ZH
RU
ES

.Ultrasound detection

.Ultrasound detection, Total:499 items.

In the international standard classification, .Ultrasound detection involves: Non-destructive testing, Vocabularies, Testing of metals, Welding, brazing and soldering, Protection against crime, Metrology and measurement in general, Iron and steel products, Mechanical testing.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, .Ultrasound detection

GB/T 27669-2011 Non-destructive testing.Ultrasonic inspection.Evaluating electronic characteristics of ultrasonic test instruments
GB/T 23902-2009 Non-destructive testing.Ultrasonic examination.Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
GB/T 32563-2016 Non-destructive testing.Ultrasonic testing.Test method for phased-array ultrasonic testing
GB/T 23905-2009 Non-destructive testing.Blocks for ultrasonic testing
GB/T 31211-2014 Non-destructive testing.Ultrasonic guided wave testing.General principle
GB/T 19799.2-2012/ISO 7963:2006 Non=destructive testing--Ultrasonic testing--Specification for calibration block No.2
GB/T 19799.2-2012/ISO 7963-2006 Non=destructive testing--Ultrasonic testing--Specification for calibration block No.2
GB/T 19799.2-2005 Non-destructive testing.Ultrasonic testing.Calibration block No.2
GB/T 19799.1-2005 Non-destructive testing-Ultrasonic testing-Calibration block No.1
GB/T 29712-2013 Non-destructive testing of welds.Ultrasonic testing.Acceptance levels
GB/T 19799.2-2012 Non-destructive testing.Ultrasonic testing.Specification for calibration block No.2
GB/T 19799.1-2015 Non-destructive testing.Ultrasonic testing.Specification for calibration block No. 1
GB/T 23904-2009 Non-destructive testing.Test method for ultrasonic testing by surface wave
GB/T 29711-2013 Non-destructive testing of welds.Ultrasonic testing.Characterization of indications in welds
GB/T 11345-2013 Non-destructive testing of welds.Ultrasonic testing.Techniques, testing levels, and assessment
GB/T 18694-2002 Non-destructivetesting--Ultrasonic inspection--Characterization of search unit and sound field
GB/T 11259-2008 Non-destructive testing.Practice for fabrication and control of steel reference blocks used in ultrasonic testing
GB/T 27664.1-2011 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 1:Instruments
GB/T 27664.2-2011 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 2:Probes
GB/T 11259-2015 Non-destructive testing.Practice for fabrication and control of steel reference blocks used in ultrasonic testing
GB/T 41655-2022 Non-destructive testing—Ultrasonic testing—Technique of testing claddings produced by welding, rolling and explosion
GB/T 12604.1-1990 Terminology for nondestructive testing--Ultrasonic testing
GB/T 12604.1-2005 Non-destructive testing-Terminology-Terms used in ultrasonic testing
GB/T 27664.3-2012 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 3:Combined equipment
GB/T 18852-2002 Ultrasonic non-destructive testing--Reference blocks and test procedures for the characterization of contact search unit beam profiles

国家市场监督管理总局、中国国家标准化管理委员会, .Ultrasound detection

GB/T 23902-2021 Non-destructive testing—Ultrasonic testing—Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
GB/T 39240-2020 Non-destructive testing—Ultrasonic testing—General principles
GB/T 40332-2021 Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment
GB/T 41114-2021 Non-destructive testing—Ultrasonic testing—Specification for a calibration block for phased array testing(PAUT)
GB/T 39241-2020 Non-destructive testing—Ultrasonic testing—Transmission technique
GB/T 39432-2020 Non-destructive testing—Ultrasonic testing—Specification for step wedge calibration block
GB/T 11344-2021 Non-destructive testing—Ultrasonic thickness measurement
GB/T 40733-2021 Non-destructive testing of welds—Ultrasonic testing—Use of automated phased array technology
GB/T 39242-2020 Non-destructive testing—Ultrasonic testing—Sensitivity and range setting
GB/T 39239-2020 Non-destructive testing—Ultrasonic testing—Characterization and sizing of discontinuities
GB/T 39238-2020 Non-destructive testing—Ultrasonic testing—Examination for discontinuities perpendicular to the surface
GB/T 41115-2021 Non-destructive testing of welds—Ultrasonic testing—Use of time-of-flight diffraction technique (TOFD)
GB/T 40732-2021 Non-destructive testing of welds—Ultrasonic testing—Testing of welds in austenitic steels and nickel-based alloys
GB/T 12604.1-2020 Non-destructive testing—Terminology—Ultrasonic testing
GB/T 18852-2020 Non-destructive testing—Ultrasonic testing—Reference blocks and test procedures for the characterization of contact probe sound beams

