provincial Standard of the People's Republic of China, instantaneous photocurrent

  • DB43/T 2553-2023 Technical specification for constant current charging time detection of lithium-ion battery clusters for power energy storage

  Photocurrent, Photocurrent test, Photocurrent measurement, Light test current, instantaneous photocurrent, instantaneous photocurrent, photocurrent, smoke photocurrent, photoelectricity, current photocurrent, Photocurrent test current, How about the instantaneous photocurrent, photocurrent instant, Photovoltaic current, photocurrent peak, photocurrent current ratio, Test instantaneous current, photocurrent cathodic current, Instantaneous current test method, instantaneous photocurrent.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved