ZH

RU

ES

instantaneous photocurrent

instantaneous photocurrent, Total:498 items.

In the international standard classification, instantaneous photocurrent involves: Semiconductor devices, Electrical accessories, Lamps and related equipment, Power stations in general, Power transmission and distribution networks, Solar energy engineering, Integrated circuits. Microelectronics, Optoelectronics. Laser equipment, Transformers. Reactors, Technical drawings, Lighting, Rectifiers. Convertors. Stabilized power supply, Electromagnetic compatibility (EMC), Analytical chemistry, Testing of metals, Railway rolling stock, Shipbuilding and marine structures in general, Electricity. Magnetism. Electrical and magnetic measurements, Electrical wires and cables, Electric road vehicles, Rotating machinery, Nuclear energy engineering, Electronic tubes, Industrial furnaces, Galvanic cells and batteries, Paints and varnishes, Switchgear and controlgear, Aircraft and space vehicles in general, Telecommunication systems, Installations in buildings, Interface and interconnection equipment, Electrical engineering in general, Resistors, Aerospace electric equipment and systems, Fuels, Burners. Boilers, Motor cycles and mopeds, Industrial automation systems, Applications of information technology, Capacitors.


Defense Logistics Agency, instantaneous photocurrent

  • DLA DSCC-DWG-94030 REV B-2001 SEMICONDUCTOR DEVICE, UNIDIRECTIONAL TRANSIENT SUPPRESSOR DIODE ARRAY
  • DLA MIL-S-55689 NOTICE 2-1999 SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778( )/GRC
  • DLA MIL-S-55689 VALID NOTICE 1-1987 SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778( )/GRC
  • DLA MIL-S-55689-1969 SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778( )/GRC
  • DLA MIL-PRF-32085/1 VALID NOTICE 1-2007 Relay, Electromagnetic, SPST, 270 Volt DC, 120 Ampere, Hermetically Sealed, Transient Suppressed DC Coil
  • DLA MIL-PRF-6106/56 A-2013 RELAYS, ELECTROMAGNETIC, 400 AMPERES, 1 PST (N.O.),TYPE II, NON-HERMETICALLY SEALED, TRANSIENT SUPPRESSED DC COILS
  • DLA SMD-5962-94678-1994 MICROCIRCUIT, LINEAR, 20 MSPS FLASH A/D CONVERTER, MONOLITHIC SILICON
  • DLA MIL-PRF-83536/33 B-2010 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 3PDT, 25 AMPERES (RESISTIVE), PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, TRANSIENT SUPPRESSED DC COIL
  • DLA MIL-PRF-83536/19 B-2013 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 10 AMPERES, MAGNETIC LATCH, HERMETICALLY SEALED, ALL WELDED, TRANSIENT SUPPRESSED DC COILS
  • DLA MIL-PRF-83536/37 VALID NOTICE 1-2010 Relay, Electromagnetic, Established Reliability, 1PDT, 25 Amperes, Permanent Magnet Drive, Hermetically Sealed, All Welded, Transient Suppressed DC Coils
  • DLA MIL-PRF-83536/6 C-2008 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 5 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, TRANSIENT SUPPRESSED DC COILS
  • DLA MIL-PRF-83536/35 A-2012 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 1PDT, LOW LEVEL TO 10 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED ALL WELDED, TRANSIENT SUPPRESSED DC COIL
  • DLA MIL-PRF-83536/16 C-2009 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 10 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, TRANSIENT SUPPRESSED DC COIL
  • DLA MIL-PRF-83536/22 C-2010 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 3PDT, LOW LEVEL TO 10 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, TRANSIENT SUPPRESSED DC COILS
  • DLA MIL-PRF-83536/35 VALID NOTICE 2-2010 Relays, Electromagnetic, Established Reliability, 1PDT, Low Level to 10 Amperes, Permanent Magnet Drive, Hermetically Sealed All Welded, Transient Suppressed DC Coil

Institute of Electrical and Electronics Engineers (IEEE), instantaneous photocurrent

  • IEEE Std C37.011-2011 Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • IEEE 1627-2019 IEEE Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE P1627/D7, March 2019 IEEE Approved Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE P1627/D4, April 2018 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE P1627/D5, October 2018 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE P1627/D2, November 2017 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • ANSI/IEEE Std 37.011-1979 IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE Std C37.011-1979 IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE Std 328-1971*ANSI C37.0721-1971 IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers rated on a symetical current basis.
  • IEEE Std C37.011-1994 IEEE Application guide for transient recovery voltage for AC High-Voltage circuit breakers rated on a symmetrical current basis
  • IEEE Std C37.011-2005 IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • IEEE P1627/D6, February 2019 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE Std 1601-2010 IEEE Trial-Use Standard for Optical AC Current and Voltage Sensing Systems
  • IEEE Unapproved Draft Std P1601/D12, Nov 2009 Draft Trial-Use Standard for Optical A.C. Current and Voltage Sensing Systems
  • IEEE PC37.011/D7, July 2010 IEEE Draft Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • IEEE PC37.011/D10, August 2011 IEEE Draft Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • IEEE Unapproved Draft Std P1601_D10, Mar 2008.pdf IEEE Draft Trial-Use Standard for Optical A.C. Current and Voltage Sensing Systems
  • IEEE 1601-2010 Trial-Use Standard for Optical AC Current and Voltage Sensing Systems
  • IEEE Std C37.06.1-2000 Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated “Definite Purpose for Fast Transient Recovery Voltage Rise Times”
  • IEEE Std C37.011-2019 IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers with Rated Maximum Voltage above 1000 V
  • IEEE 1627 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of Surge Arrestors
  • IEEE PC37.011/D6, November 2017 IEEE Draft Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers with Rated Maximum Voltage above 1000 V
  • IEEE Std C37.09b-2010 Test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis - Amendment 2: To change the description of transient recovery voltage for harmonization with IEC 62271-100
  • IEEE Std C62.2-1987(R1994) IEEE Guide for the Application of Gapped Silicon-Carbide Surge Arresters for Alternating Current Systems
  • IEEE Std C57.12.59/COR-2006 Errata to IEEE Guide for Dry-Type Transformer Through-Fault Current Duration
  • ANSI/IEEE Std C57.109-1985 IEEE Guide for Transformer Through-Fault-Current Duration
  • IEEE Std C57.109-1985 IEEE Guide for Transformer Through-Fault-Current Duration
  • IEEE PC37.06.1/D6, October 2017 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • IEEE PC37.06.1/D5, April 2017 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • IEEE PC37.06.1/D3, July 2016 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • ANSI C37.06.1-2000 American National Standard Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated -Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • IEEE PC37.011/D9, September 2018 IEEE Approved Draft Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers with Rated Maximum Voltage above 1000V
  • IEEE Std C57.12.59-1989 Guide for dry-type transformer through-fault current duration
  • IEEE Std C57.12.59-2001 IEEE Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE Std C57.12.59-2015 Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE Std C57.109-2018 IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration
  • IEEE Std C37.04b-2008 Rating structure for ac high-voltage circuit breakers rated on a symmetrical current basis - Amendment 2: To change the description of transient recovery voltage for harmonization with IEC 62271-100