ZA-SANS, .Ultrasound detection

SANS 12710:2003 Non-destructive testing - Ultrasonic inspection - Evaluating electronic characteristics of ultrasonic test instruments
SANS 393:2004 Non-destructive testing - Ultrasonic inspection - Vocabulary
SANS 396:2004 Non-destructive testing - Ultrasonic inspection - Characterization of search unit and sound field
SANS 12715:2004 Ultrasonic non-destructive testing - Reference blocks and test procedures for the characterization of contact search unit beam profiles

工业和信息化部, .Ultrasound detection

JB/T 13935-2020 Non-destructive testing instrument ultrasonic detection ultrasonic diffraction sound time detector
JB/T 13463-2018 Preparation and inspection methods of oblique incidence test blocks for non-destructive testing and ultrasonic testing

CZ-CSN, .Ultrasound detection

CSN 35 6884-1973 Ultrasonic testing. Ultrasound probe

International Organization for Standardization (ISO), .Ultrasound detection

ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
ISO/CD 16831:2023 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
ISO 16831:2012 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
ISO 16810:2012 Non-destructive testing - Ultrasonic testing - General principles
ISO/CD 5577:2023 Non-destructive testing — Ultrasonic testing — Vocabulary
ISO/CD 16810:2023 Non-destructive testing — Ultrasonic testing — General principles
ISO/CD 16823:2011 Non-destructive testing — Ultrasonic testing — Through-transmission technique
ISO 16809:2012 Non-destructive testing - Ultrasonic thickness measurement
ISO 16809:2017 Non-destructive testing - Ultrasonic thickness measurement
ISO 16811:2012 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
ISO 7963:2022 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
ISO/CD 16811:2011 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
ISO 5577:2000 Non-destructive testing - Ultrasonic inspection - Vocabulary
ISO/CD 16946 Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block
ISO/DIS 16946:2023 Non-destructive testing — Ultrasonic testing — Specification for a step wedge calibration block
ISO 16946:2015 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
ISO 7963:2006 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
ISO 23279:2017 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
ISO 22232-2:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes
ISO 22232-1:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments
ISO/CD 16826:2011 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
ISO 16823:2012 Non-destructive testing - Ultrasonic testing - Transmission technique
ISO/CD 16827:2023 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
ISO 22232-3:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 3: Combined equipment
ISO 17405:2022 Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
ISO 11666:2010 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies
ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
ISO 20601:2018 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
ISO 12710:2002 Non-destructive testing - Ultrasonic inspection - Evaluation electronic characteristics of untrasonic test instruments
ISO 23243:2020 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary
ISO 16826:2012 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface
ISO 16827:2012 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
ISO 23865:2021 Non-destructive testing -- Ultrasonic testing -- General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
ISO 22825:2006 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys

Korean Agency for Technology and Standards (KATS), .Ultrasound detection

KS B ISO 5577-2016(2021) Non－destructive testing－Ultrasonic inspection－Vocabulary
KS B ISO 12710:2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
KS B ISO 16810:2019 Non-destructive testing ― Ultrasonic testing ― General principles
KS B ISO 5577:2022 Non-destructive testing — Ultrasonic testing — Vocabulary
KS B ISO 16823:2022 Non-destructive testing — Ultrasonic testing —Transmission technique
KS B ISO 11666:2019 Non-destructive testing of welds ― Ultrasonic testing ― Acceptance levels
KS B ISO 23279-2007(2012) Non-destructive testing of welds－Ultrasonic testing－Characterization of indications in welds
KS B ISO 2400:2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
KS B ISO 10375:2018 Non-destructive testing — Ultrasonic inspection — Characterization of search unit and sound field
KS B ISO 16827:2022 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
KS B ISO 17640:2019 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
KS B ISO 23279-A:2019 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
KS B ISO 16826:2022 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
KS B ISO 22825-2006(2011) Non-destructive testing of welds－Ultrasonic testing－Testing of welds in austenitic steels and nickel-based alloys
KS B ISO 10375:2008 Non-destructive testing－Ultrasonic inspection－Characterization of search unit and sound field
KS B ISO 23243:2022 Non-destructive testing — Ultrasonic testing with arrays — Vocabulary
KS B ISO 20601:2021 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
KS B ISO 12710:2005 Non-destructive testing－Ultrasonic inspection－Evaluating electronic characteristics of ultrasonic test instruments

Danish Standards Foundation, .Ultrasound detection

DS/EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
DS 2333:1987 Non-destructive testing. Ultrasonic testing. Terminology
DS/EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
DS/EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
DS/EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
DS/EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
DS/EN 583-3:1998 Non destructive testing - Ultrasonic examination - Part 3: Transmission technique
DS/EN ISO 23243:2020 Non-destructive testing – Ultrasonic testing with arrays – Vocabulary (ISO 23243:2020)
DS/EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds
DS/EN 583-1/A1:2004 Non-destructive testing - Ultrasonic examination - Part 1: General principles
DS/EN 583-1:1999 Non-destructive testing - Ultrasonic examination - Part 1: General principles
DS/EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
DS/EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
DS/EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
DS/ISO 22232-3:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 3: Combined equipment
DS/EN 12668-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
DS/EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
DS/EN 583-2:2001 Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting
DS/EN 10308:2002 Non destructive testing - Ultrasonic testing of steel bars
DS/EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
DS/EN 12668-3/A1:2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
DS/EN 12668-3:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
DS/EN ISO 22232-3:2020 Non-destructive testing – Characterization and verification of ultrasonic test equipment – Part 3: Combined equipment (ISO 22232-3:2020)
DS/ISO 23864:2021 Non‐destructive testing of welds – Ultrasonic testing – Use of automated total focusing technique (TFM) and related technologies
DS/EN 583-4/A1:2004 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
DS/EN 583-4:2002 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
DS/EN 583-5/A1:2004 Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities
DS/EN 583-5:2001 Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities
DS/ISO 23865:2021 Non-destructive testing – Ultrasonic testing – General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies

Lithuanian Standards Office , .Ultrasound detection

LST EN 15317-2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
LST EN 14127-2011 Non-destructive testing - Ultrasonic thickness measurement
LST EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
LST EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
LST EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
LST EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
LST EN 583-3-2000 Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique
LST EN 583-1-2000 Non-destructive testing - Ultrasonic examination - Part 1: General principles
LST EN 583-1-2000/A1-2004 Non-destructive testing - Ultrasonic examination - Part 1: General principles
LST EN 12668-1-2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
LST EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012)
LST EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds (ISO 23279:2010)
LST EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
LST EN 12668-2-2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
LST EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012)
LST EN 583-2-2003 Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting
LST EN 10308-2002 Non destructive testing - Ultrasonic testing of steel bars
LST EN 12668-3-2001 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
LST EN 12668-3-2001/A1-2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
LST EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)
LST EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011)
LST EN ISO 22232-2:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
LST EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
LST EN 12668-3-2014 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
LST EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012)
LST EN 583-4-2003 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
LST EN 583-4-2003/A1-2004 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
LST EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
LST EN 583-5-2003 Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities
LST EN 583-5-2003/A1-2004 Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities

AENOR, .Ultrasound detection

UNE-EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
UNE-EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
UNE-EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017)
UNE-EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
UNE-EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
UNE-EN ISO 7963:2011 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
UNE-EN ISO 2400:2013 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
UNE-EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
UNE-EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012)
UNE-EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
UNE-EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017)
UNE-EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds (ISO 23279:2010)
UNE-EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012)
UNE-EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
UNE-EN 12668-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
UNE-EN ISO 16826:2014 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012)
UNE-EN ISO 13588:2013 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012)
UNE-EN 10308:2002 Non destructive testing - Ultrasonic testing of steel bars
UNE-EN 12668-3:2014 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
UNE-EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)
UNE-EN ISO 10863:2012 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011)
UNE-EN ISO 17405:2015 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2014)
UNE-EN 16392-2:2014 Non-destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2: Probes

European Committee for Standardization (CEN), .Ultrasound detection

prEN ISO 16831 rev Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
prEN ISO 5577 Non-destructive testing — Ultrasonic testing — Vocabulary
EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
prEN ISO 16810 rev Non-destructive testing — Ultrasonic testing — General principles
prEN ISO 16823 rev Non-destructive testing — Ultrasonic testing — Transmission technique
EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles
EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
EN ISO 16946:2015 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2015)
prEN ISO 16811 rev Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
EN ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
prEN ISO 16946 rev Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
EN ISO 11666:2010 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
EN ISO 17640:2017 Non-destructive testing of welds - Ultrasonic testing - Techniques@ testing levels@ and assessment
EN ISO 7963:2022 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
EN 583-3:1997 Non-Destructive Testing - Ultrasonic Examination - Part 3: Transmission Technique
EN ISO 22232-2:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
prEN ISO 16826 rev Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
prEN ISO 16827 rev Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
EN ISO 22232-3:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
EN ISO 17640:2010 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
EN ISO 23864:2021 Non‐destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) [Superseded: CEN CEN/TS 14751]
EN 583-2:2001 Non-Destructive Testing - Ultrasonic Examination - Part 2: Sensitivity and Range Setting
EN 12668-3:2013 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
EN 583-1:1998 Non-destructive testing Ultrasonic examination Part 1: General principles Includes amendment A1:2003
EN ISO 23243:2020 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)
EN ISO 17405:2022 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2022)
prEN ISO 17405:2021 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO/DIS 17405:2021)
prEN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
EN ISO 16826:2014 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012)
EN 17290:2021 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
EN 15317:2013 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
EN ISO 18563-1:2022 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022)
EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
prEN ISO 16828 rev Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
EN ISO 17405:2014 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding@ rolling and explosion
EN ISO 22825:2017 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
EN 16392-2:2014 Non-destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2: Probes
prEN ISO 18563-2 rev Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes

British Standards Institution (BSI), .Ultrasound detection

BS EN 15317:2013 Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment
BS EN ISO 16810:2014 Non-destructive testing. Ultrasonic testing. General principles
BS EN ISO 16823:2014 Non-destructive testing. Ultrasonic testing. Transmission technique
BS EN ISO 2400:2012 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1
BS EN 14127:2011 Non-destructive testing. Ultrasonic thickness measurement
BS EN ISO 16811:2014 Non-destructive testing. Ultrasonic testing. Sensitivity and range setting
BS EN ISO 11666:2011 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
BS EN ISO 11666:2010 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
BS EN ISO 16827:2014 Non-destructive testing. Ultrasonic testing. Characterization and sizing of discontinuities
BS EN ISO 11666:2018 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
22/30437356 DC BS EN ISO 7963. Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
BS EN ISO 16826:2014 Non-destructive testing. Ultrasonic testing. Examination for discontinuities perpendicular to the surface
BS EN 12668-3:2013 Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Combined equipment
BS EN ISO 17640:2017 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
BS EN ISO 17640:2010 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
BS EN ISO 10863:2020 Non-destructive testing of welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
BS EN ISO 17640:2018 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
BS EN ISO 23243:2020 Non-destructive testing. Ultrasonic testing with arrays. Vocabulary
18/30373433 DC BS ENISO 10863. Non-destructive testing of welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
BS EN ISO 23279:2017 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Characterization of discontinuities in welds
BS EN ISO 13588:2019 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology
BS EN ISO 16828:2014 Non-destructive testing. Ultrasonic testing. Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
BS EN ISO 17405:2014 Non-destructive testing. Ultrasonic testing. Technique of testing claddings produced by welding, rolling and explosion
BS ISO 23864:2021 Non-destructive testing of welds. Ultrasonic testing. Use of automated total focusing technique (TFM) and related technologies
BS EN ISO 23864:2021 Non-destructive testing of welds. Ultrasonic testing. Use of automated total focusing technique (TFM) and related technologies
BS EN ISO 18563-2:2017 Non-destructive testing. Characterization and verification of ultrasonic phased array equipment. Probes
BS EN 16392-2:2014 Non-destructive testing. Characterisation and verification of ultrasonic phased array equipment. Probes
21/30438200 DC BS EN ISO 17405. Non-destructive testing. Ultrasonic testing. Technique of testing claddings produced by welding, rolling and explosion
20/30393141 DC BS ISO 23865. Non-destructive testing. Ultrasonic testing. General use of full matrix capture / total focusing technique (FMC/TFM)
12/30246414 DC BS ISO 12715. Non-destructive testing. Ultrasonic testing. Reference blocks and test procedures for the characterization of contact probe sound beams
BS ISO 23865:2021 Non-destructive testing. Ultrasonic testing. General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
BS EN ISO 20601:2018 Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology for thin-walled steel components
BS EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds
BS EN 17290:2021 Non-destructive testing. Ultrasonic testing. Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
BS EN ISO 22825:2017 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys
BS EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
20/30392796 DC BS ISO 23864. Non-destructive testing of welds. Ultrasonic testing. Use of (semi-) automated full matrix capture / total focusing technique (FMC/TFM)

