ZH
RU
ES

Principle of measurement

Principle of measurement, Total:100 items.

In the international standard classification, Principle of measurement involves: Wastes, Measurement of force, weight and pressure, Graphical symbols, Tobacco, tobacco products and related equipment, Plastics, Occupational safety. Industrial hygiene, Piezoelectric and dielectric devices, Air quality, Vocabularies, Thermodynamics and temperature measurements, Radiation measurements, Metrology and measurement in general, Energy and heat transfer engineering in general, Acoustics and acoustic measurements, Road vehicle systems, Milk and milk products, Electronic tubes, Textile fibres, Optics and optical measurements, Solar energy engineering, Protection of and in buildings, Galvanic cells and batteries, Optical equipment.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Principle of measurement

ASHRAE 4486-2001 Measureing Principles for the Determination of Ice Concentration in Ice Slurry (RP-1166)

Association of German Mechanical Engineers, Principle of measurement

VDI 3860 Blatt 1-2006 Measurement of landfill gas - Principles
VDI 3491 Blatt 1-2016 Measurement of particles - Methods for generating test aerosols - Principles and overview
VDI/VDE 3512 Blatt 1-2009 Temperature measurement for building automation - Basic principles
VDI/VDE 3512 Blatt 1-2017 Temperature measurement for building automation - Basic principles
VDI 2048 Blatt 1-2000 Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals

German Institute for Standardization, Principle of measurement

DIN 8125-1:2000 Graphical symbols for weighing - Part 1: Fundamental principles, survey
DIN CEN/TS 15279:2006-06 Workplace exposure - Measurement of dermal exposure - Principles and methods; German version CEN/TS 15279:2006
DIN 19745:2006-10 Soil quality - Principles of the determination of the water content by Time Domain Reflectometry (TDR) and Time Domain Transmissometry (TDT)
DIN 45630-1:1971 Physical and subjective magnitudes of sound
DIN 16620-2:1991-09 Printing technology; printing plates for offset printing; terminology and principles of measurement techniques
DIN EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021); German version EN ISO 3219-2:2021
DIN 54200:1974 Testing of textiles; quantitative analysis of fibre mixtures by means of solvent method, basis and field of application
DIN EN 60904-3:2009 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data (IEC 60904-3:2008); German version EN 60904-3:2008

Association Francaise de Normalisation, Principle of measurement

NF V37-025*NF ISO 9512:2019 Cigarettes - Determination of ventilation - Definitions and measurement principles
NF T51-211-2*NF EN ISO 3219-2:2021 Rheology - Part 2 : general principles of rotational and oscillatory rheometry
NF EN ISO 105-J01:2000 Textiles - Essais de solidité des teintures - Partie J01 : principes généraux du mesurage de la couleur de surface
FD X43-248*FD ISO/TR 14294:2011 Workplace atmospheres - Measurement of dermal exposure - Principles and methods
NF EN ISO 2064:2000 Revêtements métalliques et autres revêtements inorganiques - Définitions et principes concernant le mesurage de l'épaisseur
NF ISO 1132-2:2002 Roulements - Tolérances - Partie 2 : principes et méthodes de mesurage et de vérification par calibre
NF X44-051:1978 Dépoussiéreurs - Classification et principes de mesure de leurs caractéristiques
NF V37-025:2003 Cigarettes - Determination of ventilation - Definitions and measurement principles.
NF V37-025:1993 Cigarettes. Determination of ventilation. Definitions and measurment principles.
NF ISO 9512:2019 Cigarettes - Détermination du taux de ventilation - Définitions et principes de mesurage
NF EN ISO 3868:1995 Revêtements métalliques et autres revêtements non organiques - Mesurage de l'épaisseur - Méthode basée sur le principe de Fizeau d'interférométrie à faisceaux multiples.
NF S10-050*NF ISO 15529:2011 Optics and photonics - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems

Korean Agency for Technology and Standards (KATS), Principle of measurement

KS H ISO 9512-2013(2018) Cigarettes－Determination of ventilation－Definitions and measurement principles
KS A ISO 11929-6-2008(2013) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 6：Fundamentals and applications to measurements by use of transient mode
KS A ISO 11929-2-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 2：Fundamentals and application to counting measurements with the influence of sample treatment
KS H ISO 9512:2021 Cigarettes — Determination of ventilation —Definitions and measurement principles
KS A ISO 11929-1-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 1：Fundamentals and application to counting measurements without the influence of sample treatment
KS H ISO 9512:2008 Cigarettes-Determination of ventilation-Definitions and measurement principles
KS H ISO 9512:2013 Cigarettes-Determination of ventilation-Definitions and measurement principles
KS A ISO 11929-8-2008(2013) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 8：Fundamentals and application to unfolding of spectrometric measurements without the influence of
KS A ISO 11929-5-2008(2013) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 5：Fundamentals and applications to counting measurements on filters during accumulation of radioact
KS A ISO 11929-4-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 4：Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without
KS B ISO 15529-2011(2021) Optics and photonics — Optical transfer function — Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
KS B ISO 15529:2011 Optics and photonics-Optical transfer function-Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
KS B ISO 15529-2011(2016) Optics and photonics — Optical transfer function — Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
KS A ISO 11929-3-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 3：Fundamentals and application to counting measurements by high resolution gamma spectrometry witho