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., instantaneous photocurrent

  • IEEE 328-1971 Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.011-1994 Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE P1627/D7-2019 Draft Standard for Transient Overvoltage Protection of DC Electrification System by Application DC Surge Arresters
  • IEEE P1627/D2-2017 Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE P1627/D4-2018 Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE P1627/D5-2018 Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
  • IEEE C37.011-1979 APPLICATION GUIDE FOR TRANSIENT RECOVERY VOLTAGE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS (R 1989)
  • IEEE C37.011-2005 Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • IEEE C37.06.1-2000 Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated “Definite Purpose for Fast Transient Recovery Voltage Rise Times”
  • IEEE P1627/D1-2017 Draft Standard for Transient Overvoltage Protection of DC Electrification System by Application of Lightning Arresters
  • IEEE P1627/D6-2019 Draft Standard for Transient Overvoltage Protection of DC Electrification System by Application of Surge Arresters
  • IEEE C57.109-1985 GUIDE FOR TRANSFORMER THROUGH-FAULT-CURRENT DURATION
  • IEEE C62.1-1989 Standard for Gapped Silicon-Carbide Surge Arresters for AC Power Circuits
  • IEEE C37.36B-1990 Guide to Current Interruption with Horn-Gap Air Switches
  • IEEE C57.109-1993 Guide for Liquid-Immersed Transformer Through-Fault-Current Duration
  • IEEE C37.04B-2008 Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
  • IEEE C57.12.59 ERTA-2006 Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE C57.12.59-1989 Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE C57.12.59-2001 Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE C57.12.59-2015 Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE C37.09B-2010 Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100

Korean Agency for Technology and Standards (KATS), instantaneous photocurrent

  • KS C 8100-1992 AC supplied electronic ballasts for fluorescent lamps
  • KS C 8100-2020 AC supplied electronic ballast for fluorescent lamps
  • KS C 8100-1999 AC supplied electronic ballast for fluorescent lamps
  • KS C 8100-2014 AC supplied electronic ballast for fluorescent lamps
  • KS C 8013-2002 A.C supplied electronic ballasts for discharge lamps
  • KS C 8100-2007 AC supplied electronic ballasis for fluorescent lamps
  • KS C IEC 60925:2003 D.C. supplied electronic ballasts for tubular fluorescent lamps-Performance requirements
  • KS C IEC 60925:2013 D.C. supplied electronic ballasts for tubular fluorescent lamps-Performance requirements
  • KS C IEC 60929:2008 A.C supplied electronic ballasts for tubular fluorescent lamps-Performance requirements
  • KS C IEC 60925-2003(2008) D.C. supplied electronic ballasts for tubular fluorescent lamps-Performance requirements
  • KS C IEC 60287-1-3:2014 Electric Cables — Calculation of the current rating — Part 1-3: Current rating equations(100 % load factor) and calculation of losses — Current sharing between parallel single-core cables and calculation of circulating current losses
  • KS C IEC 60287-1-3-2014(2019) Electric Cables — Calculation of the current rating — Part 1-3: Current rating equations(100 % load factor) and calculation of losses — Current sharing between parallel single-core cables and calculat
  • KS C IEC 60904-1:2009 Photovoltaic devices-Part 1:Measurement of photovoltaic current-voltage characteristics
  • KS C IEC 60904-1-2009(2020) Photovoltaic devices-Part 1:Measurement of photovoltaic current-voltage characteristics
  • KS C IEC 62384:2011 DC or AC supplied electronic control gear for LED modules-Performance requirements
  • KS C IEC 61347-2-12:2014 Lamp controlgear — Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps(excluding fluorescent lamps)
  • KS C IEC 60044-6:2003 Instrument transformers-Part 6:Requirements for protective current transformers for transient performance
  • KS C IEC 60099-1:2003 Surge arresters-Part 1:Non-linear resistor type gapped surge arresters for a.c. systems

CZ-CSN, instantaneous photocurrent

  • CSN 33 3030-1986 Determination of transient recovery voltage forms in networks of alternating voltages.
  • CSN 34 1610-1963 Heavy-current distribution system in industrial workshops
  • CSN 35 8761-1973 Semiconductor devices. Phototransistors photodíodes. Measurement of photoelectric current
  • CSN EN 60929-1994 A.C.supplied electronic ballasts for tubular fluorescent lamps.Performance requirements
  • CSN 35 8762-1973 Semiconductor devices. Phototransistors photodiodes. Measurement of dark current

Professional Standard - Machinery, instantaneous photocurrent

  • JB/T 9302-1999 d.c.photoelectric amplifier galvanometer
  • JB/T 9478.6-1999 Measuring methods of photocell - Dark current
  • JB/T 9478.4-1999 Measuring methods of photocell - Illumination-current characteristic
  • JB/T 9617-1999 Test specification of the interture insulation on armature winding for DC machines
  • JB/T 9478.7-1999 Measuring methods of photocell - Dark current temperature characteristic
  • JB/T 9478.6-2013 Photovoltaic Cell Measurement Methods Part 6: Dark Current
  • JB/T 4311.5-2002 Indirect resistance furnaces-RJ series natural convection pit type resistance furnace
  • JB/T 5264-1991 Indirect Resistance Furnace RF Series Forced Convection Well Resistance Furnace
  • JB/T 9478.4-2013 Photovoltaic Cell Measurement Methods Part 4: Illuminance-Current Characteristics
  • JB/T 9478.7-2013 Photovoltaic cell measurement methods - Part 7: Dark current temperature characteristics

Professional Standard - Electricity, instantaneous photocurrent

  • DL/T 1074-2019 DC and AC integrated uninterruptible power supply for electric power
  • DL/T 1074-2007 Integrated uninterruptible power supply equipment of DC and AC for power system
  • DL/T 1789-2017 Fiber optic current transformer technical specification
  • DL/T 5491-2014 Technical code for the design of AC uninterruptible power system of power engineering
  • DL/T 2305-2021 Guidelines for Altitude Correction of Air Gap Discharge Voltage in HVDC Engineering

ETSI - European Telecommunications Standards Institute, instantaneous photocurrent