German Institute for Standardization, .Ultrasound detection

DIN EN 15317:2014-02 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
DIN EN ISO 5577:2017-05 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017); German version EN ISO 5577:2017
DIN EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012); German version EN ISO 16810:2014
DIN EN ISO 16810:2014-07 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012); German version EN ISO 16810:2014
DIN EN ISO 16823:2014-07 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
DIN EN ISO 16809:2020-02 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017); German version EN ISO 16809:2019
DIN EN ISO 11666:2018-05 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018); German version EN ISO 11666:2018
DIN EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
DIN EN ISO 2400:2013-01 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012); German version EN ISO 2400:2012
DIN EN ISO 7963:2023-02 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022); German version EN ISO 7963:2022
DIN EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
DIN EN 583-1:1998 Non-destructive testing - Ultrasonic examination - Part 1: General principles; German version EN 583-1:1998
DIN EN ISO 16811:2014-06 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012); German version EN ISO 16811:2014
DIN EN ISO 16946:2017-07 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017); German version EN ISO 16946:2017
DIN EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
DIN EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
DIN EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017); German version EN ISO 5577:2017
DIN EN ISO 13588:2019-07 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019); German version EN ISO 13588:2019
DIN EN 583-3:1997 Non-destructive testing - Ultrasonic testing - Part 3: Transmission technique; German version EN 583-3:1997
DIN EN ISO 16826:2014-06 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012); German version EN ISO 16826:2014
DIN EN ISO 16827:2014-06 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012); German version EN ISO 16827:2014
DIN EN ISO 10863:2020-09 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020); German version EN ISO 10863:2020
DIN EN ISO 23279:2017-12 Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017); German version EN ISO 23279:2017
DIN EN ISO 16946:2023-08 Non-destructive testing - Ultrasonic testing - Specification for a step wedge calibration block (ISO/DIS 16946:2023); German and English version prEN ISO 16946:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 16946 (2017-07).
DIN EN ISO 17640:2019 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
DIN EN ISO 17640:2019-02 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018); German version EN ISO 17640:2018
DIN EN ISO 22232-1:2021-09 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020); German version EN ISO 22232-1:2020
DIN EN ISO 22232-2:2021-09 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020); German version EN ISO 22232-2:2020
DIN EN ISO 22825:2018-02 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017); German version EN ISO 22825:2017
DIN EN ISO 13588:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
DIN EN ISO 17405:2022-08 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2022); German version EN ISO 17405:2022
DIN EN 10308:2002-03 Non-destructive testing - Ultrasonic testing of steel bars; German version EN 10308:2001
DIN EN ISO 22232-3:2021-09 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020); German version EN ISO 22232-3:2020
DIN EN ISO 22825:2018 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
DIN EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
DIN EN ISO 20601:2019-04 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018); German version EN ISO 20601:2018
DIN EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012); German version EN ISO 16811:2014
DIN EN ISO 22232-2:2018 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO/DIS 22232-2:2018); German and English version prEN ISO 22232-2:2018
DIN EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017); German version EN ISO 16946:2017
DIN EN ISO 22232-1:2018 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments (ISO/DIS 22232-1:2018); German and English version prEN ISO 22232-1:2018
DIN EN ISO 20601:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
DIN EN ISO 23864:2022-04 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021); German version EN ISO 23864:2021
DIN EN ISO 22232-3:2018 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO/DIS 22232-3:2018); German and English version prEN ISO 22232-3:2018
DIN EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012); German version EN ISO 16827:2014
DIN EN 17290:2018 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique; German and English version prEN 17290:2018
DIN EN 17290:2021-12 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique; German version EN 17290:2021
DIN EN ISO 16826:2014 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012); German version EN ISO 16826:2014
DIN EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010); German version EN ISO 17640:2010
DIN EN ISO 20601:2017 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for steel components with small wall thickness (ISO/DIS 20601:2017); German and English version prEN ISO 20601:2017
DIN EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006); German version EN ISO 7963:2010
DIN EN ISO 16828:2014-06 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012); German version EN ISO 16828:2014

KR-KS, .Ultrasound detection

KS B ISO 12710-2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
KS B ISO 16810-2019 Non-destructive testing ― Ultrasonic testing ― General principles
KS B ISO 5577-2022 Non-destructive testing — Ultrasonic testing — Vocabulary
KS B ISO 5577-2016 Non－destructive testing－Ultrasonic inspection－Vocabulary
KS B ISO 16823-2022 Non-destructive testing — Ultrasonic testing —Transmission technique
KS B ISO 11666-2019 Non-destructive testing of welds ― Ultrasonic testing ― Acceptance levels
KS B ISO 2400-2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
KS B ISO 10375-2018 Non-destructive testing — Ultrasonic inspection — Characterization of search unit and sound field
KS B ISO 16827-2022 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
KS B ISO 17640-2019 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
KS B ISO 23279-A-2019 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
KS B ISO 16826-2022 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
KS B ISO 22825-2023 Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
KS B ISO 23243-2022 Non-destructive testing — Ultrasonic testing with arrays — Vocabulary
KS B ISO 20601-2021 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components

Professional Standard - Machinery, .Ultrasound detection

JB/T 8428-2006 Non-destructive testing Blocks for ultrasonic testing
JB/T 10814-2007 Non-destructive testing.Ultrasonic testing by surface wave
JB/T 12466-2015 Non-destructive testing.Specification for ultrasonic probes
JB/T 8428-2015 General specification for non-destructive testing ultrasonic test block
JB/T 10555-2006 Nondesturctive testing.Ultrasonic testing of aivs
JB/T 10555-2013 Nondestructive testing.Ultrasonic testing of aivs
JB/T 11731-2013 Non-destructive testing.General specification for ultrasonic phased array probe

Professional Standard - Civil Aviation, .Ultrasound detection

MH/T 3002-2006 Nondestructive testing in aircraft. Ultrasonic testing
MH/T 3002.4-1997 Nondestructive testing in aircraft.Ultrasonic testing