British Standards Institution (BSI), Principle of measurement

PD ISO/TR 14294:2011 Workplace atmospheres. Measurement of dermal Exposure. Principles and methods
DD CEN/TS 15279:2006 Workplace exposure — Measurement of dermal exposure — Principles and methods
PD IEC/TS 62758:2012 Calibration of space charge measuring equipment based on the pulsed electroacoustic (PEA) measurement principle
BS ISO 11929-2:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to counting measurements with the influence of sample treatment
BS ISO 11929-1:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to counting measurements without the influence of sample treatment
BS EN ISO 8968-1:2014 Milk and milk products. Determination of nitrogen content. Kjeldahl principle and crude protein calculation
BS EN 15267-1:2009 Air quality - Certification of automated measuring systems - Part 1: General principles
BS ISO 9512:2003 Cigarettes - Determination of ventilation - Definitions and measurement principles
BS ISO 22290:2020 Non-destructive testing. Infrared thermographic testing. General principles for thermoelastic stress measuring method
BS ISO 11929-8:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment
BS EN 60904-3:2008 Photovoltaic devices — Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
BS EN 60904-3:2016 Photovoltaic devices. Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
BS ISO 11929-3:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment
BS 874-1:1986 Methods for determining thermal insulating properties - Introduction, definitions and principles of measurement
BS EN IEC 60904-3:2019 Photovoltaic devices - Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
BS EN ISO 14891:2002 Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle
BS ISO 15529:2010 Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems

Institute of Electrical and Electronics Engineers (IEEE), Principle of measurement

IEEE Std 119-1974 IEEE Recommended Practice for General Principles of Temperature Measurement as Applied to Electrical Apparatus

Danish Standards Foundation, Principle of measurement

DS/ISO 3219-2:2021 Rheology – Part 2: General principles of rotational and oscillatory rheometry
DS/CEN/TS 15279:2006 Workplace exposure – Measurement of dermal exposure – Principles and methods
DS/EN ISO 3219-2:2021 Rheology – Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
DS/IEC/TS 62758:2012 Calibration of space charge measuring equipment based on the pulsed electro-acoustic (PEA) measurement principle

IT-UNI, Principle of measurement

UNI EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry

VN-TCVN, Principle of measurement

TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments

International Commission on Illumination (CIE), Principle of measurement

CIE 41-1978 Light as a True Visual Quantity: Principles of Measurement (1st Edition) (Reprint 1994) (E)

Standard Association of Australia （SAA）, Principle of measurement

AS/NZS 2772.2:2011
AS/NZS 2772.2:2016 Radiofrequency fields, Part 2: Principles and methods of measurement and computation — 3 kHz to 300 GHz

AT-ON, Principle of measurement

OENORM EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)

CH-SNV, Principle of measurement

SN EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
SNV 24547
VSM 34218.2-1938

Lithuanian Standards Office , Principle of measurement

LST EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)

PL-PKN, Principle of measurement

PN-EN ISO 3219-2-2021-10 E Rheology -- Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)

IEC - International Electrotechnical Commission, Principle of measurement

TS 62758-2012 Calibration of space charge measuring equipment based on the pulsed electroacoustic (PEA) measurement principle (Edition 1.0)

Society of Automotive Engineers (SAE), Principle of measurement

SAE J1574-2-2005 Measurement of Vehicle and Suspension Parameters for Directional Control Studies--Rationale
SAE J1574-2-2012 Measurement of Vehicle and Suspension Parameters for Directional Control Studies--Rationale
SAE J1574/2-2000 Measurement of Vehicle and Suspension Parameters for Directional Control Studies--Rationale
SAE J1574/2-2012 Measurement of Vehicle and Suspension Parameters for Directional Control Studies - Rationale
SAE J1574/2-2018 Measurement of Vehicle and Suspension Parameters for Directional Control Studies - Rationale
SAE J1574/2-2005 Measurement of Vehicle and Suspension Parameters for Directional Control Studies--Rationale

SAE - SAE International, Principle of measurement

SAE J1574-2-2018 Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Mechanical Tubing@ and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution Heat Treated@ Precipitation Hardenable
SAE J1574-2-2000 Measurement of Vehicle and Suspension Parameters for Directional Control Studies - Rationale

Professional Standard - Tobacco, Principle of measurement

YC/T 158-2002 Cigarettes----Determination of ventilation----Definitions and measurement principles

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Principle of measurement

GB/T 19610-2004 Cigarettes-Determination of ventilation-Definitions and measurement principles
GB/T 11186.1-1989 Methods for measuring the colour of paint films--Part 1:Principles
GB 11186.1-1989 The measurement method of the color of the coating film, the first part of the principle
GB/T 6495.3-1996 Photovoltaic devices. Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data

KR-KS, Principle of measurement

KS H ISO 9512-2021 Cigarettes — Determination of ventilation —Definitions and measurement principles
KS B ISO 15529-2023 Optics and photonics — Optical transfer function — Principles of measurement of modulation transfer function(MTF) of sampled imaging systems

International Organization for Standardization (ISO), Principle of measurement

ISO 9512:2019 Cigarettes — Determination of ventilation — Definitions and measurement principles
ISO 9512:2002 Cigarettes - Determination of ventilation - Definitions and measurement principles
ISO 9512:1993 Cigarettes; determination of ventilation; definitions and measurement principles
ISO 15529:1999 Optics and optical instruments - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
ISO 22290:2020 Non-destructive testing - Infrared thermographic testing - General principles for thermoelastic stress measuring method
ISO 15529:2007 Optics and photonics - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
ISO 15529:2010 Optics and photonics - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems

NO-SN, Principle of measurement

NS 4930-1984 Principles for the measurement and the evaluation of human exposure to vibration transmitted to the hand

RU-GOST R, Principle of measurement

GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
GOST 21011.0-1975 High-voltage kenotrons. Methods measurements of electric parameters. General requirements

European Committee for Standardization (CEN), Principle of measurement

prEN 60904-3-1993 Photovoltaic devices; part 3: measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data (IEC 904-3:1989)