  • ETR 283-1996 Equipment Engineering (EE); Transient Voltages at Interface A on Telecommunications Direct Current (DC) Power Distributions
  • ETR 283 CORR.-1997 Equipment Engineering (EE); Transient Voltages at Interface A on Telecommunications Direct Current (DC) Power Distributions
  • TR 100 283-2007 "Environmental Engineering (EE); Transient voltages at Interface ""A"" on telecommunications direct current (dc) power distributions (V2.2.1)"
  • TR 100 283-2002 "Environmental Engineering (EE); Transient Voltages at Interface ""A"" on Telecommunications Direct Current (dc) Power Distributions (V2.1.1)"

Japanese Industrial Standards Committee (JISC), instantaneous photocurrent

  • JIS C 8117:1992 AC supplied electronic ballasts for fluorescent lamps
  • JIS C 8117:2008 AC supplied electronic ballasts for fluorescent lamps
  • JIS C 8120:2008 A.C.-supplied electronic ballasts for fluorescent lamps -- Performance requirements
  • JIS E 4411:2015 Rolling stock -- DC supplied electronic ballasts for lighting fluorescent lamps
  • JIS C 8117 AMD 1:2006 AC supplied electronic ballasts for fluorescent lamps (Amendment 1)
  • JIS C 8120-2:1999 A.C.-supplied electronic ballasts for fluorescent lamps -- Part 2: Performance requirements
  • JIS C 8947:2023 Spherical photovoltaic cell (SPVC) -- Measurement of photovoltaic current-voltage characteristics
  • JIS C 8904-1:2019 Photovoltaic devices -- Part 1: Measurement of photovoltaic current-voltage characteristics
  • JIS C 8120-1:1999 A.C.-supplied electronic ballasts for fluorescent lamps -- Part 1: General and safety requirements
  • JIS C 8120:2015 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps -- Performance requirements
  • JIS C 8147-2-12:2008 Lamp controlgear -- Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • JIS C 8147-2-12:2013 Lamp controlgear -- Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • JIS E 5011-2:2009 Rolling stock -- Combined testing of power convertor with ac motors -- Part 2: Convertor-inverter system with intermediate dc link
  • JIS D 61851-24:2014 Electric vehicle conductive charging system -- Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
  • JIS C 8147-2-3:2011 Lamp controlgear -- Part 2-3: Particular requirements for a.c. and d.c. supplied electronic ballasts for fluorescent lamps

ES-AENOR, instantaneous photocurrent

YU-JUS, instantaneous photocurrent

  • JUS N.K3.113-1980 High voltage alternating-current circuit-breakers. The envelope of the prospective transient recovery voltage of circuit.

British Standards Institution (BSI), instantaneous photocurrent

  • BS EN 60904-1:2006 Photovoltaic devices - Measurement of photovoltaic current-voltage characteristics
  • BS EN IEC 60904-1:2020 Photovoltaic devices. Measurement of photovoltaic current-voltage characteristics
  • PD IEC TS 63202-3:2023 Photovoltaic cells. Measurement of current-voltage characteristics of bifacial photovoltaic cells
  • BS EN 61347-2-3:2001+A2:2006 Lamp controlgear. Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
  • BS EN 60929:1992 Specification for a.c. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • BS IEC 60287-1-3:2003 Electric cables - Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses
  • BS IEC 60287-1-3:2023 Electric cables. Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses. Current sharing between parallel single-core cables and calculation of circulating current losses
  • BS EN 60929:2006 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • BS EN 60928:1995 Auxiliaries for lamps. a.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
  • BS EN 61347-2-3:2001 Lamp controlgear. Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
  • BS EN 61347-2-12+A1:2006 Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • BS EN 61347-2-12:2006 Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic Ballasts for discharge lamps (excluding fluorescent lamps)
  • BS EN 61347-2-12:2005+A1:2010 Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • BS EN IEC 61225:2020 Nuclear power plants. Instrumentation, control and electrical power systems. Requirements for static uninterruptible DC and AC power supply systems
  • BS EN 60929:2004 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • BS EN IEC 63027:2023 Photovoltaic power systems. DC arc detection and interruption
  • BS EN 60929:2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps. Performance requirements
  • 21/30431011 DC BS EN 60287-1-3. Electric cables. Calculation of the current rating. Part 1-3. Current rating equations (100 % load factor) and calculation of losses. Current sharing between parallel single-core cables and calculation of circulating current losses
  • PD IEC TS 60904-1-2:2019 Photovoltaic devices. Measurement of current-voltage characteristics of bifacial photovoltaic (PV) devices
  • BS EN 60904-1-1:2017 Photovoltaic devices - Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices
  • BS EN 62384:2006+A1:2009 DC or AC supplied electronic control gear for LED modules - Performance requirements
  • BS EN 60929:2011+A1:2016 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps. Performance requirements
  • BS EN 150014:1997 Harmonized system of quality assessment for electronic components - Blank detail specification: Thyristor diodes, transient overvoltage suppressors
  • BS EN 150014:1995 Harmonized system of quality assessment for electronic components. Blank detail specification: Thyristor diodes, transient overvoltage suppressors
  • 23/30469012 DC BS EN IEC 61225. Nuclear power plants. Instrumentation, control and electrical power systems. Requirements for static uninterruptible DC and AC power supply systems
  • BS EN 61347-2-12:2005 Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • BS EN 61851-24:2014 Electric vehicle conductive charging system. Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
  • 21/30405603 DC BS IEC 63272. Nuclear facilities. Electrical power systems. AC interruptible power supply systems
  • BS EN 60925:1991 Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
  • BS EN 50311:2003 Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps
  • BS EN 62718:2016 Railway applications. Rolling stock. DC supplied electronic ballasts for lighting fluorescent lamps
  • BS EN 61347-2-3:2011+A1:2017 Lamp control gear. Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
  • BS EN IEC 61347-2-14:2018 Lamp controlgear - articular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps
  • BS EN IEC 61347-2-14:2018+A11:2021 Lamp controlgear - Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps
  • 19/30355682 DC BS EN 60904-1. Photovoltaic devices. Part 1. Measurement of photovoltaic current-voltage characteristics
  • BS EN 60358-2:2013 Coupling capacitors and capacitor dividers. AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application
  • BS EN 62811:2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps). Performance requirements for low frequency squarewave operation
  • BS EN 61829:2016 Tracked Changes. Photovoltaic (PV) array. On-site measurement of current-voltage characteristics
  • BS EN 61377-3:2003 Railway applications - Rolling stock - Combined testing of alternating current motors, fed by an indirect convertor, and their control system
  • BS EN 61377-3:2002 Railway applications - Rolling stock - Combined testing of alternating current motors, fed by an indirect convertor, and their control system