中国民用航空局, .Ultrasound detection

MH/T 3002-2018 Aircraft non-destructive testing ultrasonic testing

Association Francaise de Normalisation, .Ultrasound detection

NF A09-017*NF EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
NF EN ISO 5577:2017 Essais non destructifs - Contrôle par ultrasons - Vocabulaire
NF EN 15317:2013 Essais non destructifs - Contrôle ultrasonore - Caractérisation et vérification des appareils de mesure de l'épaisseur par ultrasons
NF A09-322:1985 Non destructive testing - Ultrasonic testing - Specifications of ultrasonic probes for industrial use
NF A09-332*NF EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles
NF A09-334*NF EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
NF EN ISO 16823:2014 Essais non destructifs - Contrôle par ultrasons - Technique par transmission
NF EN ISO 16810:2014 Essais non destructifs - Contrôle par ultrasons - Principes généraux
NF EN ISO 16809:2019 Essais non destructifs - Mesurage de l'épaisseur par ultrasons
NF A09-323:1987 Non-destructive testing - Ultrasonic testing - Methods for specifying ultrasonic probes for industrial use
NF EN ISO 2400:2012 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 1
NF A89-521*NF EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
NF EN ISO 7963:2022 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 2
NF A09-333*NF EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
NF EN ISO 16946:2017 Essais non destructifs - Essais par ultrasons - Spécifications relatives aux blocs d'étalonnage à gradins
NF C48-230:1987 Intrusion detection - Ultrasound motion detectors - Specific standard.
NF A09-312*NF EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
NF EN ISO 11666:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Niveaux d'acceptation
NF EN ISO 16811:2014 Essais non destructifs - Contrôle par ultrasons - Réglage de la sensibilité et de la base de temps
NF A09-336*NF EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
NF ISO 19675:2017 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage pour la technique multi-éléments
NF A09-018*NF ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
NF A89-520*NF EN ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
NF EN ISO 16827:2014 Essais non destructifs - Contrôle par ultrasons - Caractérisation et dimensionnement des discontinuités
NF A89-522*NF EN ISO 23279:2017 Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds
NF EN ISO 16826:2014 Essais non destructifs - Contrôle par ultrasons - Contrôle des discontinuités perpendiculaires à la surface
NF EN ISO 17640:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Techniques, niveaux d'essai et évaluation
NF A09-320-1:2010 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1 : instruments.
NF A09-320-1*NF EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1 : instruments
NF A89-524*NF EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
NF EN ISO 22232-1:2020 Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par ultrasons - Partie 1 : appareils
NF A09-324*NF EN 15317:2013 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
NF EN ISO 13588:2019 Essais non destructif des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique multi-éléments automatisés
NF EN ISO 22232-2:2020 Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par ultrasons - Partie 2 : traducteurs
NF EN ISO 17405:2022 Essais non destructifs - Contrôle par ultrasons - Technique d'essai des placages produits par soudage, laminage et explosion
NF A89-523:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys.
NF A89-523*NF EN ISO 22825:2017 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
NF A09-320-3:2013 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: combined equipment
NF A09-320-3:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3 : combined equipment
NF EN ISO 23279:2017 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Caractérisation des discontinuités dans les assemblages soudés
NF EN ISO 10863:2020 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique de diffraction des temps de vol (TOFD)
NF EN ISO 22232-3:2020 Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par ultrasons - Partie 3 : équipement complet
NF A09-337*NF EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
NF A09-327*NF EN ISO 17405:2014 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion
NF EN ISO 22825:2017 Essais non destructif des assemblages soudés - Contrôle par ultrasons - Contrôle des soudures en aciers austénitiques et en alliages à base nickel
NF A89-517*NF EN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies
NF A09-023*NF EN ISO 23243:2020 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary
NF A09-324:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment.
NF A89-514*NF EN ISO 20601:2018 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components
NF A09-341:1991 Non-destructive testing - Ultrasonic testing - Monitoring of equipment - Setting using control cards
NF EN ISO 16828:2014 Essais non destructifs - Contrôle par ultrasons - Technique de diffraction du temps de vol utilisée comme méthode de détection et de dimensionnement des discontinuités
NF EN ISO 20601:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique multi-éléments automatisés pour les composants en acier à paroi mince
NF A09-313*NF EN 17290:2021 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
NF EN 17290:2021 Essais non destructifs - Contrôle par ultrasons - Examen de la perte d'épaisseur due à l'érosion et/ou à la corrosion par la technique TOFD
NF A09-024:2021 Non-destructive testing - Ultrasonic testing - General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
NF ISO 23865:2021 Essais non destructifs - Contrôle par ultrasons - Utilisation générale de l'acquisition de la matrice intégrale/technique de focalisation en tous points (FMC/FTP) et de techniques associées
NF A89-523:2006 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys.
NF A09-022-2:2014 Non destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2 : probes