Association Francaise de Normalisation, instantaneous photocurrent

  • NF EN IEC 61083-3:2021 Appareils et logiciels utilisés pour les mesurages pendant les essais à haute tension et à courant élevé - Partie 3 : exigences relatives au matériel pendant les essais avec des tensions et des courants alternatifs et continus
  • NF C71-239:1992 A.C. supplied electronic ballast for tubular fluorescent lamps. performance requirements.
  • NF EN ISO 13129:2013 Peintures et vernis - Mesurage électrochimique de la protection apportée à l'acier par des revêtements de peinture - Technique du courant interrompu (CI), voltamétrie de relaxation (VR) et mesurages de courants continus transitoires (CCT)
  • NF C57-321:1994 Photovaltaic devices. Part 1 : measurement of photovaltic current-voltage characteristics.
  • NF EN 60909-3:2010 Courants de court-circuit dans les réseaux triphasés à courant alternatif - Partie 3 : courants durant deux court-circuits monophasés simultanés séparés à la terre et courants de court-circuit partiels s'écoulant à travers la terre
  • NF C71-235:1992 D.C. supplied electronic ballast for tubular fluorescent lamps. Performance requirements.
  • NF C57-341*NF EN 50530:2010 Overall efficiency of grid connected photovoltaic inverters
  • NF EN IEC 61225:2020 Centrales nucléaire de puissance - Systèmes d'instrumentation, de contrôle-commande et d'alimentation électrique - Exigences pour les systèmes d'alimentation en courant alternatif et en courant continu statiques sans interruption
  • NF F62-311:2003 Railway applications - Rolling stock D.C. supplied electronic ballasts for lighting fluorescent lamps.
  • NF C42-544-6:2001 Instrument transformers - Part 6 : requirements for protective current transformers for transient performance.
  • NF C91-004-29*NF EN 61000-4-29:2001 Electromagnetic compatibilty (EMC) - Part 4-29 : testing and measurement techniques - Voltages dips, short interruptions and voltage variations on d.c. in put power port immunity tests
  • NF C71-234:1992 D.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements.
  • NF C57-108*NF EN 61829:2016 Photovoltaic (PV) array - On-site measurement of current-voltage characteristics
  • NF EN 61347-2-12/A1:2011 Appareillages de lampes - Partie 2-12 : exigences particulières pour les ballasts électroniques alimentés en courant continu ou alternatif pour lampes à décharge (à l'exclusion des lampes fluorescentes)
  • NF EN 61347-2-12:2006 Appareillages de lampes - Partie 2-12 : exigences particulières pour les ballasts électroniques alimentés en courant continu ou alternatif pour lampes à décharge (à l'exclusion des lampes fluorescentes)
  • NF C57-321*NF EN IEC 60904-1:2020 Photovoltaic devices - Part 1 : measurement of photovoltaic current-voltage characteristics
  • NF C57-321*NF EN 60904-1:2007 Photovoltaic devices - Part 1 : measurement of photovoltaic current-voltage characteristics
  • NF EN IEC 62477-2:2018 Exigences de sécurité applicables aux systèmes et matériels électroniques de conversion de puissance Partie 2 : convertisseurs électroniques de puissance entre 1 000 V en courant alternatif ou 1 500 V en courant continu et 36 kV en courant altern...
  • NF C71-238/A1:2001 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements.
  • NF C71-305*NF EN 62384:2006 D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements.
  • NF C71-238:1996 Auxiliaries for lamps. A.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements.
  • NF F62-311*NF EN 62718:2017 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
  • NF C71-239/A1*NF EN 60929/A1:2016 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • NF C71-247-12/A1*NF EN 61347-2-12/A1:2011 Lamp controlgear - Part 2-12 : particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • NF EN 60929:2011 Appareillages électroniques alimentés en courant alternatif et/ou continu pour lampes tubulaires à fluorescence - Exigences de performances
  • NF EN 60929/A1:2016 Appareillages électroniques alimentés en courant alternatif et/ou continu pour lampes tubulaires à fluorescence - Exigences de performances
  • NF C71-239*NF EN 60929:2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • NF EN 62718:2017 Applications ferroviaires - Matériel roulant - Ballasts électroniques à courant continu pour lampes fluorescentes d'éclairage
  • NF EN IEC 63027:2023 Systèmes photovoltaïques - Détection et interruption d'arc en courant continu
  • NF EN IEC 60904-1:2020 Dispositifs photovoltaïques - Partie 1 : mesurage des caractéristiques courant-tension des dispositifs photovoltaïques
  • NF EN 61851-24:2014 Système de charge conductive pour véhicules électriques - Partie 24 : communication digitale entre la borne de charge à courant continu et le véhicule électrique pour le contrôle de la charge à courant continu
  • NF EN 61829:2016 Champ de modules photovoltaïques (PV) - Mesurage sur site des caractéristiques courant-tension
  • NF C71-247-12*NF EN 61347-2-12:2006 Lamp controlgear - Part 2-12 : particular requirements for d.c or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • NF C53-228:1989 Semiconductor convertors. Switches for uninterruptible power systems (vps switches).
  • NF EN 60358-2:2014 Condensateurs de couplage et diviseurs capacitifs - Partie 2 : condensateur de couplage monophasé à courant alternatif ou à courant continu connecté entre la ligne et la terre pour application aux liaisons à courant porteur sur lignes d'énergie ...
  • NF R24-311:1987 Road vehicles. Motorcycles. Direct current flasher units.
  • NF R24-312:1987 Road vehicles. Motorcycles. Alternating current flasher units.
  • NF C46-023:1988 ELECTROMAGNETIC COMPATIBILITY MAINLY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT. ELECTRICAL FAST TRANSIENTS BURST REQUIREMENTS.
  • NF C63-975-2-4*NF EN 61851-24:2014 Electric vehicle conductive charging system - Part 24 : digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
  • NF C65-100/A1*NF EN 60099-1/A1:2000 Surge arresters - Part 1 : non-linear resistor type gapped surge arresters for a.c. systems

RU-GOST R, instantaneous photocurrent

  • GOST 24613.15-1977 Optoelectronic integrated microcircuits. Method for measuring consumption carrent of switching and its duration of logic signal switches
  • GOST 21316.2-1975 Photocells. Method of dark current measurement
  • GOST R IEC 925-1998 D.c. supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
  • GOST R IEC 924-1998 D.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
  • GOST IEC 60924-2012 D.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
  • GOST 24613.2-1981 Optoelectronic integrated microcircuits and opto-couples. Method for measuring leatage current
  • GOST 24613.19-1977 Optoelectronic integrated microcircuits and optocouplers. Method for measuring current transfer ratio
  • GOST 11612.4-1984 Photomultipliers. Measuring method of dark anode current
  • GOST 17457-1972 Glow discharge thyratrons tubes. Basic parameters
  • GOST 21107.5-1975 Gas discharge devices. Methods of measurement of electrical parameters of glow-discharge thyratrons and gas-filled rectifiers
  • GOST R IEC 929-1998 Auxiliaries for lamps. A.c.-Supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
  • GOST R IEC 60904-1-2013 Photovoltaic devices. Part 1. Measurement of photovoltaic current-voltage characteristics
  • GOST IEC 60928-2012 Auxiliaries for lamps. A.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
  • GOST R IEC 62384-2011 Electronic control gear supplied from the sources of direet or alternative current for light emitted diode modules. Performance requirements
  • GOST 18720.18-1985 Television camera tubes. Methods of measuring insulation resistance and leakage cuvvent between electrodes
  • GOST 11612.6-1983 Photomultipliers. Measuring methods of light equivalent of anode dark current noise
  • GOST R IEC 61347-2-3-2011 Lamp controlgear. Part 2-3. Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
  • GOST R IEC 928-1998 Auxiliaries for lamps. A.c.-supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
  • GOST 11612.7-1983 Photomultipliers. Measuring methods of light and spectral equivalent of anode current noise produced by luminous flux

American National Standards Institute (ANSI), instantaneous photocurrent

  • ANSI/IEEE C37.011:2011 Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • ANSI/IEEE C37.09b:2010 Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis -Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
  • ANSI/IEEE C57.12.59:2002 Guide for Dry-Type Transformer Through-Fault Current Duration
  • ANSI/IEEE C37.04b:2009 IEEE Standard for Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment to Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100

TH-TISI, instantaneous photocurrent

  • TIS 1506-1998 A.c.-supplied electronic ballasts for tubular fluorescent lamps
  • TIS 885-2008 A.c. supplied electronic ballasts for fluorescent lamps: safety requirements
  • TIS 191-1988 Standard for capacitors for use in tubular fluorescent and other discharge lamp circuits

GB-REG, instantaneous photocurrent

Group Standards of the People's Republic of China, instantaneous photocurrent

  • T/CEC 446.4-2022 Lithium battery DC power supply system for electric power Part 4: Intermittent charging DC power supply equipment
  • T/QGCML 225-2021 Operation and maintenance specification for DC combiner box of photovoltaic power station
  • T/CES 054-2021 Technical specification for optical fiber current transformers
  • T/CEEIA 390-2019 SPDs with integrated overcurrent protection function based on spark gap
  • T/GSEE 0006-2023 Full Optical Fiber Current Measurenment Device Supervision Guideline
  • T/CEC 518-2021 Pulse electroacoustic (PEA) space charge test method for extruded insulated DC cables
  • T/CEEIA 218.2-2012 Cable used in photovoltaic system Part2:AC/DC transmission power cable
  • T/ZZB 2713-2022 Permanent magnet DC motor used for solar tracking system
  • T/CSA 048-2019 Measurement of Electrical and Photometric Characteristics for General Lighting LEDs under Different Currents / Temperatures

BE-NBN, instantaneous photocurrent

ZA-SANS, instantaneous photocurrent

  • SANS 61000-4-29:2005 Electromagnetic compatibility (EMC) Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
  • SANS 60929:2006 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • SANS 60925:2001 DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • NRS 064-2005 Guidelines for the exchange of spatial information in the Electricity Supply Industry
  • SANS 60099-1:1999 Surge arresters Part 1: Non-linear resistor type gapped surge arresters for a.c systems
  • SANS 1266:2007 Ballasts for discharge lamps (excluding tubular fluorescent lamps)

European Telecommunications Standards Institute (ETSI), instantaneous photocurrent

  • ETSI ETR 283-1996 Equipment Engineering (EE); Transient Voltages at Interface A on Telecommunications Direct Current (DC) Power Distributions
  • ETSI ETR 283 CORR.-1997 Equipment Engineering (EE); Transient Voltages at Interface A on Telecommunications Direct Current (DC) Power Distributions
  • ETSI TR 100 283-2007 Environmental Engineering (EE); Transient voltages at Interface "A" on telecommunications direct current (dc) power distributions (V2.2.1)
  • ETSI TR 100 283-2002 Environmental Engineering (EE); Transient Voltages at Interface"A" on Telecommunications Direct Current (dc) Power Distributions V2.1.1

American Society for Testing and Materials (ASTM), instantaneous photocurrent

  • ASTM E1097-97 Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
  • ASTM E10-08 Standard Test Method for Brinell Hardness of Metallic Materials
  • ASTM E10-15 Standard Test Method for Brinell Hardness of Metallic Materials

International Electrotechnical Commission (IEC), instantaneous photocurrent

  • IEC 60929/COR1:1991 A.C.-supplied electronic ballasts for tubular fluorescent lamps; performance requirements
  • IEC 60929:1990 A.C.-supplied electronic ballasts for tubular fluorescent lamps; performance requirements
  • IEC 60925:1989 D.c. supplied electronic ballasts for tubular fluorescent lamps; performance requirements
  • IEC 60929:2003 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • IEC 60929:2015 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • IEC 60924/AMD1:1993 D.C. supplied electronic ballasts for tubular fluorescent lamps; general and safety requirements; amendment 1
  • IEC 60929:2006 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • IEC 60925:2001 DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • IEC 60925/AMD2:2001 DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements; Amendment 2
  • IEC 60929/AMD1:1994 A.C.-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements; Amendment 1
  • IEC 60929/AMD2:1996 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements; Amendment 2
  • IEC 60929:2011/AMD1:2015 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • IEC 60929:2011+AMD1:2015 CSV AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • IEC 61225:2019 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems
  • IEC 60287-1-3:2002 Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses; Current sharing between parallel single-core cables and calculation of circulating current losses
  • IEC 60287-1-3:2023 CMV Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calcula
  • IEC TS 63202-3:2023 Photovoltaic cells - Part 3: Measurement of current-voltage characteristics of bifacial photovoltaic cells
  • IEC 60924:1990 D.C. supplied electronic ballasts for tubular fluorescent lamps; general and safety requirements
  • IEC 63027:2023 Photovoltaic power systems - DC arc detection and interruption
  • IEC 60904-1:1987 Photovoltaic devices; part 1: measurement of photovoltaic current-voltage characteristics
  • IEC 60904-1:2006 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • IEC 60904-1:2020 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • IEC 60928:1999 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements
  • IEC 60928:1995 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements
  • IEC 62384:2006 D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements
  • IEC 61347-2-12:2010 Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • IEC 61829:2015 Photovoltaic (PV) array - On-site measurement of current-voltage characteristics
  • IEC 62384:2011 DC or AC supplied electronic control gear for LED modules - Performance requirements
  • IEC 60747-5-11:2019 Semiconductor devices - Part 5-11: Optoelectronic devices - Light emitting diodes - Test method of radiative and nonradiative currents of light emitting diodes
  • IEC 61347-2-12:2005/AMD1:2010 Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • IEC 61347-2-12:2005+AMD1:2010 CSV Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • IEC 61347-2-12:2005 Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • IEC 62718:2013 Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps
  • IEC 61851-24:2014 Electric vehicle conductive charging system - Part 24: Digital communication between a dc EV charging station and an electric vehicle for control of d.c. charging
  • IEC 63128:2019 Lighting control interface for dimming – Analogue voltage dimming interface for electronic current sourcing controlgear
  • IEC 60099-1:1999 Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems