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, .Ultrasound detection

GB/T 34018-2017 Non-destructive testing—Test method for scanning ultrasonic microscopy
GB/T 34638-2017 Non-destructive testing—Test methods for ultrasonic leak detection
GB/T 34885-2017 Non-destructive testing—Electromagnetic ultrasonic testing—General principles
GB/T 34892-2017 Non-destructive testing—Test method for robotic ultrasonic testing

SE-SIS, .Ultrasound detection

SIS SS 11 42 20-1985 Non-destructive testing - Ultrasonic testing — Steel castings
SIS SS 11 42 01-1984 Non-destructive testing - Ultrasonic testing
SIS SS 11 42 53-1982 Non-destructive testing - Ultrasonic testing - Reference test block type CHNV
SIS SS 11 42 52-1982 Non-destructive testing - Ultrasonic testing - Reference test block type FBHV
SIS SS 11 42 51-1982 Non-destructive testing - Ultrasonic testing - Reference test block type FBHP
SIS SS 11 42 54-1982 Non-destructive testing - Ultrasonic testing - Reference test block type RSNV
SIS SS 11 42 50-1982 Non-destructive testing - Ultrasonic testing - Reference test block type FBHN
SIS 11 40 52-1972 Non-destructive testing. Ultra sonic testing. Terminology
SIS SS 11 40 52-1980 Non-destructive testing — Ultrasonic testing — Terminology

FI-SFS, .Ultrasound detection

NO-SN, .Ultrasound detection

NS 10210-1982 Non-destructive testing - Ultrasonic testing - Calibration block 1

Indonesia Standards, .Ultrasound detection

SNI ISO 16810:2014
SNI ISO 16823:2014
SNI ISO 16831:2014
SNI ISO 2400:2014 Non-destructive testing - Ultrasonic testing -Specification for calibration block No.1
SNI ISO 16826:2014

Standard Association of Australia （SAA）, .Ultrasound detection

AS ISO 16809:2020 Non-destructive testing — Ultrasonic thickness measurement

IT-UNI, .Ultrasound detection

UNI EN ISO 23243:2021 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary
UNI EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments
UNI EN ISO 22232-2:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes
UNI EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment

ES-UNE, .Ultrasound detection

UNE-EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
UNE-EN ISO 16809:2020 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
UNE-EN ISO 23279:2018 Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017)
UNE-EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
UNE-EN ISO 17640:2019 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
UNE-EN ISO 13588:2020 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
UNE-EN ISO 10863:2021 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
UNE-EN ISO 22232-2:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
UNE-EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
UNE-EN ISO 17405:2022 Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2022)
UNE-EN ISO 22232-3:2022 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
UNE-EN ISO 22825:2018 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
UNE-EN ISO 20601:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
UNE-EN ISO 23864:2022 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
UNE-EN 17290:2022 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique

BR-ABNT, .Ultrasound detection

ABNT NBR NM 336-2012 NDT - Ultrasound in welding - Procedure

CEN - European Committee for Standardization, .Ultrasound detection

EN ISO 16809:2019 Non-destructive testing - Ultrasonic thickness measurement
EN ISO 13588:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
EN 583-5:2000 Non-Destructive Testing - Ultrasonic Examination - Part 5: Characterization and Sizing of Discontinuities
EN 12668-3:2000 Non-Destructive Testing - Characterization and Verification of Ultrasonic Examination Equipment - Part 3: Combined Equipment
EN ISO 20601:2018 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components
PREN 17290-2018 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
EN ISO 22825:2006 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys

未注明发布机构, .Ultrasound detection

BS EN 583-1:1999(2008) Non - destructive testing — Ultrasonic examination — Part 1 : General principles
BS EN 583-2:2001(2007) Non - destructive testing — Ultrasonic examination — Part 2 : Sensitivity and range setting
DIN EN 12668-2-A1:2004 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 2: Probes
DIN EN 12668-1-A1:2004 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 1: Testing equipment
BS EN ISO 22232-3:2020 Non - destructive testing — Characterization and verification of ultrasonic test equipment Part 3 : Combined equipment
BS EN ISO 23864:2021(2022) Non - destructive testing of welds — Ultrasonic testing — Use of automated total focusing technique (TFM) and related technologies
BS EN 583-4:2002(2007) Non - destructive testing — Ultrasonic examination — Part 4 : Examination for discontinuities perpendicular to the surface
BS EN 583-5:2001(2008) Non - destructive testing — Ultrasonic examination — Part 5 : Characterization and sizing of discontinuities
DIN EN 583-5:2001 Non-destructive testing – Ultrasonic testing – Part 5: Description and sizing of inhomogeneities; German version EN 583-5:2000
DIN EN 583-4:2002 Non-destructive testing – Ultrasonic testing – Part 4: Testing for inhomogeneity perpendicular to the surface; German version EN 583-4:2002
DIN EN ISO 23864:2022 Non-destructive testing of welded joints – Ultrasonic testing – Use of the automated total focusing method (TFM) and related technologies (ISO 23864:2021)
DIN EN ISO 17640:2018 Non-destructive testing of welded joints – Ultrasonic testing – Techniques, test classes and evaluation (ISO 17640:2017); German version EN ISO 17640:2017
DIN EN ISO 22825 Berichtigung 1:2007 Non-destructive testing of welded joints – Ultrasonic testing – Testing of welded joints in austenitic steels and nickel alloys (ISO 22825:2006)

YU-JUS, .Ultrasound detection

JUS C.A7.051-1997 Non-destruclive testing - Control ofproperties of ultrasonic test systems - Simple controls

Group Standards of the People's Republic of China, .Ultrasound detection

T/CSTM 00697-2023 Non-destructive testing – Ultrasonic testing –Ultrasonic testing method for weld overlay of wellhead and tree products
T/CSTM 00214-2020 Non-destructive testing – Ultrasonic testing –Fabrication and testing method of oblique incident test block with convex surface
T/CSTM 00701-2023 Non-destructive testing – Ultrasonic testing –Fabrication and testing method of oblique incident test block with concave surface
T/CSTM 00208-2020 Non-destructive testing-- Ultrasonic testing method for wheel

VN-TCVN, .Ultrasound detection

TCVN 5115-2009 Non-destructive testing.Ultrasonic testing.Specification for calibration block No.2
TCVN 1548-1987 Non.destructive testing for welded joints.Ultrasonic methods

RU-GOST R, .Ultrasound detection

GOST R 55808-2013 Nondestructive testing. Ultrasonic transducers. Test methods
GOST 26266-1990 Non-destructive testing. Ultrasonic transducers. General technical requirements
GOST 28702-1990 Non-destructive testing. Ultrasonic thickness gauges. General technical requirements
GOST R 55614-2013 Non-destructive testing. Ultrasonic thickness gauges. General technical requirements
GOST R ISO 16831-2016 Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment
GOST R 53205-2008 Non-destructive testing. Evaluation of grains size of steel by ultrasound. General requirements
GOST R 55809-2013 Non-destructive testing. Ultrasonic flaw detectors. Methods of measuring the main parameters
GOST 28369-1989 Nondestructive testing. Ultra-violet sources. General technical requirements and test methods

PL-PKN, .Ultrasound detection

PN-EN ISO 17640-2019-01 P Non-destructive testing of welds -- Ultrasonic testing -- Techniques, testing levels, and assessment (ISO 17640:2018)
PN-EN ISO 10863-2020-12 E Non-destructive testing of welds -- Ultrasonic testing -- Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
PN-EN ISO 22232-2-2021-03 E Non-destructive testing -- Characterization and verification of ultrasonic test equipment -- Part 2: Probes (ISO 22232-2:2020)
PN-EN ISO 22232-1-2021-02 E Non-destructive testing -- Characterization and verification of ultrasonic test equipment -- Part 1: Instruments (ISO 22232-1:2020)
PN-EN ISO 22232-3-2021-03 E Non-destructive testing -- Characterization and verification of ultrasonic test equipment -- Part 3: Combined equipment (ISO 22232-3:2020)
PN-EN ISO 23243-2021-06 E Non-destructive testing -- Ultrasonic testing with arrays -- Vocabulary (ISO 23243:2020)

Japanese Industrial Standards Committee (JISC), .Ultrasound detection

JIS Z 2355-1:2016 Non-destructive testing -- Ultrasonic thickness measurement -- Part 1: Measurement method
JIS Z 2355-2:2016 Non-destructive testing -- Ultrasonic thickness measurement -- Part 2: Method for evaluating performance characteristics of ultrasonic thickness measuring equipment

AT-ON, .Ultrasound detection

OENORM EN ISO 22232-2:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
OENORM EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
OENORM EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
OENORM EN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)

CH-SNV, .Ultrasound detection

SN EN ISO 22232-2:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
SN EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
SN EN ISO 22232-3:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)

RO-ASRO, .Ultrasound detection

STAS R 12500/3-1987 Ultrasonic fault detection CHECKING LP METHODS IX SERVICE OF ULTRASONICFAULT DETECTORS

SAE - SAE International, .Ultrasound detection

SAE AS7114/3A-2008 NADCAP Requirements for Nondestructive Testing Facility Ultrasonic Survey

工业和信息化部/国家能源局, .Ultrasound detection

JB/T 12725-2016 Non-destructive testing instrument ultrasonic automatic testing system