Danish Standards Foundation, instantaneous photocurrent

  • DS/EN 60929:1994 A.C supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • DS/EN 60909-3:2010 Short-circuit currents in three-phase a.c systems - Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth
  • DS/EN 60044-6:2000 Instrument transformers - Part 6: Requirements for protective current transformers for transient performance
  • DS/IEC 60287-1-3:2002 Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses
  • DS/EN 60928+A2:1994 A.C supplied electronic ballasts for tubular fluorescent lamps - General and safety requriements
  • DS/EN 60904-1:1994 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • DS/EN 60904-1:2007 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • DS/EN IEC 60904-1:2020 Photovoltaic devices – Part 1: Measurement of photovoltaic current-voltage characteristics
  • DS/EN 50311:2004 Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps
  • DS/IEC 62718:2013 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
  • DS/EN 60929/AC:2012 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • DS/EN 60929:2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • DS/EN 61347-2-12/Corr. Dec. 2010:2011 Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • DS/EN 61347-2-12/A1:2011 Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • DS/EN 61347-2-12:2006 Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • DS/EN 60925:1994 D.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • DS/EN ISO 13129:2013 Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements

Professional Standard - Light Industry, instantaneous photocurrent

  • QB/T 2871-2007 AC-supplied electronic ballasts for electrodeless fluorescent lamps
  • QB/T 2878-2007 Auxiliaries for lamps.D.C.or A.C.supplied electronic ballasts for discharge lamps (excluding fluorescent lamps).performance requirements

U.S. Military Regulations and Norms, instantaneous photocurrent

JP-JEM, instantaneous photocurrent

US-FCR, instantaneous photocurrent

Professional Standard-Ships, instantaneous photocurrent

  • CB 1290-1996 Specifications for Marine DC Uninterruptible Power Supply

工业和信息化部, instantaneous photocurrent

  • YD/T 1095-2018 AC uninterruptible power supply (UPS) for communications
  • YD/T 4006-2022 10kV AC input DC uninterruptible power supply system for information and communication
  • YD/T 4151-2022 Small integrated AC and DC uninterruptible power supply
  • YD/T 2165-2017 Modular AC uninterruptible power supply for communications

AENOR, instantaneous photocurrent

  • UNE-EN 60909-3:2011 Short-circuit currents in three-phase a.c systems -- Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth
  • UNE 21144-1-3:2003 Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses.
  • UNE-EN 50311:2004 Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps.
  • UNE-EN 60929:2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • UNE-EN 61347-2-12:2006/A1:2011 Lamp controlgear -- Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • UNE-EN 61851-24:2015 Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
  • UNE 21186:2011 Protection against lighting: Surge arresters using early streamer emission air terminals
  • UNE-EN 60904-1:2007 Photovoltaic devices -- Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:2006).
  • UNE-EN 61347-2-12:2006 Lamp controlgear -- Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-12:2005)

SG-SPRING SG, instantaneous photocurrent

  • SS 24-1970 SPECIFICATION FOR BALLASTS FOR FLUORESCENT LAMPS ON A.C. 50 Hz. SUPPLIES
  • SS 24-1987 SPECIFICATION FOR Ballasts For Fluorescent Lamps On A.C. 50 Hz Supplies

CENELEC - European Committee for Electrotechnical Standardization, instantaneous photocurrent

  • EN 60929:2006 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • EN 60929:2004 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • EN 60044-6:1999 Instrument Transformers Part 6: Requirements for Protective Current Transformers for Transient Performance
  • EN 60904-1:1993 Photovoltaic Devices Part 1: Measurement of Photovoltaic Current-Voltage Characteristics
  • EN 60928:1995 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements (Incorporates Amendment A1: 1999)
  • EN 60928:1994 A.C. Supplied Electronic Ballasts for Tubular Fluorescent Lamps - General and Safety Requirements
  • EN 60929:1992/A1:1995 A.C. Supplied Electronic Ballasts for Tubular Fluorescent Lamps Performance Requirements

European Committee for Electrotechnical Standardization(CENELEC), instantaneous photocurrent

  • EN 60929:2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • EN IEC 61225:2020 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems
  • EN IEC 60904-1:2020 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • EN 62718:2016 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
  • EN 50311:2003 Railway applications - Rolling stock D.C. supplied electronic ballasts for lighting fluorescent lamps
  • EN 60904-1:2006 Photovoltaic devices Part 1: Measurement of photovoltaic current-voltage characteristics
  • EN 61851-24:2014 Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging

未注明发布机构, instantaneous photocurrent

  • BS EN 60044-6:1999 Instrument transformers — Part 6 : Requirements for protective current transformers for transient performance
  • BS IEC 60287-1-3:2002 Electric cables — Calculation of the current rating — Part 1 - 3 : Current rating equations (100 % load factor) and calculation of losses — Current sharing between parallel single - core cables and calculation of circulating current losses
  • BS EN 60909-3:2010(2013) Short - circuit currents in three - phase a . c systems Part 3 : Currents during two separate simultaneous line - to - earth short - circuits and partial short - circuit currents flowing through earth
  • DIN EN 62747:2020 Terminology for voltage intermediate circuit converters (VSC) for high-voltage direct current (HVDC) systems
  • BS EN 60099-1:1994(2001) Surge arresters — Part 1 : Non - linear resistor type gapped surge arresters for A.C. systems

SE-SIS, instantaneous photocurrent

  • SIS SS-EN 60 929-1992 A. C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • SIS SS-EN 60 925-1991 D.C. supplied electronic ballasts for tubularfluorescent lamps - Performance requirements
  • SIS SS-EN 60 924-1991 D.C. supplied electronic ballasts for tubular fluorescent lamps — General and safety requirements
  • SIS SS-EN 60 928-1991 A.C. supplied electronic ballasts for tubularfluorescent lamps - General and safety requirements

Standard Association of Australia (SAA), instantaneous photocurrent

  • IEC 60909-3:2009 RLV Short-circuit currents in three-phase AC systems — Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth
  • AS/NZS 60929:2005 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • AS/NZS IEC 60904.1:2023 Photovoltaic devices, Part 1: Measurement of photovoltaic current-voltage characteristics
  • AS/NZS IEC 61829:2020 Photovoltaic (PV) array — On-site measurement of current-voltage characteristics
  • AS IEC 61851.24:2014 Electric vehicle conductive charging system, Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging

Society of Automotive Engineers (SAE), instantaneous photocurrent

  • SAE J2836-3-2017 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2836-4-2021 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2836-2018 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2836-2-2011 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2836-6-2021 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2836-5-2021 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2847/2-2015 Communication Between Plug-In Vehicles and Off-Board DC Chargers
  • SAE J2847/2-2011 Communication Between Plug-in Vehicles and Off-Board DC Chargers
  • SAE J2847/2-2012 Communication Between Plug-In Vehicles and Off-Board DC Chargers
  • SAE J2847/2-2023 Communication Between Plug-in Vehicles and Off-Board DC Chargers
  • SAE J2836/2-2011 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger
  • SAE J2836/2-2023 Use Cases for Communication Between Plug-in Vehicles and Off-Board DC Charger

Professional Standard - Energy, instantaneous photocurrent

国家能源局, instantaneous photocurrent

  • NB/T 10693-2021 Modular AC uninterruptible power supply system
  • NB/T 32045-2018 Design specifications for DC power generation systems of photovoltaic power stations
  • NB/T 10685-2021 Technical specifications for combiner boxes for photovoltaic power generation

National Electrical Manufacturers Association(NEMA), instantaneous photocurrent

  • NEMA C82.3-2016 Electric Lamps - Reference Ballasts for Fluorescent Lamps
  • NEMA C78.5-2003 Electric Lamps - Specifications for Performance of Self-ballasted Compact Fluorescent Lamps
  • NEMA BL 2-2007 ENERGY EFFICIENCY FOR ELECTRONIC BALLASTS FOR T8 FLUORESCENT LAMPS
  • NEMA C82.1-1997 Electric Lamp Ballast - Line Frequency Fluorescent Lamp Ballast Revision of ANSI C82.1-1985(R1992); First Edition

European Committee for Standardization (CEN), instantaneous photocurrent

  • prEN 60904-1-1993 Photovoltaic devices; part 1: measurement of photovoltaic current-voltage characteristics (IEC 904-1:1987)
  • EN 60925:1991 D.C. supplied electronic ballasts for tubular fluorescent lamps; performance requirements (IEC 925:1989)
  • EN ISO 13129:2012 Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements
  • EN 60924:1991 D.C. supplied electronic ballasts for tubular fluorescent lamps; general and safety requirements (IEC 924:1990)
  • EN 60928:1991 A.C. supplied electronic ballasts for tubular fluorescent lamps; general and safety requirements (IEC 928:1990)
  • EN 60929:1992 A.C.-supplied electronic ballasts for tubular fluorescent lamps; performance requirements (IEC 929:1990 + corrigendum june 1991)
  • EN 2349-304:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time

VN-TCVN, instantaneous photocurrent

  • TCVN 7674-2007 AC-supplied electronic ballasts for tubular fluorescent lamps.Performance requirements
  • TCVN 7674-2014 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • TCVN 7590-2-12-2007 Lamp controlgear.Part 2-12: Particular requirements for d.c or a.c-supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)

Indonesia Standards, instantaneous photocurrent

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, instantaneous photocurrent

  • GB/T 15144-1994 A.C.supplied electronic ballasts for tubular fluorescent lamps-Performence requirements
  • GB/T 15144-2005 A.C.supplied electronic ballasts for tubular fluorescent lamps Performance requirements
  • GB/T 15144-2009 Performance requirements for AC electronic ballasts for tubular fluorescent lamps
  • GB/T 19656-2005 DC supplied electronic ballasts for tubular fluorescent lamps--Performance requirements
  • GB/T 22716-2008 Test specifications of interturn insulation of armature winding for DC electrical machines
  • GB/T 6495.1-1996 Photovoltaic devices. Part 1: Measurement of photovoltaic current-voltage characteristics
  • GB 19510.13-2007 Lamp controlgear.Part 13:Particular requirements for d.c.or a.c.supplecd electronic ballasts for discharge lamps(excluding fluorescent lamps)
  • GB 3379-1982 Interoffice direct signalling system for telephone automatic switching network
  • GB 15143-1994 A.Csupplied electronic ballests for tubuler fluorescent lamps. General and safety requirenents
  • GB/T 15143-1994 A.C supplied electronic ballasts for tubular fluorescent lamps—General and safety requirements

Professional Standard - Railway, instantaneous photocurrent

  • TB/T 2219-2005 DC supplied electronic ballasts for railway passenger car
  • TB/T 1691-1995 Direct Current Signal Mode Between Railway Telephone Switching Networks

German Institute for Standardization, instantaneous photocurrent

  • DIN EN 60929 Berichtigung 1:2007 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements (IEC 60929:2006); German version EN 60929:2006, Corrigenda to DIN EN 60929 (VDE 0712-23):2006-11; CENELEC-Corrigendum December 2006 to EN 60929:2006
  • DIN SPEC 70121:2012 Electromobility - Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging in the Combined Charging System
  • DIN SPEC 70121:2014 Electromobility - Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging in the Combined Charging System
  • DIN EN 62384:2007 DC or AC supplied electronic control gear for LED modules - Performance requirements (IEC 62384:2006); German version EN 62384:2006
  • DIN EN 60904-1:2007 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:2006); German version EN 60904-1:2006
  • DIN SPEC 70121:2014-12 Electromobility - Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging in the Combined Charging System; Text in English
  • DIN EN 50311:2004 Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps; German version EN 50311:2003
  • DIN IEC 61225:2017 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems (IEC 45A/1138/CD:2017)
  • DIN EN 62384:2010 DC or AC supplied electronic control gear for LED modules - Performance requirements (IEC 62384:2006 + A1:2009); German version EN 62384:2006 + A1:2009
  • DIN EN 60099-1:2000 Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems (IEC 60099-1:1991 + A1:1999); German version EN 60099-1:1994 + A1:1999
  • DIN EN 60099-4:2010 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems (IEC 60099-4:2004, modified + A1:2006 + A2:2009); German version EN 60099-4:2004 + A1:2006 + A2:2009

Taiwan Provincial Standard of the People's Republic of China, instantaneous photocurrent

  • CNS 13059.1-1992 Photovoltaic Devices Part 1:Measurement of Photovoltaic Current─Voltage Characteristics
  • CNS 13059-1-1992 Photovoltaic Devices Part 1:Measurement of Photovoltaic Current─Voltage Characteristics
  • CNS 13755-2006 AC supplied electronic ballasts for fluorescent lamp
  • CNS 13755-1998 AC supplied electronic ballasts for fluorescent lamp

Lithuanian Standards Office , instantaneous photocurrent

  • LST EN 60909-3-2010 Short-circuit currents in three-phase a.c systems -- Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth (IEC 60909-3:2009)
  • LST EN 50311-2004 Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps
  • LST EN 60924+A1-1999 D.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements (IEC 60924:1990)
  • LST EN 60904-1-2007 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:2006)
  • LST EN IEC 60904-1:2021 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:2020)
  • LST EN 60929-2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements (IEC 60929:2011)
  • LST EN 60929-2011/AC-2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements (IEC 60929:2011)
  • LST EN 61347-2-12-2005 Lamp controlgear. Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-12:2005)
  • LST EN 61347-2-12-2005/AC-2011 Lamp controlgear. Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-12:2005)

国家机械工业局, instantaneous photocurrent

  • JB/T 9697-1999 Specification for interturn insulation test of DC motor armature windings

IX-IX-IEC, instantaneous photocurrent

  • IEC 60287-1-3:2023 Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses

GOSTR, instantaneous photocurrent

  • GOST R 58649-2019 Photovoltaic array. On-site measurement of current-voltage characteristics
  • GOST IEC 60929-2017 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps. Performance requirements

ES-UNE, instantaneous photocurrent

  • UNE-EN IEC 61225:2020 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems (Endorsed by Asociación Española de Normalización in May of 2020.)
  • UNE-EN 60929:2011 ERRATUM:2012 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
  • EN IEC 63027:2023 Photovoltaic power systems - DC arc detection and interruption
  • UNE-EN IEC 60904-1:2021 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • UNE-EN 62718:2016 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
  • UNE-EN 61829:2016 Photovoltaic (PV) array - On-site measurement of current-voltage characteristics
  • UNE-EN 60929:2011/A1:2016 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements (Endorsed by AENOR in April of 2016.)
  • UNE-EN 61347-2-12:2006 CORR:2011 Lamp controlgear -- Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
  • UNE-EN 61851-24:2015/AC:2015 Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
  • UNE-EN 60099-9:2014 Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations (Endorsed by AENOR in January of 2015.)

United States Navy, instantaneous photocurrent

机械电子工业部, instantaneous photocurrent

  • JB 4311.5-1991 Indirect resistance furnace RJ series natural convection well type resistance furnace

Underwriters Laboratories (UL), instantaneous photocurrent

  • UL 1741-1999 Static inverters and charge controllers for use in photovoltaic power systems
  • UL SUBJECT 1699B-2013 OUTLINE OF INVESTIGATION FOR PHOTOVOLTAIC (PV) DC ARC-FAULT CIRCUIT PROTECTION (Issue 2)

Professional Standard - Electron, instantaneous photocurrent

  • SJ 2215.10-1982 Method of measurement for direct current transfer ratio of semiconductor photocouplers
  • SJ 2354.3-1983 Method of measurement for dark current of PIN and avalanche photodiodes
  • SJ 1389-1978 Methods of measurement for diodes leakage current between electrodes of noise-generator diodes
  • SJ 2214.10-1982 Method of measurement for light current of semiconductor photodiodes and phototransistors
  • SJ 455-1973 Methods of measurement for static interelectrode capacitance of high-voltage rectifier tubes
  • SJ 366-1973 Measurement of interelectrode leakage current of reflex klystrons

International Telecommunication Union (ITU), instantaneous photocurrent

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, instantaneous photocurrent

  • GB/T 34936-2017 Technical requirement of combiner box for photovoltaic power station
  • GB/T 34933-2017 Technical code for combiner box test of photovoltaic power station

NEMA - National Electrical Manufacturers Association, instantaneous photocurrent

  • NEMA C78.5-1991 Electric Lamps - Fluorescent Self-Ballasted Lamps - Performance Guide
  • NEMA BL 2-2009 ENERGY EFFICIENCY FOR ELECTRONIC BALLASTS FOR T8 FLUORESCENT LAMPS

国家市场监督管理总局、中国国家标准化管理委员会, instantaneous photocurrent

  • GB/T 39750-2021 Technology requirements of DC arc-fault circuit protection for photovoltaic power system
  • GB/T 15144-2020 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps—Performance requirements

IN-BIS, instantaneous photocurrent

CU-NC, instantaneous photocurrent

  • NC 66-96-1988 Electrotechnical and Electronic Industry. "Diadin-03" Diadynamic Current Stimulator. Quality Specifications

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, instantaneous photocurrent

  • JEDEC JESD66-1999 Transient Voltage Suppressor Standard for Thyristor Surge Protective Device Rating Verification and Characteristic Testing

TIA - Telecommunications Industry Association, instantaneous photocurrent

  • TIA/EIA-41.2-D-1997 Cellular Radiotelecommunications Intersystem Operations: Intersystem Handoff Information Flows
  • TIA/EIA/IS-41.2-C-1996 Cellular Radiotelecommunications Intersystem Operations: Intersystem Handoff Information Flows

Canadian Standards Association (CSA), instantaneous photocurrent

  • CSA TIL B-37-1988 Lighting; Solid State (Electronic) Fluorescent Ballasts; Interim Certification Requirements
  • CSA CEI-E928-CAN/CSA-1998 Appareils Auxiliaires Pour Lampes - Ballasts Electroniques Alimentes En Courant Alterntif Pour Lampes Tubulaires A Fluorescence Premiere Edition; Fiche No 1; CEI 982: 1995

NL-NEN, instantaneous photocurrent

  • NEN 10099-1-1993 Non-linear resistor type gapped surge arresters for a.c. systems (IEC 99-1:1991)
  • NEN 10929-1993 A.C.-supplied electronic ballasts for tubular fluorescent lamps. Performance requirements (IEC 929:1990+Corrigendum June 1991)

Hunan Provincial Standard of the People's Republic of China, instantaneous photocurrent

  • DB43/T 2553-2023 Technical specification for constant current charging time detection of lithium-ion battery clusters for power energy storage

PL-PKN, instantaneous photocurrent

  • PN E93100-05-1987 Electrical accessories Installation fuses of rated voltage up to 1000 V and rated current up to 200 A Fuse-links Dimensions and time/current characteristics
  • PN-EN IEC 60904-1-2021-06 E Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:2020)

RO-ASRO, instantaneous photocurrent

  • STAS 11232/5-1981 Stabilized power supplies, d.c. outputTEMPERATURE EFFECT, TRANSIENT PERFORMANCE MEASUREMENT, SETTLING EFFECTS Prescription

Qinghai Provincial Standard of the People's Republic of China, instantaneous photocurrent

  • DB63/T 1454-2015 Photovoltaic Power Station Equipment Maintenance Regulations Part 3: DC Power Distribution Cabinet
  • DB63/T 1458-2015 Photovoltaic Power Plant Equipment Operation Regulations Part 3: DC Power Distribution Cabinet




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved